Relevant bibliographies by topics / Standard ISO 9613 Part 2

Contents

  1. Journal articles
  2. Books
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Standard ISO 9613 Part 2'

Author: Grafiati
Published: 3 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Standard ISO 9613 Part 2.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Standard ISO 9613 Part 2"

1

Carlos, Alberto Echeverri-Londoño, and Elizabeth González-Fernández Alice. "Prediction of noise from wind turbines: a theoretical and experimental study." Revista Facultad de Ingeniería, Universidad de Antioquia, no. 90 (December 14, 2018): 28–33. https://doi.org/10.17533/udea.redin.n90a04.

Full text
Abstract:
Several noise propagation models used to calculate the noise produced by wind turbines have been reported. However, these models do not accurately predict sound pressure levels. Most of them have been developed to estimate the noise produced by industries, in which wind speeds are less than 5 m/s, and conditions favor its spread. To date, very few models can be applied to evaluate the propagation of sound from wind turbines and most of these yield inaccurate results. This study presents a comparison between noise levels that were estimated using the prediction method established in ISO 9613 Pa
APA, Harvard, Vancouver, ISO, and other styles
2

Carlos, Alberto Echeverri-Londoño, and Elizabeth González-Fernández Alice. "Model for the prediction of noise from wind turbines." Revista Facultad de Ingeniería -redin-, no. 88 (September 18, 2018): 55–65. https://doi.org/10.17533/udea.redin.n88a06.

Full text
Abstract:
This article presents a prediction model that can be applied to estimate the propagation of noise generated by wind turbines through an easy calculation procedure. The proposed prediction model is semi-empirical and based on the analysis of phenomena related to the generation and propagation of sound levels and field measurements. An experimental program was designed that included the measurement of sound pressure levels with a sound level meter to different weather conditions and distances within a wind farm to compare them with the levels estimated by ISO 9613 Part 2. A statistical analysis
APA, Harvard, Vancouver, ISO, and other styles
3

Echeverri-Londoño, Carlos Alberto, and Alice Elizabeth González Fernández. "Prediction of noise from wind turbines: theoretical and experimental study." Revista Facultad de Ingeniería Universidad de Antioquia, no. 90 (December 14, 2018): 34–41. http://dx.doi.org/10.17533/udea.redin.n90a04.

Full text
Abstract:
Several noise propagation models used to calculate the noise produced by wind turbines have been reported. However, these models do not accurately predict sound pressure levels. Most of them have been developed to estimate the noise produced by industries, in which wind speeds are less than 5 m/s, and conditions favor its spread. To date, very few models can be applied to evaluate the propagation of sound from wind turbines and most of these yield inaccurate results. This study presents a comparison between noise levels that were estimated using the prediction method established in ISO 9613 Pa
APA, Harvard, Vancouver, ISO, and other styles
4

Lam, Y. W. "Standard Calculation of Outdoor Noise Propagation – Errors Due to Propagation Effect." Building Acoustics 3, no. 4 (1996): 251–64. http://dx.doi.org/10.1177/1351010x9600300404.

Full text
Abstract:
This paper looks at the common errors that may occur when applying existing standard methods of outdoor noise calculation to realistic environments. The two methods investigated are those described in the CONCAWE report 4/81 and the international standard ISO 9613 Part 2. These standard methods are based mainly on empirical developments and are therefore limited by the environmental conditions upon which the methods were derived. Based on comparisons obtained in real outdoor measurements, this paper shows that significant errors occur when the methods are applied to situations where the ground
APA, Harvard, Vancouver, ISO, and other styles
5

Kaliski, Kenneth, Robert O'Neal, and Mark Bastasch. "Sound emissions in solar and battery energy storage projects." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 264, no. 1 (2022): 745–54. http://dx.doi.org/10.3397/nc-2022-805.

Full text
Abstract:
While sound levels from solar and battery storage equipment are not unusually high, particularly when compared to other energy generation, a permitting process may require an acoustical evaluation to assess regulatory compliance. The basic acoustical analysis process for solar and battery storage projects is very similar to other facilities: an acoustical model is developed based on the equipment layout and geometry using a propagation standard such as ISO 9613-2. A key input to ISO 9613-2 is the sound level of the equipment. There are several standards and other approaches for determining the
APA, Harvard, Vancouver, ISO, and other styles
6

Probst, Wolfgang. "ISO/CD 9613-2 – Zusammenfassung und Erläuterung vorgesehener Verbesserungen und Ergänzungen/ISO/CD 9613-2 – Summary and explanation of planned improvements and additions." Lärmbekämpfung 17, no. 02 (2022): 39–46. http://dx.doi.org/10.37544/1863-4672-2022-02-9.

Full text
Abstract:
Im Zuge einer geplanten Revision des Verfahrens zur Berechnung der Schallausbreitung ISO 9613-2:1996 wurde ein Committee Draft erstellt, dessen wichtigste geänderte Inhalte im Folgenden erläutert werden. Dies betrifft insbesondere die Berücksichtigung des im Nahbereich einer Schallquelle verschwindenden Bodeneinflusses, die Einbeziehung der aufgrund gekrümmter Schallstrahlen bei großen Entfernungen verschwindenden Schirmwirkung, die Reflexionsberechnung bei um vertikale Achsen gekrümmten Flächen, die Aufnahme eines detaillierteren Verfahrens zur Walddämpfung und die Verwendung der lokalen Wind
APA, Harvard, Vancouver, ISO, and other styles
7

Probst, Wolfgang. "Vergleich von Verfahren zur Schallberechnung und Vorschläge zur Revision der ISO 9613-2/Comparison of methods for sound calculation – proposals for the revision of ISO 9613-2." Lärmbekämpfung 15, no. 06 (2020): 200–207. http://dx.doi.org/10.37544/1863-4672-2020-06-30.

Full text
Abstract:
Zusammenfassung Im Zuge von Untersuchungen zur Revision der Internationalen Norm ISO 9613-2 sind die mit diesem und mit anderen Verfahren prognostizierten Einflüsse von Boden und Meteorologie sowie von Schallschirmen verglichen worden. Dabei zeigte sich, dass das Zusammenwirken von Bodeneinfluss und Schirmdämpfung nur in Bezug auf das „Alternative Verfahren“ nach 7.3.2 konsistent gelöst ist, während es bei Anwendung des „Allgemeinen Verfahrens“ nach 7.3.1 bei großen Abständen und niedrigen Schirmen zu unplausiblen Ergebnissen führen kann. Die Ursachen, die aus der Historie zu erklären sind, wu
APA, Harvard, Vancouver, ISO, and other styles
8

Papadakis, Nikolaos M., and Georgios E. Stavroulakis. "Finite Element Method for the Estimation of Insertion Loss of Noise Barriers: Comparison with Various Formulae (2D)." Urban Science 4, no. 4 (2020): 77. http://dx.doi.org/10.3390/urbansci4040077.

Full text
Abstract:
Noise barriers are a critical part of noise mitigation in urban and rural areas. In this study, a comparison of the insertion loss calculations of noise barriers via the Finite Element Method (FEM) and various formulae (Kurze–Anderson, ISO 9613-2/Tatge, Menounou) is presented in the case of two-dimensional acoustic radiation problems. Some of the cases explored include: receiver in the illuminated zone, in the shadow zone, in the shadow border, source in medium, long, short distance from the barrier, source and receiver near barrier, and source above the barrier. Comparisons of the results ind
APA, Harvard, Vancouver, ISO, and other styles
9

BARTOLOMAEUS, Wolfram. "Retro-diffraction - importance for the calculation of road traffic noise." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 270, no. 9 (2024): 2104–12. http://dx.doi.org/10.3397/in_2024_3139.

Full text
Abstract:
In geometric acoustics, "retro-diffraction" describes the loss of energy when reflected at the upper edges of noise screens. By bending the sound beam against the direction of propagation under consideration, reflected energy of the mirror sound source is reduced by up to 5 dB in addition to the absorption. This effect becomes particularly effective if the sound beam is blocked by a noise screen in the direction of propagation under consideration, meaning that diffraction also occurs in this direction. Sound attenuation by retro-diffraction can be found in the French standard NF S 31-133, an a
APA, Harvard, Vancouver, ISO, and other styles
10

Bastasch, Mark. "Developing an American (ANSI) Standard for the Prediction of Wind Turbine Sound Levels." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 265, no. 1 (2023): 6653–56. http://dx.doi.org/10.3397/in_2022_1003.

Full text
Abstract:
Common modeling methods used in the United States yield relatively similar results given sound power level from IEC 61400-11 and propagation consistent with ISO 9613-2 are typically utilized. Nonetheless, standardization of predictions is anticipated to result in a robust and repeatable process that increases regulatory confidence and understanding. American Clean Power (ACP) is recognized by the American National Standards Institute (ANSI) as an Accredited Standards Developer. A wind turbine sound modeling standard working group was established and reached consensus on a preferred method of p
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Standard ISO 9613 Part 2"

1

Brezovnik, Boštjan, Istvan Hoffman, and Jarosław Kostrubiec, eds. Local Self-Government in Europe. Institute for Local Self-Government Maribor, 2021. http://dx.doi.org/10.4335/978-961-7124-00-2.

Full text
Abstract:
The local governance and municipalities have always been an important system of the national administrative systems. Therefore, their analysis has had a long tradition in the European social sciences. The different regulations on the municipal administration have been compared by the books, but the approach has been changed by the evolvement of the administrative sciences: comparative local governance and the comparison of the different local socio-economic systems became recent topics of the monographs. 13 municipal systems are analysed by this book. Countries from all part of the European Un
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Standard ISO 9613 Part 2"

1

"Key Messages from Part 2." In ISO 9000 Quality Systems Handbook - updated for the ISO 9001:2008 standard. Routledge, 2009. http://dx.doi.org/10.4324/9780080958033-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

HOYLE, D. "Key messages Key Messages from Part 2." In ISO 9000 Quality Systems Handbook - updated for the ISO 9001:2008 standard. Elsevier, 2009. http://dx.doi.org/10.1016/b978-1-85617-684-2.00046-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

HOYLE, D. "Key Messages Key Messages from Part 6." In ISO 9000 Quality Systems Handbook - updated for the ISO 9001:2008 standard. Elsevier, 2009. http://dx.doi.org/10.1016/b978-1-85617-684-2.00054-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

HOYLE, D. "Part 2 Approaches to Achieving, Sustaining and Improving Quality." In ISO 9000 Quality Systems Handbook - updated for the ISO 9001:2008 standard. Elsevier, 2009. http://dx.doi.org/10.1016/b978-1-85617-684-2.00045-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nordberg Ragnar. "Policy Management and Access Control in Practice." In Studies in Health Technology and Informatics. IOS Press, 2004. https://doi.org/10.3233/978-1-60750-946-2-428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tong, Carrison K. S., and Eric T. T. Wong. "Information Security Management in Picture Archiving and Communication Systems for the Healthcare Industry." In Encyclopedia of Multimedia Technology and Networking, Second Edition. IGI Global, 2009. http://dx.doi.org/10.4018/978-1-60566-014-1.ch092.

Full text
Abstract:
Like other information systems in banking and commercial companies, information security is also an important issue in the health care industry. It is a common problem to have security incidences in an information system. Such security incidences include physical attacks, viruses, intrusions, and hacking. For instance, in the USA, more than 10 million security incidences occurred in the year 2003. The total loss was over $2 billion. In the health care industry, damages caused by security incidences could not be measured only by monetary cost. The trouble with inaccurate information in health c
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Standard ISO 9613 Part 2"

1

Rippon, I. J. "A New Standard and State of the Art Report from TG169 Cathodic Protection in Seawater." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06101.

Full text
Abstract:
Abstract TG169 “Cathodic Protection in Seawater” technical committee has two assignments, to review the application and potential changes to ISO 15589-2 Petroleum and Natural Gas Industries—Cathodic Protection of Pipeline Transportation Systems and to write a committee report on offshore pipeline CP: electrical isolation/continuity and coating issues. Two new NACE documents have been issued in the last year under TG169 to meet these assignments. A modified adoption of “ISO 15589-2 Cathodic protection of pipeline transportation systems - Part 2: Offshore Pipelines”, was issued, making this a NA
APA, Harvard, Vancouver, ISO, and other styles
2

Eliassen, Svein, Nils Olav Ågotnes, and Trond Hagland. "New Design Criteria for Cathodic Protection of Submarine Pipelines." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06180.

Full text
Abstract:
Abstract An introduction to the new ISO standard 155889-2 is presented (1). A more detailed review will be given to the background for selection of parameters such as: Protection potentials for CRA materialsTemperature effects of protection potentialsCurrent density requirementsCoating breakdown factors The second part of the paper will present the practical application of the new criteria for largest submarine pipeline ever been installed from gas fields in the Norwegian Sea to the UK marked.
APA, Harvard, Vancouver, ISO, and other styles
3

Rizzo, Riccardo, Bjarte Lillebø, Stefan Marion, Erik Krogstad Sverre, Mads Arild Eidem, and Karl Gunnar Solheim. "The Effect of Reeling on the Qualification of CRA Lined and Clad Pipes According to NACE MR0175/ISO 15156-3: a Methodology to Qualify Reeled Pipelines." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-18919.

Full text
Abstract:
Abstract The use of carbon steel pipelines lined or clad with corrosion resistant alloys (CRAs) is increasing in the oil and gas (O&G) industry. These pipelines combine the mechanical properties of carbon steel with the corrosion resistance of CRAs. Some CRAs such as AISI 316L (UNS 31603) are not pre-qualified according to ANSI/NACE MR0175/ISO 15156 part 3. A note in table A.2 of the standard specifies that AISI 316L (UNS 31603) “shall be free from cold work caused by shaping, forming, cold reducing, tension, expansion, etc. after the final solution annealing and quenching treatment”. Duri
APA, Harvard, Vancouver, ISO, and other styles
4

Cassagne, Thierry, Gregory Moulié, and Claude Duret. "Limits of Use of Low Alloy and Stainless Steels in Upstream Sour Environments." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09079.

Full text
Abstract:
Abstract Currently the use of sour service metallic materials is guided by ISO 15156/NACE MR0175 standard and guideline documents such EFC N°16 and 17. Carbon and low alloy steels are used according to the sulfide stress cracking (SSC) severity diagram in ISO 15156-2. However, there is a zone in the lower left hand corner which is undefined so far. Hence, the severity is unknown and qualification may need to be specifically carried out for using steels under these conditions. Work has been undertaken to test several steels of known sour service resistance to better assess the severity in this
APA, Harvard, Vancouver, ISO, and other styles
5

Thebault, Florian, Laurent Lamps, Laurent Ladeuille, and Harold Evin. "Qualification of Seamless X60QOS and X65QOS Line Pipe Grades for Extreme Sour Service Conditions with Partial Pressure of H2S beyond 1 Bar." In MPWT 2019. NACE International, 2019. https://doi.org/10.5006/mpwt19-15127.

Full text
Abstract:
Abstract Seamless X60QOS and X65QOS line pipes are widely used for offshore and onshore Sour Service applications. Sour Service refers to the risk of hydrogen related cracking as Sulfide Stress Cracking (SSC). The International standard (NACE MR0175 / ISO 15156) provides requirements for assessing the resistance to SSC, specifically on how to qualify for use in region 3 of the environmental severity diagram (Figure 1 in paragraph 7.2.1.2 of part 2). It is requested to expose materials in an acid solution saturated by 1 bar of H2S (NACE TM0177 Solution A) and to apply a tensile stress above 80%
APA, Harvard, Vancouver, ISO, and other styles
6

Thebault, Florian, Laurent Ladeuille, Laurent Lamps, and Harold Evin. "Qualification of Seamless X60QOS and X65QOS Linepipe Grades for Extreme Sour Service Conditions with Partial Pressure of H2S beyond 1 Bar." In CORROSION 2020. NACE International, 2020. https://doi.org/10.5006/c2020-14585.

Full text
Abstract:
Abstract Seamless X60QOS and X65QOS linepipes are widely used for Sour Service offshore and onshore applications. Sour Service refers to the risk of hydrogen related cracking, such as by Sulfide Stress Cracking (SSC). The International standard NACE MR0175 / ISO 15156 provides requirements for assessing the resistance to SSC, specifically on how to qualify for use in region 3 of the environmental severity diagram (Figure 1 in paragraph 7.2.1.2 of part 2). Qualification requires exposing materials in an acid solution saturated by 1 bar of H2S (NACE TM0177 Solution A) and to apply a tensile stre
APA, Harvard, Vancouver, ISO, and other styles
7

Kirkemo, Finn, Per Osen, Erling Katla, Anthony Muff, Arve Tvitekkja, and Hussain Hashemizadeh. "New Edition of the NORSOK U-001 for Subsea Production Systems." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63554.

Full text
Abstract:
NORSOK U-001 4th edition was released October 1st, 2015. It replaces edition 3 from 2002. The 4th edition is based on industry experience and use of the previous version. With focus on Norwegian Continental Shelf (NCS) operations and experience, NORSOK U-001 provides normative reference and amendments to selected parts of ISO 13628 (equivalent to API 17 series). The focus areas of this paper are the informative annexes to NORSOK U-001: The revised Annex A (informative), and the new Annex B (informative). These annexes provide NCS related amendments to Part 4 (API 17D), Part 7 (API 17G), and Pa
APA, Harvard, Vancouver, ISO, and other styles
8

Kim, Injoong, Manas Bajaj, Nsikan Udoyen, Greg Mocko, Russell Peak, and Miyako Wilson. "Metrics for Degree-of-Openness of Engineering Information: Recognizing the Value of Standards-Based PLM — Part 2." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84791.

Full text
Abstract:
Over a product lifecycle, many engineering tools are used to create computer-based models that need to interact. This poses interoperability problems because of the conflicting formats of the models and differing scopes of the tools. One proposed solution is an open standards-based product lifecycle management (PLM) framework. However, the use of open standards is hindered by the lack of knowledge regarding their actual and potential usage in current engineering processes. To overcome this hurdle and evaluate the opportunities and extent to which open standards can be used in such PLM framewor
APA, Harvard, Vancouver, ISO, and other styles
9

Böhme, D., and R. Huber. "Possibilities for Qualification and Certification of Personnel, Companies and QM-Systems in the Field of Thermal Spraying." In ITSC2007, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p1160.

Full text
Abstract:
Abstract In the thermal spraying technology a lot of things have been and still are happening in education and training of personnel and in quality management. The QM-system that was established by the GTS e.V.– the Association of Thermal Sprayers – was pioneer and does an excellent job concerning its requirements. These GTS QM-requirements are meanwhile completed by newly created and internationally accepted EWF-education and training guidelines of supervising personnel and thermal spray workers. These guidelines involve also the new ISO standards of the Thermal Spraying Coordinator and the A
APA, Harvard, Vancouver, ISO, and other styles
10

Vavalle, Nicholas A., Daniel P. Moreno, Joel D. Stitzel, and F. Scott Gayzik. "Application of a Standard Quantitative Comparison Method to Assess a Full Body Finite Element Model in Frontal Impact." In ASME 2013 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/sbc2013-14787.

Full text
Abstract:
Advanced human body finite element models (FEMs) are gaining popularity in the study of injury biomechanics [1, 2]. FEMs must be validated to ensure that model outputs correspond to experimentally-observed phenomena. During the validation process researchers often qualitatively compare the model response to a laboratory experiment. However, a more rigorous approach is to use quantitative methods. Often, these methods attempt to parse the error contributions of phase, magnitude, and a shape factor. The purpose of this study is to apply one such method for validation quantification, called the e
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Standard ISO 9613 Part 2"

1

Walker, Michael, Gill Holcombe, Clare Mills, Chiara Nitride, and Adrian Rogers. Development of Reference Materials for food allergen analysis. Food Standards Agency, 2023. http://dx.doi.org/10.46756/sci.fsa.hwt621.

Full text
Abstract:
Food hypersensitivity is an increasing problem for many stakeholders with much effort focused on assessment and management of the risks including risk assessment toolkits (for example, the Allergen Bureau (Opens in a new window) Voluntary Incidental Trace Allergen Labelling VITAL®, the iFAAM consortium (Opens in a new window) and the ILSI-Europe Allergen Quantitative Risk Assessment guidance (Opens in a new window)). These toolkits describe the use of action levels and reference doses to assess the risks. A combination of the estimated eliciting dose of allergenic food, (in milligrams as prote
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Standard ISO 9613 Part 2' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography