Log in

Relevant bibliographies by topics / Stuffing box packing / Journal articles

To see the other types of publications on this topic, follow the link: Stuffing box packing.

Journal articles on the topic 'Stuffing box packing'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 23 journal articles for your research on the topic 'Stuffing box packing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Shevchenko, Serhii S. "Physical Model and Calculation of Face Packing Seals." Journal of Mechanical Engineering 23, no. 4 (2020): 45–51. http://dx.doi.org/10.15407/pmach2020.04.045.

Full text

Abstract:

Increasing the reliability and service life of dynamic-pump shaft seals is the most important requirement for their creation. The most common type of seals is still traditional stuffing box seals, which are controlled leakage assemblies that are periodically restored during operation. A radical change in the design of standard stuffing box seals is the transition to face packing seals with a constant pressure against the packing. It is shown that face packing seals can successfully combine the advantages of mechanical face seals and the simplicity and relatively low cost of traditional stuffin

APA, Harvard, Vancouver, ISO, and other styles

2

Mohd Zainal, Mohd Zafuan, Mohd Yusri Mohd Yunus, Aaina Syakirah Nor Azizan, and Nurul Ain Ismail. "The Effect of Size and Material of Packing Seal and Pump Flow Rate to Leakage Rate at Stuffing Box of Centrifugal Pump." International Journal of Engineering Technology and Sciences 6, no. 2 (2020): 101–14. http://dx.doi.org/10.15282/ijets.6.2.2019.1010.

Full text

Abstract:

This research explore on the effect of size and material of packing seal and discharge valve opening to the leakage rate at stuffing box for pump P7301-A. Leak at stuffing box is unavoidable due to gap exists between the pump casing and shaft. Therefore, it is necessary for a suitable sealing system which includes packing size and material to be installed on all pumps for controlling the leakage rate without damaging the pumps. It is also important for operator to know the proper discharge valve opening at which the pump should be operated to get minimum leakage. Experiment was conducted by re

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Xiao Hui, Yi Liang Zhang, and Xue Dong Xu. "Failure Analysis of the Stuffing Box in a Super High Pressure Compressor." Advanced Materials Research 415-417 (December 2011): 2226–30. http://dx.doi.org/10.4028/www.scientific.net/amr.415-417.2226.

Full text

Abstract:

In this paper, theoretical and experimental researches were done to find the repeated cracking reason of stuffing box in a super hyper pressure compressor. The mathematical expression of the assembly pressure was deduced in interference fit. From macro and micro perspectives, residual stresses were measured by X-ray diffraction in typical position of stuffing box when the packing box in combination and separation states. Besides, metallography and fracture examinations were carried out. The results showed that the real magnitude of shrink range of the failed stuffing box was only account for 1

APA, Harvard, Vancouver, ISO, and other styles

4

Sapozhnykov, Y. I., and A. V. Zahorulko. "Computational studies of stuffing box packing seal wear mechanism using the Archard model." Problems of Tribology 29, no. 2/112 (2024): 6–15. http://dx.doi.org/10.31891/2079-1372-2024-112-2-6-15.

Full text

Abstract:

The wear model of the stuffing box packing seal, particularly the surface of the protective sleeve of the shaft, is presented. Modeling was performed using the ANSYS software, using the Transient Structural module which have the built-in Archard wear model. The wear model was validated in accordance with the results of previous experimental studies considering the effect of applied pressure. It was determined that when the degree indicators in the Archard equations are m = 1.5 and n = 1.3, the proposed wear model allows obtaining sufficiently accurate wear intensity values. The values of relat

APA, Harvard, Vancouver, ISO, and other styles

5

Sapozhnykov, Y., A. Zahorulko, and G. Peczkis. "Numerical Simulation of 2-Way FSI Problem of Face Packing Seal: Impact of Parameters Change." Journal of Engineering Sciences 9, no. 2 (2022): E12—E27. http://dx.doi.org/10.21272/jes.2022.9(2).e3.

Full text

Abstract:

The article is devoted to creating a refined computer model of the face packing seal (FPS) based on the solution of the two-way fluid-structure interaction (2-way FSI) problem. An approach to the average gap was proposed based on the micro-space’s working medium leakage between the friction pair’s roughness elements. Three FPS designs were studied, in which the following operating parameters were alternately changed: inlet pressure, load factor, stuffing box parameters, and friction coefficient. Young’s modulus, Poisson’s ratio, and the thickness of the annular plate at the bottom of the stuff

APA, Harvard, Vancouver, ISO, and other styles

6

Diany, Mohammed, and Abdel-Hakim Bouzid. "Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis." Tribology International 42, no. 6 (2009): 980–86. http://dx.doi.org/10.1016/j.triboint.2009.02.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

TASHIRO, Hisao, and Fusahito YOSHIDA. "Analysis of axial and radial stress distribution in packing in stuffing-box seals taking account of stress relaxation." JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry 33, no. 4 (1990): 597–602. http://dx.doi.org/10.1299/jsmec1988.33.597.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tahir Suleymanov, Tahir Suleymanov, Suleyman Efendi Suleyman Efendi, and Aybeniz Amirova Aybeniz Amirova. "IMPROVEMENT OF OPERATING CAPACITY OF OIL PRODUCTION EQUIPMENT CONSIDERING THE INFLUENCE OF DYNAMIC LOADS." ETM - Equipment, Technologies, Materials 14, no. 02 (2023): 84–92. http://dx.doi.org/10.36962/etm14022023-84.

Full text

Abstract:

In the presented article, the analysis of the effect of the dynamic load falling on the polished rod of the sucker rod pump unit on the normal function of the operating unit during the oil extraction process was carried out. The general formula for the damage caused by the impact of the pump's wellhead packing seal has been derived. The dependence graph of damaged work on the length of the packing seal and the Poisson's ratio of the material was made. Due to the dynamics of the frictional force generated in the packing seal of the stuffing box appropriately located below the suspension point o

APA, Harvard, Vancouver, ISO, and other styles

9

Jakfar, Husni Husin, Muhammad Zaki, et al. "Optimization Study of CO2 Gas Absorption with NaOH Absorbent Continuous System in Raschig Ring Packing Column Using Box–Behnken Design." Inventions 8, no. 3 (2023): 70. http://dx.doi.org/10.3390/inventions8030070.

Full text

Abstract:

Increasing CO2 gas emissions results in climate change by increasing air temperature and worsening environmental problems. It is necessary to control CO2 gas in the air to overcome this. This research aims to optimize the absorption of CO2 gas in the air with 0.1 M NaOH absorbent in the tower of the Raschig ring stuffing material using the response surface methodology (RSM). This research was conducted using a continuous system of three independent variables by varying the contact time (10–80 min), the flow rate of NaOH absorbent (2–5 L/min), and the flow rate of CO2 gas (1–5 L/min). The respo

APA, Harvard, Vancouver, ISO, and other styles

10

Emzain, Zakki Fuadi, Zean Galang Wardhana, Satworo Adiwidodo, Siti Duratun Nasiqiati Rosady, Prasetyo Prasetyo, and Muhammad Andi Nova. "Implementation of Failure Mode and Effect Analysis (FMEA) for centrifugal pump maintenance in water supply distribution system." Jurnal Polimesin 22, no. 3 (2024): 295. http://dx.doi.org/10.30811/jpl.v22i3.4739.

Full text

Abstract:

A centrifugal pump is an essential mechanical device in the Regional Drinking Water Company (PDAM) to distribute sterile water from the reservoir to local community houses by flowing the fluid through the pipeline. However, improper and inadequate maintenance of centrifugal pumps can result in component damage, including bearings that are broken, ripped, or damaged mechanical seals. Therefore, for the water supply to continue smoothly, proper maintenance needs to be carried out so that the engine's performance will be maintained and last longer. This study aims to conduct a maintenance analysi

APA, Harvard, Vancouver, ISO, and other styles

11

Tarigan, Rehulina, Ely Nuryani, Susy Katarina Sianturi, Nur Hidayanti, and Widyawati Widyawati. "Migrasi Data Hasil Optimalisasi Pemuatan Kontainer Pada Legacy System ke SAP untuk Mempercepat Pembuatan Surat Jalan dengan Batch Data Communication (BDC)." Jurnal Teknologi Informasi dan Ilmu Komputer 11, no. 6 (2024): 1213–22. https://doi.org/10.25126/jtiik.1167365.

Full text

Abstract:

Modul SAP yang diimplementasi di PT. Indah Kiat Pulp & Paper, tidak mempunyai sistem untuk optimalisasi pemuatan order ke kontainer. Sebelum implementasi SAP, proses memasukkan data order, optimalisasi pemuatan data order ke kontainer dan pembuatan surat jalan dilakukan semuanya pada sistem CSO (Container Stuffing Optimization), sehingga data order pasti sinkron dengan data surat jalan atau sesuai dengan aktual pengiriman. Setelah implementasi SAP, data order untuk optimalisasi pemuatan kontainer dimasukkan pada CSO (legacy system) sedangkan proses pembuatan surat jalan dilakukan pada SAP.

APA, Harvard, Vancouver, ISO, and other styles

12

Tarigan, Rehulina, Ely Nuryani, Susy Katarina Sianturi, Nur Hidayanti, and Widyawati Widyawati. "Migrasi Data Hasil Optimalisasi Pemuatan Kontainer Pada Legacy System ke SAP untuk Mempercepat Pembuatan Surat Jalan dengan Batch Data Communication (BDC)." Jurnal Teknologi Informasi dan Ilmu Komputer 11, no. 6 (2024): 1213–22. https://doi.org/10.25126/jtiik.2024117365.

Full text

Abstract:

Modul SAP yang diimplementasi di PT. Indah Kiat Pulp & Paper, tidak mempunyai sistem untuk optimalisasi pemuatan order ke kontainer. Sebelum implementasi SAP, proses memasukkan data order, optimalisasi pemuatan data order ke kontainer dan pembuatan surat jalan dilakukan semuanya pada sistem CSO (Container Stuffing Optimization), sehingga data order pasti sinkron dengan data surat jalan atau sesuai dengan aktual pengiriman. Setelah implementasi SAP, data order untuk optimalisasi pemuatan kontainer dimasukkan pada CSO (legacy system) sedangkan proses pembuatan surat jalan dilakukan pada SAP.

APA, Harvard, Vancouver, ISO, and other styles

13

Zahorulko, A., C. Kundera, and S. Hudkov. "Determination of mechanical characteristics of stuffing box packings." IOP Conference Series: Materials Science and Engineering 233 (August 2017): 012039. http://dx.doi.org/10.1088/1757-899x/233/1/012039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Zahorulko, Andriy. "Experimental investigation of mechanical properties of stuffing box packings." Sealing Technology 2015, no. 8 (2015): 7–13. http://dx.doi.org/10.1016/s1350-4789(15)30244-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Burya, A. I., M. E. Kazakov, A. A. Burya, et al. "Effect of ceresine on the properties of carbon fibre stuffing box packings." Fibre Chemistry 31, no. 3 (1999): 225–30. http://dx.doi.org/10.1007/bf02361011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Kazeminia, Mehdi, and Abdel-Hakim Bouzid. "Stress Analysis of Packed Stuffing-Boxes." Journal of Pressure Vessel Technology 137, no. 5 (2015). http://dx.doi.org/10.1115/1.4029524.

Full text

Abstract:

Packed stuffing-boxes are mechanical sealing systems that are extensively used in pressurized equipment such as valves and pumps. Yet there is no standard design procedure in use to verify their mechanical integrity and leak tightness. It is only recently that standard test procedures to qualify packing materials have been suggested for adoption in both North America and Europe. Nonetheless the assessment of the structural integrity of the housing requires a well-documented design procedure to insure safe use of packed stuffing-boxes. While the packing contact stress with the side walls is pre

APA, Harvard, Vancouver, ISO, and other styles

17

Diany, Mohammed, and Abdel-Hakim Bouzid. "Creep Constitutive Law of Packing Materials Based on Relaxation Tests." Journal of Tribology 134, no. 1 (2012). http://dx.doi.org/10.1115/1.4005773.

Full text

Abstract:

The tightness of valves, compressors and pumps is ensured by superposed braided rings installed in a stuffing-box system. The nature of the packing material and structure, which is like a rectangular braided cord, influences the proper stuffing-box assembly behavior. During installation, a minimum compressive load is required to ensure a minimum level of tightness. A fairly large percentage of this axial compression load is transferred to the radial direction to generate the contact pressures at the packing-stem and packing-housing interfaces necessary for sealing.The packing is considered in

APA, Harvard, Vancouver, ISO, and other styles

18

Diany, Mohammed, and Abdel-Hakim Bouzid. "An Experimental-Numerical Procedure for Stuffing Box Packing Characterization and Leak Tests." Journal of Tribology 133, no. 1 (2010). http://dx.doi.org/10.1115/1.4002929.

Full text

Abstract:

The sealing of valve stems is ensured by the traditional systems of packed stuffing boxes. The performance of this type of sealing system, which is also used in rotating equipment, is dependent on the radial contact pressures generated by the packing axial compression. The mechanical behavior of a packing seal is characterized by the transmission ratio of the radial stress over the axial stress known as the lateral pressure coefficient, which is one of the required parameters used to select packing seals. However, the modeling of the packed stuffing box requires the knowledge of other packing

APA, Harvard, Vancouver, ISO, and other styles

19

BAHOUM, Kaoutar. "Finite element analysis of stuffing-box packing subjected to thermo-mechanical loads." Journal of Mechanical Engineering Research 1, no. 1 (2018). http://dx.doi.org/10.30564/jmer.v1i1.139.

Full text

Abstract:

The principal rule for the stuffing-box packings is to ensure the stem valve sealing. The behavior of these systems is affected by the operating conditions, which are the gland axial stress, the temperature, and the fluid pressure, as well as the mechanical and geometrical properties of the various components. In this paper, a numerical study using finite element method is presented to evaluate the radial contact stresses, the axial stresses, and the lateral pressure coefficients in a stuffing box system under the tightening gland load and the temperature field.

APA, Harvard, Vancouver, ISO, and other styles

20

Diany, Mohammed, and Abdel-Hakim Bouzid. "Short Term Relaxation Modeling of Valve Stem Packings." Journal of Tribology 131, no. 3 (2009). http://dx.doi.org/10.1115/1.3118787.

Full text

Abstract:

The long term tightness performance of stuffing-box packings, used in valves, is conditioned by the capacity of its sealing material to maintain a contact pressure to a predetermined minimal threshold value. Due to the creep, this contact pressure decreases with time depending on the creep properties and the stiffness of the housing. Assessing relaxation is a key parameter in determining the tightness performance of a valve stem packing over time. An analytical model based on the packing viscoelastic behavior is developed to assess the contact pressures between the packing material and the ste

APA, Harvard, Vancouver, ISO, and other styles

21

"Stuffing box seal having braided packings…" Sealing Technology 1997, no. 44 (1997): 15. http://dx.doi.org/10.1016/s1350-4789(97)87107-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

"Effect of ceresine on the properties of carbon fibre stuffing box packings." Fibre Chemistry 31, no. 6 (1999): 500. http://dx.doi.org/10.1007/bf02358271.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Packers, and Movers Kolkata. "Wondering How You Can Safely Move Gym Equipment? Check Out This." August 30, 2021. https://doi.org/10.5281/zenodo.5336512.

Full text

Abstract:

Moving is not a load but the things you wanna move are, because if anything happens to your possession during the move you can't settle easily and when it comes to tough moving goods gym equipment falls in it whether it is as simple as yoga mat or as complicated as treadmill, you have to put a care on how to move them safely without hurting them as well as the property. There is right as well as wrong way to move your gym partners and today <strong>Packers and Movers in Kolkata</strong> will tell you how you can ace it and have a successful move. <strong>First comes first: cleani

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!