Relevant bibliographies by topics / SolidWorks / Journal articles
To see the other types of publications on this topic, follow the link: SolidWorks.

Journal articles on the topic 'SolidWorks'

Author: Grafiati
Published: 4 June 2021
Last updated: 26 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'SolidWorks.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Agustiawan, Iwan, and Ardi Adhiguna Riyadhi. "Analisis Kekuatan Stabilizer Bar (Anti-Roll Bar) Pada Kendaraan Roda Empat Menggunakan Bantuan Software Solidworks." Jurnal Rekayasa Energi dan Mekanika 1, no. 2 (October 12, 2021): 77. http://dx.doi.org/10.26760/jrem.v1i2.77.

Full text
Abstract:
Abstrak Stabilizer bar berfungsi mengurangi besarnya sudut rolling, sehingga diharapkan kendaraan lebih stabil. Tujuan yang ingin dicapai dari penelitian ini adalah mengetahui kekuatan stabilizer bar akibat body roll kendaraan dengan pemodelan dan simulasi serta analisis menggunakan bantuan software solidworks. Metode yang digunakan adalah mengidentifikasi karakteristik fisik, beban, tumpuan dan material yang digunakan untuk proses pemodelan serta simulasi sederhana menggunakan software solidworks sehingga dapat memperoleh tegangan geser dan faktor keamanan. Sebagai pembanding terhadap model dan simulasi solidwork, tegangan geser maksimum yang terjadi dihitung secara manual berdasarkan momen puntir dan momen lentur yang bekerja secara simultan dalam stabilizer bar. Hasil penelitian ini menunjukkan bahwa ketika kendaraan mengalami body roll sebesar 3,51° dimana stabilizer bar terpuntir 2,62° dan mengalami tegangan geser dan faktor keamanan dari perhitungan manual, yaitu 52,47 MPa dan 9,39 untuk beban statis, 104,94 MPa dan 4,69 untuk beban dinamis. Berdasarkan analisis menggunakan software solidwork tegangan geser dan faktor keamanan, yaitu 50,05 MPa dan 8,96 untuk kondisi statis, 100,1 MPa dan 4,48 untuk kondisi dinamis. Berdasarkan prediksi menggunakan persamaan regresi linier, maka sudut body roll kritis yang dapat dicapai adalah sebesar 45,99° ketika stabilizer bar mulai mengalami deformasi plastis. Kata kunci : Stabilizer Bar, Anti-Roll Bar, Solidworks Abstract The stabilizer bar functions to reduce the amount of rolling angle, so that the vehicle is expected to be more stable. The purpose of this research is to determine the strength of the stabilizer bar due to vehicle body roll by modeling and simulation and analysis using Solidworks software. The method used is to identify the physical characteristics, loads, supports and materials used for the modeling process and simple simulations using solidworks software so as to obtain shear stress and safety factors. As a comparison to the solidwork model and simulation, the maximum shear stress that occurs is calculated manually based on the torsional moment and the bending moment that work simultaneously in the stabilizer bar. The results of this study indicate that when the vehicle experiences a body roll of 3.51 ° where the stabilizer bar is twisted 2.62 ° and experiences shear stress and safety factors from manual calculations, namely 52.47 MPa and 9.39 for static loads, 104.94 MPa and 4.69 for dynamic loads. Based on the analysis using solidwork shear stress software and safety factors, namely 50.05 MPa and 8.96 for static conditions, 100.1 MPa and 4.48 for dynamic conditions. Based on predictions using linear regression equations, the critical body roll angle that can be achieved is 45.99 ° when the stabilizer bar begins to undergo plastic deformation. Keywords : Stabilizer Bar, Anti-Roll Bar, Solidworks
APA, Harvard, Vancouver, ISO, and other styles
2

Suwantri, Suwantri. "Analisis Kerangka Mesin Hot press Plastik Berbasis Simulasi." Suara Teknik : Jurnal Ilmiah 13, no. 1 (July 9, 2022): 19. http://dx.doi.org/10.29406/stek.v13i1.3961.

Full text
Abstract:
Meningkatnya konsumsi produk dan peralatan berbahan plastik berdampak pada meningkatkan jumlah sampah plastik. Sampah plastik telah menjadi salah satu masalah lingkungan yang paling mendesak. Untuk memastikan mesin hot press yang dihasilkan dapat mencapai tujuan yang optimal maka desain mesin hot press plastik dibuat simulasi dengan menggunkan software solidworks. Penelitian ini menggunakan metode simulasi dengan bantuan perangkat lunak (software) yang membantu menganalisa karakteristik model yang dibuat. Analisa yang dilakukan adalah berupa pembebanan dan pemberian gaya pada model berupa kerangka mesin hot press plastic. Adapun geometri dan simulasi pembebanan dilakukan pada software Solidworks. Berdasarkan hasil FEA (Finite Element Analysis) seperti yang diperlihatkan pada gambar hasil simulasi software solidwork, didapatkan hasil bahwa kerangka mesin hot press plastik dengan besi hollow, baik yang menggunakan siku penyangga dan kerangka tidak menggunakan siku penyangga sama-sama kuat menahan beban untuk mesin hot press plastik. Berdasarkan hasil simulasi didapatkan data yield strength bahan adalah 234.42 N/mm2. Hasil tersebut dinyatakan aman karena perhitungan tidak melebihi Kata kunci: mesin hot press plastic, FEA, Solidworks
APA, Harvard, Vancouver, ISO, and other styles
3

Eko Aprianto Nugroho and Abdul Rahman Agung Ramadhan. "DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS." Jurnal Teknik dan Science 2, no. 2 (June 30, 2023): 16–22. http://dx.doi.org/10.56127/jts.v2i2.762.

Full text
Abstract:
Coffee is a commodity that is currently developing. However, many coffee farmers in remote areas experience problems in increasing their business along with high market demand due to a lack of business support tools. The purpose of this paper is to find out the materials used in designing a wet coffee bean peeler machine. Design the frame of a wet coffee bean peeler machine using Solidwork software. Wet coffee bean peeler analysis. The type of iron to be used in the frame of this wet coffee bean peeler is galvanized angle iron with a size of 22 x 22 x 1.8 mm. The results obtained show that the von misses stress calculated using solidworks has the greatest stress of 69,654 Mpa. For von misses stress by manual calculation, a value of 71.707Mpa is obtained. The results obtained show that the displacement calculated using solidworks has the greatest stress of 0.293 mm. For displacement with manual calculations, a value of 0.163 mm is obtained. The results obtained show that the Factor of Safety value calculated using Solidworks has the greatest stress of 2,928 ul. For the Factor of Safety with manual calculations, a value of 2,830 ul was obtained.
APA, Harvard, Vancouver, ISO, and other styles
4

Pavlov, Eugene, and Oleg Lifanov. "Pipeline design in SolidWorks." Problems of Water supply, Sewerage and Hydraulic, no. 35 (May 31, 2021): 42–47. http://dx.doi.org/10.32347/2524-0021.2021.35.42-47.

Full text
Abstract:
It is shown that is the program SolidWorks and what it is intended for, taking into account also that SolidWorks is a network standard for tree- dimensional solid state design. There are also tree basic system configurations, which are used depending on the class and complexity of the tasks. Application in practice of design of SolidWorks provides automatic reception of the license for use of technologies of tree- dimensional designing which allow to design and bring to the market modern innovative production. Respect for those that the SolidWorks program functions on the Windows platform has been transferred to the Russian language and on- demands DSTU and ESKD. The use of SolidWorks can significantly reduce labor costs when performing assembly work. The risibility of tree- dimensional design is fundamentally different from the usual project and allows workers to perform assembly work without contact consultation and ongoing control by engineering personnel. SolidWorks can be used for the design in various branches of mechanical engineering, construction, as well as for installation work on water supply and sewerage pipe systems. There tasks are solved using the SolidWorks Routing module, which is included in the configuration of the SolidWorks Premium and is specially designed to facilitate the design of prefabricated and bent pipelines, as well as flexible hoses. When designing plumbing equipment in pumping stations there is a task to complete the individual components and nodes of the project to obtain a tree- dimensional model in a complete form. The inclusion of pipeline equipment in a tree- dimensional model of a object allows solving many problems already at the design stage and avoiding situations when at the installation stage it is revealed, that the pipes are incorrectly bent and interfere with the operation of other system nodes, or there is little free space in the created structure for saying all the necessary communications. Using the SolidWorks Routing program makes it possible to optimally and compactly place water and sewer pipes indoors, prevent them from crossing and quickly get accurate data on the needs for materials and components. Indicates additional modules, which can also be used witch the SolidWorks program to facilitate the design work on the boring and bent pipelines, flexible lines and communications.
APA, Harvard, Vancouver, ISO, and other styles
5

Knyazkov, V. V., and E. M. Fazlulin. "Geometrical modeling in SolidWorks." Izvestiya MGTU MAMI 8, no. 1-5 (September 10, 2014): 170–76. http://dx.doi.org/10.17816/2074-0530-67541.

Full text
Abstract:
The article discusses the possibility of application of parametric modeling system SolidWorks for solving of geometric modeling problems in graphics disciplines. The examples illustrate various aspects of graphic works.
APA, Harvard, Vancouver, ISO, and other styles
6

Demitrova, I., and A. Nazarov. "Designing of furniture solidworks." Актуальные направления научных исследований XXI века: теория и практика 3, no. 5 (December 2, 2015): 452–55. http://dx.doi.org/10.12737/16299.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dickin, Peter. "Integrated CAM for SolidWorks." Advanced Technologies in Mechanics 2, no. 2(3) (October 30, 2015): 41. http://dx.doi.org/10.17814/atim.2015.2(3).22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lemus Solorio, Martha Angélica, and Damian Campuzano Milian. "Transformando la ingeniería con SolidWorks." Milenaria, Ciencia y arte, no. 22 (December 14, 2023): 26–29. http://dx.doi.org/10.35830/mcya.vi22.415.

Full text
Abstract:
Este artículo explora cómo SolidWorks, un software de diseño asistido por computadora (CAD), ha revolucionado la ingeniería moderna al permitir la creación de productos vanguardistas y eficientes. A través de mi experiencia personal como ingeniero mecánico en la agroindustria, destaco cómo SolidWorks ha sido un aliado esencial en el desarrollo de máquinas clasificadoras de frutas y hortalizas. Desde la concepción de proyectos hasta la producción, SolidWorks ha permitido una precisión sin precedentes, optimización de diseños y colaboración efectiva. Además, se exploran las ventajas clave de SolidWorks en la innovación del diseño, eliminación de errores y estímulo a la colaboración, transformando la manera en que creamos y construimos productos ingenieriles.
APA, Harvard, Vancouver, ISO, and other styles
9

Urdea, Mihaela. "Harmonic Gear Modeled in SolidWorks." Applied Mechanics and Materials 371 (August 2013): 453–57. http://dx.doi.org/10.4028/www.scientific.net/amm.371.453.

Full text
Abstract:
This paper deals with significant aspects connected to what the specialized literature calls CAD and it refers to modeling harmonic gears, from a modern and personal point of view. The first part presents harmonic gears in several constructive variants. This is an analysis of the characteristics of this gear, studying the most important components. The second part studies Smart Fasteners PropertyManager and how can this insert fasteners and associated hardware into assemblies. In order to illustrate SolidWorkss ability to offers part and features library or to process databases and to develop new part library a harmonic gear was modeled.
APA, Harvard, Vancouver, ISO, and other styles
10

Saibov, Maruf Farhadovich, Ulugbek Yunusovich Ochilov, and Khisrav Khurshid ugli Ashurov. "TOPOLOGICAL LEVERAGE OPTIMIZATION IN SOLIDWORKS." Theoretical & Applied Science 123, no. 07 (July 30, 2023): 69–74. http://dx.doi.org/10.15863/tas.2023.07.123.10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Sandy Suryady, Eko Aprianto Nugroho, and Abdul Muchlis. "Design Of Portable Injection Waste Destruction Machine With Sterilization System." International Journal of Science, Technology & Management 2, no. 5 (September 28, 2021): 1800–1807. http://dx.doi.org/10.46729/ijstm.v2i5.359.

Full text
Abstract:
The Community Health Center (Puskesmas) does not yet have special facilities for treating medical waste such as hospitals. Hospital/Puskesmas waste and waste generated by hospital activities and other supporting activities. Make a machine that destroys waste injection equipment equipped with a knife made of SKD as a plastic syringe destroyer. Design of a syringe crushing machine in the form of needles and syringes, Analyze the von misses stress received by the frame structure of the syringe crusher, Analyze the displacement by the load received by the frame structure of the syringe crusher, Analyze the safety factor of the frame structure of the crusher syringe. Analyzing using solidworks 2016 software, the results obtained are the maximum value of von misses, displacement, and safety of factor from the lower frame of the syringe waste crusher machine. Von misses stress obtained in the analysis using Solidworks 2016 gets a value of 48.54 Mpa in software calculations, while in theoretical calculations it is 48.01 Mpa. The percentage of errors calculated by software and theory is 1%. The displacement obtained in the analysis using Solidworks 2016 software is 0.34 mm in theoretical calculations of 0.35 mm. The percentage of errors calculated by software and theory is 2%. The safety factor obtained in the solidwork analysis gets a value of 4.7 ul (upper limit), while the theoretical calculation is 5.2 ul (upper limit) which means this frame is declared safe when the engine is operating.
APA, Harvard, Vancouver, ISO, and other styles
12

Rudyk, О. Yu, and O. V. Dykha. "SolidWorks як інноваційний засіб вивчення дисциплін автомобільного профілю." System technologies 3, no. 128 (March 16, 2020): 21–35. http://dx.doi.org/10.34185/1562-9945-3-128-2020-03.

Full text
Abstract:
Розроблена методика, яка використовує SolidWorks як засіб навчання з технічних дисциплін автомобільного профілю: твердотільне 3D проектування й моделювання вузлів і деталей автомобільної техніки та пристосувань на перших курсах навчання (SolidWorks); міцнісні, стійкісні, втомні та інші інженерні розрахунки цих вузлів і деталей – на наступних (SolidWorks-додатки).
APA, Harvard, Vancouver, ISO, and other styles
13

Рудик, Олександр, Павло Каплун, and Володимир Гончар. "ЗАСТОСУВАННЯ SOLIDWORKS ДЛЯ ПІДГОТОВКИ ВИСОКОКВАЛІФІКОВАНИХ ФАХІВЦІВ." Actual Problems in the System of Education: General Secondary Education Institution – Pre-University Training – Higher Education Institution, no. 2 (June 26, 2022): 699–706. http://dx.doi.org/10.18372/2786-5487.1.16657.

Full text
Abstract:
Розглядається застосування системи автоматизованого проектування SolidWorks та її додатку SolidWorks Simulation, призначеного для розв'язування задач механіки деформованого твердого тіла за допомогою методу скінченних елементів, для міцнісного розрахунку однієї з деталей знімача підшипників – гвинта (визначення максимальної сили, яку можна до нього прикласти).
APA, Harvard, Vancouver, ISO, and other styles
14

Cao, Kan, Peng Biao Han, Qing Hua Liu, Chao Li, and Jian Pu Geng. "The Parametric Design and FEA of SolidWorks Based on the VB." Advanced Materials Research 706-708 (June 2013): 1978–81. http://dx.doi.org/10.4028/www.scientific.net/amr.706-708.1978.

Full text
Abstract:
Parametric design is an important application of the secondary development of SolidWorks. The characteristics of parametric design and the methods and the process of the secondary development of SolidWorks are introduced. The secondary development of SolidWorks realized the parametric design and FEA for the lower support plate of bridge bearing.
APA, Harvard, Vancouver, ISO, and other styles
15

Tu, Wei Wei, Li Xiang Zhang, and Jun Sun. "Centrifugal Pump Volute Parametric Design Based on SolidWorks." Advanced Materials Research 791-793 (September 2013): 714–17. http://dx.doi.org/10.4028/www.scientific.net/amr.791-793.714.

Full text
Abstract:
SolidWorks is a powerful, easy to use, the three characteristics of scientific and technological innovation. SolidWorks also provides a powerful API interface processing mode allows the user to write according to their own conditions and needs processing hanging with the application of the software environment. SolidWorks itself can not be drawn to the curve by curve equation operation in the corresponding module can not be achieved by drawing module drawing functions of centrifugal pump volute, here we use Visual Basic 6.0 to SolidWorks secondary development, in order to achieve parametric design of centrifugal pumps.
APA, Harvard, Vancouver, ISO, and other styles
16

Parhusip, Bastian, I. Wayan Gede Suarjana, and Fikri Pomalingo. "IMPLEMENTASI PROJECT BASED LEARNING BERBASIS APLIKASI SOLIDWORKS PADA PEMBELAJARAN ONLINE MATA KULIAH GAMBAR TEKNIK." Steam Engineering 5, no. 2 (March 31, 2024): 145–51. http://dx.doi.org/10.37304/jptm.v5i2.12931.

Full text
Abstract:
The purpose of this study is to see an overview or analyze: (1) student learning activity during the pandemic through online learning using University LMS. (2) Seeing an improvement in students' drawing skills in the Machine Drawing II course using the Solidwoks application. This research was conducted using Quasi Experiment (pseudo-experiment) and qualitative descriptive methods. The Quasi Experiment design used in this study is One group Pretest-postest design. The data analysis technique in this study used the help of SPSS statistical application / software version 25 for Mac. The purpose of the data analysis technique is to see improvements in the learning outcomes of Machine Drawing II by applying the Project Based Learning model assisted by the Solidworks application. Data analysis in this study used non-parametric statistical analysis. Non-parametric statistics used in testing the mean comparison hypothesis are independent sample t-tests, with the Wilcoxon Test technique. The results of the study concluded that: (1) The implementation of Project-based Learning using Solidworks in online learning during the Covid-19 pandemic was proven to increase student activity, as evidenced by the results of observations of activeness, readiness, and raising ideas or ideas above 90% ("Very active" category). (2) The implementation of Project-based Learning using Solidworks in online learning is proven to improve students' skills/psychomotor knowledge. Based on the output table "Independent Samples Test" it can be seen that the significance value is 0.00 < ( ( 0.05) then the H1 hypothesis is accepted and it can be concluded that there is a significant difference between the average pretest and posttest learning outcomes.
APA, Harvard, Vancouver, ISO, and other styles
17

Ye, Xuan Lin. "Based on Solidworks and Mastercam Combined for Rub a Drum of Four-Axis NC Machining Programming Research." Applied Mechanics and Materials 599-601 (August 2014): 225–29. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.225.

Full text
Abstract:
Through the whole process of the design and manufacture of the product of rub a drum machine in the Solidworks and Mastercam software, the author proposes modeling parts and blanks by Solidworks software. Meanwhile fits together assembly module of parts and blanks by Solidworks, and then imports the graphic data to Mastercam software, using the basic method of NC programming by the layer from the part contour line and realizing integration technology form design to manufacturing. The combination of Solidworks and Mastercam means the practicability and innovation of application of NC machining technology. The method is simple and practical, especially for the most engineering and technical personnel to use.
APA, Harvard, Vancouver, ISO, and other styles
18

Affandi and Syifaul Huzni. "Analisis Numerik Kekuatan Puntir Baja Karbon Rendah Menggunakan Software (Solidworks)." R.E.M. (Rekayasa Energi Manufaktur) Jurnal 6, no. 2 (December 29, 2021): 29–36. http://dx.doi.org/10.21070/r.e.m.v6i2.1628.

Full text
Abstract:
Salah satu komponen yaitu poros yang dikenai puntiran akan mengalami deformasi puntir. Semakin besar deformasi puntir menunjukkan kemampuan dari komponen mesin rendah, begitu sebaliknya. Permasalahan yang sering terjadi pada saat dilakukannya pengujian puntir adalah pengolahan data menjadi kurva tegangan-renggangan geser membutuhkan usaha yang tidak sedikit. Jika spesimen yang di gunakan adalah batang padat, maka akan timbul gradient tegangan yang cukup curam sepanjang penampang lintang spesimen sehingga mempersulit pengukuran. Objektif dari penelitian ini yaitu untuk mengetahui dan menganalisa pengujian kekuatan puntir pada baja karbon rendah dengan metode numerik menggunakan sofeware solidworks. Specimen uji puntir adalah baja karbon rendah dengan standart ASTM E-143. Metode penelitian ini diawali dengan studi literatur, menguji komposisi spesimen uji, membuat dan melakukan pemodelan spesimen uji puntir. Setelah itu dilakukan pengujian puntir yang selanjutnya dilakukan pengujian simulasi statik. Kemudian melakukan analisis kekuatan puntir dengan metode elemen hingga menggunakan software (solidworks). Berdasarkan hasil pembuatan geometri dan pemodelan spesimen uji puntir dengan standart ASTM E-143, bahwa distribusi tegangan yang terjadi pada permukaan area sudut spesimen memiliki nilai yang tidak terlalu signifikan berkisar 2.879e+09 N/m2 dan 2.973e+09 N/m2. Namun perlu dilakukan simulasi uji puntir software solidworkss dengan ukuran mesh yang bervariasi serta spesimen uji puntir dengan standart ASTM yang berbeda.
APA, Harvard, Vancouver, ISO, and other styles
19

Zhang, Xin Qun. "A Parametric Die-Base in SolidWorks." Advanced Materials Research 201-203 (February 2011): 93–98. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.93.

Full text
Abstract:
The study of parametric die-base developed on SolidWorks is presented in this paper. Here Visual Basic 6.0 is selected as the development tool, and the handle of a die is taken as an example to describe the design process with dimension driving. Users may create a series of standard-parts automatically by inputting different parameters through the application interface developed with VB.
APA, Harvard, Vancouver, ISO, and other styles
20

Malik, Maciej, Magdalena Przytocka, and Michał Karpiuk. "Model based definition in SOLIDWORKS®." Mechanik 92, no. 1 (January 14, 2019): 67–69. http://dx.doi.org/10.17814/mechanik.2019.1.15.

Full text
Abstract:
Need of exchanging details about designed structure among cooperating manufacturers and integration of various IT systems, forced CAx programs developers to change the attitude to a technical documentation. The method of notation reference MBD (Model Based Documentation) data and its implementation in SOLIDWORKS® MBD are described.
APA, Harvard, Vancouver, ISO, and other styles
21

Reitz, Wayne. "A Review of: “SolidWorks for Dummies”." Materials and Manufacturing Processes 22, no. 1 (January 2007): 135. http://dx.doi.org/10.1080/10426910601026144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Mitin, E. V., S. P. Suldin, A. Yu Ovchinnikov, and N. Yu Knyazeva. "Stirrup Design Using SolidWorks Simulation Tools." Russian Engineering Research 43, no. 8 (August 2023): 934–38. http://dx.doi.org/10.3103/s1068798x2308018x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Han, Peng Biao, Kan Cao, Jun Li, Qing Hua Liu, and Xian Ju Meng. "The CAD/CAE System for Pot Rubber Bearing Based on VB." Advanced Materials Research 753-755 (August 2013): 1241–45. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1241.

Full text
Abstract:
The current design method of the pot rubber bearing and the existing problems have been analysised.It was ensured that dimension driving method was applied in the SolidWorks modeling driven by Visual Basic. The pre-processing of FEA on the upper bearing plate based on SolidWorks Simulation was ensured, and took the part as an example to show how to use Visual Basic to drive SolidWorks Simulation to realize FEA.
APA, Harvard, Vancouver, ISO, and other styles
24

Panchenko, O. "Integrated approach to analyzing the stress-strain state of the tubbing erector manipulator mechanism based on the SolidWorks program." Collection of Research Papers of the National Mining University 74 (September 2023): 230–40. http://dx.doi.org/10.33271/crpnmu/74.230.

Full text
Abstract:
Purpose. The research purpose is todevelop and substantiate a method for computer analysis of the stress-strain state that occurs in the tubbing erector manipulator mechanism with several degrees of freedom, using modern computing complexes based on the finite-element method. Methods. The research uses software complexes, with the help of which a calculation-theoretical apparatus has been created, which is intended for calculating dynamic and static loads that occur in the elements of the tubbing erector manipulator mechanism. The results of modeling the stress-strain state in the parts and nodes of this mechanism, obtained using the SolidWorks Motion and SolidWorks Simulation programs, have been compared. The errors in these results have been estimated. Findings. The effectiveness of the proposed analysis method, based on the combination of SolidWorks applications, in particular, SolidWorks Motion and SolidWorks Simulation, has been proven on the example of modeling the most complex design of the UT62 tubbing erector mechanism.The essence of the method is that initially, using the SolidWorks Motion application, the laws of motion of the motors are set. The tubbing erecting process itself is divided into discrete moments of time with the selection of parts in which the stress fields are calculated and with the determination of the maximum equivalent stress, using the Simulation Setup tool. The change in these stresses during the erecting cycle is analyzed, and if it is necessary to refine the data, the discrete time step of the mechanism motion is reduced. Specific information about the stress-strain state of the part is obtained in the SolidWorks Simulation application, using data imported from the SolidWorks Motion program about gravitational and inertial forces that occur in the tubbing erector mechanism. Originality. The scientific novelty of the developed method of computer analysis for the mechanism of the manipulator of the UT62 type tubing stacker is manifested in a comprehensive approach to modeling the stress-strain state, which includes the integration of data from SolidWorks Motion and SolidWorks Simulation programs for accurate determination of stresses, taking into account both gravitational forces and dynamic loads, which ensures high accuracy and complexity of calculations in real operating conditions of the mechanism. Practical implications. The proposed method can be used for modeling the motion of mechanisms of different complexity, in particular, in the design of domestic tubbing erectors.
APA, Harvard, Vancouver, ISO, and other styles
25

Wang, Jiang Ping, Qi Shang, and Ze Fu Bao. "Assembly and Motion Simulation of Turntable of Drilling Rig Based on SolidWorks." Key Engineering Materials 474-476 (April 2011): 2253–57. http://dx.doi.org/10.4028/www.scientific.net/kem.474-476.2253.

Full text
Abstract:
Three-dimensional solid model of a turntable of a drilling rig is built utilizing the modeling functions of an engineering software SolidWorks. The virtual assembly for every components of the turntable is accomplished with the given assembly sequence in SolidWorks environment. The motion simulation and animation of simulation processes for the turntable under given conditions are carried out with module SOSMOSMotion of SolidWorks, and the dynamic interference check is also completed, so as to guarantee the correctness of the part design and improve the overall design efficiency, accuracy and intuitiveness. The study of assembly and motion simulation of the turntable based on SolidWorks can lay the foundation for communication and evaluation of design process as well as the manufacturing of the overall drilling rig.
APA, Harvard, Vancouver, ISO, and other styles
26

Bakalova, Maria Ivanova. "Application of SolidWorks Plastic in the Training in Mechanical Engineering." ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA 1, no. 1 (December 28, 2017): 85–96. http://dx.doi.org/10.29114/ajtuv.vol1.iss1.37.

Full text
Abstract:
Abstract. In this article is presented an example of the application of SolidWorks the training in mechanical engineering. The main features of the design of the parts intended for injection molding are mentioned. SolidWorks allows all these recommendations to be implemented when creating the details. The text explains the simulation settings that are made in SolidWorks Plastics when simulating injection molding. Through a specific example referred to how to make an analysis of the results obtained.
APA, Harvard, Vancouver, ISO, and other styles
27

Tan, Chung-Ming, and Mau-Yiu Chang. "Finite Element Analysis of Cylindrical Rubber Fender." MATEC Web of Conferences 207 (2018): 02008. http://dx.doi.org/10.1051/matecconf/201820702008.

Full text
Abstract:
This research is to develop a methodology to optimize the performance of fenders using finite element analysis. The design of fender geometry is done using software SolidWorks. Simulation is one of several add-in tools in SolidWorks. The finite element analysis of the performance of the fender designed is then evaluated by simulation tool in SolidWorks. This study also shows the potential applications of computer aided engineering and its benefits in verifying and reinventing various fenders design.
APA, Harvard, Vancouver, ISO, and other styles
28

Panchenko, O. "Substantiating a method for computer analysis of the stress-strain state of the tubbing erector manipulator mechanism." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 4 (August 2023): 62–67. http://dx.doi.org/10.33271/nvngu/2023-4/062.

Full text
Abstract:
Purpose. To develop and substantiate a method for computer analysis of the stress-strain state that occurs in the tubbing erector manipulator mechanism with several degrees of freedom, using modern computing complexes based on the finite-element method. Methodology. The research uses software complexes, with the help of which a calculation-theoretical apparatus has been created, which is intended for calculating dynamic and static loads that occur in the elements of the tubbing erector manipulator mechanism. The results of modeling the stress-strain state in the parts and nodes of this mechanism, obtained using the SolidWorks Motion and SolidWorks Simulation programs, have been compared. The errors in these results have been estimated. Findings. The effectiveness of the proposed analysis method, based on the combination of SolidWorks applications, in particular, SolidWorks Motion and SolidWorks Simulation, has been proven on the example of modeling the most complex design of the UT62 tubbing erector mechanism. Originality. For the first time, a method for computer analysis of the stress-strain state that occurs in the tubbing erector manipulator mechanism of the UT62 type has been developed and substantiated. The essence of the method is that initially, using the SolidWorks Motion application, the laws of motion of the motors are set. The tubbing erecting process itself is divided into discrete moments of time with the selection of parts in which the stress fields are calculated and with the determination of the maximum equivalent stress, using the Simulation Setup tool. The change in these stresses during the erecting cycle is analyzed, and if it is necessary to refine the data, the discrete time step of the mechanism motion is reduced. Specific information about the stress-strain state of the part is obtained in the SolidWorks Simulation application, using data imported from the SolidWorks Motion program about gravitational and inertial forces that occur in the tubbing erector mechanism. Practical value. The proposed method can be used for modeling the motion of mechanisms of different complexity, in particular, in the design of domestic tubbing erectors.
APA, Harvard, Vancouver, ISO, and other styles
29

Roman, Vitalii, Fedir Matiko, and Igor Kostyk. "Investigation of Turbulence Parameters Influence on Results of CFD Modeling of Flow in Ultrasonic Flowmeter." Energy Engineering and Control Systems 7, no. 1 (2021): 73–78. http://dx.doi.org/10.23939/jeecs2021.01.073.

Full text
Abstract:
The article investigated the influence of turbulence parameters of the SolidWorks Flow Simulations CFD package on the results of flow simulation in a two-path ultrasonic flowmeter. It has been found that the main turbulence parameters of SolidWorks Flow Simulations (turbulence intensity, turbulence length, turbulence energy and turbulence dissipation) slightly affect the result of the flow simulation in a full-filled pipeline of circular profile without additional turbulous elements (turbine, rotor, other). In view of this, during the CFD modeling of the flow measurement process using ultrasonic flowmeters, it is recommended to apply turbulence parameters installed in the SolidWorks Flow Simulations CFD package by default. At the same time, the time consumed by the computer to perform CFD modeling is almost unchanged when the specified parameters of the SolidWorks Flow Simulations CFD package.
APA, Harvard, Vancouver, ISO, and other styles
30

Kumar, B. Phanindra. "MODELLING AND 3D PRINTING OF 2-WHEELER CARBURETOR." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (April 25, 2024): 1–5. http://dx.doi.org/10.55041/ijsrem31672.

Full text
Abstract:
Carburetor is a most important component in fuel feed system of spark ignition engines. A carburetor is a device used by a gasoline internal combustion engine to control and mix air and fuel entering the engine. The main structure and largest component of the carburetor is the molded body made from a lightweight alloy or aluminum. This carburetor model is made in a modelling software i.e., SolidWorks and this review examines the use of SolidWorks software for modelling two-wheeler carburetors, exploring its benefits for creating accurate 3D models, simulations, and design communication. It analyzes existing research on modelling various carburetor components and functionalities in SolidWorks, considering factors like detail, design intent, and manufacturability. This study is made for the best 3D model of the carburetor. Keywords: Carburetor, spark ignition engines, SolidWorks, 3D models, modelling.
APA, Harvard, Vancouver, ISO, and other styles
31

Karim, Mohamad Iqhmannabil, Azrul Azim Abdullah Hashim, and Nor Maniha Abdul Ghani. "Control of Double Link Flexible Robotic Manipulator System." Journal Européen des Systèmes Automatisés 55, no. 6 (December 31, 2022): 759–63. http://dx.doi.org/10.18280/jesa.550607.

Full text
Abstract:
Flexible manipulator is widely used in the implementation of industial robotic due to its advantages such as low weight, low power consumption, higher load capacity, high-speed operation, small actuators and low production costs. However, the position and speed of flexible manipulator system are very difficult to control due to the tip vibration that result in degradation of performance. Modelling and control of a double-link flexible robot manipulator are presented in this study. Controlling the movement of a double-link manipulator, on the other hand, has proven to be a challenging task, especially when a flexible framework is used. Moreover, most double-link flexible manipulator system models are not developed based on real hardware. Hence, this project aims to develop a Solidworks design for double link flexible robotics manipulator (DLFRM) as well as a real hardware prototype. The control position performance of DLFRM was analyzed, and the controllers were tested on a hardware prototype. This project started with a simulation of both controllers, which are PID and FLC. The simulation was designed in Solidworks and exported to Simulink and then converted as Simscape. Then, the hardware for each controller was validated using the control parameter in the simulation. The joints for the robot manipulator were designed in Solidwork and built using 3D printing.
APA, Harvard, Vancouver, ISO, and other styles
32

Qiu, Xiao Li, and Gang Sun. "The Approachment for Developing a CAD System for Cam Mechanisms of ATC." Applied Mechanics and Materials 590 (June 2014): 591–95. http://dx.doi.org/10.4028/www.scientific.net/amm.590.591.

Full text
Abstract:
The motion cycle chart of cam mechanisms of ATC was designed, the contour surface equation of globoidal indexing cam and the roller center trajectory equation of plane groove cam were established. Based on the idea of modular design and the SolidWorks, a CAD system of cam mechanisms of ATC was developed by using SolidWorks API and VC++ 6.0. Then the assembly model was built under the circumstance of SolidWorks directly. Meanwhile, the movement of cam mechanisms was simulated so that the reasonableness of the design was verified.
APA, Harvard, Vancouver, ISO, and other styles
33

Tarandushka, Lyudmyla, and Alla Yovchenko. "Parametric Design of 3D Models of crank Mechanism of a Car with CAD Solidworks." Central Ukrainian Scientific Bulletin. Technical Sciences 2, no. 5(36) (2022): 195–201. http://dx.doi.org/10.32515/2664-262x.2022.5(36).2.195-201.

Full text
Abstract:
The main possibilities of SolidWorks CAD for parameterization of complex mechanisms on the example of crank mechanism (CM), including operations of forming volumes, methods of working with sketches, technologies of forming assembly units using coupling tools are investigated. The use of parameterization will increase the efficiency of development and design of standard mechanisms and parts. At the same time the parametrized assembly design of CM in SolidWorks CAD is formed, which allows to quickly reconstruct CM details, to carry out calculation of the given details on durability with the SolidWorks Simulation module connected. As a result of the analysis the main possibilities of SolidWorks CAD for parameterization of complex mechanisms on the example of CM parameterization are considered. When designing parametric models of CM elements and forming the assembly structure of the CM node, the methods of working with sketches, operations of forming volumes, technologies of forming assembly units with the use of conjugation tools are considered. As a result, a parameterized assembly of the CM in the SolidWorks system is formed, which allows not only to quickly rebuild the parts of the CM, but also to calculate the strength of these parts with the SolidWorks Simulation module connected using the finite element method. That is, with the use of parametric models significantly reduces the cost of product design, reduces computing resources, time ratio simulation - prototyping by automating the calculation process and building a 3D model.
APA, Harvard, Vancouver, ISO, and other styles
34

Wang, Zhan Li, Yan Juan Hu, Yan Wei Chen, and Hua Chao Guo. "Design and Co-Simulation Analysis of Flip Climbing Transmission System for Stair-Climbing Wheelchair." Key Engineering Materials 621 (August 2014): 372–77. http://dx.doi.org/10.4028/www.scientific.net/kem.621.372.

Full text
Abstract:
: In this paper, I designed a differential planetary gear for flip climbing transmission system which was applied to the star-climbing wheelchair. According to space limitation and the stair climbing per formance requirements, distributing the number of teeth for each gear under transmission ratio requirements. Furthermore, modifying tooth profile parameters on each gear for improving the quality of the transmission. Using SolidWorks software established t he three-dimensional model. Then impact and contact simulated analysis is studied based on the SolidWorks Motion Plugins to get transmission and meshing condition. At the same time, gave the SolidWorks Motion output data as a result of the input data to t h e SolidWorks Simulation. Through the simulation results validate the output center gear tooth can meet the carrying capacity requirements. On the other hand, it also provides theoretical basis for further improve the structure design.
APA, Harvard, Vancouver, ISO, and other styles
35

Ragan, Joseph, and Dan B. Marghitu. "Impact of a Kinematic Link with MATLAB and SolidWorks." Applied Mechanics and Materials 430 (September 2013): 170–77. http://dx.doi.org/10.4028/www.scientific.net/amm.430.170.

Full text
Abstract:
The elastic impact of a free kinematic link with a surface is studied using MATLAB and SolidWorks. The differential equations of motion are developed using an elastic nonlinear contact force and a frictional force. The nonlinear equations of motion are written in an external m-file and are solved using numerical techniques. The results are checked using a simulation in SolidWorks. For the SolidWorks simulation a specific force is defined for the the elastic impact. The numerical results are obtained with the two methods are compared. The vertical elastic displacement during impact has lower values less for the frictional case.
APA, Harvard, Vancouver, ISO, and other styles
36

Yan, Xiang Tong. "Parameterized Modeling of Parts Based on SolidWorks." Advanced Materials Research 346 (September 2011): 394–97. http://dx.doi.org/10.4028/www.scientific.net/amr.346.394.

Full text
Abstract:
According to the analysis of CAD technology and Solid Works software, the design idea and methodology of 3D modeling and parameterized design are put forward based on Solid Works, and the example of shearer drum model is used to introduce the modeling process in detail. The method will shorten the design time，increase the quality of design and provide useful help to quickly design of mechanical product.
APA, Harvard, Vancouver, ISO, and other styles
37

Liu, Qihong, Zhenhua Li, and Caixia Li. "Design of Roller Seeder Based on Solidworks." Journal of Physics: Conference Series 1952, no. 3 (June 1, 2021): 032033. http://dx.doi.org/10.1088/1742-6596/1952/3/032033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Kalyakulin, S. Yu, A. P. Martyshkin, E. V. Mitin, and S. P. Sul’din. "Design of Roller Beams Using SolidWorks Software." Russian Engineering Research 41, no. 12 (December 2021): 1239–41. http://dx.doi.org/10.3103/s1068798x21120212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Zhang, Rong, Wen Ping Wang, Zhi Qiang Shi, Jun Hu, Peng Fei Xu, Xing Wu, and Hui Li. "Fire Rescue Robot Design Based on Solidworks." Advanced Materials Research 940 (June 2014): 254–57. http://dx.doi.org/10.4028/www.scientific.net/amr.940.254.

Full text
Abstract:
This paper introduces the fire rescue the robot's stability of the mechanical design and theory research. Through the Solidworks 3d software simulation model is established, and summarizes the analysis of its mechanical structure reliability and the stability of the overall performance, help to promote the equipment used in our country in the process of fire rescue..
APA, Harvard, Vancouver, ISO, and other styles
40

Li, Chang Ping, Jian Hua Rao, and Jun Lin Hu. "SolidWorks Secondary Development System of DTH Bits." Advanced Materials Research 753-755 (August 2013): 1065–68. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1065.

Full text
Abstract:
DTH (Down-the-hole) Bits are widely used in engineering construction and mining but the design level of DTH Bits needs improving. The kinds of DTH Bits are various in the practical application. Meanwhile, design efficiency is low and management in design information of historical product is insufficient. To solve the problems, key features of the DTH Bits used in different strata are analyzed and SolidWorks secondary development system of DTH Bits is developed with VB.NET. The secondary development system runs in the same process with SolidWorks in the form of a plug-in. ADO technique is used to connect the system and database which stores design information of historical product. It proves that the secondary development system can improve design and management efficiency of DTH Bits.
APA, Harvard, Vancouver, ISO, and other styles
41

Zainudin, M. R., A. Yahya, M. I. M. Fazli, A. Syahrom, F. K. C. Harun, and M. S. Nazarudin. "Design of biped hip simulator using SolidWorks." Journal of Physics: Conference Series 908 (October 2017): 012060. http://dx.doi.org/10.1088/1742-6596/908/1/012060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Dragne, Ciprian, Corina Radu Frenţ, and Mihaiela Iliescu. "MECHANICAL ENGINEERING OF ROBOTIC SYSTEMS BY SOLIDWORKS." International Journal of Modern Manufacturing Technologies 14, no. 2 (December 20, 2022): 61–68. http://dx.doi.org/10.54684/ijmmt.2022.14.2.61.

Full text
Abstract:
"The modern design studies involve many aspects of product development starting from the concept-zero, continuing with the evaluation and optimization of the structure designed according to many criteria (kinematics, dynamics, strength of materials of mechatronic systems) and ending with specifications for prototype execution. This article evidences design methodologies used in engineering practice in all the design phases, assisted by the professional CAD program, Solidworks. CAD performances of professional software, by modelling and simulation, contribute to a better evaluation of the research results and to the integration of design into manufacturing phases. These aim to reduce the time from product concept up to it is launched in the market. In the case of robots and complex mechatronic systems, special attention is focused on the mechanical components concept and design so that they enable required motions – trajectory, speed, acceleration. Results of kinematic analysis for two new robotic systems obtained by modelling and simulation using SolidWorks software are presented. There were considered specific phases that are: fully study of requirements; set constraints; concept; 3D CAD model; kinematic analysis; simulation; interpretation of results and conclusion. Finally, relevant benefits of the research for the real case studied are enhanced. By using professional software for evaluations, it is efficient to make video presentations at an outstanding level which summarizes the evaluation of the studied phenomena and enlightens the research results. "
APA, Harvard, Vancouver, ISO, and other styles
43

Cetina López, Wendy Argentina de Jesús, Elsy Verónica Martín Calderón, and Marlene Méndez Moreno. "Solidworks: una alternativa para la industrialización regional." Multidisciplinas de la Ingeniería 4, no. 04 (December 13, 2023): 271–74. http://dx.doi.org/10.29105/mdi.v4i04.173.

Full text
Abstract:
En el contexto económico de la zona de Camino Real de Campeche y del Sur de Estado de Yucatán se observa una importante tercialización de la economía, la cual se demuestra con las actividades económicas que predominan en la zona. Sin embargo, en la búsqueda del desarrollo económico, social y tecnológico se han creado instituciones del nivel superior descentralizadas con el propósito de profesionalizar las actividades que se realizan en la región, para así generar una nueva dinámica económica que mejore la calidad de vida de los habitantes del sureste de México. De manera puntual en el Instituto Tecnológico Superior del Sur del Estado de Yucatán (ITSSY) e Instituto Tecnológico Superior de Calkiní en el Estado de Campeche (ITESCAM) comparten esta visión con la impartición del Programa Educativo (PE) de ingeniería industrial, misma que tienen el potencial de generar el desarrollo tecnológico de productos, servicios y procesos. Este impulso regional puede ser mejorado con la implementación de las herramientas del diseño asistido por computadora (Solidworks), que representa una alternativa para la innovación de productos y procesos.
APA, Harvard, Vancouver, ISO, and other styles
44

KUSHNIRCHUK, ANDRIY, VITALII TKACHUK, VITALII KARAZEY, VIACHESLAV KHARZHEVSKYI, and MAKSYM MARCHENKO. "USING SOLIDWORKS FOR PROTOTYPING AERODYNAMIC STEERING DRIVES." Herald of Khmelnytskyi National University. Technical sciences 323, no. 4 (August 31, 2023): 361–64. http://dx.doi.org/10.31891/2307-5732-2023-323-4-361-364.

Full text
Abstract:
The work discusses the effective use of the Solidworks software for modeling complex mechanisms with moving elements of intricate shapes. The application of the program by designers in enterprises significantly increases the efficiency of the work of design bureaus and research and experimental departments. Development time is greatly reduced, and many analysis tools allow for the avoidance of errors. The use of Solidworks for creating 3D models, along with additive technologies for manufacturing these models, takes the creation of prototypes of complex steering drives to a qualitatively different level. To model such complex-shaped parts as ailerons, the Solidworks tool, “Section hood” was used, such a tool greatly simplifies modeling and allows you to achieve the desired shape of the model. The engine models were used in the Solidworks assembly and combined with the mating conditions with other components, this allowed to adjust the design “in the context of the assembly” to the actual dimensions of the engines. To analyze the correct movements of the drive elements, “mechanical couplings” with real gear ratios were installed on all gears. In this way, it was possible to fully analyze the movement of all drive elements, to determine their position during movement After the modeling and analysis process was completed, the prototype manufacturing process began, for which the FDM printing technology was chosen as the fastest, cheapest, but capable of reproducing complex shape details. CoPET plastic is chosen as the main material for printing, bearings are used for smooth rotation of drive elements, all axes of mechanisms are made of metal with the help of mechanical processing.The manufactured prototype turned out to be working, all movements are performed as intended in the modeling process, you can perform experiments and research with the obtained product to obtain the necessary results. The Solidworks software product allowed not only to fully simulate the steering drive, but also to avoid many errors thanks to the available analysis tools. The FDM printing technology made it possible to quickly create a prototype, provide all the intended functionality, the quality of the parts allows the drive to work correctly.
APA, Harvard, Vancouver, ISO, and other styles
45

Wang, Jun, Xin Yuan Huang, and Sheng Ju Sang. "Using Multiple Methods for Rapid Programming in SolidWorks." Applied Mechanics and Materials 48-49 (February 2011): 1337–40. http://dx.doi.org/10.4028/www.scientific.net/amm.48-49.1337.

Full text
Abstract:
A study on integrate multiple methods including design table, equations, shared data link and API programming design tools in SolidWorks is presented. This method needs to establish the source model only once for congeneric parts and very efficiently avoided establishing model for each part respectively. It greatly reduced the storage space of parts library and effectively enhanced the development efficiency gave full play to the powerful interactive and internal computability in SolidWorks.
APA, Harvard, Vancouver, ISO, and other styles
46

Guo, Rong Chun, and Jin Zhou. "Design of Loader Working Device Based on SolidWorks." Applied Mechanics and Materials 80-81 (July 2011): 1006–9. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.1006.

Full text
Abstract:
In this paper, the basic theory of Virtual Design was described and the application of 3D design software SolidWorks 2009 in loader working device was introduced as well. In SolidWorks 2009, Loader working device was taken for example to discuss the process of parametric modeling. Meanwhile, it could be approved from the virtual assembly process of working device that the whole process was fully in line with the assembly process in actual production.
APA, Harvard, Vancouver, ISO, and other styles
47

Lai, Hui Fen, and Wu Zheng Xiao. "The Structural Design and Check up Strength on Underwater Propulsion Manipulator." Advanced Materials Research 538-541 (June 2012): 2937–40. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.2937.

Full text
Abstract:
This document explains and demonstrates how to design the structure and analysis its strength for the underwater propulsion manipulator. Through comparison, the structural design program of the manipulator is determined, With the solidworks software, its strength is checked up, and the forces are analyzed by the dynamic simulation solidworks.
APA, Harvard, Vancouver, ISO, and other styles
48

Mao, Peng Jun, Fu Zhang, and Guo Ying Zhang. "Data Exchange Method between ADAMS, CATIA and Solid Works Software." Applied Mechanics and Materials 143-144 (December 2011): 422–27. http://dx.doi.org/10.4028/www.scientific.net/amm.143-144.422.

Full text
Abstract:
Three kinds of data transmission standards of IGES, parasolid and STEP on the SolidWorks and ADAMS software were contrasted to get the Parasolid for the most suitable software standards. CATIA 3D software has powerful function of modeling, but ADAMS has poor function of modeling. It has built the four feet completion institutions of 3D modeling by CATIA, then through among the middle media of SolidWorks software format to conversion and import CATIA 3D entity modeling into ADAMS/View environment to make up for the problem of insufficient ADAMS modeling ability. This paper focused on the discussion of data exchange process among ADAMS, CATIA and SolidWorks software.
APA, Harvard, Vancouver, ISO, and other styles
49

Qiu, Shi Yin, Hai Tao Wu, and Hong Bin Liu. "Design and Simulation of Pastry Slicer Based on SolidWorks and ADAMS." Advanced Materials Research 328-330 (September 2011): 151–54. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.151.

Full text
Abstract:
A new type of pastry slicer which could alter pastry thickness expediently was designed by using SolidWorks and ADAMS. In the first place, the pastry slicer 3D model was established by SolidWorks and imported into ADAMS by the nicer interface between SolidWorks and ADAMS. In the second place, the pastry slicer 3D model was simulated in ADAMS. The dynamics simulation result showed that the pastry slicer could fulfil the anticipative design requirements. The simulation analysis results could be regard as the design reference for the new type of pastry slicer, and the virtual prototype could be used to do a deeper analysis according to different requirements.
APA, Harvard, Vancouver, ISO, and other styles
50

Hindroyuwono, Rinto, Rachmat Anggi Marvianto, Eliev Fajar Almaida, and Yunus Bakhtiar Arafat. "Static Loading Simulation on Temporary Platform and Ladder Absorbent Chamber Design." International Journal of Engineering Continuity 3, no. 1 (June 16, 2024): 118–25. http://dx.doi.org/10.58291/ijec.v3i1.247.

Full text
Abstract:
This study utilizes SolidWorks software to thoroughly examine the structural layout and static load simulation of a temporary platform and ladder in an adsorbent chamber. SolidWorks, a computer-aided design (CAD) and computer-aided engineering (CAE) software, offers robust tools for 3D modeling, simulation, and analysis, making it ideal for this type of structural assessment. Finite element analysis (FEA), a simulation model within SolidWorks, is employed to determine stress distribution and safety factors. The results demonstrate the platform's maximum stress at 198.65 MPa, below the yield strength of ASTM A36 Steel, leading to a safety factor of 1.3. These findings validate the design's safety and reliability for industrial use.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'SolidWorks' for other source types:
Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography