Books on the topic 'Solidification Processing'

Conference on Solidification Processing (4th 1997 University of Sheffield). Solidification processing 1997. Sheffield: Dept. of Engineering Materials, University of Sheffield, 1997.

International, Symposia on Advanced Materials and Technology for the 21st Century (1995 Honolulu Hawaii). Solidification science and processing. Warrendale, Pa: The Minerals, Metals & Materials Society, 1996.

International Symposia on Advanced Materials and Technology for the 21st Century (1995 Honolulu, Hawaii). Solidification science and processing. Warrendale, Pa: The Minerals, Metals & Materials Society, 1996.

1946-, Yu Kuang-O., ed. Modeling for casting and solidification processing. New York: Marcel Dekker, 2002.

United States. National Aeronautics and Space Administration, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Center, Lewis Research, ed. The mathematical modeling of rapid solidification processing. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

University of Sheffield. Dept. of Metallurgy. and Institute of Metals, eds. Solidification processing 1987: Proceedings of the third international conference. London: Institute of Metals, 1988.

United States. National Aeronautics and Space Administration., ed. The volume change during solidification. Washington D.C: National Aeronautics and Space Administration, 1985.

T, Tenhover, Johnson W. L. 1948-, Tanner L. E, and Materials Research Society, eds. Science and technology of rapidly quenched alloys: Symposium held December 1-3, 1986, Boston, Massachusetts, U.S.A. Pittsburgh, Pa: Materials Research Society, 1987.

Merton, C. Flemings Symposium on Solidification and Materials Processing (2000 Cambridge Mass ). Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing. Warrendale, Pa: TMS, 2001.

1949-, Liebermann Howard H., ed. Rapidly solidfied alloys: Processes, structures, properties, applications. New York: M. Dekker, 1993.

Fredriksson, Hasse, and Ulla Åkerlind. Solidification and Crystallization Processing in Metals and Alloys. Chichester, UK: John Wiley & Sons, Ltd, 2012. http://dx.doi.org/10.1002/9781119975540.

Otooni, Monde A., ed. Science and Technology of Rapid Solidification and Processing. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0223-0.

Eskin, Dmitry G., and Jiawei Mi, eds. Solidification Processing of Metallic Alloys Under External Fields. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94842-3.

A, Otooni Monde, North Atlantic Treaty Organization. Scientific Affairs Division., and NATO Advanced Research Workshop on Science and Technology of Rapid Solidification and Processing (1994 : New York, NY), eds. Science and technology of rapid solidification and processing. Dordrecht: Kluwer Academic Publishers, 1995.

Ulla, Akerlind, ed. Solidification and crystallization processing in metals and alloys. Chichester, West Sussex, Eng: Wiley, 2012.

Otooni, Monde A. Science and Technology of Rapid Solidification and Processing. Dordrecht: Springer Netherlands, 1995.

Poorman, Richard M. Space Processing Applications Rocket (SPAR) project: SPAR X final report. Huntsville, Ala: Marshall Space Flight Center, 1986.

Symposium, Rohatgi Honorary. Solidification processing of metal matrix composites: Rohatgi Honorary Symposium. Warrendale, PA: The Minerals, Metals & Materials Society, 2008.

A, Ahmad N., and National Institute of Standards and Technology (U.S.), eds. Solute trapping and solute drag in a phase-field model of rapid solidification. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

A, Ahmad N., and National Institute of Standards and Technology (U.S.), eds. Solute trapping and solute drag in a phase-field model of rapid solidification. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

J, Lavernia Enrique, Gungor M. N, and TMS Synthesis and Analysis in Materials Processing Committee., eds. Microstructural design by solidification processing: Proceedings of a symposium sponsored by the TMS Synthesis, Control, and Analysis in Materials Processing Committee held during Materials Week '92 in Chicago, Illinois, November 1-5, 1992. Warrendale, Pa: Minerals, Metals & Materials Society, 1992.

Rapid solidification technology for reduced consumption of strategic materials. Park Ridge, N.J., U.S.A: Noyes Publications, 1985.

F. Weinberg International Symposium on Solidification Processing (1990 Hamilton, Ont.). F. Weinberg International Symposium on Solidification Processing: Proceedings of the F. Weinberg International Symposium on Solidification Processing, Hamilton, Ontario, August 27-29, 190. Edited by Lait J. E, Samaresekera Indira Vasanti 1952-, and Metallurgical Society of CIM. Basic Sciences Section. Elmsford, NY: Pergamon Press, 1990.

Tekkō Kiso Kyōdō Kenkyūkai. Tekkō no Kyūsoku Gyōko Bukai. Kyūsoku gyōko purosesu no kiso to ōyō: Tekkō no Kyūsoku Gyōko Bukai hōkokusho = Science and technology of rapid solidification. Tōkyō: Nihon Tekkō Kyōkai, 1989.

A, Vasilʹev V., and Mitin Boris Sergeevich, eds. Vysokoskorostnoe zatverdevanie razplava: Teorii͡a︡, tekhnologii͡a︡ i materialy. Moskva: "SP Intermet Inzhiniring", 1998.

1936-, Tewari S. N., and Lewis Research Center, eds. Primary arm spacing in directionally solidified Pb-10 wt % Sn alloys. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1990.

Tewari, S. N. Primary arm spacing in chill block melt spun Ni-Mo alloys. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Conference on Rapid Solidification Processing (4th 1986 Santa Barbara, CA). Rapid solidification processing: Principles and technologies : the fourth Conference on Rapid Solidification processing, December 15-18, 1986, University of California, Santa Barbara, California, USA. Baton Rouge, Fla: Claitor's Pub. Division, 1988.

Inc, Technical Insights, ed. Rapid solidification technology: Key to new metals, alloys, ceramics. Englewood/Fort Lee, NJ: Technical Insights, Inc., 1987.

H, Froes F., Savage S. J, and American Society for Metals. Materials Processing Committee., eds. Processing of structural metals by rapid solidification: Proceedings of a seven session symposium on enhanced properties in structural metals via rapid solidification. [Metals Park, Ohio]: ASM International, 1987.

L, Regelʹ L., Wilcox William R, and International Workshop on Materials Processing at High Gravity (3rd : 1996 : Clarkson University), eds. Centrifugal materials processing. New York: Plenum Press, 1997.

MRS International Meeting on Advanced Materials (1st 1988 Tokyo, Japan). Powder preparation ; Rapid quenching: June 1-June 3, 1988, Sunshine City, Ikebukuro, Tokyo, Japan. Edited by Akashi Kazuo 1928- and Materials Research Society. Pittsburgh, Pa: Materials Research Society, 1989.

A, Otooni Monde, ed. Elements of rapid solidification: Fundamentals and applications. Berlin: Springer, 1998.

tadeusz, kulik. Pervai͡a︡ Mezhdunarodnai͡a︡ konferent͡s︡ii͡a︡ po bystroĭ zakalke metallicheskikh splavov, Varna, 11-17 mai͡a︡ 1987. [Varna?]: SĖV, 1987.

1931-, Steeb S., Warlimont Hans 1931-, and Deutsche Forschungsgemeinschaft, eds. Rapidly quenched metals: Proceedings of the Fifth International Conference on Rapidly Quenched Metals, Würzburg, Germany, September 3-7, 1984. Amsterdam: North-Holland, 1985.

E, Borowitz, and United States. National Aeronautics and Space Administration., eds. Investigation of the microstructure of rapidly solidified alloys. [Washington, DC: National Aeronautics and Space Administration, 1987.

International Conference on Rapidly Quenched Metals (6th 1987 Montréal, Québec). Rapidly quenched metals 6: Proceedings of the Sixth International Conference on Rapidly Quenched Metals, Montreal, August 3-7, 1987. Edited by Cochrane R. W and Ström-Olsen J. O. London: Elsevier, 1988.

tadeusz, kulik. First International Conference on Rapidly Quenched Metal Alloys: Varna, May 11-17, 1987. Edited by Morgenthal Jutta. Dresden: Akademie der Wissenschaften der DDR, Zentralinstitut für Festkörperphysik und Werkstofforschung, 1987.

H, Froes F., Eylon Daniel, Metallurgical Society of AIME. Titanium Committee., and Metallurgical Society of AIME. Meeting., eds. Titanium, rapid solidification technology: Proceedings for the four session symposium on "Titanium, Rapid Solidification Technology," sponsored by the Titanium Committee of The Metallurgical Society held at the 1986 TMS-AIME Annual Meeting, New Orleans, Louisiana, March 2-6, 1986. Warrendale, Pa: Metallurgical Society, 1986.

International Conference on Rapidly Quenched Materials (7th 1990 Stockholm, Sweden). Rapidly quenched materials: Proceedings of the Seventh International Conference on Rapidly Quenched Materials, Stockholm, Sweden, 13-17 August 1990. Edited by Frederiksson H, Savage S, and Nygren Mats. Amsterdam: Elsevier, 1991.

F, Matthys Eric, Kushner Brian G. 1958-, TMS Process Monitoring and Control Committee., TMS Solidification Committee., ASM-MSM Synthesis and Processing of Materials Committee., Minerals, Metals and Materials Society. Fall Meeting, and Minerals, Metals and Materials Society. Meeting, eds. Advanced sensing, modelling, and control of materials processing. Warrendale, Pa: Minerals, Metals & Materials Society, 1992.

M, Stefanescu D., Abbaschian G. J, Bayuzick R. J, and Minerals, Metals and Materials Society. Fall Meeting, eds. Solidification processing of eutectic alloys: Proceedings of a symposium ... held at the TMS Fall Meeting, October 12-15, 1988, Cincinnati,Ohio. Wasrrendale, Pa: The Metallurgical Society, 1988.

C, Suryanarayana, ed. Non-equilibrium processing of materials. Amsterdam: Pergamon, 1999.

Center, Lewis Research, ed. Undercooling, rapid solidification, and relations to processing in low Earth orbit (A review of the works of Bingbo Wei). [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1999.

Center, Lewis Research, ed. Undercooling, rapid solidification, and relations to processing in low Earth orbit (A review of the works of Bingbo Wei). [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1999.

Center, Lewis Research, ed. Undercooling, rapid solidification, and relations to processing in low Earth orbit (A review of the works of Bingbo Wei). [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1999.

Meeting, Metallurgical Society of AIME Northeast Regional. Rapidly solidified crystalline alloys: Proceedings of a TMS-AIME Northeast Regional Meeting sponsored by the Metallurgical Society New Jersey Chapter and by the Materials Research Society, held at Morristown, New Jersey, May 1-3, 1985. Warrendale, Pa: Metallurgical Society, 1985.

International Conference on Rapidly Solidified Materials (2nd 1988 San Diego, Calif.). Rapidly solidified materials: Properties and processing : proceedings of the 2nd International Conference on Rapidly Solidified Materials, San Diego, California, 7-9 March 1988. [Metals Park, Ohio]: ASM International, 1988.

International Conference on Rapidly Quenched Metals (6th 1987 Montréal, Québec). Rapidly quenched metals 6: Proceedings of the Sixth International Conference on Rapidly Quenched Metals, Montréal, August 3-7, 1987. Edited by Cochrane R. W and Ström-Olsen J. O. London: Elsevier Applied Science, 1988.