Relevant bibliographies by topics / Static and dynamic creep tests

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Static and dynamic creep tests'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Static and dynamic creep tests.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Static and dynamic creep tests"

1

Mackiewicz, Piotr, and Antoni Szydło. "Viscoelastic Parameters of Asphalt Mixtures Identified in Static and Dynamic Tests." Materials 12, no. 13 (2019): 2084. http://dx.doi.org/10.3390/ma12132084.

Full text
Abstract:
We present two methods used in the identification of viscoelastic parameters of asphalt mixtures used in pavements. The static creep test and the dynamic test, with a frequency of 10 Hz, were carried out based on the four-point bending beam (4BP). In the method identifying viscoelastic parameters for the Brugers’ model, we included the course of a creeping curve (for static creep) and fatigue hysteresis (for dynamic test). It was shown that these parameters depend significantly on the load time, method used, and temperature and asphalt content. A similar variation of parameters depending on te
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Liding, Chunli Wu, Yongchun Cheng, Yongming Ai, He Li, and Xiaoshu Tan. "Comparative Analysis of Viscoelastic Properties of Open Graded Friction Course under Dynamic and Static Loads." Polymers 13, no. 8 (2021): 1250. http://dx.doi.org/10.3390/polym13081250.

Full text
Abstract:
The viscoelastic properties of open graded friction course (OGFC) are closely related to anti-permanent deformation ability, noise reduction ability and durability. To study the viscoelastic parameters of OGFC under dynamic and static loads and to establish the functional relationship between them, uniaxial compression creep tests and dynamic modulus tests were performed to obtain the creep compliance and the dynamic modulus of OGFC. In addition, the Burgers model, modified Burgers model, second-order extensive Maxwell model, Scott-Blair model and modified Sigmoid model were employed to quanti
APA, Harvard, Vancouver, ISO, and other styles
3

Sun, Yi Han, Shao Peng Wu, Ji Qing Zhu, and Jin Jun Zhong. "Investigation on Static Shear Creep Behavior of Asphalt Mastic Containing Recycled Red Brick Powder." Advanced Materials Research 306-307 (August 2011): 1707–11. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.1707.

Full text
Abstract:
The static shear creep behavior of asphalt mastic containing recycled red brick powder (RBP) is investigated in this paper. The used mastic consists of asphalt and filler at a mass ratio of 1:1. Dynamic Shear Rheometer (DSR) performed the static shear creep tests at 0°C. The static shear creep behavior of RBP asphalt mastic was analyzed and modeled based on Burgers model. It is concluded that the introduction of RBP results in smaller deformation, higher static shear creep stiffness modulus of asphalt mastic at 0°C. It was also indicated that Burgers model can well explain the static shear cre
APA, Harvard, Vancouver, ISO, and other styles
4

Stelzer, D., and O. B. Andersland. "Creep Parameters for Pile Settlement Equations." Journal of Energy Resources Technology 111, no. 4 (1989): 258–63. http://dx.doi.org/10.1115/1.3231434.

Full text
Abstract:
Friction pile settlement in frozen ground is tyically predicted on the basis of a creep equation relating shear stresses at the soil/pile interface to pile displacement rates. Creep parameters are used to characterize soil type, soil/ice structure, temperature, and loading conditions. Experimental tests involving model steel piles embedded in frozen sand provided data showing that change in a given test variable can alter the numerical value for some of the creep parameters. The test variables included static, incremental, and dynamic loading; pile surface roughness; soil ice content; and sand
APA, Harvard, Vancouver, ISO, and other styles
5

Khiavi, Alireza Khavandi, and Saeed Mansoori. "The performance of hot mix asphalt in dynamic and static creep tests." Petroleum Science and Technology 35, no. 15 (2017): 1627–34. http://dx.doi.org/10.1080/10916466.2017.1336773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Modigell, Michael, and M. Hufschmidt. "Dynamic and Static Yield Stress of Metallic Suspensions." Solid State Phenomena 116-117 (October 2006): 587–90. http://dx.doi.org/10.4028/www.scientific.net/ssp.116-117.587.

