Academic literature on the topic 'Stationary Office'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stationary Office.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Stationary Office"
1
McGann, Sarah, Robyn Creagh, Marian Tye, Jonine Jancey, and Krysten Blackford. "Stationary in the office: emerging themes for active buildings." Architectural Science Review 57, no. 4 (September 26, 2014): 260–70. http://dx.doi.org/10.1080/00038628.2014.958127.
Full text
2
Wahyuni, Sri, Wulan Dari, and Lusa Indah Prahartiwi. "APRIORI ALGORITHM FOR DETERMINING THE DEMAND LEVEL OF STATIONARY PT. MAIN GAFA INDONESIA." Jurnal Techno Nusa Mandiri 18, no. 1 (March 15, 2021): 65–72. http://dx.doi.org/10.33480/techno.v18i1.2223.
Full textAbstract:
PT Gafa Utama Indonesia is one company that provides services in teaching and writing. Until now, PT Gafa Utama Indonesia already has 30 well-known branches in Jabodetabek. In the teaching and learning process, Gafa needs some stationery and teaching aids. The high demand for office stationery, and the mismatch of inventory in the warehouse, affects the fluency in the teaching and learning process. The data used in this study is the report data on the demand for office stationery for the period January-December 2018. This study uses a priori algorithm method and assessment with tanagra tools. The results of manual calculations with Microsoft Excel are the same as those using the tanagra tool. The final result shows the 2 items with the most demand, namely an eraser and a sharpener with at least 50% support, and 50% confidence. These results can be used as a reference for PT Gafa Utama Indonesia in the supply of office stationery
3
Darwish, AtefMohammad, MomenAhmad Kamel, Kamal Zahran, and Mostafa Aboulela. "Office cervicoscopy versus stationary colposcopy in suspicious cervix: A randomized controlled trial." Journal of Mid-life Health 10, no. 3 (2019): 115. http://dx.doi.org/10.4103/jmh.jmh_135_18.
Full text
4
Dzelzitis, Egils, and Sandra Sidenko. "The Human Comfort Level in an Energy-Saving Simulation Model of Office Building." E3S Web of Conferences 172 (2020): 06009. http://dx.doi.org/10.1051/e3sconf/202017206009.
Full textAbstract:
Currently high attention is drawn to the studies of the influence of pulsating flow to the heat transfer. Such unsteady flows can be created artificially or may appear during the operation of the thermal energy equipment. The purpose of this work is to perform numerical studies of the pulsating fluid flow effect supplied to a panel heating radiator on its heat output; and to determine the effect of pulsations of heat output on a human comfort level as well. Numerical modeling was prepared with CAD/CFD/HVAC complex of SolidWorks/FlowSimulation software. Where the complete system of Navier-Stokes equations and the energy equation were solved using the k-ε turbulence model in a non-stationary formulation of the problem. Results of the numerical calculations showed that the periodic pulsating flow of the fluid in the heating radiator during operation, in comparison with the stationary mode, leads to increasing and decreasing in the thermal power of the radiator. But at the same time, with an average estimate, the thermal power with pulsations of the fluid’s flow increases for about 10-15% comparing with a stationary mode. Model of the office room in the considered operating mode is not comfortable; this conclusion is based on such criteria as operating temperature, PMV, PPD, identified in the numerical calculations process.
5
Williams, Mark C., Joseph P. Strakey, and Wayne A. Surdoval. "The U.S. Department of Energy, Office of Fossil Energy Stationary Fuel Cell Program." Journal of Power Sources 143, no. 1-2 (April 2005): 191–96. http://dx.doi.org/10.1016/j.jpowsour.2004.12.003.
Full text
6
AboulEla, Mostafa, MomenA Kamel, AtefM Darwish, and Kamal Zahran. "Office cervicoscopy versus stationary colposcopy in cases with suspicious cervix: a randomized controlled trial." Journal of Current Medical Research and Practice 4, no. 3 (2019): 355. http://dx.doi.org/10.4103/jcmrp.jcmrp_43_18.
Full text
7
Zheng, Wuping, and Yufei Yuan. "Identifying the differences between stationary office support and mobile work support: a conceptual framework." International Journal of Mobile Communications 5, no. 1 (2007): 107. http://dx.doi.org/10.1504/ijmc.2007.011492.
Full text
8
Istl, Alexandra C., and Vivian C. McAlister. "Medical response to the declaration of the First World War: The case of Edwin Seaborn." Journal of Medical Biography 26, no. 4 (May 4, 2018): 234–42. http://dx.doi.org/10.1177/0967772017752897.
Full textAbstract:
At the turn of the 20th century, Dr Edwin Seaborn was starting his surgical and academic career at Western University in Ontario. When war was declared in 1914, Seaborn prevailed upon the university’s president to offer the Canadian government a fully staffed hospital for deployment overseas. Initially declined by the War Office in Ottawa, the university's offer was later accepted after mounting casualties stretched the capacity of the Canadian Army Medical Corps, and Seaborn was granted command of the new No. 10 Canadian Stationary Hospital. From 1916 to 1919, Seaborn’s medical, surgical, and administrative practices transformed the humble No. 10 Stationary Hospital into a General Hospital that was indispensable to the war effort and raised the standard for military medical practice. Upon the unit’s return to London, Ontario, Seaborn’s dedication was transferred to his extensive work as an author, historian, academic, and beloved physician. During the centennial of the First World War, this paper explores the impact of an academic medical unit by looking at the career of its Commanding Officer: a man who made an invaluable contribution to the Canadian war effort and set a precedent for exceptional medical care at home and at war.
9
Davis, Kermit G., and Susan E. Kotowski. "Stand Up and Move; Your Musculoskeletal Health Depends on It." Ergonomics in Design: The Quarterly of Human Factors Applications 23, no. 3 (July 2015): 9–13. http://dx.doi.org/10.1177/1064804615588853.
Full textAbstract:
The new trend in office ergonomics is installing dynamic workstations that include sit-to-stand tables, treadmills, stationary bicycles, and exercise balls. The question is whether it is worth the investment to try to reduce musculoskeletal pain via these dynamic workstations. Postural change is good, but the most effective workstation seems to be the sit-to-stand table with respect to reducing discomfort suffered by office workers. Treadmills and cycle workstations do have the ability to increase energy expenditure and heart rate and thus are potentially beneficial in addressing obesity that results from sedentary work. For all outcomes, the key is to periodically get up and move around.
10
Kim, I. V., E. N. Penyugina, I. M. Barsukova, and R. I. Minnullin. "MEDICAL SORTING IN THE HOSPITAL OF EMERGENCY MEDICAL SERVICE: THE ENTERING STREAM ON THE OBSTETRICS AND GYNECOLOGY PROFILE." EMERGENCY MEDICAL CARE 22, no. 1 (April 6, 2021): 40–45. http://dx.doi.org/10.24884/2072-6716-2021-22-1-40-45.
Full textAbstract:
Relevance. Among the purposes and target indicators of the implemented National projects by the end of 2024 it should be noted increase in the expected duration of healthy life, increase in total coefficient of birth rate up to 1.7 on one woman which achievement is impossible without ensuring female health.The purpose: the analysis of a flow of the patients of an obstetric and gynecologic profile coming to a versatile hospital of emergency medical service (2015–2019).Methodology. Data of the versatile 800-bed hospital incorporating 60 beds for patients of an obstetric and gynecologic profile served as materials of a research. Statistical and analytical methods of a research are used.Results. The analysis of the entering stream (36.4 thousand in 5 years) with the diagnosis on the “obstetrics and gynecology” profile (the diagnosis of the direction) showed that most of them — 50.6% (р<0.01) were directed by the medical organizations of emergency medical service, 36.3% — the medical organizations of polyclinic link, 3.2% — the medical organizations of stationary type, and 9.8% — independently asked for medical care. 77.6% of patients arrived from 9:00 till 21:00, including 32.9% — from 9:00 till 12:00; the condition of 94.3% is regarded as satisfactory (р<0.01), only 71.5% of patients came to specialized offices according to a direction profile. The average time of stay of patients in office was about 2 hours (121.2±117.0 min.). Conclusion. Development of stationary offices of emergency medical service gives the chance of sorting of the arriving patients according to weight of a state and needs in specialized medical and diagnostic actions. The diagnosis only of 71.5% of the arriving patients corresponds to a direction profile. The share of patients (for 50.2%), capable to ask independently for medical care grows. Every fifth patient who is almost arriving in the emergency order receives adequate (necessary and sufficient) the volume of medical care in office of emergency medical service.
Dissertations / Theses on the topic "Stationary Office"
1
Hallgren, Ramona. "Sand waves : A stationary concept for the home office environment." Thesis, Linnéuniversitetet, Institutionen för design (DE), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-65317.
Full textAbstract:
Todays digitized society have open up for new types of office arrangements and possibilities of working from home in a higher extend. This thesis is based on the flexible working culture that is increasing, which means more personal responsibility regarding ergonomic and environment conditions as well as artifacts needed for a well equipped workplace outside the traditional office. Furniture dealers are having a new approach as open office hubs and home office environment are increasing with new needs. This project contains of a small investigation of which artifacts are needed and wanted from a customer perspective in the home environment due to these new behaviors. This thesis will as well show the outcome and process of one product in a collection of 5 stationary objects. The name of the project is as well the name of the collection. This project consists of two main objectives, customer orientation and product development.
2
Platzerová, Veronika. "Nájemní objekt Campus Bohunice – stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372221.
Full textAbstract:
The subject of this diploma thesis is the construction and technological solution of the construction of the campus building Bohunice - object C. This building is a new building located on several unfinished parcels. The diploma thesis contains technical reports, technological regulations of the selected works, control and test plans for these works, design of the machine group, the transport relations in the narrower and wider surroundings of the construction, the budget budget, the timetable, the design and realization of the tower cranes.
3
Coulibaly, Massita. "L'autosuffisance alimentaire et la politique rizicole en Côte d'Ivoire." Clermont-Ferrand 1, 1996. http://www.theses.fr/1996CLF10179.
