To see the other types of publications on this topic, follow the link: Střižník.
Dissertations / Theses on the topic 'Střižník'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 29 dissertations / theses for your research on the topic 'Střižník.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Drápala, Miroslav. "Výroba výztuže dveřního zamykání sdruženým nástrojem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231254.
Full textAbstract:
The submitted project was created in the engineering studies of M-STG Machinery technologies and it is focused on problematics of production of reinforcement door locking. Component will be manufactured by cutting and bending technologies and used material is aluminium alloy EN AW-3103. As a manufacturing stock is used roll of sheet. Manufacturing series is 400 000 pieces a year. Literary study was created according to the mentioned technologies. After the control calculation was proccesed, the compound tool was designed. As a working machine was selected accentric press SMERAL LE 250/40, where the compound tool will be clamped.
2
Brdečková, Zuzana. "Technologie zhotovování drážek do pláště kotvy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231214.
Full textAbstract:
The aim of the thesis is the design of the production process and tools for production of two grooves in coats of concrete clamp. Shell anchors are made of longitudinally welded stainless steel tubes 17 240. The size of the production of all types of shell of concrete clamps is 18 000 PCs per year. The number and the dimensions of grooves in the coats of anchors were determined on the basis of a practical verification. To the present day the grooves are made by cutting on a band saw, which is little productive and on finishing operations demanding way. The grooves in the coats of anchors will be newly manufactured by technology of shearing, which was a literary study. On the basis of the calculations was selected for the production a hydraulic press of CUPS 25 D. The grooves will be produced on the newly designed shearing tool. Work is carried out by technical-economic evaluation, which compares the current technology of production with the newly proposed technology. Part of the thesis is drawing documentation of coats of concrete clamps of all dimensions and drawing documentation of shearing tool.
3
Lata, Miroslav. "Výroba součásti technologií přesného stříhání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229087.
Full textAbstract:
The diploma thesis deals with a propose of a new manufacturing technology of component called „KULISA“ drawing number 4-DP-05-10/01. The beginning of this work is prepared as a literary study about blanking. There are explained some basic concepts necessary to introduce a blanking topic. Other interest of this work is an assessment of actual state of conventional blanking technology which is being currently used for component production. With regard to the deficiencies of the existing method is proposed new technology of fine blanking. In the proposal is evaluated technological site of component construction and blanking tools are proposed with stress analysis included. Last part of the work deals with the economic evaluation, where is being compared efficiency of existing and new technology.
4
Kosíř, Tomáš. "Návrh výroby krytu senzoru vyráběného technologií přesného stříhání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231168.
Full textAbstract:
Master´s thesis project elaborated within the scope of Master´s degree submits a proposal of manufacturing of sensor cover by fineblanking technology. Sensor cover is manufactured from 4 mm roll of sheet metal. The material component is microalloyed steel S355MC. Annual production batch is 800 000 pieces. Based on the literature study, several possible methods of production parts are described. After evaluation of the required accuracy, surface quality and annual production, the technology of fineblanking using V-ring has been chosen. On the basis of technological and control calculations was chosen the triple action hydraulic press HFA 4500 plus, made by Feintool with a rated power 4500 kN. Design of cutting tool has been designed with moving punch.
5
Jabůrek, Petr. "Technologie výroby plechových klecí pro radiální soudečková ložiska." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228162.
Full textAbstract:
The project conceived within engineer’s studies of branch 2303T002 is subbmitting a proposal for radial bearing cage produce technology. It is also subbmitting a design solution to functional parts for blanking the “windows” and coining the “locks”. The cage will be made from sheet steel 11 300.29. This cage should replace the current one machined from the brass Ms 58 Al. According to the literary research and development experiences of the company ZKL Brno, a.s., two pairs of tools were designed. First one for blanking the “windows” and second one for coining the “locks”. Blanking punch, blanking die and coining punch will be made from the steel 19436, coining die will be made from the steel 19312. Heat-treating process will be accomplished according to the enclosed drawings. Both pairs of tools will be mounted in the press LENR 63 AU (manufactured by the company ŠMERAL Trnava), with nominal force 630 kN.
6
Vejrek, Tomáš. "Návrh progresivní technologie výroby střižného nástroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229158.
Full textAbstract:
Proposal progressive technology of production shearing tools. Description shearing tools and shear of the process, analysis current technology production shearing tools. Proposition two variant technology production given to dies method conventional and unconventional, elaboration technological progress and programmes on choice NC machinery, their comparison and technical economic evaluation in fine with recommendation for usage practically.
7
Kučera, Radek. "Výroba části univerzálního otvíráku technologií přesného stříhání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231191.
Full textAbstract:
The aim of the thesis is to design a manufacturing technology of a part of the universal opener with an innovated design. The component is made of stainless steel 17 240 (X5CrNi18-10). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size (200 000 pieces) and to the required quality of the component the fineblanking technology has been selected. For the manufacturing of the component a triple action hydraulic press HFA 3200plus has been chosen. This press will be coupled in production line with a feeding line FBA 8/300. The main point of the thesis is to design a cutting tool and to create a drawing documentation. Another part of the project is the technical and economical evaluation of the designed manufacturing process.
8
Kašpar, Jaroslav. "Návrh výroby konzoly." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401025.
Full textAbstract:
The thesis deals with the production concept of the bracket for fixing the drying frame. The component is made of 11 343 steel. The semi-finished product is galvanized sheet with 2 mm thickness. With regard to the required quality of the component and the yearly production quantity (40,000 pieces), a new production technology was chosen based on a literary study by means of conventional shearing in a tool, followed by bending on a press brake. For the selected technologies, technological calculations and a cutting tool were designed, which are dealt with in the drawing documentation. The work also includes technical-economic evalua-tion of the proposed production method.
9
Kummer, Michal. "Výroba ohýbaného profilu sdruženým nástrojem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229698.
Full textAbstract:
This diploma thesis describes the creation of the technological process for shelf clutch production. The shelf clutch will be made of material 11 321 by cutting and bending technologies. The first part of thesis includes the theoretical description of cutting and bending technologies. The second part contains calculations and design proposal of final combined cutting and bending tool and also selection of pressing machine. The thesis contains the unit block layout of the combined cutting and bending tool and detailed drawings of cutting and bending parts of the tool. The shelf clutch drawing is included too.
10
Kraval, Jiří. "Výroba držáku magnetu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241157.
Full textAbstract:
This project developed within the engineering studies of M-STG submits a proposal of a production technology of production of the magnet holder made of DC03. Based on a literary study of the problem of cutting, drawing, bending and calculations manufacturing of the component in a production die was suggested. The production die uses a normalised component and is tightened on PE 100 crank press with nominal drawbar pull 1000 kN. The conclusion of the thesis deals with the economic benefit of the suggested manufacturing technology.
11
Straka, Jan. "Návrh nástroje pro vystřižení tvarového přístřihu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399397.
Full textAbstract:
The thesis presents a design of a progressive cutting tool for the production of shaped blanks from sheet metal Usibor 1500 (22MnB5) with a thickness of 1.5 mm. The tool is designed by using CATIA V5 software in cooperation with Žďas, a.s. company. Based on the literature review of the cutting process, cutters were designed, shear clearance and order of operations in the tool were determined. The proposed cutting tool consists of both manufactured and standardized parts. Tool parts fall out of the chute onto the conveyor belt. The tool is designed to operate on an AIDA 1000 excentric press with a nominal force of 10,000 kN. Cutters that are not standardized are made of tool steel and heat treated according to drawing documentation.
12
Habr, Stanislav. "Výroba řetězového kolečka u horského kola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230366.
Full textAbstract:
HABR Stanislav: Manufacturing of chain wheel for mountain bike The goal is to design components of chain wheel for mountain bike. It will be made of structural steel. The variant was chosen the most optimal production through precise cutting edge of pushing the system hard punch tool – movable retainer. According to the calculations and dimensions were selected from company press Feintool. The economic evaluation is the annual dose 600000 pcs fixed price of one component of 11,88 CZK.
13
Kantor, Miroslav. "Návrh výroby brzdového kotouče vyráběného technologií stříhání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231055.
Full textAbstract:
The purpose of the diploma thesis is to design a manufacturing technology of the Brake Disk. The component is made of stainless steel 17 023 (X30Cr13). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size 200 000 pieces the fineblanking technology has been chosen. For the manufacturing has been chosen HFA 700 press. The major point of diploma thesis is to design a cutting tool and create a drawing documentation. The part of the project is the technical and economical evaluation of the designed manufacturing process.
14
Konečný, Martin. "Pevnostní výpočet a optimalizace skříně válcového drtiče zrna S 900." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228058.
Full textAbstract:
This thesis deal with stress control of frame of crushing mill of grain with the aim of defining and consequent optimalization of undersized and overlarge parts of the construction. This frame is screwed assembly. Control is static analysis of frame. This analysis use Finite Element Method.
15
Garguláková, Lucie. "Návrh výroby součásti polohovacího mechanismu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228616.
Full textAbstract:
The disertation is focused to the technology of fineblanking. It is concerned to a production of part, which will be used as a mechanism for changing the position of seats in cars. The expected production series is 800.000 pieces per year. With reference to the quantity and demanded quality and also accuracy of blank is choosed precisely technology of fineblanking process with pressure edge. The part will be produced on triple-action press produced by Feintool AG Lyss. It is press GKP – F 160 with mechanical-hydraulic drive. This press and specialy create blanking tool produces two blanks per one action.
16
Suchomel, Lukáš. "Výroba ocelové součásti technologií stříhání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228613.
Full textAbstract:
The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
17
Augste, Jakub. "Výroba části zámku automobilu přesným stříháním." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228615.
Full textAbstract:
The project elaborated in frame of engineering studies branch Manufacturing Technology (N2307-00) is submitting design of technology production of the latch claw. The latch claw is a component of a car side-door latch assembly and can be used for different car models. The part is made of sheetmetal 4 mm thick. The material for the part is 15CrMo5, alloy steel for case-hardening purposes. Pursuant of the literary pursuit was designed several options of the part manufacture. With regard to required dimensional accuracy, cut-edge quality and expected production run (800 000 pcs. per year) was proposed manufacturing the part by fineblanking technology. Fineblanking is a cost-effective manufacturing method for accurate sheetmetal parts. For manufacturing parts was chosen Feintool hydraulic fineblanking press HFA 3200plus with total force 3200 kN. The press is coupled to a coil reel a strip straighter. Both units of Feintool feeding line FBA 8/300 are very compact, reducing space requirement. For the fineblanking tool design is used a moving-punch system because these tool systems are compact and economical to make and use. The tool make use of standardized cast iron fineblanking die set made by Fibro company. At the conclusion was compared the cost-effectiveness between two production methods – fineblanking with that of laser beam cutting.
18
Oborný, Roman. "Výroba spony bezpečnostního pásu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227866.
Full textAbstract:
Aim of this Thesis is to assess the existing manufacturing method and to propose and make out an optimum manufacturing method for the part „seat belt buckle“. Components made of the steel plate 14 220.3. With respect to requested accuracy, quality and expected production run of 1 000 000 pcs per year, the Thesis includes the proposal of manufacture of the part by a method of accurate cutting with push-on edge. Is designed the cutting tool and selected the suitable machine type for this technology Feintool HFA 3200 Plus. The work contains necessary calculations, economical evaluation and design documentation of the processual tools for the components production. The last part contains the technical and economic evaluation, from which results that, technically and economically, the new production technology is preferable to the existing technology.
19
Chaloupková, Lucie. "Navržení vhodných technologií výroby zadané ploché součásti z plechu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229914.
Full textAbstract:
The project is elaborated in frame of engineering studies branch 2303T002. The project is submitting suggestion of convenient technologies of production for submitted flat sheet metal part 11 375. There are proposed a number of variants of production method, namely: production on sequence shearing tool, production by means of plasma machine, laser machines and machines for watejets cutting. Particular part is designed for the production quantity of 380 000 pieces per year. Based on the literary study of the shear and calculations, there were designed shearing tool for given part. For this tool the press CDCH 3000 P was selected (producer HESSE+CO Maschinenfabrik GmbH), with nominal force 3 000 kN. In the work there are included necessary calculations for all variants including technological and economical evaluation.
20
Svoboda, Jiří. "Nekonvenční technologie elektroerozivního drátového řezání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229332.
Full textAbstract:
This thesis deals with technology of electric discharge machining with emphasis on application of the principle of material removal on wire cut electric discharge machine. The main part is concentrated on wire cut electric discharge machining in terms of a small tool making shop. The goal of the thesis is to create a wire cut electric discharge machining workplace in the company with a focus on the production of cutting tools. The thesis defines requirements for each component of cutting tools and strategies for their machining. Machining of model part and subsequent technical - economic evaluation is included in the final part.
21
Dziuban, Jiří. "Úpravy střižných postupových nástrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241921.
Full textAbstract:
This thesis explains how to determine and eliminate the causes of quality problems in the production of connectors and small electronic components for the automotive industry. The process of making these components is carried out by use of both high speed and low speed metal stamping presses. There are descriptions of the different designs of editing punches, stamping dies, trimming and molding tools and how unplanned issues can occur during the production process. It addresses all the customer requirements for quality end products, listing the type of material, finishes and technology used for the production of individual components as well as their functionality, durability, and economic impacts. All examples of changes in the design or technology of metal stamping presses are based on many years of practical experience and most of them can be successfully applied in other similar type of instrument production.
22
Kolbábek, Lukáš. "Lis LKDS 800." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230292.
Full textAbstract:
The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel, spur gearing and clutch/brake combination. This computation is followed by computations of individual construction nodes, which include a design and dimensioning of the individual joggles, shafts and bearings. The drawing of the press and clutch shaft assemblies with a list of items are also included.
23
Kuchařík, Milan. "Drátové elektroerozivní obrábění při výrobě přesných střižných nástrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228030.
Full textAbstract:
Work is focused on theoretic analisis of manufacturing precise shears tools by unconventional technology closely focused on wire electro discharge machining consideration operation costs of this metod.It is discribing development of this method, machines and tools for electrical discharge machining. It is mention facts influencing quality of cut surface during manufacturing of cutting tools, strategy of cutting workpiece, stage and quality of surface layer after WEDM as long with economic viewpoint and benefits of WEDM technology.
24
Humpolíček, František. "Lis LKDS 630." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382279.
Full textAbstract:
Final thesis on the design of the drive of a cutting mechanical two-point crank press with a nominal force of 6300 kN. After the theoretical definition of the area of mechanical crank presses and their drives at the beginning of the work, the actual design solution follows. The main idea of the design is the drive arrangement with the concurrent axis of the clutch shaft. The supplied torque is distributed on two longitudinally mounted drive units via a two-sided bevel gear. Solution of the construction design is aimed at enabling workspace variability while simultaneously unifying the maximum number of drive components. Drawing documentation of selected components and assemblies is the part of the thesis.
25
Dvořák, Jiří. "Technologie výroby vymezovací podložky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229697.
Full textAbstract:
This master’s thesis has been elaborated as a part of master’s studies of engineering technology M2I-K, major in M-STM – Engineering technology and industrial management and deals with the problem of a transition to a self-production of previously purchased distance washers. Distance washers were purchased in six different types of similar shape, each type in four different thicknesses. One of these types was chosen as a representative for this master’s thesis. We shall explore the possibilities of self-production with the emphasis on economical validation of the transition. The distance washer is a flat part, the intermediate being sheet metal. Technologies considered for manufacturing the washers correspond to the technical facilities and equipment available at the production hall of the company this project is planned for. The company possesses technology for CO2 laser cutting, cutting by CNC punching machine and cutting in the punching tool. To provide a complex overview we shall also enquire into cooperated technologies such as water jet and plasma cutting, oxy-acetyleny cutting and CNC working. All options are evaluated with regard to the production expenses and lead to a most economically plausible method of manufacturing or, if need be, give reasons for going back to purchasing the part from the current supplier.
26
Konečný, Lukáš. "Hodnocení vybraných jakostních znaků masa." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-92576.
Full text
27
Bukovská, Zita. "Lokalizace deformace v anizotropních horninách: důsledky pro geodynamické interpretace." Doctoral thesis, 2015. http://www.nusl.cz/ntk/nusl-349335.
Full textAbstract:
Localization of deformation occurs in Earth's crust as a consequence of applied stress and is widespread phenomenon that can be found in crustal rocks. Such localization of deformation can be mostly seen in a form of shear zones. Small shear zones referred as shear bands or S-C structures are often used as kinematic indicators. However, the evolution and kinematic continuity of such structures is not well identified, which makes it problematic when interpreting regional geodynamic evolution. Two possible cases were distinguished and described in this thesis: a) kinematically discontinuous S-C structures formed during two deformation events and b) kinematically continuous S-C structures formed during single deformation event. Kinematically unrelated S-C structures were studied in westernmost part of Tauern Window in Eastern Alps and in Gemer-Vepor Contact Zone in Central West Carpathians where previous geodynamic interpretations might have misinterpreted localization structures. Kinematically continuous shear bands were studied in South Armorican Shear Zone where the S-C fabrics were originally defined and described (Berthé et al., 1979). Two fabrics that crosscut each other at small angles forming S-C geometries were documented during field work and studied from macroscale down to microscale or...
28
Peřestý, Vít. "Role deformačního členění na tektonický vývoj rozhraní suprastruktury a infrastruktury v tepelsko-barrandienské oblasti." Doctoral thesis, 2019. http://www.nusl.cz/ntk/nusl-397443.
Full textAbstract:
Upper part of the orogenic crust (superstructure) significantly differs from the lower part of the crust (infrastructure) by structural and metamorphic record. This fundamental observation is explained by interruption of the mutual evolution due to mechanical decoupling of the hot and ductile infrastructure from the cold and brittle superstructure at certain stages of the orogenic evolution. The superstructure-infrastructure transition zone is a rheologically predisposed domain of sharp deformation and metamorphic gradients with polyphase structural record. Understanding of the deformation partitioning in such a rheologically complex setting is a key aspect in linking of the individual deformation stages between upper and lower crust. The transition zone between unmetamorphosed early-Variscan superstructure (Teplá-Barrandian Domain) and late Variscan high- grade infrastructure (Saxothuringian Domain) crops out at the western margin of the Teplá- Barrandian Domain in the Bohemian Massif. This area is a continuous mid- to lower-crustal section with early-Variscan structural and metamorphic record, which is superposed onto pre-Variscan episode. This thesis aims to decipher individual deformation events, to evaluate their manifes- tations at different crustal levels and to bring new and unifying...
29
Tomek, Filip. "Kinematický vývoj rozhraní tepelsko-barrandienské jednotky a moldanubika během svrchního devonu a spodního karbonu." Master's thesis, 2011. http://www.nusl.cz/ntk/nusl-312482.
Full textAbstract:
ENGLISH ABSTRACT The Late Devonian to Early Carboniferous kinematic evolution of the Teplá-Barrandian/Moldanubian boundary The Staré Sedlo complex (SSC) is a relic of meta-igneous arc-related pluton in the southern part of the Sedlčany-Krásná Hora roof pendant, intruded by granitoids of the Central Bohemian Plutonic Complex along the boundary of Teplá-Barrandian (TBU) and Moldanubian units (MU), Bohemian Massif. The SSC mainly comprises deformed orthogneisses of calc-alkaline granodiorite to tonalite protoliths of Late Devonian age (380−365 Ma; Košler et al., 1993) that were commonly mingled with minor basic magmas. Locally preserved subhorizontal intrusive contacts of the orthogneisses against their meta-sedimentary host rock indicate that these magmas intruded as a sill complex. The SSC preserves a rather unusual flat-lying subsolidus foliation (dip <40ř) associated with subhorizontal ~NE-SW-trending mineral lineation. Mesoscopic structures, anisotropy of magnetic susceptibility (AMS), and deformational microstructures indicate prolate shape of the strain ellipsoid with dominant coaxial pure shear regime. The solid state microstructures record cooling of the orthogneiss protolith down to the ambient greenschist facies conditions followed by its static recrystallization due to the intrusion of the younger...