Relevant bibliographies by topics / Speed of erythrocytes deposition

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Speed of erythrocytes deposition'

Author: Grafiati
Published: 4 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Speed of erythrocytes deposition.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Speed of erythrocytes deposition"

1

Falih, Hayder Yousif, and Kawthar H. Msayer. "Evaluation of the effect of the helium-neon laser (632.8 nm) on erythrocyte sedimentation rate (ESR) and packed cell volume (PCV)." Samarra Journal of Pure and Applied Science 5, no. 4 (2023): 127–39. http://dx.doi.org/10.54153/sjpas.2023.v5i4.637.

Full text
Abstract:
Erythrocyte aggregation is considering an essential physiological phenomenon in blood circulation, the interaction of lasers with biomaterials like blood is a crucial topic of study. It is a fundamental property of healthy blood that is crucial to the cardiovascular system. Evaluation of the vital processes of blood microscopically and in laboratory by examining the packed cell volume and erythrocyte sedimentation rate upon exposure to laser radiation for three different times. The study included 15 healthy people. Microscopic examination, packed cell volume and erythrocyte sedimentation rate
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Jie, David T. Glover, Alexander J. Szalai, Susan K. Hollingshead, and David E. Briles. "PspA and PspC Minimize Immune Adherence and Transfer of Pneumococci from Erythrocytes to Macrophages through Their Effects on Complement Activation." Infection and Immunity 75, no. 12 (2007): 5877–85. http://dx.doi.org/10.1128/iai.00839-07.

Full text
Abstract:
ABSTRACT Pneumococcal surface protein A (PspA) and PspC are important virulence factors. Their absence has been shown to allow improved clearance of pneumococci from the blood of mice and to decrease pneumococcal virulence. In the presence of antibody and complement, pneumococci attach to erythrocytes in a process called immune adherence (IA), which facilitates their delivery to, and eventual phagocytosis by, macrophages. It is not known, however, if PspA and PspC affect IA. Using PspA and/or PspC isogenic mutants and complement-deficient mouse sera, we demonstrated that absence of PspA allows
APA, Harvard, Vancouver, ISO, and other styles
3

Sybirna, N. O., M. Ya Lyuta, and N. I. Klymyshyn. "Molecular mechanisms of nitric oxide deposition in erythrocytes." Studia Biologica 4, no. 1 (2010): 143–60. http://dx.doi.org/10.30970/sbi.0401.080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hasanah, Muslimah Uswatun, and Puspitasari Puspitasari. "The Effect Of Centrifugation Speed On The Results Of Urine Sediment Examination." Medicra (Journal of Medical Laboratory Science/Technology) 5, no. 2 (2022): 104–8. http://dx.doi.org/10.21070/medicra.v5i2.1668.

Full text
Abstract:
The process of centrifugation in urine examination is very important because it can be used in the manufacture of urine sediment. The purpose of this study was to determine the effect of centrifugation speed on the results of urine sediment examination. Centrifugation speeds used were 3000 rpm, 3500 rpm, 4000 rpm, and 4500 rpm using pathological urine samples. The samples used were 32. The research method used was an experimental laboratory at the Pusura Yos Sudarso clinical laboratory in Surabaya. The results of the study with a speed of 3000 rpm obtained an average of erythrocytes = 6.63/LPB
APA, Harvard, Vancouver, ISO, and other styles
5

DeLoach, JR, K. Andrews, and CL Sheffield. "Encapsulation of interleukin‐2 in murine erythrocytes and subsequent deposition in mice receiving a subcutaneous injection." Biotechnology and Applied Biochemistry 10, no. 2 (1988): 183–90. http://dx.doi.org/10.1111/j.1470-8744.1988.tb00013.x.

Full text
Abstract:
Radiolabeled recombinant human interleukin‐2 (IL‐2) was successfully encapsulated in both mouse and sheep erythrocytes. Of the added IL‐2, 70% was recovered bound to or encapsulated within the carrier cells. Erythrocytes containing IL‐2 were stable in vitro and most of the IL‐2 remained associated with the cells following a 16‐h incubation at 37 degrees C. When carrier erythrocytes containing IL‐2 were injected subcutaneously into mice, intact [35S]IL‐2 was detectable in a number of tissues 3 days after injection.
APA, Harvard, Vancouver, ISO, and other styles
6

Böhm, Elsa Wilma, Maria Pavlaki, Georgios Chalikias, et al. "Colocalization of Erythrocytes and Vascular Calcification in Human Atherosclerosis: A Systematic Histomorphometric Analysis." TH Open 05, no. 02 (2021): e113-e124. http://dx.doi.org/10.1055/s-0041-1725042.

Full text
Abstract:
Abstract Background Intimal calcification typically develops in advanced atherosclerosis, and microcalcification may promote plaque progression and instability. Conversely, intraplaque hemorrhage and erythrocyte extravasation may stimulate osteoblastic differentiation and intralesional calcium phosphate deposition. The presence of erythrocytes and their main cellular components (membranes, hemoglobin, and iron) and colocalization with calcification has never been systematically studied. Methods and Results We examined three types of diseased vascular tissue specimens, namely, degenerative aort
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Jie, Alexander J. Szalai, Susan K. Hollingshead, Moon H. Nahm, and David E. Briles. "Antibody to the Type 3 Capsule Facilitates Immune Adherence of Pneumococci to Erythrocytes and Augments Their Transfer to Macrophages." Infection and Immunity 77, no. 1 (2008): 464–71. http://dx.doi.org/10.1128/iai.00892-08.

Full text
Abstract:
ABSTRACT Streptococcus pneumoniae has been shown to bind to erythrocytes via a process called immune adherence. This adherence and the subsequent transfer of pneumococci from erythrocytes to macrophages are both dependent on complement C3 deposition onto the pneumococcal surface. The observation that anti-capsule antibody increases C3 deposition on the pneumococcal capsule indicated that anti-capsule antibody may also facilitate the clearance of pneumococci through immune adherence. Using pneumococcal strain WU2 (capsule type 3) and its nonencapsulated mutant JD908, we found that monoclonal an
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Satish, Sumanta Acharya, and Roger Beuerman. "Deposition of Particles on Ocular Tissues and Formation of Krukenberg Spindle, Hyphema, and Hypopyon." Journal of Biomechanical Engineering 129, no. 2 (2006): 174–86. http://dx.doi.org/10.1115/1.2472380.

Full text
Abstract:
Eye diseases, such as Krukenberg’s spindle, hyphema, and hypopyon, are related to the deposition of specific particles such as pigmentary cells, leukocytes, and erythrocytes. These particles are circulated by the aqueous humor (AH) and tend to deposit in regions of low velocities or high resistance. In the present paper, numerical simulations are reported of the AH flow and particle transport, and the particle concentration predictions are qualitatively compared to clinical images. The particle concentration distributions provide an understanding of the likely sources of deposition and the ori
APA, Harvard, Vancouver, ISO, and other styles
9

Fazio, Francesco, Marina Basova, and Osman Sabri Kesbiç. "Anthropogenic Pollution-Induced Stress: Catecholamine Deposition in Erythrocytes of Scorpaena porcus Linnaeus 1758." Croatian Journal of Fisheries 82, no. 3 (2024): 85–90. http://dx.doi.org/10.2478/cjf-2024-0011.

Full text
Abstract:
Abstract The sympathoadrenal system plays an essential role in forming the body’s response to the action of stimuli of various natures and intensities. The content of deposited catecholamines in peripheral blood erythrocytes is one of the most accessible parameters for an adequate description of the functional activity of the sympathoadrenal system in humans and rats. The aim of the work is to assess the accumulation of catecholamines in erythrocytes of sea ruffs Scorpaena porcus L. at various pollution levels in the bays of Sevastopol. The phenomenon of accumulation of catecholamines in eryth
APA, Harvard, Vancouver, ISO, and other styles
10

Risitano, Antonio M., Patrizia Ricci, Caterina Pascariello, et al. "Novel Complement Modulators for Paroxysmal Nocturnal Hemoglobinuria: Peptide and Protein Inhibitors of C3 Convertase Prevent Both Surface C3 Deposition and Subsequent Hemolysis of Affected Erythrocytes in Vitro." Blood 120, no. 21 (2012): 370. http://dx.doi.org/10.1182/blood.v120.21.370.370.

Full text
Abstract:
Abstract Abstract 370 Paroxysmal nocturnal hemoglobinuria (PNH) is a complex hematological disorder characterized by the expansion of blood cells deficient in the surface complement inhibitors CD55 and CD59; affected erythrocytes suffer from uncontrolled complement activation on their surface, and subsequent membrane attack complex (MAC)-mediated intravascular hemolysis. The anti-C5 antibody eculizumab has proven effective in controlling intravascular hemolysis in vivo, leading to remarkable clinical benefit in almost all PNH patients. Yet, we have demonstrated that persistent C3 activation oc
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Speed of erythrocytes deposition"

1

MacMeccan, Robert Miles III. "Mechanistic Effects of Erythrocytes on Platelet Deposition in Coronary Thrombosis." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19786.

Full text
Abstract:
A new lattice-Boltzmann finite-element method is used to simulate large numbers of deformable red blood cells and platelets in suspension for the investigation of stress-mediated platelet-deposition mechanisms in blood. The coupled lattice-Boltzmann finite-element method provides the novel ability to simulate hundreds of realistic and deformable red blood cells and produce continuum-scale physics at physiologic hematocrit and low arterial-shear rates. The new method is developed and shown to produce single red blood cell deformation consistent with experimental results in flow chambers. Simu
APA, Harvard, Vancouver, ISO, and other styles
2

Lyyränen, Jussi. "Particle formation, deposition, and particle induced corrosion in large-scale medium-speed diesel engines /." Espoo VTT, 2006. http://www.vtt.fi/inf/pdf/publications/2006/P598.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Welters, Martin [Verfasser]. "Potenzial der High-Speed Physical Vapour Deposition Technologie zur Abscheidung oxidischer Werkzeugbeschichtungen / Martin Welters." Düren : Shaker, 2021. http://d-nb.info/1233547852/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rohweder, Matthew Flynn. "A numerical investigation of flowfield modification in high-speed airbreathing inlets using energy deposition." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2010. http://scholarsmine.mst.edu/thesis/pdf/Rohweder_09007dcc80722a47.pdf.

Full text
Abstract:
Thesis (M.S.)--Missouri University of Science and Technology, 2010.<br>Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed Jan. 5, 2010). Includes bibliographical references (p. 52-53).
APA, Harvard, Vancouver, ISO, and other styles
5

Lundberg, Olle. "Band Gap Profiling and High Speed Deposition of Cu(In,Ga)Se2 for Thin Film Solar Cells." Doctoral thesis, Uppsala universitet, Fasta tillståndets elektronik, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3757.

Full text
Abstract:
The Cu(In,Ga)Se2-based thin film solar cell is a promising candidate for becoming one of the more important solar cell technologies in the near future. In order to realize such a development a significant reduced production cost of the Cu(In,Ga)Se2 (CIGS) layer is needed. This work shows a possible way towards such a reduction by increasing the deposition rate and decreasing the CIGS thickness with almost maintained device efficiency. Obtaining an improved device performance in CIGS-based solar cells by using an in-depth variation of the band gap has earlier been investigated without any clear
APA, Harvard, Vancouver, ISO, and other styles
6

Lundberg, Olle. "Band gap profiling and high speed deposition of Cu(In,Ga)Se₂ for thin film solar cells /." Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-3757.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lu, Peng. "Sublimation growth of ALN bulk crystals and high-speed CVD growth of SiC epilayers, and their characterization." Diss., Manhattan, Kan. : Kansas State University, 2006. http://hdl.handle.net/2097/242.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Holzer, Achill, Stephan Koß, Gunnar Matthiesen, et al. "Tribological investigations on additively manufactured surfaces using extreme high-speed laser material deposition (ehla) and laser powder bed fusion (LPBF)." Technische Universität Dresden, 2020. https://tud.qucosa.de/id/qucosa%3A71080.

Full text
Abstract:
Today's economic and ecological directives demand for highly sustainable machine parts by low production cost and energy consumption. Consequently, it is crucial to guarantee a long service life by protecting all components against wear and corrosion. However, hydraulic components always include stressed surfaces, which suffer from heavy loads at high relative speeds. To prevent fretting, coating processes like thermal spraying or hard chrome have a long history in the field of hydraulics. New additive laser-based processes like EHLA and LPBF offer the potential to apply new coatings without e
APA, Harvard, Vancouver, ISO, and other styles
9

Ten, Jyi Sheuan. "High speed mask-less laser-controlled precision micro-additive manufacture." Thesis, University of Cambridge, 2019. https://www.repository.cam.ac.uk/handle/1810/285409.

Full text
Abstract:
A rapid, mask-less deposition technique for writing metal tracks has been developed. The technique was based on laser-induced chemical vapour deposition. The novelty in the technique was the usage of pulsed ultrafast lasers instead of continuous wave lasers in pyrolytic dissociation of the chemical precursor. The motivation of the study was that (1) ultrafast laser pulses have smaller heat affected zones thus the deposition resolution would be higher, (2) the ultrashort pulses are absorbed in most materials (including those transparent to the continuous wave light at the same wavelength) thus
APA, Harvard, Vancouver, ISO, and other styles
10

Davies, D. R. G. "Centrifugal spray deposition (CSD) : a process for making high speed steel and other preforms for hot working into rings and various shapes." Thesis, Swansea University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Speed of erythrocytes deposition"

1

McLean, Steven. Chemical vapour deposition of titanium carbide on low alloy high speed steel. University of Birmingham, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lyyränen, Jussi. Particle formation, deposition, and particle induced corrosion in large-scale medium-speed diesel engines. VTT Technical Research Centre of Finland, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Knight, Doyle D. Energy Deposition for High-Speed Flow Control. Cambridge University Press, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Knight, Doyle D. Energy Deposition for High-Speed Flow Control. Cambridge University Press, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hong, M. H. Laser applications in nanotechnology. Edited by A. V. Narlikar and Y. Y. Fu. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533060.013.24.

Full text
Abstract:
This article discusses a variety of laser applications in nanotechnology. The laser has proven to be one of many mature and reliable manufacturing tools, with applications in modern industries, from surface cleaning to thin-film deposition. Laser nanoengineering has several advantages over electron-beam and focused ion beam processing. For example, it is a low-cost, high-speed process in air, vacuum or chemical environments and also has the capability to fulfill flexible integration control. This article considers laser nanotechnology in the following areas: pulsed laser ablation for nanomater
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Speed of erythrocytes deposition"

1

Schopphoven, Thomas. "Extreme High-Speed Laser Material Deposition—EHLA." In Tailored Light 2. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-98323-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kimura, Teiichi, and Takashi Goto. "High Speed Deposition of YSZ Films by Laser Chemical Vapor Deposition." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144114.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Giebeler, C., J. J. M. Ruigrok, and J. B. A. van Zon. "Single deposition GMR sensors for rotational speed sensing." In Transducers ’01 Eurosensors XV. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ebner, R., K. Rabitsch, B. Kriszt, and B. Major. "Carbide and Boride Laser Alloying of High Speed Steels." In Laser Processing: Surface Treatment and Film Deposition. Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-0197-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Goto, Takashi, Teiichi Kimura, and Rong Tu. "High-Speed Engineering Ceramic Coating by Laser Chemical Vapor Deposition." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470640845.ch52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Akedo, J., and M. Lebedev. "Aerosol Deposition for Fabrication of High Speed Optical Micro-Scanner." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408162.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Goto, Takashi. "Laser CVD Process for High Speed Deposition of YSZ Films." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.1213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wexel, Helena, Patrick Fischmann, Kai Drechsel, and Frederik Zanger. "Influence of Particle Size Distribution in High-Speed Directed Energy Deposition." In Lecture Notes in Production Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-86893-1_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cazaubon, Valentine, Audrey Abi Akle, and Xavier Fischer. "A Parametric Study of Additive Manufacturing Process: TA6V Laser Wire Metal Deposition." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_4.

Full text
Abstract:
AbstractAdditive Manufacturing has proven to be an economically and industrially attractive process in building or repairing parts. However, the major issue of this new process is to guarantee a mechanical behavior identical to the subtractive manufacturing methodologies. The work, presented in this paper, is centered on the Laser Wire Metal Deposition (LMD-w) method with the metallic alloy TA6V. Its working principle is to fuse a coaxial wire on a substrate with a laser as a heat source. To better understand the interaction between the input parameters (Laser Power, Wire Feed Speed and Tool S
APA, Harvard, Vancouver, ISO, and other styles
10

Golovin, P. A., A. M. Vildanov, and K. D. Babkin. "Optimization of High-Speed Direct Laser Deposition Regime Parameters in Titanium Blades Production." In Proceedings of the 4th International Conference on Industrial Engineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_268.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Speed of erythrocytes deposition"

1

Dworak, Adam, Piotr Koruba, Jaroslaw Sienicki, and Piotr Jurewicz. "Application of Ultra High Speed Laser Cladding Technology for Functional Coatings Deposition." In Vertical Flight Society 74th Annual Forum & Technology Display. The Vertical Flight Society, 2018. http://dx.doi.org/10.4050/f-0074-2018-12807.

Full text
Abstract:
The technology of high speed laser deposition is a development of the method of applying functional coatings using a laser beam. It is characterized by high surfacing speeds, allowing high cooling rates, little mixing with the substrate, which leads to a high purity of the padding material and an increase in the properties of the applied layer compared to conventional laser welding. This paper presents a description of the technology of high speed laser deposition in an application for the aviation industry. The prepared stand for the implementation of the process and its verification on the a
APA, Harvard, Vancouver, ISO, and other styles
2

Holopainen, Jani, Abhishekkumar Thakur, Adriana Szeghalmi, Stephan Mingels, and Harro Hagedorn. "High Speed Atomic Layer Deposition of Broadband Antireflection Coatings based on Nanoporous Alumina." In Optical Interference Coatings. Optica Publishing Group, 2025. https://doi.org/10.1364/oic.2025.thc.3.

Full text
Abstract:
Spatial ALD and hot water treatment to nanoporous alumina were used to prepare a broadband antireflection coating. High deposition rate and low average reflection below 0.01% in the visible range were achieved.
APA, Harvard, Vancouver, ISO, and other styles
3

El-Sharif, M., S. Ma, and C. U. Chisholm. "Studies on the Structure and Corrosion Properties of Chromium Coatings Produced by High Speed Plating." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95595.

Full text
Abstract:
Abstract A high speed electrodeposition process has been developed and employed to deposit hard chromium at high rate of deposition (300 µm/hr) from chromium (III) electrolyte. The deposit's quality, structure, microhardness and corrosion properties has been examined and related to the prevailing, hydrodynamic conditions of deposition. X-ray diffraction show that the as-deposited chromium to be microcrystallin. The microhardness, corrosion properties and the structural changes which takes place during heat treatment are also presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Vahedi, Azadeh, Thomas W. Coyle, and Javad Mostaghimi. "A Novel Advanced Photocatalytic Coatings of TiO2-Fe3O4 Graphene Oxide via Aerosol Deposition." In ITSC 2025. ASM International, 2025. https://doi.org/10.31399/asm.cp.itsc2025p0500.

Full text
Abstract:
Abstract In this study, we explore the optimization of aerosol deposition parameters to achieve novel TiO?-Fe?O? graphene oxide composite coatings. Our approach focused on systematically evaluating deposition parameters, including chamber pressure, number of passes, gas flow rate, and sample holder speed, to optimize coating performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Kumar, Satish, Sumanta Acharya, and Roger Beurman. "Deposition of Particles on Ocular Tissues and Formation of Krukenberg Spindle, Hyphema and Hypopyon." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61660.

Full text
Abstract:
Eye diseases such as Krukenberg Spindle, Hyphema and Hypopyon are related to the deposition of specific particles such as pigmentary cells, leukocytes and erythrocytes. These particles are circulated by the aqueous humor (AH), and tend to deposit in regions of low velocities or high resistance. In the present paper, numerical simulations are reported of the AH flow and particle transport, and the particle concentration predictions are qualitatively compared with clinical images. The particle concentration distributions provide an understanding of the likely sources of deposition, and the origi
APA, Harvard, Vancouver, ISO, and other styles
6

Witke, Thomas, Peter Siemroth, Thomas Schuelke, B. Schultrich, and Emil Ott. "Short-time investigation of deposition processes." In High-Speed Photography and Photonics: 21st International Congress, edited by Ung Kim, Joon-Sung Chang, and Seung-Han Park. SPIE, 1995. http://dx.doi.org/10.1117/12.209567.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Southwell, W. H., and W. J. Gunning. "High-Speed Ellipsometer For Thin-Film Deposition Monitoring." In 1988 International Congress on Optical Science and Engineering, edited by Karl H. Guenther and Hans K. Pulker. SPIE, 1989. http://dx.doi.org/10.1117/12.950021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kolesnichenko, Yuri, Doyle Knight, Vadim Brovkin, and Dmitri Khmara. "High Speed Flow Control Using Microwave Energy Deposition." In 46th AIAA Aerospace Sciences Meeting and Exhibit. American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-1354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Danzuka, Toshio, Hiroshi Yokota, and Ichiro Tsuchiya. "High-speed deposition of graded-Index fiber by the multiflame vapor axial deposition method." In Optical Fiber Communication Conference. OSA, 1985. http://dx.doi.org/10.1364/ofc.1985.mf5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Koß, S., S. Vogt, M. Göbel, and J. H. Schleifenbaum. "Coating of Aluminium with High Deposition Rates Through Extreme High-Speed Laser Material Deposition." In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0701.

Full text
Abstract:
Abstract In the past few years, the Extreme High-Speed Laser Material Deposition (EHLA) process has been used as a coating technology alongside conventional processes due to its unique process characteristics and is an economical and sustainable alternative to traditional technologies. The essential characteristic of the process is that the main energy is absorbed by the powder particles so that they reach the substrate surface in a molten state. Thereby, metallurgically bonded and dense wear and corrosion protection coatings are generated. This leads to significantly higher surface and deposi
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Speed of erythrocytes deposition"

1

Jones. L51751 Evaluation of Low Hydrogen Welding Processes for Pipeline Construction in High Strength Steel. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0010220.

Full text
Abstract:
As the use of higher strength and thicker walled pipe becomes more prevalent, the procedures that would normally guard against hydrogen cracking when welding with cellulosic electrodes, become less effective and it has become necessary to investigate the use of alternative low hydrogen consumables. Low hydrogen manual welding processes, suitable for pipeline girth welding, have been available for some time for the lower strength pipe grades, and latterly, for high strength pipelines (up to and including X80). Despite their availability and advantages in terms of reduced crack susceptibility, t
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Speed of erythrocytes deposition' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography