Relevant bibliographies by topics / Stainless Austenitic Steels

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Stainless Austenitic Steels'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stainless Austenitic Steels.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Stainless Austenitic Steels"

1

Antoine, P., B. Soenen, and Nuri Akdut. "Static Strain Aging in Cold Rolled Metastable Austenitic Stainless Steels." Materials Science Forum 539-543 (March 2007): 4891–96. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.4891.

Full text
Abstract:
Transformation of austenite to martensite during cold rolling operations is widely used to strengthen metastable austenitic stainless steel grades. Static strain aging (SSA) phenomena at low temperature, typically between 200°C and 400°C, can be used for additional increase in yield strength due to the presence of α’-martensite in the cold rolled metastable austenitic stainless steels. Indeed, SSA in austenitic stainless steel affects mainly in α’-martensite. The SSA response of three industrial stainless steel grades was investigated in order to understand the aspects of the aging phenomena a
APA, Harvard, Vancouver, ISO, and other styles
2

Itman Filho, André, Wandercleiton da Silva Cardoso, Leonardo Cabral Gontijo, Rosana Vilarim da Silva, and Luiz Carlos Casteletti. "Austenitic-ferritic stainless steel containing niobium." Rem: Revista Escola de Minas 66, no. 4 (2013): 467–71. http://dx.doi.org/10.1590/s0370-44672013000400010.

Full text
Abstract:
The austenitic-ferritic stainless steels present a better combination of mechanical properties and stress corrosion resistance than the ferritic or austenitic ones. The microstructures of these steels depend on the chemical compositions and heat treatments. In these steels, solidification starts at about 1450ºC with the formation of ferrite, austenite at about 1300ºC and sigma phase in the range of 600 to 950ºC.The latter undertakes the corrosion resistance and the toughness of these steels. According to literature, niobium has a great influence in the transformation phase of austenitic-ferrit
APA, Harvard, Vancouver, ISO, and other styles
3

Gontijo, L. C., R. Machado, L. C. Casteletti, S. E. Kuri, and Pedro A. P. Nascente. "Study of the S Phases Formed on Plasma-Nitrided Austenitic and Ferritic Stainless Steels." Materials Science Forum 638-642 (January 2010): 775–80. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.775.

Full text
Abstract:
An expanded austenite layer is formed on the surfaces of austenitic stainless steels that are nitrided under low-temperature plasma. This S phase is an iron alloy metastable phase supersaturated with nitrogen. We have identified a similar expanded ferrite or ferritic S phase for nitrided ferritic (BCC) stainless steels. Samples of austenitic AISI 304L and AISI 316L and ferritic AISI 409L stainless steels were plasma-nitrided at 350, 400, 450 and 500°C, and the structural and corrosion characteristics of the modified layers were analyzed by X-ray diffraction (XRD) and electrochemical tests. F
APA, Harvard, Vancouver, ISO, and other styles
4

Maznichevsky, Alexander N., Radii V. Sprikut, and Yuri N. Goikhenberg. "Investigation of Nitrogen Containing Austenitic Stainless Steel." Materials Science Forum 989 (May 2020): 152–59. http://dx.doi.org/10.4028/www.scientific.net/msf.989.152.

Full text
Abstract:
An important factor in solving the problem of stainless steel corrosion resistance is carbon concentration reduction. However, a decrease in carbon content of austenitic steels leads to a drop in level of their strength properties. Theoretically, nitrogen alloying can lead to a strength increase in all types of austenitic corrosion-resistant steels. Practically, nitrogen alloying is effectively only with low-carbon compositions. This work shows the effect of nitrogen on the mechanical properties of middle-alloying nitrogen, containing stainless steel, and a study of AISI 304L and pilot steel w
APA, Harvard, Vancouver, ISO, and other styles
5

Adachi, Shinichiro, Motoo Egawa, Takuto Yamaguchi, and Nobuhiro Ueda. "Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition." Coatings 10, no. 4 (2020): 365. http://dx.doi.org/10.3390/coatings10040365.

Full text
Abstract:
In this study, low-temperature plasma nitriding is applied to austenitic stainless steels at temperatures below 450 °C. This enhances the wear resistance of the steels with maintaining corrosion resistance, by producing expanded austenite (known as the S-phase), which dissolves excessive nitrogen. Austenitic stainless steels contain nickel, which has the potential to play an important role in the formation and properties of the S-phase. In this experiment, austenitic stainless steel layers with different nickel contents were processed using direct laser metal deposition, and subsequently treat
APA, Harvard, Vancouver, ISO, and other styles
6

Brytan, Z. "The corrosion resistance of laser surface alloyed stainless steels." Journal of Achievements in Materials and Manufacturing Engineering 2, no. 92 (2018): 49–59. http://dx.doi.org/10.5604/01.3001.0012.9662.

Full text
Abstract:
Purpose: of this paper was to examine the corrosion resistance of laser surface alloyed (LSA) stainless steels using electrochemical methods in 1M NaCl solution and 1M H2SO4 solution. The LSA conditions and alloying powder placement strategies on the material's corrosion resistance were evaluated. Design/methodology/approach: In the present work the sintered stainless steels of different microstructures (austenitic, ferritic and duplex) where laser surface alloyed (LSA) with elemental alloying powders (Cr, FeCr, Ni, FeNi) and hard powders (SiC, Si3N4) to obtain a complex steel microstructure o
APA, Harvard, Vancouver, ISO, and other styles
7

Ravi Kumar, B., J. K. Sahu, and S. K. Das. "Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation." Materials Science Forum 715-716 (April 2012): 334–39. http://dx.doi.org/10.4028/www.scientific.net/msf.715-716.334.

Full text
Abstract:
AISI 304L austenitic stainless steel was cold rolled to 90% with and no inter-pass cooling to produced 89% and 43% of deformation induced martensite respectively. The cold rolled specimens were annealed by isothermal and cyclic thermal process. The microstructures of the cold rolled and annealed specimens were studied by the electron microscope. The observed microstructural changes were correlated with the reversion mechanism of martensite to austenite and strain heterogeneity of the microstructure. The results indicated possibility of ultrafine austenite grain formation by cyclic thermal proc
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Zhuang, Di Wu, Wei Lv, Zhen Zheng, and Shao Pu Kang. "Investigations on Low Environmental Impact Machining Processes of Free Cutting Austenitic Stainless Steels." Applied Mechanics and Materials 377 (August 2013): 112–16. http://dx.doi.org/10.4028/www.scientific.net/amm.377.112.

Full text
Abstract:
In the present paper, sulfur, RE (rare earth) and bismuth were added to an austenite stainless steel. Low environmental impact machining processes of free cutting austenitic stainless steels was investigated by machinability testing. The results show that a significant amount of grey and dispersed inclusions were found in steel B. The inclusions are typical sulfide inclusions, and bismuth element is attached to double end of manganese sulfide inclusions. Some inclusions exhibit globular shape due to the presence of rare earths elements in steel B. Chip morphology was improved in steel B under
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Dong Sheng, Dan Li, Hong Dou, et al. "High-Temperature Oxidation Resistance of Austenitic Stainless Steels." Key Engineering Materials 575-576 (September 2013): 414–17. http://dx.doi.org/10.4028/www.scientific.net/kem.575-576.414.

Full text
Abstract:
The oxidation kinetic curves of four kinds of austenitic stainless steel at 700°C was measured by weighting method. It is showed that the oxidation curves of those austenitic stainless steels follow the parabolic law. The mass gain of 800Al steel. is the least of all. The surfacemorphology and structure of the oxide scale were studied by scanning electron microscopy and X-ray diffraction methods. It is found that adense oxide scale formed at 700°C in all four austenitic stainless steels. In austenitic stainless steel with high Mn content, scales are mainly composed of Mn2O3 and the spinel MnFe
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Zhuang, Di Wu, and Wei Lv. "Development of Pb-Free Austenitic Stainless Steels." Advanced Materials Research 791-793 (September 2013): 486–89. http://dx.doi.org/10.4028/www.scientific.net/amr.791-793.486.

Full text
Abstract:
Pb-free austenitic stainless steels were investigated by adding sulfur, rare earth (Re) elements and bismuth. The metallurgical properties, machinability and mechanical properties of both steels were examined. The results show that a significant amount of grey, spindle shaped inclusions were discovered in austenitic stainless steels, and they should belong to MnS inclusions containing bismuth element and rare earths oxide. The addition of S, Bi and Re to austenitic stainless steels improved the machinability. The machinability of steel B is better than that of steel A in a way. The mechanical
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Stainless Austenitic Steels"

1

Naraghi, Reza. "Martensitic Transformation in Austenitic Stainless Steels." Thesis, KTH, Metallografi, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-37214.

Full text
Abstract:
Martensitic transformation is very important in austenitic stainless steels where the transformation induced plasticity phenomenon provides a combination of good mechanical properties, such as formability and strength. However, the difficulty of predicting the material behaviour is one of the major drawbacks of these steels. In order to model this behaviour it is of great importance to be able to characterize the morphology, crystallography and the amount of different types of martensite. The morphology and crystallography of thermal and deformation induced lath martensite in stainless steels
APA, Harvard, Vancouver, ISO, and other styles
2

Stewart, John. "Pit initiation on austenitic stainless steels." Thesis, University of Southampton, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.277798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Street, Steven Richard. "Atmospheric corrosion of austenitic stainless steels." Thesis, University of Birmingham, 2017. http://etheses.bham.ac.uk//id/eprint/7390/.

Full text
Abstract:
Atmospheric corrosion was investigated using electrochemical and droplet studies. The effects of changes in bulk solution concentration and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \(in\) \(situ\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial passivation was observed to initiate locally and propagate across the corroding surface. This caused repassivation gradually rather than as a uniform event. In concentrated chl
APA, Harvard, Vancouver, ISO, and other styles
4

Kornegay, Cynthia E. "Impact fracture of austenitic stainless steels." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/50038.

Full text
Abstract:
Industry is constantly searching for improved materials for use in highly demanding applications. The materials chosen must withstand a wide range of temperatures and extended exposure in aggressive environments, including hydrogen gas. Because of the risk of catostrophe if brittle failure occurs, careful material selection is imperative. Austenitic stainless steels may be a likely choice for hydrogen service because their behavior in high pressure hydrogen ranges from no apparent damage to relevent, but generally small ductility loss (13). Because of this Variation in behavior, a s
APA, Harvard, Vancouver, ISO, and other styles
5

Hopkin, Gareth John. "Modelling anisothermal recrystallization in austenitic stainless steels." Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/221867.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sandström, Rolf, Muhammad Farooq, and Joanna Zurek. "Basic creep models for a 25Cr20NiNbN austenitic stainless steels." KTH, Materialteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-122155.

Full text
Abstract:
Basic models for solid solution and precipitation hardening during creep are presented for the austenitic stainless steels 25Cr20NiNbN (TP310HNbN, HR3C, DMV310N). The solid solution hardening is a result of the formation of Cottrell clouds of solutes around the dislocations. In addition to slowing down the creep, the solutes increase the activation energy for creep. The increase in activation energy corresponds to the maximum binding energy between the solutes and the dislocations. The formation of fine niobium nitrides during service enhances the creep strength. It is found that the nitrides
APA, Harvard, Vancouver, ISO, and other styles
7

Galloway, Alexander M. "The weldability of nitrogen enriched austenitic stainless steels (316LN)." Thesis, University of Strathclyde, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.423871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guo, Liya. "Atmospheric localised corrosion of type 304 austenitic stainless steels." Thesis, University of Birmingham, 2016. http://etheses.bham.ac.uk//id/eprint/6458/.

Full text
Abstract:
Atmospheric localised corrosion of stainless steel has been investigated under salt droplets containing a mixture of MgCl2 and NaCl between the deliquescence relative humidity of the two salts where there was precipitation of NaCl crystals. Dish-shaped pits and crevice-like attack could be observed. Effects of the change of relative humidity (RH) have been studied. A pit that has grown at 33% RH for 1 day will tend to repassivate when the RH is increased to 85% while pits grown at 33% RH for 3 weeks may not repassivate at 85% RH and can continue to grow when the RH is returned to 33%. A pit th
APA, Harvard, Vancouver, ISO, and other styles
9

Sourmail, Thomas. "Simultaneous precipitation reactions in creep-resistant austenitic stainless steels." Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/221868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Phan, Dan. "Atmospheric-Induced stress corrosion cracking of Austenitic Stainless Steels." Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.508598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Stainless Austenitic Steels"

1

Berns, Hans. High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-33701-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vafaei, Reza. The machinability of austenitic stainless steels. University of Birmingham, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Xiaoying. Charcterisation of low temperature plasma nitrided austenitic stainless steels. University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Leinonen, Jouko. Cast-To-Cast Variations In Weld Penetration In Austenitic Stainless Steels. University of Oulu, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

McIntyre, Dale R. Experience survey: Stress corrosion cracking of austenitic stainless steels in water. MTI International, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ver Matrix 4: Resurrecciones | Película Completa [2021] En Español Latino. High manganese austenitic steels: Proceedings of a Conference on Manganese Containing Stainless Steels, held in conjunction with ASM's Materials Week '87, Cincinnati, Ohio, 10-15 October 1987. ASM International, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

International Conference, Duplex Stainless Steels (4th 1994 Glasgow, Scotland). Papers presented at the fourth International Conference, Duplex Stainless Steels: Glasgow, Scotland, 13-16 November, 1994. Abington Publishing, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Engineers, National Association of Corrosion. Protection od austenitic stainless steels and other austenitic alloysfrom polythionic acid stress corosion cracking during shutdown of refinery equipment. NACE, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Keisler, J. Fatigue strain-life behavior of carbon and low-alloy steels, austenitic stainless steels, and alloy 600 in LWR environments. U.S. Nuclear Regulatory Commission, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Stainless Austenitic Steels"

1

Chai, Guocai, Jan-Olof Nilsson, Magnus Boström, Jan Högberg, and Urban Forsberg. "Advanced Heat Resistant Austenitic Stainless Steels." In Advanced Steels. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17665-4_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Introduction." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Constitution." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Structure." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Properties." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Manufacture." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Berns, Hans, Valentin Gavriljuk, and Sascha Riedner. "Assessment." In High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33701-7_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Streicher, M. A., and J. F. Grubb. "Austenitic and Ferritic Stainless Steels." In Uhlig's Corrosion Handbook. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9780470872864.ch51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Folkhard, Erich. "Welding Metallurgy of Austenitic Stainless Steels." In Welding Metallurgy of Stainless Steels. Springer Vienna, 1988. http://dx.doi.org/10.1007/978-3-7091-8965-8_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Folkhard, Erich. "Welding Metallurgy of Austenitic-Ferritic Dissimilar Joints." In Welding Metallurgy of Stainless Steels. Springer Vienna, 1988. http://dx.doi.org/10.1007/978-3-7091-8965-8_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Stainless Austenitic Steels"

1

Jayakumar, Tammana, Anish Kumar, Baldev Raj, Donald O. Thompson, and Dale E. Chimenti. "ULTRASONIC CHARACTERIZATION OF AUSTENITIC STAINLESS STEELS." In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: 34th Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP, 2008. http://dx.doi.org/10.1063/1.2902564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Santacreu, P. O., J. C. Glez, N. Roulet, T. Fröhlich, and Y. Grosbety. "Austenitic Stainless Steels For Automotive Structural Parts." In SAE 2006 World Congress & Exhibition. SAE International, 2006. http://dx.doi.org/10.4271/2006-01-1215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Y., W.-Y. Chen, A. S. Rao, et al. "Fracture Resistance of Cast Austenitic Stainless Steels." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60736.

Full text
Abstract:
Cast austenitic stainless steels (CASS) possess excellent corrosion resistance and mechanical properties and are used alongside with wrought stainless steels (SS) in light water reactors for primary pressure boundaries and reactor core internal components. In contrast to the fully austenitic microstructure of wrought SS, CASS alloys consist of a dual-phase microstructure of delta ferrite and austenite. The delta ferrite is critical for the service performance since it improves the strength, weldability, corrosion resistance, and soundness of CASS alloys. On the other hand, the delta ferrite is
APA, Harvard, Vancouver, ISO, and other styles
4

Wilhelm, Paul, Paul Steinmann, and Jürgen Rudolph. "Discussion of Fatigue Data for Austenitic Stainless Steels." In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-28066.

Full text
Abstract:
The first results of a detailed fatigue model for austenitic stainless steels in general and for the grades 1.4541 and 1.4550 are presented to describe the effect of the light water reactor (LWR) coolant environments on the fatigue life. The statistical evaluations are based on strain (and load) controlled test series from different institutions. The compiled fatigue data include not only results from America (Keller (1971), Conway (1975), Hale (1977), and Argonne National Laboratory (ANL)(1999–2005)), but also from Europe (Solin (2006), Le Duff (2008–2010), De Baglion (2011, 2012), Huin (2013
APA, Harvard, Vancouver, ISO, and other styles
5

Welch, Amberlee. "Gas Nitriding Comparison of Austenitic and Martensitic Stainless Steels." In HT2019. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.ht2019p0349.

Full text
Abstract:
Abstract The heat treatment method of gas nitriding is proving to be a viable option as a low temperature case hardening process for a variety of stainless steels used in numerous applications. A comparison between an austenitic stainless steel, grade 304, and a martensitic stainless steel, grade 410 in the hardened and non-hardened conditions is used to show the differences in properties obtained as a result of gas nitride process adjustments. The achieved properties, compound layer thickness, hardness, and porosity level along with the measured depth of hardening, can be used to determine wh
APA, Harvard, Vancouver, ISO, and other styles
6

San Marchi, Chris, and Brian P. Somerday. "Comparison of Stainless Steels for High-Pressure Hydrogen Service." In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-28811.

Full text
Abstract:
Type 316/316L austenitic stainless steels are considered the benchmark for resistance to hydrogen embrittlement in gaseous hydrogen environments. Type 316/316L alloys are used extensively in handling systems for gaseous hydrogen, which has created engineering basis for its use. This material class, however, is relatively expensive compared to other structural metals including other austenitic stainless steels, thus the hydrogen fuel cell community seeks lower-cost alternatives. Nickel content is an important driver of cost and hydrogen-embrittlement resistance; the cost of austenitic stainless
APA, Harvard, Vancouver, ISO, and other styles
7

Liang, Bin, Jianming Gong, Shantung Tu, and Yong Jiang. "Study on Corrosion Behavior of AISI316L and SAF2205 Stainless Steels in Acetic Acid Solution Containing Br-Ion." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-94054.

Full text
Abstract:
Petrochemical equipments made of austenitic stainless steel are often used in the environment of acetic acid solution. Premature corrosion failure led by acetic acid solution containing Cl− or Br− occurs in service. In the present paper, corrosion behavior of AISI316L austenitic stainless steel and SAF2205 duplex stainless steel in acetic acid solution containing Br-ion was studied by measuring the corrosion weight loss and Potentiodynamic anodic polarization curve. Effects of temperature and Br− concentration on the corrosion behaviors of AISI316L and SAF2205 material were investigated. The r
APA, Harvard, Vancouver, ISO, and other styles
8

Raj, Baldev. "Characterization of microstructures in austenitic stainless steels by ultrasonics." In 26th Annual review of progress in quantitative nondestrictive evaluation. AIP, 2000. http://dx.doi.org/10.1063/1.1306202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Lin, Bai An, Takashi Iijima, and Chris San Marchi. "Effect of Gaseous Hydrogen Charging on Nanohardness of Austenitic Stainless Steels." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63390.

Full text
Abstract:
Understanding of hydrogen effect on local mechanical properties of metals is important for understanding hydrogen embrittlement mechanisms. The effect of thermal gaseous hydrogen precharging on the nanomechanics of SUS310S and SUS304 austenitic stainless steels has been investigated using a combination of nanoindentation and atomic force microscopy (AFM). It is observed that hydrogen precharging decreases the first excursion load in load versus displacement curves and enhances the slip steps around indentations for both the materials, which experimentally support the hydrogen-enhanced localize
APA, Harvard, Vancouver, ISO, and other styles
10

Zheng, Jinyang, Abin Guo, Cunjian Miao, et al. "Cold Stretching of Cryogenic Pressure Vessels From Austenitic Stainless Steels." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57331.

Full text
Abstract:
Austenitic stainless steel (ASS) exhibits considerable work-hardening upon deformation while retaining the characteristics of the material. The high rate of austenite deformation hardening was utilized by cold stretching (CS) of cryogenic pressure vessels. A few percent deformation will give the vessel a considerable and homogeneous yield strength improvement, and the wall thickness may be greatly reduced. The authors have conducted extensive experimental and numerical studies on CS of cryogenic pressure vessels from ASS. A summary of our work as well as a brief introduction of the history, st
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Stainless Austenitic Steels"

1

Dalder, E. N. C., and M. C. Juhas. Austenitic stainless steels for cryogenic service. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5083581.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Imrich, K. J., D. R. Leader, N. C. Iyer, and M. R. Jr Louthan. Recycle of radiologically contaminated austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/10117155.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stoller, R. E. Microstructural evolution in fast-neutron-irradiated austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/5436209.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Maziasz, P. J., J. P. Shingledecker, N. D. Evans, and M. J. Pollard. Advanced Cast Austenitic Stainless Steels for High Temperature Components. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/944971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Clark, E. A. Materials compatibility of hydride storage materials with austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10159240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Clark, E. A. Materials compatibility of hydride storage materials with austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6485901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mei, Zequn. Fatigue crack propagation in austenitic stainless steels at cryogenic temperatures. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6950500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chopra, O. K., E. E. Gruber, and W. J. Shack. Fracture toughness and crack growth rates of irradiated austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/822551.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shack, W. J., T. F. Kassner, and Energy Technology. Review of environmental effects on fatigue crack growth of austenitic stainless steels. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/985102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Y., O. K. Chopra, Eugene E. Gruber, and William J. Shack. Irradiation-Assisted Stress Corrosion Cracking of Austenitic Stainless Steels in BWR Environments. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/1224951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Stainless Austenitic Steels' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography