Books on the topic 'Static measurement'

Duggan, P. C. Loss control by improved static measurement. London: Institute of Petroleum, 1985.

Berger, John R. Study of static and dynamic fracture using strain measurements. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Berger, John R. Study of static and dynamic fracture using strain measurements. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Byrdsong, Thomas A. Close-range photogrammetric measurement of static deflections for an aeroelastic supercritical wing. Hampton, Va: Langley Research Center, 1990.

Duke, John C. Measurement of displacement around holes in composite plates subjected to quasi-static compression. Hampton, Va: Langley Research Center, 1986.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Hill, D. A. Detection of quasi-static electric fields radiated by electrically small emitters. [Gaithersburg, Md.]: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Tapanes, Edward E. Static and dynamic strain measurements within composite materials using a localized Michelson fiber optic sensor. [Downsview, Ont.]: University of Toronto, 1990.

Hinds, H. A. Measurement of the longitudinal static stability and the moments of 0inertia of a 1/12th scale model of a B.Ae Hawk. Cranfield, Bedford: College of Aeronautics, Cranfield Institute of Technology, 1990.

International Measurement Confederation. Technical Committee on Measurement of Static and Dynamic Parameters of Structures and Materials. Conference. 1st Conference of the Technical Committee (TC15) on Measurement of Static and Dynamic Parameters of Structures and Materials: Plzen, Czechoslovakia, May 26-28, 1987 : proceedings. Edited by Havrilla K and International Measurement Confederation. Commack, N.Y: Nova Science Publishers, 1988.

International Measurement Confederation. Technical Committee TC15. Conference. 1st Conference of the Technical Committee (TC15) on measurement of static and dynamic parameters of structures and materials, Plzen, Czechoslovakia, May 26-28, 1987: Proceedings. Edited by Havrilla K. Commack, N.Y: Nova Science Publishers, 1988.

Plentovich, Elizabeth B. Orifice-induced pressure error studies in Langley 7- by 10-foot High-Speed Tunnel. Washington: NASA, 1986.

Riggle, Peter. Investigation of axial positioning for flexural compressors: Final technical report. Richland, WA: Tri-Cities University Center, University of Washington, 1991.

Igoe, William B. Analysis of fluctuating static pressure measurements in the National Transonic Facility. Hampton, Va: Langley Research Center, 1996.

Kolton, Eli. Results and analysis of static and dynamic multipath in a severe atmospheric environment. [Boulder, Colo.]: U.S. Dept. of Commerce, National Telecommunications and Information Administration, 1986.

Plentovich, Elizabeth B. Experimental cavity pressure measurements at subsonic and transonic speeds: Static-pressure results. Hampton, Va: Langley Research Center, 1993.

Golden, William L. Static pressure measurements of the shock-boundary layer interaction in a simulated fan passage. Monterey, Calif: Naval Postgraduate School, 1992.

Tapanes, Edward E. Static and dynamic strain measurements within composite materials using a localized Michelson fiber optic sensor. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1991.

G, Williams J. Estimating engine airflow in gas-turbine powered aircraft with clean and distorted inlet flows. Edwards, Calif: National Aeronautics and Space Administration, Dryden Flight Research Center, 1996.

Assessing student performance: Exploring the purpose and limits of testing. San Francisco: Jossey-Bass Publishers, 1993.

American Association of State Highway and Transportation Officials. Comparative performance measurement: Safety. Washington, DC: American Association of State Highway and Transportation Officials, 2009.

Lipscomb, M. Suzanne. Job performance measurement: Topics in the performance measurement of Air Force enlisted personnel. Brooks Air Force Base, Tex: Air Force Human Resources Laboratory, Air Force Systems Command, 1988.

United States. General Accounting Office. National Security and International Affairs Division. NASA's customer satisfaction measurements. Washington, D.C: The Office, 1997.

Developing cross-cultural measurement. New York: Oxford University Press, 2009.

Murrie, David Wynn. Wind velocity measurements in athletic stadia, and the effects of winds on sprint performances. Uxbridge: Brunel University, 1988.

Waag, Wayne L. Performance measurement requirements for tactical aircrew training. Brooks Air Force Base, Tex: Air Force Human Resources Laboratory, Air Force Systems Command, 1987.

Asada, Yukiko. Health inequality: Morality and measurement. Canada: U Toronto Pr, CN, 2007.

Nichols, C. Reid. Tidal current cycle observations for support of the NOS/USPS tidal current prediction quality assurance program. Silver Spring, Md: U.S. Dept. of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, 1995.

Nichols, C. Reid. Tidal current cycle observations for support of the NOS/USPS tidal current prediction quality assurance program. Silver Spring, Md: U.S. Dept. of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, 1995.

Nichols, C. Reid. Tidal current cycle observations for support of the NOS/USPS tidal current prediction quality assurance program. Silver Spring, Md: U.S. Dept. of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, 1995.

Bennerstedt, Torkel. Chernobyl fallout, measurements and consequences. Stockholm: Statens Strålskyddsinstitut = Swedish National Institute of Radiation Protection, 1986.

Tests, testing, and genuine school reform. Stanford, Calif: Hoover Institution Press, 2011.

National Partnership for Reinventing Government (U.S.). Balancing measures: Best practices in performance measurement. [Washington, D.C.?]: The Partnership, 1997.

Poister, Theodore H. Performance measurement in state departments of transportation. Washington, D.C: Transportation Research Board, National Research Council, 1997.

1948-, Silver Edward A., and Stein Mary Kay, eds. Improving instruction in geometry and measurement. New York: Teachers College Press, 2005.

Petroleum Measurement Manual: Part XIV: Statistics for Static and Dynamic Measurement (Petroleum Measurement Manual). The Institute of Petroleum, 1993.

Petroleum Measurement Manual: Part XII: Static and Dynamic Measurement of Light Hydrocarbon Liquids: Calculation Procedures (Petroleum Measurement Manual). The Institute of Petroleum, 1998.

Gilmore, Ian Stuart. Development of a measurement base for static secondary ion mass spectrometry. 2000.

Havrilla, K. Measurement of Static and Dynamic Parameters of Structures and Materials (IMEKO TC). Nova Science Pub Inc, 1988.

R, Adams Richard, Sandford M. C, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Close-range photogrammetric measurement of static defections for an aeroelastic supercritical wing. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

R, Adams Richard, Sandford M. C, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Close-range photogrammetric measurement of static defections for an aeroelastic supercritical wing. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

R, Adams Richard, Sandford M. C, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Close-range photogrammetric measurement of static defections for an aeroelastic supercritical wing. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

F, Harrington, and United States. National Aeronautics and Space Administration., eds. Static test induced loads verification beyond elastic limit. [Washington, D.C: National Aeronautics and Space Administration, 1996.

Fabry-Perot interferometer measurement of static temperature and velocity for ASTOVL model tests. [Washington, DC]: National Aeronautics and Space Administration, 1995.

G, Seasholtz Richard, and United States. National Aeronautics and Space Administration., eds. Fabry-Perot interferometer measurement of static temperature and velocity for ASTOVL model tests. [Washington, DC]: National Aeronautics and Space Administration, 1995.

G, Seasholtz Richard, and United States. National Aeronautics and Space Administration., eds. Fabry-Perot interferometer measurement of static temperature and velocity for ASTOVL model tests. [Washington, DC]: National Aeronautics and Space Administration, 1995.