Log in

Relevant bibliographies by topics / STM32F417 / Dissertations / Theses

To see the other types of publications on this topic, follow the link: STM32F417.

Dissertations / Theses on the topic 'STM32F417'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 26 dissertations / theses for your research on the topic 'STM32F417.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Volek, Lukáš. "Vývojová deska s ARM Cortex M4." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220344.

Full text

Abstract:

In this work I aimed at designing a universal system for testing either STM32F407/417 by STMicroelectronics and later various sensors and communication buses. The result then is a main board with many specific connectors for individual buses even with connectors making all I/O pins accessible at the same time. Thanks to advanced switching regulators the power supply is capable of accepting a wide range of sources like single Li-Ion cell, pair of alkaline cells, 12V Lead battery, common wall power adapters (both DC and AC up to 15 Vpp ), USB, laboratory power supplies with multiple outputs and

APA, Harvard, Vancouver, ISO, and other styles

2

Mišík, Štefan. "Meteostanice s rozhraním Ethernet." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Novotný, Jan. "Zpracování signálu UHF RFID čtečky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221225.

Full text

Abstract:

The master’s thesis is focused on the UHF RFID reader EXIN-1 signal processing. The first part describes the concept of the EXIN-1 front end, its basic testing and possible communication interfaces for reader control and for receiving and transmitting baseband signals. The second part of this work is aimed to a simple description of EPCglobal Class-1 Generation-2 UHF RFID Protocol, especially to used modulations and codings. In the last part, a block connection between the front end and an ARM Cortex-M4 microcontroller discovery board is designed. The microcontroller is used for generating of

APA, Harvard, Vancouver, ISO, and other styles

4

Laník, Jakub. "Systém pro monitorování a nastavení signálového procesoru v digitálním reproduktorovém systému." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220277.

Full text

Abstract:

This project solves teoretical design of digital reproductor system and controlling GUI software. This digital system is composed of one master unit, which digitalize different audio sources and stream them by ethernet to slave units. The controlling software is be able to set and monitor the audio system.

APA, Harvard, Vancouver, ISO, and other styles

5

Faltičko, Martin. "Návrh řídicího software pro RC soupravu." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236605.

Full text

Abstract:

This document deals with the control software for professional Model-radio transmitter. The aim of the thesis is to design a functional solution that would satisfy the requirements of existing aircraft modelers (and others), thus to compete against other manufacturers of radio sets. In the following pages there is presented the design and implementation of user interface with regard to functionality and clarity, then the basic algorithms for driving aircraft models are explored. As a result of those findings the control software is implemented for an embedded device using the supplied hardware

APA, Harvard, Vancouver, ISO, and other styles

6

Skalický, Jakub. "Vzdálené ladění procesorů ARM za použití průmyslové sběrnice." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240845.

Full text

Abstract:

This semestral thesis is concerned on facilities of using DebugMonitor exception for debugging software which run on ARM Cortex-M4. The comunnication between debugged software and debugging master is implemented via CAN bus. The result is support for debugging without special debugging equipment. For support of this type of debug this thesis implemented code library called SDebug. It's managing parts of Cortex-M4 core, which are userd for debug.

APA, Harvard, Vancouver, ISO, and other styles

7

Harsa, Jan. "Digitizér audiosignálu se záznamem na SD kartu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220252.

Full text

Abstract:

This thesis deals about a digitizer design. The digitizer is part of air-band monitoring receiver. Requirement is digitalization of two audio signals. The device communicates with PC through USB interface and it provides reading and writing to SD card. The STM32F4DISCOVERY development board with processor STM32F407VGT6 was used for design and function testing. This development kit is supplemented with other peripherals on an extern board (input audio circuits and SD slots). The thesis describes briefly theory for each issue which this project deals with. One part is engaged to the hardware des

APA, Harvard, Vancouver, ISO, and other styles

8

Šutera, Libor. "Převodník USB joysticku na ethernetové rozhraní pro řízení robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219657.

Full text

Abstract:

This thesis describes the design of construction of the converter USB joystick on the Ethernet interface. In the first part are theoretically analyzed both protocols used for the converter. An analysis of current microprocessor trade and their possible using for application in this project. Next part including the specification of used microprocessor and all options of programming and debugging of the microprocessor. Another part deals with the detailed design of the hardware interface. The last part describes the software equipment of microprocessor and the final appreaciation of work.

APA, Harvard, Vancouver, ISO, and other styles

9

Řeháček, Tomáš. "Univerzální modul s připojením na ethernet." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221264.

Full text

Abstract:

This master’s thesis deals with creating a universal module with Ethernet interface and its using for digital values measurement. The main module components are gate array FPGA, microprocessor, PHY chip and RJ45 connector. Printed circuit board is in this thesis designed in Eagle. The chase for board is drawn in SketchUp and printed on a 3D printer. There is a code implemented in created universal module that is performing the function of logic analyzer. Data measured by the analyzer are sent to the Ethernet using UDP/IPv4 protocol. The last part is creating an application in C# to display the

APA, Harvard, Vancouver, ISO, and other styles

10

Vít, Tomáš. "Řízený laboratorní zdroj." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-221134.

Full text

Abstract:

The aim of my master’s thesis is the design and implementation of laboratory power supply with output parameters 0-25V and 0-2A and options to manage this resource by elements of the front panel or via a computer control program. Content is the theoretical analysis of the possibility of subsequent theoretical sources suggesting that it verified on the prototype laboratory resources.

APA, Harvard, Vancouver, ISO, and other styles

11

Moštěk, Jiří. "Malý CNC stroj." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220350.

Full text

Abstract:

This diploma thesis deals with the design and construction of a three-axis CNC machine primarily designed for PCB drilling and production of front panels for various electronic devices. All three axes are driven by stepper motors NEMA 23 which are connected to stepper motor drivers L6470. Processor STM32F407 is used to control the whole machine. The wiring is completed by a LCD display with touchscreen which is used to communicate with user. Data for drilling can be entering manually or via USB inerface. Part of this thesis is the selection of a suitable construction and components, assembling

APA, Harvard, Vancouver, ISO, and other styles

12

Ha, Tuan. "Detektor pozice laserového svazku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413007.

Full text

Abstract:

This thesis deals with design of a laser position detector. Different types of sensor are mentioned and compared at the beginning. Special attention is paid to quadrant sensor. Its pros and cons are discussed with designing methods. The sensor is simulated in Matlab to test its output response. Then the laboratory tests follow to meassure real response of the chip. Then follows the design of the detector based on measured and simulated data. In the conclusion of this thesis parameters of created device are evaluated.

APA, Harvard, Vancouver, ISO, and other styles

13

Vélim, Jan. "Lokalizace zvukového zdroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219971.

Full text

Abstract:

The paper discusses a possibility of localization of a sound source inside a wooden beam. The method is based on measuring signals from two microphones, assuming the sound source lies between the microphones. The position of the sound source is calculated from the delay between the signals. The calculation of the delay is done by correlation of the signals in the frequency range. ARM architecture microcontroller is used to for the calculations.

APA, Harvard, Vancouver, ISO, and other styles

14

Stupka, Dominik. "Softwarově definovaná domácí automatizace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241056.

Full text

Abstract:

This thesis is about development and construction of systems for building automation. At the beginning it´s focused on usage of building automation. Short describe used topology of installation and available systems on the market. The second chapter is about designing of hardware’s elements systems. Then it’s describing control unit Raspberry Pi 3, microprocessors for communication and slave modules. For my thesis I am also engaged in interface communication and designing of I/O systems. The third and fourth chapter is describing software equipment’s of the system. The parts of microprocessor

APA, Harvard, Vancouver, ISO, and other styles

15

Matěj, Aleš. "Hluboké neuronové sítě: implementace pro vestavěné systémy." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2018. http://www.nusl.cz/ntk/nusl-385971.

Full text

Abstract:

The goal of this thesis is to firstly design and implement an application for embeddedsystems which will classify MNIST numbers and secondly optimize energy and memoryrequirements of this network. The basics of neural networks, Cortex-M processor cores andembedded devices are described in the theoretical part. Followed by implementation details.Networks learning is done with Python and Theano library on a PC. The network is thenconverted to C for a board STM32F429 Discovery. Last part consist of network optimization,which focuses on convolution, dot product and number representation of weights

APA, Harvard, Vancouver, ISO, and other styles

16

Kotouček, Filip. "Vícekanálový přenos zvukových signálů po lokální počítačové síti." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316879.

Full text

Abstract:

This thesis deals with design and implementation of multi-channel audio signal streaming via local network. The aim was to choose suitable processor for the transmission of up to 32 channels of audio signal, which will be used for implementation. Also the low-latency ASIO driver was studied and was used to provide timestamps for synchronization. The transmission protocol was designed for signaling and for the real time stream. The actual transmission is provided by TCP protocol. In conclusion, I created the application for development board with choosen MCU. Finally whole solution was tested w

APA, Harvard, Vancouver, ISO, and other styles

17

Nedoma, Jakub. "Aktivní reproduktor s digitálním vstupem zvukového signálu a s přídavnými funkcemi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219991.

Full text

Abstract:

The aim of the diploma thesis was to design active loudspeakers. The project contains the final solution of the designed loudspeakers that have a digital input of the multichannel audio signal with both sided data communication. In the work, there are also created circuits for processing an audio signal with a following amplification for the loudspeakers. Added functions are an infra acceptor for a remote control and binary outputs for assistant functions - a control of the motor and an indication via LED diodes.

APA, Harvard, Vancouver, ISO, and other styles

18

Mosconi, Enrico. "Sviluppo di una piattaforma per il monitoraggio remoto di dispensatori di bevande." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017.

Find full text

Abstract:

La tesi ha come obiettivo principale lo sviluppo hardware e software di una piattaforma di monitoraggio per dispensatori di bevande. Questo tipo di progetto si colloca nel mondo dei dispositivi IoT che sono caratterizzati dalla presenza di connessione internet e dall'ingente scambio di dati. Nell'elaborato sono descritti i passi progettuali in maniera dettagliata che mi hanno condotto alla realizzazione di due differenti prototipi: il primo, utile per validare i sistemi di acquisizione e di invio dati; il secondo, sviluppato con lo scopo di eliminare le schede di sviluppo utilizzate nella pr

APA, Harvard, Vancouver, ISO, and other styles

19

Závodný, Vilém. "Vzdáleně řízený termostat." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220640.

Full text

Abstract:

The aim of my thesis is to understand the manufactured thermostats and design own thermostat to allow the most basic possibilities classical thermostats plus setup and management via web interface. It is a realization of a small web server that works closely with hardware peripherals. In addition, the web interface is still possible to manage a Web server of TFT LCD screen or applications for smart phone with Android. In addition, the thermostat allows the temperature reading from the BLE modules. All temperatures are continuously stored in a database and graphically processed.

APA, Harvard, Vancouver, ISO, and other styles

20

Kalivoda, Jakub. "Adaptivní řízení varny malého pivovaru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220959.

Full text

Abstract:

This final thesis deals with adaptive control of small brewery. Contains a short description of brewing technology and adaptive control. Includes design of small brawery and control system based on STM32F407 Cortex-M4 microcontroller. For online identification is used Recursive Least Squares Method. The controller function perform a modified PSD controller with filtered derivative component, reducing the first overshot and dynamic antiwindup. The proposed adaptive controller is implemented into microcontroller. Created device i used for semi-automatic beer production.

APA, Harvard, Vancouver, ISO, and other styles

21

Stejskal, Tomáš. "Hlukoměr pro embedded systémy." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-220380.

Full text

Abstract:

The aim of this work is the design and implementation of a sound level meter for emdedded systems. It is designed sound level meter sensor. This sensor includes a microphone, microphone preamplifier and ADC. This sensor is connected to a development kit STM32F4 Discovery, where sound is processed. It is processed filtration, time weighting, calculation of sound leve and loudness weighting. The sound level is then sent via the serial communication USART. This thesis includes a theoretical analysis of noise and its human perceptions. It also describes the development platform used.

APA, Harvard, Vancouver, ISO, and other styles

22

Ševčík, Martin. "Modelování a implementace řídicího algoritmu 3D tiskárny." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-403747.

Full text

Abstract:

The content of the thesis is the modeling and implementation of the CNC control algorithm. This master thesis contains the description of issues of computer-controlled machines, the research of interpolation algorithms for control CNC machines and the modeling of the selected control algorithm with motor S-curve shaped speed profiles and simulation of chosen algorithms with S-shaped speed profiles in Matlab & Simulink.

APA, Harvard, Vancouver, ISO, and other styles

23

Orávik, Tomáš. "Datalogger s rozhraním Ethernet." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-221127.

Full text

Abstract:

Thesis deals with Datalogger with Ethernet interface controlled by DISCOVERY Kit STM32F429. Datalogger is equipped with eight digital inputs and three analogue inputs. The measured data are saved on the SD card. The Ethernet interface module is designed using LAN8720A from Microchip.

APA, Harvard, Vancouver, ISO, and other styles

24

Chen, Bo-Jia, and 陳柏嘉. "An ECG Signal Processing and Heart Rate Estimation System Implemented by the STM32F429 Processor." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/hrtxq9.

Full text

Abstract:

碩士<br>龍華科技大學<br>電子工程系碩士班<br>106<br>In this thesis, an ECG signal processing system for removing baseline wander 、 electromyography (EMG) interference and heart rate estimation has been implemented via the STM32F429ZI chip which is ARM series chips of STMicroelectronics produced. The ARM processor has operation frequency of up to 180MHz, flash memory size of 2M bytes, SRAM size of 256+4K bytes and is suitable for a large amount of data calculation as well as peripheral interface control. In this work, the sampling rate of ECG is designed as ECG sampling rate is 250 S/sec, data processing takes

APA, Harvard, Vancouver, ISO, and other styles

25

Martins, Bruno Filipe Conceição. "Sistema de Controlo de Tração em Tensão/Binário para Robôs Móveis." Master's thesis, 2015. http://hdl.handle.net/10316/40396.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Brandão, Ivo Micael Couceiro. "Dispositivo eletrónico para aquisição e processamento de múltiplos sinais fisiológicos e ambientais." Master's thesis, 2015. http://hdl.handle.net/10400.26/15460.

Full text

Abstract:

Os sistemas de saúde atuais estão estruturados e otimizados para reagir a crises e para a gestão de doenças, no entanto enfrentam atualmente um novo desafio, a crescente população idosa (Carrilho, 2015). Este facto sugere que a prestação de cuidados de saúde requer uma mudança significativa na direção de soluções mais flexíveis e adaptáveis às necessidades emergentes. A reestruturação dos sistemas de cuidados de saúde poderá permitir, uma mudança de foco para uma gestão mais pró-ativa do bem-estar, em vez da gestão da doença. Deste modo, poderá ser possível a intervenção de profissionais

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!