Relevant bibliographies by topics / Steel, Cast. Steel, Cast Steel castings

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Steel, Cast. Steel, Cast Steel castings'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Steel, Cast. Steel, Cast Steel castings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Stradomski, Z., S. Stachura, and G. Stradomski. "Fracture Mechanisms in Steel Castings." Archives of Foundry Engineering 13, no. 3 (2013): 88–91. http://dx.doi.org/10.2478/afe-2013-0066.

Full text
Abstract:
Abstract The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidifi
APA, Harvard, Vancouver, ISO, and other styles
2

Yan, Huadong, Hui Jin, and Ruigen Yao. "Prediction of the damage and fracture of cast steel containing pores." International Journal of Damage Mechanics 29, no. 1 (2019): 166–83. http://dx.doi.org/10.1177/1056789519872000.

Full text
Abstract:
For spatial design freedom, steel castings are widely used in bridges, airport terminals, and offshore platforms. However, different from hot-rolling technology, casting process variables, such as the casting temperature and those related to graphite spheroidization and post-heat treatment, may cause casting defects. To improve the safety and effectiveness of steel castings, a study consisting of experiments and numerical calculations is performed to investigate the effect of pores on the damage and fracture of cast steel. The chemical composition, metallography, and tomographic imaging of cas
APA, Harvard, Vancouver, ISO, and other styles
3

Odilov, Furkat, and Farrukhjon Abdullaev. "Improving The Technology Of Continuous Casting Of Steel Castings." American Journal of Engineering And Techonology 03, no. 04 (2021): 108–17. http://dx.doi.org/10.37547/tajet/volume03issue04-17.

Full text
Abstract:
This article describes the quality and cost-effectiveness of converting steels by melting them in electric arc furnaces. In addition, the technology of continuous casting of cast products in the furnace with the help of ferroalloys, followed by various equipment.
APA, Harvard, Vancouver, ISO, and other styles
4

Kalandyk, B. "Microstructure and Abrasive Wear Resistance of 18Cr-4Ni-2.5Mo Cast Steel." Archives of Foundry Engineering 12, no. 4 (2012): 81–84. http://dx.doi.org/10.2478/v10266-012-0111-0.

Full text
Abstract:
Abstract An influence of a decreased Cr content on the microstructure of the highly alloyed Cr-Ni cast steel, duplex type, melted under laboratory conditions, was characterized in the paper. The microstructure investigations were performed in the initial state and after the heat treatment (solution annealing) at 1060°C as well as the phase transformation kinetics at continuous cooling was measured. The wear resistance of the investigated cast steel was tested and compared with the 24%Cr-5%Ni-2.5%Mo cast steel. The Cr content decrease, in ferritic-austenitic cast steels (duplex), from 24-26%Cr
APA, Harvard, Vancouver, ISO, and other styles
5

Holtzer, M., A. Bobrowski, D. Drożyński, and J. Mocek. "Investigations of Protective Coatings for Castings of High-Manganese Cast Steels." Archives of Foundry Engineering 13, no. 1 (2013): 39–44. http://dx.doi.org/10.2478/afe-2013-0008.

Full text
Abstract:
Abstract When cast steel castings are made in moulding sands on matrices of high-silica sand, which has a low fire resistance the problem of the so-called chemical penetration is distinctly visible. Whereas this effect appears to a small degree only when moulding sand matrices are of chromite, zircon or olivine sands. Therefore in case of making castings of high-manganese cast steel (e.g. Hadfield steel) sands not containing free silica should be applied (e.g. olivine sand) or in case of a high-silica matrix protective coatings for moulds and cores should be used. Two protective coatings, magn
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Xiang-Ru, Qi-Jie Zhai, Han Dong, Bao-Hua Dai, and Hardy Mohrbacher. "Molybdenum alloying in cast iron and steel." Advances in Manufacturing 8, no. 1 (2019): 3–14. http://dx.doi.org/10.1007/s40436-019-00282-1.

Full text
Abstract:
AbstractMetal casting is an important manufacturing technology for efficiently producing massive components with complex shape. A large share of industrial castings is made from iron and steel alloys, combining attractive properties and low production cost. Upgrading of properties in cast iron and steel is mainly achieved by alloying and in fewer cases by heat treatment. Molybdenum is an important alloying element in that respect, increasing strength, hardness and toughness. It also facilitates particular heat treatments such as austempering. The paper describes the metallurgical functionality
APA, Harvard, Vancouver, ISO, and other styles
7

Midson, Stephen, and David J. Browne. "Casting Wear-Resistant Functionally Gradient Ferrous Alloys via Partial Solidification Processing." Solid State Phenomena 192-193 (October 2012): 506–11. http://dx.doi.org/10.4028/www.scientific.net/ssp.192-193.506.

Full text
Abstract:
The CDC (Cast-Decant-Cast) Process is novel semi-solid processing method for joining two alloys, allowing the production of components from two or more alloys. The process produces a functionally gradient material (FGM) which, instead of having a sharp interface between the two alloys, features a transition region exhibiting a smooth gradient in concentration, microstructure and properties. Functionally gradient materials provide engineers with the flexibility to design components with different material properties at different locations. The details of the CDC Process are described. This pape
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Libin, Hui Jin, Haiwei Dong, and Jing Li. "Balance Fatigue Design of Cast Steel Nodes in Tubular Steel Structures." Scientific World Journal 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/421410.

Full text
Abstract:
Cast steel nodes are being increasingly popular in steel structure joint application as their advanced mechanical performances and flexible forms. This kind of joints improves the structural antifatigue capability observably and is expected to be widely used in the structures with fatigue loadings. Cast steel node joint consists of two parts: casting itself and the welds between the node and the steel member. The fatigue resistances of these two parts are very different; the experiment results showed very clearly that the fatigue behavior was governed by the welds in all tested configurations.
APA, Harvard, Vancouver, ISO, and other styles
9

Jandová, Dagmar, and Josef Kasl. "Effect of Heat Treatment and Microalloying on Toughness of Cast Low Carbon Steel." Materials Science Forum 500-501 (November 2005): 489–94. http://dx.doi.org/10.4028/www.scientific.net/msf.500-501.489.

Full text
Abstract:
The possibility of mechanical properties improvement in cast low carbon manganese steels for thin-walled castings via appropriate microalloying and heat treatment was studied. The steels (0.15 C and 1.2 Mn) microalloyed by vanadium, titanium and niobium were undergone the solution heat treatment. Mechanical testing and detailed microstructural analyses were performed using light, transmission and scanning electron microscopy. Precipitation processes in individual steels were discussed and the steel with the most promising composition was selected for following experiments.
APA, Harvard, Vancouver, ISO, and other styles
10

Ramírez-López, A., D. Muñoz-Negron, S. Romero-Hernandez, V. Cruz-Morales, and R. Escarela-Perez. "Thermal Behavior of Cast Steel Industrially Produced." Advanced Materials Research 628 (December 2012): 179–82. http://dx.doi.org/10.4028/www.scientific.net/amr.628.179.

Full text
Abstract:
This work is focused to evaluate heat removal simulation on the continuous casting process of stell, which is the most used method to produce big mounts of steel.The understanding of steel thermal behavior is very important in order to control the industrial processing and guarantee steel quality, here different mechanism are involved such as radiation,forced convection and conduction.A finite difference method easy to program is used to solve the simulation.This calculation is also coupled a with virtual kinematics model in order to create a more realistic simulation.Finally computer tools we
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Federico, Giovanni. "Use of Cast Modular Components for Concentrically Braced Steel Frames." Diss., The University of Arizona, 2012. http://hdl.handle.net/10150/268572.

Full text
Abstract:
Cast modular components have been under development for earthquake resistant steel structures. These concepts take advantage of the versatility in geometry afforded with the casting process to create components specifically configured for ductile behavior. Two systems were developed as part of this dissertation research: (1) the Cast Modular Ductile Bracing system (CMDB); (2) the Floating Brace system (FB).The CMDB system makes use of cast components introduced at the ends and the center of the brace to produce a special bracing detail with reliable strength, stiffness and deformation capacity
APA, Harvard, Vancouver, ISO, and other styles
2

Sumer, Ali. "Prototype Development and Experimental Verification of a Cast Modular Connector for Seismic-Resistant Steel Frames." Diss., The University of Arizona, 2006. http://hdl.handle.net/10150/194890.

Full text
Abstract:
A cast modular connector (MC) has been developed for use in seismic-resistant steel moment frames. The MC is a field bolted beam flange connection intended to serve as the frame's special energy-dissipating detail. The connector is specifically configured for optimal seismic performance through a casting process. The MC possesses inherent ductility through variable-section arms that minimize plastic strain demand and a reliable yet economical fastening method through a base end-region that virtually eliminates prying forces on bolts.The dissertation presents three journal papers. The first pap
APA, Harvard, Vancouver, ISO, and other styles
3

Archer, Lucas Andrew. "Development of high-performance cast steel crankshafts." Thesis, University of Iowa, 2016. https://ir.uiowa.edu/etd/2179.

Full text
Abstract:
To produce cast steel crankshafts, risering and gating systems are developed. Filling and solidification simulations of the steel crankshaft rigging are carried out to confirm that the rigging developed will produce a low porosity casting. A sand mold is created with Computer-aided design software, based on the developed crankshaft and rigging. Two prototype crankshafts are cast from the sand molds, and analyzed for porosity. The porosity analysis results are compared directly to the simulated porosity, and found to be in good agreement. From the analysis of the prototype crankshaft, rigging s
APA, Harvard, Vancouver, ISO, and other styles
4

Härdeman, Mimmi. "Feasibility Study for a Cast Steel Guideline." Thesis, KTH, Maskinkonstruktion (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-185514.

Full text
Abstract:
The present work was conducted at Scania CV AB and has as main goal to produce a cast steel guideline. There is a great need to conduct a cast steel guideline, in order to help designers in their process to choose suitable materials and methods to produce lightweight components with higher performance. This work contains information related to mechanical properties, casting processes, castability, machinability, defect characterization, heat treatments, weldability and surface treatments of cast steels. This work was limited to cast steels which could be applied on two specific components of t
APA, Harvard, Vancouver, ISO, and other styles
5

Carpenter, Kristin. "The influence of microalloying elements on the hot ductility of thin slab cast steel." Department of Materials Engineering - Faculty of Engineering, 2004. http://ro.uow.edu.au/theses/161.

Full text
Abstract:
Experiments were preformed on a Gleeble 3500 Thermomechanical Simulator to study the hot ductility behaviour of C-Mn-A1 steel and the influence of Nb, Ti and Nb-Ti additions. The simple hot tensile test has been shown to correlate well to the problem of transverse cracking. Therefore, the principle aim of this research is to gain a greater understanding of transverse cracking during the straightening of continuously cast slabs. In particular, attention was paid to thin slab casting conditions. Hot tensile test specimens were either solution treated in melted in-situ (direct cast) and cooled to
APA, Harvard, Vancouver, ISO, and other styles
6

Sung, Pil Kyung 1961. "Segregation and structure in continuously cast high carbon steel." Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/277066.

Full text
Abstract:
After hot rolling, the presense of segregation in the center of wire-rod can lead to a nonuniform transformation, resulting in bands of martensite in the microstructure. This is considered to be a defect, called center-martensite, because it can cause cracks and breaks during wire drawing. To identify the mechanism for the formation of center-martensite in wire-rod, the structure, macrosegregation and microsegregation in unworked billets were characterized. Based on measurements of secondary dendrite arm spacings, cooling rates during solidification were estimated. It appears that the macroseg
APA, Harvard, Vancouver, ISO, and other styles
7

Fager, Fredrick, and Serg Chanouian. "Nuclear Waste Canister : Evaluating the mechanical properties of cassette steel after casting." Thesis, KTH, Materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209803.

Full text
Abstract:
Företaget Svensk Kärnbränslehantering AB (SKB) håller på att utveckla en slutförvaringskapsel som kommer innehålla avfall från den svenska kärnkraften. Det är dock fortfarande en process under utveckling och därför undersöks olika typer av metoder och kapselmaterial för att kunna tillverka en hållbar och säker kapsel. Kapseln består av ett hölje av kopparrör med svetsad botten och lock och en insats med stållock. Insatsen är en cylindrisk konstruktion  av segjärn och innehåller en svetsad stålkassett för att skapa utrymmen till det använda kärnbränslet. Insatsen innehåller bland annat stålrör
APA, Harvard, Vancouver, ISO, and other styles
8

Björn, Linnéa. "Investigation of Hot Ductility Gradients in Duplex Stainless Steel in the Beginning of the Continuous Casting Proces." Thesis, KTH, Materialvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-160892.

Full text
Abstract:
The steel quality is deteriorated at a continuous casting start. Therefore, material from the first cast slab is cut off and re-melted in the melt shop. If too little is discarded, the inferior quality in the retained length can cause defects like edge cracks during subsequent hot rolling. This means that manufacturing resources are wasted on processing inferior material which has to be re-melted anyways at a later stage. On the other hand, if an excessive length of the first slab is re-melted, good material is wasted. In either case, optimizing the length of the start-scrap material is both e
APA, Harvard, Vancouver, ISO, and other styles
9

Kamberoglu, Murat. "Improvement Of Impact Resistance Of Aluminum And Zinc Based Die Cast Parts By Means Of Tool Steel Inserts." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613905/index.pdf.

Full text
Abstract:
High Pressure Die Casting (HPDC) is low-cost technique for the mass production of complex, non-ferrous parts. Despite its benefits such as dimensional accuracy, surface quality and high production rate<br>some mechanical drawbacks limit use of HPDC in production of critical parts especially under dynamical loads. This study aims to improve impact resistance and surface hardness of die cast parts by means of tool steel inserts. These inserts act as a barrier between the impactor and die casting alloy, in order to avoid surface deformation and reduce stress localization which leads crack format
APA, Harvard, Vancouver, ISO, and other styles
10

Matsuyama, Kyoko. "MOMENT TO MOMENT." Kent State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=kent1374849286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Wanstall, Christopher R. Clean cast steel technology. Technical Steering Committee, Steel Founders' Society of America, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

International Symposium on Direct Rolling and Hot Charging of Strand Cast Billets (1988 Montréal, Québec). Proceedings of the International Symposium on Direct Rolling and Hot Charging of Strand Cast Billets, Montreal, Canada, August 29-30, 1988. Pergamon Press, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Werner, Theisen, and SpringerLink (Online service), eds. Ferrous Materials: Steel and Cast Iron. Springer-Verlag, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Wen. Role of as-cast microstructure in the development of properties in heat treated cast steels. Carbon and Low Alloy Technical Research Committee, Steel Founders' Society of America, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Joyce, J. A. Elastic-plastic characterization of a cast stainless steel pipe elbow material. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Joyce, J. A. Elastic-plastic characterization of a cast stainless steel pipe elbow material. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Joyce, J. A. Elastic-plastic characterization of a cast stainless steel pipe elbow material. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rassizadehghani, Jafar. Intercritical heat treatment of C-Mn and 8630 type cast steels. Carbon and Low Alloy Technical Research Committee, Steel Founders' Society of America, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bates, Charles E. Effects of melt practice, core binder, and core density on hot tearing of cast steel. Carbon and Low Alloy Technical Research Committee, Steel Founders' Society of America, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hiser, A. L. Tensile and J-R curve characterization of thermally aged cast stainless steels. Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Lucey, Tim, Richard Wuhrer, Paul Huggett, Ken Moran, Wing Yeung, and Michael Cortie. "Solidification Phenomena during Casting of Stainless Steel/Cast Iron Composites." In Supplemental Proceedings. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118357002.ch35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Dayue, and Martin Strangwood. "Characterisation and Modelling of Microsegregation in Low Carbon Continuously Cast Steel Slab." In Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Dayue, and Martin Strangwood. "Characterisation and Modelling of Microsegregation in Low Carbon Continuously Cast Steel Slab." In Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48102-9_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Lifeng, and Qiangqiang Wang. "Prediction of Inclusions Distribution in a Steel Continuous Casting Slab Cast with FC-Mold." In TMS 2015 144th Annual Meeting & Exhibition. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48127-2_150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sun, Junjie, Jingzheng Ye, Honggang Zhong, Wei Du, and Qijie Zhai. "Effects of Solidification Conditions on As-Cast Structure of Ferritic Stainless Steel in Continuous Casting." In EPD Congress 2014. John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889664.ch41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Durand-Charre, Madeleine. "Steel Design." In Microstructure of Steels and Cast Irons. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-08729-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Durand-Charre, Madeleine. "From iron to steel." In Microstructure of Steels and Cast Irons. Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-08729-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Solin, Jussi, and Juha Pulkki. "LCF Behaviour of a Cast Steel." In Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2860-5_117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wallis, Geoff, and Michael Bussell. "Cast Iron, Wrought Iron and Steel." In Materials & Skills for Historic Building Conservation. Blackwell Publishing Ltd, 2008. http://dx.doi.org/10.1002/9780470697696.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Xijia, Guangchun Quan, and Clayton Sloss. "Low Cycle Fatigue of Cast Austenitic Steel." In Fatigue and Fracture Test Planning, Test Data Acquisitions and Analysis. ASTM International, 2017. http://dx.doi.org/10.1520/stp159820160030.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Unocic, Raymond R., Kinga A. Unocic, Bruce A. Pint, and Mark D. Lipschutz. "Characterization of Pre- and Post-Service Grain Boundary Phases in a Cast Austenitic Steel." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-46710.

Full text
Abstract:
Austenitic steel castings are currently being used in components for industrial gas turbine engines. Service experience has indicated a degradation of mechanical properties with extended exposures at elevated temperature. The purpose of this study was to characterize the grain boundary phases that develop during the casting processes as a likely explanation for the observed performance. In order to isolate these precipitates, a variety of electron microscopy characterization techniques were used to characterize their composition after various heat treatments and service exposure. In the baseli
APA, Harvard, Vancouver, ISO, and other styles
2

Putta, Ramesh N., and Malur N. Srinivasan. "Mathematical Model of Solidification in Continuous Cast Low Carbon Steel Billets." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12303.

Full text
Abstract:
This paper describes the relation between the Secondary Dendrite Arm Spacing (SDAS), Area of Mushy Zone with the Continuous Casting variables in low carbon steels during the solidification process in the mold zone. A Finite Element analysis of the heat flow equation, coupled with the solute distribution model and the dendrite growth model, enables the determination of the Secondary Dendrite Arm Spacing (SDAS). The CONBCAST.FOR program is developed in this work to analyze effects of process variables on the Secondary Dendrite Arm Spacing (SDAS), Area of Mushy Zone and Volume of the Bleed. Effor
APA, Harvard, Vancouver, ISO, and other styles
3

Neyhouse, Jeffrey R., Jose M. Aurrecoechea, J. Preston Montague, and John D. Lilley. "Cast Iron-Nickel Alloy for Industrial Gas Turbine Engine Applications." In ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68837.

Full text
Abstract:
Austenitic ductile iron castings have traditionally been used for gas turbine exhaust components that require castability, good machinability, low thermal expansion, and high strength at elevated temperatures. The achievement of optimum properties in austenitic ductile irons hinges on the ability of the foundry to produce nodular graphite in the microstructure throughout the component. In large, complex components, consistently producing nodular graphite is challenging. A high-nickel steel alloy that is suitable for sand castings has been recently developed for industrial gas turbine engine ap
APA, Harvard, Vancouver, ISO, and other styles
4

Qian, Haiyang, David Harris, and Timothy J. Griesbach. "Probabilistic Models of Reliability of Cast Austenitic Stainless Steel Piping." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57270.

Full text
Abstract:
Thermal embrittlement of cast austenitic stainless steel piping is of growing concern as nuclear power plants age. The difficulty of inspecting these components adds to the concerns regarding their reliability, and an added concern is the presence of known defects introduced during the casting fabrication process. The possible presence of defects and difficulty of inspection complicate the development of programs to manage the risk contributed by these embrittled components. Much work has been done in the past to characterize changes in tensile properties and fracture toughness as functions of
APA, Harvard, Vancouver, ISO, and other styles
5

Qian, Haiyang, David Harris, and Timothy J. Griesbach. "Probabilistic Models of Reliability of Cast Austenitic Stainless Steel Piping." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78710.

Full text
Abstract:
The concern of toughness reduction due to thermal embrittlement of cast austenitic stainless steel (CASS) piping is increasing as nuclear power plants age. Because of the large and variable grain size of the CASS materials, the ultrasonic inspection (UT) difficulties of the CASS components increases concerns regarding their reliability. Another added concern is the presence of potential defects introduced during the casting fabrication process. The possible presence of defects and difficulty of inspection complicate the development of programs to manage the risk contributed by these potentiall
APA, Harvard, Vancouver, ISO, and other styles
6

Fan Yang, Gui-rong Wang, and Qi-qiang Li. "Self-organizing optimization algorithm for cast planning of steel making-continuous casting." In 2014 International Conference on System Science and Engineering (ICSSE). IEEE, 2014. http://dx.doi.org/10.1109/icsse.2014.6887936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jin Hui, Li Jing, and Mo Jianhua. "Permissible casting defects calculation of cast steel nodes based on fracture mechanics." In 2011 International Conference on Electric Technology and Civil Engineering (ICETCE). IEEE, 2011. http://dx.doi.org/10.1109/icetce.2011.5776446.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Le Delliou, Patrick, and Sébastien Saillet. "Recent Improvements in Toughness Prediction of Cast Duplex Stainless Steel Components." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93114.

Full text
Abstract:
Abstract Thermal ageing of cast duplex stainless steel components is a concern for long-term operation of EDF nuclear power plants. The thermal ageing embrittlement results from the microstructural evolution of the ferrite phase (spinodal decomposition), and can reduce the fracture toughness properties of the steel. In addition, it is necessary to consider manufacturing quality and the possible occurrence of casting defects such as shrinkage cavities. In a context of life extension, it is important to assess the safety margins to crack initiation and crack propagation instability. One major in
APA, Harvard, Vancouver, ISO, and other styles
9

Crawford, Susan L., Matthew S. Prowant, Anthony D. Cinson, Michael R. Larche, Aaron A. Diaz, and Michael T. Anderson. "Ultrasonic Sound Field Mapping Through Coarse Grained Cast Austenitic Stainless Steel Components." In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-28745.

Full text
Abstract:
The Pacific Northwest National Laboratory (PNNL) has been involved with nondestructive examination of coarse-grained cast austenitic stainless steel (CASS) components for over 30 years. More recent work has focused on mapping the ultrasonic sound fields generated by low-frequency phased-array probes that are typically used for the evaluation of CASS materials for flaw detection and characterization. The casting process results in the formation of large-grained material microstructures that are nonhomogeneous and anisotropic. The propagation of ultrasonic energy for examination of these materia
APA, Harvard, Vancouver, ISO, and other styles
10

Klimeš, Lubomír, Josef Štětina, and Tomáš Mauder. "Steel Structure Prediction for Continuous Steel Casting by Means of a Parallel GPU-Based Heat Transfer and Solidification Model." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51425.

Full text
Abstract:
Continuous casting of steel is currently a predominant production method of steel, which is used for more than 95% of the total world steel production. An effort of steelmakers is to cast high-quality steel with a desired structure and with a minimum number of defects, which reduce the productivity. The paper presents our developed GPU-based heat transfer and solidification model for continuous casting, which is coupled with a submodel used for the prediction of the steel micro-structure. The model is implemented in CUDA/C++, which allows for rapid computing on NVIDIA GPUs. The time-dependent
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Steel, Cast. Steel, Cast Steel castings"

1

Charles E. Bates. Clean Cast Steel Technology, Phase IV. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/808765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bates, C. E., and J. A. Griffin. Clean cast steel technology. Final report. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/666192.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bates, D. J., S. R. Doctor, P. G. Heasler, and E. Burck. Stainless Steel Round Robin Test: Centrifugally cast stainless steel screening phase. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/5913079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chumbley, S. L. Clean cast steel technology. Determination of transformation diagrams for duplex stainless steel. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/850237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Churchill, Robin K., Jack H. Devletian, and Daya Singh. High Yield Strength Cast Steel With Improved Weldability. Defense Technical Information Center, 1991. http://dx.doi.org/10.21236/ada451557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Maziasz, P. J., A. Shyam, N. D. Evans, and K. Pattabiraman. Cast CF8C-Plus Stainless Steel for Turbocharger Applications. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/983008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

C. E. Bates and J. A. Griffin. Clean Cast Steel Technology - Machinability and Technology Transfer. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/765222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chopra, O. K. Studies of aged cast stainless steel from the Shippingport reactor. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/142529.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Crawford, Susan, Matthew Prowant, Anthony Cinson, Michael Larche, Aaron Diaz, and Michael Anderson. Phased Array Ultrasonic Sound Field Mapping in Cast Austenitic Stainless Steel. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1136237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Griffin, John, A. and Bates, Charles, E. Clean Cast Steel Technology: Effect of Micro-porosity on Tensile and Charpy Properties of Four Cast Steels. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/850235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Steel, Cast. Steel, Cast Steel castings' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography