Log in

Relevant bibliographies by topics / Steel development of the region / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Steel development of the region.

Dissertations / Theses on the topic 'Steel development of the region'

Author: Grafiati

Published: 5 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Steel development of the region.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Potterton, Kristin. "A Study of the Seismic Performance of Early Multi-Story Steel Frame Structures with Unreinforced Masonry Infill." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/41.

Full text

Abstract:

Steel frame construction with unreinforced masonry infill walls is a common system found in high-rise structures built in the late nineteenth and early twentieth centuries. Recorded performance of this dual system during seismic events shows that the structures are able to resist a high level of lateral loads without collapse, primarily because a majority of damage is confined to the infill walls instead of the gravity carrying frame. To better understand expected performance of this structural system in different seismic risk regions, a prototypical building was analyzed using modal and nonli

APA, Harvard, Vancouver, ISO, and other styles

2

Coyle, Neil Robert. "Development of fully composite steel-concrete-steel beam elements." Thesis, University of Dundee, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.270046.

Full text

Abstract:

Steel-Concrete-Steel (SCS) composite construction consists of two relatively thin steel plates with the space between filled with concrete. Various forms of this construction exist, using overlapping shear studs and single bar connectors to provide shear reinforcement to the concrete and provide a shear transfer at the interface. The problem with current systems that rely purely upon shear studs or bar connectors is that they are prone to slip between the steel faceplates and concrete core. This slip leads to a loss of composite action causing a loss of stiffness and a reduced fatigue life. An

APA, Harvard, Vancouver, ISO, and other styles

3

Spenceley, Gene Donald. "Process Development in Steel Research." Thesis, Teesside University, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.517466.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Archer, Lucas Andrew. "Development of high-performance cast steel crankshafts." Thesis, University of Iowa, 2016. https://ir.uiowa.edu/etd/2179.

Full text

Abstract:

To produce cast steel crankshafts, risering and gating systems are developed. Filling and solidification simulations of the steel crankshaft rigging are carried out to confirm that the rigging developed will produce a low porosity casting. A sand mold is created with Computer-aided design software, based on the developed crankshaft and rigging. Two prototype crankshafts are cast from the sand molds, and analyzed for porosity. The porosity analysis results are compared directly to the simulated porosity, and found to be in good agreement. From the analysis of the prototype crankshaft, rigging s

APA, Harvard, Vancouver, ISO, and other styles

5

N'emedi, Zsolt V. "Development of performance sections for cold-formed steel residential construction." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-08222009-040502/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kaminska, I. "Financial providing of ecological development of region." Thesis, Вид-во СумДУ, 2006. http://essuir.sumdu.edu.ua/handle/123456789/11655.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Downs, William M. "Modeling and Behavior of the Beam/Column Joint Region of Steel Moment Resisting Frames." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/46198.

Full text

Abstract:

The effect of panel zone (PZ) flexibility and yielding on the stiffness and strength of steel moment resisting frames (SMRF) has been the topic of numerous papers over the past thirty years. When properly detailed, the PZ is an excellent source of energy dissipation, even under large inelastic deformations. Due to these large inelastic deformations, the PZ region may also be a weak link in steel moment frame behavior. Because of the importance of PZ deformation in the behavior of steel frames, accurate modeling of this region is critical. Two of the most commonly used mathematical models f

APA, Harvard, Vancouver, ISO, and other styles

8

Kuforiji, Catherine. "Development of Steel-Alumina Composites for Wear Applications." Thesis, Université d'Ottawa / University of Ottawa, 2017. http://hdl.handle.net/10393/36149.

Full text

Abstract:

Ceramic-metal matrix composites produced by powder metallurgy provide a solution in engineering applications where materials with high wear resistance are required. In the mining industry, the wear of materials is a crucial and widely recognized industrial problem as over 50 % of components fail as a result of wear damage. Increasing the wear resistance of these components will contribute to a reduction in maintenance and thereby increase efficiency. In this present research, SS316L-50wt.% Al2O3 composites were fabricated using the powder metallurgy route. The effects of the powder metallurgy

APA, Harvard, Vancouver, ISO, and other styles

9

Speich, Marco. "The development of robotic polishing for steel moulds." Thesis, Glasgow Caledonian University, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.654758.

Full text

Abstract:

Plastic injection moulding is a commonly used process for the production of low-cost plastic parts in large numbers but for high-end products this process is hard to handle and expensive. The quality of the moulded parts is directly dependent on the surface quality of the mould Therefore, typically ultra-precision techniques like diamond turning or milling with a subsequent polishing, are used to generate a high quality surface finish. Ultra-precision techniques cannot process steel surfaces, thus nickel plating on the surface is required. The coating of the surface is an additional process st

APA, Harvard, Vancouver, ISO, and other styles

10

Johnson, Francis X. "Exploiting cross-level linkages to steer the bioenergy transition." Doctoral thesis, KTH, Energi och klimatstudier, ECS, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-155686.

Full text

Abstract:

This thesis develops the notion of the bioenergy transition as the long-term transformation of biomass from a local resource into a global commodity. An historical assessment is combined with interdisciplinary analysis that focuses especially on liquid biofuels and highlights the environmentally innovative case of bioethanol. The bioenergy transition is investigated from several different perspectives: technical-economic, socio-economic, socio-technical and political-economic. Linkages across different levels from household to global are analysed in relation to the effectiveness of bioenergy p

APA, Harvard, Vancouver, ISO, and other styles

11

Caccialupi, Alessandro. "Systems development for high temperature, high strain rate material testing of hard steels for plasticity behavior modeling." Thesis, Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-04082004-180051/unrestricted/caccialupi%5Falessandro%5F200312%5Fms.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Kazhura, Yury, Paulo Bento Maffei de Souza, and Heather Worosz. "Sustainable Community Development in the Baltic Sea Region." Thesis, Blekinge Tekniska Högskola, Avdelningen för maskinteknik, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2250.

Full text

Abstract:

This study examines Sustainable Community Development (SCD) in the context of the Baltic Sea Region. The research focuses on understanding a model for SCD piloted in Robertsfors, Sweden. The model is said to be transferable to any community around the world. This study seeks to understand the concepts and tools used in the Robertsfors Model. It also examines whether the model is strategic with regards to sustainability and whether it is successful in engaging the local community around these issues. Considerations for transferability are also addressed, focusing specifically on the Eastern Bal

APA, Harvard, Vancouver, ISO, and other styles

13

Almeida, Antonio. "ICT and sustainable development in an outermost region." Thesis, University of Newcastle Upon Tyne, 2008. http://hdl.handle.net/10443/133.

Full text

Abstract:

The aim of this research project is to understand the link between the adoption of ICT tools and the economic development of a peripheral region. This study is focused on the current status of adoption of ICT tools by a sample of SMEs operating in a peripheral island, the Autonomous Region of Madeira, Portugal. The overt optimism propagated by supra-national organisations such as the EU, stresses that the adoption of ICT tools constitutes one of the key strategic weapons in overcoming the peripheral/remote character and competitiveness problems of less-favoured regions. This argument is based

APA, Harvard, Vancouver, ISO, and other styles

14

Mbewe, Peter Binali Kamowa. "Development of analytical flexural models for steel fibre-reinforced concrete beams with and without steel bars." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/18088.

Full text

Abstract:

Thesis (MScEng)--Stellenbosch University, 2011.<br>ENGLISH ABSTRACT: There is an increasing demand for the development and use of innovative materials with reduced cost of construction while offering improved structural properties. Steel fibre reinforced concrete (SFRC) can be used as a structural material to substitute the conventional reinforcing bars partially or fully. However, there is little or no codified approach on the design procedures for SFRC members in the latest guidelines outlined in the draft 2010 Model code. It is against this background that analytical methods are deriv

APA, Harvard, Vancouver, ISO, and other styles

15

Budiakova, Olena. "Regional problems of economic development." Thesis, Книжкове видавництво ФОП Вишемирський В. С, 2021. https://er.knutd.edu.ua/handle/123456789/19414.

Full text

Abstract:

The key role in the development of the regional economy is played by the ratio between consumption and accumulation, which is one of the most important general economic proportions of social reproduction. Consequently, the main theoretical premise in solving the problem of social reproduction is the possibility and necessity of combining taking into account the features of the first and second approaches, or imparting the main (dominant) one of them.

APA, Harvard, Vancouver, ISO, and other styles

16

Freeman, Lora B. "Development of an optimized short-span steel bridge package." Morgantown, W. Va. : [West Virginia University Libraries], 2005. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4310.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2005.<br>Title from document title page. Document formatted into pages; contains xv, 141 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 139-141).

APA, Harvard, Vancouver, ISO, and other styles

17

Rommetveit, Tarjei. "Development of Non-invasive Ultrasound Inspection Techniques through Steel." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for produktutvikling og materialer, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15096.

Full text

Abstract:

Using normal incident, pulse-echo ultrasound is a well-established approach in the non destructive testing and evaluation community for measuring wall thickness and detecting defects. If the sensors are permanently installed, this opens for a high sensitivity to relatively small changes in the wall thickness. At present, intrusive probe technology is commonly used for rapidly determining the corrosion rate of steel structures. However, non-intrusive methods are often desired. The first part of this thesis focuses on developing a new ultrasound inspection technique in relation to high resolutio

APA, Harvard, Vancouver, ISO, and other styles

18

Haddad, Naseem Issa Abdallah. "The development of microstructure in duplex stainless steel welds." Thesis, University of Cambridge, 1990. https://www.repository.cam.ac.uk/handle/1810/221890.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

NUNES, LEONARDO MIRANDA. "DEVELOPMENT OF MICROALLOYED STEEL FOR THE PRODUCTION OF REBAR." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2009. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=32736@1.

Full text

Abstract:

O desenvolvimento de um aço microligado para a produção de vergalhões nervurados, busca atender a modernização das estruturas de concreto armado e a industrialização na construção civil que solicitam novos desenvolvimentos nas técnicas de construção e nos materiais aplicados. As barras de aço nervuradas são um dos principais produtos empregados na produção de peças e estruturas de concreto armado sendo usadas largamente por todo o mundo. A otimização da aplicação final, a necessidade de manter baixos custos de produção e atender a combinação de alta resistência com grande ductilidade em um mat

APA, Harvard, Vancouver, ISO, and other styles

20

Marks, Jordan (Jordan Christine). "Development of sodium silicate adhesives for electrical steel bonding." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/89976.

Full text

Abstract:

Thesis: S.B., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2014.<br>Cataloged from PDF version of thesis. Vita.<br>Includes bibliographical references (page 46).<br>Inorganic adhesives have several benefits over traditional joining methods for joining electrical steels used in magnetic cores of numerous industrial applications. As insulators with very high melting temperatures, the adhesives offer the possibility of increasing the efficiency of these machines. The aim of this project was to characterize sodium silicates as adhesives for such applicati

APA, Harvard, Vancouver, ISO, and other styles

21

Rajagopal, Niranjan. "Development of Guidelines for Warm Forging of Steel Parts." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1388410779.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Smith, Ryan Thomas. "Development of a Nitrogen-Modified Stainless-Steel Hardfacing Alloy." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1440156184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Masindi, Rabelani Rofhiwa. "Microstructure and texture development in AISI430 ferritic stainless steel." Master's thesis, University of Cape Town, 2017. http://hdl.handle.net/11427/25436.

Full text

Abstract:

AISI 430 ferritic stainless steel (FSS) is the most widely used FSS alloy due to good resistance to stress corrosion cracking. Owing to the chemical composition range, AISI 430 alloys undergo a partial phase transformation of ferrite to austenite when subjected to hot rolling temperatures. Consequently, the alloys consist of ferrite and austenite during processing. The presence of austenite and ferrite influences the microstructure evolution and texture development during hot rolling and subsequent annealing heat treatments. Two AISI 430 FSS heats of varying austenite volume fraction were used

APA, Harvard, Vancouver, ISO, and other styles

24

Abbas, Usama. "Materials Development of Steel-and Basalt Fiber-Reinforced Concretes." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for konstruksjonsteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-24224.

Full text

Abstract:

Concrete is a structural composite material with excellent properties when subjected to compression. But the poor ability to resist tensile stresses forces the concrete to be used with reinforcement. Commonly, large continuous steel bars have been applied as reinforcement since mid-1800s to carry the tensile loads. Placing the steel bars takes many man-hours, which contributes to a significant part of the total concrete costs. By eliminating the reinforcement part of the construction work, the costs can be reduced considerably. Fibers have been incorporated into building materials since

APA, Harvard, Vancouver, ISO, and other styles

25

Junior, Jose Anchieta Dantas. "Desenvolvimento econÃmico e a polÃtica industrial do CearÃ: O Caso da companhia siderÃrgica de PecÃm." Universidade Federal do CearÃ, 2010. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=9886.

Full text

Abstract:

nÃo hÃ<br>Traz uma apresentaÃÃo das principais teorias de desenvolvimento econÃmico e do modelo adotado pelo Brasil para se desenvolver, tendo como estratÃgia a industrializaÃÃo de seu territÃrio. Ao mesmo tempo, discute a inserÃÃo do Nordeste brasileiro nessa dinÃmica, o que possibilita compreender a trajetÃria do CearÃ e as escolhas feitas pelo governo estadual para promover o crescimento e o conseqÃente desenvolvimento de sua economia. A partir do estudo da Companhia SiderÃrgica de PecÃm, em implantaÃÃo no Estado, faz uma abordagem crÃtica do papel desempenhado pela atraÃÃo de investimentos

APA, Harvard, Vancouver, ISO, and other styles

26

Habib, Mohammad Abdul-Kareim. "Development of agriculture in Tihama: Regional growth and development in the Jizan region, Saudi Arabia." Diss., The University of Arizona, 1988. http://hdl.handle.net/10150/184511.

Full text

Abstract:

The coastal plain called Tihama forms the principal agricultural zone which makes Jizan one of the main agricultural regions in the Arabian Peninsula. The Saudi government has keenly appreciated this wealth of Jizan and explored developing its potential in the mid-1940's. However, the pace of agricultural development in Jizan has been very slow, and an actual decline has been registered in traditional agriculture. This stagnation is caused by constraints imposed by unfavorable "institutional arrangements," i.e., those incentives and disincentives which are the product of the political economy

APA, Harvard, Vancouver, ISO, and other styles

27

Bell, David J. "Development of a new cold-formed steel roof truss system." Thesis, Queensland University of Technology, 1997. https://eprints.qut.edu.au/36009/1/36009_Bell_1997.pdf.

Full text

Abstract:

This thesis reports on a research and development project which was aimed at developing a new cold-formed steel roof truss system for Textor Metal Industries Pty Ltd under a National Teaching Company Scheme. It presents details of analysis, design, and testing methods used in this project and their results. This Master of Engineering Degree research thesis was undertaken part-time during the project duration of two years, and includes in part some research details which are confidential. The new cold-formed steel roof truss system was designed for non-cyclonic permissible design winds

APA, Harvard, Vancouver, ISO, and other styles

28

Al-Fawzan, Fawzan Abdulrahman Abdulla. "The recent agricultural development in Hail region: Saudi Arabia." Thesis, University of Southampton, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.253458.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

CARVALHO, JULIANA BARROS. "DEVELOPMENT OF GAS DETECTION SYSTEMS IN THE INFRARED REGION." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=28494@1.

Full text

Abstract:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>O presente trabalho aborda o desenvolvimento de sistemas de detecção de gases na região do infravermelho. Conceitos fundamentais sobre a teoria eletromagnética da luz e como o sinal luminoso pode ser absorvido por gases é apresentado na etapa inicial. Em seguida, são apresentados novos métodos de detecção utilizando fibras ópticas através de simulações eletromagnéticas destas fibras e por observações de medições em laboratório. O software utilizado é o Optiwave. Um sistema de

APA, Harvard, Vancouver, ISO, and other styles

30

Atkova, I. (Irina). "Analysis of the trade development strategy:the Murmansk region case." Master's thesis, University of Oulu, 2013. http://urn.fi/URN:NBN:fi:oulu-201301241011.

Full text

Abstract:

Trade between Finland and Russia plays an important role in the economies of both countries. However, lack or insufficiency of relevant information concerning trading procedures in Russia, and in the Murmansk region in particular, frequently hinders the deployment of the existing business opportunities and makes the process of entering the regional market rather complicated demotivating perspective Finnish investors. To address this problem, the current study explores the trade development strategy of the Murmansk region and identifies its influence on the cross-border trade with Finland. This

APA, Harvard, Vancouver, ISO, and other styles

31

Шкарупа, Олена Василівна, Елена Васильевна Шкарупа, Olena Vasylivna Shkarupa, A. Tolbatov, and I. Burych. "The assessment of green potential of the region development." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/40840.

Full text

Abstract:

In the informational society and transformational changes in the economy there is a need in the personalities and ways of making decisions that have the ability to self-development, have an unusual approach and can make a new quality in social and economic life of society. The term "creative" denotes creativity, which "not only put forward the idea, but also brings them to the practical results." In English literature, as a rule, the term «creativity» represent all that is directly related to the creation of something new, the actual process of the creation; product of this process, it

APA, Harvard, Vancouver, ISO, and other styles

32

Harlan, Tyler Russ. "Entrepreneurship and development in Urumqi, Xinjiang Uyghur autonomous region /." Connect to thesis, 2009. http://repository.unimelb.edu.au/10187/5026.

Full text

Abstract:

Thesis (MPhil)--University of Melbourne, Dept. of Resource Management and Geography, 2009.<br>Typescript. Appendix III in Chinese language and Appendix IV in Uyghur language. Includes bibliographical references (p. 133-151)

APA, Harvard, Vancouver, ISO, and other styles

33

Hatefipour, Saeid. "Facilitation of Industrial Symbiosis Development in a Swedish Region." Licentiate thesis, Linköpings universitet, Industriell miljöteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-85825.

Full text

Abstract:

Today, sustainability of industrial regions and industrial networks is a challenge for business developers, policy makers, regional planners, local and governmental authorities and academic researchers. Because growing cities and industrial regions worldwide are intertwined with social, environmental, and economic advantages/disadvantages and challenges, in recent decades the ambition of industrial development and economic growth without environmental destruction has become a worldwide topic. To address this issue, a number of theories and pathways such as Industrial Ecology (IE) and its subfi

APA, Harvard, Vancouver, ISO, and other styles

34

Hale, Angela. "Community management of water resources in the southern region, Adelaide /." Title page, table of contents and abstract only, 1997. http://web4.library.adelaide.edu.au/theses/09ENV/09envh161.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Pariser, Gerhard Carolus. "Modeling the austenite to ferrite phase transformation for steel development /." Aachen : Shaker, 2006. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014913109&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Balh, Nisreen. "Development of seismic design provisions for steel sheathed shear walls." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=86724.

Full text

Abstract:

Seismic design provisions for cold-formed steel sheathed (CFS) shear walls are not available in the NBCC or in the CSA-S136 Standard. This limits engineers in designing with such walls in seismic zones across Canada. The objective of this research was to develop design provisions for steel sheathed shear walls constructed with CFS framing.<br>To develop such standards, 54 walls of various configurations were tested at McGill University in the summer of 2008. The walls varied in framing and sheathing thickness, detailing and aspect ratio. The tests carried out at McGill were used to obtain desi

APA, Harvard, Vancouver, ISO, and other styles

37

Bates, A. "The development of microstructure in electron beam welded ferritic steel." Thesis, University of Cambridge, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.596470.

Full text

Abstract:

There are many potential advantages to welding structural ferritic steels with a power-beam process such as electron beam welding. These include low distortion, high welding speed, and computer control. The microstructure developed by a typical EB weld is poor from a mechanical properties perspective, however, and this limits the applications in which it is used. This work investigates the microstructures developed in an EB welded structural steel with the aim of further understanding and promoting a sound microstructure. A single steel composition was welded using a wide range of conditions.

APA, Harvard, Vancouver, ISO, and other styles

38

Johansson, Kenny. "Process and microstructure development of a LPBF produced maraging steel." Thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-79004.

Full text

Abstract:

Additive manufacturing (AM) has the possibility of producing complex-shaped components which can not be produced by conventional manufacturing methods. This gives the opportunity for designers to freely think outside the design spectra which is otherwise limited by conventional manufacturing methods. AM of metal has rapidly been developed for the last three decades, and they now are reaching industrial acceptance levels, metal feedstock for use in AM is also rapidly growing. AM of metals is especially of interest for the tooling industry. The design freedom which AM offers the tooling manufact

APA, Harvard, Vancouver, ISO, and other styles

39

Nagy, Gabor I. "Development of an optimized short-span steel bridge design package." Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5994.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2008.<br>Title from document title page. Document formatted into pages; contains xiv, 153 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 113-114).

APA, Harvard, Vancouver, ISO, and other styles

40

Sowards, Jeffrey William. "Development of a chromium-free consumable for joining stainless steel." Columbus, Ohio : Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1237845645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Pan, Yong. "Analytical Development of A Plastic Hinge Detail for Steel SMFs." Diss., The University of Arizona, 2006. http://hdl.handle.net/10150/194268.

Full text

Abstract:

A modular plastic hinge seismic special detail has been developed for use in steel special moment frames (SMFs). The aim of the special detail design is to dissipate seismic energy through stable yielding of a beam "link" in plastic hinge region. Reliable and repeatable energy dissipation at high ductility is assured through the elimination of weld failure modes, and the mitigation of local buckling and high multi-axis restraint. A casting process is used to configure the modular detail directly to meet these performance objectives. The primary features of the link region are an isolated flang

APA, Harvard, Vancouver, ISO, and other styles

42

Moody, Mark K. "Development of novel TRIP strip steel grades for automotive applications." Thesis, Swansea University, 2009. https://cronfa.swan.ac.uk/Record/cronfa43191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Roos, Stefan. "Process Development for Electron Beam Melting of 316LN Stainless Steel." Licentiate thesis, Mittuniversitetet, Institutionen för kvalitets- och maskinteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-37840.

Full text

Abstract:

Additive manufacturing (AM) is a technology that inverts the procedure of traditional machining. Instead of starting with a billet of material and removing unwanted parts, the AM manufacturing process starts with an empty workspace and proceeds to fill this workspace with material where it is desired, often in a layer-by-layer fashion. Materials available for AM processing include polymers, concrete, metals, ceramics, paper, photopolymers, and resins. This thesis is concerned with electron beam melting (EBM), which is a powder bed fusion technology that uses an electron beam to selectively mel

APA, Harvard, Vancouver, ISO, and other styles

44

Simmons, Richard Thomas. "Steam, steel and Lizzie the elephant : the steel industry, transport technology and urban development in Sheffield, 1800-1914." Thesis, University of Leicester, 1995. http://hdl.handle.net/2381/27859.

Full text

Abstract:

This thesis examines the relationships between the development of transport systems and manufacturing technology, and the effect of these and other factors on industrial location within cities. To study these relationships in isolation from the effects of state planning, the focus is the evolution of Sheffield's steel industry from 1800-1914, and the consequences for the emerging city. Industrial location and urban theories are compared, and the psychology underlying decision making is discussed. Variables proposed by these theories as influences on location decisions are reviewed, including a

APA, Harvard, Vancouver, ISO, and other styles

45

Mohamadou, Baba. "REER misalignment and economic growth in the CAEMC Region." Master's thesis, University of Cape Town, 2013. http://hdl.handle.net/11427/29042.

Full text

Abstract:

The CFA Franc real exchange rate is frequently suspected to be overvalued as a result of recent prolonged appreciation of the Euro (the anchor currency). This situation is popularly associated with lose of competitiveness and several studies have tried to establish the relationship between growth and misaligned or overvalued real exchange rates. This study used a panel data cointegration techniques to evaluate the growth effects of real effective exchange rate misalignments for the Central African Economic and Monetary Community (CAEMC) using time series data from 1999-2010. To achieve this ob

APA, Harvard, Vancouver, ISO, and other styles

46

Varadarajan, Ashok. "Dross formation mechanism and development of wear resistant scraper in 55Al-1.5Si-Zn coating bath." Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=6022.

Full text

Abstract:

Thesis (Ph. D.)--West Virginia University, 2008.<br>Title from document title page. Document formatted into pages; contains xi, 106 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 101-106).

APA, Harvard, Vancouver, ISO, and other styles

47

Al-Ogaili, Ghassan Saadoon Dawood. "Fundamental approach for fouling growth mechanisms comprehension at a stainless steel surface : development of antifouling coating for stainless steel." Thesis, Lille 1, 2014. http://www.theses.fr/2014LIL10109/document.

Full text

Abstract:

Le présent travail porte sur un problème crucial de l’industrie laitière:l'encrassement causé par le lait pendant un traitement thermique. L'objectif de ce travail était de comprendre le mécanisme de dépôt et de croissance de l’encrassement laitier à la surface de conduites en acier inoxydable afin de pouvoir élaborer une surface qui permette de limiter, voire d’empêcher cet encrassement. La morphologie et composition de la couche d'encrassement dépendent fortement de la solution d'encrassement. Quand de l'eau avec une dureté nulle est utilisée, la couche d'encrassement est fine, lisse et homo

APA, Harvard, Vancouver, ISO, and other styles

48

Al-Ogaili, Ghassan Saadoon Dawood. "Fundamental approach for fouling growth mechanisms comprehension at a stainless steel surface : development of antifouling coating for stainless steel." Electronic Thesis or Diss., Lille 1, 2014. http://www.theses.fr/2014LIL10109.

Full text

Abstract:

Le présent travail porte sur un problème crucial de l’industrie laitière:l'encrassement causé par le lait pendant un traitement thermique. L'objectif de ce travail était de comprendre le mécanisme de dépôt et de croissance de l’encrassement laitier à la surface de conduites en acier inoxydable afin de pouvoir élaborer une surface qui permette de limiter, voire d’empêcher cet encrassement. La morphologie et composition de la couche d'encrassement dépendent fortement de la solution d'encrassement. Quand de l'eau avec une dureté nulle est utilisée, la couche d'encrassement est fine, lisse et homo

APA, Harvard, Vancouver, ISO, and other styles

49

Gqoboka, Lithalethu. "An assessment of capital expenditure, required to establish a steel distribution business, as a barrier to entry into the steel distribution industry." Master's thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/28423.

Full text

Abstract:

The South African steel industry plays a vital role in the economy of the country. It is seen to be a major source of employment for the South African people, and key to sustainable economic development for the country. In recent years however, the South African steel industry has been faced with a number of challenges resulting in the closure of some steel companies and consequently the loss of many jobs. It is posited that small and medium enterprises (SMME’s) can minimise these negative effects, balance out the job losses and keep the industry sustainable. However, the barriers to entry in

APA, Harvard, Vancouver, ISO, and other styles

50

Chan, Lai-shan, and 陳麗珊. "Development of low cost airlines in the Asia Pacific region." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B2992277X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!