Log in

Relevant bibliographies by topics / Static and Fatigue analysis / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Static and Fatigue analysis.

Dissertations / Theses on the topic 'Static and Fatigue analysis'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Static and Fatigue analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Al-Azzawi, Ahmad. "Analysis of static and fatigue damage in aluminium/GFRP hybrid composites." Thesis, Cardiff University, 2017. http://orca.cf.ac.uk/106742/.

Full text

Abstract:

This study has focused on investigating the initiation, propagation and effects of damage in fibre-metal laminates (FMLs) specifically Glare® 4B under buckling, postbuckling and high cycle fatigue through the use of novel numerical and experimental techniques. In terms of numerical analysis, a 3D user-defined cohesive zone model (CZM) has been generated to simulate delamination initiation and growth in specimens under static compressive stresses, using the software Abaqus. The generated models have been validated using a comprehensive literature review in order to gather reliable mechanical pr

APA, Harvard, Vancouver, ISO, and other styles

2

Olsson, Andreas, and Joel Sundström. "Fatigue Analysis of Threaded Holes : A project performed at ÅF using static structural analysis in ANSYS." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-206905.

Full text

Abstract:

The effect of a plain hole on the fatigue properties of a body undergoing uniaxial loading is a well-studied area. However, for the case of threaded holes that are not being used together with a bolt, little can be found in the literature. In this project, stress concentration factors, Ktn, for threaded holes, following the ISO metric standard, have been calculated using finite element models in ANSYS. Based on theser esults, estimations of the fatigue notch factor, Ktf , for the threaded holes were derived. The magnitude of Ktf depends on how the notch sensitivity index, q, is being determine

APA, Harvard, Vancouver, ISO, and other styles

3

Karlsson, Hanna. "Static and Fatigue Analyses of Welded Joints in Thin-Walled Tubes." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16779.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Righi, Bento Pereira Rafael. "Dynamic Analysis and Fatigue Assessment of a Jacket-type Offshore Platform." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text

Abstract:

This work aims to evaluate the environmental loads and make the fatigue analysis in a Jacket-type platform situated in the North sea.Under this line of thought. Then, a static and a dynamic fatigue analysis are evaluated and compared.

APA, Harvard, Vancouver, ISO, and other styles

5

Obst, Andreas W. "Nonlinear static and transient analysis of generally laminated beams." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-10102009-020113/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Tsigkourakos, George. "Experimental and numerical analysis of damage in CFRP laminates under static and impact loading conditions." Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/13284.

Full text

Abstract:

Engineering composites and especially long fibre carbon composites have been in high demand not only in aerospace and automotive applications, but also in high end everyday applications. In aerospace, carbon composites are used predominantly for secondary structures attached by joints or fasteners to various alloys or even different composites, and are exposed to service loads and repetitive impacting. Impact fatigue (IF) is not studied adequately for long cycles and relevant literature is investigating mainly drop weight tests and high speed projectile experiments. The main aim of this resear

APA, Harvard, Vancouver, ISO, and other styles

7

Khurshid, Mansoor. "Static and fatigue analyses of welded steel structures : some aspects towards lightweight design." Doctoral thesis, KTH, Lättkonstruktioner, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-200829.

Full text

Abstract:

The objectives of this thesis comprise of overcoming the challenges in designing lightweight welded structures such as material selection, choice of fatigue design methods, and increased performance by using improvement techniques. Material selection of welded joints is dependent on the filler and base material strengths. Partially and fully penetrated cruciform and butt welded joints were designed in under-matching, matching, and over-matching filler materials. Base material steel grades were S600MC, S700MC, and S960. Current design rules are developed for welds in steel up to yield strength

APA, Harvard, Vancouver, ISO, and other styles

8

Djukic, Luke Philip Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Effects of thermal residual stresses on static strength and fatigue life of welded carbon-fibre/epoxy composite joints." Awarded By:University of New South Wales. Mechanical & Manufacturing Engineering, 2010. http://handle.unsw.edu.au/1959.4/44619.

Full text

Abstract:

Thermoset Composite Welding (TCW) is a process designed specifically for joining composite materials, developed by the Cooperative Research Centre for Advanced Composite Structures (CRC-ACS). The TCW manufacture process is carried out at higher temperatures than those used in service, causing thermal residual (TR) stresses to develop in the joints. An investigation of the strength of single-lap shear joints (SLJs), and the development of laminate free edge microcracks (LFEMs) is presented in this thesis. The reported investigations are primarily experimental. Finite element analysis has been u

APA, Harvard, Vancouver, ISO, and other styles

9

Abdelal, Nisrin Rizek. "Effects of Voids on Delamination Behavior Under Static and Fatigue Mode I and Mode II." University of Dayton / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1365418463.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Puigvert, Cobos Francesc. "Analysis of circular bond-type anchorages for prestressing composite rods under quasi-static, fatigue and time-dependent loads." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/284216.

Full text

Abstract:

En estructures pretesades sotmeses a ambients corrosius, s'està estudiant la possibilitat de substituir els tendons d’acer per tendons que no pateixin els efectes de la corrosió. En aquest sentit, els materials compostos Fibre Reinforced Polymer (FRP) són una opció duradora en el disseny d'estructures de formigó pretesat degut a les seves altes propietats mecàniques, pes lleuger i alta resistència a la corrosió. No obstant, un dels reptes associats amb aquesta opció es troba en el desenvolupament d'un sistema d'ancoratge adequat per als tendons de FRP . Per això aquesta investigació ha estu

APA, Harvard, Vancouver, ISO, and other styles

11

Mumtaz, Noman Ali, and Mansoor Khurshid. "Static and fatigue design of load carrying welded joints in high strength steels : -In collaboration with Cargotec Sweden AB." Thesis, KTH, Lättkonstruktioner, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-77517.

Full text

Abstract:

This thesis work is carried out in Cargotec Sweden AB, Bromma Conquip to study the behavior of load carrying welded joints in different weld metal strength mismatch conditions and various penetration ratios. Static and fatigue strength calculations have been made using FEA and experimentation. The joint in the Telescopic beam of the spreader STS45 has been analyzed. Telescopic beam is one of the critical and main parts in the spreader, which is directly subjected to the load of containers at various ports. Previous studies show that this joint limits the strength of the spreader, it has thus b

APA, Harvard, Vancouver, ISO, and other styles

12

Vasudevan, Satish. "AN INVESTIGATION OF QUASI-STATIC BEHAVIOR, HIGH CYCLE FATIGUE AND FINAL FRACTURE BEHAVIOR OFALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 2219." Akron, OH : University of Akron, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=akron1193668130.

Full text

Abstract:

Thesis (M.S.)--University of Akron, Dept. of Mechanical Engineering, 2007.<br>"December, 2007." Title from electronic thesis title page (viewed 02/23/2008) Advisor, T. S. Srivatsan; Faculty readers, Craig Menzemer, Amit Prakash; Department Chair, Celal Batur; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

13

Osborn, Christopher M. "An analysis of the effectiveness of a new watchstanding schedule for U.S. Submariners /." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Sep%5FOsborn.pdf.

Full text

Abstract:

Thesis (M.S. in Operations Research)--Naval Postgraduate School, Sept. 2004.<br>Thesis Advisor(s): Nita Lewis Miller, J. Jeffrey Crowson. Includes bibliographical references (p. 77-79). Also available online.

APA, Harvard, Vancouver, ISO, and other styles

14

Tammas-Williams, Samuel. "XCT analysis of the defect distribution and its effect on the static and dynamic mechanical properties in Ti-6Al-4V components manufactured by electron beam additive manufacture." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/xct-analysis-of-the-defect-distribution-and-its-effect-on-the-static-and-dynamic-mechanical-properties-in-ti6al4v-components-manufactured-by-electron-beam-additive-manufacture(cb034391-b61f-4e16-91cd-7ad3c9ec6312).html.

Full text

Abstract:

Selective electron beam melting (SEBM) is a promising powder bed Additive Manufacturing technique for near-net-shape manufacture of high-value titanium components. An extensive research program has been carried out to characterise in 3D the size, volume fraction, and spatial distribution of the pores in model samples, using X-ray computed tomography (XCT), and correlate them to the SEBM process variables. The average volume fraction of the pores (97.5 %) where fatigue cracks would initiate based on the relative stress intensity factor of all the pores. In contrast, crack growth was found to be

APA, Harvard, Vancouver, ISO, and other styles

15

Lindauer, Jason M. "F/A-18(A-D) wing root Fatigue Life Expended (FLE) prediction without the use of strain gage data." Thesis, Monterey, California : Naval Postgraduate School, 2010. http://edocs.nps.edu/npspubs/scholarly/theses/2010/Jun/10Jun%5FLindauer.pdf.

Full text

Abstract:

Thesis (M.S. in Operations Research)--Naval Postgraduate School, June 2010.<br>Thesis Advisor(s): Buttrey, Samuel E. ; Second Reader: Whitaker, Lyn R. "June 2010." Description based on title screen as viewed on July 15, 2010. Author(s) subject terms: F/A-18, fatigue life expended (FLE), linear regression, Naval Air Systems Command (NAVAIR), prediction, S-Plus, strain gage, wing root fatigue. Includes bibliographical references (p. 53). Also available in print.

APA, Harvard, Vancouver, ISO, and other styles

16

Idriss, Moustapha. "Analyse expérimentale et par élément finis du comportement statique et vibratoire des matériaux composites sandwichs sains et endommagés." Phd thesis, Université du Maine, 2013. http://tel.archives-ouvertes.fr/tel-00808603.

Full text

Abstract:

Ce travail de thèse a pour objet d'analyser le comportement en statique, en fatigue et en vibration linéaire et non linéaire des matériaux sandwichs en présence d'une décohésion de longueur variable. Une étude détaillée est d'abord menée pour caractériser le comportement mécanique en statique et en fatigue de ces matériaux. Les essais ont été conduits en flexion 3-points sur des poutres de ces matériaux pour plusieurs distances entre appuis et pour plusieurs longueurs de fissure. En vibration, une étude expérimentale de la réponse en fréquence à une impulsion, menée à l'aide d'un vibromètre la

APA, Harvard, Vancouver, ISO, and other styles

17

Eichhorn, Sven. "Berechnungsansatz für Strukturbauteile aus Holzfurnierlagenverbundwerkstoff – WVC." Doctoral thesis, Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-106007.

Full text

Abstract:

Es wird ein einfacher Berechnungsansatz für ein Baukastensystem aus Kastenprofilen verschiedener Querschnittsabmessungen erarbeitet. Diese Profile bestehen aus WVC (Wood Veneer Composites, Holzfurnierlagenverbundwerkstoffen). Der Ansatz bildet den statischen Lastfall und das Ermüdungsverhalten unter schwellende Dreipunktbiegung ab. Am Beispiel eines ausgewählten Strukturbauteils aus handelsüblichen Birkensperrholz wird der Berechnungsansatz konkretisiert und durch Versuche evaluiert. Aufbauend auf dem Kraft-Verformungsverhalten der analysierten Einzelbauteile und der kapillarporösen Struktur d

APA, Harvard, Vancouver, ISO, and other styles

18

Nel, Conrad. "A comparison of muscle fatigue responses between static and quasi-static exertions." Thesis, Rhodes University, 2016. http://hdl.handle.net/10962/3475.

Full text

Abstract:

Background: This study examined localized muscle fatigue responses from sub-maximal quasi-static work protocols and additionally how it compares to purely static work. The goal was to produce research that enhances the understanding of the demands on muscles during manual work to aid in preventing injuries stemming from localized muscle fatigue. Injury rates remain a problem in manual labour sectors, particularly for the lower back and shoulder regions for the manufacturing, service and construction sectors, and for knee and elbow flexors in the sports sector. Few studies have looked at quasi-

APA, Harvard, Vancouver, ISO, and other styles

19

Davies, Timothy J. "Static, dynamic and fatigue characteristics of helical cables." Thesis, Loughborough University, 2000. https://dspace.lboro.ac.uk/2134/10916.

Full text

Abstract:

Extensive parametric studies have been carried out, using the orthotropic sheet theoretical model of Hobbs and Raoof, on a wide range of spiral strand constructions, with outside diameters, d, and lay angles, a, in the practical ranges, 16.4 mm ≤ d ≤ 184 mm, and 11 ≤ α ≤24 , respectively. The effects of an external hydrostatic pressure on certain structural characteristics of sealed spiral strands, used in deep water applications, have also been studied in some detail, for water depths ranging from 0 m to 2000 m. The results, based on such theoretical parametric studies, have, for example, bee

APA, Harvard, Vancouver, ISO, and other styles

20

Milner, N. P. "Modelling fatigue and recovery in static postural exercise." Thesis, University of Nottingham, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355419.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Starikov, Roman. "Quasi-static and fatigue behaviour of composite bolted joints." Doctoral thesis, Stockholm, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Milette, Jean-François. "Static and fatigue behaviour of unidirectional composites in compression." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=23266.

Full text

Abstract:

In this research, the test methods and specimen configurations are studied for both static and fatigue characterization of composite materials in compression, using carbon/epoxy as an example. A new test method was developed to allow for both static and compression fatigue testing. Finite element analyses were performed to analyze the effect of Teflon inserts between the tabs and specimen on the stress distribution in the specimen. The test uses a conventional material testing machine equipped with hydraulic grips. No fixture was needed to test the specimen, which is an important advantage esp

APA, Harvard, Vancouver, ISO, and other styles

23

SHRESTHA, JAYESH. "Static Program Analysis." Thesis, Uppsala universitet, Informationssystem, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-208293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Eilers, Olivia P. (Olivia Patrizia). "Shear characterization of AS43501-6 graphiteepoxy in static and fatigue." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=23366.

Full text

Abstract:

The shear behaviour of unidirectional AS4/3501-6 graphite/epoxy material is fully characterized for both the in-plane and the out-of-plane shear. A comprehensive study of testing methods for in-plane shear is performed and the three-rail shear test is chosen. A two-dimensional finite element analysis is performed in order to analyze and improve the performance of the three-rail shear test specimen. Through finite element analysis, the optimal specimen configuration is determined by inserting slots at the positions where there are stress concentrations. The results are verified by three-rail sh

APA, Harvard, Vancouver, ISO, and other styles

25

Liu, Yongliang. "Static, dynamic mechanical and fatigue properties of cement-asphalt mortars." Thesis, University College London (University of London), 2018. http://discovery.ucl.ac.uk/10042034/.

Full text

Abstract:

High-speed railway or rail (HSR) is a hot topic all over the contemporary world. And there is a growing tendency towards the application of nonballasted or slab tracks in HSR. Cement-asphalt mortar (CAM), a composite of Portland cement and asphalt emulsion, is widely used as a cushion layer in the two prevailing prefabricated concrete slab tracks of HSR in China, namely CRTS I and CRTS II. After a few years’ operation and service, however, premature cracking has been identified in the CAM layer along part of CRTS I and CRTS II. This is mainly caused by the fatigue of CAMs under repetitive traf

APA, Harvard, Vancouver, ISO, and other styles

26

Goodhead, Andrew H. "The static and fatigue behavior of low profile precast concrete sleepers." Master's thesis, Faculty of Engineering and the Built Environment, 2019. http://hdl.handle.net/11427/31512.

Full text

Abstract:

Low Profile precast concrete sleepers have the same vertical dimension as traditional wooden sleepers and thus offer a promising alternative to replace wooden sleepers on tracks where maintaining vertical alignment is necessary. The structural response of Low Profile precast concrete sleepers was studied under static and fatigue loading regimes using a tuned finite element model and four point flexure laboratory tests. The fatigue tests were conducted by following the procedure specified in the Australian railway code (AS 1084.14-2012). The usefulness of the Australian code fatigue test was br

APA, Harvard, Vancouver, ISO, and other styles

27

Prinsloo, Etienne Pieter Willem. "Fatigue equivalent static load: Methodology for the design of vehicle structures." Diss., University of Pretoria, 2003. http://hdl.handle.net/2263/25966.

Full text

Abstract:

This study is concerned with the design of vehicle structures through the use of Fatigue Equivalent Static Loads (FESL). A large percentage of failures of mechanical structures can be attributed to fatigue. Furthermore, it is also generally accepted that defective structural design is mostly caused by insufficient knowledge of the input loading. The fatigue loads experienced by vehicle structures are especially difficult to quantify. In the current competitive markets, it is essential to use a pro-active, timely and cost effective process to solve fatigue related problems. The heart of the FES

APA, Harvard, Vancouver, ISO, and other styles

28

Djoudi, Adel. "Binary level static analysis." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX093.

Full text

Abstract:

Les méthodes de vérification automatique des logiciels connaissent un succès croissant depuis le début des années 2000, suite à plusieurs succès industriels (Microsoft, Airbus, etc.). L'analyse statique vise, à partir d'une description du programme, à inférer automatiquement des propriétés vérifiées par celui-ci. Les techniques standards d'analyse statique travaillent sur le code source du logiciel, écrit par exemple en C ou Java. Cependant, avoir accès au code source n'est pas envisageable pour de nombreuses applications relatives à la sécurité, soit que le code source n'est pas disponible (c

APA, Harvard, Vancouver, ISO, and other styles

29

Dubé, Martine. "Static and fatigue behaviour of thermoplastic composite laminates joined by resistance welding." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=18695.

Full text

Abstract:

This work investigates the mechanical behaviour of resistance-welded thermoplastic composites under both static and fatigue conditions for skin/stringer and lap shear welds. The first configuration was chosen in order to represent a typical reinforced aerospace composite structure. It consists of a flange laminate, representing a stringer or frame, welded onto a skin laminate. The effects of various resistance welding parameters on the weld quality and mechanical performance of a carbon fibre/poly-ether-ether-ketone (APC-2/AS4) composite skin/stringer are first investigated. The results show t

APA, Harvard, Vancouver, ISO, and other styles

30

Phifer, Stephan Paul. "Quasi-Static and Fatigue Evaluation of Pultruded Vinyl Ester/E-Glass Composites." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/31093.

Full text

Abstract:

The quasi-static strength, stiffness, and fatigue properties of cross-ply, angle-ply, and quasi-isotropic vinyl ester/E-glass non-woven tricot stitched fabric composite laminates fabricated from the Continuous Resin Transfer Molding (CRTM) pultrusion process were the focus of this research. The tricot stitch and the 6% vinyl ester matrix cure shrinkage were found to play key roles in the quasi-static and fatigue strength and stiffness properties of these laminates. Laminates tested transverse to the pultrusion axis had greater fiber undulation and maximum of 44% quasi-static strength reduction

APA, Harvard, Vancouver, ISO, and other styles

31

Pham, Khang Duy. "Quasi-Static Tensile and Fatigue Behavior of Extrusion Additive Manufactured ULTEM 9085." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/82047.

Full text

Abstract:

Extrusion additive manufacturing technologies may be utilized to fabricate complex geometry devices. However, the success of these additive manufactured devices depends upon their ability to withstand the static and dynamic mechanical loads experienced in service. In this study, quasi-static tensile and cyclic fatigue tests were performed on ULTEM 9085 samples fabricated by fused deposition modeling (FDM). First, tensile tests were conducted following ASTM D638 on three different build orientations with default build parameters to determine the mechanical strength of FDM ULTEM 9085 with those

APA, Harvard, Vancouver, ISO, and other styles

32

Eswonia, Eugene Everett. "Effects of Delamination on Composite Sandwich Structures Under Static and Fatigue Loading." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/222.

Full text

Abstract:

This thesis will present the experimental and numerical analysis of composite sandwich structures under monotonic and fatigue loading. The sandwich skins were made of fiberglass and the core used was a closed cell PVC foam. Initial delaminations were introduced into the sandwich structures during manufacturing to see the effect of delamination size on the ultimate strength and monotonic fracture. Fiberglass rods, called shear keys, added to the foam core to determine whether or not they increased the strength of the test specimens. Furthermore, shear key locations were also varied and their

APA, Harvard, Vancouver, ISO, and other styles

33

Zavatta, Nicola <1991&gt. "Crack growth in adhesively bonded joints under quasi-static and fatigue loading." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amsdottorato.unibo.it/9464/1/Zavatta_Nicola_tesi.pdf.

Full text

Abstract:

Adhesively bonded joints are attracting increasing interest in the aerospace industry. However, incomplete knowledge of fatigue crack growth in adhesive bonds is a major concern to their application. This thesis investigates several aspects of crack growth in adhesively bonded joints. The influence of adhesive thickness on fatigue crack growth under mode I loading was addressed by a combination of experimental tests and numerical simulations. Increased crack growth was found in thicker specimens. This was explained as a result of increased energy available for crack growth in thicker adhesiv

APA, Harvard, Vancouver, ISO, and other styles

34

Borchert, Thomas. "Code Profiling : Static Code Analysis." Thesis, Karlstad University, Faculty of Economic Sciences, Communication and IT, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-1563.

Full text

Abstract:

<p>Capturing the quality of software and detecting sections for further scrutiny within are of high interest for industry as well as for education. Project managers request quality reports in order to evaluate the current status and to initiate appropriate improvement actions and teachers feel the need of detecting students which need extra attention and help in certain programming aspects. By means of software measurement software characteristics can be quantified and the produced measures analyzed to gain an understanding about the underlying software quality.</p><p>In this study, the techni

APA, Harvard, Vancouver, ISO, and other styles

35

Lanaspre, Benoit. "Static analysis for distributed prograph." Thesis, University of Southampton, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262726.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Ahmad, S. H. S. "Static analysis of masonry arches." Thesis, University of Salford, 2017. http://usir.salford.ac.uk/43067/.

Full text

Abstract:

The aim of the present research was to provide a practical theoretical model based on elementary statics, for assessment for masonry arch bridges, that benefits from the large scale experimental programme at Salford University, together with insight gained from the Distinct Element numerical modelling work. The need for large scale laboratory controlled load tests of physical models that may be reliably confined to a specific domain of behaviour with known parameters and modelling constraints, was highlighted in chapter 2 with reference to literature. Load tests on various distributions of sur

APA, Harvard, Vancouver, ISO, and other styles

37

Jakobsson, Filip. "Static Analysis for BSPlib Programs." Thesis, Orléans, 2019. http://www.theses.fr/2019ORLE2005.

Full text

Abstract:

La programmation parallèle consiste à utiliser des architectures à multiples unités de traitement, de manière à ce que le temps de calcul soit inversement proportionnel au nombre d’unités matérielles. Le modèle de BSP (Bulk Synchronous Parallel) permet de rendre le temps de calcul prévisible. BSPlib est une bibliothèque pour la programmation BSP en langage C. En BSPlib on entrelace des instructions de contrôle de la structure parallèle globale, et des instructions locales pour chaque unité de traitement. Cela permet des optimisations ﬁnes de la synchronisation, mais permet aussi l’écriture de

APA, Harvard, Vancouver, ISO, and other styles

38

Mountjoy, Jon-Dean. "Static analysis of functional languages." Thesis, Rhodes University, 1994. http://hdl.handle.net/10962/d1006690.

Full text

Abstract:

Static analysis is the name given to a number of compile time analysis techniques used to automatically generate information which can lead to improvements in the execution performance of function languages. This thesis provides an introduction to these techniques and their implementation. The abstract interpretation framework is an example of a technique used to extract information from a program by providing the program with an alternate semantics and evaluating this program over a non-standard domain. The elements of this domain represent certain properties of interest. This framework is ex

APA, Harvard, Vancouver, ISO, and other styles

39

Al-Khodairi, Fahad Abdul Aziz. "Static and dynamic properties of unidirectional hybrid resin and hybrid fibre composites." Thesis, Brunel University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.296214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Keerthi, Rajasekhar. "STABILITY AND STATIC NOISE MARGIN ANALYSIS OF STATIC RANDOM ACCESS MEMORY." Wright State University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=wright1195600920.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Xu, Chen. "Static and Fatigue Strength of Group Studs Shear Connector under Biaxial Loading Action." 京都大学 (Kyoto University), 2012. http://hdl.handle.net/2433/160990.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Ali, Hafiz T. "Mixed mode fracture in adhesively bonded joints under quasi-static and fatigue loading." Thesis, University of Surrey, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.540709.

Full text

Abstract:

Quasi-static and fatigue tests have been carried out to investigate mixed mode crack growth behaviour in FM73 epoxy adhesive using Double Cantilever Beam (DCB) specimens. The DCB configuration used consisted of equal thickness mild steel adherends bonded with FM73 adhesive. The joints were tested under a range of both quasi-static and fatigue mixed-mode conditions from mode I to mode II using a relatively simple, variable-mode loading fixture. Values of GI and GII for the different test conditions have been obtained using both closed-form Linear Elastic Fracture Mechanics (LEFM) methods report

APA, Harvard, Vancouver, ISO, and other styles

43

Smith, P. "Aspects of the static and fatigue behaviour of composite laminates, including bolted joints." Thesis, University of Cambridge, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.372919.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Kinawy, Moustafa. "Static and fatigue propagation of buckle-driven delaminations under bending and compressive loads." Thesis, University of Bath, 2011. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.545324.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Kapidzic, Zlatan. "Static and Fatigue Failure of Bolted Joints in Hybrid Composite-Aluminium Aircraft Structures." Doctoral thesis, Linköpings universitet, Mekanik och hållfasthetslära, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-122349.

Full text

Abstract:

The use of fibre composites in the design of load carrying aircraft structures has been increasing over the last few decades. At the same time, aluminium alloys are still present in many structural parts, which has led to an increase of the number of hybrid composite-aluminium structures. Often, these materials are joined at their interface by bolted connections. Due to their different response to thermal, mechanical and environmental impact, the composite and the aluminium alloy parts are subject to different design and certification practices and are therefore considered separately.The curre

APA, Harvard, Vancouver, ISO, and other styles

46

El-Senussi, A. K. "Interlaminar delamination in unidirectional carbon epoxy composites induced by static and fatigue loading." Thesis, University of Bristol, 1986. http://hdl.handle.net/1983/5db427ad-9653-4c84-999d-59a5a511ef30.

Full text

Abstract:

The research is concerned with the interlaminar delamination problem in unidirectional Carbon Fibre Reinforced Plastic (CFRP) laminates under static and fatigue loading. Analytical models backed by experimental techniques are employed to describe the delamination behaviour in 00 interfaces. The problem of a semi-infinite elastic plate loaded along its straight boundary is persued to develop an analytical and realistic Double Cantilever Beam (DCB) Model which accounts for the end deflections associated with deformation beyond a crack tip. Comparisons with the predictions of existing models and

APA, Harvard, Vancouver, ISO, and other styles

47

Syed, Mujtaba [Verfasser], and Jürgen [Akademischer Betreuer] Wilde. "Fatigue analysis of microstructures." Freiburg : Universität, 2016. http://d-nb.info/1122743335/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Hu, Zhihua. "Spectral fatigue analysis techniques." Thesis, University College London (University of London), 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362446.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Zhou, Shuo. "Static timing analysis in VLSI design." Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2006. http://wwwlib.umi.com/cr/ucsd/fullcit?p3207193.

Full text

Abstract:

Thesis (Ph. D.)--University of California, San Diego, 2006.<br>Title from first page of PDF file (viewed May 18, 2006). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (p. 110-113).

APA, Harvard, Vancouver, ISO, and other styles

50

Zhang, Connie. "Static Conflict Analysis of Transaction Programs." Thesis, University of Waterloo, 2000. http://hdl.handle.net/10012/1052.

Full text

Abstract:

Transaction programs are comprised of read and write operations issued against the database. In a shared database system, one transaction program conflicts with another if it reads or writes data that another transaction program has written. This thesis presents a semi-automatic technique for pairwise static conflict analysis of embedded transaction programs. The analysis predicts whether a given pair of programs will conflict when executed against the database. There are several potential applications of this technique, the most obvious being transaction concurrency control in systems

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!