Relevant bibliographies by topics / Special tool holder

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Special tool holder'

Author: Grafiati
Published: 4 June 2021
Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Special tool holder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Special tool holder"

1

Li, Guang Hui, Xu Hong, Lin Lin Guo, Wei Bo, and Guang Yu Tan. "Non-Standard Structure Design and Modal Analysis of Embedding Function Module of Tool Holder." Applied Mechanics and Materials 446-447 (November 2013): 581–84. http://dx.doi.org/10.4028/www.scientific.net/amm.446-447.581.

Full text
Abstract:
According to the structure and characteristics of the HSK-A63 tool holder, we design and retrofit the non-standard tool holder with special function module. Establish and assemble three-dimensional entity models of embedded temperature measuring tool holder, ER collet/nut and flat end mill with Pro/E 5.0. Based on the establishment of the reasonable boundary conditions and meshing of the tool holder assembly, natural frequency and vibration modes of the tool holder assembly are calculated by modal analysis with the Ansys Workbench. These analysis results are the important research basis for th
APA, Harvard, Vancouver, ISO, and other styles
2

Löschner, Piotr, Piotr Niesłony, Roman Chudy, Paweł Biłous, and Marek Lipowczyk. "Evaluation of surface roughness after milling with a tool with modified vibration damper." Mechanik 91, no. 8-9 (2018): 720–23. http://dx.doi.org/10.17814/mechanik.2018.8-9.114.

Full text
Abstract:
This article presents the research results regarding chosen surface roughness parameters after milling with a standard holder and a holder equipped with a special modified vibration damper. The experimental research was conducted on a novel research stand. Obtained results have confirmed a positive effect of the modified vibration damper on machined surface quality.
APA, Harvard, Vancouver, ISO, and other styles
3

Patwari, Md Anayet Ullah, Md K. Bashar, Mohammad Ahsan Habib, Abdul Aziz, and Mahfuz Alam. "Development of a Passive Damping Tool Holder for the Improvement of Surace Roughness in Turning Operation of Stainless Steel." Applied Mechanics and Materials 860 (December 2016): 70–73. http://dx.doi.org/10.4028/www.scientific.net/amm.860.70.

Full text
Abstract:
One special type of passive damping setup has been used to investigate the surface responses with the variation of different process parameters. In this study, a special design capsule type tool holder has been used to investigate the process parameters effect in machining of stainless steel during turning operations under different cutting condition such as-RPM, feed, depth of cut. Inside the capsule high viscous fluid is used as damping materials and its effects has been investigated accordingly. The effect of damping during turning process is investigated by studying generated surface profi
APA, Harvard, Vancouver, ISO, and other styles
4

Kazerooni, H., J. J. Bausch, and B. M. Kramer. "An Approach to Automated Deburring by Robot Manipulators." Journal of Dynamic Systems, Measurement, and Control 108, no. 4 (1986): 354–59. http://dx.doi.org/10.1115/1.3143806.

Full text
Abstract:
The deburring process of manufactured parts has been investigated theoretically and experimentally as a frequency domain control problem with special regard to application by industrial robot manipulators. A new control strategy has been developed for precision deburring to guarantee burr removal while compensating for robot oscillations and small uncertainties in the location of the part relative to the robot. Compliant tool-holders, designed according to the above control strategy, provide the required normal and tangential forces for deburring. A servo positioning table used to holds parts,
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Feng, Bin Lin, and Yu Mei Gong. "Optimization for the Connection Parameters of HSK Tool Shanks." Applied Mechanics and Materials 37-38 (November 2010): 806–9. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.806.

Full text
Abstract:
In this paper, the connection parameters of HSK tool-holder are investigated. After simulation analyses, the results show that the positioning accuracy of tool taper face and flange face can be improved for mezzo magnitude of interference and medium-high pre-tighten force. Meanwhile, higher magnitude of interference and pre-tighten force are more favorable for the stiffness improvement of HSK tool. For the special spindle structure, the optimal priorities of the connecting system with different parameters are obtained with the analytic hierarchy process.
APA, Harvard, Vancouver, ISO, and other styles
6

Mohammad, Ummu Atiqah Khairiyah B., A. K. M. N. Amin, Muhd Amir Hafiz Bin Ahamad Mahrodi, and Muammer D. Arif. "Chatter Suppression with Magnetic Damping in Turning of Stainless Steel AISI 304." Applied Mechanics and Materials 393 (September 2013): 183–88. http://dx.doi.org/10.4028/www.scientific.net/amm.393.183.

