Relevant bibliographies by topics / Surface structure of paper

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Surface structure of paper'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Surface structure of paper.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Surface structure of paper"

1

Li, Q., S. Cheng, Z. Hou, W. Zhao, and Q. Guan. "Analysis of Sealing Performance and Mechanism of Biomimetic Superoleophobic Surface Structure." Journal of Applied Fluid Mechanics 18, no. 7 (2025): 1938–52. https://doi.org/10.47176/jafm.18.7.3144.

Full text
Abstract:
Sealing performance is critical for mechanical components, particularly in automotive engines, where oil leaks remain a persistent challenge. This paper presents the design of novel biomimetic sealing surfaces that replicate the structural characteristics of biological surfaces with superhydrophobic and superoleophobic properties. A comprehensive evaluation of the design and performance of these biomimetic surfaces is provided. A multilayer microarray structure was designed using multivariate coupled mimetic theory. The structure consists of a smooth surface, a primary biomimetic weave surface
APA, Harvard, Vancouver, ISO, and other styles
2

Nakanishi, Kazuo, Jun-ichiro Nitta, and Takashi Ito. "The Surface Layer Structure of the Coated Paper." JAPAN TAPPI JOURNAL 46, no. 10 (1992): 1285–94. http://dx.doi.org/10.2524/jtappij.46.1285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hu, Zhi Qing, Ji Zhao, and Zeng Ming Feng. "FEM-Based Analysis of Micro-Structure Parameters for Roll Forming on Aluminum Alloy Sheet." Materials Science Forum 762 (July 2013): 763–68. http://dx.doi.org/10.4028/www.scientific.net/msf.762.763.

Full text
Abstract:
Micro-structured surfaces with drag reduction, desorption, and excellent optical performance are widely used in the field of automotive, aerospace, marine applications. Therefore, the manufacturing of the micro-structure on the metal surface is of high impotance. Although the processing methods for micro-patterning of surfaces have progressed in recent years, micro-structure processing is still not used on large metal surfaces. In this paper, a method of roll forming micro-structure on the plate surface is proposed. A simulation model for micro-structure roll forming (MRF) was presented by usi
APA, Harvard, Vancouver, ISO, and other styles
4

Borštnik Bračić, Anamarija, Tobias Surmann, and Edvard Govekar. "Modeling and Characterization of Surface Structures Produced by Milling." Advanced Materials Research 223 (April 2011): 495–504. http://dx.doi.org/10.4028/www.scientific.net/amr.223.495.

Full text
Abstract:
In this paper, a novel method for the modeling and characterization of surface structures is presented. The method is based on the nonparametric statistical modeling of the surface structure, represented as a two dimensional field. Using a sample of a surface structure in question, the model reproduces the structure of the surface and estimates the corresponding machining parameters. The applicability of the method is demonstrated on the modeling and characterization of the functional surfaces generated by intentionally invoked chatter during the milling process. Based on the model of the gene
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Jingyang, Fujie Yin, and Yu Tian. "Biomimetic Structure and Surface for Grasping Tasks." Biomimetics 9, no. 3 (2024): 144. http://dx.doi.org/10.3390/biomimetics9030144.

Full text
Abstract:
Under water, on land, or in the air, creatures use a variety of grasping methods to hunt, avoid predators, or carry food. Numerous studies have been conducted to construct a bionic surface for grasping tasks. This paper reviews the typical biomimetic structures and surfaces (wedge-shaped surface, suction cup surface and thorn claw surface) for grasping scenarios. Initially, progress in gecko-inspired wedge-shaped adhesive surfaces is reviewed, encompassing the underlying mechanisms that involve tuning the contact area and peeling behavior. The applications of grippers utilizing this adhesive t
APA, Harvard, Vancouver, ISO, and other styles
6

Mikado, Hideyuki, Keiro Takigawa, Yukiko Suzuki, and Tetsuya Hirabayashi. "Effect of Surface Structure on Gloss of Coated Paper." JAPAN TAPPI JOURNAL 61, no. 8 (2007): 967–77. http://dx.doi.org/10.2524/jtappij.61.967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pussi, Katariina, and Renee D. Diehl. "LEED analysis of the surface structure of decagonal Al–Co–Ni using its W-approximant as a model structure." Zeitschrift für Kristallographie - Crystalline Materials 224, no. 1-2 (2009): 1–4. http://dx.doi.org/10.1524/zkri.2009.1060.

Full text
Abstract:
AbstractThe analysis of low-energy electron diffraction (LEED) intensities from quasicrystal surfaces requires the use of periodic model structures that contain the same structure features as the quasicrystal. In this paper, we present the analysis of LEED data from 10-fold decagonal Al–Co–Ni using the W approximant structure as the model. A preference was found for an Al-rich termination of the surface, with very little relaxation of the surface planes relative to the bulk structure. This result is similar to the results of an
APA, Harvard, Vancouver, ISO, and other styles
8

DING, You, Zhou ZHOU, Hongjun LIU, and Kelei WANG. "Designing bionic surface grid structure with base structure method." Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 40, no. 2 (2022): 271–80. http://dx.doi.org/10.1051/jnwpu/20224020271.

Full text
Abstract:
To improve the efficiency of the composite material wing structure of a solar-powered UAV, this paper proposed an efficient discrete structural topological optimization method based on the notion of bionic design. The method considers the features of such wing structures as discrete stiffness, high aspect ratio and ultralight. Through multi-step optimization, the grid relationship of the base structure method is established with the GRAND method, so as to obtain the design space of discrete topological optimization. First, linear programming is used to solve optimization problems and thus give
APA, Harvard, Vancouver, ISO, and other styles
9

Yao, Dong, Guangfeng Shi, Jingran Zhang, and Siwei Meng. "An investigation on the adhesion of dual-scale micro-nano composite structure on the surface of aluminum." Surface Topography: Metrology and Properties 11, no. 2 (2023): 025026. http://dx.doi.org/10.1088/2051-672x/acdb89.

Full text
Abstract:
Abstract Adhesion is a crucial characteristic of hydrophobic surfaces that significantly impacts their practical applications. This paper proposes an innovative method for preparing a dual-scale micro-nano composite structure surface by combining mechanical ruling and anodic oxidation, which demonstrates great potential in enhancing hydrophobic surface properties. Through the analysis of the influence of micro-groove depth on the adhesion of hydrophobic surfaces, it has been discovered that micro-groove dimensions can be used to control surface adhesion while maintaining hydrophobicity, withou
APA, Harvard, Vancouver, ISO, and other styles
10

Cho, Sung-Sil, and Ic-Pyo Hong. "Design of a paper-based reconfigurable frequency selective surface structure." IEICE Electronics Express 13, no. 16 (2016): 20160656. http://dx.doi.org/10.1587/elex.13.20160656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Surface structure of paper"

1

Fidjestøl, Svein. "Effective Quantification of the Paper Surface 3D Structure." Thesis, Norwegian University of Science and Technology, Department of Computer and Information Science, 2005. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9208.

Full text
Abstract:
<p>This thesis covers the topic of image processing in relation to the segmentation and analysis of pores protruding the surface in the three dimensional surface structure of paper. The successful analysis of pores is related to a greater goal of relating such an analysis to the perceived quality of the surface of a paper sample. The first part of the thesis gives an introduction to the context of image processing in relation to paper research. Also, an overview of the image processing framework used for image processing plugin development, ImageJ, is provided, together with the current statu
APA, Harvard, Vancouver, ISO, and other styles
2

Åvitsland, Grete A. "Edgewise liquid penetration in paper : influence of surface chemistry and paper structure /." Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Ruonan. "Surface properties and pore structure of superheated steam dried paper." Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=55414.

Full text
Abstract:
Effects of superheated steam drying were determined for surface properties and pore structure of paper, properties which are important in the end use of paper. Two furnishes were investigated, thermomechanical pulp (TMP) and a TMP/kraft pulp blend. Drying of handsheets under matched conditions in air was used as the basis of comparison.<br>TMP paper dried in superheated steam has a slightly higher surface roughness, by about 0.5 $ mu$m at a roughness around 8 $ mu$m. This difference decreases with drying fluid temperature. It is also reduced by about half after a very light blade coating. Surf
APA, Harvard, Vancouver, ISO, and other styles
4

Preston, Janet Susan. "The influence of coating structure on the print gloss of coated paper surfaces." Thesis, University of Bristol, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.393086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kamal, Alm Hajer. "Interfacial Adhesion Failure : Impact on print-coating surface defects." Doctoral thesis, KTH, Fiber- och polymerteknologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-194166.

Full text
Abstract:
The aim of this work was to develop a solid knowledge on formulation effects controlling offset ink-paper coating adhesion and to identify key factors of the coating and printing process affecting it. Focus lay on comprehending the impact of pigment dispersant on ink-paper coating adhesion and ultimately on the print quality of offset prints. The work covers laboratory studies, a pilot coating trial designed to produce coated material with a span in surface chemistry and structure, and an industrial offset printing trial. The lab scale studies quantified ink-paper coating adhesion failure duri
APA, Harvard, Vancouver, ISO, and other styles
6

Rehberger, Marcus. "Topographical micro-changes in corrugated board production : effects on flexographic post-print quality." Licentiate thesis, Stockholm : Department of Media Technology and Graphic Arts, School of Computer Science and Communication, Royal Institute of Technology, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4583.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Barros, Fabien de. "Conception, Réalisation et Caractérisation de papiers fonctionnels pour des applications de filtrage électromagnétique." Thesis, Grenoble, 2011. http://www.theses.fr/2011GRENT118/document.

Full text
Abstract:
Le brouillard électromagnétique dans lequel nous vivons en permanence estaujourd’hui montré du doigt car, outre les risques sanitaires qu’il pourrait engendrer, illimite l’usage de certaines technologies. L’importance des interférences entre réseauxsans fil, ou la peur du piratage sur ces mêmes réseaux, en sont deux exemples. Cetravail de thèse vise à développer un nouveau moyen de protection contre certaines deces ondes électromagnétiques. Plus spécifiquement, ce travail se focalise sur unetechnologie capable de filtrer uniquement les ondes WiFi et GSM à travers de grandessurfaces d’une habit
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Lester. "Structural considerations for superhydrophobic and superoleophobic surfaces." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/52914.

Full text
Abstract:
Highly fluid repellent have application in many industries ranging from marine to biomedical due to their self-cleaning antifouling properties. The development and implementation of these superhydrophobic (water contact angle >150 degrees ) and superoleophobic (oil contact angle > 150 degrees ) surfaces were studied in this thesis. We focused our studies on paper as a substrate for these superhydrophobic and superoleophobic surfaces. Cellulose based paper is a biodegradable, inexpensive material that is ideal for disposable use applications. Applying an oxygen plasma etching technique combined
APA, Harvard, Vancouver, ISO, and other styles
9

Sananpanichkul, Wanna. "Paper and printed paper surface characteristics studied using an optical method." Thesis, Open University, 1993. http://oro.open.ac.uk/54812/.

Full text
Abstract:
A non-contact optical method for evaluating surface characteristics is reviewed. The optical reflectance instrument has been improved to be able to evaluate printed surfaces. Experiments were conducted with solid prints prepared on two types of papers printed with a heatset yellow ink. Both paper surfaces and printed surfaces are characterized into two regions: above the surface plane resulting in macrosmoothness (Sm) and below the surface plane resulting in microsmoothness (Su). For a better understanding of such optical print smoothness, a printed surface model is proposed based on Barkas' c
APA, Harvard, Vancouver, ISO, and other styles
10

Charoenpholphibool, Wandee. "The study of paper surface efficiency /." Online version of thesis, 1989. http://hdl.handle.net/1850/11467.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Surface structure of paper"

1

Hermann, Klaus. Crystallography and Surface Structure. Wiley-VCH Verlag GmbH & Co. KGaA, 2011. http://dx.doi.org/10.1002/9783527633296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cellulose Conference (10th 1988 Syracuse, N.Y.). Cellulose and wood--chemistry and technology: Biogenesis and structure of cellulose ; the cellulose-water system ; chemistry of cellulose and wood ; surface chemistry of wood and paper ; cellulosic membranes : proceedings of the Tenth Cellulose Conference. Edited by Schuerch Conrad, Sarko A, and College of Environmental Science and Forestry. Cellulose Research Institute. Wiley, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Krop, Esther, and Philip Stroomberg. Plain paper: Surface. Alauda Publications, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cara, McCarty, McQuaid Matilda, Museum of Modern Art (New York, N.Y.), and St Louis Art Museum, eds. Structure and surface: Contemporary Japanese textiles. Museum of Modern Art, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

E, Conners Terrance, and Banerjee Sujit 1950-, eds. Surface analysis of paper. CRC Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hermann, Klaus. Crystallography and Surface Structure: An Introduction for Surface Scientists and Nanoscientists. Wiley-VCH Verlag GmbH & Co. KGaA, 2016. http://dx.doi.org/10.1002/9783527697137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hermann, Klaus. Crystallography and surface structure: An introduction for surface scientists and nanoscientists. Wiley-VCH, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Anthony, Bristow J., and Kolseth Petter, eds. Paper structure and properties. M. Dekker, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jacek, Lipkowski, and Ross P. N, eds. Structure of electrified interfaces. VCH Publishers, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

McHargue, Carl J. Structure-Property Relationships in Surface-Modified Ceramics. Springer Netherlands, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Surface structure of paper"

1

Shou, LingChao, HeQuan Zhao, XiaoBo Sun, Jin Pang, Ting Bao, and LiFeng Wang. "Analysis of the Influence of Foundation Pit Excavation on the Surrounding Surface Settlement and Retaining Structure." In Advances in Frontier Research on Engineering Structures. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8657-4_18.

Full text
Abstract:
AbstractThis paper analyzes the foundation pit of Gen Shan East Road through tunnels under the river. The results show: When digging to the bottom, the maximum horizontal displacement of the wall is located at 2 ~ 4 m above the bottom of the pit, and the maximum value is 0.57‰ ~ 0.64‰H. The surface subsidence is mainly of groove type. The maximum surface settlement is 0.107%H. The mean value of the maximum surface settlement is about 0.91 times the maximum horizontal displacement of the wall, and the maximum surface settlement is between 0.58 and 1.91 times the maximum horizontal displacement
APA, Harvard, Vancouver, ISO, and other styles
2

Ming, Geng, Bo Zhou, Xiaohua Luo, Ren Ling, and Mingxiang Zhou. "Rail Surface Defect Detection Method Based on Deep Learning Method with 3D Range Image." In Advances in Frontier Research on Engineering Structures. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8657-4_5.

Full text
Abstract:
AbstractIn the methods of using images for detecting surface defects of rails, the interaction such as light, stains, and water stains will cause false alarms. This paper proposals a method to detect surface defects of rails using 3D range line scan cameras combined with deep learning. By using the 3D range camera to acquire the information and 2D image information, and optimizing The original internet neural network structure, combined with the channel attention mechanism, a twin unet &amp; 3D+ neural network model is proposed. First, the required database was established by using the 3D rang
APA, Harvard, Vancouver, ISO, and other styles
3

Xie, Weiyi, Youfu Song, Yihong Chen, Xuewei Lu, Xiangjie Xiong, and Changli Liu. "Analysis of Excitation Force on Aeroengine Blisk Structure." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_72.

Full text
Abstract:
Abstract The aerodynamic forces acting on the surface of the turbine rotor blades are the main factor to affect their vibration characteristics, and the resonance of rotor blades can be determined and forced response analysis can be carried out based on the characteristics of aerodynamic excitation force. In the paper, the equivalent aerodynamic excitation forces on the surface of the rotor blade of a certain aeroengine blisk structure are extracted and analyzed, and then the frequency distribution of the excitation force and its variation with rotating speed are analyzed in the time and frequ
APA, Harvard, Vancouver, ISO, and other styles
4

Yan, Tingxu, Huiping Zhu, Xudong Liu, et al. "Wetting Behavior of LBE on 316L and T91 Surfaces with Different Roughness." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_41.

Full text
Abstract:
AbstractIn this paper, two typical candidate structural materials of 316L and T91 with different surface roughnesses were studied at temperatures from 200–500 ℃. The surface with different roughness was prepared by mechanical polishing on the sandpapers with particle sizes from 400 to 2000 mesh. The wetting test was carried out in a smart contact angle measuring device by using the sessile-drop method. Meanwhile, the microstructure of the liquid-solid surface was analyzed by scanning electron microscope (SEM). The results show that the surfaces of both materials are non-wetting to LBE in the t
APA, Harvard, Vancouver, ISO, and other styles
5

Hou, Shengjun, Gaojin Zhao, Yongfeng Yang, Fengjiao Fu, and Qilin Li. "A Method for Determining the Pile Location of Pile Based on the Point Safety Factor Distribution of Reinforced Slope." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1748-8_14.

Full text
Abstract:
AbstractAnti-slide pile is one of the supporting structures commonly used in landslide treatment, while the determination of pile location is empirical. A highway landslide in Yunnan Province was selected as a study case, this paper proposes a method to determine the anti-slide pile location based on the point safety factor distribution of sliding surface. The study found that the local sliding surface has a large value of point safety factor in the anti-slide section. With increase of the proportion of the anti-slide section, the anti-sliding ability of the slide surface can be fully utilized
APA, Harvard, Vancouver, ISO, and other styles
6

Ding, Yutang, Yangyang Lu, and Guowen Xiong. "The Design of Safety Monitoring System for Navigation Hubs Built in Plain Area." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_22.

Full text
Abstract:
AbstractNavigation hubs built in plain area usually have large space span and compact structure layout. Safety monitoring performance, especially the surface deformation monitoring performance, is sensitive to the monitoring distance and structure features. Thus the monitoring system should be elaborately designed to meet the requirement of accuracy and robustness. Conventional approaches for surface deformation monitoring are time-consuming and suffering from low accuracy. In this paper, the designing strategies and monitoring techniques for surface deformation monitoring in Jiepai Navigation
APA, Harvard, Vancouver, ISO, and other styles
7

He, Xiaoxu, and Mingyu Sun. "Biomimetic Form-Finding Study of Bone Needle Microstructure Based on Sponge Regeneration Behavior." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8405-3_8.

Full text
Abstract:
AbstractThe concept of “nature-algorithm-structure” refers to a digital design method in architecture that draws inspiration from nature, extracting its mathematical and physical conceptual models to construct structural systems with parameters. This study aims to address the challenge of parametric form-finding in reticular tension structures. By observing the phenomenon of “sponge regeneration”, we further illustrate the generation and optimization of reticular tension structures through the hierarchical structures of “monomer”-“path”-“mesh”. Tensile structural systems are rebound forms, and
APA, Harvard, Vancouver, ISO, and other styles
8

Ke, Jinlin, Xiongfei Lv, and Cuncun Jiang. "Tolerance Analysis Method of Aircraft Door Sealing Structure Based on Linear Simplified Model." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_100.

Full text
Abstract:
AbstractAs a moving component of the aircraft, the sealing state of the door will directly affect the aircraft's pressurization level and aerodynamic performance. The existing analysis methods of sealing structures mainly consider the compression deformation and contact stress of the seals. However, in practical engineering applications, it has been found that the sealing performance of cabin door depends on the interaction between the sealing structure and the seal. On the one hand, the tolerance fluctuation and elastic deformation of the sealing structure will cause the deviation between the
APA, Harvard, Vancouver, ISO, and other styles
9

Bob, Corneliu, Sorin Dan, Catalin Badea, Aurelian Gruin, and Liana Iures. "Strengthening of the Frame Structure at the Timisoreana Brewery, Romania." In Case Studies of Rehabilitation, Repair, Retrofitting, and Strengthening of Structures. International Association for Bridge and Structural Engineering (IABSE), 2010. http://dx.doi.org/10.2749/sed012.057.

Full text
Abstract:
&lt;p&gt;Many structures built in Romania before 1970 were designed for gravity loads with inadequate lateral load resistance because earlier codes specified lower levels of seismic loads. Some of these structures are still in service beyond their design life. Also, some deterioration was observed in existing structures due to the actions of different hazard factors. This paper presents the case study of a brewery with reinforced concrete framed structure of five storeys and a tower of nine storeys, which has been assessed and strengthened. The brewery and the tower were built in 1961 and an ext
APA, Harvard, Vancouver, ISO, and other styles
10

Rosso, Stefano, Andrea Curtarello, Federico Basana, et al. "Modeling Symmetric Minimal Surfaces by Mesh Subdivision." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_40.

Full text
Abstract:
AbstractThanks to the great diffusion of additive manufacturing technologies, the interest in lattice structures is growing. Among them, minimal surfaces are characterized by zero mean curvature, allowing enhanced properties such as mechanical response and fluidynamic behavior. Recent works showed a method for geometric modeling triply periodic minimal surfaces (TPMS) based on subdivision surface. In this paper, the deviation between the subdivided TPMS and the implicit defined ones is investigated together with mechanical properties computed by numerical methods. As a result, a model of mecha
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Surface structure of paper"

1

Fletcher, JF. "Soluble Salt Determination Using the Saturated Filer Paper Extraction Method." In SSPC 2014 Greencoat. SSPC, 2014. https://doi.org/10.5006/s2014-00015.

Full text
Abstract:
Abstract The determination of the concentration of soluble salts on a surface prior to the application of paint is a key inspection task for most protective coating processes. The entrapment of soluble salts, particularly on a steel surface can lead to premature coating adhesion failure and corrosion cells being established. This leads to a severe reduction in the expected life of the protective paint system. SSPC Guide 15 describes the saturate special filter paper conductivity meter methodology amongst others for the retrieval and analysis of soluble salts from steel and other nonporous surf
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Zichen, Zhongxin Xue, Xingzhong Yan, Shuyan Pan, Jianyu Ge, and Qinghua Xiao. "Research on the Development Process of Surface Discharge Defects of Oil-paper Insulation Structures." In 2024 6th International Conference on Power and Energy Technology (ICPET). IEEE, 2024. https://doi.org/10.1109/icpet62369.2024.10940277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Forsström, Jennie, Malin Eriksson, and Lars Wågberg. "Molecular Interactions between Model Cellulose Surfaces and Ink – Influence of Surface Energy and Surface Structure on Adhesion." In Advances in Paper Science and Technology, edited by S. J. I’Anson. Fundamental Research Committee (FRC), Manchester, 2005. http://dx.doi.org/10.15376/frc.2005.2.1379.

Full text
Abstract:
The influence of surface roughness and surface hydrophobicity on ink detachment of water-based flexographic ink was studied. It was shown that increased surface roughness and an increased surface hydrophobicity both had a negative effect on ink detachment. The increased surface roughness was suggested to increase the molecular contact area between ink and cellulose and thereby also to decrease ink detachment. Ink cellulose interaction was evaluated from interfacial energies and contact angle measurements. A new technique in which the adhesion properties between ink and the model cellulose surf
APA, Harvard, Vancouver, ISO, and other styles
4

Falco, Charles M., Patrick A. Kearney, Judith A. Ruffner, and Jon M. Slaughter. "Structure and x-ray optical properties of MBE-grown multilayers (Invited Paper)." In International Symposium on Optical Fabrication, Testing, and Surface Evaluation, edited by Jumpei Tsujiuchi. SPIE, 1992. http://dx.doi.org/10.1117/12.132125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hirn, Ulrich, Johannes Kritzinger, Michael Donoser, and Wolfgang Bauer. "Introducing a Concept to Link 3D Paper Structure to 2D Paper Properties." In Advances in Pulp and Paper Research, Oxford 2009, edited by S. J. I’Anson. Fundamental Research Committee (FRC), Manchester, 2009. http://dx.doi.org/10.15376/frc.2009.2.721.

Full text
Abstract:
This paper introduces a concept that spatially links local paper properties from a 3D paper dataset to a 2D paper property map of the same sample. The concept exploits the fact that paper is a planar structure. This permits successive conversion of 3D paper datasets first to a 3D surface (the paper center surface) and further to a plane. The flattened 3D paper data can then be linked to the 2D paper property map. Laser micro holes applied to the paper are employed as marks for alignment of the 2D maps. The key step of the procedure is flattening the paper data from a warped 3D surface to a 2D
APA, Harvard, Vancouver, ISO, and other styles
6

Ketola, Annika E., Miika Leppänen, Tuomas Turpeinen, et al. "Wet Fibre Surface – Does it Behave Like a Gel?" In Advances in Pulp and Paper Research. Pulp & Paper Fundamental Research Committee (FRC), Manchester, 2022. http://dx.doi.org/10.15376/frc.2022.1.119.

Full text
Abstract:
The physico-chemical characteristics of wet fibre surfaces and their role in fibre bonding and paper properties have been under debate and research for decades. The gel-likeness of the fibre surfaces has been addressed in many studies but has not been explicitly demonstrated. In this study, the structure of wet beaten kraft pulp fibre surface and its similarity with microfibrillated cellulose (CMF) was shown using helium ion microscopy (HIM) imaging. Beaten kraft fibres and CMF were dried using two mild drying methods to preserve the delicate fibrillated structures. The fibre surface had a str
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Zhikai, Feng Chen, Jing Chen, et al. "Study on Laser-Controlled Surface Preparation and Condensation Heat Transfer Characteristics of Copper-Based Micro-Nano Structure Surface." In 2024 31st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/icone31-135222.

Full text
Abstract:
Abstract The micro-nano structure surface has significant influence on the condensation heat transfer. Studying and designing micro-nano structure parameters help to better explore methods for improving surface condensation heat transfer performance. In this paper, we firstly processed hill shaped microstructure with customizable structural parameters on the copper surface using femtosecond laser technology. Subsequently, copper oxide nanowire structures were prepared on copper surfaces with hill shaped microstructures utilizing thermal oxidation method by tube furnace. We have been conducted
APA, Harvard, Vancouver, ISO, and other styles
8

Mangin, P. J., M. C. Béland, and L. M. Cormier. "A Structural Approach to Paper Surface Compressibility – Relationship with Printing Characteristics." In Products of Papermaking. Fundamental Research Committee (FRC), Manchester, 1993. http://dx.doi.org/10.15376/frc.1993.3.1397.

Full text
Abstract:
Three-dimensional topographical maps of paper surfaces under load have been quantified using the confocal laser scanning microscopy. Distributions of the paper surface pores of the same area under different loads were evaluated by the Equivalent Surface Pore (ESP). The ESP roughness of the uncompressed and compressed surfaces of TMP and bleached kraft papers, calendered to the same Print-Surf roughness with different calendering processes, were used to evaluate the local static compressibility of these paper surfaces. Assuming an exponential decay of roughness with pressure, the local static c
APA, Harvard, Vancouver, ISO, and other styles
9

Kimura, Minoru, Satoshi Kimura, Zi-Dong Qi, Shigenori Kuga, and Akira Isogai. "Porous Structure of Never-Dried Pulp Fibers Analyzed by Nitrogen Adsorption Method." In Advances in Pulp and Paper Research, Cambridge 2013, edited by S. J. I’ Anson. Fundamental Research Committee (FRC), Manchester, 2013. http://dx.doi.org/10.15376/frc.2013.2.821.

Full text
Abstract:
Porous structures of never- dried pulp fibers were investigated by nitrogen adsorption method. A distinct bent-point in the desorption isotherms was observed at a 45% relative vapor pressure for both softwood and hardwood never- dried pulp fibers. The singular reduction in nitrogen adsorption volume was likely attributed to the presence of mesopores formed via lignin removal in wood cell walls during pulping, which was indicated from the results of nitrogen adsorption/desorption isotherms for partially delignified wood powders. The specific surface area of a sufficiently delignified softwood p
APA, Harvard, Vancouver, ISO, and other styles
10

Manninen, Marjo A., Kaarlo L. Nieminen та Thad C. Maloney. "The Swelling and Pore Structure of Microfibrillated Cellulose". У Advances in Pulp and Paper Research, Cambridge 2013, редактор S. J. I’ Anson. Fundamental Research Committee (FRC), Manchester, 2013. http://dx.doi.org/10.15376/frc.2013.2.765.

Full text
Abstract:
The aim of this work was to understand the particle level swelling and pore structure of microfibrillated cellulose (MFC). For this purpose, a new variant of the solute exclusion test was constructed which takes into account the adsorption of dextran onto the cellulosic material and the elastic response of the fiber material to external osmotic pressure. With the new method, two important properties, fiber saturation point at zero external osmotic pressure (FSP0) and isotropic elastic modulus could be obtained. The particle level swelling for MFC was found to be 1.6 ml/g which is about the sam
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Surface structure of paper"

1

Bond, W., Maria Seale, and Jeffrey Hensley. A dynamic hyperbolic surface model for responsive data mining. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/43886.

Full text
Abstract:
Data management systems impose structure on data via a static representation schema or data structure. Information from the data is extracted by executing queries based on predefined operators. This paradigm restricts the searchability of the data to concepts and relationships that are known or assumed to exist among the objects. While this is an effective and efficient means of retrieving simple information, we propose that such a structure severely limits the ability to derive breakthrough knowledge that exists in data under the guise of “unknown unknowns.” A dynamic system will alleviate th
APA, Harvard, Vancouver, ISO, and other styles
2

Rosales, Judith, Paul E. Ouboter, and David S. Hammond. Managing the Freshwater Impacts of Surface Mining in Latin America. Inter-American Development Bank, 2013. http://dx.doi.org/10.18235/0009091.

Full text
Abstract:
This paper provides a brief overview of the linkages between the primary factors driving gold mining, how these interact with regional geology to concentrate impacts on specific river basins, and the primary environmental and social impacts that can erode the economic benefit delivered from gold production if it is left unmanaged. We consider these impacts in the context of operational scale and the regional differences in background hydrological conditions with a view to identifying freshwater systems that are most inherently vulnerable to the effects of mining and that thus have the greatest
APA, Harvard, Vancouver, ISO, and other styles
3

Vecherin, Sergey, Stephen Ketcham, Aaron Meyer, Kyle Dunn, Jacob Desmond, and Michael Parker. Short-range near-surface seismic ensemble predictions and uncertainty quantification for layered medium. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/45300.

Full text
Abstract:
To make a prediction for seismic signal propagation, one needs to specify physical properties and subsurface ground structure of the site. This information is frequently unknown or estimated with significant uncertainty. This paper describes a methodology for probabilistic seismic ensemble prediction for vertically stratified soils and short ranges with no in situ site characterization. Instead of specifying viscoelastic site properties, the methodology operates with probability distribution functions of these properties taking into account analytical and empirical relationships among viscoela
APA, Harvard, Vancouver, ISO, and other styles
4

Riley, Mark, and Akis Pipidis. The Mechanical Analogue of the "Backbending" Phenomenon in Nuclear-structure Physics. Florida State University, 2008. http://dx.doi.org/10.33009/fsu_physics-backbending.

Full text
Abstract:
This short pedagogical movie illustrates an effect in nuclear physics called backbending which was first observed in the study of the rotational behavior of rapidly rotating rare-earth nuclei in Stockholm, Sweden in 1971. The video contains a mechanical analog utilizing rare-earth magnets and rotating gyroscopes on a turntable along with some historic spectra and papers associated with this landmark discovery together with its explanation in terms of the Coriolis induced uncoupling and rotational alignment of a specific pair of particles occupying high-j intruder orbitals. Thus backbending rep
APA, Harvard, Vancouver, ISO, and other styles
5

Kevan, S. D. Surface and interface electronic structure. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6171208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Glass, A. S., J. W. Larsen, D. M. Quay, and J. E. Roberts. Thermodynamics and surface structure of coals. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/7154253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Glass, A. S., J. W. Larsen, D. M. Quay, J. E. Roberts, and P. C. Wernett. Thermodynamics and surface structure of coals. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/7172182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Larsen, J. W., D. M. Quay, J. E. Roberts, and P. C. Wernett. Thermodynamics and surface structure of coals. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/7181414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wernett, P. C., and J. W. Larsen. Surface structure and thermodynamics of coals. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/7181419.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Glass, A. S., J. W. Larsen, D. M. Quay, J. E. Roberts, and P. C. Wernett. Thermodynamics and surface structure of coals. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/7196030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Surface structure of paper' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography