Log in

Relevant bibliographies by topics / SolidWorks (Computer software) / Journal articles

To see the other types of publications on this topic, follow the link: SolidWorks (Computer software).

Journal articles on the topic 'SolidWorks (Computer software)'

Author: Grafiati

Published: 4 June 2021

Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'SolidWorks (Computer software).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Yasa, Mahendri Cakra, Rido Budiman, and Sya’baningrum Prihartini. "PELATIHAN DESAIN SOLIDWORKS 2D & 3D KEPADA SISWA MENENGAH KEJURUAN DI DESA SEGARAN." An-Nizam 1, no. 3 (2022): 93–99. http://dx.doi.org/10.33558/an-nizam.v1i3.5406.

Full text

Abstract:

The world of education is currently facing an industrial revolution, for the younger generation it is necessary to prepare in terms of abilities in the computer field. For vocational students, the ability that must be improved is to be skilled at using computers to design as a development in drawing technique subjects. Based on the school's mission, one of which is to strive for the quality of vocational education services in accordance with the demands of the business community and the industrial world, so training on computer drawing techniques needs to be added specifically. One of the deve

APA, Harvard, Vancouver, ISO, and other styles

2

Khoroshko, Leonid Leonidovich, Peter A. Ukhov, and Pavel P. Keyno. "Development of Massive Open Online Courses Based on 3D Computer Graphics and Multimedia." International Journal of Engineering Pedagogy (iJEP) 9, no. 4 (2019): 4. http://dx.doi.org/10.3991/ijep.v9i4.10193.

Full text

Abstract:

This work is devoted to the creation of a laboratory workshop (virtual) for open online courses based on programs of three-dimensional computer graphics and multimedia. The issues of using SolidWorks, Autodesk® 3DS MAX software in distance learning are discussed. The software was used to prepare training materials for the courses course "Machines and mechanisms theory", "Computer Graphics" and "Engineering and Computer Graphics". Using the software product SolidWorks, Autodesk® 3DS MAX has significantly increased the visibility of the course and develop tools for organizing the independent wor

APA, Harvard, Vancouver, ISO, and other styles

3

Bałdowska-Witos, Patrycja, Marek Macko, Daniel Łączny, Weronika Kruszelnicka, and Jakub Lewandowski. "Computer-aided Eco-design Grinding Machines using Software SolidWorks Sustainability." MATEC Web of Conferences 357 (2022): 02022. http://dx.doi.org/10.1051/matecconf/202235702022.

Full text

Abstract:

The publication presents selected results of an attempt to link material and environmental valuation with the design of technical objects in accordance with the requirements of the concept of Life Cycle Management. The goal of this action was to develop environmental analysis of the conical shredder using the SolidWorks Sustainability application. The assessment of environmental impacts included: extraction of raw materials, material processing, production of parts, assembly, use of the product, landfill storage and transport. Based on the results of the analysis, the potential emission levels

APA, Harvard, Vancouver, ISO, and other styles

4

Hindroyuwono, Rinto, Rachmat Anggi Marvianto, Eliev Fajar Almaida, and Yunus Bakhtiar Arafat. "Static Loading Simulation on Temporary Platform and Ladder Absorbent Chamber Design." International Journal of Engineering Continuity 3, no. 1 (2024): 118–25. http://dx.doi.org/10.58291/ijec.v3i1.247.

Full text

Abstract:

This study utilizes SolidWorks software to thoroughly examine the structural layout and static load simulation of a temporary platform and ladder in an adsorbent chamber. SolidWorks, a computer-aided design (CAD) and computer-aided engineering (CAE) software, offers robust tools for 3D modeling, simulation, and analysis, making it ideal for this type of structural assessment. Finite element analysis (FEA), a simulation model within SolidWorks, is employed to determine stress distribution and safety factors. The results demonstrate the platform's maximum stress at 198.65 MPa, below the yield st

APA, Harvard, Vancouver, ISO, and other styles

5

Prasetyo, Ahmad, Asep Tiroy Pardamean Sihole, Meutia Dwina Khairunisa, Muhammad Najibbulloh, and RAhmita Atmayati. "Implementasi Software Solidworks dalam Perancangan Produksi Lemari untuk Efisiensi Waktu Produksi." SCIENTIFIC JOURNAL OF REFLECTION : Economic, Accounting, Management and Business 8, no. 1 (2025): 164–69. https://doi.org/10.37481/sjr.v8i1.1030.

Full text

Abstract:

The design of furniture products, such as cabinets, requires precision and considerable time, especially in the design and prototyping stages. With the development of technology, the use of computer-aided design (CAD) software such as Solidworks is a solution to improve efficiency in product design. This journal discusses the implementation of Solidworks in cabinet planning, with a focus on reducing production time and improving design accuracy. Through the use of Solidworks, the design process can be digitized, allowing designers to create more accurate and easily modifiable 3D models, and re

APA, Harvard, Vancouver, ISO, and other styles

6

Hu, Zhi Xin, Jiu Nan Xu, and Ling Xiao Weng. "Modeling and Simulation of Mechatronic Technology Based on Intelligent Network Control." Applied Mechanics and Materials 716-717 (December 2014): 1599–603. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.1599.

Full text

Abstract:

This paper designs a new mechatronic modeling and simulation platform, which uses Solidworks to establish the mechanical model, and uses LabVIEW intelligent network library function to realize mechatronic control. Combining with VC software it realizes the simulation results visualized output, which realizes the co-simulation design of SolidWorks, LabVIEW and VC software. With the help of this system, engineers can establish mechanical model by computer software, and use interdisciplinary field theory to analyze the product key performance indicators in the virtual operating environment, furth

APA, Harvard, Vancouver, ISO, and other styles

7

Zabolotnyi, K., and V. Temchenko. "Research of the influence of dynamic loads on butterfly valves using computer modeling." Collection of Research Papers of the National Mining University 77 (June 2024): 207–17. http://dx.doi.org/10.33271/crpnmu/77.207.

Full text

Abstract:

Purpose. The development of a methodology for conducting verification calculations of adjustable butterfly valves using computer modeling and analysis technologies. Implementation of the developed methodology for the DXO DN 400 PN 2.5 valve. The methods. The geometric modeling of the DXO DN 400 PN 2.5 valve is carried out using the SolidWorks software. The obtained solid assembly is used to create computational models to investigate the valve’s performance. The SolidWorks Flow Simulation 2016 module is used for modeling hydrodynamic processes, while SolidWorks Simulation is used to study the v

APA, Harvard, Vancouver, ISO, and other styles

8

Tan, Chung-Ming, and Mau-Yiu Chang. "Finite Element Analysis of Cylindrical Rubber Fender." MATEC Web of Conferences 207 (2018): 02008. http://dx.doi.org/10.1051/matecconf/201820702008.

Full text

Abstract:

This research is to develop a methodology to optimize the performance of fenders using finite element analysis. The design of fender geometry is done using software SolidWorks. Simulation is one of several add-in tools in SolidWorks. The finite element analysis of the performance of the fender designed is then evaluated by simulation tool in SolidWorks. This study also shows the potential applications of computer aided engineering and its benefits in verifying and reinventing various fenders design.

APA, Harvard, Vancouver, ISO, and other styles

9

Maiorov, A. A. "Comparative analysis of surface modeling in computer-aided design systems." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 1 (April 10, 2025): 85–89. https://doi.org/10.21122/1683-6065-2025-1-85-89.

Full text

Abstract:

This study presents a comprehensive analysis of the surface modeling capabilities of two leading contemporary computeraided design (CAD) software packages: KOMPAS-3D and SOLIDWORKS. The research focuses on evaluating their efficiency in creating complex components using surface modeling tools. As a test case, a geometrically intricate component – the VM-sinus mandrel for mold sleeves with a 125×125 mm cross-section – was selected. These copper sleeves play a crucial role in the primary cooling of molten metal within the crystallizer, ensuring the formation of a precisely shaped ingot. Given th

APA, Harvard, Vancouver, ISO, and other styles

10

biomej, M. Ikhsan, L. Edahwati biomej, RD Issafira biomej, et al. "Static Loading Analysis on Universal Joint Using Solidworks." BIOMEJ 2, no. 2 (2022): 41–44. http://dx.doi.org/10.33005/biomej.v2i2.60.

Full text

Abstract:

This static loading analysis introduction training aims to analyze parts universal joints to the tensile test as an effort to accelerate the improvement of vocational teachers' abilities. In the introduction to analysis training this time using software CAD/CAM ie solidworks which is one software CAD/ CAM which is widely used in the manufacturing industry in terms of designing or analyzing a product design. The training method is carried out by first installing solidworks software to computer equipment, secondly making parts from universal joints, third assembling from parts that have been mad

APA, Harvard, Vancouver, ISO, and other styles

11

Feng, Su Li, Guang Yu Zhang, and Zhi Gang Tian. "Computer Simulation of a Certain Heavy Vehicle Part." Advanced Materials Research 1014 (July 2014): 192–95. http://dx.doi.org/10.4028/www.scientific.net/amr.1014.192.

Full text

Abstract:

This paper used software Solidworks to build 3-D model of a certain Heavy Vehicle Part, then analyzed the model strain state under typical operation condition by ANSYS. The simulation of the part provides the basis for the structural design.

APA, Harvard, Vancouver, ISO, and other styles

12

Saleh Al-Hammadi, Abdullah Sharaf, Syafiqah Saidin, and Muhammad Hanif Ramlee. "Simulation Analyses Related to Human Bone Scaffold: Utilisation of Solidworks® Software in 3D Modelling and Mechanical Simulation Analyses." Journal of Human Centered Technology 1, no. 2 (2022): 97–104. http://dx.doi.org/10.11113/humentech.v1n2.28.

Full text

Abstract:

Bone loss is risen due to fractures, surgeries and traumatic injuries. Scientists and engineers work over the years to find solutions to heal and accelerate bone regeneration. Bone grafting technique has been utilised which projects significant improvement in bone regeneration area. An extensive study is essential on the relation between the mechanical properties of bone scaffolds and the design of bone scaffolds in forecasting permeability access to promote bone growth and nutrient distribution. In reducing cost and time, mechanical simulation analyses are beneficial to simulate the relation.

APA, Harvard, Vancouver, ISO, and other styles

13

Saleh Al-Hammadi, Abdullah Sharaf, Syafiqah Saidin, and Muhammad Hanif Ramlee. "Simulation Analyses Related to Human Bone Scaffold: Utilisation of Solidworks® Software in 3D Modelling and Mechanical Simulation Analyses." Journal of Human Centered Technology 1, no. 2 (2022): 97–104. http://dx.doi.org/10.11113/humentech.v1n2.28.

Full text

Abstract:

Bone loss is risen due to fractures, surgeries and traumatic injuries. Scientists and engineers work over the years to find solutions to heal and accelerate bone regeneration. Bone grafting technique has been utilised which projects significant improvement in bone regeneration area. An extensive study is essential on the relation between the mechanical properties of bone scaffolds and the design of bone scaffolds in forecasting permeability access to promote bone growth and nutrient distribution. In reducing cost and time, mechanical simulation analyses are beneficial to simulate the relation.

APA, Harvard, Vancouver, ISO, and other styles

14

Maulana, Sigit Ugi, Yopi Handoyo, and Setyo Supratno. "PELATIHAN SOLIDWORKS UNTUK MENDESAIN BENDA KERJA DI DESA WANASARI." An-Nizam 1, no. 2 (2022): 120–26. http://dx.doi.org/10.33558/an-nizam.v1i2.3620.

Full text

Abstract:

The world of education is currently facing the industrial revolution 4.0, for the younger generation it is necessary to prepare in terms of abilities in the computer field. Facing the ASEAN Economic Community, competition in the job market is very wide open. The tight world of industrial competition requires workers who are ready to work. Science and technology programs for the community, especially for youth, are intended to help align with the needs of the business world. Training in drawing techniques using computers must be added specifically, one of which is with the necessary development

APA, Harvard, Vancouver, ISO, and other styles

15

Afanasyev, Mikhail Petrovich, and Timur Faritovich Tuliakov. "COMPUTER-AIDED DESIGN OF MECHATRONIC MACHINE EQUIPMENT LAYOUTS USING THE SOLIDWORKS SOFTWARE PACKAGE." Sovremennaya nauka i innovatsii, no. 4 (2022): 31–40. http://dx.doi.org/10.37493/2307-910x.2022.4.3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Korendiy, V., O. Kachur, V. Kyrychuk, and B. Markovych. "Mathematical modeling and computer simulation of locomotion conditions of vibration-driven robots." Mathematical Modeling and Computing 11, no. 4 (2024): 1211–20. https://doi.org/10.23939/mmc2024.04.1211.

Full text

Abstract:

This paper investigates the dynamic behavior and locomotion characteristics of vibration-driven robots with wheeled chassis, focusing on the comparison of two types of vibration exciters: a solenoid-type actuator and a centrifugal (inertial) exciter. The research methodology involves 3D modeling using SolidWorks software to design the robots, numerical modeling in Mathematica software to simulate their motion and predict kinematic characteristics, and computer simulation in SolidWorks Motion software to validate the modeling results. The robots utilize overrunning clutches to ensure unidirecti

APA, Harvard, Vancouver, ISO, and other styles

17

Yusof, N. S. B., A. S. M. Rafie, M. K. A. M. Ariffin, and N. Othman. "Validation of Flow Impact to Detect the Energy Loss in Ball Valve." Applied Mechanics and Materials 564 (June 2014): 281–86. http://dx.doi.org/10.4028/www.scientific.net/amm.564.281.

Full text

Abstract:

Researchers especially from engineering field are using Computer Fluid Dynamic (CFD) software to simulate the three dimension (3D) model before they perform any experiments to prove their theories. The aim of this study is to develop a valve model in 3D using Solidworks software and to analyze internal fluid flow using Solidworks Flow Simulation (SWF) software to prove that this software has the capability in performing fluid simulations for the ball valve. The SWF successfully calculates the value of outlet velocity for the ball valve at different closing angles and different pressures value.

APA, Harvard, Vancouver, ISO, and other styles

18

Panchenko, O. "Substantiating a method for computer analysis of the stress-strain state of the tubbing erector manipulator mechanism." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 4 (August 2023): 62–67. http://dx.doi.org/10.33271/nvngu/2023-4/062.

Full text

Abstract:

Purpose. To develop and substantiate a method for computer analysis of the stress-strain state that occurs in the tubbing erector manipulator mechanism with several degrees of freedom, using modern computing complexes based on the finite-element method. Methodology. The research uses software complexes, with the help of which a calculation-theoretical apparatus has been created, which is intended for calculating dynamic and static loads that occur in the elements of the tubbing erector manipulator mechanism. The results of modeling the stress-strain state in the parts and nodes of this mechani

APA, Harvard, Vancouver, ISO, and other styles

19

Rudyk, O. Yu, M. M. Poberezhnyi, P. V. Kaplun, and V. A. Gonchar. "APPLICATION OF COMPUTER-INTEGRATED TECHNOLOGIES IN MODERN ENGINEERING SYSTEMS." System technologies 4, no. 159 (2025): 37–45. https://doi.org/10.34185/1562-9945-4-159-2025-05.

Full text

Abstract:

In modern conditions of development, analysis of the strength of parts is impossible without the comprehensive use of modern computer-aided design systems, one of which is the SolidWorks CAD/CAE system and its application – SolidWorks Simulation. This work deter-mines the dependence of the maximum stress acting on the gear block of the drum of the UVN-74 vacuum spraying installation at full load on the number of finite elements of its mod-el. The first stage in analysing the stress-strain state of a gear blocking the SolidWorks Simu-lation environment is to select the type of study (static ana

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Tian, Xuan Xuan Yan, and Zhong Hai Yu. "The Research and Development of VB and Solidworks-Based 3D Fixture Component Library." Applied Mechanics and Materials 300-301 (February 2013): 301–5. http://dx.doi.org/10.4028/www.scientific.net/amm.300-301.301.

Full text

Abstract:

The rise of the Flexible Manufacturing System (FMS) and the Computer Integrated Manufacturing System (CIMS) put forward a more urgent need for the practical fixture design software. 3D Visual Basic-based standard parts library is proposed in this paper. By calling the Application Program Interface (API) functions of Solidworks as the secondary development, the 3D standard parts library is established. And then the application program is made as plug-in to hanging onto the menu of Solidworks operating environment. When the assembly design starts, users can select the standard parts they need by

APA, Harvard, Vancouver, ISO, and other styles

21

Derevyanchuk, Oleksandr, Alyona Lovska, Vasyl Ravluk, Mickolay Dominikov, and Yaroslav Derevianchuk. "Modern approach to computer modeling of functional 3d objects in the professional training of future engineers and vocational education teachers." Edelweiss Applied Science and Technology 8, no. 6 (2024): 5939–56. http://dx.doi.org/10.55214/25768484.v8i6.3290.

Full text

Abstract:

This article examines the features of computer modeling of functional 3D objects using the SolidWorks software suite, which is an integral component in the training of future engineers and vocational education teachers. The SolidWorks software suite provides tools not only for creating three-dimensional models but also for analyzing the mechanical properties of parts and visualizing the technical condition of objects. This enables future engineers and vocational education teachers to better understand the principles of designing and analyzing complex part structures. A step-by-step algorithm f

APA, Harvard, Vancouver, ISO, and other styles

22

Fialkova, Evgenia, Vladimir Baronov, Aleksandr Slobodin, and Konstantin Nechaev. "SolidWorks flow simulation software potential in hydrodynamic processes analysis for cone vortex emulsion." E3S Web of Conferences 402 (2023): 03007. http://dx.doi.org/10.1051/e3sconf/202340203007.

Full text

Abstract:

The purpose of this work is to compare the hydrodynamic data of the real flow simulated by SolidWorks Flow Simulation in an emulsor of vortex type. The object of the study is an emulsion, in the central part of the energy separation chamber of which a zone of low pressure, the cavitation zone, is created. In this zone the dispersion phase collapses. Computer simulation of fluid dynamics of the emulsification process has been suggested to optimise the design of this type of emulsor. To check adequacy of results of modelling and real process, visualization and comparative evaluation of shape of

APA, Harvard, Vancouver, ISO, and other styles

23

Wan Ting Xie, Wan Ting Xie, Po Lun Hou Wan Ting Xie, Chun Hsien Chiang Po Lun Hou, and Han Chien Lin Chun Hsien Chiang. "Finite Element Method Application in Computer-Aided Design for Bio-mimetic Chair Research." 電腦學刊 35, no. 3 (2024): 095–106. http://dx.doi.org/10.53106/199115992024063503008.

Full text

Abstract:

<p>Wood is a primary material in furniture design and development. However, amid the global carbon reduction discourse, the efficient utilization of wooden resources has become a pertinent topic. Therefore, this study employed Taiwan&rsquo;s Laminated Veneer Lumber (LVL) made from cypress as the material. Through computer-aided design simulations and verification, we designed a Bionic Design Chair (BC) and three sets of commonly found chairs known as Traditional Modeling Chairs (TC). These were analyzed for stress and displacement using Solidworks software. The seating surfaces were

APA, Harvard, Vancouver, ISO, and other styles

24

Rivas Hernández, Edgar Isaac, and Oscar Farrerons Vidal. "Beyond Boundaries: Integrating SolidWorks and eLamX in Designing, Simulating, and Validating a Mechanical Female Left Arm Low-Elbow Prosthesis for CrossFit Training." Proyecta56, an Industrial Design Journal 5, no. 1 (2025): 65–77. https://doi.org/10.24310/p56-idj.5.1.2025.19239.

Full text

Abstract:

The objective of this work was to design a mechanical prosthesis tailored to below-elbow agenesis using a polymer matrix composite material (epoxy resin) reinforced with laminated carbon fiber (prepreg). The design process involved considering the patient's current condition and idealizing the potential tensional stress the component would endure during service conditions. SolidWorks, a computer-aided design software, facilitated the design process, while a customized material library of composite sheet materials, incorporating material parameters and orientations, was established manually. Us

APA, Harvard, Vancouver, ISO, and other styles

25

Raghul, T., G. Nagalaxman, and M. P. Anbarasi. "Bridge Gateway for Solid Works to URDF and Integration with Robot Operating System." Bridge Gateway for Solid Works to URDF and Integration with Robot Operating System 8, no. 11 (2023): 10. https://doi.org/10.5281/zenodo.10100293.

Full text

Abstract:

Unified Robot Description Format (URDF) integration of mechanical designs from SolidWorks, a well-known computer-aided design (CAD) software, into the Robot Operating System (ROS) ecosystem is essential for seamless robotic simulations and control. In order to bridge the gap between SolidWorks CAD models and ROS-compatible URDF files, this paper presents a thorough methodology for the conversion process. Exporting SolidWorks models, comprehending the structure and syntax of URDF, defining links, joints, visual, and collision properties, and integrating transformational and inertial data are al

APA, Harvard, Vancouver, ISO, and other styles

26

Мачуга, O. С., and Т. В. Олянишен. "Using Solidworks Simulation tool for automated design of drying chambers and study of their operation parameters." Scientific Bulletin of UNFU 34, no. 2 (2024): 109–15. http://dx.doi.org/10.36930/40340214.

Full text

Abstract:

The paper proposes a modern approach to the automated design of three-dimensional models of wood drying chambers and the study of their operation parameters using the SolidWorks Simulation tool, which makes it possible to create various information models using computer tools. Therefore, in this paper, a three-dimensional model of a wood drying chamber was developed and presented, which includes its main components: walls, ceilings, door, stacks of lumber to be dried, a fresh air supply system, a system for its circulation through fans and heating through heaters. For the automated design of t

APA, Harvard, Vancouver, ISO, and other styles

27

Ferdi Kurniawan, Ahmad Khairun Faizin, Wahyu Dwi Lestari, et al. "Program Pelatihan Perancangan Desain Universal Joint Sederhana Menggunakan Solidworks Kepada Para Guru di SMK Turen." Abdi-mesin: Jurnal Pengabdian Masyarakat Teknik Mesin 2, no. 1 (2022): 46–55. http://dx.doi.org/10.33005/abdi-mesin.v2i1.31.

Full text

Abstract:

Abstrak - Program pelatihan perancangan universal joint merupakan salah satu wujud transfer of knowledge yang dilakukan untuk mengakselerasi peningkatan kemampuan guru SMK yang masih jarang mendapatkan pelatihan / upgrade skill dari instisusi diluar sekolah. Pada pelatihan kali ini digunakan software CAD (Computer Aided Design) “SOLIDWORKS” yang merupakan salah satu aplikasi CAD yang banyak digunakan dalam industri manufaktur dalam hal perancangan suatu desain produk. Program pelatihan ini diberikan kepada guru SMK yang terpilih sebanyak 10 guru di SMK Turen. Pelatihan dilaksanakan selama 2 ha

APA, Harvard, Vancouver, ISO, and other styles

28

Wasit Chaikumming. "Computer Geometric Modeling and CFD Simulation of Air Permeability in Knitted Fabrics." Journal of Information Systems Engineering and Management 10, no. 14s (2025): 09–20. https://doi.org/10.52783/jisem.v10i14s.1989.

Full text

Abstract:

The purpose of this study is to model the geometry of knitted fabric structures to predict air permeability using computational fluid dynamics (CFD). Rib 1×1 and interlock structures were simulated with varying loop densities and plain weft-knitted fabric models. The geometrical models of plain weft-knitted fabrics were studied using the Peirce model, the Leaf and Glaskin model, the Vassiliadis model, and Kurbak model, which considers the real shape of knit loops in three-dimensional space. A unit cell for each model was created with a single line of yarn path using SolidWorks software. Comput

APA, Harvard, Vancouver, ISO, and other styles

29

Shkut, A. "A methodological approach to assessing the durability of welded structures of screens using SolidWorks Simulation software." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 6 (December 23, 2023): 79–85. http://dx.doi.org/10.33271/nvngu/2023-6/079.

Full text

Abstract:

Purpose. To develop methodological recommendations for studying the characteristics of screen welded assemblies of ГВЧ-31 С type using specialized tools of the SolidWorks Education Edition software package. Methodology. The methodology for analyzing welds when designing a vibrator fixation system is based on the use of current software tools, in particular SolidWorks Simulation in combination with SolidWorks Motion, as well as the HOT SPOT STRESS technology. To analyze the accuracy of determining the dynamic loads arising during the screen operation, the results of modeling using the SolidWork

APA, Harvard, Vancouver, ISO, and other styles

30

Panchenko, O. "Integrated approach to analyzing the stress-strain state of the tubbing erector manipulator mechanism based on the SolidWorks program." Collection of Research Papers of the National Mining University 74 (September 2023): 230–40. http://dx.doi.org/10.33271/crpnmu/74.230.

Full text

Abstract:

Purpose. The research purpose is todevelop and substantiate a method for computer analysis of the stress-strain state that occurs in the tubbing erector manipulator mechanism with several degrees of freedom, using modern computing complexes based on the finite-element method. Methods. The research uses software complexes, with the help of which a calculation-theoretical apparatus has been created, which is intended for calculating dynamic and static loads that occur in the elements of the tubbing erector manipulator mechanism. The results of modeling the stress-strain state in the parts and no

APA, Harvard, Vancouver, ISO, and other styles

31

Wang, Wen Yan, Jing Pei Xie, Ji Wen Li, et al. "Casting Process Simulation of the Ball Milling Machine End Cover with a Hug Diameter." Materials Science Forum 575-578 (April 2008): 98–103. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.98.

Full text

Abstract:

The solidification process, the formation mechanism and distribution law of microporosity of the ball milling machine head cover made by SVEDALA corporation of USA were simulated by computer. The Solidworks software was used to generate three-dimensional model of cast parts and the Hua-casting software was employed to simulate the casting process. The simulated results show that significant microporosity was found in the middle of two casting heads and at the place of gudgeon journal because of insufficient chilling degree. The processing rationality was judged through the computer-aided techn

APA, Harvard, Vancouver, ISO, and other styles

32

Paškevičius, Paulius, Saulius Nagurnas, Gintautas Bureika, and Vidas Žuraulis. "RESEARCH INTO THE RELIABILITY OF THE BRIDGE OF A CAR CARRIER PLATFORM / AUTOMOBILVEŽIO PLATFORMOS TILTELIO PATIKIMUMO TYRIMAS." Mokslas - Lietuvos ateitis 5, no. 5 (2013): 541–45. http://dx.doi.org/10.3846/mla.2013.85.

Full text

Abstract:

The paper deals with the strength analysis of structural devices(platform bridges) that fasten cars to a car carrier frame. Theloads of all bridges are evaluated along with the indication ofthe areas of load concentration. The paper presents a brief structuraldescription of platform bridges, including their drawingsperformed with the help of SolidWorks software. The bridgeloads have been analyzed applying Ansys software. Accordingto the results of computer simulation of the loads, dangerousstructural areas of the bridges have been identified. While makingattempts to solve the established struc

APA, Harvard, Vancouver, ISO, and other styles

33

Li, Yu He, Peng Xu, and Xin Li Bai. "Computer Aided Design Based on Visual FORTRAN and AutoCAD." Advanced Materials Research 628 (December 2012): 245–48. http://dx.doi.org/10.4028/www.scientific.net/amr.628.245.

Full text

Abstract:

Aimed at disadvantages of tedious work of the gear teeth design, Visual Fortran is taken as the development platform, and design data are stored and managed by self-developed program and database technology. A CAD System for Gear Teeth named GTCS is researched and developed. The system integrates designing and drawing in a body, and fully uses the powerful numerical calculation function of Visual Fortran and the function of Windows interface design, as well as the secondary development function of AutoCAD and database technology, etc. The software can realize designing and calculating of invol

APA, Harvard, Vancouver, ISO, and other styles

34

Staszuk, Marcin, and Marcin Nabialek. "Simularea computerizata a testului de tractiune statica folosind metoda elementelor finite." Materiale Plastice 54, no. 2 (2017): 225–28. http://dx.doi.org/10.37358/mp.17.2.4821.

Full text

Abstract:

The work presents the results of a computer simulation of one of the most widespread strength tests, i.e. a static tensile test, performed with the use of two design tools - ANSYS and SolidWorks software. Strength tests were performed with the ZWICK Z100 tensile machine. The shaped sections used in the analysis were made of AW-6060 aluminium alloy. The computer simulation results were referenced to the actual tensile test results and it was found they are comparable. It can be concluded on such basis that a computer simulation is an alternative to time-consuming and costly laboratory tests.

APA, Harvard, Vancouver, ISO, and other styles

35

Raykovskaya , Galyna, and Andrii Shostachuk . "DESIGNING THE CONTENT OF GRAPHIC KNOWLEDGE IN THE CAD SYSTEMS ENVIRONMENT." Scientific Bulletin of Uzhhorod University. Series: «Pedagogy. Social Work», no. 2(49) (December 18, 2021): 169–73. http://dx.doi.org/10.24144/2524-0609.2021.49.169-173.

Full text

Abstract:

The information support of the product life’s cycle requires to produce and to design this product with the help of the modern graphic CAD packages by creating an information model. In this regard, the question of the introduction of information technology in the educational process of the graphic training becomes relevant, as the basic graphic training forms the skills of graphic presentation of information. The purpose of the article is to substantiate the content of graphic training in institutions of higher technical education in conjunction with special software CAD-systems, including Sol

APA, Harvard, Vancouver, ISO, and other styles

36

Wang, Guo Hui, and Bo Zhao. "Dynamic Analysis of Electrical Control Components under Tank Gun Firing Impact." Applied Mechanics and Materials 628 (September 2014): 235–39. http://dx.doi.org/10.4028/www.scientific.net/amm.628.235.

Full text

Abstract:

To acquire the dynamic characteristics of electrical control component under tank gun firing impact, the author simplified tank structure, combined the three-dimensional modeling software Solidworks and dynamics simulation software ADAMS, constructed a full vehicle dynamics simulation model of a main battle tank and simulated the firing of tank gun. The compare between experimental and simulated results proved the validity and reliability of this model. This set the foundation for the analysis of fault principles of fire control computer and its internal structure under the impact of tank gun

APA, Harvard, Vancouver, ISO, and other styles

37

KHARZHEVSKYI, VIACHESLAV, MAKSYM MARCHENKO, VITALII TKACHUK, and OLEH BEREZIUK. "SYNTHESIS OF ADJUSTABLE MECHANISM OF SEWING MACHINE AND ITS KINEMATIC ANALYSIS USING SOLIDWORKS." Herald of Khmelnytskyi National University. Technical sciences 329, no. 6 (2023): 380–85. http://dx.doi.org/10.31891/2307-5732-2023-329-6-380-385.

Full text

Abstract:

The paper is dedicated to the task of optimal design of eight-linked linkage mechanism of the chain stitch sewing machine, for which it is necessary to solve the problem of the adjustable stroke of the needle. The algorithm and corresponding formulas for conducting a kinematic study of the specified mechanism are presented in the article that allows conducting the optimization design using different criteria. The results of calculations using kinematic research formulas are already given, that made it possible to determine the optimal limits of the needle stroke. The conducted research also to

APA, Harvard, Vancouver, ISO, and other styles

38

Tan, Chung Ming, and Gin Yei Lin. "An Innovative Compression Mold Design for Manufacture of Reel Mower Helical Blades." Applied Mechanics and Materials 851 (August 2016): 255–58. http://dx.doi.org/10.4028/www.scientific.net/amm.851.255.

Full text

Abstract:

This research is focused on the helical blades used in the reel mower machine which uses 5 to 10 helical blades. These blades are normally manufactured using the roll forming process which has certain demerits. This research is done to develop a new process known as compression process for the manufacture of blades using computer aided engineering. To save cost, time as well as waste of material the computerized simulation process is being used. The design of the blade and the die for the compression and modification are done using software SolidWorks. Simulation is performed using software DE

APA, Harvard, Vancouver, ISO, and other styles

39

Wu, Zi Yuan, Zhong Ji, Ren Liu, and Guo Fang Zhang. "Web-Based CAD System for Wooden Box." Applied Mechanics and Materials 200 (October 2012): 502–6. http://dx.doi.org/10.4028/www.scientific.net/amm.200.502.

Full text

Abstract:

Wooden box designing is usually carried out in SolidWorks or such general CAD systems. By secondary development on general CAD system using high level programming language such as Visual Basic, we can create a dedicated CAD system for wooden box. However these dedicated systems are mostly local computer based and not easy for sharing on Internet. In this paper, a web-based CAD system for wooden box has been established by combining PHP language and MySQL database with a localized dedicated CAD system for wooden box. With this system, we can design wooden boxes on the webpages without the insta

APA, Harvard, Vancouver, ISO, and other styles

40

Khelifi, Cherif, Mohammed Ouali, Fateh Ferroudji, and L. Adjilout. "Modeling and Static Analysis of an Areogenerator Savonius Cracked by Using SolidWorks/CosmosWorks Software." Applied Mechanics and Materials 446-447 (November 2013): 744–50. http://dx.doi.org/10.4028/www.scientific.net/amm.446-447.744.

Full text

Abstract:

The increasing complexity of rotating machinery and atrocity competitions of current industrial sectors to launch a new designs on markets or to improve products quality and to reduce design cycle and operating cost, request overload use of the computer industrial software. The presence of cracks in the frameworks may lead to a dangerous and catastrophic effect on the static behavior and cause serious damage to the system. However, modeling and static analysis of frameworks is also a crucial stage preliminary to the fabricate process. It is allowed to predicting performances, optimizing system

APA, Harvard, Vancouver, ISO, and other styles

41

Widya Sinta Mustika, Romiyadi Romiyadi, Yudi Dwianda, Adi Febrianton, Purnama Irwan, and Indah Purnama Putri. "Peningkatan Kompetensi CAD Bagi Siswa SMK Melalui Pelatihan Static Simulation Menggunakan Solid Works." Indonesia Bergerak : Jurnal Hasil Kegiatan Pengabdian Masyarakat 2, no. 2 (2024): 01–06. http://dx.doi.org/10.61132/inber.v2i2.219.

Full text

Abstract:

Vocational education in the senior level, namlely Vocational High School (SMK), is designed to prepare graduates with high skills who are ready to compete in the work zone, both with competence and through entrepreneurship in order to face the demographic bonus. SMK Negeri 1 Bangkinang as a partner of the Politeknik Kampar has a major in the Mechanical Engineering. Generally, the major of Mechanical Engineering will be prepared in with competencies of Computer Aided Design (CAD). However, there are limitations to apply Solid Works software, which is currently in great demand in the industry. T

APA, Harvard, Vancouver, ISO, and other styles

42

Zhang, Li Zhen, Chao Lv, and Jun Tao Li. "Study on 3D CAD System of Extruder." Advanced Materials Research 466-467 (February 2012): 592–95. http://dx.doi.org/10.4028/www.scientific.net/amr.466-467.592.

Full text

Abstract:

The extruder is the key device to produce extrusion feed and food. Since different raw materialsi require different structural and technological parameters, the parametric design method must be used when an extruder is designed. The 3D (3-dimensional) software now available is just universal design platform, so the further development must be done based on universal software to realize the automatic design of machines for special purpose. In this paper the further development is carried out and the CAD (Computer Aided Design) system for the 3D parametric design of extruder is developed based o

APA, Harvard, Vancouver, ISO, and other styles

43

Magdiyev, Shovkat Pulatovich, Soyib Ortiqovich Narziyev, and Murodjon Iskandarovich Rakhmatov. "SOLVING OPTIMIZATION PROBLEMS IN THE DESIGN AND PRODUCTION OF DRIVESHAFTS FOR VEHICLES USING COMPUTER MODELLING." Modern Scientific Research International Scientific Journal 2, no. 1 (2024): 197–205. https://doi.org/10.5281/zenodo.10515751.

Full text

Abstract:

The analysis of the stress-strain state of the main assemblies of the cardan shaft of trucks, which determine its resource – the u-joint cross and splined joint, was carried out in the SolidWorks software environment. The bench tests of the cardan shaft showed the adequacy of the developed virtual models of its elements. According to the results of virtual and bench tests, the directions of design, technological and material science solutions for improving the cardan shaft are proposed.

APA, Harvard, Vancouver, ISO, and other styles

44

Tzotzis, Anastasios, Athanasios Manavis, Nikolaos Efkolidis, and Panagiotis Kyratsis. "CAD-BASED AUTOMATED G-CODE GENERATION FOR DRILLING OPERATIONS." International Journal of Modern Manufacturing Technologies 13, no. 3 (2021): 177–84. http://dx.doi.org/10.54684/ijmmt.2021.13.3.177.

Full text

Abstract:

The automated generation of G-code for machining processes is a valuable tool at the hands of every engineer and machinist. Nowadays, many software systems exist that provide automated functions related to G-code generation. Most free software require the import of a Drawing Exchange Format (DXF) file and cannot work directly on a 3D part. On the contrast, the equivalent commercially-available software systems are feature-rich and can provide a variety of automated processes, but are usually highly priced. The presented application aims to supplement the existing free Computer Aided Manufactur

APA, Harvard, Vancouver, ISO, and other styles

45

Zokhidov, O. U., O. O. Khoshimov, and Sh Sh Khalilov. "Experimental analysis of microges installation for existing water flows in industrial plants." E3S Web of Conferences 463 (2023): 02023. http://dx.doi.org/10.1051/e3sconf/202346302023.

Full text

Abstract:

Calculation and analysis of the existing potential of low-pressure water flow at the engineering facilities of JSC “NGMK” (Joint Stock Company, Navoi Mining and Metallurgical Combine) is carried out, nomogram for determining the power of water flow based on the head and flow rate is created. The impeller design was analyzed by means of CAD (Computer Aided Design System) SOLIDWORKS software package, the optimal number of water impeller blades was revealed.

APA, Harvard, Vancouver, ISO, and other styles

46

Jia, Zhi Xin, Hong Bing Wu, Ji Qiang Li, and Ming Cai Fang. "Computer Aided Price Quoting Package for Injection Mould Based on Standard Man-Hour Method." Applied Mechanics and Materials 37-38 (November 2010): 253–58. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.253.

Full text

Abstract:

Mold companies are always facing the urgent price quotation requirements for plastic parts from customers in today’s competition market. This paper analyzed the price composition based on the standard man-hour method of plastic mould. Furthermore, the calculation of manufacturing cost for injecting mold was discussed. A computer aided quotation package for small and medium mould company was developed on SolidWorks software, by which the quotation of plastic mould can be obtained quickly. The application results of a number of actual cases show that the method can satisfy the engineering requir

APA, Harvard, Vancouver, ISO, and other styles

47

Jaya Saputra, Trisma, Dwi Kurniyawan, Rizal Akbar Mantofani, and Wahyu Eko Prasetyo. "Analisis Stress, Displacement, dan Strain pada Piston dengan Variasi bahan Piston menggunakan Material Aluminium AA356.0-F, 2618-T61 (SS), 4032-T6." ETNIK: Jurnal Ekonomi dan Teknik 2, no. 9 (2023): 814–21. http://dx.doi.org/10.54543/etnik.v2i9.247.

Full text

Abstract:

The purpose of this study is to analyze the mechanical response of a piston in an engine with different piston materials. The piston materials used are Aluminium AA356.0-F, 2618-T61 (SS), and 4032-T6. The analysis is conducted using the Solidworks software, which allows for simulation and evaluation of the piston's performance under operational conditions. Stress, displacement, and strain analysis of a piston using different piston materials (Aluminium AA356.0-F, 2618-T61 (SS), 4032-T6) conducted using Solidworks. Objective: gaining insights into the relative performance of each piston materia

APA, Harvard, Vancouver, ISO, and other styles

48

Ardatov, Oleg, Algirdas Maknickas, and Rimantas Kačianauskas. "FEM MODELLING OF OSTEOPOROTIC VERTEBRA L1 DUE TO BENDING LOAD / OSTEOPOROTINIO SLANKSTELIO L1 ĮTEMPTOJO BŪVIO SKAITINIS TYRIMAS BEM ESANT LENKIMO APKROVAI." Mokslas – Lietuvos ateitis 7, no. 6 (2016): 649–52. http://dx.doi.org/10.3846/mla.2015.852.

Full text

Abstract:

The article presents modeling of human lumbar vertebra L1 and it‘s stress analysis using finite elements method. The problem of tissue degradation is raised. Using the computer aided modeling with SolidWorks software the numerical model of lumbar vertebra and intervertebral disks were created. The article contains statistics of spreading of osteoporosis, description of modeling meth-ods and the results of bending test for various types of tissue degradation. Straipsnyje yra atliekamas stuburo juosmeninės dalies slankstelio (L1) modeliavimas ir tyrimas baigtinių elementų metodu (BEM). Yra sukur

APA, Harvard, Vancouver, ISO, and other styles

49

Yevhenii, Krupa, and Roman Demchuk. "COMPREHENSIVE REVIEW OF SOLIDWORKS AND ANSYS FOR HYDRAULIC MACHINERY DESIGN AND ANALYSIS." Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units, no. 2 (March 6, 2025): 48–53. https://doi.org/10.20998/2411-3441.2024.2.07.

Full text

Abstract:

An in-depth analysis of current computer-aided design (CAD) and systems engineering analysis (CAE) software is presented, focusing on SolidWorks and ANSYS. Particular attention is paid to their use in the design and analysis of hydraulic machines, where these tools play an essential role in the development of turbines, pumps, and other components. SolidWorks stands out as the leading tool for creating 3D models of hydraulic assemblies, allowing engineers to optimize designs and reduce hydraulic losses early in the design process. In addition, SolidWorks offers a user-friendly interface and pow

APA, Harvard, Vancouver, ISO, and other styles

50

Petrescu, Stelian-Mihai-Sever, Mihaela Țuculină, Dragoș Popa, et al. "Modeling and Simulating an Orthodontic System Using Virtual Methods." Diagnostics 12, no. 5 (2022): 1296. http://dx.doi.org/10.3390/diagnostics12051296.

Full text

Abstract:

Cone beam computed tomography (CBCT) is a modern imaging technique that uses X-rays to investigate the structures of the dento-maxillary apparatus and obtain detailed images of those structures. The aim of this study was to determine a functional mathematical model able to evaluate the elastic force intensity on each bracket and tube type element and the ways in which those components act on the orthodontic system being used. To analyze a real orthodontic system, we studied the case of a 13-year-old female patient. To transfer geometric information from tomographic images, we used the InVesali

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!