Full text
Abstract:
Chatter is almost an unavoidable phenomenon during machining, normally accompanied by a characteristic sharp and monotonous noise. Apart from noise pollution in the industry, chatter leaves a bad surface finish on the part and negatively influences dimensional tolerances, reduced productivity, excessive tool wear and damaged machine-tool components. Therefore, chatter avoidance is utmost importance. However, a deeper investigation into chatter formation reveals that chatter appears during metal cutting process as a result of resonance caused by interaction of the prominent natural frequencies
APA, Harvard, Vancouver, ISO, and other styles
7

Mikolajczyk, Tadeusz, Danil Pimenov, Catalin Pruncu, et al. "Obtaining Various Shapes of Machined Surface Using a Tool with a Multi-Insert Cutting Edge." Applied Sciences 9, no. 5 (2019): 880. http://dx.doi.org/10.3390/app9050880.

Full text
Abstract:
A novel design of a universal form tool is presented for machining complex planar and axisymmetric surfaces. The geometric and kinematic flexibility (GKF) of this tool type means that it can machine a wide range of profiles using a single setup. The operating principle of this multi-insert tool is its combination of single cutting edges, each of which form the individual details of the machined surface. The structure and application of both turning and milling multi-insert tools with combinations of single edges are described in the paper. Complex shapes and forms can be machined by changing t
APA, Harvard, Vancouver, ISO, and other styles
8

Zębala, W. "Tool stiffness influence on the chosen physical parameters of the milling process." Bulletin of the Polish Academy of Sciences: Technical Sciences 60, no. 3 (2012): 597–604. http://dx.doi.org/10.2478/v10175-012-0071-0.

Full text
Abstract:
Abstract This article presents our own model researches, relating to the down milling process of Aluminium alloy (Al6061) and Titanium alloy (Ti6Al4V), with a tool made of sintered carbides. These investigations pay the special attention to the impact of the tool rigidity on the process of chip formation. The simulation calculations have been carried out for two cases of the cutting process: case 1 - assuming an ideally rigid construction of a milling cutter (length of tool does not impact its deflection under the cutting forces); case 2 - it is possible that the tool can be subjected to defle
APA, Harvard, Vancouver, ISO, and other styles
9

Popa, Carmen Teodora. "HERITAGE AFFECTATION CONSIDERATIONS." Oradea Journal of Business and Economics 2, no. 2 (2017): 85–88. http://dx.doi.org/10.47535/1991ojbe030.

Full text
Abstract:
The present work intends to analyse the institution of affected heritage in the light of the rules and regulations of the civil code and the special laws. The constitution of an affected patrimony intended for the exercise of a profession or of the operation of an enterprise, constitutes a useful tool for legal professionals and separation from the rest, marks the separation from the rest of the assets and liabilities that constitute the guarantee of the general creditors of the person undertaking the physical authorized holder or individual members of the family enterprise.
APA, Harvard, Vancouver, ISO, and other styles
10

Kim, Jong Deok, Young Moo Heo, and Heung Kyu Kim. "An Experimental Study on the Die Roll Height According to the V-Ring Distance of the Fine Blanking Tool for the Seat Recliner Holder with Various Corner Shapes." Advanced Materials Research 626 (December 2012): 109–13. http://dx.doi.org/10.4028/www.scientific.net/amr.626.109.

Full text
Abstract:
In this paper, the relation between die roll height and V-ring distance of a fine blanking tool was studied by experimenting on a special designed seat recliner holder with various corner shapes. Three guide plate inserts with different V-ring distances and a die insert with constant die chamfer were machined, and a fine blanking tool was manufactured for the experiments. Three experiments were conducted on a 650-ton fine blanking press. Each die roll height on the sample from the experiments was measured and analyzed. It should be noticed that the die roll heights on the corner shapes of fine
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Special tool holder"

1

Železný, Lukáš. "Rozbor výroby hřídelí přesných servomotorů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229761.

Full text
Abstract:
The thesis is focused on making the most efficient actuator shaft, using machinery company. Using Fanuc's control system on all machines with examples of their use in practice. Production and integration of a special holder for the drill stage.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Special tool holder"

1

Parker, Philip M. The 2007-2012 World Outlook for Holders for Special Tooling and Attachments for Box Tools, Tool Holders, Turrets, Rollers, and Other Screw and Automatic Machines. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

The 2006-2011 World Outlook for Holders for Special Tooling and Attachments for Box Tools, Tool Holders, Turrets, Rollers, and Other Screw and Automatic Machines. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kiefer, Claus. Time in Quantum Gravity. Edited by Craig Callender. Oxford University Press, 2011. http://dx.doi.org/10.1093/oxfordhb/9780199298204.003.0024.

Full text
Abstract:
This chapter notes that quantum gravity places the concept of time on a new level. In the absence of experimental hints, mathematical and conceptual issues must be chosen as the guides in the search for such a theory. Just as reconceiving classical notions of time was key for Einstein, in his discovery of special relativity, so too many believe that time will again hold the clue for theoretical advancement, but this time with quantum gravity. The chapter details the challenge of reconciling quantum theory with relativity, concentrating especially on why time in particular causes trouble. It de
APA, Harvard, Vancouver, ISO, and other styles
4

Songster, E. Elena. Conclusion. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780199393671.003.0010.

Full text
Abstract:
The panda did not become an official symbol of the PRC in a debate over worthy animal emblems, but emerged as a representation of China in various contexts by fulfilling specific needs of the nation. The giant panda became broadly relevant to human society when it was deemed a scientifically interesting animal. International research on pandas has probed most every aspect of the animal’s being. The Chinese government’s persistent endorsement of wide-ranging scientific work on the giant panda over the course of PRC history reflects the tremendous value the Chinese state has placed on the panda
APA, Harvard, Vancouver, ISO, and other styles
5

Weingart, Peter, Marina Joubert, and Bankole Falade. Science Communication in South Africa: Reflections on Current Issues. African Minds, 2020. http://dx.doi.org/10.47622/9781928502036.

Full text
Abstract:
Why do we need to communicate science? Is science, with its highly specialised language and its arcane methods, too distant to be understood by the public? Is it really possible for citizens to participate meaningfully in scientific research projects and debate? Should scientists be mandated to engage with the public to facilitate better understanding of science? How can they best communicate their special knowledge to be intelligible? These and a plethora of related questions are being raised by researchers and politicians alike as they have become convinced that science and society need to d
APA, Harvard, Vancouver, ISO, and other styles
6

Wittman, David M. The Elements of Relativity. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780199658633.001.0001.

Full text
Abstract:
Relativity is a set of remarkable insights into the way space and time work. The basic notion of relativity, first articulated by Galileo, explains why we do not feel Earth moving as it orbits the Sun and was successful for hundreds of years. We present thinking tools that elucidate Galilean relativity and prepare us for the more modern understanding. We then show how Galilean relativity breaks down at speeds near the speed of light, and follow Einstein’s steps in working out the unexpected relationships between space and time that we now call special relativity. These relationships give rise
APA, Harvard, Vancouver, ISO, and other styles
7

Wilson, James. Philosophy for Public Health and Public Policy. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780192844057.001.0001.

Full text
Abstract:
This book provides a novel theory of the philosophy of public health and public policy. It is addressed both to philosophers and to policymakers, inviting policymakers to rethink the nature of public policy, and philosophers to rethink the nature of philosophy. The book is divided into three parts. Part I argues that a number of popular philosophical tools such as thought experiments are poorly calibrated for providing guidance to policymakers. It advances a new approach to philosophy, which draws both on pragmatism and on complex systems science. Part II examines the role of ethical values in
APA, Harvard, Vancouver, ISO, and other styles
8

Taking Stock of Regional Democratic Trends in Asia and the Pacific Before and During the COVID-19 Pandemic. International Institute for Democracy and Electoral Assistance, 2020. http://dx.doi.org/10.31752/idea.2020.70.

Full text
Abstract:
This GSoD In Focus Special Brief provides an overview of the state of democracy in Asia and the Pacific at the end of 2019, prior to the outbreak of the pandemic, and assesses some of the preliminary impacts that the pandemic has had on democracy in the region in 2020. Key fact and findings include: • Prior to the outbreak of the COVID-19 pandemic, countries across Asia and the Pacific faced a range of democratic challenges. Chief among these were continuing political fragility, violent conflict, recurrent military interference in the political sphere, enduring hybridity, deepening autocratiza
APA, Harvard, Vancouver, ISO, and other styles
9

Johansen, Bruce, and Adebowale Akande, eds. Nationalism: Past as Prologue. Nova Science Publishers, Inc., 2021. http://dx.doi.org/10.52305/aief3847.

Full text
Abstract:
Nationalism: Past as Prologue began as a single volume being compiled by Ad Akande, a scholar from South Africa, who proposed it to me as co-author about two years ago. The original idea was to examine how the damaging roots of nationalism have been corroding political systems around the world, and creating dangerous obstacles for necessary international cooperation. Since I (Bruce E. Johansen) has written profusely about climate change (global warming, a.k.a. infrared forcing), I suggested a concerted effort in that direction. This is a worldwide existential threat that affects every living t
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Special tool holder"

1

Debnath, K. "Drilling of composite laminates using a special tool point geometry." In Hole-Making and Drilling Technology for Composites. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-08-102397-6.00005-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aizawa, Tatsuhiko, Tadahiko Inonara, Tomoaki Yoshino, Tomomi Shiratori, and Yohei Suzuki. "Laser Treatment CVD Diamond Coated Punch for Ultra-Fine Piercing of Metallic Sheets." In Engineering Applications of Diamond. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.96446.

Full text
Abstract:
CVD-diamond coated special tools have been widely utilized to prolong their tool life in practical production lines. WC (Co) punch for fine piercing of metallic sheets required for high wear-toughness to be free from chipping and damages and for high product quality to punch out the holes with sufficient dimensional accuracy. The laser trimming process was developed to reduce the surface roughness of diamond coating down to submicron level and to adjust its diamond layer dimensions with a sharp punch edge for accurate piercing. The pulsed laser irradiation was employed to demonstrate that micro-groove was accurately formed into the diamond coating. Less deterioration in the worked diamond film by this laser treatment was proved by the Raman spectroscopy. The femtosecond laser trimming was proposed to sharpen the punch edge down to 2 μm and to form the nano-textured punch side surfaces with the LIPSS (Laser Induced Periodic Surface Structuring)-period of 300 nm. Fine piercing experiments were performed to demonstrate that punch life was significantly extended to continuous punching in more than 10,000 shots and that mirror-shining hole surfaces were attained in every shot by regularly coining the nanotextures. The sharp punch edge with homogeneous edge profile was responsible for reduction of the induced damages into work sheet by piercing. The punch life was extended by the ejection mechanism of debris particles through the nanotextures on the punch side surface. The present laser treatment was useful in trimming and nanostructuring the complex-shaped punch edge for industrial application.
APA, Harvard, Vancouver, ISO, and other styles
3

Rout, Anil Kumar, Niranjan Sahoo, and Vinayak Kulkarni. "An Overview of Stress and Strain Measurement Techniques." In Applications and Techniques for Experimental Stress Analysis. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1690-4.ch003.

Full text
Abstract:
Stress and strain are mechanical behaviour of materials, subjected to mechanical or thermal loading. The detrimental effect of such loading is the ultimate failure of materials due to generation of high stress and strain. Therefore, measurement and prediction of stress and strain values help in proper design and maintenance of engineering equipment and structures. The present contents elaborate and summarize different methods adopted by researchers for mechanical stress and strain measurements. The content is focused to provide an overview regarding the measurement techniques adopted for strain measurement. The analysis holds information regarding working principle of different strain measuring technique along with a brief description about the history of strain measurement. Special attention has also been devoted for explanation of thermal stress and strain measurement techniques. The modern non-contact techniques have evolved as a potential tool for such measurements even at higher temperature conditions.
APA, Harvard, Vancouver, ISO, and other styles
4

Swaminathan, Sudha. "Educational Technology in Early Childhood Teacher Education." In Developing Technology-Rich Teacher Education Programs. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0014-0.ch020.

Full text
Abstract:
Educational technology usage in early childhood education stands at a fork in the road. One path embellishes existing curricula with technology. The other, the more difficult passing, holds promises of technological transformations to the curricula and assessment in ways that can facilitate and propel child development. To support teachers in this path, early childhood teacher education programs need to transform themselves. The purpose of this chapter is to outline how these changes may occur within the context of national standards and policies, pedagogy and beliefs, curricular transformations, impact on children, and special tools. The authors suggests re-conceptualizing the content and delivery of college courses to support and inspire teachers to take the road less traveled. Additionally teachers need ongoing and recurrent support for continued progress in their educational technology usage.
APA, Harvard, Vancouver, ISO, and other styles
5

Islam, S. Nazrul. "Open approach to rivers in a delta." In Rivers and Sustainable Development. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780190079024.003.0012.

Full text
Abstract:
Chapter 12 presents the progress of and problems faced by the Open approach in the Bengal Delta and draws attention to the special merits of the Open approach in confronting the adverse effects of climate change in this delta. It surveys the findings of river scholars in the Indian part of the delta favoring the Open approach. Reviewing progress in the Bangladesh part of the delta, the chapter follows the struggle against the Flood Action Plan (FAP) that argued for big embankment projects in the wake of the historic flood of 1988. It notes the changes that took place in Bangladesh’s water-related institutional set up following the FAP process and the prospects they hold for promoting the Open approach. The chapter also presents a few examples of water projects that conform with the Open approach. It offers a critique of the recently formulated Bangladesh Delta Plan 2100 that fails to make a clear break from the Cordon approach. It reviews the development of the renewed, broad-based civic movement in Bangladesh for adoption of the Open approach.
APA, Harvard, Vancouver, ISO, and other styles
6

Filho, José Rodrigues, and Flavio Perazzo Barbosa Mota. "Public E-Procurement Implementation." In Inter-Organizational Information Systems and Business Management. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-60960-768-5.ch014.

Full text
Abstract:
Today most e-government and e-procurement research and discussion are done in a quite utilitarian and technical way. This follows the worldwide positivist and utilitarian approach to research that neglects the social, organizational, cultural, and political aspects of social life. Therefore, most research initiatives are based on a market-driven and utilitarian approach in which technology is treated as a mere tool. So, under the use of a traditional top-down model or the “tool-approach,” information and communication technologies (ICTs) have been implemented in developing countries detached from their social and political context, as an instrumental, static, elitist, and uncritical utilitarian approach, neglecting a deep investigation of how social, economic, and political factors are embedded in technology. In addition, most of the literature on e-procurement has been studied primarily from a business-to-business (B2B) perspective, and the field of public sector procurement has been neglected. Although public e-procurement has similarities with the private sector, it also has some special characteristics that make it different. Therefore, it is not clear to what extent recent decisions on public e-procurement have been optimal. In the broad competing views of information technology (IT), interpretative or constructivist approaches see the use of IT as the result of conflicts, negotiations, and interpretations of various interests that make it socially constructed. These competing views of technology help the formulation of an appropriate debate on e-procurement that holds enormous potential for cost savings, efficiency and benefit gains, and transparency. In this work, an attempt was made to show how qualitative research traditions like structuration theory (specifically the perspective of “dialectic of control”) and qualitative research analysis can be used in the analysis of e-procurement in Brazil, leading to results that differ substantially from the mainstream positivist research that does not always touch the barriers and challenges that can constrain the adoption and implementation of public e-procurement projects.
APA, Harvard, Vancouver, ISO, and other styles
7

S. Katageri, Ishwarappa, S. Anjan Gowda, Prashanth B.N, Mahesh Biradar, Rajeev M, and Rajesh S. Patil. "Prospects for Molecular Breeding in Cotton, Gossypium spp." In Plant Breeding - Current and Future Views [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.94613.

Full text
Abstract:
Conventional breeding interventions in cotton have been successful and these techniques have doubled the productivity of cotton, but it took around 40 years. One of the techniques of molecular biology i.e., genetic engineering has brought significant improvement in productivity within the year of introduction. With cotton genomics maturing, many reference genomes and related genomic resources have been developed. Newer wild species have been discovered and many countries are conserving genetic resources within and between species. This valuable germplasm can be exchanged among countries for increasing cotton productivity. As many as 249 Mapping and Association studies have been carried out and many QTLs have been discovered and it is high time for researchers to get into fine-mapping studies. Techniques of genomic selection hold valuable trust for deciphering quantitative traits like fiber quality and productivity since they take in to account all minor QTLs. There are just two studies involving genomic selection in cotton, underlining its huge prospects in cotton research. Genome editing and transformation techniques have been widely used in cotton with as many as 65 events being developed across various characters, and eight studies carried out using crisper technology. These promising technologies have huge prospects for cotton production sustainability.
APA, Harvard, Vancouver, ISO, and other styles
8

Epstein, Irving R., and John A. Pojman. "Delays and Differential Delay Equations." In An Introduction to Nonlinear Chemical Dynamics. Oxford University Press, 1998. http://dx.doi.org/10.1093/oso/9780195096705.003.0016.

Full text
Abstract:
Mathematically speaking, the most important tools used by the chemical kineticist to study chemical reactions like the ones we have been considering are sets of coupled, first-order, ordinary differential equations that describe the changes in time of the concentrations of species in the system, that is, the rate laws derived from the Law of Mass Action. In order to obtain equations of this type, one must make a number of key assumptions, some of which are usually explicit, others more hidden. We have treated only isothermal systems, thereby obtaining polynomial rate laws instead of the transcendental expressions that would result if the temperature were taken as a variable, a step that would be necessary if we were to consider thermochemical oscillators (Gray and Scott, 1990), for example, combustion reactions at metal surfaces. What is perhaps less obvious is that our equations constitute an average over quantum mechanical microstates, allowing us to employ a relatively small number of bulk concentrations as our dependent variables, rather than having to keep track of the populations of different states that react at different rates. Our treatment ignores fluctuations, so that we may utilize deterministic equations rather than a stochastic or a master equation formulation (Gardiner, 1990). Whenever we employ ordinary differential equations, we are making the approximation that the medium is well mixed, with all species uniformly distributed; any spatial gradients (and we see in several other chapters that these can play a key role) require the inclusion of diffusion terms and the use of partial differential equations. All of these assumptions or approximations are well known, and in all cases chemists have more elaborate techniques at their disposal for treating these effects more exactly, should that be desirable. Another, less widely appreciated idealization in chemical kinetics is that phenomena take place instantaneously—that a change in [A] at time t generates a change in [B] time t and not at some later time t + τ. On a microscopic level, it is clear that this state of affairs cannot hold.
APA, Harvard, Vancouver, ISO, and other styles
9

Minow, Martha. "School Choice and Choice Schools: Resisting, Realizing, or Replacing Brown?" In In Brown's Wake. Oxford University Press, 2010. http://dx.doi.org/10.1093/oso/9780195171525.003.0009.

Full text
Abstract:
To school desegregation activists in the 1960s, school choice plans represented one of a series of tactics of avoidance or obstruction. Yet choice programs became part of school desegregation remedies and then became initiatives for varied school reforms. Political alliances and clashes around the issue of school choice color public perceptions even more than the actual effects of school choice on students’ achievement or social integration. School choice can enable both self-segregation or student mixing across many lines of difference. As a tool of school reform, school choice continues to hold promise and risks for those seeking equality and integration within schools while enhancing pluralism and respect for differences in society as a whole. Yet some forms of school choice could undermine equality goals unless they are accompanied by direct efforts to maintain and enforce these goals. Widespread perceptions that American schools are failing have fueled a major nationwide movement for school reform since the early 1980s. At the forefront have been business leaders who—worried about American competitiveness and the qualifications of the workforce for jobs requiring increasing technical skills—have brought conceptions of competition and innovation to the school reform initiatives. Parents and teachers, seeking greater control of local schools, have also energized the movement. Challenging established school bureaucracies and political arrangements, these reformers have pushed for performance standards, voucher systems to promote competition and consumer choices, site-based management, and other opportunities for innovation at the level of the individual school rather than the district or statewide system. One of the key themes pursued by a range of parents, teachers, business leaders, and other advocates as a motor for reform is parental choice. This concept combines a market-style consumer sovereignty idea with notions of personal liberty. School choice stimulates competition among providers, as parents look for benchmarks for assessing quality. As a result, states and localities have initiated institutional innovations. These include magnet and pilot schools, which draw students from an entire district by offering a special focus. Vouchers permit poor students to use public funds to pay tuition in private schools.
APA, Harvard, Vancouver, ISO, and other styles
10

McKnight, Rebecca, Jonathan Price, and John Geddes. "Reactions to stressful experiences." In Psychiatry. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198754008.003.0031.

Full text
Abstract:
In biological terms, stress literally means a force from the outside world acting upon an individual, and is a phenomenon we have all experienced. The term ‘stress’ was first used in the 1930s by the endocrin­ologist Hans Selye to describe the responses of la­boratory animals to various stimuli. Originally, Selye meant ‘stress’ to be the response of an organism to a perceived threat or ‘stressor’, but the term is now used to mean the stimulus rather than the response in some cases. When presented with a stressor of any type, everyone will produce a reaction to that stress, and this is a normal physiological event. However, if the reac­tion is prolonged, too intense, or atypical in some way, stress can become abnormal and cause problems. Stressful events, even when reacted to normally, are important contributors to the causes of many kinds of psychiatric disorder. In this chapter, we consider those psychiatric disorders that are specific reactions to stressful experiences. These may occur independently or alongside other psychiatric conditions and include: … ● acute stress reactions: short- term disorders after stressful events; ● post- traumatic stress disorder: a disorder following exceptionally severe stress; ● adjustment disorders: conditions occurring after a change in life circumstances; ● grief reactions: the normal and abnormal responses to bereavement; ● reactions to special kinds of acute stress: for example, traffic accidents, war, earthquakes, etc… For all these conditions, an identifiable stressor is a necessary but not always sufficient factor in its aetiology. GPs encounter the vast majority of patients with stress disorders who present to the health services, but all clinicians will see these patients in their clinical specialties. The reasons for this are threefold: … 1 Acute physical illness and its treatment are stressful. 2 Chronic illness or disability can result in substantial changes in life circumstances. 3 Clinicians treat people involved in other kinds of stressful experiences…. Everyone reacts to stress differently, and what consti­tutes a stressful event is therefore highly subjective. However, there are certain situations that are likely to be experienced as stressful by anyone. The Holmes and Rahe Stress Scale is a list of 43 life events which predispose to stress- related illnesses, weighted ac­cording to their respective probability of doing so.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Special tool holder"

1

Landgrebe, Dirk, Matthias Demmler, Andre Albert, Frank Schieck, and Martin Weber. "Technology Development and Tool Concepts for High-Temperature Forming of Titanium." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86660.

Full text
Abstract:
Due to its excellent material properties, titanium is an important structural material for several application fields in the aerospace industry, the chemical industry, medical engineering or marine technologies. Especially its excellent weight-strength ratio, high-temperature strength corrosion resistance and not least its biocompatibility enables a wide field of special applications. These properties can be improved by alloying of other chemical elements. Despite good availability of resources and moderate world market prices, there is only a limited application range for titanium. Main reaso
APA, Harvard, Vancouver, ISO, and other styles
2

Jacobson, Douglas, Barry Fussell, and Robert Jerard. "Tool Runout Estimation Using Feed Force Spectral Components." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21131.

Full text
Abstract:
Cutter Runout is the eccentricity caused by a combination of imperfections in the cutting tool, tool holder, and spindle. While magnitudes of cutter runout are generally small (e.g 10 μm), the effect is noticeable in high tolerance finishing operations, and can cause significant variations in the force experienced on a multi tooth cutter. The goal of this research is to design and evaluate an indirect runout estimation method, using feed force components at the spindle and tooth passing frequency. The accuracy of the method is evaluated for a range of cutting conditions for 4 and 6 tooth helic
APA, Harvard, Vancouver, ISO, and other styles
3

Heer, Gurpreet Singh. "Design and Fabrication of Square Hole Drill Machine." In ASME 2007 2nd Frontiers in Biomedical Devices Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/biomed2007-38015.

Full text
Abstract:
Hole serves various purposes in any machine element. These holes may be round, square, rectangular or any other shape depending on the requirement. For round holes, the machines are available in the market. But for square or any other type of holes, the Methods presently used are broaching, electrode-discharge machine (E.D.M.), electro-chemical machine. These are very expensive and require special tools or machines.
APA, Harvard, Vancouver, ISO, and other styles
4

Tang, Ying, and Yuan Ji. "Study on Tool Wear and Vibration Characteristics in Micro Drilling Operation." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84071.

Full text
Abstract:
This paper presents studies on micro drilling operation, which refers to manufacturing of micro-holes with diameters less than 0.5 mm. Wear process of micro drill and its influence on machined hole quality and vibration characteristics in micro drilling operation were investigated through extensive experimentation with 0.29mm diameter twists drills drilling into plain carbon steel. Vibration signals collected from the micro drilling experiments were analyzed using time and frequency techniques. Characteristic parameters of vibration signatures: statistical measures of the time domain and avera
APA, Harvard, Vancouver, ISO, and other styles
5

Zopf, Philipp, and Franz Haas. "Analysis of the Cutting Force With Ultrasonic Assisted Manufacturing of Steel (S235JR)." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71238.

Full text
Abstract:
The manufacturing of hard and refractory materials such as ceramics, glass or carbide poses particular challenges on tools and machines. The Sauer Limited a company of the DMG Mori Corporation has developed ultrasonic tool holders working in a frequency range from 15 to 60 kHz. The ultrasonic vibrations are superimposing the tool movement in the tool axis especially for the application on special materials. This technique causes a structural weakening in the contact area and facilitates the machining. For these special materials, a force reduction, mainly in drilling into carbide with diamond
APA, Harvard, Vancouver, ISO, and other styles
6

He, L. "Block-Spectral Approach to Film-Cooling Modeling." In ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-22188.

Full text
Abstract:
Gas turbines performance improvement requires efficient and accurate prediction tools for film-cooling of high pressure turbine blades. Use of computational fluid dynamics in the cooling design faces a challenge due to a wide range of length scales to be resolved. The difficulty is also seriously compounded by the basic feature that each blade has a large number of cooling holes. In the present paper, a new spectral approach is proposed to address this modeling difficulty. The motivation is to resolve the aerothermal flow field and mixing process of film-cooling by the numerical solution to th
APA, Harvard, Vancouver, ISO, and other styles
7

Meshreki, M., A. Damir, A. Sadek, and M. H. Attia. "Investigation of Drilling of CFRP-Aluminum Stacks Under Different Cooling Modes." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67039.

Full text
Abstract:
Drilling of stacks poses great challenges due the heterogeneity and abrasiveness of the composites, the chip evacuation through the stack, in addition to the difference in properties between the metallic and the composite materials. The objective of this paper is to investigate the effect of drilling conditions such as tool material and geometry and lubrication mode on the hole quality as well as the tool wear in drilling of composite stacks (Carbon Fiber Reinforced Plastics CFRP-Aluminum). The thickness of each material was 19 mm. A 2-flute uncoated drill was used. Four different cooling mode
APA, Harvard, Vancouver, ISO, and other styles
8

Pellerin, Denis, Alaide M. Dura˜o, Jose´ E. F. P. Jardim, Carlos Pimenta, and Kazumi Miura. "Horizontal Directional Drilling as a Solution for Crossing of Ridges in the Serrana Province, Mato Grosso, Brazil." In 2002 4th International Pipeline Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/ipc2002-27190.

Full text
Abstract:
The crossing of a series of high, parallel, elongated and with steep scarp mountains in the Serrana Province, between Ca´ceres and Cuiaba´, Mato Grosso State, Brazil, constituted a great technical challenge for implementation of the Bolivia - Mato Grosso gas pipeline. Due to environmental preservation, the gas pipeline could not cross the crest of some of these mountains using conventional surface methods and the alternative of surrounding the mountains would have caused an extended additional path, with appreciable additional cost. The economically viable alternative was the horizontal direct
APA, Harvard, Vancouver, ISO, and other styles
9

Daiyin, Yin, Hu Shaobin, Yang Shuren, and Wei Yonghong. "Development and Application of Down-hole Tool Virtual Laboratory of Petroleum Engineering Specialty." In 2010 International Conference on E-Business and E-Government (ICEE). IEEE, 2010. http://dx.doi.org/10.1109/icee.2010.1355.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Garg, Vijay K., and Raymond E. Gaugler. "Prediction of Film Cooling on Gas Turbine Airfoils." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-016.

Full text
Abstract:
A three-dimensional Navier-Stokes analysis tool has been developed In order to study the effect of film cooling on the flow and heat transfer characteristics of actual turbine airfoils. An existing code (Amone et al., 1991) has been modified for the purpose. The code is an explicit, multigrid, ceil-centered, finite volume code with an algebraic turbulence model. Eigenvalue scaled artificial dissipation and variable-coefficient implicit residual smoothing are used with a full-multigrid technique. Moreover, Mayle’s transition criterion (Mayle, 1991) is used. The effects of film cooling have been
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Special tool holder"

1

Wright, Kirsten. Collecting Plant Phenology Data In Imperiled Oregon White Oak Ecosystems: Analysis and Recommendations for Metro. Portland State University, 2020. http://dx.doi.org/10.15760/mem.64.

Full text
Abstract:
Highly imperiled Oregon white oak ecosystems are a regional conservation priority of numerous organizations, including Oregon Metro, a regional government serving over one million people in the Portland area. Previously dominant systems in the Pacific Northwest, upland prairie and oak woodlands are now experiencing significant threat, with only 2% remaining in the Willamette Valley in small fragments (Hulse et al. 2002). These fragments are of high conservation value because of the rich biodiversity they support, including rare and endemic species, such as Delphinium leucophaeum (Oregon Depart
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Special tool holder' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography