Log in

Relevant bibliographies by topics / Strain gauge

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Strain gauge'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Strain gauge.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Strain gauge"

1

Korshunov, V., R. Mudrik, D. Ponomarev, and A. Rodionov. "Approaches to refinement of analytical models for stress-strain state assessments of structures based on the analysis of monitoring system data." Transactions of the Krylov State Research Centre 1, no. 395 (2021): 47–54. http://dx.doi.org/10.24937/2542-2324-2021-1-395-47-54.

Full text

Abstract:

Object and purpose of research. This paper discusses numerical simulation possibilities in terms of stress-strain monitoring for marine engineering structures. This approach can simulate the behavior of strain gauges for both elastic and plastic material behavior. Materials and methods. FEM-based simulation of strain gauge operation process taking into account geometric and physical non-linearity. Main results. Development of refined FE models for sensor installation area of stress-strain monitoring system. Numerical simulation of uniaxial and triaxial strain gauge operation. Time histories of

APA, Harvard, Vancouver, ISO, and other styles

2

Rogacheva, Nelly, Vladimir Sidorov, and Yulia Zheglova. "Piezoelectric Gauge of Small Dynamic Bending Strains." Buildings 14, no. 8 (2024): 2447. http://dx.doi.org/10.3390/buildings14082447.

Full text

Abstract:

This paper is devoted to a new gauge of small dynamic bending deformations of structures. Unlike previously existing strain gauges that measure elongation or compression at a certain point on the surface of a deformable body, the proposed gauge measures the change in curvature at a point on the surface of a deformable body and does not respond to elongation–compression strains. The gauge is a layered bar made of piezoelectric and elastic materials. It functions using the direct piezoelectric effect. In order to competently study the deformed state of a structure at points on a surface, it is n

APA, Harvard, Vancouver, ISO, and other styles

3

Koc, Pino. "On Experimental Determination of Poisson’s Ratio for Rock-like Materials using Digital Image Correlation." Strojniški vestnik - Journal of Mechanical Engineering 70, no. 5-6 (2024): 211–22. http://dx.doi.org/10.5545/sv-jme.2024.966.

Full text

Abstract:

This article compares the two most used strain determination experimental techniques, the strain gauges and the digital image correlation (DIC), which are used here to determine the static Poisson's ratio of rock-like materials under a compressive loading. While the strain gauge technique measures the strains on the small patch of the underlying material on the spot, where the strain gauge is applied, DIC is a novel optical full-field technique that can measure the strains over the entire region of interest of the specimen. The key research question presented in this paper and research signifi

APA, Harvard, Vancouver, ISO, and other styles

4

Gallage, Chaminda, and Chamara Jayalath. "Use of Particle Image Velocimetry (PIV) technique to measure strains in geogrids." E3S Web of Conferences 92 (2019): 12007. http://dx.doi.org/10.1051/e3sconf/20199212007.

Full text

Abstract:

Geosynthetics are widely used in Geotechnical Engineering to reinforce soil/gravel in pavements, retaining wall backfills, and embankments. It is important to measure strains in geogrids in the determination of their strength parameters such as tensile strength and secant stiffness, and in evaluating their performances in geogrid-reinforced structures. Strain gauges are commonly used in measuring strains in geogrids. However, it is important to verify the strains measured by strain gauges as these strains are affected by the data logging device, gauge factors, quality of bonding between grain

APA, Harvard, Vancouver, ISO, and other styles

5

Han, Ji-Hoon, Sung Joon Min, Joon Hyub Kim, and Nam Ki Min. "Reciprocating Arc Silicon Strain Gauges." Sensors 23, no. 3 (2023): 1381. http://dx.doi.org/10.3390/s23031381.

Full text

Abstract:

Currently, silicon-strain-gauge-based diaphragm pressure sensors use four single-gauge chips for high-output sensitivity. However, the four-single-gauge configuration increases the number of glass frit bonds and the number of aluminum wire bonds, reducing the long-term stability, reliability, and yield of the diaphragm pressure sensor. In this study, a new design of general-purpose silicon strain gauges was developed to improve the sensor output voltage while reducing the number of bonds. The new gauges consist grid patterns with a reciprocating arc of silicon piezoresistors on a thin glass ba

APA, Harvard, Vancouver, ISO, and other styles

6

Bednarz, Edward, Christian Dietrich, Brad Hepner, Jay Patel, and Abas Sabouni. "Determining Magnitudes of Forces at Known Locations through a Strain Gauge Force Transducer." Sensors 23, no. 16 (2023): 7017. http://dx.doi.org/10.3390/s23167017.

Full text

Abstract:

A novel strain gauge force transducer was developed to minimize the number of strain gauges needed to determine the magnitudes of loads when the locations are known. This innovative methodology requires only one strain gauge for each force magnitude desired, reducing the complexity and cost associated with traditional approaches. The theory was verified with laboratory experiments. Seven uniaxial strain gauges were attached to the underside of a simply supported, slender, aluminum beam. One or more loads were applied either directly atop strain gauges or in known positions between strain gauge

APA, Harvard, Vancouver, ISO, and other styles

7

Zhao, Yinming, Zhigang Wang, Siyang Tan, et al. "Dependance of Gauge Factor on Micro-Morphology of Sensitive Grids in Resistive Strain Gauges." Micromachines 13, no. 2 (2022): 280. http://dx.doi.org/10.3390/mi13020280.

Full text

Abstract:

The effect of micro-morphology of resistive strain gauges on gauge factor was investigated numerically and experimentally. Based on the observed dimensional parameters of various commercial resistive strain gauges, a modeling method had been proposed to reconstruct the rough sidewall on the sensitive grids. Both the amplitude and period of sidewall profiles are normalized by the sensitive grid width. The relative resistance change of the strain gauge model with varying sidewall profiles was calculated. The results indicate that the micro-morphology on the sidewall profile led to the deviation

APA, Harvard, Vancouver, ISO, and other styles

8

Azuma, Toyohiro, Eiji Niwa, Yu Xin Peng, et al. "Cr-N Strain-Gauge-Type Precision Displacement Sensor for Measuring Positions of Micro Stage." Key Engineering Materials 523-524 (November 2012): 939–44. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.939.

Full text

Abstract:

A strain-gauge-type precision displacement sensor, which is developed for a usage of micro-XY stage, is described in this paper. A thin-film strain-gauge element, which is made by Cr-N alloy, is directly fabricated on the base of the strain gauge. The direct fabrication and using the Cr-N element are expected to achieve higher sensitivity for displacement detection and better stability against the change of ambient temperature. In this study, several designs of the thin-film strain gauge, including both of two-gauge-type and four-gauge-type, are prepared to compare sensor performances such as

APA, Harvard, Vancouver, ISO, and other styles

9

Kang, Hyunkyoo, Seokjin Kim, Jaehak Shin, and Sunglim Ko. "Inkjet-Printed Flexible Strain-Gauge Sensor on Polymer Substrate: Topographical Analysis of Sensitivity." Applied Sciences 12, no. 6 (2022): 3193. http://dx.doi.org/10.3390/app12063193.

Full text

Abstract:

Inkjet-printed strain gauges on flexible substrates have recently been investigated for biomedical motion detection as well as the monitoring of structural deformation. This study performed a topographical analysis of an inkjet-printed strain gauge constructed using silver conductive ink on a PET (polyethylene terephthalate) substrate. Serpentine strain-gauge sensors of various thicknesses and widths were fabricated using inkjet printing and oven sintering. The fabricated gauge sensors were attached to curved surfaces, and gauge factors ranging from 2.047 to 3.098 were recorded. We found that

APA, Harvard, Vancouver, ISO, and other styles

10

Cristofolini, L., B. P. McNamara, A. Freddi, and M. Viceconti. "In vitro measured strains in the loaded femur: Quantification of experimental error." Journal of Strain Analysis for Engineering Design 32, no. 3 (1997): 193–200. http://dx.doi.org/10.1243/0309324971513337.

Full text

Abstract:

The application of strain gauges to bone surfaces has been extensively employed as a method of determining, strain fields in response to implanted devices in orthopaedics. The aim of this study was to determine some of the experimental errors associated with the use of strain gauges in in vitro experimental investigations of the loaded femur. An experimental protocol was devised to obtain strain data at 20 strain gauged locations on the proximal femur. These data were interpolated using a parametric model. The parametric model was then used to estimate the errors associated with mispositioning

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Strain gauge"

1

Huang, Jun Fei. "Stress-strain models for light-gauge carbon steels." Thesis, University of Macau, 2012. http://umaclib3.umac.mo/record=b2586269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tuncay, Orbay. "Wireless Strain Gauge System in a Multipath Environment." The Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=osu1222089977.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Welham, Christopher J. "A silicon micromachined lateral resonant strain gauge pressure sensor." Thesis, University of Warwick, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389458.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Suslov, E., O. Nozhenko, and A. Mostovych. "Strain gauge measurement data analyzing for flat wheel detection." Thesis, Національний авіаційний університет, 2017. http://er.nau.edu.ua/handle/NAU/32947.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Khanniche, Rachid. "Characterisation of an optical strain gauge for pantograph applications." Thesis, Swansea University, 2002. https://cronfa.swan.ac.uk/Record/cronfa42266.

Full text

Abstract:

An optical strain gauge is developed and characterised for an active pantograph for high-speed electrical trains applications. The pantograph is subjected to a continuous impact forces when it makes contact with the 25 kV overhead AC line. The carbon based pantograph head is susceptible to crack damage due to these impacts An optical strain gauge based on the photo-elastic effect has been developed to monitor on line the contact force applied to the pantograph. The sensing system exploits the concept of chromatic modulation that can be produced by spectral changes induced by a controlled biref

APA, Harvard, Vancouver, ISO, and other styles

6

Creasey, Christopher David. "The development of a hand-held optical diffraction strain gauge." Thesis, Loughborough University, 1998. https://dspace.lboro.ac.uk/2134/27041.

Full text

Abstract:

The measurement of strain is critical in many engineering design, test, and health monitoring procedures. Despite the promise of non-contacting and remote strain measurement, optical techniques have not been widely adopted by industry; the preference being the use of electrical resistance strain gauges. This is due to the perceived and real complexities of many optical techniques.

APA, Harvard, Vancouver, ISO, and other styles

7

Erm, Lincoln P. Ferrarotto Phil. "Development of a five-component strain-gauge balance for the DSTO water tunnel." Fishermans Bend, Vic. : Defence Science and Technology Organisation Air Vehicles Division, 2009. http://hdl.handle.net/1947/10033.

Full text

Abstract:

Mode of access: Internet via World Wide Web. Available at http://hdl.handle.net/1947/10033.<br>"November 2009". Available on the DSTO website as at DSTO at :http://dspace.dsto.defence.gov.au/dspace/bitstream/1947/10033/1/DSTO-GD-0597%20PR.pdf

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Sihao. "Effect of aeroelasticity in tow tank strain gauge measurements on a NACA 0015 airfoil." Ohio : Ohio University, 1993. http://www.ohiolink.edu/etd/view.cgi?ohiou1175713922.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Russell, Scott A. "Strain gauge measurements of blade resonance using eddy current excitation in a vacuum spin pit." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2002. http://library.nps.navy.mil/uhtbin/hyperion-image/02sep%5FRussell.pdf.

Full text

Abstract:

Thesis (M.S. in Aeronautical Engineering)--Naval Postgraduate School, September 2002.<br>Thesis advisor(s): Raymond P. Shreeve, Garth V. Hobson. Includes bibliographical references (p. 93). Also available online.

APA, Harvard, Vancouver, ISO, and other styles

10

Remington, Taylor David. "Biomechanical Applications and Modeling of Quantum Nano-Composite Strain Gauges." BYU ScholarsArchive, 2014. https://scholarsarchive.byu.edu/etd/4407.

Full text

Abstract:

Biological tissues routinely experience large strains and undergo large deformations during normal physiologic activity. Biological tissue deformation is well beyond the range of standard strain gauges, and hence must often be captured using expensive and non-portable options such as optical marker tracking methods that may rely upon significant post-processing. This study develops portable gauges that operate in real time and are compatible with the large strains seen by biological materials. The new gauges are based on a relatively new technique for quantifying large strain in real-time (up

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Strain gauge"

1

L, Window A., ed. Strain gauge technology. 2nd ed. Elsevier Applied Science, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

E, Reed S., Hannah R. L, and Society for Experimental Mechanics, eds. Strain gauge users' handbook. Chapman & Hall, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Valis, Tomas. Fiber optic Fabry-Perot strain gauge. [s.n.], 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Harvey, J. F. A microprocessor controlled strain gauge calibration module. Aeronautical Research Laboratory, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

United States. National Aeronautics and Space Administration., ed. Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge. NASA, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

United States. National Aeronautics and Space Administration., ed. Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge. NASA, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

United States. National Aeronautics and Space Administration., ed. Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge. NASA, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

United States. National Aeronautics and Space Administration., ed. Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge. NASA, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

S, Tripp John, Tcheng Ping, and Langley Research Center, eds. First International Symposium on Strain Gauge Balances. National Aeronautics and Space Administration, Langley Research Center, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pollock, N. An improved strain gauge transducer amplifier for wind tunnel use. Aeronautical Research Laboratories, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Strain gauge"

1

Gooch, Jan W. "Strain Gauge." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Peter, Helga. "Strain gauge." In Springer Reference Medizin. Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-642-54672-3_918-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Peter, Helga. "Strain gauge." In Springer Reference Medizin. Springer Berlin Heidelberg, 2025. https://doi.org/10.1007/978-3-662-65186-5_918.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Little, E. G. "Strain gauge measurement." In Strain Measurement in Biomechanics. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2330-3_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sujatha, C. "Strain Gauge-Based Equipment." In Vibration, Acoustics and Strain Measurement. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-03968-3_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gupta, S. V. "Strain Gauge Load Cells." In Mass Metrology. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23412-5_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gupta, S. V. "Strain Gauge Load Cells." In Mass Metrology. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12465-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Schajer, Gary S., and Philip S. Whitehead. "Strain Gauge Technique: Method Description." In Hole-Drilling Method for Measuring Residual Stresses. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-031-79713-2_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

dos Santos, Elton Fernandes, Vlademir de Jesus Silva Oliveira, Wagner de Almeida Ferreira, and Julio César Beltrame Benatti. "Applied Instrumentation: Strain Measurements Using Arduino and Strain Gauge." In Proceedings of the 3rd Brazilian Technology Symposium. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-93112-8_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Masear, V. R. "Strain Gauge Measurement in Carpal Bone." In Biomechanics of the Wrist Joint. Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4612-3208-7_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Strain gauge"

1

Sirohi, Rajpal S., Fook S. Chau, Siew-Lok Toh, and Elgin T. Quek. "Optical strain gauge." In International Conference on Applied Optical Metrology, edited by Pramod K. Rastogi and Ferenc Gyimesi. SPIE, 1998. http://dx.doi.org/10.1117/12.323334.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mignolet, Marc P., and Byeong-Keun Choi. "Robust Optimal Positioning of Strain Gauges on Blades." In ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30454.

Full text

Abstract:

This paper focuses on the formulation and validation of an automatic strategy for the selection of the locations and directions of strain gauges to capture at best the modal response of a blade in a series of modes. These locations and directions are selected to render the strain measurements as robust as possible with respect to random mispositioning of the gauges and gauge failures. The approach relies on the evaluation of the signal-to-noise ratios of the gauge measurements from finite element strain data and includes the effects of gauge size. A genetic algorithm is used to find the strain

APA, Harvard, Vancouver, ISO, and other styles

3

Mosaiebian, Arash, Debora Martogi, Ali Ebrahimi, and Amir Ahmadipur. "An Automated Real-Time Data Analysis Tool for Interpreting Strain Gauge Data." In 2024 15th International Pipeline Conference. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/ipc2024-134051.

Full text

Abstract:

Abstract Strain gauges are among the common instruments used to monitor pipelines threatened by geohazards. Strain gauges, for the purpose of geohazard monitoring, are installed at three or four locations around the circumference of the pipe to measure strain changes due to ground movement. Data from these gauges are typically collected in near real-time if a telemetry station is installed, offering continuous monitoring. This paper presents an automated data analysis tool for pipeline strain monitoring, which processes and analyzes the strain gauge data in real-time. In just a few minutes, th

APA, Harvard, Vancouver, ISO, and other styles

4

Szwedowicz, J., S. M. Senn, and R. S. Abhari. "Optimum Strain Gauge Application to Bladed Assemblies." In ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30306.

Full text

Abstract:

Optimum placements of the strain gauges assure reliable vibration measurements of structural components such as rotating blades. Within the framework of cyclic vibration theory, a novel approach has been developed for computation of the optimum gauge positions on tuned bladed discs regarding the determined sensitivity, orthogonality, gradient and distance criteria. The utilized genetic algorithm optimization tool allows for an effective numerical search of suitable solutions of the defined optimization function. A rotating impeller disc represented by a cyclic finite element model demonstrates

APA, Harvard, Vancouver, ISO, and other styles

5

Li, Jinggao, Jon P. Longtin, Szymon Tankiewicz, Andrew Gouldstone, and Sanjay Sampath. "Characterization of Interdigital Capacitive Strain Gauges by Direct Write Technology." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72769.

Full text

Abstract:

Interdigitated capacitive strain gauges have several distinct advantages over resistive-based strain gauges, particularly for applications in harsh environments, such as high-temperature environments. In this work capacitive strain gauges have been fabricated using thermal spray technology. Gauges are fabricated using both a direct-write approach where the gauge is fabricated using a computer-controlled deposition system and by ultrafast laser micromachining in which blanket coatings sprayed onto a substrate are subsequently laser micrornachined. Silver coatings were sprayed onto plastic, poly

APA, Harvard, Vancouver, ISO, and other styles

6

Batchelder, David N., and Costas Galiotis. "The Raman Optomechanical Strain Gauge." In Stress and Vibration: Recent Developments in Measurement and Analysis, edited by Peter Stanley. SPIE, 1989. http://dx.doi.org/10.1117/12.952903.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Xu, Zhaowen, Zhigang Wu, Weiqing Gao, Shuzhong Yuan, and Xiaoyi Dong. "Novel twisted fiber strain gauge." In Photonics Asia 2002, edited by Yun-Jiang Rao, Julian D. C. Jones, Hiroshi Naruse, and Robert I. Chen. SPIE, 2002. http://dx.doi.org/10.1117/12.482012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yamaguchi, Ichirou, Takeo Furukawa, Toshitsugu Ueda, and Eiji Ogita. "Accelerated Laser-Speckle Strain Gauge." In 29th Annual Technical Symposium, edited by Henri H. Arsenault. SPIE, 1985. http://dx.doi.org/10.1117/12.949532.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sulwinski, Rafal, and Rusty Johnston. "Methodology for Validation of Finite Element Analysis Utilizing Strain Gauge Measurements." In ASME 2023 Verification, Validation, and Uncertainty Quantification Symposium. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/vvuq2023-108749.

Full text

Abstract:

Abstract As analysis utilizing Finite Element Method (FEM) has become widely adopted in engineering practices and incorporated into governing standards, physical validation of these analyses is often forgone. Physical validation gives insight into the validity of assumptions and simplifications commonly used to efficiently process FEM simulations. This paper proposes that one reason physical validation is commonly forgone is a lack of knowledge of a general end to end methodology for the physical measurement, processing, and comparison of data. This paper presents such a methodology for the co

APA, Harvard, Vancouver, ISO, and other styles

10

Takahama, Tsunemichi. "A Method for Measuring Combined Stress of Small Bore Piping Around Weld in Field Using Strain Gauge Holder." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21426.

Full text

Abstract:

Abstract This paper proposes using the strain gauge holder which has 12 elements of strain gauge in order to measure the 2 directional bending stresses and the torsional stress synchronously around the weld in small bore piping. The paper also provides the actual measured dynamic stresses around the welds in real fields including combined stress by the strain gauge holder. The measured stresses are shown on a time axis, on a frequency axis, on an X-Y display like Lissajous figure, and on an X-Y-Z 3D display. It was confirmed that the strain gauge holder was able to be installed within 20 minut

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Strain gauge"

1

Ebrahimi, Ali, and Suraj Khadka. PR445-233902-R01 Operating Range of Vibrating Wire Strain Gauge for Pipeline Monitoring. Pipeline Research Council International, Inc. (PRCI), 2025. https://doi.org/10.55274/r0000133.

Full text

Abstract:

This report details the laboratory testing program conducted to assess the operating range of the spot-weldable vibrating wire (VW) strain gauges with a specific focus on most commonly used strain gauges for pipeline monitoring. These strain gauges are commonly used by the pipeline operators for long-term monitoring of a change in the pipe strain due to geohazard activities. The primary goal of the laboratory testing program was to assess the response of these strain gauges within the operating range and their behavior as they approach or exceed the manufacturer-specified operating range. This

APA, Harvard, Vancouver, ISO, and other styles

2

Kercel, S. W. OTDR strain gauge for smart skins. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10185096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Stimson, M. G., and J. G. Sparrow. Evaluation of a Hand-Held Frictional Strain Gauge. Defense Technical Information Center, 1987. http://dx.doi.org/10.21236/ada198125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Yee, Kenneth W. Automation of strain-gauge load-cell force calibration. National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4823.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Turner, Daniel Z. An Overview of the Virtual Strain Gauge Formulation in DICe. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1528762.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Moss, Eric. Strain Gauge Diagnostic Development for use in Vessel Health Monitoring for Hydro-shots. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1856127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Wands, R., K. Weber, and J. Zurawski. Summary of ANSYS and Strain Gauge Results for the EC Calorimeter OH and MH Modules. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/1030722.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Holden, T., J. Root, and R. Hosbons. CWI1988-Andi-12 Neutron Diffraction of Axial Residual Strains in the Vicinity of a Girth Weld. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0011390.

Full text

Abstract:

Recent research has shown that neutron diffraction is a practical non-destructive method for determining residual strains in the vicinity of a girth weld in line pipe. The basis of the technique is that the distance between planes of atoms is used as a miniature, directional, internal strain gauge, just as for X-ray measurements. However, the penetration of neutrons into metals ls from 1000 to 10,000 times greater than that of X-rays, so that measurements may easily be made throughout the thickness of steel pipe including the region of the weld itself. The purpose of the present measurements w

APA, Harvard, Vancouver, ISO, and other styles

9

Phero, Timothy, and Michael McMurtrey. Strain gauge for testing microreactor hexagonal core blocks in the Single Primary Heat Extraction and Removal Emulator. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1887093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bala. L51600 Engineering Critical Assessment of Girth Welds in Small Diameter Pipe. Pipeline Research Council International, Inc. (PRCI), 1989. http://dx.doi.org/10.55274/r0010101.

Full text

Abstract:

Transmission pipeline girth welds are fabricated and inspected to rigorous material standards such as API 1104, CSA Z 184 and BSI 4515. These standards contain weld defect acceptance levels based on good workmanship criteria and have been arrived at on the basis of traditional welding and inspection practices. In certain instances, defects that do not meet the workmanship standards have been accepted on the basis of an engineering critical assessment (ECA) using the British Standard PD 6493 assessment technique. The use of ECA is now being incorporated into the pipeline codes. Four girth welds

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!