Log in

Relevant bibliographies by topics / Standard Varnish Work / Journal articles

To see the other types of publications on this topic, follow the link: Standard Varnish Work.

Journal articles on the topic 'Standard Varnish Work'

Author: Grafiati

Published: 28 July 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 15 journal articles for your research on the topic 'Standard Varnish Work.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Qi, Lin, Chen-Yu Guo, Meng-Ge Huang Fu, et al. "Enhancement of Solvent Resistance of Polyimide Electrospun Mat via the UV-Assisted Electrospinning and Photosensitive Varnish." Polymers 11, no. 12 (2019): 2055. http://dx.doi.org/10.3390/polym11122055.

Full text

Abstract:

A new methodology for enhancing the solvent resistance of electrospun polyimide (PI) ultrafine fibrous mat (UFM) was investigated in the current work. For this purpose, a negative intrinsically photosensitive polyimide (PSPI) resin was prepared by the one-step high- temperature polycondensation procedure from 3,3’,4,4’-benzophenonetetracarboxylic dianhydride (BTDA) and α,α-bis(4-amino-3,5-dimethylphenyl)phenylmethane (PTMDA). The PI varnish, by dissolving the derived PI (BTDA-PTMDA) resin in N,N-dimethylacetamide (DMAc) at a solid of 20 wt %, was used as the starting material for the standard

APA, Harvard, Vancouver, ISO, and other styles

2

Kong, Xian Chao, Jia Liu, Min Xu, and Jian Li. "The Impact of Growing Environment on the Organ Development of White Mice." Advanced Materials Research 183-185 (January 2011): 176–79. http://dx.doi.org/10.4028/www.scientific.net/amr.183-185.176.

Full text

Abstract:

This essay has applied 6 kinds of different materials, studied the impact of white mice’s growth and their organ development in the feeding boxes which are made of 6 kinds of different materials, such as red-pine plain board, red-pine painted board, veneer particle board, ordinary particle board, formaldehyde painted particle board, and plastic. Discover the indoor microenvironment to be fit for the growth of white mice through dissection, determination and comparative analysis of organ weights. The result indicates that white mice are living in the feeding box made of red-pine plain board who

APA, Harvard, Vancouver, ISO, and other styles

3

Пласкеева, Е. И., Д. А. Полянская, В. И. Трусов, Р. С. Ходжаев, and Г. В. Черкаев. "Atmospheric resistance coating systems for shipboard yard." MORSKIE INTELLEKTUAL`NYE TEHNOLOGII), no. 1(51) (March 5, 2021): 75–78. http://dx.doi.org/10.37220/mit.2021.51.1.028.

Full text

Abstract:

Предметом исследования является фосфатирующий состав «НОТЕХ». Это цинкфосфатный водный материал с неорганическими ингибиторами коррозии анодного типа, которые эффективно подавляют развитие подпленочной коррозии под слоем грунта. Механизм действия и исследования эффективности подавления коррозии фосфатирующего состава «НОТЕХ» проводилась с отечественными лакокрасочными материалами типа грунта ЭФ-065 и эмали ЭП-1236. Цель работы – обоснование системы покрытия с химической подготовкой поверхности под окраску. Предложена универсальная атмосферостойкая система лакокрасочного покрытия повышенной над

APA, Harvard, Vancouver, ISO, and other styles

4

Melnikov, M. M., Yu V. Prykina, and Yu Zh Vagapova. "Estimation of the repeatability and reproducibility of test results in determining the degree of cure of protective paint coatings using differential scanning calorimetry." Industrial laboratory. Diagnostics of materials 90, no. 3 (2024): 39–44. http://dx.doi.org/10.26896/1028-6861-2024-90-3-39-44.

Full text

Abstract:

The degree of curing of protective paint-and-varnish coatings for oil country tubular goods is a parameter characterizing the completeness of their polymerization, and allows drawing a conclusion about the final physicomechanical properties and the possibility of using the material under specific conditions. This parameter is considered decisive in conducting acceptance tests and incoming quality control of pipe products with plated protective epoxy coatings despite a low accuracy of the obtained results and the impact of various instrumental factors and methodological approaches. The authors

APA, Harvard, Vancouver, ISO, and other styles

5

Rahman, Muhammad Fikri Maulidi, Muhammad Faisal Mahdie, and Gusti Abdul Rahmat Thamrin. "EFEKTIVITAS DAN EFISIENSI MESIN PRODUKSI WOOD CARPET DI PT SARIKAYA SEGA UTAMA KELURAHAN LANDASAN ULIN TENGAH BANJARBARU KALIMANTAN SELATAN." Jurnal Sylva Scienteae 4, no. 4 (2021): 655. http://dx.doi.org/10.20527/jss.v4i4.3946.

Full text

Abstract:

This research aims to analyze the effectiveness and efficiency percentage of production machinery in wood carpet industry at Sarikaya Sega Utama Company. Primary data collection obtained by observation about the stage of production flow from the production machine work and a short interview to the company employees on the production process whereas, secondary data is obtained by studying the study of libraries from several related references. The research Data uses the OEE method analysis (Overal Equipment Effectiveness) and is analyzed descriptively in the form of tables and graph calculation

APA, Harvard, Vancouver, ISO, and other styles

6

Segundo, Alan K. Rêgo, José H. Martins, Paulo M. de B. Monteiro, Rrubens A. de Oliveira, and Delly Oliveira Filho. "Development of capacitive sensor for measuring soil water content." Engenharia Agrícola 31, no. 2 (2011): 260–68. http://dx.doi.org/10.1590/s0100-69162011000200006.

Full text

Abstract:

The irrigation management based on the monitoring of the soil water content allows for the minimization of the amount of water applied, making its use more efficient. Taking into account these aspects, in this work, a sensor for measuring the soil water content was developed to allow real time automation of irrigation systems. This way, problems affecting crop yielding such as irregularities in the time to turn on or turn off the pump, and excess or deficit of water can be solved. To develop the sensors were used stainless steel rods, resin, and insulating varnish. The sensors measuring circui

APA, Harvard, Vancouver, ISO, and other styles

7

Soćko, Renata. "Tetrachloroethene. Documentation of proposed values of occupational exposure limits (OELs)." Podstawy i Metody Oceny Środowiska Pracy 35, no. 4(102) (2019): 111–51. http://dx.doi.org/10.5604/01.3001.0013.6379.

Full text

Abstract:

etrachloroethene is a colorless, volatile liquid used as a chlorinated solvent in chemical laundries, in metal, machine, aerospace and paint and varnish removers. It is an intermediate for the synthesis of chemical compounds. It has found use as a medium in heat exchangers, in veterinary medicine and for disinfection of grain by fumigation. The production volume of tetrachloroethene in the EU is 100,000–1,000,000 t / year. The monograph along with the proposed hygiene standard for tetrachloroethene was re-developed due to the setting of a new limit value in biological material (BLV) in SCOEL,

APA, Harvard, Vancouver, ISO, and other styles

8

Pereira dos Santos Lima, Giovana, Sonia Ait-Amar, Gabriel Velu, et al. "Performance Analysis Based on Thermal Aging Tests of Sol-Gel and Polymer Insulated Wires by Enameling and Extrusion Technology." Energies 15, no. 14 (2022): 5164. http://dx.doi.org/10.3390/en15145164.

Full text

Abstract:

This research activity aims to evaluate electrical insulation system (EIS) intended for electrical machine winding wires. The evaluation is based on mechanical, thermal, and electrical properties tests following international standards for enameled wires. Dielectric parameters such as dissipation factor, partial discharge inception voltage (PDIV), parallel capacitance, and parallel resistance behavior of different insulator configurations on twisted-pair samples are observed during thermal aging tests. Those configurations are formed of different combinations of dielectric layers based on conv

APA, Harvard, Vancouver, ISO, and other styles

9

Abrashov, A. A., E. A. Zheludkova, A. A. Petrushina, et al. "Protective conversion nanocoatings for hot-dip galvanized steel." Practice of Anticorrosive Protection 28, no. 3 (2023): 7–17. https://doi.org/10.31615/j.corros.prot.2023.109.3-1.

Full text

Abstract:

Over the course of this work, the physicochemical and mechanical properties of coatings were investigated in order to find good alternatives to chromate coatings. It was found that zirconium- as well as cerium- and lanthanum-containing coatings are able to withstand exposure to both high and low temperatures without the degradation of their protective characteristics. It was established that the thickness of the zirconium[1]containing coatings amounts to 170 nm, whereas the thickness of the cerium- and lanthanum-containing coatings is 210 nm. It should be noted that the thickness of the chroma

APA, Harvard, Vancouver, ISO, and other styles

10

Gao, Yan-shuang, Xi Ren, Xuan-zhe Du, et al. "Formation of Nano-Fibrous Patterns on Aluminum Substrates via Photolithographic Fabrication of Electrospun Photosensitive Polyimide Fibrous Membranes." Nanomaterials 12, no. 16 (2022): 2745. http://dx.doi.org/10.3390/nano12162745.

Full text

Abstract:

The formation of polymeric micro-patterns on various substrates via a photolithography procedure has been widely used in semiconductor fabrication. Standard polymer patterns are usually fabricated via photosensitive polymer varnishes, in which large amounts of potentially harmful solvents with weight ratios over 50 wt% have to be removed. In the current work, a novel pattern-formation methodology via solvent-free electrospun photosensitive polymeric fibrous membranes (NFMs) instead of the conventional photosensitive solutions as the starting photoresists was proposed and practiced. For this pu

APA, Harvard, Vancouver, ISO, and other styles

11

de Souza, Danilo Ferreira, Francisco Antônio Marino Salotti, Ildo Luís Sauer, Hédio Tatizawa, Aníbal Traça de Almeida, and Arnaldo Gakiya Kanashiro. "A Performance Evaluation of Three-Phase Induction Electric Motors between 1945 and 2020." Energies 15, no. 6 (2022): 2002. http://dx.doi.org/10.3390/en15062002.

Full text

Abstract:

In the late 19th century, the three-phase induction motor was the central element of productivity increase in the second industrial revolution in Europe and the United States. Currently, it is the main load on electrical systems in global terms, reaching approximately 70% of electrical energy consumption in the industrial sector worldwide. During the 20th century, electric motors underwent intense technological innovations that enabled significant performance gains. Thus, this work analyses the performance changes in squirrel-cage rotor three-phase induction electric motors (SCIMs) with mechan

APA, Harvard, Vancouver, ISO, and other styles

12

Korolchenko, O. N., S. G. Tsarichenko, and N. I. Konstantinova. "Flammability properties of fire-retardant timber." Pozharovzryvobezopasnost/Fire and Explosion Safety 30, no. 2 (2021): 23–34. http://dx.doi.org/10.22227/pvb.2021.30.02.23-34.

Full text

Abstract:

Introduction. At present, the house-building industry, that produces timber structures, is in the process of sufficiently intensive development; however, high flammability of wood is the factor that restrains widespread use of timber in construction. The purpose of this work is to optimize the conditions of application of fire-retardant timber in the construction industry. The co-authors believe that the following problems are to be solved to attain this objective:● a comparative analysis of the fireproofing efficiency of several fire-proofing agents applied to different species of wood;● dete

APA, Harvard, Vancouver, ISO, and other styles

13

Basri, Efrida, Resa Martha, Ratih Damayanti, Istie Rahayu, Wayan Darmawan, and Philippe Gérardin. "Durability and wettability of varnishes on the modified and aged surfaces of short rotation teak wood." Pigment & Resin Technology, December 27, 2022. http://dx.doi.org/10.1108/prt-09-2022-0110.

Full text

Abstract:

Purpose The surface characteristics of thermally and chemically modified wood, such as surface roughness, surface free energy (SFE) and wettability, are important properties that influence further manufacturing processes such as gluing and coating. The aim of this paper was to determine the influence of the surface roughness of thermally and chemically modified teak wood on their SFE, wettability and bonding quality for water-based acrylic and solvent-based alkyd varnishes. In addition, durability against subterranean termites in the field of these modified teak woods was also investigated to

APA, Harvard, Vancouver, ISO, and other styles

14

Pisarska, Anna. "4. 1-Etylo-2-pirolidon. Metoda oznaczania w powietrzu na stanowiskach pracy z zastosowaniem chromatografii gazowej." Podstawy i Metody Oceny Środowiska Pracy 38, no. 2 (2022). http://dx.doi.org/10.54215/pimosp/4.112.2022.

Full text

Abstract:

1-Ethyl-2-pyrrolidone (NEP) is a colorless liquid with ammonia-like odor. It belongs to the organic compounds from the lactam group, i.e., the ethyl derivative of 2-pyrrolidone. 1-Ethyl-2-pyrrolidone, due to similar physicochemical proper-ties, is used in industry as a substitute for 1-methyl-2-pyrrolidone (NMP). It is used as a solvent in polymer, petroche-mical, paint and varnish, and electronic industries. Moreover, it has been used as a cleaning agent for removing paints, varnishes, adhesives, oil or grease. 1-Ethyl-2-pyrrolidone can be absorbed through the skin as well as through inhalati

APA, Harvard, Vancouver, ISO, and other styles

15

Rahman, Mohmin. "Is Straight the New Queer?" M/C Journal 7, no. 5 (2004). http://dx.doi.org/10.5204/mcj.2446.

Full text

Abstract:

He is, surely, the only heterosexual male in the country who could get away with being photographed half-naked and smothered in baby oil for GQ and still come over as an icon of masculinity. (GQ October 2002. Article on Beckham as GQ’s Sportsman of the Year, 264) Indeed. Let us tear our thoughts away from the image of David basted in oil and consider the extract as one of innumerable examples of the media fascination with Beckham. Given his penetration in Europe, Asia, Latin America and Africa, we can take as self-evident that Beckham is a quantifiably significant figure in contemporary global

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!