Log in

Relevant bibliographies by topics / Stainless steel Martensitic stainless steel

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Stainless steel Martensitic stainless steel'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stainless steel Martensitic stainless steel.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Stainless steel Martensitic stainless steel"

1

Perez, Elmer, Masaki Tanaka, and Tatsuhiro Jibiki. "Wear of Stainless Steels - Cause and Transition of Wear of Martensitic Stainless Steel." Marine Engineering 48, no. 5 (2013): 662–69. http://dx.doi.org/10.5988/jime.48.662.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Selokar, Ashish, D. B. Goel, and Ujjwal Prakash. "A Comparative Study of Cavitation Erosive Behaviour of 23/8N Nitronic Steel and 13/4 Martensitic Stainless Steel." Advanced Materials Research 585 (November 2012): 554–58. http://dx.doi.org/10.4028/www.scientific.net/amr.585.554.

Full text

Abstract:

Abstract: Hydroturbine blades in hydroelectric power plants are subjected to erosion. Currently these blades are made of 13/4 martensitic stainless steel (ASTM grade A743). This steel suffers from several maintenance and welding related problems. Nitronic steels are being considered as an alternative to martensitic stainless steels since they have good weldability. In present work, erosive behaviour of 13/4 Martensitic and Nitrogen alloyed austenitic stainless steel (23/8N steel) has been studied. Cavitation erosion tests were carried out in distilled water at 20 KHz frequency at constant ampl

APA, Harvard, Vancouver, ISO, and other styles

3

Scarpini Cândido, Verônica, and Sergio Neves Monteiro. "The Effect of Phase Transformation on the Tensile Fracture of Austenitic Stainless Steel." Materials Science Forum 869 (August 2016): 508–13. http://dx.doi.org/10.4028/www.scientific.net/msf.869.508.

Full text

Abstract:

The tensile fracture of two austenitic stainless steels with different degrees of stability for low temperature strain induced martensitic transformation was investigated. A stable AISI type 310 stainless steel displayed typical tensile stress-strain curves with decreasing work hardening rate at temperatures in the interval of 25 to-196°C, in which no martensitic transformation occurred. By contrast, a metastable type 302 stainless steel with martensitic transformation from 25 to-196°C showed a range of plastic deformation with increasing work hardening rate. The fracture of the stable 310 ste

APA, Harvard, Vancouver, ISO, and other styles

4

Song, Ren Bo, Yu Pei, Yi Su Jia, Zhe Gao, Yang Xu, and Peng Deng. "Effect of Different Deformation on Microstructures and Properties in 304HC Austenitic Stainless Steel Wire." Materials Science Forum 788 (April 2014): 323–28. http://dx.doi.org/10.4028/www.scientific.net/msf.788.323.

Full text

Abstract:

Two different components of Φ5.5mm 304HC stainless steel wires were drawn at room temperature. After the drawing tests, hard wires of Φ4.5mm, Φ3.8mm and Φ3.45mm were obtained. During the process of drawing, the stacking fault energy of the metastable austenitic stainless steel was low, which have caused strain-induced martensitic transformation. By XRD, TEM, martensitic volume fraction measurement, etc., the results show that the strain-induced martensitic transformations of the two different components were different significantly. When the deformation amount was controlled at 33% or less, a

APA, Harvard, Vancouver, ISO, and other styles

5

Mao, Bo, Shuangjie Chu, and Shuyang Wang. "Effect of Grain Size on the Friction-Induced Martensitic Transformation and Tribological Properties of 304 Austenite Stainless Steel." Metals 10, no. 9 (2020): 1246. http://dx.doi.org/10.3390/met10091246.

Full text

Abstract:

Friction and wear performance of austenite stainless steels have been extensively studied and show a close relationship with the friction-induced martensitic transformation. However, how the grain size and associated friction-induced martensitic transformation behavior affect the tribological properties of austenite steels have not been systematically studied. In this work, dry sliding tests were performed on an AISI 304 stainless steel with a grain size ranging from 25 to 92 μm. The friction-induced surface morphology and microstructure evolution were characterized. Friction-induced martensit

APA, Harvard, Vancouver, ISO, and other styles

6

Lin, Yu Li, Chih Chung Lin, An Chun Liu, and Hong Jen Lai. "TEM Microstructural Investigation of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments." Advanced Materials Research 79-82 (August 2009): 2107–10. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.2107.

Full text

Abstract:

Microstructure of 0.63C-12.7Cr martensitic stainless steel during various tempering treatments was investigated in this study. Results demonstrate that finely distributed primary carbides were observed on 0.63C-12.7Cr martensitic stainless steel. The matrix phase of 0.63C-12.7Cr martensitic stainless steel when tempered below 500 °C was identified as martensite. However, the matrix structure when tempered at 500 °C and 600 °C was found containing of both ferrite and martensite. On carbide particles, mixed of M7C3 and M23C6 particles were observed on all specimens when tempered at 200-600 °C. T

APA, Harvard, Vancouver, ISO, and other styles

7

Akhmed'yanov, A. M., S. V. Rushchits, and M. A. Smirnov. "Hot Deformation of Martensitic and Supermartensitic Stainless Steels." Materials Science Forum 870 (September 2016): 259–64. http://dx.doi.org/10.4028/www.scientific.net/msf.870.259.

Full text

Abstract:

The deformation behavior of supermartensitic and martensitic stainless steels was investigated through compression test using Gleeble-3800 thermo-mechanical simulator within the temperature range of 900 – 1200 оС and the strain rates range of 0.01 – 10 s-1. The results showed that the flow stress and the peak strain increase with the drop in the deformation temperature and the rise in the strain rate. Flow stress of SMS steel exceeds flow stress of MS steel for same regimes of deformation. The difference in flow stress increases with the increase in Zener-Hollomon parameter, but does not excee

APA, Harvard, Vancouver, ISO, and other styles

8

Başyiğit, Aziz, and Mustafa Murat. "The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds." Metals 8, no. 11 (2018): 972. http://dx.doi.org/10.3390/met8110972.

Full text

Abstract:

The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, while martensitic 420 alloy provides high strength values besides satisfactory corrosion properties at ambient atmospheres. In this work; 420 quality martensitic stainless steel is TIG (Tungsten Inert Gas) welded with 304L quality low carbon austenitic stainless steel plates. As filler metal dominantly determines the weld metals chemical compositions and final microstructure

APA, Harvard, Vancouver, ISO, and other styles

9

Nagy, E., Valéria Mertinger, Ferenc Tranta, and Jenő Sólyom. "Investigation of Thermomechanical Treated Austenitic Stainless Steel." Materials Science Forum 473-474 (January 2005): 237–42. http://dx.doi.org/10.4028/www.scientific.net/msf.473-474.237.

Full text

Abstract:

During thermomechanical treatment of austenitic stainless steel a’ martensite and e martensite form in the austenite matrix. The martensitic transformation and deforming existing together result a high elongation at the investigated steel belonging to the TRIP grades. The amount of a’and e martensite depends on the strain level as well as on the deforming temperature in this steel. In the course of thermomechanical treatments we measured the amount and texture of the existing phases at different temperature and strain. It has been stated that the martensites are dominant in low temperature ran

APA, Harvard, Vancouver, ISO, and other styles

10

Sekhar, K. Chandra, Bhagwati Prasad Kashyap, and Sandeep Sangal. "AFM Characterization of Structural Evolution and Roughness of AISI 304 Austenitic Stainless Steel under Severe Deformation by Wavy Rolling." Advanced Materials Research 794 (September 2013): 230–37. http://dx.doi.org/10.4028/www.scientific.net/amr.794.230.

Full text

Abstract:

Stainless steels such as ferrritic, austenitic, martensitic and duplex stainless steels are well known for their corrosion resistance to varying extents. Among these, austenitic stainless steels exhibit superior corrosion resistance and better ductility for formability. Therefore, the ability to give simple to intricate shapes in this grade of steel brings their potential for a wide range of applications. However, the meta-stable austenite in AISI 304 is known to undergo a strain induced martensitic (SIM) transformation during conventional rolling at room temperature. This strain induced marte

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Stainless steel Martensitic stainless steel"

1

Barlow, Lilian D. "The effect of austenitising and tempering parameters on the microstructure and hardness of martensitic stainless steel AISI 420." Pretoria : [s.n.], 2009. http://upetd.up.ac.za/thesis/available/etd-11262009-182934/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Naraghi, Reza. "Martensitic Transformation in Austenitic Stainless Steels." Thesis, KTH, Metallografi, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-37214.

Full text

Abstract:

Martensitic transformation is very important in austenitic stainless steels where the transformation induced plasticity phenomenon provides a combination of good mechanical properties, such as formability and strength. However, the difficulty of predicting the material behaviour is one of the major drawbacks of these steels. In order to model this behaviour it is of great importance to be able to characterize the morphology, crystallography and the amount of different types of martensite. The morphology and crystallography of thermal and deformation induced lath martensite in stainless steels

APA, Harvard, Vancouver, ISO, and other styles

3

Hirsch, Michael Robert. "Fretting behavior of AISI 301 stainless steel sheet in full hard condition." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24759.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pirouznia, Pouyan. "High cycle fatigue properties of stainless martensitic chromium steel springs." Thesis, KTH, Materialteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103201.

Full text

Abstract:

For many materials and components like in high speed trains and airplanes fatigue failures occur in the range of over 107 load cycles which is called the high cycle fatigue range. A modern version of the springs was invented which are applied in a certain application. Ultrasonic fatigue testing (20 kHz machine) was conducted for evaluating the steel of the springs. This research explores the fundamental understanding of high cycle fatigue testing of strip steel and assesses a stainless martensitic chromium steel at the high cycle fatigue range. Finite element modeling was conducted to gain kno

APA, Harvard, Vancouver, ISO, and other styles

5

Hedström, Peter. "Deformation induced martensitic transformation of metastable stainless steel AISI 301 /." Luleå : Luleå University of Technology, 2005. http://epubl.luth.se/1402-1757/2005/79.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hedström, Peter. "Deformation induced martensitic transformation of metastable stainless steel AISI 301." Licentiate thesis, Luleå, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25748.

Full text

Abstract:

Metastable stainless steels are promising engineering materials demonstrating good corrosion resistance and mechanical properties. Their mechanical properties are however significantly affected by the deformation induced martensitic transformation. Hence, in order to use these steels to their full potential it is vital to have profound knowledge on this martensitic phase transformation. The aim of this thesis was therefore to investigate the evolution of phase fractions, texture, microstrains and microstructure to improve the current understanding of the deformation induced martensitic transfo

APA, Harvard, Vancouver, ISO, and other styles

7

Ren, Gang. "Corrosion and passivity of 13Cr supermartensitic stainless steel." Thesis, University of Cambridge, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.609807.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Benítez, Vélez Soraya. "Oxidation kinetics and mechanisms in HT-9 ferritic/martensitic stainless steel." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0012151.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Prasannavenkatesan, Rajesh. "Microstructure-sensitive fatigue modeling of heat treated and shot peened martensitic gear steels." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31713.

Full text

Abstract:

Thesis (Ph.D)--Mechanical Engineering, Georgia Institute of Technology, 2010.<br>Committee Chair: David L. McDowell; Committee Member: G. B. Olson; Committee Member: K. A. Gall; Committee Member: Min Zhou; Committee Member: R. W. Neu. Part of the SMARTech Electronic Thesis and Dissertation Collection.

APA, Harvard, Vancouver, ISO, and other styles

10

Tibblin, Fritjof. "Characterization of a newly developed martensitic stainless steel powder for Laser and PTA cladding." Thesis, KTH, Materialvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-163788.

Full text

Abstract:

A newly developed martensitic stainless steel powder, called “powder A”, designed for surface coating with laser cladding and PTA cladding was characterized. The purpose with powder A is to achieve both good corrosion resistance and wear resistance in a stainless steel grade. The investigation of powder A was divided into cladding characterization, microstructural investigation and a property comparison to existing grades 316 HSi and 431 L. Powder A was successfully deposited with laser cladding, exhibiting a wide process window, and PTA cladding. In both cases no preheating was required and n

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Stainless steel Martensitic stainless steel"

1

Wood, Gregory John. Tribological properties of surface engineered martensitic stainless steel. University of Birmingham, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

1927-, Parr J. Gordon, ed. Stainless steel. American Society for Metals, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Harrison, Harry. Stainless steel visions. TOR, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Harrison, Harry. Stainless steel visions. Legend, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Peach, Sharon. Stainless steel databook. Metal Bulletin Books, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Harrison, Harry. Stainless steel visions. Legend, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fulcher, Nancy T. Stainless steel mill products. Office of Industries, U.S. International Trade Commission, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

The stainless steel rule. Farrar, Straus, Giroux, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Harrison, Harry. A stainless steel trio. Tor, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Harrison, Harry. A stainless steel trio. Tor, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Stainless steel Martensitic stainless steel"

1

Li, D. Z., Y. Y. Li, P. Wang, and S. P. Lu. "Martensitic Stainless Steel 0Cr13Ni4Mo for Hydraulic Runner." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118019467.ch27.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yilmaz, R., and Ali Türkyilmazoglu. "Tensile Properties of Martensitic Stainless Steel Weldments." In Materials and Technologies. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-460-x.319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dieck, Sebastian, Martin Ecke, Paul Rosemann, and Thorsten Halle. "Reversed Austenite for Enhancing Ductility of Martensitic Stainless Steel." In Proceedings of the International Conference on Martensitic Transformations: Chicago. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76968-4_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Trivedi, Hitesh K., Frederick Otto, Bryan McCoy, Rabi S. Bhattacharya, and Timothy Piazza. "Heat Treatment Process for Martensitic Stainless Steel Pyrowear 675 for Improved Corrosion Resistance." In Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, 2014. http://dx.doi.org/10.1520/stp158020140061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Xu, J. Y., B. J. van Brussel, J. Noordhuis, P. M. Bronsveld, and J. Th M. de Hosson. "Martensitic Transformation in 304 Stainless Steel after Implantation with Neon." In Surface Engineering. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0773-7_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ahmed, Sarfraj, and Arjun Kundu. "Erosion Response of Martensitic Stainless Steel Subjected to Slurry Flow." In Green Materials and Advanced Manufacturing Technology. CRC Press, 2020. http://dx.doi.org/10.1201/9781003056546-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sadawy, M. M. "Electrochemical Evaluation of Martensitic-Austenitic Stainless Steel in Sulfuric Acid Solutions." In Supplemental Proceedings. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062142.ch84.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

yuan, Wei Qiao, and Li Yue zhong. "Analysis of Heat Treatment for Martensitic Stainless Steel Used in CRDM." In Energy Materials 2014. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48765-6_58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Yuan, Wei Qiao, and Li Yue Zhong. "Analysis of Heat Treatment for Martensitic Stainless Steel Used in CRDM." In Energy Materials 2014. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119027973.ch58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Karthi, S., S. P. Kumaresh Babu, S. Shanmugham, and V. P. Balaji. "Study on the Dissimilar Joining of Martensitic Stainless Steel and Carbon Steel Using TIG Welding." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9433-2_47.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Stainless steel Martensitic stainless steel"

1

Codd, Daniel S. "Automotive Mass Reduction with Martensitic Stainless Steel." In SAE 2011 World Congress & Exhibition. SAE International, 2011. http://dx.doi.org/10.4271/2011-01-0427.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bandyopadhyay, Subhra, and Silpa Budugur Suresh. "Residual Stress Measurements in Martensitic Stainless Steel." In ASME 2005 Pressure Vessels and Piping Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/pvp2005-71492.

Full text

Abstract:

Residual stresses may be generated in target structural material used in accelerator-driven transmutation. Calibration curves were developed for transmutation target structural materials using positron annihilation spectroscopic (PAS) method. These calibration curves consisted of different line shape parameters (S, T & W) determined by the PAS method on martensitic stainless steel as a function of tensile stress/strain imparted to cylindrical specimens. This paper presents a comparative analysis of residual stresses in these specimens as a function of (S, T & W) determined by the PAS t

APA, Harvard, Vancouver, ISO, and other styles

3

Haušild, P., P. Pilvin, and M. Karlík. "Mechanical Behavior of a Metastable Austenitic Stainless Steel." In ESOMAT 2009 - 8th European Symposium on Martensitic Transformations. EDP Sciences, 2009. http://dx.doi.org/10.1051/esomat/200906016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Daurelio, Giuseppe, Antonio D. Ludovico, Christos N. Panagopoulos, and Corrado Tundo. "Ferritic, martensitic, and precipitation hardening stainless steel laser weldings." In Second GR-I International Conference on New Laser Technologies and Applications, edited by Alexis Carabelas, Paolo Di Lazzaro, Amalia Torre, and Giuseppe Baldacchini. SPIE, 1998. http://dx.doi.org/10.1117/12.316611.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

De Lorenzi-Venneri, Giulia, and Scott D. Crockett. "AM363 martensitic stainless steel: A multiphase equation of state." In SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Author(s), 2017. http://dx.doi.org/10.1063/1.4971554.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

"Dry Sliding Wear Characteristics of AISI440C Martensitic Stainless Steel." In International Conference on Advances in Engineering and Technology. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0314169.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Beese, A. M., D. Mohr, and P. O. Santacreu. "Isotropic Phase Transformation in Anisotropic Stainless Steel 301LN Sheets." In ESOMAT 2009 - 8th European Symposium on Martensitic Transformations. EDP Sciences, 2009. http://dx.doi.org/10.1051/esomat/200902001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tong, Xingsheng, Chen Wang, and Wei Ye. "The research on plasma nitriding of AISI410 martensitic stainless steel." In 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Buono, V., R. Carvalho, L. Lima, M. Lima, A. Rocha, and T. Santos. "Austenite Reversion during ing Tempering of Martensitic-Ferritic Stainless Steel." In MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_468_475.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pyshmintsev, I. Yu, S. M. Bityukov, V. I. Pastukhov, S. V. Danilov, L. O. Vedernikova, and M. L. Lobanov. "Evolution of microstructure in stainless martensitic steel for seamless tubing." In MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2017): Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Author(s), 2017. http://dx.doi.org/10.1063/1.5017396.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Stainless steel Martensitic stainless steel"

1

Li, H., R. H. Jones, and D. S. Gelles. Effect of internal hydrogen on the mixed-mode I/III fracture toughness of a ferritic/martensitic stainless steel. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/114928.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Huaxin, D. S. Gelles, and J. P. Hirth. Fracture toughness of the IEA heat of F82H ferritic/martensitic stainless steel as a function of loading mode. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/543286.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Li, H., R. H. Jones, and D. S. Gelles. Dependence of mode I and mixed mode I/III fracture toughness on temperature for a ferritic/martensitic stainless steel. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/114929.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Buchenauer, Dean A., and Richard A. Karnesky. Stainless Steel Permeability. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1221706.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bates, D. J., S. R. Doctor, P. G. Heasler, and E. Burck. Stainless Steel Round Robin Test: Centrifugally cast stainless steel screening phase. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/5913079.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lee, E. U., and R. Taylor. High Nitrogen Stainless Steel. Defense Technical Information Center, 2011. http://dx.doi.org/10.21236/ada546181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jones, W. B., R. J. Bourcier, and J. A. Van Den Avyle. Thermal fatigue of stainless steel. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/5749580.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Karmiol, Benjamin, Michael Anthony McBride, Enkeleda Dervishi-Whetham, and Alexander Steven Edgar. Stainless Steel Coating Test Report. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1638619.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Robert F. Buck. Development of New Stainless Steel. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/850283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Dehoff, Ryan R., and Greg Engleman. NanoComposite Stainless Steel Powder Technologies. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1055074.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!