To see the other types of publications on this topic, follow the link: Steel section.

Journal articles on the topic 'Steel section'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Steel section.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

R. Nora, Rakesh, Umarfarukh D. Masud, and Maske Ravi G. "Comparison between Conventional (Angular) Steel Section and Tubular Steel Section." International Journal of Engineering Research 4, no. 10 (2015): 539–41. http://dx.doi.org/10.17950/ijer/v4s10/1005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vipin, V. P., and P. A. Krishnan Dr. "A FINITE ELEMENT STUDY ON THE PERFORMANCE OF CORRUGATED STEEL SECTIONS UNDER COMPRESSION." International Journal of Emerging Technologies and Innovative Research Volume 4, Issue 5 May-2017 eISSN: 2349-5162 (2017): 249–51. https://doi.org/10.5281/zenodo.583727.

Full text
Abstract:
Corrugated steel sections are having a wide variety of applications in engineering fields like civil, mechanical, aviation, etc. The unique properties of corrugated steel sections make them a better option compared to the conventional thin steel sections. In the current study behaviour of thin steel shells with corrugations made of mild steel plates under compression is investigated using finite element software ABAQUS. The corrugated sections and the conventional sections under study are having the same area of cross section. For the corrugated sections, trapezoidal profile was used with corr
APA, Harvard, Vancouver, ISO, and other styles
3

Kocur, Robert, and Tomasz Krykowski. "New design for steel crane suspension beams in steel halls." Inżynieria i Budownictwo LXXXI, no. 1 (2025): 15–21. https://doi.org/10.5604/01.3001.0055.0137.

Full text
Abstract:
This paper presents a new type of cross-section for overhead crane beams. A comparative analysis of the new cross-section was carried out with the classical cross-sections used to date. Beams whose cross-sectional areas and consequently weights were very similar were tested. Maximum deformations and critical moments of lateral torsional buckling were used as the main criteria for evaluating the effectiveness of the cross-sections. The new cross-section, which is characterised by having 2 boxes separated by a web at the compression flange, proved to be the most resistant to global loss of stabi
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Yeong Huei, Shahrin Mohammad, and Yee Ling Lee. "Comparison on Section Properties and Flexural Behaviour for Cold-Formed Steel Built-Up Section." Applied Mechanics and Materials 735 (February 2015): 80–84. http://dx.doi.org/10.4028/www.scientific.net/amm.735.80.

Full text
Abstract:
This paper performs analytical and experimental investigation on the section properties of locally produced cold-formed steel sections. Effective width method given by BS EN1993-1-3 is used to calculate the section properties for two slender cold-formed steel channel sections, namely KS200C20 and KS250C20. Local buckling and distortional buckling are taken into account in the calculation. Effective width method has significantly reduced the full sectional area and thus gives a relative lower value for the sectional resistance of cold-formed steel channel sections. The analytical results is com
APA, Harvard, Vancouver, ISO, and other styles
5

Han, Lin-Hai, and You-Fu Yang. "Influence of Concrete Compaction on the Behavior of Concrete Filled Steel Tubes with Rectangular Sections." Advances in Structural Engineering 4, no. 2 (2001): 93–100. http://dx.doi.org/10.1260/1369433011502381.

Full text
Abstract:
Tests on sixteen concrete filled steel tubes to investigate the influence of concrete compaction methods on the section capacities of concrete filled steel tubes with rectangular sections are reported. The main objectives of these tests were twofold: firstly, to report a series of tests on composite stub columns under different concrete compaction methods; and secondly, to investigate the influence of concrete compaction on the section capacities and the modulus of elastic of concrete filled steel tubes with rectangular sections. It was found that better compaction of concrete resulted in high
APA, Harvard, Vancouver, ISO, and other styles
6

Mengane, Ms Supriya P. "Review on Light Gauge Steel I- Section under Compression with Flange Stiffener." International Journal for Research in Applied Science and Engineering Technology 12, no. 6 (2024): 2065–68. http://dx.doi.org/10.22214/ijraset.2024.62981.

Full text
Abstract:
Abstract: Cold-formed steel structures has increased rapidly in recent times due to significant improvements to manufacturing technologies and development of thin, high strength steels. The use of cold-formed thin walled steel structures has greater than before in recent years, and some built-up section members are aggravated and widely used for their excellent structural behaviors. The differences of global, local and distortional buckling behaviors among members with built-up and single sections are investigated. This paper presents a detailed review on cold-formed steel channel sections, wh
APA, Harvard, Vancouver, ISO, and other styles
7

Ahmed, Hiba Shihab, Abbas Allawi, and Riyadh Hindi. "Experimental Investigation of Composite Circular Encased GFRP I-Section Concrete Columns under Different Load Conditions." Engineering, Technology & Applied Science Research 14, no. 5 (2024): 17286–93. http://dx.doi.org/10.48084/etasr.8521.

Full text
Abstract:
Pultruded materials made of Fiber-Reinforced Polymer (FRP) come in a broad range of shapes, such as bars, I-sections, C-sections, etc. FRP materials are starting to compete with steel as structural materials owing to their great resistance, low self-weight, and cheap maintenance costs, especially in corrosive conditions. This study aims to evaluate the effectiveness of a novel concrete Composite Column (CC) using Encased I-Section (EIS) as a reinforcement in contrast to traditional steel bars by using Glass Fiber-Reinforced Polymer (GFRP) as I-section (CC-EIS) to evaluate the effectiveness of
APA, Harvard, Vancouver, ISO, and other styles
8

Handhal, Mohammed M., Ali W. Abdulghani, and Montaqa M. Al-Haydary. "Structural Behavior of Steel Reinforced Concrete Joint Under Flexural Loads." Civil Engineering Journal 9, no. 3 (2023): 714–30. http://dx.doi.org/10.28991/cej-2023-09-03-015.

Full text
Abstract:
This research investigates the behavior of RC beam column joints reinforced with steel sections. The study deals with the strengthening of RC joints by different steel sections. The investigation included a theoretical analysis through a performing of simulation of beam-column joints laced with steel sections by using FEA. Implementation of the parametric study included reinforcing the concrete beam with steel sections in many configurations. Shapes and length were the most variables in this study, and many shapes were used, such as I-section, box section, and plates, beside the concrete compr
APA, Harvard, Vancouver, ISO, and other styles
9

Natsheh, Sufian H., and Craig C. Menzemer. "Built-Up Closed-Rib Steel Orthotropic Bridge Decks." CivilEng 3, no. 4 (2022): 960–78. http://dx.doi.org/10.3390/civileng3040054.

Full text
Abstract:
A new built-up closed-rib section is proposed that may improve the installation, performance, and durability of orthotropic steel bridge decks. The rib is composed of two partial or whole standard hot-rolled steel sections which are connected by a steel plate. The concept is used to design a built-up closed-rib replacement for the Benjamin Franklin Bridge deck. In addition, section performance was compared with the actual bulb section as well as a typical trapezoidal section through finite element simulations. The analyses indicate that the built-up section has smaller stress concentration val
APA, Harvard, Vancouver, ISO, and other styles
10

Kamal, Ahmed Youssef, and Nader Nabih Khalil. "Composite concrete beam with multi-web cold-formed steel section." Challenge Journal of Concrete Research Letters 10, no. 2 (2019): 20. http://dx.doi.org/10.20528/cjcrl.2019.02.001.

Full text
Abstract:
Lately, structural engineers use cold-formed steel sections (CFS) in buildings due to its light-weight and easy shaping. Encasing the cold-formed steel sections by concrete avoiding the structure elements some of its disadvantages especially buckling. This paper reports an experimental test program for beams with a multi-web cold-formed steel section encased by reinforced concrete. Eleven (full-scale) specimens have tested under mid-span concentrated load, the experimental test program designed to cover many cold-formed steel section variables such as (web number, web height, and the steel sec
APA, Harvard, Vancouver, ISO, and other styles
11

De’nan, Fatimah, and Nor Salwani Hashim. "Study on Bending Behaviour of Triangular Web Profile Steel Section by Finite Element Analysis." Applied Mechanics and Materials 94-96 (September 2011): 1539–44. http://dx.doi.org/10.4028/www.scientific.net/amm.94-96.1539.

Full text
Abstract:
A triangular web profile (TRIWP) steel section is a built-up section made up of two flanges connected to a web plate of triangular profile. This paper describes the study on the bending performance in major (Ix) and minor (Iy) axes of Triangular Web Profile (TRIWP) compared to flat web (FW) steel sections. A number of finite element models were developed using finite element software LUSAS version 14.3. Thin shell element which is a family of shell element in 3D dimension was chosen to represent the element type of the model. Two sizes of FW as control specimens and two sizes of TRIWP steel se
APA, Harvard, Vancouver, ISO, and other styles
12

Zhou, Li, Yong Huang, Bo Chen, Song Hu, and Chenyun Zhang. "Seismic Behavior of Large-Span Open-Web Floors Consisting of I-Shaped Steel Chords and Steel Tube Webs." Advances in Civil Engineering 2020 (October 20, 2020): 1–14. http://dx.doi.org/10.1155/2020/8872447.

Full text
Abstract:
A composite large-span open-web floor (COF) system is introduced in this paper, which is composed of I-shaped steel chords, steel tube webs, and concrete slabs. One COF specimen was fabricated and tested under cyclic loadings. The failure process and hysteretic curve of the specimen were discussed in detail. Moreover, a finite element (FE) model was developed and verified by experimental results. A parametric study was performed to examine the effects of the concrete strength, steel strength, section steel thickness, and structural height. The parametric study demonstrates that the effects of
APA, Harvard, Vancouver, ISO, and other styles
13

M. Md. Tahir, A. Sulaiman, and A Saggaff. "Structural Behaviour of Trapezoidal Web Profiled Steel Beam Section using Partial Strength Connection." Electronic Journal of Structural Engineering 8 (June 1, 2008): 55–66. http://dx.doi.org/10.56748/ejse.8100.

Full text
Abstract:
Connections are usually designed as pinned which associated with simple construction or rigid which is associated with continuous construction. However, the actual behaviour falls between these two extreme cases. The use of partial strength or semi-rigid connections has been encouraged by EC3 code and studies on hot-rolled steel sections on semi-continuous construction for braced steel frames have proven that substantial savings in steel weight and the overall construction cost. The objective of this paper is to present the performance of full scale testing of sub-assemblage steel beam and iso
APA, Harvard, Vancouver, ISO, and other styles
14

Galinska, Tatyana, Dmytro Ovsii, and Mykola Ovsii. "The Combining Technique of Calculating the Sections of Reinforced Concrete Bending Elements Normal to its Longitudinal Axis, Based on the Deformation Model." International Journal of Engineering & Technology 7, no. 3.2 (2018): 123. http://dx.doi.org/10.14419/ijet.v7i3.2.14387.

Full text
Abstract:
Methodical foundations for calculating the strength of normal sections of various types of steel-concrete bending elements are proposed, which allow calculating in dependence on the stress-strain state (SSS) at the moment of destruction of its components (concrete and structural reduced steel profile). The basis of the calculation allows solving two problems: the problem of determining the optimal section of reduced structural steel profile (RSSP), which reinforced the section of steel-concrete bending elements; the task of verifying the load-bearing capacity of a normal reduced section of var
APA, Harvard, Vancouver, ISO, and other styles
15

M. Bahlol, Fahad, Amer M. Ibrahim, Wissam D. Salman, and Humam A. Abdulhusain. "Effect of Steel Tube Thickness on Flexural Behavior of Concrete Composite Beams Using Different Section Shapes." Diyala Journal of Engineering Sciences 12, no. 4 (2019): 41–49. http://dx.doi.org/10.24237/djes.2019.12404.

Full text
Abstract:
The current paper aims to investigate the effect of steel tube thickness on the structural behavior of concrete composite beams with different steel tube sections. The experimental work of this study included a series of bending tests. The loading type used to study this effect on bending behavior of steel tubes was simply supported beam tested by two points load. Six composite beam specimens were performed and tested up to failure using three shapes of steel section (hexagonal, square and rectangular), every two specimens have the same shape of steel section. The type of shear connector was t
APA, Harvard, Vancouver, ISO, and other styles
16

I. Lapenko, O., O. V. Shevchenko, and N. Masud. "Compression Work of Steel Reinforced Concrete Columns." International Journal of Engineering & Technology 7, no. 3.2 (2018): 229. http://dx.doi.org/10.14419/ijet.v7i3.2.14408.

Full text
Abstract:
The article deals with the calculation of steel reinforced concrete columns compression and verification of local stability in fixed formwork. It is concluded that it is expedient to calculate the total stability for the resulted sections, and when checking local stability – to follow the instructions Eurocode 4. When checking the local stability of steel sheets, working as part of reinforced concrete structures, the Eurocode 4 guidelines should be followed, while taking into account the following requirements: leave out of account on the local stability of the concrete cross-section (the stee
APA, Harvard, Vancouver, ISO, and other styles
17

Anishchenko, O. S., A. V. Hushchyn, V. V. Kukhar, and A. G. Prysiazhnyi. "Taking into account springing in art forging of volute products." Reporter of the Priazovskyi State Technical University. Section: Technical sciences, no. 42 (May 27, 2021): 66–74. https://doi.org/10.31498/2225-6733.42.2021.240578.

Full text
Abstract:
The article shows that bending of volutes consists of two stages. At the stage of loading there is an elastic and plastic deformation of the workpiece. Elastic deformation is described by a linear function (Hooke’s law), plastic deformation is described by an exponential function of strain stress in the workpiece. In the second stage of bending a partial restoration of the original shape of the workpiece takes place. For a volute in the form of an Archimedes spiral, which is conditionally divided into 5 sections, an algorithm for calculating the increase in radii and bending angles of each sec
APA, Harvard, Vancouver, ISO, and other styles
18

Spirande, K., R. Sheme, and M. Iakymenko. "ANALYSIS OF THE EFFICIENCY OF THE DESIGN PARAMETERS OF I-SECTIONAL STEEL-REINFORCED CONCRETE MODIFIED BEAMS." Municipal economy of cities 3, no. 191 (2025): 377–83. https://doi.org/10.33042/2522-1809-2025-3-191-377-383.

Full text
Abstract:
The authors investigated the effectiveness of the new proposed type of steel-reinforced concrete modified beams using an engineering calculation method based on a deformation model taking into account the physical nonlinearity of concrete and steel properties. The peculiarity of the proposed structural solution of the steel-reinforced concrete bending element is that a reinforced concrete shelf is used as the compressed part of the section, and a rolled steel profile is used as a t-beam element with a perforated wall. This allows redistribution of the cross-sectional material, concentrating it
APA, Harvard, Vancouver, ISO, and other styles
19

Zhang, Junfeng, Bo Li, Anqi Li, and Shiyun Pang. "Critical Stress Determination of Local and Distortional Buckling of Lipped Angle Columns under Axial Compression." Buildings 12, no. 6 (2022): 712. http://dx.doi.org/10.3390/buildings12060712.

Full text
Abstract:
In recent years, cold-formed steel has been widely used in prefabricated steel structures, and the common cross-section forms are mainly complex lipped angle sections. However, there is a lack of design guidance for such a cross-section due to the complex geometric property. The restraint between adjacent plates cannot be considered proper for the traditional analytical method. Therefore, it is particularly important to study the stability bearing capacity of angle sections with complex edges under axial compression. In this paper, the finite strip software (CUFSM5) was used to analyze the cri
APA, Harvard, Vancouver, ISO, and other styles
20

Li, Yufei, Dajiang Zhu, Jian Yang, et al. "Research on the Multifactor Synergistic Corrosion of N80 and P110 Steel Tubing in Shale Gas Wells in Sichuan Basin." Processes 12, no. 5 (2024): 920. http://dx.doi.org/10.3390/pr12050920.

Full text
Abstract:
We aimed to investigate the corrosion patterns and the main controlling factors of N80 steel and P110 steel tubing under different sections. Conducting weight loss corrosion experiments for 168 h using high-temperature and high-pressure autoclaves to simulate the corrosion behavior of two types of casing materials, N80 steel and P110 steel, in different well sections under specific conditions of CO2 content, chloride ion concentration, temperature, pressure, and sulfate-reducing bacteria population in highly mineralized formation water. X-ray diffraction (XRD), scanning electron microscopy (SE
APA, Harvard, Vancouver, ISO, and other styles
21

Anwar, Naveed, and Mohammad Qaasim. "Parametric Study of Reinforced Concrete Column Cross-Section for Strength and Ductility." Key Engineering Materials 400-402 (October 2008): 269–74. http://dx.doi.org/10.4028/www.scientific.net/kem.400-402.269.

Full text
Abstract:
Several parameters and corresponding performance of reinforced concrete column cross-sections of different shapes (square, rectangular, circular, T-shape, I-shape, cross-shape, L-shape and C-shape) under various loading conditions have been studied in order to determine the suitable and optimum cross-sections for strength and ductility. In each cross-section shape, parameters include compressive strength of concrete (f’c), tensile strength of steel (fy), steel ratio (As/Ag), and angle of bending. In order to demonstrate the behavior and performance of the sections in terms of strength and duct
APA, Harvard, Vancouver, ISO, and other styles
22

Li, Jianwen, Xiaoyu Wang, Li Chen, and Wenbo Lu. "Bearing Capacity of Light-Steel Compound Section and Steel Columns under Axial Compression." Advances in Civil Engineering 2022 (April 8, 2022): 1–23. http://dx.doi.org/10.1155/2022/8061015.

Full text
Abstract:
In the international trend of vigorously developing low-carbon economy and green buildings, environmental protection and conservation have received increased attention in the construction field. Light steel, as an environmental protection material, has gradually become a key direction in the architectural field. The axially compressed columns forming the wall skeleton in the light steel structure usually adopt two cross-sectional forms, namely, cold-formed thin-walled steel built-up cross-section and independent profiled steel cross-section. The cold-formed thin-walled steel cross-section is d
APA, Harvard, Vancouver, ISO, and other styles
23

Ramakrishnan, Roshni, Dr Dode Prasad Kumar, and Avinash . "STUDY ON STRUCTURAL DESIGN OPTIMIZATION OF STEEL BUILDING." International Journal of Engineering Applied Sciences and Technology 6, no. 10 (2022): 202–7. http://dx.doi.org/10.33564/ijeast.2022.v06i10.026.

Full text
Abstract:
Pre-Engineered Building which has been gaining popularity over the past few years employs builtup sections for members as against hot rolled steel sections. The members’ section profiles match closely with the bending moment diagram across the frames as the depth of the sections is greatly dependant on the moment across the sections and hence we see tapered section profiles in such building systems. A detailed study is carried out on the final optimized section profiles and the analysis results for the present paper. As a part of research paper “Comparitive Study of Pre-Engineered Building and
APA, Harvard, Vancouver, ISO, and other styles
24

Saleh, Mohammed M., Dlshad K. Ahmed, and Ali R. Yousef. "The Comparative Study of Biaxial Bending Analysis of Steel Sections Using AISC and Eurocode Approaches." Cihan University-Erbil Scientific Journal 4, no. 2 (2020): 25–32. http://dx.doi.org/10.24086/cuesj.v4n2y2020.pp25-32.

Full text
Abstract:
ABSTRACT
 This study investigates the capacity of the steel section using both AISC and Eurocode approaches by Robot Structure Analysis software. Three types of steel sections were subject to biaxial bending by applying loads to both main axes and examined by both approaches. The concept of Fisher was also adopted as an approach. The findings suggested that the Eurocode approach is more conservative in the design of steel sections subject to biaxial bending as it takes into account the level at which the load is applied, the type of the section whether rolled or welded and its height-to-w
APA, Harvard, Vancouver, ISO, and other styles
25

Yun, Xiang, Yufei Zhu, and Leroy Gardner. "Experimental investigation of steel frames made of hybrid steel welded I‐sections." ce/papers 6, no. 3-4 (2023): 1668–73. http://dx.doi.org/10.1002/cepa.2518.

Full text
Abstract:
AbstractAn experimental investigation into the structural behaviour of steel frames made up of hybrid steel welded I‐section members is presented in this paper. The tested hybrid steel welded I‐section profile had quenched and tempered S690 steel flanges and an S355 steel web. The experimental programme comprised four two‐dimensional, single storey, single bay frames subjected to different combinations of horizontal and vertical loading, thus enabling different beam, sway as well as combined beam and sway plastic collapse mechanisms to be examined. The frames were fully laterally restrained us
APA, Harvard, Vancouver, ISO, and other styles
26

Glauz, Robert, and Benjamin Schafer. "Generalized Elastic Lateral-Torsional Buckling of Steel Beams." Engineering Journal 62, no. 1 (2025): 027–42. https://doi.org/10.62913/engj.v62i1.1336.

Full text
Abstract:
A concise review is provided of the classical elastic lateral-torsional buckling moment for steel beams as utilized in the AISC Specification (2022). Rather than make assumptions regarding the cross-section properties, the derivation is provided in its general form for an arbitrary steel beam—that is, one that may be asymmetric and may include any manner of varying geometry, thickness, or cross-section shape. The cross-section properties that underpin the calculation are fully detailed. The assumptions that are inherent in the classical derivations (no shear, no cross-section distortion, etc.)
APA, Harvard, Vancouver, ISO, and other styles
27

Hu, Xibing, Rui Chen, Yuxuan Xiang, Yafang Chen, and Qingshan Li. "Mechanical Behavior of Damaged H-Section Steel Structure." Advances in Civil Engineering 2021 (May 28, 2021): 1–15. http://dx.doi.org/10.1155/2021/8247670.

Full text
Abstract:
Steel structures are usually damaged by disasters. According to the influence law of the damage on the elastic modulus of steel obtained by the mechanical test of damaged steel, the average elastic moduli of H-section steel members were analyzed. The equations for calculating the average elastic moduli of damaged H-section steel members at different damage degrees were obtained. By using the analytical cross-sectional method, the cross-sectional M-Φ-P relationships and the dimensionless parameter equations of the H-sections in the full-sectional elastic distribution, single-sided plastic distr
APA, Harvard, Vancouver, ISO, and other styles
28

S.Logesh, R.Ramesh, and Padmanaban I. "Compatability Behaviour on Cold Formed Steel for I Section and C Section in Variable Parameters." International Journal of Innovative Technology and Exploring Engineering (IJITEE) 10, no. 7 (2021): 68–73. https://doi.org/10.35940/ijitee.G8863.0510721.

Full text
Abstract:
This Study represents compatibility on Cold formed steel in I-Section beams and C-section beams with variable length parameters was 1000mm, 1500mm, 2000 mm under simply supported end condition subjected to uniformly distributed loading. The Cold formed steel is of shell type in Numerical simulation is carried out using the Software ABAQUS. For validation the series of parameters studies have been carried out using the numerical model of different parameters, such as the effect of length, width, thickness. CFS I-Section steel in various thickness of 1mm, 2mm, 3mm and 4mm with same loading condi
APA, Harvard, Vancouver, ISO, and other styles
29

Subha, Sinha, Mishra Shivangi, Saurabh Shashank, Kumar Rajan, and Kumar Rahul. "Economical Study on the Use of Hollow Steel Sections in Light Industrial Sheds." International Journal of Innovative Technology and Exploring Engineering (IJITEE) 9, no. 12 (2020): 23–28. https://doi.org/10.35940/ijitee.K7818.1091220.

Full text
Abstract:
Hollow steel sections can withstand forces leading to high buckling, more effectively as compared to their open sections counterparts. The distribution of mass about the polar axis is more uniform in hollow sections as compared to open sections. This provides it a higher strength to weight ratio. Hollow sections have been proved more efficient as a truss and roof members. In present work, Hollow steel sections have been used in industrial shed building and compared with their open section counterpart. The scenarios of hollow sections are examined for change in height, change in bay length and
APA, Harvard, Vancouver, ISO, and other styles
30

Al-Thabhawee, Hayder Wafi. "Experimental investigation of composite steel–concrete beams using symmetrical and asymmetrical castellated beams." Curved and Layered Structures 9, no. 1 (2022): 227–35. http://dx.doi.org/10.1515/cls-2022-0019.

Full text
Abstract:
Abstract This study aims to investigate the behavior of concrete slabs acting compositely with symmetrical and asymmetrical castellated beams. Stud connectors are used to connect the concrete slab and steel section. The use of castellated steel beams to build up composite steel-concrete beams is now common practice in building construction. Five simply supported composite beams were examined under two-point loading. Two specimens built up from standard steel beams were used as control specimens and three specimens were built up from castellated steel beams. One of these specimens was built up
APA, Harvard, Vancouver, ISO, and other styles
31

Sun, Haixing, Yundong Hao, Pei Pei, and Yanfeng Zhou. "An Efficient Finite Element Analysis Method for Shear Resistance and Stability of Corrugated Steel Web Bridges." Advances in Computer and Materials Scienc Research 3, no. 1 (2025): 133. https://doi.org/10.70114/acmsr.2025.3.1.p133.

Full text
Abstract:
An efficient finite element analysis method for shear resistance and stability of corrugated steel web bridges are proposed. By calculating the shear stress of the corrugated steel web at the key sections of the box girder, the shear strength of the corrugated steel web at each section is checked. The local buckling, global buckling and combined buckling critical shear stresses of corrugated steel webs are calculated, and the stability checking of corrugated steel webs in each section is carried out. The results show that the design of the corrugated steel web of the bridge meets the requireme
APA, Harvard, Vancouver, ISO, and other styles
32

Kwon, In Kyu. "A Study of Fire Resistance According to Boundary Condition of Ordinary Grade Structural Steels." Applied Mechanics and Materials 510 (February 2014): 97–100. http://dx.doi.org/10.4028/www.scientific.net/amm.510.97.

Full text
Abstract:
Building construction has been developed with an increase of steel application at main members, but the weakness should be resolved with a proper fire resistance. The fire engineering method is regarded as an alternative way to evaluate the fire resistance with mechanical and thermal properties at high temperature. In this paper, the fire resistance of H-section built with ordinary grade structural steels such as SS 400 and SM 490 those are representative structural steels at the construction market were analyzed by the difference of boundary conditions. The study showed that the H-section mad
APA, Harvard, Vancouver, ISO, and other styles
33

Chung, Chen Tat, Jian Jun Moy, Cher Siang Tan, and Arizu Sulaiman. "BENDING RESISTANCE OF HIGH STRENGTH HOT-ROLLED STEEL UNIVERSAL COLUMN SECTION." Malaysian Journal of Civil Engineering 35, no. 2 (2023): 35–39. http://dx.doi.org/10.11113/mjce.v35.19969.

Full text
Abstract:
The most commonly found steel grades in the market are S 275 and S 355 However, recent advancement in the welding techniques allows for the development of high-strength steel for higher grades up to S 700 with reasonable cost and quality to construct heavy-loaded and long spanned structures. To facilitate the selection of the section sizes in accordance to Eurocode 3 Standard, this research focusses on investigate and validate the bending resistance, Mc,Rd and lateral torsional buckling resistance, Mb,Rd of a hot-rolled steel universal column section (UKC) from common steel grades (S 275 and S
APA, Harvard, Vancouver, ISO, and other styles
34

Zhang, Da Li, Yu Wen Bao, Jian Hui Gao, Lin Xiao, and Xiao Zhen Li. "Research on Load Transfer Mechanism of Steel-Concrete Joint Section of Hybrid Beam Cable-Stayed Bridge." Advanced Materials Research 639-640 (January 2013): 216–19. http://dx.doi.org/10.4028/www.scientific.net/amr.639-640.216.

Full text
Abstract:
The WuSu Bridge of HeiXiaZi Island is a hybrid girder cable-stayed bridge with one pylons and single cable plane. Based on the similarity principle, a 1:3 reduced scale test model of steel-concrete joint section was designed to study the load transfer mechanism and verify the rationality. The test model was loaded according to the serviceability limit state, and the stress distribution of control sections and main members were obtained. The finite element analysis on the test model was carried out and the load transfer mechanism was studied by the way of combining the test results and the FEA
APA, Harvard, Vancouver, ISO, and other styles
35

Kostic, Svetlana M., and Biljana Deretic-Stojanovic. "Bending Resistance of Composite Sections with Nonductile Shear Connectors and Partial Shear Connection." Advances in Civil Engineering 2018 (September 24, 2018): 1–14. http://dx.doi.org/10.1155/2018/5350315.

Full text
Abstract:
The paper presents the nonlinear section analysis for composite steel-concrete beams with different degrees of shear connection. The analysis is fiber based, i.e., integration over the cross section is performed numerically, and any uniaxial nonlinear material model can be assigned to the steel and concrete parts of the cross section or to the reinforcement bars. The analysis assumed full interaction between steel and concrete and therefore, is suitable for analysis of composite steel-concrete beam cross sections with nonductile shear connectors. Its accuracy is verified on few experimental re
APA, Harvard, Vancouver, ISO, and other styles
36

Li, Jinhua, Zhan Quan, Yao Zhang, Liyuan Cao, and Chunxiang Li. "Computational Fluid Dynamics Based Kriging Prediction on Flutter Derivatives of Flat Steel Box Girders." Symmetry 14, no. 7 (2022): 1304. http://dx.doi.org/10.3390/sym14071304.

Full text
Abstract:
An investigation on the flutter derivative prediction of flat steel box girders is carried out based on CFD simulations. Firstly, by taking the flat steel girder section of Qingshan Yangtze River Bridge as the basic section and considering its width and height as the design variables of cross-section shape, the design domain of cross-section shape is defined by controlling the possible variation range of cross-section design variables. A small number of cross-sections are selected for the calculation of aerodynamic forces by CFD simulations. Secondly, according to the aerodynamic lift and mome
APA, Harvard, Vancouver, ISO, and other styles
37

Hsu, Wei Ting, and Shu Ti Chung. "Analyzing the Combined Effects of Axial Loads and Bending Moments on Unequal-Angle Steel Members." Key Engineering Materials 986 (August 29, 2024): 105–10. http://dx.doi.org/10.4028/p-wfvak0.

Full text
Abstract:
Angle steel is commonly used in inclined bracing components such as transmission towers. Due to its inherent section characteristics, unequal angle steel undergoes angular rotation when subjected to eccentric axial pressure, resulting in a change in the direction of action along the X and Y axes. In comparison to equal angle steel, the analysis of unequal angle steel is more complex. In design, particular attention should be given to whether the angle steel section is compact or noncompact, with a significant emphasis on the impact of the width-to-thickness ratio on strength. In study analyzed
APA, Harvard, Vancouver, ISO, and other styles
38

Wen, Xin Li, Jian Peng Gao, and Yuan Guo La. "Common Defect Analysis for Large Section Special Steel Forging." Materials Science Forum 898 (June 2017): 1208–14. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1208.

Full text
Abstract:
In order to Figure the common defect in large section special steel forging and find the solution, systematic study was carried out on hundreds of large section special steel forgings in a domestic famous steel mill. The steels included: low-carbon steel Q345D/E, medium-carbon steel 27SiMn, high-carbon steel GCr15SiMn, stainless steel 20Cr13. Both the amount and type of all the defect in the above steel were calculated and analyzed. The results showed that the common defects of the steel were slags, inclusions, loose (cavity) and inner cracks. The evolution of the cavity in the ingot during fo
APA, Harvard, Vancouver, ISO, and other styles
39

Al-Azawi, Raad K., and Yousif S. Jafar. "NONLINEAR ANALYSES OF COMPOSITE PREFLEX STEEL BEAMS ENCASED IN CONCRETE." Journal of Engineering 15, no. 03 (2009): 3868–90. http://dx.doi.org/10.31026/j.eng.2009.03.05.

Full text
Abstract:
In the present study, a nonlinear three-dimensional finite element analysis has been used to predict the load-deflection and moment-rotation behaviors of composite encased beams consisting of preflex steel sections using the finite element computer program (ANSYS V. 10). Composite encased beams are analyzed and a comparison is made with available experimental moment-rotation curves, good agreement with the experimental results is observed. Camber of steel section is introduced on the steel section of the composite beams encased in concrete. It is found that using of preflex section can increas
APA, Harvard, Vancouver, ISO, and other styles
40

Ibrahim, Amer M., Wissam D. Salman, and Fahad M. Bahlol. "Flexural Behavior of Concrete Composite Beams with New Steel Tube Section and Different Shear Connectors." TJES Vol26 No.1 2019 26, no. 1 (2019): 51–61. http://dx.doi.org/10.25130/tjes.26.1.07.

Full text
Abstract:
Steel hollow sections used widely in many engineering applications as structural members. This paper aims to present a study about the flexural behavior of composite beams with steel tubes sections through a series of bending tests in order to study and examine the influence of using different shapes of steel tube section (square, rectangular and hexagonal) with the same shear connector type (headed stud or angle or perfobond) on the flexural behavior and the bending properties of these sections. As well as study the effect of using different shear connectors types (headed stud, angle and perf
APA, Harvard, Vancouver, ISO, and other styles
41

Hirohata, M., and K. Jármai. "An Investigation on Combined Section by Steels with Different Strengths for Bridge Girder." IOP Conference Series: Materials Science and Engineering 1252, no. 1 (2022): 012043. http://dx.doi.org/10.1088/1757-899x/1252/1/012043.

Full text
Abstract:
Abstract A basic investigation was carried out in this study to propose a new structure for steel bridge girders by using a combined section composed of steels with different strengths. SM400 as an ordinal strength level steel was selected as the base material for the I-section girder model. It was assumed that the lower flange of the I-section was replaced with an inverted T-shaped member by welding. This member was provided by the different steel with SM400A. The dimension of the inverted T-shaped member was selected to decrease the cross-sectional area to the original section. Furthermore,
APA, Harvard, Vancouver, ISO, and other styles
42

Deepak, MS, and VM Shanthi. "Section bending resistance of new Hybrid Double-I-Box Beams." Advances in Structural Engineering 21, no. 11 (2018): 1676–95. http://dx.doi.org/10.1177/1369433217753938.

Full text
Abstract:
This article contains original works of testing and numerical validation on section bending resistance of new innovative built-up thin-walled metal Hybrid Double-I-Box Beam sections when subjected to local buckling. The cross section of Hybrid Double-I-Box Beam section is distinctive, which has advantages of both an ‘I’ section and a closed-box section. A total of 24 sections in three series that includes 8 homogeneous sections and 16 hybrid sections were tested under four-point bending. The varying parameters considered in the test specimens were as follows: first, hybrid parameter ratio, tha
APA, Harvard, Vancouver, ISO, and other styles
43

Wu, Sheng. "Mechanical Properties of New Type Cold-Formed Steel Box-Shaped Component Welding Section Members." Applied Mechanics and Materials 351-352 (August 2013): 601–9. http://dx.doi.org/10.4028/www.scientific.net/amm.351-352.601.

Full text
Abstract:
Cold-formed steel box-shaped section has the special features in both its mass center and moment center unification as double symmetry section and its outstanding advantage in moment and torsion rigidity. This paper presents a new kind of cold-formed steel box-shaped component welding sections, that is flanges opposite welding box-shaped component section DS. The mechanical properties such as buckling modes, load carrying capacity, rigidity, ductility and correlation curves of new section members which are subjected to axial compression, flexure, combined compression and bending have been anal
APA, Harvard, Vancouver, ISO, and other styles
44

Keintjem, Militia, Riza Suwondo, and Made Suangga. "Efficiency Assessment of Cruciform Steel Columns: Balancing Axial Capacity and Weight." Engineering, Technology & Applied Science Research 15, no. 2 (2025): 21342–47. https://doi.org/10.48084/etasr.10107.

Full text
Abstract:
Cruciform steel columns, also known as king and queen cross sections, have gained attention in structural engineering for their ability to overcome the limitations of traditional I-sections and H-sections. These limitations include reduced stability due to slenderness effects and excessive material usage in tall columns. Designed to enhance axial load capacity while minimizing weight, cruciform sections offer a more efficient, cost-effective, and sustainable alternative for modern construction. This study assesses the efficiency of cruciform steel columns by comparing their design axial capaci
APA, Harvard, Vancouver, ISO, and other styles
45

Wang, Jie, Aimin Xu, Jin Di, Fengjiang Qin, and Pengfei Men. "Experimental and Numerical Study of Membrane Residual Stress in Q690 High-Strength Steel Welded Box Section Compressed Member." Materials 17, no. 10 (2024): 2296. http://dx.doi.org/10.3390/ma17102296.

Full text
Abstract:
High-strength steel (HSS) members with welded sections exhibit a notably lower residual compressive stress ratio compared with common mild steel (CMS) members. Despite this difference, current codes often generalize the findings from CMS members to HSS members, and the previous unified residual stress models are generally conservative. This study focuses on the membrane residual stress distribution in Q690 steel welded box sections. By leveraging experimental results, the influence of section sizes and welding parameters on membrane residual stress was delved into. A larger plate size correlat
APA, Harvard, Vancouver, ISO, and other styles
46

Hussain, Hussain Fadhil, Alaa Hussein Al-Zuhairi, Zainab Kareem Al-Mamory, and Ali Hussein Ali Al-Ahmed. "Behavior of Glass Fiber Reinforced Polymer Concrete Panels." Engineering, Technology & Applied Science Research 15, no. 2 (2025): 20760–69. https://doi.org/10.48084/etasr.9100.

Full text
Abstract:
Glass Fiber Reinforced Polymer (GFRP) bars have gained popularity as a corrosion-resistant alternative to traditional steel reinforcement in Reinforced Concrete (RC) elements. This study investigates the flexural behavior of PRC panels reinforced with GFRP bars. The study variables included the GFRP reinforcement ratio and the number of embedded steel section distributions. Six concrete panels were fabricated, each measuring 2500 mm in length, with a rectangular cross-section of 750 mm in width and 150 mm in thickness. All panels were reinforced with GFRP bars and divided into two groups based
APA, Harvard, Vancouver, ISO, and other styles
47

Zang, Shu Jun, Juan Juan Li, Xiao Qiang Yin, and Jian Bin Zhang. "Microstructure Observation of the Tensile Fractured 430 Ferritic Stainless Steel." Advanced Materials Research 887-888 (February 2014): 228–32. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.228.

Full text
Abstract:
The article studies on sections microstructure of 430ferritic stainless steel after tension, the tensile temperatures are the 1073K, 1173K, 1223K, 1273K, 1323K and 1423K. The transverse sections (vertical tensile direction) of fractured specimens microstructure of 430ferritic stainless steel were observed and compared with those of longitudinal sections (parallel tensile direction). Moreover, we compare microstructure of transverse section specimens with the salt water-cooled condition and air-cooled condition. The optical micrograph of fractured tensile specimens of 430stainless steel after c
APA, Harvard, Vancouver, ISO, and other styles
48

Yu, Yufan. "Research on The Force Analysis and Application of Slender Stainless Steel Column Sections." Transactions on Engineering and Technology Research 4 (December 20, 2024): 351–57. https://doi.org/10.62051/vaq2r828.

Full text
Abstract:
Stainless steel, as a green building material, has many advantages, including aesthetically pleasing shapes, good corrosion resistance, stable mechanical properties, long service life, low cost, and easy maintenance. It is often used in structural construction, such as buildings and infrastructure. One of the typical cross-sectional forms of stainless steel used in construction is the slender stainless steel section. Slender stainless steel columns have high strength, which is consistent with the high material hardness and obvious stress hardening characteristics of stainless steel. Therefore,
APA, Harvard, Vancouver, ISO, and other styles
49

Mughnie, Hidayat, Budiman Budiman, Rachmad Irwanto, and Muhammad Taufiq Al Hafidz. "NUMERICAL STUDY ON BEHAVIOUR OF COLD-FORMED STEEL UNLIPPED CHANNEL SUBJECT TO AXIAL COMPRESSION." International Journal of Civil Engineering and Infrastructure 2, no. 2 (2023): 57. http://dx.doi.org/10.24853/ijcei.2.2.57-65.

Full text
Abstract:
Innovation in obtaining construction materials that are efficient and applicable to various conditions is a challenge for researchers. Cold-formed steel is a material breakthrough in construction that has advantages over hot-rolled steel. Many studies have been carried out on Cold-formedsteel subjected to various loadings to examine the behavior and capacities of the sections. This study aims to investigate the behavior and section capacity of cold-formed steel unlipped channels due to axial compression loads. This research begins with conducting a literature study, then carrying out numerical
APA, Harvard, Vancouver, ISO, and other styles
50

Dineshkumar, R., S. E. Manu, Saroj Kumar Yadav, and R. Vetturayasudharsanan. "Study on Composite Column Under Monotonic and Cyclic Loading." IOP Conference Series: Earth and Environmental Science 1125, no. 1 (2022): 012022. http://dx.doi.org/10.1088/1755-1315/1125/1/012022.

Full text
Abstract:
Abstract Nowadays, composite beams and columns were used as structural members for their higher strength and rigidity for load-carrying structures. Generally, the concrete-encased composite column has a compound section formed by the steel section and the surrounding concrete will be made by a composite. Based on the studies of steel encased concrete sections based on experimental and computational analysis over static and dynamic load cases shows advantages over the conventionally use structural steel or reinforced concrete in terms of ductility and shear resistance. The structure can experie
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!