Full text
Abstract:
Oscillation experiments, creep tests and shear stress ramps have been performed to analyze the yield stress and its time dependency. It has to be distinguished between iso-structural, dynamic and static yield stress. The iso-structural yield stress occurs immediately after shearing. Since the slurry structure remains unchanged, it is equivalent to the structure during shearing. At rest an internal structure builds up, this leads to an increase of the yield stress, which is referred to as the dynamic yield stress. It increases until its maximum value, the static yield stress, is reached.
APA, Harvard, Vancouver, ISO, and other styles
7

Minhas, Zill-e. Hasnain, and Sun Qin. "Computation and Comparison of Dynamic Viscosity Based on Quasi-Static and Dynamic FEM Analysis for AL7050-T7451." Applied Mechanics and Materials 313-314 (March 2013): 1046–50. http://dx.doi.org/10.4028/www.scientific.net/amm.313-314.1046.

Full text
Abstract:
Coefficients of dynamic viscosity for AL7050-T7451 at room temperature is extracted by creep and stress relaxation simulations in Ansys. An analogy has been established for both creep and stress relaxation, with simple Maxwell Model. The stress relaxation curve thus obtained is then used to generate the Prony series coefficients which are then used to run some dynamic analysis in Ansys to see the effect of loading at different frequencies on the value of η (i.e dynamic viscosity). This will be verified with the simple analytical dynamic formulation based on the Maxwell Model. A good agreement
APA, Harvard, Vancouver, ISO, and other styles
8

Irfan, M., Y. Ali, S. Iqbal, S. Ahmed, and I. Hafeez. "Rutting Evaluation of Asphalt Mixtures Using Static, Dynamic, and Repeated Creep Load Tests." Arabian Journal for Science and Engineering 43, no. 10 (2017): 5143–55. http://dx.doi.org/10.1007/s13369-017-2982-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Hui, Ying She Luo, Jian Jun Xie, and Sheng Ming Chen. "Research on Rheological Properties of Room-Temperature Curing Epoxy Adhesive." Advanced Materials Research 639-640 (January 2013): 354–58. http://dx.doi.org/10.4028/www.scientific.net/amr.639-640.354.

Full text
Abstract:
The rheological mechanical properties of two kinds of self-designed epoxy adhesive curing systems were studied in this paper through the dynamic and static thermodynamics instrument named EPLEXOR 500N made by GABO® company in Germany. Short-term creep tests were carried out under three different temperature conditions of 20°C, 30°C and 40°C and the rheological model is developed to describe the materials creep law. In addition, the test results from the two different epoxy adhesive are also compared and analyzed.
APA, Harvard, Vancouver, ISO, and other styles
10

Bank, L. C., E. Cofie, and T. D. Gerhardt. "A New Test Method for the Determination of the Flexural Modulus of Spirally Wound Paper Tubes." Journal of Engineering Materials and Technology 114, no. 1 (1992): 84–89. http://dx.doi.org/10.1115/1.2904146.

Full text
Abstract:
A new static test method to determine the flexural modulus of spirally wound paper tubes is described. The experimental method is based on the standard three-point-bend procedure. The method requires testing the tube at multiple (two or more) span lengths. The testing can be performed on either a rigid frame fixture under constant static load or in a universal testing machine under monotonically increasing quasi-static load. The test data are analyzed with a modified form of a classical Euler-Bernoulli beam theory. The modified theory accounts for nonbending deflection components that are obta
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Static and dynamic creep tests"

1

NG, Andressa Ka Yan. "Contribuição ao estudo da deformação permanente de misturas asfálticas densas à luz de ensaios de fluência por compressão uniaxial estática e dinâmica." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/18/18143/tde-25032013-150426/.

Full text
Abstract:
Esta dissertação apresenta um estudo da deformação permanente de misturas asfálticas à luz dos resultados de ensaios de fluência por compressão uniaxial estática e dinâmica. Para isso, um programa experimental completo foi desenvolvido combinando fatores relacionados às misturas asfálticas e às condições de ensaio. Foram produzidos corpos de prova de misturas asfálticas densas tipo CAUQ com asfalto convencional (CAP 50/70) e com asfalto modificado com polímero SBS (CAP 50/70+SBS), variando o volume de vazios em dois níveis, 4 e 7
APA, Harvard, Vancouver, ISO, and other styles
2

Soares, Jéssica Santiago. "Investigação da relação entre parâmetros da compactação giratória e de deformação permanente em misturas asfálticas densas." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/18/18143/tde-15122014-163104/.

Full text
Abstract:
Esta pesquisa tem como objetivo estudar a relação entre parâmetros de compactação e de deformação permanente à luz dos ensaios de compactação giratória Superpave ® e de ensaios de compressão uniaxial estática e dinâmica. Foram estudadas 8 misturas asfálticas com a mesma granulometria (Faixa C) e tipo de agregado mineral (granito) porém variou-se o ligante asfáltico (CAP 50/70 e CAP 50/70+SBS), o volume de vazios (4% e 7%) e a adição de cal hidratada. A partir dos resultados do ensaio de compactação observou-se que a inclinação das curvas de compactação das misturas compactadas a 7% for
APA, Harvard, Vancouver, ISO, and other styles
3

Leite, Nelson Paiva Oliveira, and Fernando Walter. "STATIC AND DYNAMIC EVALUATION OF A GPS ATTITUDE DETERMINATION SYSTEM BASED ON NON-DEDICATED GPS RECEIVERS." International Foundation for Telemetering, 2006. http://hdl.handle.net/10150/604233.

Full text
Abstract:
ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California<br>For the final evaluation of a GPS attitude determination algorithm, it was determined its true performance in terms of accuracy, reliability and dynamic response. To accomplish that, a flight test campaign was carried out to validate the attitude determination algorithm. In this phase, the measured aircraft attitude was compared to a reference attitude, to allow the determina
APA, Harvard, Vancouver, ISO, and other styles
4

Hamache, Violette. "Dynamic Ground Clearance." Thesis, Linköpings universitet, Mekanik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-93685.

Full text
Abstract:
The purpose of this work is to develop a test method which will consider the variation of the ground clearance when driving, the so-called dynamic ground clearance. This has been done through the analysis of a specific application: the tractors in grain used in Brazil. Series of real life tests are run in order to obtain data on the tire compressions and the suspension travels. The tractor used is a 6x4 and is loaded with a trailer. When investigating critical cases, the minimum dynamic ground clearance is found to be as small as 123 mm at the axle 1, 78 mm at the exhaust outlet, 137 mm at the
APA, Harvard, Vancouver, ISO, and other styles
5

Samuchovas, Andrejus. "Panemunės inžinerinės-geologinės sąlygos. Statinio bei dinaminio zondavimo tyrimo rezultatų analizė." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2006~D_20090908_192055-48536.

Full text
Abstract:
Santrauka Temos aktualumas. Populiariausias Lietuvoje naudojamas būdas stipruminėms grunto savybėms nustatyti yra statinis zondavimas. Tuo tarpu dinaminis zondavimas naudojamas labai retai, dažniausiai tik ten kur neįmanoma atlikti.statinio zondavimo. Tokia situacija susidarė dėl to, kad Lietuvoje nėra metodikos pamatų skaičiavimams pagal qd (dinaminio zondavimo) reikšmes ir projektuotojai nelabai supranta dinaminio zondavimo privalumų. Esant tokiai padėčiai dauguma inžinerinių geologinių tyrimų įmonių qd reikšmes verčia į statinio zondavimo reikšmes qc, nors perėjimo koeficientų iš qd į qc nė
APA, Harvard, Vancouver, ISO, and other styles
6

Katicha, Samer. "Analysis of Hot Mix Asphalt (HMA) Linear Viscoelastic and Bimodular Properties Using Uniaxial Compression and Indirect Tension (IDT) Tests." Diss., Virginia Tech, 2007. http://hdl.handle.net/10919/30036.

Full text
Abstract:
The major Hot-Mix Asphalt (HMA) input for mechanistic-empirical (M-E) flexible pavement design is the dynamic complex modulus obtained from either the uniaxial or triaxial compressive dynamic modulus test. Furthermore, as part of the performance-based mix design process, the triaxial dynamic modulus has been selected to predict rutting and fatigue cracking, and the Indirect Tension (IDT) creep compliance test to predict low-temperature thermal cracking. The creep compliance and dynamic modulus are measured responses (viscoelastic functions) of viscoelastic materials under transient and cycli
APA, Harvard, Vancouver, ISO, and other styles
7

Pruett, Joshua M. "Performance of a Full-Scale Lateral Foundation with Fine and Coarse Gravel Backfills Subjected to Static, Cyclic, and Dynamic Lateral Loads." BYU ScholarsArchive, 2009. https://scholarsarchive.byu.edu/etd/2317.

Full text
Abstract:
Full-scale lateral load tests were performed on a pile cap with five backfill conditions: no backfill, densely compacted fine gravel, loosely compacted fine gravel, densely compacted coarse gravel, and loosely compacted coarse gravel. Static loads, applied by hydraulic load actuators, were followed by low-frequency, actuator-driven cyclic loads as well as higher frequency dynamic loads from an eccentric mass shaker. Passive resistance from the backfill significantly increased the lateral capacity of the pile cap. Densely compacted backfill materials contributed about 70% of the total system re
APA, Harvard, Vancouver, ISO, and other styles
8

Petiot, Guillaume. "Contribution à la vérification de programmes C par combinaison de tests et de preuves." Thesis, Besançon, 2015. http://www.theses.fr/2015BESA2045/document.

Full text
Abstract:
La vérification de logiciels repose le plus souvent sur une spécification formelle encodant les propriétés du programme à vérifier. La tâche de spécification et de vérification déductive des programmes est longue et difficile et nécessite une connaissance des outils de preuve de programmes. En effet, un échec de preuve de programme peut être dû à une non-conformité du code par rapport à sa spécification, à un contrat de boucle ou de fonction appelée trop faible pour prouver une autre propriété, ou à une incapacité du prouveur. Il est souvent difficile pour l’utilisateur de décider laquelle de
APA, Harvard, Vancouver, ISO, and other styles
9

Wade, James. "Contact damage of ceramics and ceramic nanocomposites." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/24932.

Full text
Abstract:
Herein, we study the contact damage performance of two armour ceramics, alumina and silicon carbide, with varying microstructures and one particle-reinforced ceramic nanocomposite, alumina/silicon carbide, in an attempt to understand the microstructural mechanisms that affect plasticity and cracking under quasi-static and dynamic conditions. Quasi-static contact damage was imitated using Vickers indentation over a varying load regime. Numerical analysis of the indentation size effect, performed using the proportional specimen resistance model, allowed the contributions of plastic deformation a
APA, Harvard, Vancouver, ISO, and other styles
10

Khin, Maung Zaw. "REHABILITAION OF MAJOR STEEL BRIDGES IN MYANMAR UNDER SEISMIC RISKS." Kyoto University, 2017. http://hdl.handle.net/2433/228234.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Static and dynamic creep tests"

1

Hahne, David E. Low-speed static and dynamic force tests of a generic supersonic cruise fighter configuration. Langley Research Center, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chan, K. B. Static and dynamic compression tests of filament-wound CFRP and GRP tubes under axial compression. UMIST, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Riggle, Peter. Investigation of axial positioning for flexural compressors: Final technical report. Tri-Cities University Center, University of Washington, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

T, Armer G. S., and O'Dell T, eds. Fire, static, and dynamic tests of building structures: Proceedings of the Second Cardington Conference, Cardington, England, 12-14 March 1996. E & FN Spon, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Collins, J. Scott. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Langley Research Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schuster, D. M. Aerodynamic measurements on a large splitter plate for the Langley Transonic Dynamics Tunnel. National Aeronautics and Space Administration, Langley Research Center, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lee, Hosin David. Validation of the mix design process for cold in-place rehabilitation using foamed asphalt. Public Policy Center, University of Iowa, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Whittenberger, J. Daniel. Mechanical properties of pure nickel alloys after long term exposures to LiOH and vacuum at 775 K. NASA, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Armer, G. s. t. Fire, Static and Dynamic Tests of Building Structures. Taylor & Francis, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

1935-, Adams Donald Frederick, and United States. National Aeronautics and Space Administration., eds. Static tensile and tensile creep testing of five ceramic fibers at elevated temperatures. National Aeronautics and Space Administration, Ames Research Center, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Static and dynamic creep tests"

1

Kanig, Johannes, Rod Chapman, Cyrille Comar, Jerôme Guitton, Yannick Moy, and Emyr Rees. "Explicit Assumptions - A Prenup for Marrying Static and Dynamic Program Verification." In Tests and Proofs. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09099-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kosmatov, Nikolai, and Julien Signoles. "Runtime Assertion Checking and Its Combinations with Static and Dynamic Analyses." In Tests and Proofs. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09099-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Makhlouf, Amani, Hanh Nhi Tran, Christian Percebois, and Martin Strecker. "Combining Dynamic and Static Analysis to Help Develop Correct Graph Transformations." In Tests and Proofs. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41135-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Blatter, Lionel, Nikolai Kosmatov, Pascale Le Gall, Virgile Prevosto, and Guillaume Petiot. "Static and Dynamic Verification of Relational Properties on Self-composed C Code." In Tests and Proofs. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92994-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Hou-Cheng. "Linear Benchmark Tests for Plate Elements." In Static and Dynamic Analyses of Plates and Shells. Springer London, 1989. http://dx.doi.org/10.1007/978-1-4471-1669-1_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Hou-Cheng. "Linear Benchmark Tests for Shell Elements." In Static and Dynamic Analyses of Plates and Shells. Springer London, 1989. http://dx.doi.org/10.1007/978-1-4471-1669-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ernst, Michael D. "How Tests and Proofs Impede One Another: The Need for Always-On Static and Dynamic Feedback." In Tests and Proofs. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13977-2_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sokolow, Adam, and Mike Scheidler. "Analysis and Simulations of Quasi-static Torsion Tests on Nearly Incompressible Soft Materials." In Dynamic Behavior of Materials, Volume 1. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00771-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stańco, M., A. Iluk, and M. Sawicki. "Static and Dynamic Tests of Suspension System Heavy Off-road Vehicle." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-04975-1_87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Huybrechts, Noël, Monika De Vos, Henri de Chaunac, Alain E. Holeyman, and Maurice Bottiau. "Static versus Dynamic Load Tests on Piles in Sand and Chalk." In 10th International Conference on Stress Wave Theory and Testing Methods for Deep Foundations. ASTM International, 2019. http://dx.doi.org/10.1520/stp161120170200.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Static and dynamic creep tests"

1

Li, Yiran, Yuvraj Singh, and Ganesh Subbarayan. "Effect of Static and Dynamic Aging on Fatigue Behavior of Sn3.0Ag0.5Cu Solder Alloy." In ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2017 Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ipack2017-74201.

Full text
Abstract:
In this paper, the effect of pretest isothermal aging and in-test aging on the fatigue behavior of Sn3.0Ag0.5Cu alloy are examined using the microstructurally adaptive creep model (MACM) and the maximum entropy fracture model (MEFM). Compared to traditional constitutive models, the MACM considers the effect of thermal history. Two microstructural parameters, the average Ag3Sn particle size and the average primary-Sn cell size, are identified as critical to capturing the aging behavior of SnAgCu alloys and are incorporated into a modified Dorn creep form. The MEFM is next utilized to characteri
APA, Harvard, Vancouver, ISO, and other styles
2

Hodgins, Micah, Gianluca Rizzello, Alex York, and Stefan Seelecke. "High-Frequency Dynamic Model of a Pre-Loaded Circular Dielectric Electro-Active Polymer Actuator." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3259.

Full text
Abstract:
In this work a high-frequency dynamic model of a pre-loaded circular DEAP actuator is developed and experimentally validated. The model is capable of predicting both the static and dynamic response of the actuator. The static response is modeled based on a free energy approach and consists of an Ogden term representing the elastic energy, and a electrical term representing the electrical-mechanical coupling [1]. The addition of viscoelastic elements (spring-dashpot configurations) enables the model to capture the dynamic response. The Ogden coefficients were first identified through a quasi-st
APA, Harvard, Vancouver, ISO, and other styles
3

Sen, Sounok, John I. Boxberger, Yvonne Schroeder, Alejandro Espinoza Orias, and Dawn M. Elliott. "Effect of Degeneration on the Dynamic Viscoelastic Properties of Human Annulus Fibrosus in Tension." In ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-193057.

Full text
Abstract:
Physiological cyclic loading of the intervertebral disc generally occurs between 1 and 5 Hz [1]. However, most mechanical assessments of disc AF tissue have relied on uniaxial tensile tests under quasi-static conditions [2]. Furthermore, the few studies that have addressed AF viscoelasticity have reported only static viscoelastic properties such as creep or stress-relaxation [3]. As such, there exists almost no data characterizing the dynamic viscoelastic properties of AF tissue in tension. Such data would be critical for several applications: to elucidate the mechanical progression of interve
APA, Harvard, Vancouver, ISO, and other styles
4

Holdermann, Ken, Gayatri Cuddalorepatta, and Abhijit Dasgupta. "Dynamic Recrystallization of Sn3.0Ag0.5Cu Pb-Free Solder Alloy." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67671.

Full text
Abstract:
This study examines microstructural recrystallization in Sn3.0Ag0.5Cu (SAC305) solder joints due to isothermal, mechanical cycling. It is well known that after reflow SAC solder joints at length scales of 200 μm consist of only a few grains [1–3]. This coarse microstructure makes the joint mechanically inhomogeneous and anisotropic, and non-repeatable. Creep tests conducted on modified lap-shear SAC305 solder joints therefore show significant scatter in their results, because of piece-to-piece variability in the microstructural morphology [1]. However, results of cyclic fatigue tests of the sa
APA, Harvard, Vancouver, ISO, and other styles
5

Di Lorenzo, Salvatore, Francesco P. Pinnola, and Antonina Pirrotta. "On the Dynamics of Fractional Visco-Elastic Beams." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86566.

Full text
Abstract:
With increasing advanced manufacturing process, visco-elastic materials are very attractive for mitigation of vibrations, provided that you may have advanced studies for capturing the realistic behavior of such materials. Experimental verification of the visco-elastic behavior is limited to some well-known low order models as the Maxwell or Kelvin models. However, both models are not sufficient to model the visco-elastic behavior of real materials, since only the Maxwell type can capture the relaxation tests and the Kelvin the creep tests, respectively. Very recently, it has been stressed that
APA, Harvard, Vancouver, ISO, and other styles
6

Džugan, Jan, Pavel Konopik, Martin Rund, and Radek Prochazka. "Determination of Local Tensile and Fatigue Properties With the Use of Sub-Sized Specimens." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45958.

Full text
Abstract:
Determination of mechanical properties with the use of sub-sized specimens is very important topic nowadays. The use of sub-sized samples can be quite wide in all cases when limited amount of the experimental material is available such as evaluation of residual life of in-service components, properties determination of developed nano-structured materials, assessment of dilatometric samples used for thermal and thermo-mechanical treatment development, local properties of weld joints and so on. Concerning this large application field it would be very useful to prepare standard for small size sam
APA, Harvard, Vancouver, ISO, and other styles
7

Patel, Hinal, Chen Yang, Howon Lee, and Assimina A. Pelegri. "Investigation of Cyclic and Frequency Nanoindentation Effects in Polydimethylsiloxane." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-12187.

Full text
Abstract:
Abstract The nanoindentation response of polydimethylsiloxane (PDMS) is examined using single nanoindentation loading and small-scale fatigue. It is well known that viscoelastic material response is inherently related to the local loading and environmental conditions. First, quasistatic nanoindentation experiments were performed at various depths through the specimen to benchmark our nanoindentation results with literature data. The PDMS cyclic and frequency dependence to quasi-static and dynamic nanoindentation loading was studied and a ‘load/partial-unload’ technique was employed to investig
APA, Harvard, Vancouver, ISO, and other styles
8

San Andre´s, Luis, Thomas Abraham Chirathadam, and Tae-Ho Kim. "Measurement of Structural Stiffness and Damping Coefficients in a Metal Mesh Foil Bearing." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59315.

Full text
Abstract:
Engineered Metal Mesh Foil Bearings (MMFB) are a promising low cost bearing technology for oil-free microturbomachinery. In a MMFB, a ring shaped metal mesh (MM) provides a soft elastic support to a smooth arcuate foil wrapped around a rotating shaft. The paper details the construction of a MMFB and the static and dynamic load tests conducted on the bearing for estimation of its structural stiffness and equivalent viscous damping. The 28.00 mm diameter, 28.05 mm long bearing, with a metal mesh ring made of 0.3 mm Copper wire and compactness of 20%, is installed on a test shaft with a slight pr
APA, Harvard, Vancouver, ISO, and other styles
9

Zarzour, Mark, and John Vance. "Experimental Evaluation of a Metal Mesh Bearing Damper." In ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/99-gt-015.

Full text
Abstract:
Metal mesh is a commercially available material used in many applications including seals, heat shields, filters, gaskets, aircraft engine mounts, and vibration absorbers. This material has been tested by the authors as a bearing damper in a rotordynamic test rig. The test facility was originally used to support the design of a turboprop engine, developing squirrel cages and squeeze film dampers for both the gas generator and power turbine rotors. To design the metal mesh damper, static stiffness and dynamic rap test measurements were first made on metal mesh samples in a specially designed no
APA, Harvard, Vancouver, ISO, and other styles
10

Phan, V. T., J. Y. Cognard, and D. Choqueuse. "Experimental Analysis and Modelling of the Thermomechanical Behaviour of Field Joint of Thermally Insulated Pipeline." In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-10054.

Full text
Abstract:
Ultra Deep offshore oil exploitation (down to 3000 meters depth) presents new challenges to offshore engineering and operating companies. Flow assurance and particularly the selection of insulation materials to be applied to pipe lines are of primary importance, and are the focus of much industry interest for deepwater applications. In this field, particular attention is now focussed on the long term behaviour of the assembly between coated field joints and parent coating material which appears to be critical for in-service durability. A field joint is the uncoated area that results when two p
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Static and dynamic creep tests"

1

Fields, R. J., S. R, III Low, and D. E. Harne. Static and dynamic strength tests on electrical conductor cables specified for airport landing structures. National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.ir.88-3884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Static and dynamic creep tests' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography