Log in

Relevant bibliographies by topics / Straightening schemes / Journal articles

To see the other types of publications on this topic, follow the link: Straightening schemes.

Journal articles on the topic 'Straightening schemes'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 35 journal articles for your research on the topic 'Straightening schemes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Guan, Ben, Yong Zang, Yuan Wang, Sha Feng, and Xiao Chan Liu. "The Influence of Process Scheme on the Straightening Effect of Section Steel." Advanced Materials Research 572 (October 2012): 302–7. http://dx.doi.org/10.4028/www.scientific.net/amr.572.302.

Full text

Abstract:

By studying the geometrical features and the mechanical characters of the profiles during the roller leveling process and combining the basic elastic-plastic theories, a mechanical model is established which is suitable for analyzing elastic-plastic bending of the profile during roller leveling process. Using this model, the straightening effects have been analyzed under different roller leveling process schemes for the profiles which have typical initial curvatures. The analysis of roller leveling process confirms that the curvature ranges of the profiles can't converged infinitely under any

APA, Harvard, Vancouver, ISO, and other styles

2

Tamila, V. A., I. I. Vegera, V. V. Liaukovich, and A. V. Vetoshkin. "Technology and equipment of roll straightening of sheet metal." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 4 (January 20, 2023): 70–78. http://dx.doi.org/10.21122/1683-6065-2022-4-70-78.

Full text

Abstract:

The features of the editing technology, possible defects of sheet metal and piece blanks of complex configuration are presented. The main schemes and designs of sheet‑straightening machines are considered, as well as the main directions of improvement of LSM designs and editing technologies are highlighted. The analysis of the process of roll straightening is presented taking into account the phenomena occurring in a metal undergoing alternating loading with decreasing amplitude (interaction of elastic and plastic deformation, Bauschinger effect, etc.). The parabolic dependence of the residual

APA, Harvard, Vancouver, ISO, and other styles

3

S., S. ZDANEVICH, P. POGREBNYAK R., and V. ZDANEVICH S. "STRUCTURAL ANALYSIS AND RATIONAL DESIGN OF MECHANISMS OF CROSS-ROLL TUBE STRAIGHTENING MACHINES." Science and Transport Progress, no. 5(77) (November 19, 2018): 65–73. https://doi.org/10.15802/stp2018/147630.

Full text

Abstract:

<strong>Purpose.</strong> The article is aimed to perform a structural analysis of the main and auxiliary mechanisms of tube straightening machines, to identify structural and local redundant links in the mechanism schemes, and to offer recommendations on their rational design. <strong>Methodology.</strong> The solution is realized by means of the theory of mechanisms and machines using structural analysis of the mechanisms of tube straightening machines based on the universal structural theory of O.G. Ozol. <strong>Findings.</strong> The extended principle of the mach

APA, Harvard, Vancouver, ISO, and other styles

4

Shui, Lang, and Jianhui Fu. "An investigation on as-cast microstructure and homogenization of nickel base superalloy René 65." High Temperature Materials and Processes 41, no. 1 (2022): 555–67. http://dx.doi.org/10.1515/htmp-2022-0245.

Full text

Abstract:

Abstract Nickel base superalloy René 65 is a cast-wrought derivative of René 88DT. Lower cost and comparable physical properties allow René 65 to serve as a promising candidate material for turbine disks in next-generation aeroengines. The cast-wrought route leads to significant segregation of solute elements during solidification of René 65, which should be reduced by a proper homogenization scheme. We use René 65 samples from a Ø 450 mm electros-slag remelting ingot (sample Disk I) and a Ø 250 mm pilot vacuum arc remelting ingot (sample Disk II) to investigate as-cast microstructure and homo

APA, Harvard, Vancouver, ISO, and other styles

5

Shustov, O., A. Adamchuk, P. Kravchenko, V. Symonenko, and A. Shustova. "Improvement of technological solutions for reclamation of Morozivskyi lignite open pit mine." Collection of Research Papers of the National Mining University 79 (December 30, 2024): 121–32. https://doi.org/10.33271/crpnmu/79.121.

Full text

Abstract:

Purpose. Substantiation of the parameters of mining reclamation of the sides of the split and howling trenches of the flooded Morozivskyi lignite open pit mine. Methods. In solving the problems of the study, methods of analytical analysis, graph analytics, engineering calculations, statistical processing, and comparative analysis of data to improve the technological schemes of mining and technical reclamation of the sides of the mine workings of the flooded Morozivskyi lignite open pit mine were used. Findings. The main stages of land restoration are defined, which are as follows: alignment of

APA, Harvard, Vancouver, ISO, and other styles

6

Xia, Liang Yu, Dong Ming Sun, Gui Rong Kang, and Jian Sun. "The Straightening Scheme Analysis for the Copper-Clad Steel Tube." Advanced Materials Research 887-888 (February 2014): 1223–26. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.1223.

Full text

Abstract:

In this paper, we studied the large deformation and the small deformation method based on the research of the existing system of straightening theory and considered the characteristics of copper-clad steel to find a proper straightening scheme for this new composite materials. the advantages and disadvantages of the method are also compared. the straightening scheme for straightening effect and parameters is a decisive role before all kinds of straightening parameter determination. But at present, there isnt a equipment for the straightening of this new material.

APA, Harvard, Vancouver, ISO, and other styles

7

Dvorkin, E. N., and F. M. Medina. "Finite Element Models for Analyzing the Straightening of Steel Seamless Tubes." Journal of Engineering for Industry 111, no. 4 (1989): 351–55. http://dx.doi.org/10.1115/1.3188771.

Full text

Abstract:

An important part of the steel seamless tubes production scheme is the straightening process. Finite element models are developed to analyze the straightening process and to evaluate its effect on the final external collapse pressure of the tubes.

APA, Harvard, Vancouver, ISO, and other styles

8

Han, Xue Yan, Kang Liu, and He Rong Jin. "Design of High Precision Online Sizing Cutter for PC Steel Bars." Advanced Materials Research 746 (August 2013): 520–23. http://dx.doi.org/10.4028/www.scientific.net/amr.746.520.

Full text

Abstract:

Along with the development of high-rise buildings and high-speed railways, the straightness and sizing accuracy of PC steel bars is highly demanded. The addition of precision straightening process between traction and shear in the production line of PC steel bars can improve the application performance of products effectively. Moreover, the traditional shear mode is changed to realize high precision sizing and cutting purpose in high-speed production (90m/min). A straightening scheme with large deformation and equal curvature was proposed in this article, which can realize circumferential stan

APA, Harvard, Vancouver, ISO, and other styles

9

Gupalov, B. A. "Improving the Quality of Manufacturing of Locomotive Body Frames." Vestnik IzhGTU imeni M.T. Kalashnikova 25, no. 1 (2022): 62–76. http://dx.doi.org/10.22213/2413-1172-2022-1-62-76.

Full text

Abstract:

The paper describes the process of manufacturing the frame of locomotive bodies, which is a complex step-by-step process of assembling (welding) elements. It has been established that internal stresses cause welding deformations, while the deviation from the straightness of the sidewalls of the electric locomotives body frames of 2ES6, 2ES10, 2ES7 series (manufactured by Ural Locomotives LLC) can reach up to 25 mm with a tolerance of 5 mm. The results of internal stress analysis for linear displacements of 25 mm sidewalls showed that the maximum stress values can reach up to 45 MPa. To improve

APA, Harvard, Vancouver, ISO, and other styles

10

Mróz, Sebastian, Piotr Szota, Tomasz Garstka, Grzegorz Stradomski, Jakub Gróbarczyk, and Radosław Gryczkowski. "The Selection of Leveler Parameters Using FEM Simulation." Materials 17, no. 1 (2023): 52. http://dx.doi.org/10.3390/ma17010052.

Full text

Abstract:

The aim of this research was to select parameters for the roll pre-leveler to provide sheet metal waviness reduction after unwinding from the coil. Straightening parameters were selected based on the results of numerical simulations with the use of an FEM-based computer program. The material used for research was a hot-rolled sheet metal of grade S235JR + AR with a thickness of 3 mm and width of 1500 mm after unwinding from the coil. A mathematical model was developed to determine straightening roll arrangements in the pre-leveler. It enabled roll arrangement selection and a straightening sche

APA, Harvard, Vancouver, ISO, and other styles

11

Mylnikov, V. V. "Influence of Loading Frequency on Fatigue of Construction Materials." Science & Technique 18, no. 5 (2019): 427–35. http://dx.doi.org/10.21122/2227-1031-2019-18-5-427-435.

Full text

Abstract:

Investigations have been carried out in respect of structural steel and titanium alloy fatigue at various cyclic loading frequencies and these investigations have made it possible to reveal regularities in changes of parameters pertaining to fatigue resistance and stability behaviour of the tested materials. A change in cyclic loading frequency affects duration of a single (during one cycle) stay of the material in the loaded state and it has an impact on its durability. In addition, with an increase in frequency of load cycles, deformation rate becomes higher, and stress build-up time is decr

APA, Harvard, Vancouver, ISO, and other styles

12

Shramenko, Volodymyr, Nataliia Bielikova, Olexandr Ovchinnikov, Dmytro Onopreichuk, and Stanislav Horielyshev. "Formation of the stress-strain state of rail bars during welding with preliminary vertical bending." MATEC Web of Conferences 230 (2018): 01015. http://dx.doi.org/10.1051/matecconf/201823001015.

Full text

Abstract:

The article defines the parameters and working conditions for the final restoration of the integrity of the rail beams of a continuous gauge rail by electrocontact welding, as well as when welding rails with each other when they are elongated in the field by the method of preliminary bending. This involves the process of welding rails at temperatures above the temperature of their fixation. In this connection, an appropriate calculation scheme has been considered in relation to which the necessary parameters have been determined to ensure the conditions for straightening the residual curvature

APA, Harvard, Vancouver, ISO, and other styles

13

Antimonov, Aleksey, and Nadezhda Pushkareva. "Fuel Pipes Coil Drawing Line Production for Diesel Engines." Materials Science Forum 946 (February 2019): 739–43. http://dx.doi.org/10.4028/www.scientific.net/msf.946.739.

Full text

Abstract:

The technology and equipment for diesel engines steel fuel pipes cold rolling and coil drawing production on a self-aligning mandrel are considered. We presented current production line scheme for the pipes production, which includes pipe-rolling drum mills, radial forging machines, thermal furnaces with a protective atmosphere, finishing lines for unwinding coils and straightening pipes, a system of conveyors and stores for transferring coils from one unit to another. A list of articles and patents containing basic information on this topic is attached.

APA, Harvard, Vancouver, ISO, and other styles

14

Qin, Dong-ze, Wei Zhang, Shu-Yun Zhang, Tian-Ji Guo, Shui-Yuan Pei, and Jin-Shi Zhang. "Study on Mechanical Properties of Submunition’s Ribbon Straightening Section." International Journal of Aerospace Engineering 2020 (January 20, 2020): 1–17. http://dx.doi.org/10.1155/2020/1327848.

Full text

Abstract:

The humanitarian damage caused by the unexploded submunitions is one of the hot issues of concern to the international community at present. A portion of the submunition that did not explode was caused by a break at the connection between the ribbon riveting and the fuze. According to the physical structure of the submunition and the trajectory into which it was ejected, we analyzed the forces of the submunition in flight, deduced the related mathematical models, and clarify the key elements of the mechanics. In this paper, the commercial simulation software was used to calculate the mechanica

APA, Harvard, Vancouver, ISO, and other styles

15

Yang, Jingbo, Fujun Zhang, Jingshe Li, et al. "Bending and Straightening of a Medium Carbon Steel Continuous Casting Slab with Low Temperature End Plastic Groove." Materials 15, no. 7 (2022): 2609. http://dx.doi.org/10.3390/ma15072609.

Full text

Abstract:

The high temperature brittleness range of medium carbon microalloyed steel under an actual continuous casting process was determined by the high temperature tensile test. The test results revealed that only a third of the brittle temperature range from 650–825 °C was due to intergranular ferrite in the experimental steel. In addition, it was found that the plastic recovery was fast and stable when the temperature was lower than 725 °C (the lowest plastic temperature). Bending/straightening operation in this temperature range was conducive to controlling the generation of corner cracks. In orde

APA, Harvard, Vancouver, ISO, and other styles

16

Vyazankin, Vitaliy Valer'evich, Victor Andreevich Mamontov, Sergey Vladimirovich Vinogradov, and Semen Vital'evich Vyazankin. "Calculation and design of the heating furnace for straightening experimental samples of ship shafts." Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies 2023, no. 4 (2023): 35–39. http://dx.doi.org/10.24143/2073-1574-2023-4-35-39.

Full text

Abstract:

During operation the shafts of responsible purpose, which have received a curvature of the longitudinal axis and are not allowed for further operation, are subjected to correction with heating. The following heating methods are considered: with the use of a gas burner, induction heating, as well as tubular resistance furnaces. The use of a gas burner causes difficulties in the heating process controlling and the appearance of defects due to uneven heating afterwards. The diagram of the device for heating the shaft with a gas burner is illustrated. The scheme of induction heating of the shaft s

APA, Harvard, Vancouver, ISO, and other styles

17

Vyazankin, Vitaliy Valer'evich, Victor Andreevich Mamontov, and Konstantin Sakhno. "Method of cyclic testing of sample-models of the crankshaft of a marine internal combustion engine for bending with torsion." Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies 2024, no. 1 (2024): 32–37. http://dx.doi.org/10.24143/2073-1574-2024-1-32-37.

Full text

Abstract:

It is proposed to consider the bending fatigue strength of the crankshaft as the main criterion of its operability during operation. It is noted that thermomechanical straightening with heating by stress relaxation method is most acceptable for straightening critical shafts that have received a curvature of the longitudinal axis during operation. Bending fatigue tests of round samples with a diameter of 20 mm in a dangerous section were carried out to substantiate the correction technology, test modes and evaluate the results of the correction. It was found that an increase in diameter leads t

APA, Harvard, Vancouver, ISO, and other styles

18

Saveliev, М. V., А. V. Chiglintsev, D. V. Sushnikov, P. V. Ekkert, and V. Yu Elin. "Development of steel continuous casting at the Nizhny Tagil steel-works." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 76, no. 6 (2020): 550–55. http://dx.doi.org/10.32339/0135-5910-2020-6-550-555.

Full text

Abstract:

Steel continuous casting is one of fundamentals of modern steel industry. Specialists of Nizhny Tagil steel-works (NTMK) made an important contribution to the process perfection. The one-strand slab CCM of curvilinear type with radial mold and slab straightening by multipoint curve, designed and manufactured at Uralmashzavod, became a prototype for many machines, which were later manufactured at domestic and foreign steel-works in the end of 60th of the previous century. In the process of mastering of CCMs, which were put into operation within the programs of the plant modernization and transf

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Yujin, Bin Yang, Dexu Wang, and Xinze Wang. "Enhancement of CFD-based external gas straightener optimization for pipe bending." Journal of Physics: Conference Series 2996, no. 1 (2025): 012003. https://doi.org/10.1088/1742-6596/2996/1/012003.

Full text

Abstract:

Abstract In this study, an optimisation strategy for an external gas straightener is proposed to address the lack of measurement accuracy of ultrasonic flowmeters under complex flow field conditions in the natural gas market. In view of the space limitation of the built-in straightener, a computational fluid dynamics (CFD) approach, combined with theoretical analysis and experimental validation, was used to monitor the performance of the flowmeter in detail under minimum and maximum flow conditions. On this basis, an external gas straightening device applicable to the bends at the front end of

APA, Harvard, Vancouver, ISO, and other styles

20

Morozov, Yury A. "Force parameters of metal deformation during sheet drawing." Structural Mechanics of Engineering Constructions and Buildings 16, no. 6 (2020): 493–503. http://dx.doi.org/10.22363/1815-5235-2020-16-6-493-503.

Full text

Abstract:

The aim of the work. The effect of the curvature of the rounding of torus surfaces during the formation of a cylindrical product (glass) is investigated, taking into account the plastic thinning of the deformable material at the end edges of the matrix and pressing punch. Methods. The existing scheme for determining the power parameters of sheet drawing is analyzed, based on the assumption of the implementation of some abstract stress state in the material; mainly conditional tensile strength. At the same time, the possibility of forming the product without destruction determines the obvious o

APA, Harvard, Vancouver, ISO, and other styles

21

Hrechanyi, Oleksii, Tatiana Vasilchenko, Andrii Vlasov, Eduard Huz, and Daria Tsimakhovych. "Influence of technological process parameters on equipment dynamic factor." System technologies 3, no. 134 (2021): 3–12. http://dx.doi.org/10.34185/1562-9945-3-134-2021-01.

Full text

Abstract:

Technological equipment of the metallurgical industry operates in difficult conditions in terms of dynamic loads. On the other hand, special requirements are imposed on their mechanisms - they must be reliable in operation and allow easy regulation, and in the event of breakdowns, allow quick replacement or repair of units and parts, and at the same time must meet the conditions for the accuracy of reproduction of the given technological opera-tions.In modern rolling shops, technological operations are carried out according to the continuous and continuous principles of creating new rolling eq

APA, Harvard, Vancouver, ISO, and other styles

22

Ham, Young-dae. "Gyeonghak of Hoebong Ha Gyeom-jin: Focusing on Analysis of Refutation for Each Category on Noneojuseo of Kang Yu-wi." Daedong Hanmun Association 73 (December 30, 2022): 211–37. http://dx.doi.org/10.21794/ddhm.2022.73.211.

Full text

Abstract:

Hoebong Ha Gyeom-jin (1870~1946), the author of 『Dongyuhakan』 that outlined the traditional academics in a type of study scheme, a descriptive method of traditional academic history of Asia studied under the tutelage of Myeonwoo Gwak Jong-seok (1846~1919) to succeed the academic line of Janju Academic Faction. This article is a review of the Gyeonghak (Chinese Classics) perspective with the focus around the analysis of ｢Kang Yu-wi Noneojuseojobyeon｣ that was written in 1934 when he was 65 years of age. 『Noneoju (Annotation of the Analects of Confucius)』 of Kang Yu-wi, the subject of crit

APA, Harvard, Vancouver, ISO, and other styles

23

Garcke, Harald, and Robert Nürnberg. "Numerical approximation of boundary value problems for curvature flow and elastic flow in Riemannian manifolds." Numerische Mathematik, September 20, 2021. http://dx.doi.org/10.1007/s00211-021-01231-6.

Full text

Abstract:

AbstractWe present variational approximations of boundary value problems for curvature flow (curve shortening flow) and elastic flow (curve straightening flow) in two-dimensional Riemannian manifolds that are conformally flat. For the evolving open curves we propose natural boundary conditions that respect the appropriate gradient flow structure. Based on suitable weak formulations we introduce finite element approximations using piecewise linear elements. For some of the schemes a stability result can be shown. The derived schemes can be employed in very different contexts. For example, we ap

APA, Harvard, Vancouver, ISO, and other styles

24

Wang, Rong-Jun, Qi Zhou, Xiao-Zhong Du, et al. "Crack mechanism and experimental verification on straightening of AZ31B magnesium alloy plate." Scientific Reports 13, no. 1 (2023). http://dx.doi.org/10.1038/s41598-023-36396-7.

Full text

Abstract:

AbstractWhen plates with edge cracks in the rolling process is straightened by cyclic tensile and compressive stress, the tip of edge crack always accompanied by stress concentration, which leads to crack propagation. In this paper, damage parameters are imported into the plate straightening model based on determining the GTN damage parameters of magnesium alloy materials by inverse finite element calibration method, the influence of different straightening process schemes and prefabricated V-shaped crack geometry on crack growth is analyzed through the way of the combination of simulation and

APA, Harvard, Vancouver, ISO, and other styles

25

Li, Jie, and Xianming Zhao. "Study on the control of post-roll bending deformation and residual stress in hot-rolled L-beam based on rapid cooling." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, August 2, 2024. http://dx.doi.org/10.1177/14644207241269622.

Full text

Abstract:

The bending deformation problem and internal residual stress of hot-rolled L-beams affect the quality and subsequent use performance of L-beams. In this paper, the computational model of the L-beam air-cooling process is established by using ABAQUS finite element software, which reveals the reasons for three times deformation of the L-beam from the perspectives of phase change expansion and metal cooling contraction. In order to control the deformation and residual stress of the L-beam, four experimental schemes were determined with the cooling method, water pressure, and the opening and closi

APA, Harvard, Vancouver, ISO, and other styles

26

Huang, Xueying, and JinPing Gu. "A theoretical model for roller-shape design of three-roller continuous and synchronous calibration process of ovality and straightness for large thin-walled pipes." Scientific Reports 14, no. 1 (2024). http://dx.doi.org/10.1038/s41598-024-57753-0.

Full text

Abstract:

AbstractLarge thin-walled pipes are particularly suitable for oil and gas transport and auxiliary pipes in cold areas or deep sea-beds. At present, the rounding and straightening processes are completed independently, and the theoretical model for roller-shape design is analyzed only in a single direction. To solve this problem, a theoretical model for roller-shape design of three-roller continuous and synchronous adjusting straightness and ovality process for large thin-walled pipes is established. The established model is verified by numerical simulation and experimental research using 304 s

APA, Harvard, Vancouver, ISO, and other styles

27

Arhat, Roman, Serhiy Shlyk, Viktor Shchetynin, D. Moloshtan, Volodymyr Drahobetskyi, and Oleksandr Shapoval. "Layered shock-resistant element parts shape change process selection and modeling." International Scientific and Technical conference "The Progressive Technics, Technology and Engineering Education", no. XXII (September 21, 2021). http://dx.doi.org/10.20535/2409-7160.2021.xxii.239018.

Full text

Abstract:

An impact-resistant layered element consisting of two outer layers from highly rigid material and an inner layer from viscoelastic material has been developed. The item reduces the barring effect on the protected object. The design peculiarity is that the outer part has a bend with a deflection arrow within 10… 15 thicknesses, and has a connection of the outer layers from high-stiff material on opposite edges with staples from plastic material, which during plastic deformation flows into the edge holes coaxially in the outer layers, on the inner side of the impact-resistant element is attached

APA, Harvard, Vancouver, ISO, and other styles

28

"Regularities of Changes in Kearns Texture Coefficient at Cold Rolling of Zr-2.5%Nb Alloy." East European Journal of Physics, no. 2 (2019). http://dx.doi.org/10.26565/2312-4334-2019-2-06.

Full text

Abstract:

-ray studies of the changes in characteristics of crystallographic texture with cold deformation of Zr‑2.5%Nb alloy plates by longitudinal and cross rolling up to 56% at the speed of 5…10 sec-1 were carried out. The original plates were made from longitudinal fragments and rings cut from Æ15.0´1.5 mm² tube, and were then annealed at 580 °C. Texture of the plates was studied by the method of inverse pole figures with calculation of the Kearns texture coefficient along the normal to the plate plane. Dependences of the texture coefficient on degrees of deformation of the plates are built. A discr

APA, Harvard, Vancouver, ISO, and other styles

29

Miller, Nick, and David M. Swart. "Straightening Curved Traffic Lanes in Video." Vision Letters 1, no. 1 (2015). http://dx.doi.org/10.15353/vsnl.v1i1.61.

Full text

Abstract:

<p>Video based vehicle sensing from uncalibrated cameras provides<br />useful traffic information to modern Intelligent Transportation Systems<br />(ITS). This requires vehicle tracking and Turning Movement<br />Counts (TMCs). Traffic scenes contain vehicle motion constrained<br />along possibly curved traffic lanes which can be normalized into<br />straight lines. A simple interpolation scheme is presented which<br />projects to image sequences where vehicles always appear to move<br />straight horizontally for simplified vehicle tracking.</p

APA, Harvard, Vancouver, ISO, and other styles

30

Pasynkov, A. A., S. N. Larin, and A. N. Isaeva. "Theoretical substantiation of reverse isothermal extrusion scheme of pipe billet with active friction and drawing of its edge part." Blanking productions in mechanical engineering (press forging, foundry and other productions), 2020, 540–43. http://dx.doi.org/10.36652/1684-1107-2020-18-12-540-543.

Full text

Abstract:

Method consisting in the implementation of the reverse extrusion process of tube billet in isothermal сondition of stamping with active friction is considered. Feature of the method is the simultaneous use of friction forces and pushing of the formed thickened edge part of the workpiece and its further straightening. The force conditions and stress state in the product are estimated. Comparison of this method with the classical extrusion scheme is given.

APA, Harvard, Vancouver, ISO, and other styles

31

Zhou, Wenbin, Xuhui Xia, Zelin Zhang, and Lei Wang. "Association rules mining between service demands and remanufacturing services." Artificial Intelligence for Engineering Design, Analysis and Manufacturing, October 26, 2020, 1–11. http://dx.doi.org/10.1017/s0890060420000396.

Full text

Abstract:

Abstract The potential relationship between service demands and remanufacturing services (RMS) is essential to make the decision of a RMS plan accurately and improve the efficiency and benefit. In the traditional association rule mining methods, a large number of candidate sets affect the mining efficiency, and the results are not easy for customers to understand. Therefore, a mining method based on binary particle swarm optimization ant colony algorithm to discover service demands and remanufacture services association rules is proposed. This method preprocesses the RMS records, converts them

APA, Harvard, Vancouver, ISO, and other styles

32

Berry, Matthew, Sarah Lewin, and Steven Brown. "Correlated expression of the body, face, and voice during character portrayal in actors." Scientific Reports 12, no. 1 (2022). http://dx.doi.org/10.1038/s41598-022-12184-7.

Full text

Abstract:

AbstractActors are required to engage in multimodal modulations of their body, face, and voice in order to create a holistic portrayal of a character during performance. We present here the first trimodal analysis, to our knowledge, of the process of character portrayal in professional actors. The actors portrayed a series of stock characters (e.g., king, bully) that were organized according to a predictive scheme based on the two orthogonal personality dimensions of assertiveness and cooperativeness. We used 3D motion capture technology to analyze the relative expansion/contraction of 6 body

APA, Harvard, Vancouver, ISO, and other styles

33

Strutynski, Clément, Marianne Evrard, Frédéric Désévédavy, et al. "4D Optical fibers based on shape-memory polymers." Nature Communications 14, no. 1 (2023). http://dx.doi.org/10.1038/s41467-023-42355-7.

Full text

Abstract:

AbstractAdaptative objects based on shape-memory materials are expected to significantly impact numerous technological sectors including optics and photonics. In this work, we demonstrate the manufacturing of shape-memory optical fibers from the thermal stretching of additively manufactured preforms. First, we show how standard commercially-available thermoplastics can be used to produce long continuously-structured microfilaments with shape-memory abilities. Shape recovery as well as programmability performances of such elongated objects are assessed. Next, we open the way for light-guiding m

APA, Harvard, Vancouver, ISO, and other styles

34

Hirata, Koichi, and Takeaki Araki. "Formation dynamics of branching structure in the slippery DLCA model." Journal of Chemical Physics 160, no. 23 (2024). http://dx.doi.org/10.1063/5.0197122.

Full text

Abstract:

We numerically investigated the aggregation dynamics and resulting network structures of colloidal gels using the slippery diffusion-limited cluster aggregation (DLCA) model. In this model, bonds are irreversibly formed upon the particle contacts, but the angles among them are not fixed, unlike the conventional DLCA. This allows clusters to be deformed in the process of aggregation. By characterizing the aggregation dynamics and using a reduced network scheme, our simulation revealed two distinct branching structure formation routes depending on the particle volume fraction ϕ. In lower volume

APA, Harvard, Vancouver, ISO, and other styles

35

Shikch, Eugenia V., Anastasiia S. Koliadko, Olga V. Zhukova, Maria S. Konstantinova, and Anastasiia S. Koliadko. "Effect of nutrient support on structural and functional parameters of facial skin." Vestnik dermatologii i venerologii, October 8, 2024. http://dx.doi.org/10.25208/vdv16768.

Full text

Abstract:

Aims: to study the effect of oral administration of biologically active supplement "VITABEAUTY® Hyaluronic Acid + Resveratrol" on structural and functional parameters of facial skin. Materials and methods: a simple blind placebo-controlled cross-over study was conducted in which 40 female patients aged 30 to 45 years with signs of dryness, decreased hydration and elasticity of facial skin, the first signs of aging and wrinkles took part. The observation was carried out for 10 weeks. The dietary supplement and placebo were taken according to the following scheme: during the first 4 weeks of the

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!