Full textAbstract:
Cette étude a pour objet d’analyser le bien-fondé de la recherche de l’autosuffisance alimentaire entreprise en Côte d’Ivoire autour du développement de la filière riz, et d’examiner les capacités du pays à atteindre cet objectif après la dévaluation du FCFA. L’intérêt de ce travail pour le riz se justifie par la croissance de la part du riz dans la consommation des ivoiriens et le déficit constant de cette filière en dépit des sommes importantes engagées dans le développement de la production locale. Deux grands axes d’analyse sont évoqués. Le premier axe est l’analyse des causes de l’échec des politiques mises en place dans la filière avant la dévaluation. Cet échec s’est traduit par la croissance de la part des importations dans la consommation des ivoiriens. Par l’analyse des fondements des politiques alimentaires, nous vous proposons dans le premier chapitre d’examiner la cohérence des politiques mises en place dans le secteur. Cette analyse nous permet d’émettre l’hypothèse que la sécurité alimentaire, plus que l’autosuffisance a été le fondement des politiques alimentaires. Il y a donc eu une contradiction entre les objectifs d’autosuffisance affichés et les mesures de développement de la filière. Un examen de l’évolution du marché du riz par rapport aux différentes politiques, dans le chapitre 2, confirme bien cette contradiction et présente les réformes entreprises pour la production en vue de réaliser l’autosuffisance dans la filière. Le second axe porte sur l’efficacité des nouvelles mesures entreprises après la dévaluation. Dans cette optique, nous avons calculé les indicateurs de performance de la production de riz, à l’aide de la Matrice d’Analyse des Politiques, dans le chapitre 3. Ces indicateurs, calculés avant et après la dévaluation mettent en évidence le regain de compétitivité des unités de production locale. Cette analyse a aussi permis de souligner l’importance de l’approche par systèmes de culture et apporte des informations nécessaires à l’identification des modes de production à promouvoir. Nous avons également estimé la réponse des paysans aux différentes incitations contenues dans ces mesures dont la principale est le relèvement des prix aux producteurs. Cette analyse économétrique, a été menée à l’aide d’un modèle dynamique d’offre agricole intégrant un Mécanisme de Correction d’Erreurs. Elle révèle que l’offre du riz dépend positivement des prix relatifs des différentes cultures (riz, coton et maïs), elle dépend négativement du prix des facteurs de production (en l’occurrence la main d’œuvre) et du crédit agricole. La réaction des riziculteurs est donc en partie dictée par la rentabilité de la culture du riz et des conditions d’accès aux intrants agricoles. Ce résultat souligne de nouveau la nécessité de mettre en place un système de financement des activités agricoles après la dissolution de la BNDAOur goal in this study is to analyze the economic foundations of the rice self sufficiency objective (which ranks high in the agenda of the government) and assess the attainability of such goal after the devaluation of the CFA franc. Two main themes are evoked here. The first one focusses on the array of policies implemented before the devaluation. The causes of poor results obtained (growth in the importations of rice), seem to stem from inconsistencies between declared objectives and policies implemented. Chapter one has shown that food security rather than self-sufficiency was guiding force of reforms. This result is confirmed when we analyze in the chapter 2, the evolution of the rice market. The analysis of rice market evolution shows the reforms undertaken as well. In the second part, we analyze the effectiveness and usefulness if policies implemented after devaluation. For that purpose, indicators of performance of rice production have been calculated using Policy Analysis Matrix (PMA). This indicators, computed for the pre-devaluation as well as post-devaluation period have shown some increasing competitiveness of the local production units. We finally estimate the supply response behavior of peasants using a dynamic supply model with an Error Correction Mechanism (ECM). This econometric analysis shows that supply of rice is positively correlated with relative price (of rice, cotton and maize), negatively with price of inputs (especially labor) and credit. The latter call for an adequate rural financing system after the bankrucy of BNDA
4
Huang, Chia-Lin, and 黃佳琳. "The Innovation of Therapeutic Office Stationery Design." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/02246964530399398379.
Full textAbstract:
碩士中原大學
商業設計研究所
97
The main purpose of this study is to design office stationery products that are innovative and value-added. The approach of this study was to first explore the stationery industries in Taiwan and the industrial history and development. Secondly, in depth investigation on consumer insights were done through literature reviews. Thirdly, consumer emotions were examined and a general guideline of positive emotions and its inducement and effects was constructed for the design work of this study. Moreover, following the industrial design trend, emotional design aspects were explored. Three dimensions of emotional aspects (visceral, behavioral and cognitive) were used to evaluate the examples in case studies. Furthermore, noting the trend of current market is critical; hence therapeutic qualities of products were defined and generalized as the basis for the latter design work. In summary, the design of office stationery products will be based upon the positive emotional aspects such that therapeutic qualities will best be implied upon products through product-to-consumer connections.
5
Jedrzejczak, Jakub. "The comparative analysis of school bags online and offline market and evaluation of marketing strategies introduced by ASTRA S.A." Master's thesis, 2020. http://hdl.handle.net/10400.14/31274.
Full textAbstract:
The work is theoretical and empirical. The thread based on the literature on the subject
characterizes the elements of the global school backpack market. The online and offline market,
marketing strategies were analyzed, and a set of analytical indicators was presented.
The following work, which is the result of own empirical research, contains a
comprehensive assessment of the internal and external market of Astra S.A. to determine the
investment potential in the following market. The purpose of the work is to create a
development plan for Astra S.A company. That the producer would become a leader on the
school, plastic and textile articles market.O trabalho é teórico e empírico. O Thread é baseado na literatura sobre elementos do mercado de mochilas escolares. O mercado online e offline, onde estratégias como marketing foram analisadas e consequentemente foi apresentado um conjunto de indicadores analíticos. O trabalho consiste no resultado de uma investigação empírica, por isso contém uma avaliação extensa do mercado interno e externo da Astra S.A. no âmbito de determinar o investimento potencial do mercado. O objetivo deste trabalho é criar e desenvolver um plano para a empresa Astra. S.A. onde o produtor seria o líder no mercado de artigos escolares, plásticos e têxteis.
6
Schnell, Alexander. "Dissipative State Engineering in Quantum Many-Body Systems." 2019. https://tud.qucosa.de/id/qucosa%3A35357.
Full textAbstract:
Quantum systems that are in weak contact with a thermal heat bath will ultimately relax to an equilibrium state which is characterized by the temperature of the environment only. This state is independent of the specific properties of the bath and of how it is coupled to the system. This changes completely, when the system is additionally driven. Such a driven-dissipative situation can emerge, for example, due to an additional time-periodic modulation of the system, or when it is brought into contact with a second bath of different temperature. Then, the system will run into a well-defined nonequilibrium steady state. This state, however, will depend on the very details of the environment and its coupling to the system.
We study whether this freedom can be used to engineer interesting properties of quantum systems, which are not found in their equilibrium states, i.e. in the absence of a drive. We focus on bosonic quantum many-body systems. We investigate when far-from-equilibrium ideal gases feature Bose condensation in a group of single-particle states, as opposed to situations where Bose condensation is completely absent in the nonequilibrium steady state. We show that Bose condensation can be induced in a finite one-dimensional ideal gas by the competition of two heat baths whose temperatures both lie well above the equilibrium condensation temperature.
This setup also allows to engineer condensation in excited single-particle states. We discuss first ideas to study similar setups in weakly interacting Bose gases. Describing the microscopic dynamics of interacting many-body systems coupled to thermal baths is extremely challenging, due to the fact that generally the full many-body spectrum is inaccessible. Using ideas from semiclassics, we develop an approximation to the dynamics that yields good results at high and intermediate bath temperatures.
We also investigate the transient dynamics of driven-dissipative quantum systems. Our studies are motivated by a result that is well known for isolated quantum systems: for a system whose dynamics is generated by a time-periodic Hamiltonian, the stroboscopic dynamics (observed at integer multiples of the driving period) can always be understood as if it would stem from a time-independent Hamiltonian, the Floquet Hamiltonian. For open quantum systems in contact with an environment, we ask if a similar mapping to an effective generator, the Floquet Lindbladian, is always possible. For a simple qubit model we show that there are two extended parameter regions, one in which the Floquet Lindbladian exists, and one in which it does not. We discuss problems of analytical expansions that can give rise to this Floquet Lindbladian and discuss how we can interpret the region where it does not exist.
These results are important for dissipative Floquet engineering and open up new perspectives for the control of open quantum systems via time-periodic driving.:1. Introduction
2. Master equation for open quantum systems
3. Existence of the Floquet Lindbladian
4. Number of Bose-selected modes in driven-dissipative ideal Bose gases
5. High-temperature nonequilibrium Bose condensation induced by a hot needle
6. Weakly interacting Bose gases far from thermal equilibrium
7. Summary and outlookQuantensysteme, die in schwacher Wechselwirkung mit einem thermischen Wärmebad stehen, relaxieren stets in einen Gleichgewichtszustand, welcher allein durch die Temperatur der Umgebung beschrieben ist. Dieser Zustand ist unabhängig von den spezifischen Eigenschaften des Bades, und davon wie dieses an das System gekoppelt ist. Dies ändert sich, wenn das System zusätzlich angetrieben wird. Ein solches getrieben-dissipatives Szenario kann beispielsweise durch einen zusätzlichen zeitperiodischen Antrieb entstehen, oder wenn das System mit einem zweiten Bad unterschiedlicher Temperatur in Kontakt gebracht wird. In diesem Fall läuft das System in einen wohldefinierten stationären Nichtgleichgewichtszustand. Dieser Zustand hängt jedoch von den Details der Umgebung, und davon wie diese an das System gekoppelt ist, ab. Es wird untersucht ob diese Freiheit genutzt werden kann um interessante Eigenschaften von Quantensystemen zu konstruieren, die in deren Gleichgewichtszuständen, d.h. in Abwesenheit des Antriebs, nicht zu finden sind. Der Fokus der Arbeit liegt auf bosonischen Quantenvielteilchensystemen. Es wird ergründet unter welchen Bedingungen ideale Gase fernab des thermischen Gleichgewichts Bose Kondensation in einer Gruppe von Einteilchenzuständen aufweisen, im Gegensatz zu Szenarien in denen überhaupt keine Bose Kondensation im stationären Nichtgleichgewichtszustand auftritt. Weiterhin wird gezeigt, dass Bose Kondensation in einem eindimensionalen idealen Gas durch das Wechselspiel zweier Wärmebäder induziert werden kann. Die Temperatur beider Bäder liegt dabei weit über der Kondensationstemperatur des Gleichgewichts. Diese Anordnung erlaubt außerdem kontrollierte Kondensation in angeregten Einteilchenzuständen. Erste Ideen für das theoretische Studium ähnlicher Anordnungen für schwach wechselwirkende Bosegase werden diskutiert. Eine Beschreibung der mikroskopischen Dynamik wechselwirkender Vielteilchensysteme ist extrem anspruchsvoll, da typischerweise das volle Vielteilchenspektrum unzugänglich ist. Unter Zurhilfenahme semiklassischer Ideen wird eine Näherung der Dynamik entwickelt, welche eine gute Beschreibung für hohe und intermediäre Temperaturen liefert. Weiterhin wird die transiente Dynamik getrieben-dissipativer Quantensysteme untersucht. Die Motivation bietet ein bekanntes Resultat für abgeschlossene Quantensysteme: Für ein System, dessen Dynamik durch einen zeitperiodischen Hamiltonoperator bestimmt ist, kann die stroboskopische Dynamik (unter Beobachtung zu Zeiten, die Vielfache der Antriebsperiode sind) immer so verstanden werden als würde sie von einem zeitunabhängigen Hamiltonoperator, dem Floquet Hamiltonian, induziert. Für offene Quantensysteme im Kontakt mit einer Umgebung wird untersucht ob eine ähnliche Abbildung auf einen effektiven Generator, den Floquet Lindbladian, existiert. Für ein einfaches Qubit Modell wird gezeigt, dass es zwei ausgedehnte Parameterregionen gibt, eine in welcher der Floquet Lindbladian existiert und eine weitere in der dieser nicht existiert. Es werden Probleme von analytischen Entwicklungen des Floquet Lindbladian diskutiert. Auch wird eine Interpretation der Region gegeben, in der dieser nicht existiert. Diese Resultate sind maßgeblich für dissipatives Floquetengineering und eröffnen neue Blickwinkel auf die zeitperiodische Kontrolle offener Quantensysteme.:1. Introduction 2. Master equation for open quantum systems 3. Existence of the Floquet Lindbladian 4. Number of Bose-selected modes in driven-dissipative ideal Bose gases 5. High-temperature nonequilibrium Bose condensation induced by a hot needle 6. Weakly interacting Bose gases far from thermal equilibrium 7. Summary and outlook
Books on the topic "Stationary Office"
1
Great Britain. Her Majesty's Stationery Office. The Stationery Office annual catalogue. London: The Stationery Office, 2003.
Find full text
2
Office, Great Britain Stationery. The Stationery Office agency catalogue. London: Stationery Office., 2000.
Find full text
3
Great Britain. Her Majesty's Stationery Office. The Stationery Office annual catalogue. London: Stationery Office, 2000.
Find full text
4
Office, Great Britain Stationery. The Stationery Office annual catalogue. London: The Stationery Office, 1995.
Find full text
5
Office, Great Britain Stationery. The Stationery Office annual catalogue. London: The Stationery Office, 2002.
Find full text
6
Office, Great Britain Stationery. The Stationery Office agency catalogue. London: Stationery Office, 2000.
Find full text
7
Office, Great Britain Stationery. The Stationery Office agency catalogue. London: Stationery Office, 2002.
Find full text
8
Eklof, Tony. Irish Stationery Office reports, 1973-1986. [Dublin]: Library, University College Dublin, 1987.
Find full text
9
Great Britain. Her Majesty's Stationery Office. Outlook '96: The Stationery Office looks forward. Norwich: HMSO, 1996.
Find full text
10
Office, National Audit. Cabinet Office (Office of Public Service): The sale of the Stationery Office : report. London: Stationery Office, 1998.
Find full textBook chapters on the topic "Stationary Office"
1
Jacobi, Philip. "Life is Stationary: Mockumentary and Embarrassment in The Office." In British TV Comedies, 295–310. London: Palgrave Macmillan UK, 2016. http://dx.doi.org/10.1057/9781137552952_20.
Full text
2
Bailey, Paul. "Office Stationery." In Mastering Office Practice, 245–53. London: Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-07876-9_17.
Full text
3
Derballa, Volker, and Key Pousttchi. "Mobile Knowledge Management." In Mobile Computing, 197–205. IGI Global, 2009. http://dx.doi.org/10.4018/978-1-60566-054-7.ch018.
Full textAbstract:
Whereas knowledge management (KM) has gained much attention in the field of management science and practice as the eminent source of competitive advantage (e.g., Davenport & Prusak, 1998; Drucker, 1993; Nonaka & Takeuchi, 1995; Probst, Raub, & Romhardt, 2003), one issue has been largely neglected: The aspect of mobility. Conventional solutions for knowledge management systems (KMSs) have in common that they are designed for stationary workplaces and consequently require the corresponding infrastructure—that is, personal computers and fixed-line network access. Thus, they do not cater for business processes in which workers move around in or outside the premises. The result is that knowledge support for mobile workers is often rather restricted, once a task has to be performed outside of the office.
4
Spector, Regine A. "Adapting to Bazaar Ownership through Diplomacy." In Order at the Bazaar. Cornell University Press, 2017. http://dx.doi.org/10.7591/cornell/9781501709326.003.0005.
Full textAbstract:
This chapter shifts the focus from the previous chapter on the work of traders at Dordoi bazaar to that of the main owner. The chapter discusses how, in light of some in society who viewed bazaar owners as oligarchs, he actively sought to reframe his role as a bazaar founder, job provider, and guarantor of honorable work in an otherwise corrupt society. He described his own approach as “business diplomacy,” and collaborated with the trade union, got elected to political office, and decided when to engage in protest (and when not to). Instead of perspectives that view him as a predatory, stationary bandit, the chapter argues instead that we must take seriously how he sought to survive and adapt in an inauspicious political context by building relationships within the state and among different businesses, societal groups, and constituents to increase possibilities for action in challenging situations.
5
Clark, C. "End User Computing Ergonomics." In End-User Computing, 2274–83. IGI Global, 2008. http://dx.doi.org/10.4018/978-1-59904-945-8.ch131.
Full textAbstract:
Until recent years, the end user computing ergonomic focus has primarily been on stationary computer use. A new trend for the end user is mobile computing. An increasing number of end users are working outside of the traditional office. Mobile computing devices allow for these workers to perform job functions while in the field, at home, or while traveling. The organizational and end user benefits abound for the use of such enabling technology. However, the mobile computing environment introduces a new area of ergonomic concerns. Are businesses and end users monitoring the use of these devices from an ergonomic perspective? The good news is the outcome can be influenced and/or determined with intentional efforts on the part of both end users and managers. This paper includes an in depth review of the current and emerging issues, especially the mobile end user environment, that is important to the end user, manager, and organization as a whole. It also provides end user ergonomic suggestions and resources and addresses the management challenges rising from ergonomic issues.
6
"Office Automation Equipment & Stationery Supplies." In Trade Fairs in Japan 1987–88, 210–28. London: Macmillan Education UK, 1987. http://dx.doi.org/10.1007/978-1-349-10095-8_17.
Full text
7
Grant, Mariel. "The Stationery Office and Government Information." In Propaganda and the Role of the State in Inter-War Britain, 54–81. Oxford University Press, 1994. http://dx.doi.org/10.1093/acprof:oso/9780198204442.003.0003.
Full text
8
Lehmann, Hans, Ulrich Remus, and Stefan Berger. "Mobile Portals for Knowledge Management." In Mobile Computing, 188–96. IGI Global, 2009. http://dx.doi.org/10.4018/978-1-60566-054-7.ch017.
Full textAbstract:
More and more people leave their fixed working environment in order to perform their knowledgeintensive tasks at changing locations or while they are on the move. Mobile knowledge workers are often separated from their colleagues, and they have no access to up-to-date knowledge they would have in their offices. Instead, they rely on faxes and messenger services to receive materials from their home bases (Schulte, 1999). In case of time-critical data, this way of communication with their home office is insufficient. Mobile knowledge management (KM) has been introduced to overcome some of the problems knowledge workers are faced when handling knowledge in a mobile work environment (e.g., Berger, 2004; Grimm, Tazari, & Balfanz, 2002,). The main goal of mKM is to provide mobile access to knowledge management systems (KMS) and other information resources, to generate awareness between mobile and stationary workers by linking them to each other, and to realize mobile KM services that support knowledge workers in dealing with their tasks (see chapter, “A Mobile Portal for Academe: The Example of a German University” in the same book). So far, most of the off-the-shelf KMS are intended for the use on stationary desktop PCs or laptops with stable network access, and provide just simple access from mobile devices. As KMS are generally handling a huge amount of information (e.g., documents in various formats, multimedia content, etc.) the limitations of (mobile) information and communication technologies (ICTs), like mobile devices such as PDAs and mobile phones, becomes even more crucial (Hansmann, Merk, Niklous, & Stober, 2001). Mobile devices are usually not equipped with the amount of memory and computational power found in desktop computers; they often provide small displays and limited input capabilities, in comparison to wired networks, wireless networks generally have a lower bandwidth restricting the transfer of large data volumes and due to fading, lost radio coverage, or deficient capacity, wireless networks are often inaccessible for periods of time. Today, many KMS are implemented as knowledge portals, providing a single point of access to many different information and knowledge sources on the desktop together with a bundle of KM services. In order to realize mobile access to knowledge portals, portal components have to be implemented as mobile portlets. That means that they have to be adapted according to technical restrictions of mobile devices and the user’s context. This contribution identifies requirements for mobile knowledge portals. In particular, it reviews the main characteristics of mobile knowledge portals, which are considered to be the main ICT to support mobile KM. In addition, it outlines an important future issue in mobile knowledge portals: The consideration of location-based information in mobile knowledge portals.
9
"‘Third-Class Passenger Complaints and Indian Pilgrims’, from East India Railway Committee, 1920–21. Report of the Committee Appointed by the Secretary of State for India to Enquire into the Administration and Working of Indian Railways. vol. I. (London: His Majesty’s Stationary Office for the India Office, N. D.), pp. 54–55." In A World History of Railway Cultures, 1830–1930, edited by Matthew Esposito, 210–12. Routledge, 2020. http://dx.doi.org/10.4324/9781351211765-33.
Full text
10
Hurl-Eamon, Jennine, and Lynn MacKay. "Report on Sanitary Measures in India in 1875–76 (London: Her Majesty's Stationery Office, 1877), PP. 164–5." In Women, Families and the British Army 1700-1880, 146–47. Routledge, 2020. http://dx.doi.org/10.4324/9781003017981-38.
Full textConference papers on the topic "Stationary Office"
1
van Roode, Mark, William D. Brentnall, Paul F. Norton, and Gregory P. Pytanowski. "Ceramic Stationary Gas Turbine Development." In ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/93-gt-309.
Full textAbstract:
A program has been initiated under the sponsorship of the Department of Energy (DOE), Office of Industrial Technology, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of metallic hot section parts with uncooled ceramic components. It is envisioned that the successful demonstration of ceramic gas turbine technology, and the systematic incorporation of ceramics in existing and future gas turbines will enable more efficient engine operation, resulting in significant fuel savings, increased output power, and reduced emissions. The program which started in September, 1992, takes an engine of the Solar Centaur family of industrial gas turbines, and modifies the design of the hot section to accept ceramic first stage blades and first stage nozzles, and a ceramic combustor liner. The ceramic materials selected for the blade are silicon nitride, for the nozzle silicon nitride and silicon carbide, and for the combustor liner silicon carbide as well as two continuous fiber reinforced ceramic composites, one with a silicon carbide matrix and another with an oxide matrix. This paper outlines the approach, conceptual component design, and materials selection for the program.
2
Price, Jeffrey, Oscar Jimenez, Narendernath Miriyala, Josh B. Kimmel, Don R. Leroux, and Tony Fahme. "Ceramic Stationary Gas Turbine Development Program: Eighth Annual Summary." In ASME Turbo Expo 2001: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/2001-gt-0517.
Full textAbstract:
The Ceramic Stationary Gas Turbine (CSGT) program has been performed under the sponsorship of the United States Department of Energy, Office of Industrial Technologies and Office of Power Technologies. The objective of the program was to improve the performance of stationary gas turbines in cogeneration by retrofitting uncooled ceramic components into the hot section of the engine. The replacement of previously cooled metallic hot section components with the uncooled ceramics enables improved thermal efficiency, increased output power, and reduced gas turbine emissions. This review summarizes the latest progress on Phase III of the program, which involves 1) preparation for the final in-house CSGT engine test of ceramic blades, nozzles and CFCC liners, and 2) field testing of the CFCC combustor liners at two cogeneration end user sites. The field testing of CFCC combustor liners is now being performed under the Advanced Materials Program, sponsored by DOE, Office of Power Technologies. The Solar Centaur 50S engine, which operates at a turbine rotor inlet temperature (TRIT) of 1010°C, was selected for the developmental program. The program goals include an increase in the TRIT to 1121°C, accompanied by increases in thermal efficiency and output power. This is to be accomplished by the incorporation of ceramic first stage blades and nozzles, and a “hot wall” ceramic combustor liner. The performance improvements are attributable to the increase in TRIT and the reduction in cooling air requirements for the ceramic parts. The “hot wall” ceramic liners also enable a reduction in gas turbine emissions of NOx and CO. This 1121°C TRIT engine test of the ceramic hot section is planned for the first quarter of 2001. The component design and material selection have been previously definitized for the ceramic blades, nozzles and combustor liners. Each of these ceramic component designs was successfully evaluated in short-term engine tests in the Centaur 50S engine test cell facility at Solar. Environmental barrier coatings for the ceramic components are also being optimized. To date, seven field installations of the CSGT Centaur 50S engine totaling over 30,000 hours of operation have been initiated under the program at two industrial cogeneration sites. This paper briefly discusses the recent developmental efforts for the upcoming 1121°C TRIT engine test, but focuses on the various field demonstrations of CFCC combustor liners.
3
Zielasko, Daniel, Benjamin Weyers, and Torsten W. Kuhlen. "A Non-Stationary Office Desk Substitution for Desk-Based and HMD-Projected Virtual Reality." In 2019 IEEE Conference on Virtual Reality and 3D User Interfaces (VR). IEEE, 2019. http://dx.doi.org/10.1109/vr.2019.8797837.
Full text
4
van Roode, Mark, William D. Brentnall, Kenneth O. Smith, Bryan D. Edwards, John McClain, and Jeffrey R. Price. "Ceramic Stationary Gas Turbine Development Program: Fourth Annual Summary." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-317.
Full textAbstract:
A team led by Solar Turbines Incorporated is conducting a three phase program under the sponsorship of the United States Department of Energy, Office of Industrial Technologies, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of metallic hot section components with ceramic parts. Preliminary and concept design were completed in Phase I. Detailed design, component fabrication, and rig and engine testing are all being conducted in Phase II. Field engine testing will be performed in Phase III. This review summarizes progress on Phases II and III for the program for 1996. In 1996 the primary activities involved testing of uncooled first stage silicon nitride blades and SiC/SiC CFCC liners in a Centaur 50S engine modified to accept the ceramic components. Cumulative engine test experience by the end of November, 1996 has reached 52 hrs. The longest operating time on a single engine build at full load is 16 hours. Ceramic parts were also proof tested in rigs prior to engine testing. Preparations are currently underway for a 4,000 hour field test at the enhanced oil recovery site of ARCO Western Energy in Bakersfield, California.
5
van Roode, Mark, William D. Brentnall, Paul F. Norton, and Gary L. Boyd. "Ceramic Stationary Gas Turbine Development Program: First Annual Summary." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-313.
Full textAbstract:
A program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technology, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of hot section components with ceramic parts. It is envisioned that the successful demonstration of ceramic gas turbine technology, and the systematic incorporation of ceramics in existing and future gas turbines will enable more efficient engine operation, resulting in significant fuel savings, increased output power, and reduced emissions. The engine selected for the program, the Centaur 50 (formerly named Centaur ‘H’) will be retrofitted with first stage ceramic blades, first stage ceramic nozzles, and a ceramic combustor liner. The engine hot section is being redesigned to adapt the ceramic parts to the existing metallic support structure. The work in Phase 1 of the program involved concept and preliminary engine and component design, ceramic materials selection, technical and economic evaluation, and concept assessment. A detailed work plan was developed for Phases II and III of the program. The work in Phase II addresses detailed engine and component design, and ceramic specimen and component procurement and testing. Ceramic blades, nozzles, and combustor liners will be tested in subscale rigs and in a gasifier rig which is a modified Centaur 50 engine. The Phase II effort also involves long term testing of ceramics, development of appropriate nondestructive technologies for part evaluation, and component life prediction. Phase III of the program focuses on a 4,000 hour engine test at a cogeneration site. This paper summarizes the progress on the program through the end of 1993.
6
van Roode, Mark, William D. Brentnall, Paul F. Norton, and Bryan D. Edwards. "Ceramic Stationary Gas Turbine Development Program: Second Annual Summary." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-459.
Full textAbstract:
A program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technologies, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of hot section components with ceramic parts. Solar Turbines Incorporated leads a team that includes major U.S. and offshore suppliers of ceramic components, recognized test laboratories and a cogeneration enduser to develop and demonstrate ceramic insertion in a stationary gas turbine with the objectives of more efficient engine operation, resulting in significant fuel savings, increased output power, and reduced emissions. The engine selected for the program, the Centaur 50 is being retrofitted with first stage ceramic blades, first stage ceramic nozzles, and a ceramic combustor liner. The engine hot section is being redesigned to accommodate the ceramic parts to the existing metallic support structure. Detailed design of the ceramic components and of the interfacing metallic support structure has been completed. Two blade designs with different attachments and a nozzle design with a modified airfoil geometry have been developed. Three combustor liner designs are being evaluated based on monolithic tiles or rings, or integral cylinders of continuous fiber-reinforced ceramic matrix composites (CFCC). Fabrication of first generation prototype blades and nozzles is in progress. Fabrication of subscale combustor hardware has been completed. Materials property data are being gathered in support of the ceramic component design and life prediction. Fast fracture and dynamic fatigue testing were performed for the candidate blade and nozzle materials. Creep and oxidation testing is in progress. Nondestructive methodologies are being applied to test specimens, simulated components, subscale hardware and prototype components. A Centaur 50 engine was procured and has been modified for ceramic component testing in a full-size engine configuration.
7
Price, Jeffrey R., Oscar Jimenez, Les Faulder, Bryan Edwards, and Vijay Parthasarathy. "Ceramic Stationary Gas Turbine Development Program — Fifth Annual Summary." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-181.
Full textAbstract:
A program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technologies, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of metallic hot section components with ceramic parts. The program focuses on design, fabrication, and testing of ceramic components, generating a materials properties data base, and applying life prediction and nondestructive evaluation (NDE). The development program is being performed by a team led by Solar Turbines Incorporated, and which includes suppliers of ceramic components, U.S. research laboratories and an industrial cogeneration end user. The Solar Centaur 50S engine was selected for the development program. The program goals included an increase in the turbine rotor inlet temperature (TRIT) from 1010°C (1850°F) to 1121°C (2050°F), accompanied by increases in thermal efficiency and output power. The performance improvements are attributable to the increase in TRIT and the reduction in cooling air requirements for the ceramic parts. The ceramic liners are also expected to lower the emissions of NOx and CO. Under the program uncooled ceramic blades and nozzles have been inserted for currently cooled metal components in the first stage of the gas producer turbine. The louvre-cooled metal combustor liners have been replaced with uncooled continuous-fiber reinforced ceramic composite (CFCC) liners. Modifications have been made to the engine hot section to accommodate the ceramic parts. To-date all first generation designs have been completed. Ceramic components have been fabricated, and are being tested in rigs and in the Centaur 50S engine. Field testing at an industrial co-generation site was started in May, 1997. This paper will provide an update of the development work and details of engine testing of ceramic components under the program.
8
Price, Jeffrey R., Oscar Jimenez, Vijay Parthasarathy, and Narendernath Miriyala. "Ceramic Stationary Gas Turbine Development Program: Sixth Annual Summary." In ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/99-gt-351.
Full textAbstract:
The Ceramic Stationary Gas Turbine (CSGT) program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technologies. The objective of the program is to improve the performance of stationary gas turbines in cogeneration through the selective replacement of cooled metallic hot section components with uncooled ceramic parts. This review summarizes the progress on Phase III of the program which involves field testing of the ceramic components at a cogeneration end user site and characterization of the ceramic components following the field test exposure. The Solar Centaur 50S engine, which operates a turbine rotor inlet temperature (TRIT) of 1010°C (1850°F), was selected for the developmental program. The program goals include an increase in the TRIT to 1121°C (2050 °F), accompanied by increases in thermal efficiency and output power. This will be accomplished by the incorporation of uncooled ceramic first stage blades and nozzles, and a “hot wall” ceramic combustor liner. The performance improvements are attributable to the increase in TRIT and the reduction in cooling air requirements for the ceramic parts. The “hot wall” ceramic liners also enable a reduction in gas turbine emissions of NOx and CO. The component design and material selection have been definitized for the ceramic blades, nozzles and combustor liners. Each of these ceramic component designs were successfully tested in short term engine tests in the Centaur 50S engine test cell facility at Solar. Based on the results of the engine testing of the ceramic components, minor redesigns of the ceramic/metallic attachments were conducted where necessary. Based on their performance in a 100 hour cyclic in-house engine test, the ceramic components are approved for field testing. To date, four field installations of the CSGT Centaur 50S engine totaling over 4000 hours of operation have been initiated under the program at an industrial cogeneration site. This paper discusses the component design and material selection, in house engine testing, field testing, and component characterization.
9
Price, Jeffrey, Oscar Jimenez, Vijay Parthasarathy, Narendernath Miriyala, and Don Leroux. "Ceramic Stationary Gas Turbine Development Program — Seventh Annual Summary." In ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0075.
Full textAbstract:
The Ceramic Stationary Gas Turbine (CSGT) program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technologies. The objective of the program is to improve the performance of stationary gas turbines in cogeneration by retrofitting uncooled ceramic components into the hot section of the engine. The replacement of previously cooled metallic hot section components with the uncooled ceramics enables improved thermal efficiency, increased output power, and reduced gas turbine emissions. This review summarizes the progress on Phase III of the program, which involves field testing of the ceramic components at cogeneration end user sites. The Solar Centaur 50S engine, which operates a turbine rotor inlet temperature (TRIT) of 1010°C (1850°F), was selected for the developmental program. The program goals include an increase in the TRIT to 1121°C (2050°F), accompanied by increases in thermal efficiency and output power. This will be accomplished by the incorporation of ceramic first stage blades and nozzles, and a “hot wall” ceramic combustor liner. The performance improvements are attributable to the increase in TRIT and the reduction in cooling air requirements for the ceramic parts. The “hot wall” ceramic liners also enable a reduction in gas turbine emissions of NOx and CO. The component design and material selection have been definitized for the ceramic blades, nozzles and combustor liners. Each of these ceramic component designs was successfully tested in short term engine tests in the Centaur 50S engine test cell facility at Solar. Based on their performance in a 100 hour cyclic in-house engine test, the ceramic components were approved for field testing. Oxidation of the ceramic components in the gas turbine environment dictated the need for environmental barrier coatings, which were optimized under the program. To date, six field installations of the CSGT Centaur 50S engine totaling over 14,000 hours of operation have been initiated under the program at two industrial cogeneration sites. An 8000 hour field demonstration of a low emission ceramic combustion system was initiated in August 1999. This paper briefly discusses the recent developmental efforts for the ceramic components, but focuses on the various field demonstrations.
10
Norton, Paul F., Gary A. Frey, Hamid Bagheri, Aaron Flerstein, Chris Twardochleb, Oscar Jimenez, and Arun Saith. "Ceramic Stationary Gas Turbine Development Program: Design and Life Assessment of Ceramic Components." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-383.
Full textAbstract:
A program is being performed under the sponsorship of the United States Department of Energy, Office of Industrial Technology, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of hot section components with ceramic parts. It is envisioned that the successful demonstration of ceramic gas turbine technology, and the systematic incorporation of ceramics in existing and future gas turbines will enable more efficient engine operation, resulting in significant fuel savings, increased output power, and reduced emissions. The engine selected for the program, the Centaur 50 (formerly named Centaur ‘H’) will be retrofitted with first stage ceramic blades, first stage ceramic nozzles, and a ceramic combustor liner. The engine hot section is being redesigned to adapt the ceramic parts to the existing metallic support structure. The program currently in Phase II focuses on detailed engine and component design, ceramic component fabrication, ceramic component testing, establishment of a long term materials property database, and the development and application of supporting technologies in the areas of life prediction and non-destructive evaluation. This paper outlines the design activities associated with the introduction of a ceramic first stage nozzle and two configurations of ceramic first stage turbine blade. In addition, probabilistic life assessment of the ceramic parts for major failure modes (fast fracture, slow crack growth and where relevant, creep and oxidation) will be discussed.