Books on the topic 'Static Test'

Lee, B. DHC-8 static test program. Downsview, Ontario: de Havilland Aircraft Company of Canada, 1986.

I͡A, Kint͡sis T., ed. Static test methods for composites. New York, N.Y: Van Nostrand Reinhold Co., 1985.

Hamdioui, Said. Testing static random access memories: Defects, fault models, and test patterns. Boston: Kluwer Academic, 2004.

Institution, British Standards. Method for resistance of fabrics to water absorption (static immersion test). London: B.S.I., 1990.

Coerts, Alfred. Analysis of static cone penetration test data for subsurface modelling: A methodology. Utrecht: Koninklijk Nederlands Aardrijkskundig Genootschap/Faculteit Ruimtelijke Wetenschappen Universiteit Utrecht, 1996.

Sherlock, Elizabeth Jane. Evaluation of static and kinetic prediction test data and comparison with field monitoring data. Ottawa, ON: CANMET, 1995.

Könnecke, R. EC static high-temperature leach test: Summary report of a European Community interlaboratory round robin. Luxembourg: Commission of the European Communities, 1985.

Verderaime, V. Test load verification through strain data analysis. Washington, DC: National Aeronautics and Space Administration, 1995.

Yip, Long P. Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Hampton, Va: Langley Research Center, 1990.

Yip, Long P. Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Hampton, Va: Langley Research Center, 1990.

Pratt, Richard. A 96-hr static renewal acute lethal toxicity test (LCb50s) of pentachlorophenol to the first larval stage of Pandalus danae. Bellingham, Wash: Huxley College of Environmental Studies, Western Washington University, 1988.

Childs, Dara W. SSME seal test program: Test results for smooth, hole-pattern, and helically grooved stators : interim progress report. College Station, Tex: Texas A&M, Turbomachinery Laboratories, Mechanical Engineering Dept., 1987.

Phan, Long T. Static tests of one-third scale impact limiters. [Gaithersburg, MD]: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Phan, Long T. Static tests of one-third scale impact limiters. [Gaithersburg, MD]: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Phan, Long T. Static tests of one-third scale impact limiters. [Gaithersburg, MD]: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Lameris, J. The static strength of mechanically fastened carbon-epoxy joints without bending. Amsterdam, Netherlands: National Aerospace Laboratory, 1989.

Ott, C. L. Refinement of geochemical static tests for the prediction of acid drainage. S.l: s.n, 1989.

Burley, James R. Static investigation of circular-to-rectangular transition ducts for high-aspect-ratio nonaxisymmetric nozzles. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1986.

Bangert, Linda S. Static internal performance of a nonaxisymmetric vaned thrust reverser with flow splay capability. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.

Absolon, L. T. Static loading procedures and methods of interpreting results from compression tests on piles. London: Middlesex Polytechnic, 1990.

Collins, J. Scott. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Hampton, Va: Langley Research Center, 1990.

Hahne, David E. Low-speed static and dynamic force tests of a generic supersonic cruise fighter configuration. Hampton, Va: Langley Research Center, 1989.

Allen, David H. Analysis of static contact in laminated composite plates using damage mechanics: Final technical report. Hampton, VA: NASA Langley Research Center, 1995.

Chan, K. B. Static and dynamic compression tests of filament-wound CFRP and GRP tubes under axial compression. Manchester: UMIST, 1992.

Crane, Dale. Inspection authorization test prep: Test preparation and study references for the FAA inspection authorization knowledge test. 2nd ed. Newcastle, Wash: Aviation Supplies & Academics, 1998.

Inspection authorization test prep: Test preparation and study references for the FAA Inspection Authorization Knowledge Test. 2nd ed. Newcastle, Wash: Aviation Supplies & Academics, 1998.

Constructors, Wimpey Offshore Engineers and. The strength of grouted pile-sleeve connections for offshore structures: Static tests relating to sleeve buckling. London: HMSO, 1986.

"Ace" any test. 5th ed. Clifton Park, NY: Thomson Delmar Learning, 2005.

"Ace" any test. 3rd ed. Franklin Lakes, NJ: Career Press, 1996.

Fry, Ronald W. " Ace" any test. 4th ed. Franklin Lakes, NJ: Career Press, 2000.

Fry, Ronald W. "Ace" any test. Hawthorne, NJ: Career Press, 1992.

Center, Lewis Research, ed. Propfan test assessment propfan propulsion system static test report. Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1987.

F, Harrington, and United States. National Aeronautics and Space Administration., eds. Static test induced loads verification beyond elastic limit. [Washington, D.C: National Aeronautics and Space Administration, 1996.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ed. Modifications to the nozzle test chamber to extend nozzle static-test capability. [Washington, D.C.?]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Modifications to the nozzle test chamber to extend nozzle static-test capability. [Washington, D.C.?]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

E, Bach Ralph, Trà̂n Đức, and Ames Research Center, eds. Sideslip-induced static pressure errors in flight-test measurements. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1990.

Sideslip-induced static pressure errors in flight-test measurements. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1990.

E, Bach Ralph, Trà̂n Đức, and Ames Research Center, eds. Sideslip-induced static pressure errors in flight-test measurements. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1990.

Song, Wenyi. Test generation for static combinational logic circuits: analyses and algorithms. 1988.

E, Turnberg Jay, Wainauski H. S, and United States. National Aeronautics and Space Administration., eds. Large scale advanced prop-fan (LAP) static rotor test report. [Washington, DC]: National Aeronautics and Space Administration, 1990.

Operations, Thiokol Corporation Space, and George C. Marshall Space Flight Center., eds. Space shuttle production verification motor-1 (PV-1) static fire.: Final test report. Brigham City, UT: Thiokol Corp., Space Operations, 1989.

Institute of Electrical and Electronics Engineers. Standards Coordinating Committee on Dispersed Storage and Generation., ed. IEEE recommended practice: Test procedure for utility-interconnected static power converters. New York, NY: Institute of Electrical and Electronics Engineering, 1989.

Hamdioui, Said. Testing Static Random Access Memories: "Defects, Fault Models And Test Patterns". Springer, 2010.

Hamdioui, Said. Testing Static Random Access Memories: Defects, Fault Models and Test Patterns (Frontiers in Electronic Testing). Springer, 2004.

Test load verification through strain data analysis. MSFC, Ala: National Aeronautics and Space Administration, Marshall Space Flight Center, 1995.

Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential. Astm Intl, 1997.

Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

P, Yip Long, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

P, Yip Long, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

P, Yip Long, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Static wind-tunnel and radio-controlled flight test investigation of a remotely piloted vehicle having a delta wing planform. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.