Log in

Relevant bibliographies by topics / Solid nickel's etching / Journal articles

To see the other types of publications on this topic, follow the link: Solid nickel's etching.

Journal articles on the topic 'Solid nickel's etching'

Author: Grafiati

Published: 8 June 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 20 journal articles for your research on the topic 'Solid nickel's etching.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Setyarini, Putu Hadi, Elvin Stefano, and Slamet Wahyudi. "STUDY OF ELECTROLESS NICKEL PLATING ON RAPID PROTOTYPING MODEL USING ACRYLONITRILE BUTADIENE STYRENE." Jurnal Rekayasa Mesin 13, no. 1 (2022): 275–81. http://dx.doi.org/10.21776/ub.jrm.2022.013.01.27.

Full text

Abstract:

Electroless plating on Acrylonitrile Butadiene Styrene (ABS) is a metallization process that involves a reduction and oxidation reaction between the nickel source and the substrate material. The purpose of this research is to determine the ability of nickel deposition in the nickel electroless plating process with a specific etching time variation. This nickel electroless procedure begins with a chromic acid etching process that can last anywhere from 15 to 55 minutes and is useful for increasing roughness and creating submicroscopic cavities. After the etching process is finished, the surface

APA, Harvard, Vancouver, ISO, and other styles

2

Hołówko, Bartosz, Jakub Karczewski, Sebastian Molin, and Piotr Jasiński. "Preparation of Hydrogen Electrodes of Solid Oxide Cells by Infiltration: Effects of the Preparation Procedure on the Resulting Microstructure." Materials 13, no. 1 (2019): 131. http://dx.doi.org/10.3390/ma13010131.

Full text

Abstract:

In this work, the infiltration technique was used to produce hydrogen electrodes for solid oxide cells. Different infiltration methodologies were tested in order to try to shorten the infiltration cycle time. The porous scaffolds used for infiltration were based on highly porous yttria-stabilized zirconia (YSZ) obtained by etching the reduced nickel from the Ni-YSZ cermet in HNO3 acid. The support had a complex structure which included a ~130 µm porous functional layer with small pores and a ~320 µm thick supporting layer with large pores. Infiltrations have been carried out using aqueous nick

APA, Harvard, Vancouver, ISO, and other styles

3

Gu, Yuan, and John Federici. "Fabrication of a Flexible Current Collector for Lithium Ion Batteries by Inkjet Printing." Batteries 4, no. 3 (2018): 42. http://dx.doi.org/10.3390/batteries4030042.

Full text

Abstract:

A novel chemical process has been developed to formulate injectable nickel ink for conductive film. This chemical method has the ability to remove the oxidation on nickel nano-particle surfaces during ink fabrication; the nickel ions, which are produced during chemical etching, will be reduced and bridged among original nano-nickel particles in the following thermal sintering process at 350 °C. X-ray diffraction results exhibit that the final nickel film has no significant composition change by this chemical method and that oxidation has been effectively removed. Scanning electron microscopy i

APA, Harvard, Vancouver, ISO, and other styles

4

Horny, Paula, Dominique Drouin, Raynald Gauvin, and Gianluigi A. Botton. "Characterization of Phase Transformation by Fe-SEM and Fe-TEM Analysis." Microscopy and Microanalysis 7, S2 (2001): 490–91. http://dx.doi.org/10.1017/s143192760002852x.

Full text

Abstract:

The formation of a silicon alloy has been achieved by electron beam irradiation of a nickel-silicon bilayer. This process, called SiDWEL1 , has been developed by Quantiscript. The nickel-silicon bilayer is very thin and the electron beam operates at low energy and current. Silicide formation occurred around the interaction volume of the electrons within the material. This paper describes the nature of the structures produced and the origin of the difficulties encountered with the characterization. The necessity of further analysis with TEM based techniques is highlighted.Figure 1 presents a cr

APA, Harvard, Vancouver, ISO, and other styles

5

Wittek, Christian-G. R., Lukas Steinhoff, Selina Raumel, Michael Reißfelder, Folke Dencker, and Marc C. Wurz. "Process Development for Batch Production of Micro-Milling Tools Made of Silicon Carbide by Means of the Dry Etching Process." Micromachines 14, no. 3 (2023): 580. http://dx.doi.org/10.3390/mi14030580.

Full text

Abstract:

Downsized and complex micro-machining structures have to meet quality requirements concerning geometry and convince through increasing functionality. The development and use of cutting tools in the sub-millimeter range can meet these demands and contribute to the production of intelligent components in biomedical technology, optics or electronics. This article addresses the development of double-edged micro-cutters, which consist of a two-part system of cutter head and shaft. The cutting diameters are between 50 and 200 μm. The silicon carbide cutting heads are manufactured from the solid mate

APA, Harvard, Vancouver, ISO, and other styles

6

Wada, Yuri, Kaori Miyamoto, Takatoshi Yamada, and Toru Kuzumaki. "Forming an Optically Transparent Graphene Film via the Transformation of C₆₀ Molecules." Materials Science Forum 1016 (January 2021): 1549–54. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.1549.

Full text

Abstract:

This study aims to optimize the production conditions for forming graphene directly on a quartz substrate, using a carbon 60 (C60) thin film as a solid carbon source. In this experiment, we focused on the relationships between the thickness of the C60 film and the nickel (Ni) catalyst film and the heat treatment conditions. As the thicknesses of the C60 and Ni catalyst films increased, high-crystallinity multi-layered graphene was formed, however the optical transparency of the graphene film decreased. Scanning Electron Microscopy (SEM) observations and Raman scattering spectroscopy showed tha

APA, Harvard, Vancouver, ISO, and other styles

7

Shahana, Chatterjee, S. Ruoff Rodney, Yeon Kim Na, et al. "Synthesis of Highly Oriented Graphite Films with a Low Wrinkle Density and Near-Millimeter-Scale Lateral Grains." Chemistry of Materials 32 (April 1, 2020): 3134−3143. https://doi.org/10.1021/acs.chemmater.0c00154.

Full text

Abstract:

Principal defects found in graphite films include grain boundaries and wrinkles. These defects are well known to have detrimental effects on properties such as thermal and electrical conductivities as well as mechanical properties. With a two-fold objective of synthesizing graphite films with large single crystal grains and no wrinkles, we have developed a relatively low-temperature (<1150 °C) process that involves the precipitation of graphite films from nickel–carbon solid solutions followed by in-situ etching of the nickel foil substrates with anhydrous chlorine gas to obtain <

APA, Harvard, Vancouver, ISO, and other styles

8

Nakanishi, Kazuhiro, Hiroki Kuroshima, Tsubasa Matsumoto, Takao Inokuma, and Norio Tokuda. "Atomically flat diamond (100) surface formation by anisotropic etching of solid-solution reaction of carbon into nickel." Diamond and Related Materials 68 (September 2016): 127–30. http://dx.doi.org/10.1016/j.diamond.2016.06.011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Usenko, Alex, Shailesh Dhungana, Anthony N. Caruso, and Stteven L. Bellinger. "Electroless Nickel Plating for Ohmic Contacts to Silicon Power Devices." ECS Meeting Abstracts MA2022-02, no. 23 (2022): 960. http://dx.doi.org/10.1149/ma2022-0223960mtgabs.

Full text

Abstract:

Silicon diodes, FETs, IGBTs still keep the majority of power device market, being much cheaper compared to SiC and GaN wide band gap-based devices. To keep the Si devices competitive, their manufacturing processes must be significantly improved. This includes forming Ohmic contacts. Currently the common process is PVD – physical vapor deposition of metal stacks. This process is not efficient: not selective and wasteful - metal sputtered or evaporated from target coats entire vacuum chamber, not just wafer being processed. Electroless deposition can be potentially used for metallization of Si p

APA, Harvard, Vancouver, ISO, and other styles

10

Kuruma, Takuya, Takayuki Yamamura, Takashi Miura, Daisuke Magori, and Hitohiko Ide. "Improvement of Ionic Conductivity and Suppression of Gas Generation in LiNi_0.5Mn_1.5O₄ Cathode Material By Using P-Ta Aqueous Coating Solution." ECS Meeting Abstracts MA2024-02, no. 5 (2024): 617. https://doi.org/10.1149/ma2024-025617mtgabs.

Full text

Abstract:

With the increasing demand for electrification of mobility, there are high expectations in recent years for improving the quick-charging performance of batteries. However, conventional lithium-ion batteries have a limited recharging speed due to safety concerns, such as heat generation during rapid recharging. Against this backdrop, batteries using lithium titanate (LTO), which has a spinel-type crystal structure with excellent charge acceptance, as the negative electrode have been attracting attention. The combination of lithium nickel manganese oxide (LNMO), which has the same spinel-type st

APA, Harvard, Vancouver, ISO, and other styles

11

Dung, Nguyen Tien. "Studying the shape of nickel particles when machining by ultrasound-aided electric discharge." Modern Physics Letters B, February 24, 2023. http://dx.doi.org/10.1142/s0217984923400195.

Full text

Abstract:

This paper presents a model for producing nano-microparticles by ultrasound-aided electric discharge. After machining, scanning electron microscopy (SEM) was used to check the shape and size of the nickel particles; they were found to be distributed in a few micrometers to 80 [Formula: see text]m range. The nickel particles were regular spherical shaped, and the grain sizes of the particles were different. In addition, many small particles were attached to the surface. Various methods such as inlay polishing, nitric acid etching, and direct SEM imaging were employed to determine the hollow nic

APA, Harvard, Vancouver, ISO, and other styles

12

Rey-Mermet, Samuel, and Paul Muralt. "Materials and Design Study for Micromachined Solid Oxide Fuel Cells Membranes." MRS Proceedings 972 (2006). http://dx.doi.org/10.1557/proc-0972-aa07-10-bb08-10.

Full text

Abstract:

AbstractMiniature solid oxide fuel cells (μSOFC) are very promising energy sources for portable devices. In this work we report on fabrication and on first experimental results of μSOFCs processed by means of silicon and thin film technology. All the layers involved in the PEN (Positive electrode-Electrolyte-Negative electrode) structure were sputter deposited on silicon wafer. The PEN membrane was liberated using deep silicon dry etching. The cathode is a combination of a very fine platinum grid covered by a thin LSC layer. The electrolyte is a bilayer of YSZ and CGO ionic conductors. Scannin

APA, Harvard, Vancouver, ISO, and other styles

13

Kumar, Ashish, and Mark E. Law. "Level Set Modeling of Nickel Silicide Growth." MRS Proceedings 1429 (2012). http://dx.doi.org/10.1557/opl.2012.1520.

Full text

Abstract:

ABSTRACTLevel set methods have been used for Solid phase epitaxial regrowth, etching and deposition.This study is to model the growth of nickel silicide accurately using the level set method. NiSi growth has been observed to follow a linear-parabolic law which takes into account both diffusion and interfacial reaction. This linear-parabolic system is very similar to the Deal and Grove model of SiO2 growth. This model uses similar diffusion transport and reaction rate equations. This simulation models the growth of silicide coupling diffusion solutions to level-set techniques. Dual level sets h

APA, Harvard, Vancouver, ISO, and other styles

14

Xu, Wanjie, Yuanzhi Chen, Markus Niederberger, Elena Tervoort, Jie Mei, and Dong‐Liang Peng. "Self‐Assembled Preparation of Porous Nickel Phosphide Superparticles with Tunable Phase and Porosity for Efficient Hydrogen Evolution." Small, January 16, 2024. http://dx.doi.org/10.1002/smll.202309435.

Full text

Abstract:

AbstractSelf‐assembly of colloidal nanoparticles enables the easy building of assembly units into higher‐order structures and the bottom‐up preparation of functional materials. Nickel phosphides represent an important group of catalysts for hydrogen evolution reaction (HER) from water splitting. In this paper, the preparation of porous nickel phosphide superparticles and their HER efficiencies are reported. Ni and Ni2P nanoparticles are self‐assembled into binary superparticles via an oil‐in‐water emulsion method. After annealing and acid etching, the as‐prepared Ni‐Ni2P binary superparticles

APA, Harvard, Vancouver, ISO, and other styles

15

Bhuiyan, Md Emran Hossain, Ali Behroozfar, Soheil Daryadel, Salvador Moreno, Seyedreza Morsali, and Majid Minary-Jolandan. "A Hybrid Process for Printing Pure and High Conductivity Nanocrystalline Copper and Nickel on Flexible Polymeric Substrates." Scientific Reports 9, no. 1 (2019). http://dx.doi.org/10.1038/s41598-019-55640-7.

Full text

Abstract:

AbstractPrinting functional devices on flexible substrates requires printing of high conductivity metallic patterns. To prevent deformation and damage of the polymeric substrate, the processing (printing) and post-processing (annealing) temperature of the metal patterns must be lower than the glass transition temperature of the substrate. Here, a hybrid process including deposition of a sacrificial blanket thin film, followed by room environment nozzle-based electrodeposition, and subsequent etching of the blanket film is demonstrated to print pure and nanocrystalline metallic (Ni and Cu) patt

APA, Harvard, Vancouver, ISO, and other styles

16

Ebrahim, Rabi, Mukhtar Yeleuov, Ainur Issova, Serekbol Tokmoldin, and Alex Ignatiev. "Triple-phase boundary and power density enhancement in thin solid oxide fuel cells by controlled etching of the nickel anode." Nanoscale Research Letters 9, no. 1 (2014). http://dx.doi.org/10.1186/1556-276x-9-286.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Ding, Luoyi, Yuanmao Chen, Yeliang Sheng, Xinyang Yue, and Zheng Liang. "Eliminating Hydrogen Fluoride through Piperidine‐Doped Separators for Stable Li Metal Batteries with Nickel‐Rich Cathodes." Angewandte Chemie International Edition, August 30, 2024. http://dx.doi.org/10.1002/anie.202411933.

Full text

Abstract:

Hydrofluoric acid (HF)‐induced electrode and interfacial structure degeneration poses a significant challenge for high‐voltage lithium metal batteries (LMBs). To address this issue, we propose a separator strategy that involves decorating a regular polyethylene (PE) separator with molecular sieves (TW) impregnated with piperidine (PI). The porous structure of the TW serves as a reaction chamber for PI and HF. As a result, the HF content in the controlled electrolyte with 500 ppm H2O (ELE‐500) is notably reduced when using TW@PI‐PE separators, thereby shielding nickel‐rich cathodes from HF etch

APA, Harvard, Vancouver, ISO, and other styles

18

Ding, Luoyi, Yuanmao Chen, Yeliang Sheng, Xinyang Yue, and Zheng Liang. "Eliminating Hydrogen Fluoride through Piperidine‐Doped Separators for Stable Li Metal Batteries with Nickel‐Rich Cathodes." Angewandte Chemie, August 30, 2024. http://dx.doi.org/10.1002/ange.202411933.

Full text

Abstract:

Hydrofluoric acid (HF)‐induced electrode and interfacial structure degeneration poses a significant challenge for high‐voltage lithium metal batteries (LMBs). To address this issue, we propose a separator strategy that involves decorating a regular polyethylene (PE) separator with molecular sieves (TW) impregnated with piperidine (PI). The porous structure of the TW serves as a reaction chamber for PI and HF. As a result, the HF content in the controlled electrolyte with 500 ppm H2O (ELE‐500) is notably reduced when using TW@PI‐PE separators, thereby shielding nickel‐rich cathodes from HF etch

APA, Harvard, Vancouver, ISO, and other styles

19

Chen, Bo-Yu, Chong-Chi Chi, Wen-Kuang Hsu, and Hao Ouyang. "Synthesis of SiC/SiO2 core–shell nanowires with good optical properties on Ni/SiO2/Si substrate via ferrocene pyrolysis at low temperature." Scientific Reports 11, no. 1 (2021). http://dx.doi.org/10.1038/s41598-020-80580-y.

Full text

Abstract:

AbstractIn this study, the high-density SiC/SiO2 core–shell nanowires were synthesized on the nickel coated SiO2 (100 nm)/Si substrate by chemical vapor deposition (CVD) method with ferrocene precursor at temperature 1000 °C compared to previous studies (1300–1600 °C). The present work provides an efficient strategy for the production of SiC/SiO2 nanowires with uniform morphology and good optical properties, where the Ni layer plays important roles for this fabrication at low temperature which reduces the decomposition temperature of hydrocarbon gases and improves the growth quality of SiC nan

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Bo-Yu, Chong-Chi Chi, Wen-Kuang Hsu, and Hao Ouyang. "Synthesis of SiC/SiO2 core–shell nanowires with good optical properties on Ni/SiO2/Si substrate via ferrocene pyrolysis at low temperature." Scientific Reports 11, no. 1 (2021). http://dx.doi.org/10.1038/s41598-020-80580-y.

Full text

Abstract:

AbstractIn this study, the high-density SiC/SiO2 core–shell nanowires were synthesized on the nickel coated SiO2 (100 nm)/Si substrate by chemical vapor deposition (CVD) method with ferrocene precursor at temperature 1000 °C compared to previous studies (1300–1600 °C). The present work provides an efficient strategy for the production of SiC/SiO2 nanowires with uniform morphology and good optical properties, where the Ni layer plays important roles for this fabrication at low temperature which reduces the decomposition temperature of hydrocarbon gases and improves the growth quality of SiC nan

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!