Relevant bibliographies by topics / Spalinový kotel

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Spalinový kotel'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Spalinový kotel.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Spalinový kotel"

1

Smolinský, Petr. "Dvoutlaký horizontální kotel na odpadní teplo (HRSG)." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232159.

Full text
Abstract:
This master‘s thesis deals with the design of horizontal heat recovery steam generators (HRSG) with two pressure levels after a combustion turbine. In the introduction part is performed thermal calculation and proposal of a heat transfer surfaces. Furthermore, are suggested dimensions of the drums and pipes for flooding and transferring. The emphasis is placed on the fulfillment the required parameters of steam and flue gas at HRSG outlet. At the end is calculated loss of boiler draft and made technical documentation a drawing of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
2

Maršík, Jaroslav. "Dvoutlaký horizontální kotel na odpadní teplo (HRSG)." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232157.

Full text
Abstract:
The Master’s thesis dealing with design of heat recovery steam generator with two pressure levels is split into nine sections. The first section describes the design and the layout of HRSG. The second part deals with heat calculation. The third section deals with design of flue-gas duct. The fourth part describes designs of individual heating surfaces, including steam superheaters, vaporizers and economizer. Next section shows the real temperature diagram and choice of the materials. The seventh section describes the calculation of outer pipelines and the eighth part deals with the drums design. The last section deals with the calculation of draft loss of steam generator.
APA, Harvard, Vancouver, ISO, and other styles
3

Dlouhá, Kristýna. "Návrh HRSG kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401508.

Full text
Abstract:
This master’s thesis deals with the design of a heat recovery steam generator. The introductory part of the thesis is dedicated to waste heat boilers, their division and their utilization in combined cycles gas turbine. In the following chapter, an analysis of the existing combined heat and power plant operation is performed. In the next part of the thesis, the conceptual layout of the new source is designed. Subsequently, the thermal calculation of the boiler is carried out as well as the design of individual heat exchanging surfaces. The sixth chapter deals with the strength calculation of the boiler and the outer piping, chambers and drum are designed here. At the end of the thesis there are described off-design states of the new combined cycle gas turbine.
APA, Harvard, Vancouver, ISO, and other styles
4

Hradil, Lukáš. "Posouzení kotle na odpadní teplo." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228700.

Full text
Abstract:
This theses work is concerned with assessment of transfer line exchanger behind pusher furnace. First part is describing technical characteristic and parametres. The most important part of this theses is thermic calculation of the boiler. Last following part is concerned with suggestions of constructional modifications of heating surface for proper functioning of boiler. These modifications are demonstrated by scheme in the enclosure.
APA, Harvard, Vancouver, ISO, and other styles
5

Pauliny, Jan. "Navrh dvoutlakého horizontálního kotle na odpadní teplo (HRSG) za plynovou turbínou na zemní plyn." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254218.

Full text
Abstract:
Tato diplomová práce se zabývá návrhem dvojtlakého horizontálního kotle využívající teplo spalin za spalovací turbínou na zemní plyn. Zahrnuje návrh a výpočet jednotlivých výměníků, jejich základní uspořádání s ohledem na požadované parametry výstupní páry a dané vstupní a výstupní parametry spalin. Dále tato práce zahrnuje výpočet a konstrukční návrh parních bubnů, zavodňovacích trubek a převáděcích potrubí. Tato práce je zakončena výpočtem a prověřením tlakových ztrát mezi vstupem a výstupem kotle. Důležitou součástí této práce je přiložena výkresová dokumentace.
APA, Harvard, Vancouver, ISO, and other styles
6

Med, Lukáš. "Návrh dvoutlakého horizontálního kotle na odpadní teplo." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241924.

Full text
Abstract:
This master's thesis deals with thermal calculation and design of proportions of calorific components of a heat recovery steam generator (HRSG), which is placed behind a combustion turbine, for given parameters of exhaust gases and requested parameters of steam. In the first chapters is described the design, layout of HRSG and the thermal calculation. The next parts deal with the design of flue-gas duct and each individual heating surface. Next section shows computations of dimensions of drums, flooding pipes, transferring pipes and all other outer pipes. The chosen materials are described in one of the last chapters and the last chapter deals with calculation of draft loss of steam generator.
APA, Harvard, Vancouver, ISO, and other styles
7

Loukota, Martin. "Návrh dvoutlakého vertikálního kotle na odpadní teplo za plynovou turbínou na zemní plyn." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319280.

Full text
Abstract:
This master‘s thesis deals with design of vertical heat recovery steam generators (HRSG). In the introduction part is performed description and distribution HRSG, thermal calculation, proposal of a heat transfer surfaces and choice of materials. Finally is executed aerodynamic calculation, hydraulic calculation and then are suggested dimensions of the drums. Thesis also includes technical documentation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
8

Ptáček, Ondřej. "Návrh dvoutlakého vertikálního kotle na odpadní teplo za plynovou turbínou na zemní plyn." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319246.

Full text
Abstract:
This diploma thesis deals with proposal of a two-lane vertical boiler using the waste heat after gas turbine. In the first part the heat calculation has been done followed by the arrangement of particular heat exchange surfaces and the drawing of real saw diagram. There are also dimensions of drums, inlet and outlet pipes and transfer pipelines drafted. Furthermore, I have listed the materials that are used for casing the boiler and pipelines. Finally, the boiler loss is calculated and the boiler hydraulic calculation is performed. The supplement contains a boiler drawing.
APA, Harvard, Vancouver, ISO, and other styles
9

Přidal, Milan. "Kombinované paroplynové zařízení se spalovacími motory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jára, Marek. "Vytápění bytového domu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409867.

Full text
Abstract:
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography