Relevant bibliographies by topics / Structural Properties of Bronze Powder

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Structural Properties of Bronze Powder'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Structural Properties of Bronze Powder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Structural Properties of Bronze Powder"

1

Ilyushchanka, A. Ph, A. V. Leshok, A. I. Letsko, and T. I. Pinchuk. "Study of the influence of ultra disperse powder additives of the NiAl/Al<sub>2</sub>O<sub>3</sub> system on the tribotechnical properties of the frictional material based on copper." Doklady of the National Academy of Sciences of Belarus 66, no. 1 (2022): 113–21. http://dx.doi.org/10.29235/1561-8323-2022-66-1-113-121.

Full text
Abstract:
The results on the impact of additives on the ultra-fine composite powder system, obtained by MASVS on the tribotechnical properties of friction material based on tin bronze with 12 % of tin are presented. It is shown that the powder additive in the range of 0.5–2.5 % increased the dynamic friction coefficient from 0.040 to 0.051. The introduction of a 1.5 % composite powder reduced the surface roughness of the counter body from 2.9 to 0.9 μm. The change in the tribotechnical properties is due to the structural changes in tin bronze, the additive particles, the surface layer of the friction ma
APA, Harvard, Vancouver, ISO, and other styles
2

Dorofeyev, V. Yu, E. N. Bessarabov, A. N. Sviridova, I. V. Ivanova, L. I. Svistun, and R. A. Vodolazhenko. "Structure and properties of hot-forged powder steel–bronze bimetal with SiC additives." Powder Metallurgy аnd Functional Coatings 18, no. 3 (2024): 16–27. http://dx.doi.org/10.17073/1997-308x-2024-3-16-27.

Full text
Abstract:
One of the main problems in the production of bimetals is associated with the difference in the physico-mechanical and structural properties of the materials being joined. Both solid-phase and liquid-phase methods are used to obtain bimetals. The main technological task is to create conditions for the formation of a transition zone between the working layer and adhesively bound substrate. We analyzed the known methods for producing compact and powder bimetals (insert molding, diffusion welding in the solid phase, infiltration, hot isostatic pressing, etc.). The bonding strength of bimetal laye
APA, Harvard, Vancouver, ISO, and other styles
3

Feraru (Ilie), Mihaela, Simona-Nicoleta Mazurchevici, Nicoleta-Monica Lohan, Marcelin Benchea, Fabian Cezar Lupu, and Dumitru Nedelcu. "Tribological and Structural Properties of Copper-Coated 3D-Printed Parts from Biodegradable Polymers." Micromachines 16, no. 1 (2025): 100. https://doi.org/10.3390/mi16010100.

Full text
Abstract:
This manuscript highlights the behavior of biodegradable polymers (PLA and HD PLA Green) coated with two distinct bronze alloy powders, Metco 51F-NS (Cu 9.5Al 1.2Fe) and Metco 445 (Cu 9.5Al). The coating was realized on printed samples by using the Atmospheric Plasma Spray (APS) technique. The current investigation will explain the results related to the surface quality, micro-structure, morphology, and thermal and tribological properties. Thus, from a structural point of view, the most uniform deposition was obtained in the case of composite powder Metco 51F-NS. The thermal behavior of the sa
APA, Harvard, Vancouver, ISO, and other styles
4

Padovezzi, Raphael Oliveira, Wagner Garcia Trindade, Gualtier Andersen Marques, et al. "Effects of the Additive Manufacturing Process on the Mechanical and Structural Properties of Bronze Alloys: a Review." Revista de Gestão e Secretariado 16, no. 7 (2025): e5057. https://doi.org/10.7769/gesec.v16i7.5057.

Full text
Abstract:
Additive manufacturing (AM) has emerged as a promising technology for producing metallic alloys with complex geometries and optimized properties, especially in the fabrication of bronze alloys. This literature review presents a comprehensive analysis of the effects of AM on the mechanical, microstructural, and functional properties of Cu-Sn, Cu-Al, and Cu-Ni-Al bronze alloys processed via WAAM, EBAM, SLM, CMTAM, and CSAM techniques. It discusses aspects such as microstructural evolution, intermetallic phase formation, hardness, tensile strength, wear, corrosion, and comparisons with convention
APA, Harvard, Vancouver, ISO, and other styles
5

Whittle, Thomas, and Siegbert Schmid. "Diffraction Studies of Tungsten Bronze Type Relaxor Ferroelectrics." Acta Crystallographica Section A Foundations and Advances 70, a1 (2014): C78. http://dx.doi.org/10.1107/s2053273314099215.

Full text
Abstract:
Ferroelectric materials are essential for modern electronic applications, from consumer electronics to sophisticated technical instruments. Relaxor ferroelectric materials provide the advantage of high dielectric constants over broad temperature ranges not seen in traditional ferroelectrics. Tungsten bronze type compounds have been shown to display a variety of industrially relevant optical and electronic properties amongst others. There is a fundamental relationship between the physical properties displayed by ferroelectrics and the crystal structures in which they form. Of particular interes
APA, Harvard, Vancouver, ISO, and other styles
6

Ada, Hakan, Emine Türkmen, Yavuz Kaplan, Elif Özçatalbaş, Ender Şatir, and Sinan Aksöz. "An examination of microstructure, microhardness and tribological properties of ceramic reinforced bronze matrix composite materials." Science of Sintering, no. 00 (2023): 42. http://dx.doi.org/10.2298/sos230414042a.

Full text
Abstract:
In order to obtain better mechanical properties in a bronze alloy, it is important to produce new materials by adding reinforcements and to offer these materials to the industry. In this study, bronze matrix (Cu10Sn) materials were reinforced with boron carbide (B4C) and silicon carbide (SiC) ceramic materials by using the mechanical alloying method. New composite materials were produced by powder metallurgy method by adding ceramic reinforcement (B4C and SiC) at 1, 2, 4 and 8 weight ratios to Cu10Sn alloy, which is the main matrix material. The obtained composite materials examined in terms o
APA, Harvard, Vancouver, ISO, and other styles
7

Shalunov, Evgeny, Sergey Shalunov, and Yulia Vladimirova. "Analysis of operating conditions of heavy-loaded and heat-stressed friction units of powerful internal combustion engines and development of copper nanocomposite powder materials for them." MATEC Web of Conferences 298 (2019): 00101. http://dx.doi.org/10.1051/matecconf/201929800101.

Full text
Abstract:
The article provides analysis of operating conditions for the «valve – valve guide» heavy-loaded and heat-stressed friction unit of the gas distribution mechanism of powerful internal combustion engines and establishes requirements to materials for valve guides. It describes nanoc omposite materials based on copper powder with aluminum, carbon, iron and oxygen additives developed by the authors of the present article. The reactionary mechanical alloying method and powder metallurgy technologies in use made it possible to develop materials having a dispersion-strengthened structure with nano-di
APA, Harvard, Vancouver, ISO, and other styles
8

Kulchin, Yuriy Nikolaevich, Nikolay Gennadievich Galkin, Evgenii P. Subbotin, Vasiliy M. Dolgorook, and Dmitrii S. Yatsko. "On the Principles of the Additive Technology Implementation of Composite Magnetic Coating’s Formation on Non-Magnetic Substrates by Laser Welding of Micro Powders." Solid State Phenomena 245 (October 2015): 230–37. http://dx.doi.org/10.4028/www.scientific.net/ssp.245.230.

Full text
Abstract:
The article discusses the formation of coatings with magnetic properties on non-magnetic substrates by the method of additive technology of metal powders using high power pulsed laser radiation. An instrumental base for the development of methods for creating local magnetic zones of a given configuration has been described. Approaches to create methods of additive welding of solid solution magnetic zones on the basis of micro-powders of metal alloys have been developed. The coatings with soft magnetic properties on the basis of powders of bronze and iron-containing "Inconel" alloy on non-magne
APA, Harvard, Vancouver, ISO, and other styles
9

BARYLSKI, Adrian, Krzysztof ANIOŁEK, and Sławomir KAPTACZ. "SCLEROMETRIC AND TRIBOLOGICAL PROPERTIES OF POLYTETRAFLUOROETHYLENE WITH 40% BRONZE CONTENT FORMED BY ELECTRON BEAM IRRADIATION." Tribologia 285, no. 3 (2019): 13–17. http://dx.doi.org/10.5604/01.3001.0013.5429.

Full text
Abstract:
The paper focuses on the improvement of sclerometric and tribological properties of polytetrafluoroethylene (PTFE) with 40% bronze content implied by irradiation with an electron beam of 10 MeV and a power of 10 kW, in a dose of 26–156 kGy. The results of the study confirm that radiation modification of the PTFE-bronze composite causes structural changes induced by breaking of bonds in long PTFE chains and the branching of the polymer structure. As a result, an increase in such properties as the wear resistance ratio, Wβ, is observed. In addition, sclerometric tests have shown that, with an in
APA, Harvard, Vancouver, ISO, and other styles
10

Egorov, M. S., V. N. Pustovoit, G. G. Tsordanidi, and R. V. Egorova. "Manufacturing Technology of Sliding Bearings from Ferro-Graphite Compositions." Safety of Technogenic and Natural System, no. 3 (August 17, 2022): 60–67. http://dx.doi.org/10.23947/2541-9129-2022-3-60-67.

Full text
Abstract:
Introduction. The development of modern technology imposes increasingly stringent requirements on materials operating under conditions of high pressures, speeds, deformations and aggressive media. The use of powder metallurgy methods in the creation of new materials makes it possible to provide a rational combination of production technology, structural and performance characteristics. Powder steels used in mechanical engineering are of great interest among the materials obtained by powder metallurgy. The article explores the possibility of manufacturing porous bearings made of iron powder for
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Structural Properties of Bronze Powder"

1

Karaagac, Hakan. "Electrical, Structural And Optical Properties Of Aggase2-xsx Thin Films Grown By Sintered Powder." Phd thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612362/index.pdf.

Full text
Abstract:
In the present study, the effect of S and Se substitution on structural, electrical and optical properties of AgGa(Se2-xSx) thin films has been investigated. AgGa(Se0.5S0.5 )2 thin films were prepared by using the thermal evaporation method. X-ray diffraction (XRD) analysis has revealed that the transformation from amorphous to polycrystalline structure took place at about 450 oC. The detailed information about the stoichometry and the segregation mechanisms of the constituent elements in the structure has been obtained by performing both energy dispersive X-ray analysis (EDXA) and X-ray photo
APA, Harvard, Vancouver, ISO, and other styles
2

Gardner, Jonathan. "Ferroelectricity in empty tetragonal tungsten bronzes." Thesis, University of St Andrews, 2017. http://hdl.handle.net/10023/10592.

Full text
Abstract:
In this work, in-depth structural and electrical characterisation is used to study a family of “empty” tetragonal tungsten bronzes (TTBs), A2₄A1₂B1₂B2₈O₃₀. An initial investigation into the effect of the A1-cation size on the properties of empty Ba₄R₀.₆₇◻₁.₃₃Nb₁₀O₃₀ TTBs (where R is the A1-cation and R = La, Nd, Sm, Gd, Dy and Y; ◻ = vacancy) was performed. These were determined to be metrically tetragonal by powder x-ray diffraction, with decreasing R cation size inducing increased crystal anisotropy. This tetragonal structural distortion, driven by contraction in the ab-plane, is shown to st
APA, Harvard, Vancouver, ISO, and other styles
3

Lopes, Fialho Tatiana. "Lactose hydrolyzed milk powder : optimization of the drying process and study of structural and functional properties." Thesis, Lille 1, 2019. http://www.theses.fr/2019LIL1R013/document.

Full text
Abstract:
La technologie de production du lait en poudre hydrolysé au lactose a été développée pour répondre aux besoins des consommateurs intolérants au lactose. Bien que le produit soit actuellement commercialisé dans certains pays, le secteur est confronté à des problèmes technologiques lors de la production et du stockage de la poudre, tels que l'agglomération, la prise en masse, le brunissement, une hygroscopicité élevée, un faible rendement de production et une perte de propriétés technofonctionnelles. Dans ce contexte, deux objectifs principaux ont été assignés aux travaux de cette thèse: (i) opt
APA, Harvard, Vancouver, ISO, and other styles
4

Lopes, Fialho Tatiana. "Lactose hydrolyzed milk powder : optimization of the drying process and study of structural and functional properties." Electronic Thesis or Diss., Université de Lille (2018-2021), 2019. http://www.theses.fr/2019LILUR013.

Full text
Abstract:
La technologie de production du lait en poudre hydrolysé au lactose a été développée pour répondre aux besoins des consommateurs intolérants au lactose. Bien que le produit soit actuellement commercialisé dans certains pays, le secteur est confronté à des problèmes technologiques lors de la production et du stockage de la poudre, tels que l'agglomération, la prise en masse, le brunissement, une hygroscopicité élevée, un faible rendement de production et une perte de propriétés technofonctionnelles. Dans ce contexte, deux objectifs principaux ont été assignés aux travaux de cette thèse: (i) opt
APA, Harvard, Vancouver, ISO, and other styles
5

Mowat, John P. S. "Synthesis, characterisation and adsorption properties of metal-organic frameworks and the structural response to functionalisation and temperature." Thesis, University of St Andrews, 2012. http://hdl.handle.net/10023/3195.

Full text
Abstract:
The synthesis of a scandium aluminium methylphosphonate ScAl₃(CH₃PO₃)₆ isostructural to the aluminium methylphosphonate AlMePO-α and with permanent microporosity is reported here for the first time. Structural characterisation of three lanthanide bisphosphonate structures (I,II,III) with the light lanthanides and N,N'-piperazine bis-(methylenephosphonic acid) and its 2-methyl and 2,5-dimethyl derivatives is described. The framework of structure type I shows considerable flexibility upon dehydration with a symmetry change from C2/c, a = 23.5864(2) Å, b = 12.1186(2) Å, c = 5.6613(2) Å, β = 93
APA, Harvard, Vancouver, ISO, and other styles
6

Paolella, Maurizio. "Correlations between structural and magnetic properties in powder and bulk Mg(B1-xCx)2 prepared using carbon chemical vapour doped boron and silica coated boron." Thesis, University of Southampton, 2015. https://eprints.soton.ac.uk/397082/.

Full text
Abstract:
The research project has been focused on the preparation and characterization of Mg(b1-xCx)2 powder and bulk samples using chemical vapour coated boron and silica coated boron by sol-gel method. The chemical vapour deposition of carbon on boron powder was achieved by reacting ethylene gas on high purity nano-sized boron particles (20-100nm diameter) with varying deposition temperatures and partial pressures. Undoped and carbon doped boron was then reacted with magnesium rod to produce both Mg(b1-xCx)2 powder and bulk samples. Transmission electron microscopy showed that the chemical vapour dep
APA, Harvard, Vancouver, ISO, and other styles
7

Kifune, Koichi, Miho Fujita, Mitsuru Sano, Motoharu Saitoh, and Koh Takahashi. "Electrochemical and Structural Properties of a 4.7 V-Class LiNi0.5Mn1.5 O 4 Positive Electrode Material Prepared with a Self-Reaction Method." The Electrochemical Society, 2004. http://hdl.handle.net/2237/18424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Genisel, Mustafa Fatih. "Synthesis Of Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn Sulfides By Solid-gas Reactions, Investigation Of Structural And Conducting Properties." Master's thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/12606746/index.pdf.

Full text
Abstract:
In this study some of the first row transition metal oxides were transformed to metal sulfides by new solid gas reaction system. Transition metal sulfides have wide application area in industry and technology. Several techniques are known for the production of metal sulfides. Such as reactions between metal or metal oxide with H2S, precipitation in several liquid medium, reaction between metal and sulfur in closed vessel, chemical vapor deposition (CVD) technique. These techniques will have some disadvantages<br>for example, reactants are rarely available or expensive materials, their product
APA, Harvard, Vancouver, ISO, and other styles
9

Lima, Alan Rogério Ferreira. "Efeito de metais de transição sobre a polarização espontânea na estrutura cristalina de nanopós da família tungstênio bronze." UNIVERSIDADE ESTADUAL DE PONTA GROSSA, 2011. http://tede2.uepg.br/jspui/handle/prefix/2091.

Full text
Abstract:
Made available in DSpace on 2017-07-24T19:38:04Z (GMT). No. of bitstreams: 1 Alan Rogerio Ferreira Lima.pdf: 4210754 bytes, checksum: 82a7a7898a00633ad3aa474df848f207 (MD5) Previous issue date: 2011-02-28<br>This work aimed the study of the effect of transition metals (Ni, Fe, Co) on the spontaneous polarization of the ferroelectric oxides of tetragonal tungsten bronze (TTB)-type structure of potassium strontium niobate (KSr2Nb5O15) and of the KSr2(FeNb4)O15-d, KSr2(NiNb4)O15-d and KSr2(CoNb4)O15-d solid solutions. All systems investigated were prepared by mechanical mixture of oxide/carbona
APA, Harvard, Vancouver, ISO, and other styles
10

Chang, Chao Chih, and 張詔智. "On the electric magnetic and structural properties of Germanium doped Sodium Tungsten bronze." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/07830234902792010573.

Full text
Abstract:
碩士<br>淡江大學<br>物理學系<br>91<br>Tungsten bronze wire single crystal and cubic crystal were attained through changing germanium concentration, the wires grew on the surface and the cubic crystals were inside the bulk. The crystalline structure of cubic crystal is cubic, the same as that of Na0.73WO3, the crystalline structure of wire is orthorhombic, the same as that of WO2.625 . The weak resistivity transition at 13K was observed for bulk Na0.25GexWO3 with germanium concentration ranging x from 0.05 to 0.09, but this transition were not observed for the cubic crystal and the wire. The resistivity
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Structural Properties of Bronze Powder"

1

Zavalij, Peter, and Vitalij Pecharsky. Fundamentals of Powder Diffraction and Structural Characterization of Materials. Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zavalij, Peter, and Vitalij Pecharsky. Fundamentals of Powder Diffraction and Structural Characterization of Materials, 2nd Ed. Springer, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Deformation and fracture in structural PM materials: Proceedings of the international conference held in the Hotel Academia, the High Tatras, Slovakia, October 13-16, 1996. Institute of Materials Research of the Slovak Academy of Sciences, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Boothroyd, Andrew T. Principles of Neutron Scattering from Condensed Matter. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198862314.001.0001.

Full text
Abstract:
The book contains a comprehensive account of the theory and application of neutron scattering for the study of the structure and dynamics of condensed matter. All the principal experimental techniques available at national and international neutron scattering facilities are covered. The formal theory is presented, and used to show how neutron scattering measurements give direct access to a variety of correlation and response functions which characterize the equilibrium properties of bulk matter. The determination of atomic arrangements and magnetic structures by neutron diffraction and neutron
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Structural Properties of Bronze Powder"

1

Dullien, Francis A. L. "Structural Properties of Packings of Particles." In Handbook of Powder Science & Technology. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6373-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Serov, Mikhail Mikhailovich. "Powder Metallurgy." In Structural Properties of Porous Materials and Powders Used in Different Fields of Science and Technology. Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6377-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sprengel, M., A. Baca, J. Gumpinger, et al. "Fatigue Properties of Powder Bed Fused Inconel 718 in As-Built Surface Condition." In Structural Integrity. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13980-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Artioli, Gilberto. "In Situ Structural and Kinetic Powder Diffraction Studies of Aluminosilicates." In Microscopic Properties and Processes in Minerals. Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4465-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Park, Geun Woo, and Hyuck Sang Kwon. "Structural and Mechanical Properties of Multilayered CVD TiC/TiCN Coatings with Variations of Multilayer Period." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Meier, Benjamin, Fernando Warchomicka, Reinhard Kaindl, Christoph Sommitsch, and Wolfgang Waldhauser. "Influence of Different Surface- and Heat Treatments; Elevated Temperature, Orientation on the Fatigue Properties of Ti6Al4V Processed by L-PBF for Controlled Powder Properties." In Structural Integrity. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-97822-8_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Simões, A. Z., V. Bouquet, F. Moura, A. Ries, M. A. Zaghete, and José Arana Varela. "Influence of Mg on the Structural and Optical Properties of LiNbO3 Thin Films Grown by Polymeric Precursor Method." In Advanced Powder Technology IV. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-984-9.342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Geffroy, Pierre Marie, and Jean François Silvain. "Structural and Thermal Properties of Hot Pressed Cu/C Matrix Composites Materials Used for the Thermal Management of High Power Electronic Devices." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.1505.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ahmad Shukeri, Nur Hasnidah, Syed Nuzul Fadzli Syed Adam, Hasmaliza Mohamad, and Heah Cheng Yong. "Effect of Annealing Process on the Structural Properties of Perlis Dolomite Powder." In Springer Proceedings in Physics. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-2871-1_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hong, Seong Min, Cheol Gi Kim, and Chong Oh Kim. "Magnetic and Structural Properties of Nitrified FINEMET Powder Using by Mechanical Milling Method." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.1313.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Structural Properties of Bronze Powder"

1

Krebs, S., F. Gärtner, and T. Klassen. "Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments." In ITSC 2014, edited by R. S. Lima, A. Agarwal, M. M. Hyland, et al. DVS Media GmbH, 2014. http://dx.doi.org/10.31399/asm.cp.itsc2014p0059.

Full text
Abstract:
Abstract The present study investigates the microstructure and properties of cold spray coatings produced from gas-atomized CuAl10Fe5Ni5 powders. To obtain information relevant to ship rudder cavitation-erosion performance, GL-A shipbuilding steel, equivalent to S235, was chosen as the substrate material. Thick Cu-Al-bronze coatings were deposited on grit-blasted plates using a wide range of parameter sets with different powder treatments, nozzle geometries, gas and substrate temperatures, and particle impact conditions. Coating samples were examined via SEM and XRD analysis, cavitation tests
APA, Harvard, Vancouver, ISO, and other styles
2

Uzawa, Kiyoshi, Kazuro Kageyama, Hideaki Murayama, et al. "Study of the Characteristic and Possibility for Applying Composite Materials to the Blades of Tidal Power Generation." In ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/omae2008-57738.

Full text
Abstract:
Recently, several power plants from the rotation of turbine with tidal current have been tried. Since the density of seawater is 800 times as much as that of the air, the loading of water on a turbine strictly requires much more strength and stiffness of blade compared with the wind turbine. Neither wind turbine nor standard hydroelectric dam turbines can simply be submerged into an ocean current. There are some formidable technical challenges to be overcome compared with the wind turbine. Key issues are cost effectiveness, structural integrity and workability in access and installation. The m
APA, Harvard, Vancouver, ISO, and other styles
3

Dhruv, Preksha N., Neha P. Solanki, and Rajshree B. Jotania. "Structural properties of delafossite multiferroic CuFeO2 powder." In FUNCTIONAL OXIDES AND NANOMATERIALS: Proceedings of the International Conference on Functional Oxides and Nanomaterials. Author(s), 2017. http://dx.doi.org/10.1063/1.4982089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Padhee, R., P. R. Das, B. N. Parida, and R. N. P. Choudhary. "Structural and dielectric properties of a complex tungsten bronze ferroelectric." In FUNCTIONAL MATERIALS: Proceedings of the International Workshop on Functional Materials (IWFM-2011). AIP, 2012. http://dx.doi.org/10.1063/1.4736911.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Goryu, Akihiro, Mitsuaki Kato, Akira Kano, Satoshi Izumi, and Kenji Hirohata. "Evaluation Method for Mechanical Stress Dependence of the Electrical Characteristics of SiC MOSFET for Electro-Thermal-Structural Coupled Analysis." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72027.

Full text
Abstract:
Power semiconductor devices such as MOSFET/IGBT and PiN diodes are widely used as basic components for supporting infrastructure in the field of electronics, including in power conversion, industrial equipment, railways, and automobiles. Recently, increasing attention has been paid to silicon carbide (SiC) as a wide-band-gap semiconductor suitable for use in power devices with low loss and high breakdown voltage. However, basic knowledge of the material properties and reliability of SiC devices, and particularly the influence of mechanical stress on device characteristics, is still incomplete.
APA, Harvard, Vancouver, ISO, and other styles
6

Yoshitake, Isamu, Yuya Tokikuni, Hiroki Komure, and Sunao Fukumoto. "Strength Properties Of Fly-Ash Concrete Mixed With Limestone Powder." In The Seventh International Structural Engineering and Construction Conference. Research Publishing Services, 2013. http://dx.doi.org/10.3850/978-981-07-5354-2_m-4-36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kumar, V. Senthil, R. Kanishkka, K. Kesavan, et al. "Influence of aluminium powder in mechanical properties of cement mortar." In INNOVATIONS IN THERMAL, MANUFACTURING, STRUCTURAL AND ENVIRONMENTAL ENGINEERING: ICITMSEE’24. AIP Publishing, 2025. https://doi.org/10.1063/5.0265113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Oliver, J. R., R. R. Neurgaonkar, and G. L. Shoop. "Structural and Ferroelectric Properties of Morphotropic Phase Boundary Systems in the Tungsten Bronze Family." In Sixth IEEE International Symposium on Applications of Ferroelectrics. IEEE, 1986. http://dx.doi.org/10.1109/isaf.1986.201188.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tekin, Tugce, Sohret Melda Aydin, Yasemin Yahsi, Semih R. Ferik, and Rasim Ipek. "Mechanical And Micro-structural Properties Of Mechanically Alloyed Mgal Sintered Cith Electric Field Technique." In World Powder Metallurgy 2022 Congress & Exhibition. EPMA, 2022. http://dx.doi.org/10.59499/wp225364568.

Full text
Abstract:
In this study, high-strength aluminium-magnesium alloys were prepared by AC- electric field technique (FAST) using powder metallurgy. Effects of sintering temperature on the Al-Mg microstructure and mechanical properties were investigated. Results from microstructural observations indicate that the density decreases with the increase in the sintering temperature; also, the maximum compressive strength and hardness values increased. The sample of Mg22Al at 300 ∘C under a pressure of 30 MPa reached nearly full density (≈0.99 ρt), it has 510,4 MPa compression strength and 167,90 HV30 hardness val
APA, Harvard, Vancouver, ISO, and other styles
10

Schneider, Paul, Christophe Szabo, and Karin Ljung. "Mechanical Properties Of Astaloy®CrS, A Lean Cr-alloyed Base Powder, After Sinterhardening." In Euro Powder Metallurgy 2024 Congress & Exhibition. EPMA, 2024. http://dx.doi.org/10.59499/ep246281794.

Full text
Abstract:
Sinterhardening is a commonly applied cost-effective process for producing higher loaded structural P/M parts. Generally, a prealloyed base powder is combined with further external alloying elements such as Ni or Cu in order to maintain the compressibility of the base powder. Astaloy® CrS is a newly developed low alloyed base powder prealloyed with 0,85% Cr and 0,15%Mo. This paper is investigating the mechanical properties after sinterhardening of various graphite and Ni additions admixed to Astaloy® CrS.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Structural Properties of Bronze Powder"

1

TESTING OF ADDITIVELY MANUFACTURED STAINLESS STEEL MATERIAL AND CROSS-SECTIONS. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.175.

Full text
Abstract:
Powder bed fusion (PBF) additive manufacturing has the potential for significant impact on the construction industry due to its ability to produce complex and free-form components with high-precision. However, the size of components is limited by the build envelope of PBF machines. Laser welding offers a means of joining small individual PBF parts together to create larger-scale parts. This paper investigates the microstructure and material properties of stainless steel coupons with and without laser-welded joints, in conjunction with the structural performance of stainless steel circular holl
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Structural Properties of Bronze Powder' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography