Relevant bibliographies by topics / Stereolitografie

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books

Academic literature on the topic 'Stereolitografie'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Stereolitografie.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Stereolitografie"

1

Furmanek, Aleksander Filip. "The possibilities of using the stereolithography method of additive manufacturing in the architectural design." Mechanik, no. 12 (December 2016): 1920–21. http://dx.doi.org/10.17814/mechanik.2016.12.553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

ALCAN, Toros, and Bekir BAYSAL. "Stereolitografi Yöntemi İle Elde Edilen Üç Boyutlu Katı Biyomodelin Hassasiyetinin İncelenmesi." Turkish Journal of Orthodontics 18, no. 3 (December 2005): 195–203. http://dx.doi.org/10.13076/1300-3550-18-3-195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rinaldi, M. "Chirurgia implantare computer guidata: software, modelli stereolitografici e guide chirurgiche." Italian Oral Surgery 11, no. 5 (December 2012): 63–73. http://dx.doi.org/10.1016/j.ios.2011.06.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

AKPEK, Ali. "Stereolitografi ile üç boyutlu (3B) olarak biyobaskılanmış yapay kalp kapakçıklarının biyouyumluluk özelliklerinin analizi." Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 2018, no. 2018 (April 6, 2018). http://dx.doi.org/10.17341/gazimmfd.416396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

AKTİTİZ, İ̇smail, Kadir AYDIN, and Alparslan TOPCU. "Stereolitografi (SLA) Tekniği ile Basılan 3 Boyutlu Polimer Yapılarda İkincil Kürleme Süresinin Mekanik Özelliklere Etkisi." Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, December 31, 2020, 949–58. http://dx.doi.org/10.21605/cukurovaummfd.868895.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Stereolitografie"

1

Peml, Luboš. "Návrh a realizace 3D tiskárny s vysokým rozlišením tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231524.

Full text
Abstract:
This thesis deals with the design and realisation of the stereolithographic 3D printer using DLP projector. The work describes the selection of suitable components for the printer´s mechanical construction and manufacturing of this construction, the solution of printer´s electronics and creation of the printer´s host software and firmware. Recommendations based on executed experiments for the parameters´ values settings have been given here.
APA, Harvard, Vancouver, ISO, and other styles
2

Schoula, Šimon. "Konstrukční návrh 3D tiskárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254305.

Full text
Abstract:
The thesis is focused on structural design of machine prototype for 3D print. Used technology is stereolithography. Machine design must be easy to built and low cost. First part of thesis is especially focused on FDM printers, because the design of my printer is more similar to them. Based on systems analysis are defined all parts of printer. Next part of thesis describes SLA technology from which proceed another requirements for machine. Second part contains final structural design of machine including necessary calculations and simulations. Another parts of thesis are focused on control system of printer including software, risk analysis and technical drawings of selected machine parts.
APA, Harvard, Vancouver, ISO, and other styles
3

Valenová, Ludmila. "Optimalizace 3D tisku a post-processingu pokročilé keramiky na bázi kalcium fosfátu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442598.

Full text
Abstract:
The diploma thesis is related to the preparation of hydroxyapatite complex structures by additive manufacturing known as Lithography based ceramics manufacturing – LCM. A photosensitive suspension containing hydroxyapatite particles was used for 3D printing of ceramic complex structures. The influence of printing parameters on the resulting macrostructure, microstructure, density, and dimensional accuracy was evaluated. The aim was to obtain ceramic components without delamination of the layers and optimise following post-processing steps (cleaning and thermal treatment). It was found that the exposure time has a significant effect on the dimensional accuracy of printed parts. During observation microstructure of printed parts, a microporosity at the interface of printed layers, which can cause delamination of several layers was identified. High-temperature dilatometry showed different temperature of beginning densification process in the longitudinal and perpendicular directions to the layers. That could be an initiation mechanism for delamination of the layers. X-ray diffraction analysis determined a single-phase composition of powder in photosensitive suspension and sintered parts. A commercial product LithaSol 20 was suggested as a suitable cleaning agent and efficiency of the ultrasound field for cleaning was demonstrated. Based on the thermogravimetric analysis an optimized cycle of heat treatment was designed. The optimisation led to time saving (49 hours), while maintaining density, dimensional accuracy and macrostructure of the 3D printed structures.
APA, Harvard, Vancouver, ISO, and other styles
4

Chrástek, Jan. "Design 3D tiskárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319491.

Full text
Abstract:
Diploma thesis is focused on design of stereolithography 3D printer, which includes new technology and innovations to achive larger workspace and easy and comfortable manipulation. Great part of thesis is focused on shaping and aesthetic effect with respect of functional, safety, ergonomic and technical claims.
APA, Harvard, Vancouver, ISO, and other styles
5

Bottalico, Davide. "Prototipazione rapida: dalla stereolitografia al bioprinting." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Find full text
Abstract:
Questa trattazione, divisa concettualmente in tre parti, ha lo scopo di introdurre e spiegare il principio base delle principali tecnologie di Prototipazione Rapida esistenti, le sue maggiori applicazioni in ambito aerospaziale, ingegneristico e medico, approfondendo infine la moderna tecnica del bioprinting.
APA, Harvard, Vancouver, ISO, and other styles
6

Gricová, Monika. "Stereolitografická tiskárna pro výrobu buněčného kultivačního zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400959.

Full text
Abstract:
Stereolithography printing is one of the most popular 3D printing technologies. This printers use a UV light source for photopolymer curing and can be used for a wide range of applications with high precision and excellent print quality. Commercially available printers do not allow the modifications of the optical and mechanical parameters of the instrument. For this reason, a DLP printer has been designed to allow the optical system modifications and thus changing the printing field and resolution. Another advantage is the possibility to modify already designed mechanical parts. The DLP printer has been designed and tested. The recommended printer parameters settings are listed, which are based on the performed experiments.
APA, Harvard, Vancouver, ISO, and other styles
7

D'Avino, Giulia. "Valutazione della sostenibilità di prodotti realizzati con tecnica stereolitografica attraverso l’analisi del ciclo di vita"." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text
Abstract:
La sostenibilità, un tema sempre più discusso a livello mondiale, e l’Additive Manufacturing, una tecnologia in via di sviluppo e dalle potenzialità produttive acclarate, sono i principali argomenti oggetto di studio di questa tesi, trattati nei primi due capitoli dell'elaborato. Nel terzo capitolo si sviluppa uno studio che ha come obiettivo individuare una metodologia che consenta di intervenire sul miglioramento degli impatti ambientali in relazione alla specifica geometria e orientamento dei pezzi realizzati con tecnica stereolitografica; un'ulteriore obiettivo della tesi è stato quello di evidenziare che già nella fase preliminare di progettazione è possibile integrare la sostenibilità nel processo decisionale. Infine vengono riportati i risultati e le interpretazioni del modello realizato.
APA, Harvard, Vancouver, ISO, and other styles
8

Tamdjom, Totoungue Jean Ledoux. "Studio sperimentale dell'area di fattibilità di un sistema stereolitografico per la realizzazione di canali di dimensioni micrometriche." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Find full text
Abstract:
In questo elaborato si presenteranno i risultati di uno studio sperimentale, che mira a determinare l’area di fattibilità di un processo di stereolitografia per la realizzazione di canali di dimensioni micrometriche. L’attenzione è stata focalizza su questo tema per via delle numerose applicazioni che usano i canali micrometrici, per esempio, nella realizzazione dei dispositivi detti lab-on-a-chip, che vengono impiegati in numerosi campi come la sicurezza alimentare, il monitoraggio ambientale, applicazioni farmaceutiche, diagnosi mediche in generale e applicazioni genomiche (l’elettroforesi capillare e il DNA). Obbiettivo di questa tesi di laurea è valutare la capacità di stampare micro-canali dell’ultima versione della macchina stereolitografica Formlabs (Form2), che impiega una delle principali tecnologie additive. Quindi, si dovrà capire attraverso le variabili di processo, scelte opportunamente (spessore dello strato, valori nominali della larghezza e dell’altezza, ed orientamenti attorno agli assi x e y), la larghezza e l’altezza minime stampabili per avere un canale aperto e continuo, caratterizzato dalle dimensioni desiderate e a disegno. Usando dei provini opportunamente preparati, studieremo, in seguito, l’effetto dei parametri di processo considerati sull’errore percentuale misurato sulla larghezza e sull’altezza del canale ottenuto.
APA, Harvard, Vancouver, ISO, and other styles
9

Salvato, Stefano. "Tecniche ed applicazioni di stampa 3D in ambito chirurgico." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2017.

Find full text
Abstract:
L’impiego della stampa 3D in ambito medicale, nell’ultimo decennio, si sta espandendo sempre più grazie al progresso tecnologico e all’abbattimento dei costi di produzione. Nel presente elaborato verranno descritte le tecniche e le applicazioni di stampa 3D in ambito chirurgico. Verranno analizzati i principi di generazione di oggetti 3D, dall’acquisizione dell’immagine fino alla produzione di un oggetto tridimensionale. Si continuerà con la descrizione delle principali tecniche di fabbricazione di modelli 3D, in particolare la stereolitografia STL (StereoLithography Apparatus), per poi arrivare alle principali applicazioni mediche. Si esamineranno i modelli di stampanti 3D più utilizzati in ambito medico e saranno approfondite le applicazioni della stampa 3D in neurochirurgia e in urologia per il tumore alla prostata. I principali vantaggi, nell’utilizzo della stampa 3D in ambito medicale, sono stati riscontrati nella formazione medica, nella preparazione operatoria, nella comunicazione medico-paziente e nella riduzione del tempo d’intervento chirurgico. Lo svantaggio principale da superare per utilizzare maggiormente la stampa 3D è l’abbattimento dei costi.
APA, Harvard, Vancouver, ISO, and other styles
10

Dutta, Chaudhury Nandan. "An investigation on the possibility for bandwidth improvement of dielectric antennas via modification of their geometry." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-285571.

Full text
Abstract:
The dielectric antenna is an interesting alternative to a metallic antenna. This is mainlydue to its low manufacturing cost and the possibility to fabricate complex antennageometry with the aid of additive manufacturing (AM). Sophisticated AM technologyprovides new degrees of freedom in shaping the outer and inner geometry of antennas.This feature can be utilized to optimize various properties of antenna, such as itsbandwidth, radiation pattern etc, while maintaining a compact geometry.This master thesis investigates the possibility of improving the bandwidth of acompact dielectric antenna by modifying its geometry. Specifically, dielectricresonator antennas (DRAs) have been considered here. In this connection, twoembedded cylindrical DRAs operating within 8 GHz-17 GHz frequency band havebeen designed and simulated using Ansys HFSS. For the first design (Design-1), abandwidth (corresponding to reflection coefficient ≤ -10dB) of approximately 63%has been obtained and the second design (Design-2) has a bandwidth (correspondingto reflection coefficient ≤ -10dB) of about 57%. However, in terms of radiationcharacteristics, the performance of Design-2 has been found to be superior comparedto Design-1, mainly due to its symmetrical geometry. Furthermore, the two designshave been compared to an existing compact rectangular embedded DRA. It has beenfound that both Design-1 and Design-2 have comparatively wider bandwidth. Withrespect to the radiation characteristics, the performance of the reference antenna andDesign-2 are similar. While, the radiation performance of the reference antenna isfound to be better than Design-1.
Dielektriska antenner är ett intressant alternativ till metalliska diton. Detta beror delspå lägre tillverkningskostnader men också, tack vare additiva tillverkningsmetoder,på grund av möjligheten att använda komplexa geometrier. De senaste årens framsteginom additiv tillverkning har öppnat upp nya möjligheter vid designen av den externaoch den inre geometrin hos dielektriska antenner. Detta kan utnyttjas till att optimeraolika aspekter hos antennen, exempelvis bandbredd och strålningsmönster, utan attpåverka de yttre måtten.Denna avhandling studerar möjligheten att förbättra bandbredden hos dielektriskaresonansantenner (DRA) genom att modifiera deras inre. Två cylindriska DRA:er,verksamma inom 8-17 GHz, har designats och simulerats i Ansys HFSS. Bandbredderom 63 % för Design-1, samt 57 % för Design-2, erhölls. Trots den första designensstörre bandbredd uppvisar Design-2 bättre strålningsegenskaper, främst avseendeantennens strålningsmönster. De simulerade antennerna har också visat sig hastörre bandbredd jämfört med en redan existerande kompakt, inbäddad DRA. Sett tillstrålningsegenskaper är prestandan hos Design-2 jämförbar med referensantennen,medan design ett uppvisar sämre prestanda.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Stereolitografie"

1

Jendrzejewski, Rafał. Badania doświadczalne laserowego przetapiania proszków metali dla potrzeb stereolitografii. Gdańsk: Wydawn. IMP PAN, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dzionk, Stefan. Modelowanie i analiza nierówności powierzchni elementów wykonywanych metodą stereolitografii. Gdańsk: Wydawnictwo Politechniki Gdańskiej, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography