Relevant bibliographies by topics / Sub-grade/filling

Contents

  1. Journal articles
  2. Conference papers

Academic literature on the topic 'Sub-grade/filling'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Sub-grade/filling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Sub-grade/filling"

1

G.I, Obiefuna, Oreagbune M.O., and David C. "GEOTECHNICAL EVALUATION OF SOILS IN NUMAN AND ITS ENVIRONS, NORTH EAST NIGERIA." Continental J. Earth Sciences 5, no. 1 (2017): 20–31. https://doi.org/10.5281/zenodo.833382.

Full text
Abstract:
A geotechnical evaluation of some soils in Numan, Adamawa, North –East, Nigeria has been carried out. This was done to determine the suitability of the soils for use as sub-grade/filling, sub-base and base course materials for road construction. The samples were collected from five different areas, at surface and sub-surface levels. The areas are New Demsa, Farei, Dowaya, Numan Town and Imbru. The soil samples were subjected to laboratory investigations in conformity with the American Association of State Highway and Transportation (AASHTO) and the Bristish Standard Institution (BSI) Standard
APA, Harvard, Vancouver, ISO, and other styles
2

Song, Rong Fang, and Dai Wang. "Application Study of Impact Compaction Technology in Wetness and Softness Loess Roadbed Treatment." Advanced Materials Research 594-597 (November 2012): 1477–81. http://dx.doi.org/10.4028/www.scientific.net/amr.594-597.1477.

Full text
Abstract:
In order to study the applicability and strengthening effect of impact compaction technology in wetness and softness loess roadbed treatment, impact compaction technology was applied in ground treatment and layered filling roadbed compact of a freeway sub-grade construction, and compactness and settlement of the soil were also measured. Test results suggest: impact compaction technology can effectively apply to shallow wetness and softness loess roadbed treatment and the most effective depth is about 80cm, and this effect appears to increase with the impact compaction times and 30 impact compa
APA, Harvard, Vancouver, ISO, and other styles
3

Sinelnikov, Yu S., E. N. Orekhova, O. A. Osetrova, and O. A. Balyshova. "Echocardiographic assessment of right ventricle diastolic function in patients with multivessel coronary artery disease." Patologiya krovoobrashcheniya i kardiokhirurgiya 21, no. 2 (2017): 68. http://dx.doi.org/10.21688/1681-3472-2017-2-68-76.

Full text
Abstract:
<p><strong>Aim.</strong> The study was aimed at assessing the right ventricle diastolic function in patients with multivessel coronary artery disease.</p><p><strong>Methods.</strong> 62 patients (32 males (51.6 %)) with multivessel coronary artery disease (SYNTAX Score 33.04±4.1) were examined over a period from 2014 to 2016. The mean age was 58.5±8.3 years). To examine the diastolic function of the left and right ventricles (LV, RV), conventional echocardiographic (EchoCG) parameters, as well as a longitudinal diastolic strain rate at the level of RV
APA, Harvard, Vancouver, ISO, and other styles
4

Zeng, Yu-ping. "Geotechnical Settlement Deformation Analysis of Soft Sub-grade Embankment Filling Construction Period Based on Unified Hardening Model." Geotechnical and Geological Engineering 37, no. 6 (2019): 5473–83. http://dx.doi.org/10.1007/s10706-019-00993-z.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Daspan, R. I., and L.O Imagbe. "PRELIMINARY INVESTIGATION OF THE ORIGIN AND QUALITY OF BARYTES IN THE TSARETA-TUNGAN KUDAKU AREA, NORTH WESTERN NIGERIA BASEMENT COMPLEX, NIGERIA." Continental J. Earth Sciences 5, no. 1 (2010): 8–13. https://doi.org/10.5281/zenodo.833376.

Full text
Abstract:
A preliminary study of the baryte occurrence in the Tsareta-Tungan Kudaku area, Northwestern Nigeria shows that it is hosted by low- grade metamorphic rocks mainly Phyllites, in veins of about 1.5km wide and 4m deep. It is a fissure filling vein type deposited in fissures running parallel-sub parallel to the Anka fault system. The barytes has variable specific gravity ranging between 3.8 for surface occurrences and 4.3 at deeper levels. This quality meets the specification of specific gravity of 4.2 for use as drilling mud in the oil industry. Chemically, the baryte has BaSO<sub>4</sub> concen
APA, Harvard, Vancouver, ISO, and other styles
6

Adeyemi, E. Adetoro, and A. Oladapo Silas. "Analyses of some Engineering Properties of Isan Ekiti Soil, Southwestern Nigeria." International Journal of Trend in Scientific Research and Development 2, no. 6 (2019): 685–88. https://doi.org/10.31142/ijtsrd18570.

Full text
Abstract:
Today, all over the World, soil plays major role in Civil Engineering works or construction. Its thorough assessment is impossible if its Engineering properties were overlooked. The aim of this study is to analyze some Engineering properties of lateritic soil deposited in Isan - Ekiti, South western Nigeria. Soil samples collected from the study area were subjected to Atterberg Limits, CBR and Grain Size laboratory tests. It is observed that the LL, PL, PI, SL and CBR values varied from varied from 41.10 to 57.50 , 24.60 to 35.50 , 14.80 to 22.70 , 0.32 to 0.61 and 4.38 to 30.21 respectively f
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, Daud, Shih Huang Chen, and Hnin Hnin Mon. "The Preliminary Study on Re-Utilization of Ferrous-Nickel Slag to Replace Conventional Construction Material for Road Construction (Sub-Grade Layer Improvement)." Advanced Materials Research 723 (August 2013): 694–702. http://dx.doi.org/10.4028/www.scientific.net/amr.723.694.

Full text
Abstract:
Ferrous-nickel slag is an industrial waste material which produced from smelting process of ferrous-nickel uses in manufacturing of stainless steel and ferrous alloy industry, in China Guangdong province itself, it was estimated around 6-7million of ferrous-nickel slag has been produces annually, the common method in order to reutilize ferrous-nickel slag material is by using on cement industry (replace cement material) and as land-filling material. One of the main objectives of this study is to investigate the feasibility of reutilization of ferrous-nickel slag combined with soil improvement
APA, Harvard, Vancouver, ISO, and other styles
8

Sarfaraj, Ahmad*1 Alok Agrawal 2. "DEVELOPMENT OF NEURAL NETWORK AND FRAME WORK TO OPTIMIZE CUT LENGTH IN CONTINUOUS CASTING SHOP USING VARIOUS PARAMETERS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 7, no. 3 (2018): 592–99. https://doi.org/10.5281/zenodo.1206997.

Full text
Abstract:
Continuous casting of steel is a process in which liquid steel is continuously solidified into semi-finished or finished product. In continuous casting, one of the major operational irregularities encountered is wrong cutting of slab (long or short) and grade mix of two different steel during casting of slab which leads to productivity loss, capital loss, and safety hazards etc. In the present work, a neural network model is developed to track the tundish filling and casting speed. The model is fully transient and consists of three sub models, which account for mixing in the tundish, mixing in
APA, Harvard, Vancouver, ISO, and other styles
9

Ramadhani, Wella Sahrei, Darwel ., and Wijayantono . "PERBEDAAN PENGETAHUAN, SIKAP DAN KETERAMPILAN SEBELUM DAN SESUDAH PEMBENTUKAN SERDADU JENTIK DI SD NEGERI DALAM PENCEGAHAN DEMAM BERDARAH DENGUE." Jurnal Sehat Mandiri 13, no. 2 (2019): 71–80. http://dx.doi.org/10.33761/jsm.v13i2.80.

Full text
Abstract:
This research is quantitative and carried out using the research design of one group Pre test posttest. The research sample was 4th grade students who became small doctors in 7 elementary schools in Surau Gadang Village. Implementation of research November - December 2018. Primary data obtained directly from filling out the research questionnaire by sample. Based on these results it can be concluded that there are differences in knowledge, attitudes and skills before and after the formation of larvae soldiers in Public Elementary Schools in the Prevention of DHF Cases in Surau Gadang Sub-Distr
APA, Harvard, Vancouver, ISO, and other styles
10

Ahsan Abdullah and Meher Abdullah. "A novel application of dry-electrode EEG Device for knowledge discovery in emotional-behavioral disorder studies." International Journal of Frontiers in Life Science Research 3, no. 1 (2022): 001–8. http://dx.doi.org/10.53294/ijflsr.2022.3.1.0056.

Full text
Abstract:
As per World Health Organization (WHO), emotional and behavioral disorders affect 10.7% of global population. Studies have shown emotional-behavioral problems having significant positive correlation with obesity and overweight (P&lt;0.01). It has been established in published body of knowledge that obesity and overweight are negatively correlated with psychological comorbidities, emotional and behavioral disorders, and self-esteem. There is an increasing interest in studying the psychological and cognitive neuroscience aspects of obesity. Lately there has been an increase in the number and ava
APA, Harvard, Vancouver, ISO, and other styles
More sources

Conference papers on the topic "Sub-grade/filling"

1

Yoon, Sung-Hwan, Jun S. Lee, Ji-Sun Im, et al. "Effect of Tooling Surface Roughness in Micro-Injection Molding." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72093.

Full text
Abstract:
Quality of tooling surface has been considered as one of the important factors defining the injection molded part quality. Therefore, surface polishing has been an important and relatively expensive step in conventional mold making process. Although the poor surface quality impacts the product quality when molding macroscale parts, it becomes more significant with sub-micrometer features. Previous micro injection molding research result has indicated that rough tooling surface may cause polymer adhesion on the tooling surface. To evaluate the effect of roughness, optical grade polycarbonate wa
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Sub-grade/filling' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography