Log in

Relevant bibliographies by topics / Stamp hot deformation

Contents

Journal articles
Dissertations / Theses
Conference papers

Academic literature on the topic 'Stamp hot deformation'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stamp hot deformation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Stamp hot deformation"

1

Pankratov, Dmitriy L., and Alexander V. Shaparev. "Truck Synchronizer Rings Recovery by Plastic Deformation Technology." Defect and Diffusion Forum 410 (August 17, 2021): 42–47. http://dx.doi.org/10.4028/www.scientific.net/ddf.410.42.

Full text

Abstract:

A truck's gearbox friction rings restoring process by hot 3D stamping was developed and adopted for implementation. Using this recovery method in combination with subsequent synchronizer rings mechanical processing allows restoring up to 95% resource of worn parts. It was established that section of a stamp's deforming element for axisymmetrical parts restoring should be a one-way wedge with a sloping face facing the reconstructed surface. The most significant factors influencing the transmission gearbox synchronizer rings restoring process are: stamp deforming element thickness, plunging dept

APA, Harvard, Vancouver, ISO, and other styles

2

Mukhametzyanov, Ilnar R., Gamir F. Mukhametzyanov, Vladimir I. Astashchenko, and Gulnara F. Mukhametzyanova. "Development of technology to restore the working area of the stamp tool." Yugra State University Bulletin 19, no. 3 (2023): 166–72. http://dx.doi.org/10.18822/byusu202303166-172.

Full text

Abstract:

Subject of research: technology for restoring the working area of a stamp tool, the structure and properties of the deposited layer of the restored stamp surface. Purpose of research: to develop a technology for restoring the working area of a hot deformation die insert for the formation of a gradient structure and properties of the metal over the cross section of the deposited zone. Methods and object of research: a technology for restoring the insertion of a worn hot-forming stamp on the beam of the front axle of a KAMAZ truck using two-layer electric arc surfacing with one type

APA, Harvard, Vancouver, ISO, and other styles

3

Berladir, K., T. Hovorun, M. Bondarenko, and S. Vorobiov. "Application of Reinforcing Thermocycling Treatment for Materials of Stamps Hot Deformation." Journal of Engineering Sciences 6, no. 2 (2019): c6—c10. http://dx.doi.org/10.21272/jes.2019.6(2).c2.

Full text

Abstract:

The paper is devoted to the search for technological methods of increasing the resistance of the stamp tool for hot deformation. New non-standard combinations of cyclization schemes and parameters of thermocycling processing within the regime were developed. This is allowed the creation of managed structural states in the metal due to the grinding of grain, the creation of high density of defects, and the acceleration of diffusion processes to effectively manage the structure, increase the mechanical, operational properties and prevent the destruction of the working surfaces of the tool. New m

APA, Harvard, Vancouver, ISO, and other styles

4

Vorontsov, A. L., and E. O. Reshikov. "RADIAL EXTRUSION OF A PIPE BILLET WITH INTERNAL LEDGE. EXTENDED EXPERIMENTAL VERIFICATION OF THEORETICAL FORMULAS FOR EXTRUSION WITHOUT HARDENING." Spravochnik. Inzhenernyi zhurnal, no. 307 (October 2022): 44–55. http://dx.doi.org/10.14489/hb.2022.10.pp.044-055.

Full text

Abstract:

A continuation of the experimental verification of theoretical results, begun in the previous article, is outlined. The design and characteristics of the new experimental stamp are described in detail. Studies of extrusion of a non-hardening material – lead C1, simulating hot deformation, were carried out. The high accuracy of the obtained calculation formulas is confirmed.

APA, Harvard, Vancouver, ISO, and other styles

5

Kuleshkov, Yuriy, Timofey Rudenko, Mikhail Krasota, Ruslan Osin, and Vasyl Reva. "Restoration of Piston Pins by Hot Plastic Deformation." Central Ukrainian Scientific Bulletin. Technical Sciences, no. 4(35) (2021): 54–62. http://dx.doi.org/10.32515/2664-262x.2021.4(35).54-62.

Full text

Abstract:

The aim of the study is to create a theoretical basis that allows to calculate the forces of hot plastic deformation of the piston pin. One of the promising methods of restoring the piston fingers of the connecting rod - piston group of internal combustion engines is the method of hot plastic deformation. The process of restoring the piston fingers by hot plastic deformation can increase their strength and, in particular, fatigue strength. When developing the technological process of restoration of piston fingers using the method of hot plastic deformation by distributing it with a punch in th

APA, Harvard, Vancouver, ISO, and other styles

6

Minkov, K. A., A. N. Minkov, and A. A. Khlybov. "CHOICE OF TEMPERATURE AND TIME CONDITIONS OF HEATING FOR THE COMBINED PROCESS OF BORATING AND VOLUME TRAINING OF LARGE STAMPS OF 5KhNM STEEL." Izvestiya. Ferrous Metallurgy 62, no. 9 (2019): 681–85. http://dx.doi.org/10.17073/0368-0797-2019-9-681-685.

Full text

Abstract:

The stamps for hot deformation are widely adopted in industry. In use they are affected by high temperatures, tension (close to a fluidity limit) and variable thermal loadings. High-hardenability tool steels with high mechanical characteristics are used for stamps production. In this article, the possibility of use of 5KhNM steel for this goal is considered. One of technological operations at production of stamps is training in oil. It is rational to apply volume and superficial hardening, in particular chemical heat treatment, to improve operational characteristics of stamps, including wear r

APA, Harvard, Vancouver, ISO, and other styles

7

Dragobetskyi, Volodymyr, Oleksandr Kaliuzhnyi, Volodymyr Kaliuzhnyi, and Stanislav Sytnyk. "Improving the shape and dimensional accuracy of hollow semi-finished products during hot reverse extrusion from square workpieces." Mechanics and Advanced Technologies 8, no. 3(102) (2024): 256–64. http://dx.doi.org/10.20535/2521-1943.2024.8.3(102).297388.

Full text

Abstract:

Stamping of round hollow semi-finished products by hot reverse extrusion from round and square workpieces is the first stamping step in the manufacture of hollow products for special purposes. These products require certain mechanical properties along the wall height and in the bottom part, which can be achieved by working out the metal structure by plastic deformation. The bottom part is worked out by reverse extrusion. The wall properties are obtained in the following stages of drawing the semi-finished product with thinning after extrusion. The use of square workpieces results in more inten

APA, Harvard, Vancouver, ISO, and other styles

8

Kolotyrin, Konstantin P., Sergey A. Bogatyrev, Yuri Yu Kostyukhin, Diana Yu Savon, and Alexey I. Shinkevich. "Justification of the Application of Resource-Saving Technology for the Restoration of Metal-Intensive Rear Semi-Axles of Trucks Using Hot Plastic Deformation." Sustainability 14, no. 1 (2021): 16. http://dx.doi.org/10.3390/su14010016.

Full text

Abstract:

The article is devoted to the substantiation of technological foundations for the restoration of extremely worn-out, metal-consuming, and resource-consuming parts, in a method consisting of applying a compensating metal wear with subsequent plastic deformation. Currently, there are no technologies for their restoration in a repair facility that guarantee the resilience of the factory product. The proposed technological process of repair consists of butt welding onto the end of the spline semi-axle shank, compensating for the wear of the metal, the volume of which takes into account the losses

APA, Harvard, Vancouver, ISO, and other styles

9

Fujii, Tatsuya, Atsuki Tsuji, and Junji Murata. "Solid-State Electrochemical Oxide Pattern Formation on Au Surface Utilizing Polyelectrolyete Membrane Stamps." ECS Meeting Abstracts MA2024-02, no. 67 (2024): 4641. https://doi.org/10.1149/ma2024-02674641mtgabs.

Full text

Abstract:

Nanoscale patterned gold (Au) surfaces are promising for a wide range of applications such as bio/chemical sensors and high-performance electrodes. However, pattern formation by conventional methods, which typically involves the use of resist, is complex, cost-consuming, and poses a high environmental burden. In this study, we report an investigation into the interfacial chemical reaction occurring between the polymer electrolyte membrane (PEM) and Au surfaces and its application for microscale pattern formation. Introducing a PEM instead of a liquid electrolyte can realize solid-state electro

APA, Harvard, Vancouver, ISO, and other styles

10

Sydorchuk, Oleh. "INFLUENCE OF HEAT TREATMENT ON DIE STEEL 4Kh4N5М4F2 AND ESTABLISHMENT OF ITS PHYSICAL AND MECHANICAL PROPERTIES". Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, № 1(7) (23 квітня 2021): 34–38. http://dx.doi.org/10.20998/2413-4295.2021.01.05.

Full text

Abstract:

The results of researches after heat treatment (hardening and tempering) of alloyed structural steel of grade 4Kh4N5М4F2 in cast and forged state are given. It is recommended to carry out partial recrystallization (incomplete annealing) of the experimental steel (4Kh4N5М4F2) at a temperature of 750±20 °С. It is recommended to carry out thermo-deformation treatment (forging at a temperature of 1170±20 °C), which doubled the grain yield of hardened steel and increased the toughness five times after tempering. The optimal temperature mode of hardening (1095±5 °С) of cast and forged steel, the har

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Stamp hot deformation"

1

Berladir, K. V. "Heat treatment of the stamp hot deformation." Thesis, Сумський державний університет, 2012. http://essuir.sumdu.edu.ua/handle/123456789/28680.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Раб, Валентина Миколаївна, Валентина Николаевна Раб, Valentyna Mykolaivna Rab та Е. А. Коваленко. "Выбор материала и термического упрочнения штампа горячего деформирования". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/8283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Носонова, Любов В`ячеславівна, Любовь Вячеславовна Носонова, Liubov Viacheslavivna Nosonova та В. О. Дворніченко. "Вплив процесу хромоалітування на властивості штампу гарячого деформування зі сталі 5ХНТ". Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/8188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Stamp hot deformation"

1

AKSENOV, V. S., S. M. FROLOV, I. A. SADYKOV, I. O. SHAMSHIN, A. S. SILANTIEV, and V. A. SMETANYUK. "SHAPING OF EXPANDING CHANNEL FOR PRODUCING PLANAR DETONATIONS AT OPEN END." In 13th International Colloquium on Pulsed and Continuous Detonations. TORUS PRESS, 2022. http://dx.doi.org/10.30826/icpcd13a24.

Full text

Abstract:

In [1], the innovative technology is proposed for pulsed detonation stamping of thin sheet parts. The technology consists in periodically exposing a workpiece to detonation waves and hot gaseous detonation products. The distinctive feature of the technology is the absence of a punch (the mating part of a pro¦led matrix). Compared to the detonation of condensed explosives, the use of gaseous detonation for stamping allows multiple periodic gasdynamic and thermal impact on a workpiece and simpli¦es the execution of technical supervision requirements. Due to the combined gasdynamic and thermal e¨

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!