Relevant bibliographies by topics / Spalovací vzduch / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Spalovací vzduch.

Dissertations / Theses on the topic 'Spalovací vzduch'

Author: Grafiati
Published: 4 June 2021
Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 32 dissertations / theses for your research on the topic 'Spalovací vzduch.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Novozámský, Richard. "Chlazení stlačeného vzduchu pro spalovací motor kategorie CDS SEMI-PRO." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399307.

Full text
Abstract:
This diplom thesis describes design of new pressured air cooling system for trubocharged Diesel engine used in CDS Semi-Pro competitions. First part is focused on analysis external conditions influencing the desing. Second part pays attention to simulations of performance. Third part describes design of two systems and possible testitng method. In last part, the real parametrs are put into the computing model followed by verification of the results and evaulation of the designed systems.
APA, Harvard, Vancouver, ISO, and other styles
2

Tichý, Jiří. "Konstrukční řešení experimentálního předehřívače vzduchu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231501.

Full text
Abstract:
The thesis is focused on structural design of unconventional experimental combustion air preheater into drawing documentation needed for production and realization. Strength and expansion control of exposed elements of construction is also included in the thesis. The final design is obtained by gradual specification of pre-designed and strength and expansion controlled elements of construction. The work also includes discussion of structural properties of the final design.
APA, Harvard, Vancouver, ISO, and other styles
3

Vítek, Zdeněk. "Krbová vložka pro vytápění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230376.

Full text
Abstract:
This diploma thesis deals with combustion of wood in small fireplace, fireplace inlay specifically. This thesis is divided into four main parts. First chapters follow up stoves and their construction. The second parts describes the calculation and design of the stove. The third part focuses on the manufacturing of fireplace. At the end there is a description of experimental measurements produced a prototype, the determination of emmisions and efficiency.
APA, Harvard, Vancouver, ISO, and other styles
4

Kudela, Libor. "Aerodynamický výpocet vzduchové části parního kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319279.

Full text
Abstract:
The aim of this thesis is to realize analysis of problematics of aerodynamic calculations of steam boilers on the part of combustion air. On the basis of project documentation realize evaluations of sectional dissipation factors of each component of inlet tract. Realize calculation of summary pressure (draft) loss. Specify components with highest loss and propose options of their optimization.
APA, Harvard, Vancouver, ISO, and other styles
5

Strnad, Ondřej. "Roštový kotel na spalování dřevní štěpky - 96,4 t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417550.

Full text
Abstract:
This thesis deals with issue of grate boilers. It describes their properties, function principles and usage. The main part of this thesis is design of grate boiler burning biomass with steam output 96.4 tons/hour. Steam temperature and pressure at the output are 490 °C and 8.1 MPa.
APA, Harvard, Vancouver, ISO, and other styles
6

Kareš, Martin. "Návrh ohříváku spalovacího vzduchu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443184.

Full text
Abstract:
This diploma thesis is dedicated to the design of a combustion air heater for a biomass boiler with a water content of over 60%. The first part of the thesis describes biomass and its use in energetics. Furthermore, the stoichiometry of combustion, heat transfer in the exchanger, design of dimensions and air pressure losses are calculated. The last chapter describes the method of air heating regulation.
APA, Harvard, Vancouver, ISO, and other styles
7

Šimeček, Radek. "Vliv teploty spalovacího vzduchu na parametry spalovacího procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-403868.

Full text
Abstract:
Tato diplomová práce se zabývá předehřevem spalovacího vzduchu a jeho vlivem na parametry spalovacího procesu. V teoretické části je zpracován přehled nejčastějších znečišťujících látek z průmyslového spalování. Je popsána aktuálně platná relevantní legislativa v Evropské unii a jsou porovnány její implementace do národní legislativy v České republice a v Německu. Dále je provedena klasifikace hořáků z hlediska různých kritérií a rešerše předchozí práce v oblasti předehřevu spalovacího vzduchu. Na zkušebně hořáků byla provedena experimentální studie dvou různých hořáků na zemní plyn při konstantním tepelném příkonu 750 kW se spalovacím vzduchem předehřátým až na 250 °C. Výsledky odhalily pozitivní vliv předehřevu na účinnost spalování. Množství emisí NOx a CO naopak rostlo s teplotou spalovacího vzduchu.
APA, Harvard, Vancouver, ISO, and other styles
8

Polák, Luboš. "Zvýšení výkonu mikroturbíny pracující v nepřímém oběhu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230159.

Full text
Abstract:
Turbogenerator unit 100B TGU, produced in the First Brno Engineering Velká Bíteš a.s., works in Brayton indirect circulation. The aim of this work is the proposal to increase performance levels of technological unit in which the micro-turbine is applied. The work presents various ways to increase performance and efficiency of circulation. The possible options are compared with each of the technological and economic terms. Based on these criteria was selected variant feeding additional water into the circulation. For this design was the work of a mathematical model based on, which was established as the economic balance of the selected variants. The thesis also proposes a technological scheme, which is already incorporated the selected variant and an outline of the verification tests.
APA, Harvard, Vancouver, ISO, and other styles
9

Dřímal, Jiří. "Parametry procesu spalování při využití vzduchu s obsahem kyslíku vyšším než 21 %." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231276.

Full text
Abstract:
The thesis is focused on the experimental investigation of the oxygen enhanced combustion technology (OEC), which uses the combustion air with higher concentration of oxygen, i.e. more than 21 %. The OEC technology is used in those industrial applications, which requires higher thermal efficiency, increased productivity, improved character of the flame, reduced equipment cost, lower volume of exhaust gases and improved product quality. Although this technology involves a number of advantages, it is appropriate to mention some of its disadvantages such as refractory damage, inconsistent heating, increased pollutant emission or flame disturbance and/or flashback. The combustion tests of OEC were carried out at the burners testing facility that enables to test many types of burners (gaseous, liquid, or combined). The two-staged low-NOx burner fired by natural gas was used during the tests. The observed parameters include the effect of oxygen concentration in the combustion air on the NOx emissions, heat flux into the wall of the combustion chamber, in-flame temperature distribution in the horizontal symmetry plane of the combustion chamber and also the shape and dimensions of the flame. The combustion tests of the air-enrichment, air-oxy/fuel and O 2 lancing OEC methods were carried out at the burner thermal input of 750 kW and air excess of 1,1 for two combustion regimes, namely one-staged and two-staged fuel supply.
APA, Harvard, Vancouver, ISO, and other styles
10

Naď, Martin. "Modelování procesu spalování při využití vzduchu s obsahem kyslíku vyšším než 21 %." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231411.

Full text
Abstract:
The main purpose of the master´s thesis is the experimental study and the mathematical modelling of the combustion process in which the combustion air is enriched with the high-purity oxygen, i.e. the oxygen content is more than 21 %. This combustion technology is called as the oxygen-enhanced combustion (OEC). Since the experimental work required the manipulation with the pure oxygen, a part of the thesis is focused on risks and necessary safety associated therewith. The detailed description of the combustion chamber as well as of the components necessary for the operation of OEC is included. The main part of the thesis is the computational model of the combustion chamber and the simulation of OEC using CFD methods. The numerical results were then compared with the experimental data acquired during the combustion tests, namely the heat flux distribution along the combustion chamber and the distribution of in-flame temperatures in the horizontal symmetry plane of the chamber.
APA, Harvard, Vancouver, ISO, and other styles
11

Hudák, Igor. "Charakteristické parametry procesu spalování při využití vzduchu s obsahem kyslíku vyšším než 21 %." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230473.

Full text
Abstract:
Diplomová práce se zabývá spalováním zemního plynu při využití vzduchu s vyšším obsahem kyslíku (21–46 % kyslíku ve spalovacím vzduchu), tzv. kyslíkem obohaceným spalováním (OEC). Technologie OEC nalezla uplatnění v průmyslu, kde se jsou nároky na zvýšenou produktivitu, dosažení vyšší tepelné účinnosti, zlepšení vlastností plamene, snížení náklady, či zlepšení kvality výsledného produktu. Ačkoliv OEC přináší řadu výhod, je nutné zmínit i nevýhody jako: poškození zařízení, nestejnoměrné zahřívání, narušení plamene, zvýšené emise anebo zpětný zášleh plamene. Zkoušky proběhly na zkušebně hořáků, která umožňuje testovat hořáky nejen na plynná a kapalná paliva, ale i hořáky navržené pro kombinované spalování při maximálním výkonu hořáku 1 800 kW. Při zkouškách byl použit plynový „low-NOx“ hořák se stupňovitým přívodem paliva. V diplomové práci je popsán vliv obsahu kyslíku ve spalovacím vzduchu na emise oxidů dusíku (NOx), teplotu plamene, přenos tepla ze spalin do stěn spalovací komory, a také vlastnosti plamene, zvláště pak jeho stabilitu, tvar a rozměry. Zkoušky proběhly při výkonech 300 kW, 500 kW a 750 kW, přičemž pro výkon 750 kW proběhly testy jak při jednostupňové, tak dvoustupňové konfiguraci.
APA, Harvard, Vancouver, ISO, and other styles
12

Machara, Radek. "Návrh kotle na spoluspalování vysokopecního plynu a koksárenského plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319265.

Full text
Abstract:
The diploma thesis deals with design of gas steam boiler with given parameters of steam. Blast furnace and coke oven gas are used as fuel. At the beginning of this work, both co-fired fuels are presented to us, their chemical analysis and stoichiometry are performed. The main part of the diploma thesis deals with the dimensioning of individual heat exchange surfaces such as steam superheaters, evaporators, economizers and air heaters. All heat exchange surfaces meet recommended parameters such as recommended steam rates, flue gas, etc. At the end, the total heat balance of the boiler is performed. Part of the work is also drawing documentation showing the main dimensions of the boiler. It is also indicated the connection of individual heat exchange surfaces.
APA, Harvard, Vancouver, ISO, and other styles
13

Pavlo, Matej. "Kotel na spalování hnědého uhlí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241847.

Full text
Abstract:
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
14

Szabó, Gergely. "Roštový kotel na spalování biomasy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254294.

Full text
Abstract:
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
15

Baláži, Martin. "Roštový kotel na spalování uhlí a dřevní biomasy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241700.

Full text
Abstract:
This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.
APA, Harvard, Vancouver, ISO, and other styles
16

Šenovský, Petr. "Parní kotel s přihříváním páry na spalování vysokopecního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231184.

Full text
Abstract:
The aim of this Diploma thesis is design of steam boiler with steam reheating, for combustion the blast furnace gas. The fuel composition and primary parameters for calculation of the boiler were provided. In the first part the fuel composition is described. The main part of the thesis consists of stoichiometric calculations, establishing efficiency of the boiler, calculating combustion chamber as well as design and calculation individual heating surfaces. Part of the work is also drawing documentation of boiler.
APA, Harvard, Vancouver, ISO, and other styles
17

Střecha, Josef. "Roštový kotel na spalování biomasy - 88 t/h; 9,6 MPa; 520 °C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318641.

Full text
Abstract:
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
APA, Harvard, Vancouver, ISO, and other styles
18

Bartůněk, David. "Roštový kotel na spalování uhlí a bagasy - 200 t/h, 9,3 MPa, 520 °C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318807.

Full text
Abstract:
The object of the thesis is to design a grate boiler for bagasse and brown coal combustion with a heat output of 160 MW. Calculations of a flue gas stoichiometry are based on known element analyses of each fuel. The crucial part of the thesis includes designs of heat-exchanging surfaces, where the bagasse is considered as the main fuel while the brown coal is the spare one. Overall thermal balance and an actual boiler efficiencies are provided in last chapters. The boiler-outlet flue gas temperature is compared with the dew point temperature at the very end of the thesis. As a part of the thesis there is a design of the boiler attached.
APA, Harvard, Vancouver, ISO, and other styles
19

Ptáček, Martin. "Krbová vložka." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229727.

Full text
Abstract:
The goal of this thesis is examination of automatic controller in various operating modes on fireplace inlay Venus 12.1.W. The work compares few measurement, always with measurment without automatic controller In this measurements are evaluated the emissions of CO, CO2, oxygen content in the flue duct gasses and the temperature in the flue duct are listed here and the efficiency is calculated for different operating modes. Conclusion contains overall summary of this thesis. At the end there is a search of manufacturers not only in Czech Republic
APA, Harvard, Vancouver, ISO, and other styles
20

Kalousek, Lukáš. "Krbová vložka pro vytápění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229744.

Full text
Abstract:
The main topic of thesis is a measurement realized on the fireplace-insert. Thesis is consists of three parts. First part is focused on wood combustion and overview of fireplace-inserts construction. Second part contains the description of fireplace-insert Bety and accomplished construction changes. Third and main part is consists from measurements, calculations and finally assessments of measurement´s configurations.
APA, Harvard, Vancouver, ISO, and other styles
21

Bytešník, Jan. "Fluidní kotle s cirkulující fluidní vrstvou na spalování čisté dřevní hmoty." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229232.

Full text
Abstract:
This master thesis designes the calculation of fluid boiler with specific part - the circular fluid bed. The heat is given by combustion of wood biomass. The thesis is devided into several parts. All necessary elementary results are going to be reached within these parts: an analysis of solid fuel, stechiometry calculation, discussion on output limits and the environmental point of view, definition of elemental heat losses and general heat efficiency, calculation and design of a combustion part and its heat loads and calculation of enthalpies with different ash concentrations. All these phases get to a successful design of the fluid boiler heat balance and sizes of heat-flow surfaces. The composition of the boiler shows the added drawing.
APA, Harvard, Vancouver, ISO, and other styles
22

Horák, Stanislav. "Návrh parního kotle na spalování hnědého uhlí, parametry páry 235 t/h, 14 MPa, 540°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231220.

Full text
Abstract:
The aim of the work is to design a brown coal combustion boiler of 235 t/h output. The work is divided into several parts. First, stechiometric calculations and calculations enthalpy of air and flue gas are performed. It is calculated heat balance of the boiler, the boiler losses and the thermal efficiency of the boiler is determined. After designing the combustion chamber thermal calculation is made. Then, individual heating surfaces are proposed and at the end of the calculations are controlling the overall energy balance of the boiler. For calculation was design documentation added.
APA, Harvard, Vancouver, ISO, and other styles
23

Čech, Jaroslav. "Roštový kotel na spalování uhlí a nebo dřevní biomasy o parametrech 200 t / h 9,3 MPa, 520°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232166.

Full text
Abstract:
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
APA, Harvard, Vancouver, ISO, and other styles
24

Štelcl, Otakar. "Návrh krbové vložky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229258.

Full text
Abstract:
Abstract The diploma thesis is divided into five main parts. First part deals with wood as a firing in term of its composition, emissions of carbon dioxide and its properties. The second part describes the calculation of a stove fire, especially stoichiometry of firing, temperature of uncooled flame and area of combustion chamber. The third part focuses on the proposal for a stove fire in connection with comparative criteria of the fireplace, shape of the combustion chamber and the tertiary air jet. The fifth part describes a manufacturing of the stove fire in the work-room at VUT Brno. The major part of the diploma work pays attention to the measuring of stove fire parameters for the effectivity calculation, measuring section of combustion gas and measurement evaluation with stove fire constructional modifications
APA, Harvard, Vancouver, ISO, and other styles
25

Špiláček, Michal. "Parní kotel na dřevní štěpku s pískem 92,5t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229802.

Full text
Abstract:
This master’s thesis is dealing with design of steam boiler for wood chips. Wood chips are considered as biomass and so the steam boiler is considerate to enviroment. Main purpose of this work is calculation of size and number of water/steam heating surfaces so the boiler can produce steam with required parametres of temperature, pressure and amount.
APA, Harvard, Vancouver, ISO, and other styles
26

Růsek, Lukáš. "Plnící turbodmychadlo." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228804.

Full text
Abstract:
A masters thesis deals with the question of deisel engine boosting by rotary turbochargers. The objective of the thesis is to propose suitable turbocharger´s concept for defined diesel combustion engine with power of 430 [kW]. The air boosting pressure is controlled by exhaust gas flow through the turbine and different EGR regimes, which are considered in the basic and corrected calculations. The final turbocharger´s concept is proposed to satisfy the defined technical requirements. Next technical recommendations are briefly summarized in the thesis conclusion for following turbocharger´s concept application.
APA, Harvard, Vancouver, ISO, and other styles
27

Broukal, Jakub. "Výpočtové modelování laboratorního hořáku programem FLUENT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228876.

Full text
Abstract:
Tato diplomová práce je zaměřena na porovnání různých turbulentních a chemických modelů na příkladu volné metanové trysky ústící do vzduchu. Nejprve je uveden teoretický úvod k modelům, následován CFD (Ansys Fluent) simulacemi plamene pomocí vybraných modelů. Jako součást práce je provedeno a vyhodnoceno experimentální měření. V závěru jsou experimentální výsledky porovnány s nasimulovanými daty.
APA, Harvard, Vancouver, ISO, and other styles
28

Dohnal, Jakub. "Kotel na spoluspalovaní vysokopecního plynu a koksárenského plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-242878.

Full text
Abstract:
This diploma thesis deals with the constructional and calculation design of boiler for blast furnace and coke gas mixture combustion, including sizing of the heating surfaces. The opening section is dedicated to a brief characterization of burned fuels. The following chapter shows the parameters and composition of the resulting fuel mixture. The main part of this thesis involves; determining the stoichiometric amount air required for combustion and the resulting flue gas, determining the boiler efficiency and steam production rate, calculations regarding the combustion chamber and the detailed design of the individual heat exchangers. At the end of the thesis the heat balance of the entire boiler is verified. Drawing documentation of boiler is also part of this diploma thesis.
APA, Harvard, Vancouver, ISO, and other styles
29

Frei, Patrik. "Vliv teploty plnicího vzduchu na výkonové parametry vznětového motoru." Master's thesis, 2018. http://www.nusl.cz/ntk/nusl-426722.

Full text
Abstract:
This diploma thesis deals with problems of supercharged diesel engines. In the beginning, the engine description is generally followed by a supercharged engine, complete with diagrams. Attention was paid mainly to the properties of charge air when changing humidity, temperature and pressure. Subsequently, the design of the supercharged diesel-engine was described. After the measurement methodology was completed, the performance measurements of the vehicle were realized on chassis dynamometer located at the Mendel University. The results of the measurements before and after the modification of the combustion air cooler were processed and evaluated.
APA, Harvard, Vancouver, ISO, and other styles
30

Bělánek, Lukáš. "Vliv teploty, tlaku a vlhkosti spalovacího vzduchu na výkonové parametry motoru." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-87359.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Lužný, Jan. "Vliv teploty, tlaku a vlhkosti spalovacího vzduchu na výkonové parametry motoru." Master's thesis, 2009. http://www.nusl.cz/ntk/nusl-96112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Bárta, Jiří. "Vliv teploty plnícího vzduchu na parametry přeplňovaného motoru." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-429936.

Full text
Abstract:
The thesis entitled ,The influence of charge air temperature on supercharged engine parameters, deals with thermodynamics of internal combustion engine in the first part. Next part describes systems of supercharging internal combustion engines and charge air cooling systems for supercharged engines. The final part is dedicated to analysis of measured data. The measurement took place at the engine testing room of XXX in Brno. The aim of the thesis is to determine the influence of intake air temperature on supercharged engine parameters.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography