Relevant bibliographies by topics / Soustava zásobování teplem

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Soustava zásobování teplem'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Soustava zásobování teplem.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Soustava zásobování teplem"

1

Kozel, David. "Zhodnocení napojení JEDU na horkovodní síť města Brna." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229279.

Full text
Abstract:
In this thesis, I was solved assessment of nuclear power plant Dukovany, conection to the hot water network to city Brno. For determine the size needful enforcement was necessary to establish the heat balance of needs of the city of Brno and the size of the heat supply options. After that it was possible to determine the dimensions of pipes and optimize his routes of due to the current state of land along the route of thermal power supply. Power supply parameters were chosen with regard to the possibilities of technology used for transmission of the media and the status quo for distribution of the city Brno. After pushing the power supply ahead of the city Brno into the pumping station Bosonohy, and second part of the solution was the connection to the backbone wiring SCZT heat to individual customers. The last point was elaborated design management system of heat from nuclear power plant and urban local based resources on current management of heat supply system using consumption diagrams SCZT.
APA, Harvard, Vancouver, ISO, and other styles
2

Krňávek, Martin. "Regionální energetické využití odpadů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231798.

Full text
Abstract:
The master’s thesis deals with technologies for energy utilisation of waste with annual treatment capacity approximately from 10 to 50 kt/year and their application in regions of the Czech Republic. In the first part of the thesis the results of heat consumption analysis in seven regions of the CR are introduced while in two selected regions a production of waste was analyzed too. The main part deals with the design of technological solution of waste-to-energy plant with medium capacity and its integration to specific conditions of the two selected regions. Alternatives of combined heat supply were assessed from waste-to-energy plant as well. A basic economic analysis that contains the estimates of incomes and capital expenditures and operating expense is a part of this thesis too.
APA, Harvard, Vancouver, ISO, and other styles
3

Aranguren, Campos Fabian Alexis. "Využití odpadního tepla kompresorů do soustavy centrálního zásobování teplem pomocí absorpčního tepelného čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-433480.

Full text
Abstract:
With the growth of energy consumption and the optimization of industrial processes worldwide, new energy sources have been explored and investigated. Waste heat is a potential source for the generation of electricity and heat. This heat can be reused at different stages of industrial processes by using absorption heat pumps, which transfer thermal energy from a location with a lower thermal potential to a location with a higher thermal potential. This research work is basically focused on the evaluation of different absorption heat pumps implemented in the SAKO Brno incineration plant. To carry out this purpose, a bibliographic review of this technology has been carried out worldwide, then the mass and energy balance in the compressor is presented, from which the waste heat to be recovered with the pump will be obtained. Using the EES software, the mass and energy balance of the selected pumps is performed, then the amount of heat and electrical energy generated by the plant when implementing each of the pumps is shown, and finally the economic analysis is presented The design and implementation of a heat exchanger in the system is also included as an essential part of improving operation. The best option arises from the highest operational efficiency at the lowest possible cost.
APA, Harvard, Vancouver, ISO, and other styles
4

Malach, Tomáš. "Teplárenské sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371944.

Full text
Abstract:
In the first part of master thesis is presented general introduction to district heating system (DHS) and hydraulic calculation for DHS. The next part deals with analysis operation of DHS and the pressure diagram for certain time interval. Subsequently, the thermohydraulic characteristics for the hydraulic main branch (comparing manual calculation with software calculation) and also the selected thermal and hydraulic characteristics for the whole DHS are shown. The last part is focused on the determination of the amount of heat supplied based on the ultrasonic flowmeter and the temperature probes. Subsequently, the computer simulation is also carried out, aiming at approximating the real heat supply from heat source to solved thermal network in winter.
APA, Harvard, Vancouver, ISO, and other styles
5

Svobodová, Veronika. "Návrh tepelného zdroje lokální soustavy CZT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401565.

Full text
Abstract:
The diploma thesis is focused on district heat supply, heat sources, machinery and safety equipment of boiler rooms. The main goal of the thesis is to modernize parts of the heat sources with the respective boiler room equipment in accordance with the latest available technology. The generated thermal energy is used for heating or hot water production for residential and non-residential buildings in the vicinity of the boiler room. In the theoretical part, the thesis focuses in more detail on boiler rooms, specifically on heat energy sources, machinery and safety equipment of boiler rooms, system ventilation and combustion exhaust. The findings are applied in the design of the new boiler room layout. It is followed by a detailed description of the current state of the boiler room and heat networks. An essential part of the work is the assessment of layout of the current heat sources and the creation of a new design for the replacement of insufficient sources and related equipment. The last goal is an economic overview of the designed project solution.
APA, Harvard, Vancouver, ISO, and other styles
6

Ženožička, Filip. "Teplonosné látky tepelných soustav." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372275.

Full text
Abstract:
The subject of this diploma thesis is the design of heating and hot water in the administrative building in Zlin on Jižní Svahy. The building has five floors above ground and one underground floor. There are designed two variants of heat source for heating and hot water (transfer sta-tions and gas boiler). Part A solves water quality in heating systems. Part B deals with design of the heating system, hot water heating, insurance and facility expansion, technical report and drawings heating in the building. The last part C is the experimental measurement of the quality of heating water in the CZT systems.
APA, Harvard, Vancouver, ISO, and other styles
7

Brabec, Vít. "Parní turbina jako točivá redukce." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229826.

Full text
Abstract:
The dissertation analyses a possibility to install a steam turbine for steam reduction in the heating plant with a combined cycle, Červený Mlýn. In the first part of this work the constituent parts of Červený Mlýn plant are briefly described. Basic information is included about two considered solutions to the steam turbine for steam reduction. Then the thermic diagram of the whole heating plant and the heat exchanger station itself is presented. On the basis of the given values of the heat required in the hydrothermal system, duration of the steam flow through both variants of the steam turbine for steam reduction is determined. The thermodynamic calculation of the steam turbine for steam reduction is aimed at determination of the power output and its comparison with the power outputs of the steam turbines for steam reduction considered. In the economical profitability calculation, basic economical quantities are given for both the solutions and the more suitable solution is recommended.
APA, Harvard, Vancouver, ISO, and other styles
8

Kluzová, Ivana. "Návrh soustavy CZT a tepelných zdrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography