Relevant bibliographies by topics / Surfaces (Technology) Mechanical wear. Metal-cutting

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Surfaces (Technology) Mechanical wear. Metal-cutting'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Surfaces (Technology) Mechanical wear. Metal-cutting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Surfaces (Technology) Mechanical wear. Metal-cutting"

1

., Nagaraja, Raviraja Adhikari, and T. Yasir. "An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap." Journal of Mechanical Engineering and Sciences 13, no. 1 (2019): 4575–95. http://dx.doi.org/10.15282/jmes.13.1.2019.16.0386.

Full text
Abstract:
The present study deals with tapping of Al6061/SiC metal matrix composite. Stir casting technique was used for the fabrication of composite. Castings were produced by varying weight percentages of SiC (5%, 7.5% and 10%) of 23μm size in Al6061. The tapping experiments were conducted for the machinability study of Al6061/SiC metal matrix composite using M8 x 1.25 HSS machine taps. The tapping operation was performed under dry condition with different cutting speeds. Torque required for tapping was measured using piezoelectric based 4-component drill tool dynamometer. Surface morphology and profi
APA, Harvard, Vancouver, ISO, and other styles
2

Pang, Minghua, Xiaojun Liu, and Kun Liu. "Effect of conical micro-grooved texture on tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233, no. 5 (2018): 791–804. http://dx.doi.org/10.1177/1350650118804907.

Full text
Abstract:
Purpose This study aimed to clarify the influence mechanism of conical micro-grooved texture on the tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools under flood lubrication conditions. Design/methodology/approach Conical micro-grooved texture was fabricated on the tool rake face using laser texture technology. Metal cutting tests were conducted on AISI 1045 steel with conventional and developed tools for various cutting speeds (80 m/min to 160 m/min) and conical angles of micro-grooved texture (2 ° to 5 °) under flood lubrication condition. The effect of
APA, Harvard, Vancouver, ISO, and other styles
3

Astarita, Antonello, Silvio Genna, Claudio Leone, Fabrizio Memola Capece Minutolo, Valentino Paradiso, and Antonino Squillace. "Laser Cutting of Aluminium Sheets with a Superficial Cold Spray Titanium Coating." Key Engineering Materials 611-612 (May 2014): 794–803. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.794.

Full text
Abstract:
In the manufacturing of metal components both wear and corrosion have to be considered. In particular, corrosion is a primary problem in the aeronautic field, where the aluminium alloys are affected by several corrosion typologies. Furthermore, nowadays carbon fibre reinforced plastics (CFRP) are finding an increasing use, but they can induce galvanic corrosion phenomena when coupled with aluminium alloys. To overcome this problem, corrosion resistant coatings are used on aluminium components. On these premises, the realization of a titanium coating on aluminium components could allow the coup
APA, Harvard, Vancouver, ISO, and other styles
4

Tian, Xinli, Long Wang, Wanglong Wang, Yongdong Li, and Kaiwen Ji. "Tool wear characteristics of cutting and extrusion processing technology based on the edge-chipping effect." Industrial Lubrication and Tribology 68, no. 2 (2016): 191–96. http://dx.doi.org/10.1108/ilt-04-2015-0051.

Full text
Abstract:
Purpose – The cutting and extruding processing technology for ceramics based on the edge-chipping effect is a new contact removal machining method for hard, brittle materials such as engineering ceramics. This paper aims to provide an important reference to understand the tool wear mechanism and the wear law of this new processing technology. Design/methodology/approach – The real-time temperature monitoring and the observation of micro-morphology are used to analyse the wear characteristics of the tool face. In addition, the research focuses on the influence of three processing parameters (ax
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Hui, Jian Xin Deng, Gui Yu Li, Xing Ai, and Jun Zhao. "Effect of Ambient Temperature on Wear of Cemented Carbide Tool Material." Advanced Materials Research 148-149 (October 2010): 276–79. http://dx.doi.org/10.4028/www.scientific.net/amr.148-149.276.

Full text
Abstract:
Cemented carbide has relatively good mechanical properties, so it is widely used as cutting tools. In this paper, a sliding wear test at high ambient temperature between cemented carbide tool material and ceramic was carried out using a ball-on-disc wear-test machine. The characteristics as to wear rate and friction coefficient were investigated. The special wear rate increased with an increase in operating temperature. The cemented carbide material with addition of TiC phase gave better wear resistance than cemented tungsten carbides at elevated temperature. SEM technology was adopted to obse
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Kuan Ming. "Experimental Study on Minimum Quantity Lubrication in Mechanical Micromachining." Advanced Materials Research 579 (October 2012): 193–200. http://dx.doi.org/10.4028/www.scientific.net/amr.579.193.

Full text
Abstract:
Mechanical micromachining is a promising technique for making complex microstructures. It is challenging to apply mechanical micromachining in the industry due to the low strength of micro tools. Therefore, it is not easy to accurately control the product dimension error and to raise the production rate. In this paper, the applications of minimum quantity lubrication (MQL) in micro-milling and micro-grinding are presented. MQL is considered as a green manufacturing technology in metal cutting due to its low impact on the environment and human health. This study compares the tool wear and surfa
APA, Harvard, Vancouver, ISO, and other styles
7

Weiser, Ingo Felix, Andreas Feuerhack, and Thomas Bergs. "Investigation of the Micro Hardness at the Cut Surface of Fine Blanked Parts with Variation of Sheet Material and Cutting Temperature." Key Engineering Materials 883 (April 2021): 269–76. http://dx.doi.org/10.4028/www.scientific.net/kem.883.269.

Full text
Abstract:
Fine blanking is a production technology of high importance especially for the automotive industry. As a procedure of sheet metal separation, it is possible to produce complex parts in a single stroke. As a difference to conventional punching, the cutting surface of fine blanked parts can often be used as a functional surface without further process steps. However, fine blanking as a forming process changes the microstructure of the metal sheet to a higher extend than cutting or machining processes. Due to this, it is of utmost importance to investigate the cause-effect-relations between the f
APA, Harvard, Vancouver, ISO, and other styles
8

Umanath, K., S. T. Selvamani, K. Palanikumar, and Ram G. Dinesh. "Worn Surface Analysis of Hybrid Metal Matrix Composite." Advanced Materials Research 984-985 (July 2014): 546–50. http://dx.doi.org/10.4028/www.scientific.net/amr.984-985.546.

Full text
Abstract:
Metal to the metal wear analysis of Aluminium (Al6061grade) alloy, dis-continuously reinforced with ceramic particles of SiC and Al2O3deliver this paper. The Al matrix with 5 to 25% of vol. Fractions of SiC and Al2O3particulate reinforcements were formed in Hybrid Metal Matrix Composite (HMMC) by stirring casting technology. They are finding applications in automotive, aeronautical and sport goods. For the proper use of these composites, its mechanical properties and wear properties are to be evaluated. The dry sliding behavior of these SiC and Al2O3particulates HMMCs and that of Al alloy at a
APA, Harvard, Vancouver, ISO, and other styles
9

BELASHOVA, I. S., L. N. RABINSKI, and O. V. TURSHAVINA. "EVALUATION OF HARDENING EFFICIENCY WITH CONVECTIVE HEAT AND MASS TRANSFER MECHANISM DURING LASER SURFACE ALLOYING IN REFLOW MODE." Periódico Tchê Química 16, no. 33 (2019): 498–504. http://dx.doi.org/10.52571/ptq.v16.n33.2019.513_periodico33_pgs_498_504.pdf.

Full text
Abstract:
The modern stage of equipment development imposes increased requirements for the performance characteristics of parts. Different components and parts of machines, metal-cutting tools and metal structural elements work in the conditions of high friction, high specific loads, high temperatures, a wide range of speeds and impact of aggressive media, for instance. Therefore, improvement the quality, reliability, economical efficiency and productivity of machines, tools, equipment and other engineering products as well as reduction of their specific material consumption and energy consumption is ac
APA, Harvard, Vancouver, ISO, and other styles
10

Seong, Yeonuk, Donghyeon Lee, Jihye Yeom, and Junhong Park. "The Feature Extraction through Wavelet Coefficients of Metal Friction Noise for Adhesive and Abrasive Wear Monitoring." Applied Sciences 11, no. 9 (2021): 3755. http://dx.doi.org/10.3390/app11093755.

Full text
Abstract:
Friction between metals is a physical phenomenon that occurs in manufacturing machine tools. This annoying noise implies unnecessary metal contact and deterioration of a mechanical system. In this study, for the monitoring of the friction between two metal surfaces, the acoustic signature was extracted by applying the wavelet transform method to the noise measured from the change in contact force for each state of adhesive and abrasive wear. Experiments were conducted with a constant relative speed between the contacting metal surfaces. For the adhesive wear, the peak signal-to-noise ratio (PS
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Surfaces (Technology) Mechanical wear. Metal-cutting"

1

Yen, Yung-Chang. "Modeling of metal cutting and ball burnishing prediction of tool wear and surface properties /." Columbus, Ohio : Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1073065455.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2004.<br>Title from first page of PDF file. Document formatted into pages; contains xxviii, 254 p.; also includes graphics. Includes abstract and vita. Advisor: Taylan Altan, Dept. of Industrial and Systems Engineering. Includes bibliographical references (p. 240-248).
APA, Harvard, Vancouver, ISO, and other styles
2

Aguiar, Herbert César Gonçalves de. "Contribuição ao estudo do torneamento do aço inoxidável superduplex empregando ferramentas de metal duro com revestimentos." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264548.

Full text
Abstract:
Orientador: Amauri Hassui<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica<br>Made available in DSpace on 2018-08-21T02:22:26Z (GMT). No. of bitstreams: 1 Aguiar_HerbertCesarGoncalvesde_M.pdf: 11222250 bytes, checksum: a22406ca3de132e13522314dd3490816 (MD5) Previous issue date: 2012<br>Resumo: Os aços inoxidáveis superduplex são materiais de estrutura bifásica contendo ferrita e austenita, que garantem ao material boa resistência à corrosão por pitting, resistência mecânica e outras características que tornam o material atrativo para as indústri
APA, Harvard, Vancouver, ISO, and other styles
3

Campos, José Alexandre de. "Avaliação experimental do desgaste de canto durante o processo de eletroerosão do AISI H13." Universidade Tecnológica Federal do Paraná, 2014. http://repositorio.utfpr.edu.br/jspui/handle/1/1165.

Full text
Abstract:
A fabricação de moldes e matrizes são ricas em detalhes e geometrias complexas, exigindo tecnologias mais inovadoras e precisas. Um dos processos que se destaca na fabricação de moldes e matrizes, é o de eletroerosão por penetração (Electrical Discharge Machining - EDM). A usinagem por descargas elétricas é classificada como um processo de fabricação de geometria não definida, onde a remoção de material é realizada por repetidas descargas elétricas entre dois eletrodos eletricamente condutores. O desgaste da ferramenta é um dos principais parâmetros de medida no desempenho da usinagem por EDM.
APA, Harvard, Vancouver, ISO, and other styles
4

Vale, João Luiz do. "Influência da microestrutura de ferros fundidos na ocorrência de metal dobrado e no comportamento tribológico de superfícies brunidas." Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/2740.

Full text
Abstract:
O presente trabalho discute a influência da microestrutura dos ferros fundidos, cinzento (FFC) e vermicular (FFV), na ocorrência de metal dobrado (FM) em superfícies brunidas e no comportamento tribológico em ensaio lubrificado do tipo anel sobre cilindro. As amostras de ferro fundido foram extraídas diretamente de um bloco de motor de combustão interna, em regiões de diferentes espessuras. O anel de pistão utilizado foi de aço inoxidável martensítico nitretado com perfil assimétrico e o óleo lubrificante foi o SAE 30 CF monoviscoso. A quantificação de sulcos e de metal dobrado (FM) foi realiz
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Surfaces (Technology) Mechanical wear. Metal-cutting"

1

Das, Suman Kalyan, Supriyo Roy, and Prasanta Sahoo. "Corrosion and Wear Behavior of Electroless Nickel Coatings." In Handbook of Research on Developments and Trends in Industrial and Materials Engineering. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1831-1.ch010.

Full text
Abstract:
This chapter describes how corrosion is the degradation of a material due to a reaction with its environment. Wear is another deteriorating phenomenon which erodes the contacting surfaces of any mechanical component gradually. Although corrosion and wear are two different phenomenon they are often interdependent and in most practical situations take place simultaneously. Fortunately, several surface modification methods exist which can protect the surface of metal against corrosion and wear. Among them, electroless nickel coatings is a technology where a coating is applied without the use of external current source. The primary advantages of electroless coatings include uniform coating and ability to coat non-conductive materials. Electroless nickel coatings possess excellent properties such as high hardness, good wear resistance and corrosion resistance. The corrosion and wear behavior of these coatings mainly depend on bath ingredients, deposition conditions, heat treatment temperature, etc.
APA, Harvard, Vancouver, ISO, and other styles
2

Méausoone, Pierre-Jean, and Alfredo Aguilera. "Inventory of Experimental Works on Cutting Tools’ Life for the Wood Industry." In Research Developments in Wood Engineering and Technology. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4554-7.ch009.

Full text
Abstract:
Woodworking is based on a trinomial machine/piece/tool. For maximum quality of the manufactured piece, it is important not to separate this trinomial, but the limited life of tools prevents that permanent contact. This phenomenon is due to the wear of the cutting parts of the tools. The prevention of wear is based on two methods. The first is to anticipate the end point of tool wear, changing these after a fixed period, no matter what. The other school is to recognize the tool wear at the event: the tools are changed once they are really worn out, finding faults on manufactured parts. A worn tool generates pieces with non-compliant quality or even unusable. A deeper understanding of wear and its consequences would change the tool at the right time. The tool wear for wood is due to several phenomena interacting with each other. The first dominating phenomenon is a corrosive attack that decreases the mechanical strength of the surface. The second is an abrasive attack whose work is facilitated by the reduced resistance of the surface. Repeated shocks can be in the degradation of the cutting edge, temperature acting as amplifier to wear. Understanding of the wear patterns can characterize the life of tools by wear measurement to find ways to extend this period with development of tool coatings, while maintaining optimal conditions for woodworking to get the best finish.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Surfaces (Technology) Mechanical wear. Metal-cutting"

1

Henerichs, M., C. Dold, R. Voß, and K. Wegener. "Performance of Lasered PCD- and CVD-Diamond Cutting Inserts for Machining Carbon Fiber Reinforced Plastics (CFRP)." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62675.

Full text
Abstract:
Carbon fiber reinforced plastics (CFRP) combine superior mechanical properties with a low weight. Consequently, this material is highly interesting for the aircraft as well as the automotive industry, leading to a massively increased application over the last years. However machining CFRP still faces different difficulties: The material is highly abrasive, most tool substrates and coatings face massive abrasive wear. Machining CFRP often results in many material defects like delamination, fiber pull-out, high surface roughness and burnt matrix material. Several technologies have been developed
APA, Harvard, Vancouver, ISO, and other styles
2

Bardetsky, Alexander, Helmi Attia, and Mohamed Elbestawi. "Evaluation of Tool Wear Suppressive Ability of Lubricants Usein in Minimum Quantity Lubrication Application in High Speed Machining of Cast Aluminum Alloys." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80597.

Full text
Abstract:
The disadvantages of conventional metalworking fluids such as disposal problems, health problems and economic factors have led to the development of strategies to reduce their amount in metalworking. Recently, Minimum Quantity Lubrication (MQL) technology was developed and it seems to be a suitable alternative for economically and environmentally compatible production. It combines the functionality of lubrication with an extremely low consumption of lubricant and has a potential to replace metalworking fluids application in machining operations. The MQL lubricants are formulated with two major
APA, Harvard, Vancouver, ISO, and other styles
3

Anand, M., M. Hadfield, JL Viesca, and B. Thomas. "Experimental Study on the Effect of Marine Engine Lubricant Degradation on Tribological Performance of Cylinder Liner and Piston Rings Contact Using a Tuning Fork Technology Based Oil Sensor." In International Conference on Marine Engineering and Technology Oman. IMarEST, 2019. http://dx.doi.org/10.24868/icmet.oman.2019.009.

Full text
Abstract:
An investigation was carried out to study the effect of changes in oil quality on its tribological performance using a tuning fork technology based oil sensor. In this research, a tribological testing system was commissioned, to simulate the piston ring-cylinder liner sliding contact, and to measure the lubricant condition in real-time using an oil sensor. Tribological contact between cylinder liners and piston rings in marine engines is the most affected region due to excessive thermo-mechanical stresses. At top dead centre, the effect of such stresses is at a maximum where piston-sliding spe
APA, Harvard, Vancouver, ISO, and other styles
4

Gopinath, Muvvala, Debapriya Patra Karmakar, and Ashish Kumar Nath. "Monitoring of Molten Pool Thermal History and its Significance in Laser Cladding Process." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2657.

Full text
Abstract:
The current study focuses on the process monitoring of thermal history and its significance in laser cladding technology. Thermal history of the molten pool during laser cladding was monitored using an IR-pyrometer and the molten pool life time, solidification shelf duration and cooling rates were calculated. Effect of these on three different cases was studied in brief: (a) Elemental segregation in nickel based super alloy, (b) Wettability between metal matrix and WC particles and (c) Decomposition of TiC particles in metal matrix. It was found that with slow cooling rate, formation of Laves
APA, Harvard, Vancouver, ISO, and other styles
5

Dues, Joseph Francis. "Connecting With Industry." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42489.

Full text
Abstract:
In an era of tight budgets, Universities must plan their capital spending on lab equipment carefully. This process is even more critical for smaller colleges and satellite locations. To address the problem of a limited budget for lab equipment but a strong need for expanded labs to meet minimum course requirements, faculty contacted local industry to ask for help. The Mechanical Engineering Technology department includes a metallography lab as one of its core learning objectives in the freshman level Materials I course. The metallography lab consists of mounting, grinding, polishing and etchin
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Yachao, Jing Shi, and Xinnan Wang. "Influences of Silicon Crystal Anisotropy in Nano-Machining Processes Using AFM." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65674.

Full text
Abstract:
Atomic force microscope (AFM) machining has the potential to become an essential technology for manufacturing micro/nano-scale devices. In literature, this technique has been successfully employed to machine various types of materials, including semiconductor materials and metals. However, the effect of material anisotropy in terms of crystal direction is rarely considered in the existing studies. In this paper, we conduct nano-scratching experiments on the (1 0 0) plane of single crystal silicon surface with a diamond tip in an AFM machine. Three levels of crystal direction of nano-scratching
APA, Harvard, Vancouver, ISO, and other styles
7

da Silva, Hebert Roberto, Valtair Antonio Ferraresi, and Rosenda Valdes Arencibia. "Operational Aspects of Coatings Welds: Erosive Wear and Cavitation." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70169.

Full text
Abstract:
The GMAW process using two wires is an alternative to a coating process when high productivity is desired. The potential variants emerging from this process are GMAW cold wire and GMAW double wire. One of the greatest difficulties is the setting of its parameters, which duplication compared to conventional GMAW and also act in a dependent manner. A greater understanding of the technology applied to coatings on turbines in various positions is critical to master the process and its variables for enhancing industrial applications. This study involves an experimental evaluation to verify the infl
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Zheng, Beibei Feng, Xingtuan Yang, and Yanfei Sun. "Prospect of MAO Technology Application in Nuclear Power Industry." In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-15435.

Full text
Abstract:
Micro arc oxidation (MAO) technology known as a newly surface treatment technology has got a widely application in the field of aviation, aerospace, automotive, electronics, and medical industry. Strength, toughness, hardness and corrosion of valve metal such as aluminum, magnesium, copper, zinc, zirconium and their alloys can be greatly improved by MAO technology. This paper tries to probe into the feasibility of using MAO technology in nuclear power industry. Aluminum and its alloys are used as structural materials such as the cladding of reactor fuel and all kinds of pipes in the low nuclea
APA, Harvard, Vancouver, ISO, and other styles
9

Hildering, Sven, Markus Michalski, Ulf Engel, and Marion Merklein. "Tool Load Sensitivity Against Multidimensional Process Influences in Microblanking of Thin Metal Foils With Silicon Punches." In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9206.

Full text
Abstract:
The continuous trend towards miniaturization of metallic micro parts of high quality at low costs results in the need of appropriate production methods. Mechanical manufacturing processes like forming and blanking meet these demands. One major challenge for the application of them are so called size effects. Especially the downsizing of the required manufacturing tools and adequate positioning causes higher effort with increasing miniaturization. One promising approach for downsizing of tools is the transfer of knowledge from microsystems technology. This study shows the process behavior of et
APA, Harvard, Vancouver, ISO, and other styles
10

Ochmann, Lukas, Moh'd M. Amro, Bernd Gronde, Gundula Fischer, Silke Weber, and Dirk Martin. "Development of Plasma Sprayed Coatings to Improve the Erosion Resistance of Wire Wrapped Screens." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21158-ms.

Full text
Abstract:
Abstract The installation of sand screens in wells can fail in one of two ways: by causing an unacceptable high pressure drop in the near wellbore area or by losing the ability to retain particles. Four mechanisms can lead to a failure: plugging, corrosion, erosion and mechanical deformation. To increase the lifetime under erosive conditions, a coating for wire wrapped screens was developed and tested. Erosion occurs, when formation particles hit the screen surface with high velocities or by continuous production of fines through the screen openings. The screen openings must keep a specified s
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Surfaces (Technology) Mechanical wear. Metal-cutting' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography