Log in

Relevant bibliographies by topics / Swaging

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Swaging'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Swaging.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Swaging"

1

Moumi, Eric, Marius Herrmann, Christian Schenck, and Bernd Kuhfuss. "High productivity micro rotary swaging." MATEC Web of Conferences 190 (2018): 15002. http://dx.doi.org/10.1051/matecconf/201819015002.

Full text

Abstract:

Rotary swaging is an incremental forming process with two main process variations plunge and infeed rotary swaging. With plunge rotary swaging, the diameter is reduced within a limited section whereas the infeed rotary swaging enables a diameter reduction over the entire workpiece length. The process is now subject to intensive investigation for manufacturing of micro parts. By increasing the process speed, failures occur particularly due to inappropriate material flow. In plunge rotary swaging, the workpiece material can flow radially into the gap between the dies and thus the workpiece quali

APA, Harvard, Vancouver, ISO, and other styles

2

Atak, Ahmet. "Analytical and Numerical Model of Aluminum Alloy Swaging Ring Design to Study the Effect on the Sealing for Piping Systems." Civil Engineering Journal 7, no. 1 (2021): 107–17. http://dx.doi.org/10.28991/cej-2021-03091641.

Full text

Abstract:

In various fields of engineering, the assembly and repair of hydraulic installations are accomplished by joining the pipes. In such applications, the ring swaging method is used to connect the fittings to the pipes by means of a hydraulic hand tool. The basis to develop a swaging tool relies on the knowledge of the design parameter that influence plastic deformation of the swaging ring. In addition to build control over the design parameters, it is necessary to join pipes under severe conditions such as cryogenic vacuum and constrained space which require an intact sealing. In this study, the

APA, Harvard, Vancouver, ISO, and other styles

3

Iremonger, Michael J., and Gurdip S. Kalsi. "A Numerical Study of Swage Autofrettage." Journal of Pressure Vessel Technology 125, no. 3 (2003): 347–51. http://dx.doi.org/10.1115/1.1593073.

Full text

Abstract:

This paper describes a numerical analysis of the swaging autofrettage of a gun barrel by forcing an oversize mandrel (or “swage”) through the barrel. Analyses are conducted on a two pass swaging procedure in which two separate swages are driven through the barrel. Differences between the maximum swage force required and the resulting barrel deformations and stresses that result from single and two pass swaging are discussed. The effects of changes to swage geometry for single pass swaging are also considered.

APA, Harvard, Vancouver, ISO, and other styles

4

Ishkina, Svetlana, Christian Schenck, Bernd Kuhfuss, Eric Moumi, and Kiron Tobeck. "Eccentric rotary swaging." International Journal of Precision Engineering and Manufacturing 18, no. 7 (2017): 1035–41. http://dx.doi.org/10.1007/s12541-017-0122-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kunčická, Lenka, and Radim Kocich. "Effect of Swaging Temperature on Deformation Behaviour of W93Ni6Co1 Tungsten Heavy Alloy." Key Engineering Materials 865 (September 2020): 91–96. http://dx.doi.org/10.4028/www.scientific.net/kem.865.91.

Full text

Abstract:

The study investigates a W93Ni6Co1 tungsten heavy alloy rotary swaged at 20 °C and 900 °C with the aim to optimize its mechanical properties. Deformation behaviour was predicted via numerical simulations and subsequently verified via experimental swaging. The results showed that swaging at 900 °C led to substantial increase in ductility (24% elongation after the first pass), whereas swaging at room temperature primarily increased the UTS (up to 1800 MPa after the second pass). Among the key differences between both the swaging temperature modes were the different substructure developments; the

APA, Harvard, Vancouver, ISO, and other styles

6

Lim, Seong Joo, Ho Joon Choi, Duk Jae Yoon, Ha Guk Jeong, and C. H. Lee. "Product Geometry for Process Parameter during Rotary Swaging Process as Chipless Forming Process." Materials Science Forum 544-545 (May 2007): 439–42. http://dx.doi.org/10.4028/www.scientific.net/msf.544-545.439.

Full text

Abstract:

This study deals with the dimensional accuracy of outer diameter and geometrical workability in rotary swaged product for various process parameters such as percent reduction in outer diameter and the ratio of thickness to outer diameter of a tube. It is generally known that greater cold strengthening is achieved by rotary swaging process rather than by conventional process such as rolling with respect to the same reduction of cross-sectional area. Percent reduction in the diameter and the ratio are considered and selected as important process parameters because of playing a key role during ro

APA, Harvard, Vancouver, ISO, and other styles

7

Ishkina, Svetlana, Bernd Kuhfuss, and Christian Schenck. "Grain Size Modification by Micro Rotary Swaging." Key Engineering Materials 651-653 (July 2015): 627–32. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.627.

Full text

Abstract:

Rotary swaging is a well established cold forming process e.g. in the automotive industry. In order to modify the material properties by swaging systematically, a new process of swaging with asymmetrical strokes of the forming dies is investigated. The newly developed tools feature flat surfaces and do not represent the geometry of the formed part as in conventional swaging. Numerical simulation and physical tests are carried out with special regard to the resulting geometry, mechanical properties and the microstructure. During these tests copper wires with diameter d0=1 mm are formed. Regardi

APA, Harvard, Vancouver, ISO, and other styles

8

Böhmermann, F., H. Hasselbruch, M. Herrmann, et al. "Trockenrundkneten*/Dry rotary swaging." wt Werkstattstechnik online 105, no. 11-12 (2015): 830–35. http://dx.doi.org/10.37544/1436-4980-2015-11-12-70.

Full text

Abstract:

Rundkneten ist ein Massivumformverfahren zur Herstellung von Leichtbaukomponenten aus zylindrischen Halbzeugen. Es setzt derzeit einen intensiven Einsatz von Schmiermitteln voraus, um Werkzeugverschleiß zu minimieren und die gewünschte Bauteilqualität bereitzustellen. In dieser Arbeit werden strukturierte und hartstoffbeschichtete Rundknetwerkzeuge vorgestellt. Strukturierung und Beschichtung ersetzen die Funktionen des Schmierstoffes und bilden die Grundlage für eine trockene Prozessführung. &nbsp; Rotary swaging is an incremental bulk metal forming process for the manufacture of cylindri

APA, Harvard, Vancouver, ISO, and other styles

9

Lin, Heng Sheng, Chung Ching Lee, Ying Chieh Lin, and Chia Hsien Li. "Micro Rotary Plunge-Swaging of Stainless Pipes." Key Engineering Materials 622-623 (September 2014): 725–30. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.725.

Full text

Abstract:

Micro parts like medical catheters or end effectors require micro rotary swaging to process forming or joining. Higher strength or sophisticated inner features can be achieved through micro rotary swaging which are difficult for the micro machining or grinding process. This work focuses on examining the formability of micro pipes of AISI 304 stainless steel with micro rotary plunge-swaging. Both as-received and vacuum-annealed pipes with both furnace-cooling and water-cooling were tested. The micro hardness and grain size of the as-received and vacuum-annealed pipes were measured. The result s

APA, Harvard, Vancouver, ISO, and other styles

10

Lim, Seong Joo, Ho Joon Choi, Kyoung Hoan Na, and C. H. Lee. "Dimensional Characteristics of Products Using Rotary Swaging Machine with Four-Dies." Solid State Phenomena 124-126 (June 2007): 1645–48. http://dx.doi.org/10.4028/www.scientific.net/ssp.124-126.1645.

Full text

Abstract:

Experiments under a cold rotary swaging process have been conducted to investigate the dimensional characteristics of the swaged tube and solid bar for obtaining proper product of desirable quality. Dimensional characteristics are expressed in terms of dimensional deviation and surface roughness of swaged product through the rotary swaging process. The process variables such as forming speed and percent reduction of outer diameter of the product are considered and selected because of playing a key role in the rotary swaging process. Furthermore the developed rotary swaging machine with four-sp

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Swaging"

1

Görtan, Mehmet Okan [Verfasser], Peter [Akademischer Betreuer] Groche, and Clemens [Akademischer Betreuer] Müller. "Severe plastic deformation of metallic materials by equal channel angular swaging: Theory, experiment and numerical simulation / Mehmet Okan Görtan. Betreuer: Peter Groche ; Clemens Müller." Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2014. http://d-nb.info/1110902077/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lourenço, Julio Cesar. "Efeito do processo de solidificação, deformação plástica e recristalização sobre o comportamento eletroquímico da liga Al-4,5% p.Cu em soluções aquosas." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/97/97134/tde-29032017-092513/.

Full text

Abstract:

A liga binária Al-Cu é a base para todas as ligas da série 2xxx que são de grande importância em diversas aplicações como na indústria aeronáutica, transporte, máquinas e equipamentos. No entanto, pouco se conhece sobre os efeitos do tipo de solidificação desta liga e da deformação plástica sobre sua resistência à corrosão em meio aquoso. O escopo deste trabalho foi procurar correlacionar microestruturas da liga Al-4,5%p.Cu solidificada de maneira convencional e unidirecional vertical ascendente (brutas de fusão, deformadas plasticamente por forjamento rotativo a frio, e tratadas termicamente

APA, Harvard, Vancouver, ISO, and other styles

3

Tan, Serdar. "Optimization Of Macrostructure In Aluminium Foams." Master's thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/2/1011196/index.pdf.

Full text

Abstract:

Pure aluminium and aluminium-5wt % TiO2 aluminium foams were produced by powder metallurgy technique with the use of TiH2 as foaming agent. Two sizes of TiH2 were used: 20&micro<br>m and 3&micro<br>m. It has been confirmed that high level of compaction is the primary requirement in foaming. It was shown that hot swaging could be used as a method of compaction for foaming as it leads to values close to full density. Pure aluminium foamed at 675&deg<br>C and 725&deg<br>C leads to a volume expansion between 90-180 %. A model was developed for pure aluminium to explain the pore initiation and

APA, Harvard, Vancouver, ISO, and other styles

4

Marr, Tom. "Hochumgeformte Leichtmetallverbundwerkstoffe und deren festigkeitsbestimmende Faktoren." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-133446.

Full text

Abstract:

Da in der Natur die Festigkeit der Stoffe bzw. Werkstoffe mit deren Massendichte korreliert [1], bieten sich dem Werkstoffingenieur zwei Möglichkeiten das genannte Ziel zu erreichen: Entweder er reduziert die effektive Dichte bereits sehr fester Werkstoffe durch konstruktive bzw. geometrische Optimierungen, oder es gelingt sehr leichte Werkstoffe mit deutlich gesteigerter Festigkeit herzustellen. Die erstgenannte Verfahrensweise stellt zu großen Teilen ein konstruktives bzw. fertigungstechnisches Problem dar. Von werkstoffwissenschaftlichem Interesse ist deshalb nur die zweite Möglichkeit. Dab

APA, Harvard, Vancouver, ISO, and other styles

5

Belloy, Philippe. "Intégration de connaissances métier dans la conception : un modèle pour les pièces mécaniques : application à l'usinage et à l'estampage." Université Joseph Fourier (Grenoble), 1994. http://www.theses.fr/1994GRE10219.

Full text

Abstract:

Cette thèse est relative au domaine de la conception en génie mécanique et plus particulièrement à l'intégration des connaissances de fabrication dans un système de conception. Ce type d'intégration nécessite la mise en place de modèles de pièce bien différents des modèles CAO traditionnels. Le modèle de description de pièces que nous proposons est base sur deux types d'entités : les peaux, représentatives des surfaces fonctionnelles composant les pièces et les squelettes représentant les flux de matière entre les surfaces fonctionnelles. A partir de la description minimale des pièces mécaniqu

APA, Harvard, Vancouver, ISO, and other styles

6

Eschke, Andy. "Bestimmung lokaler Textur- und Spannungsverteilungen an submikro-/nanokristallinen mehrphasigen Gradientenmaterialien mittels zweidimensionaler Röntgenmikrobeugung sowie anhand analytischer und numerischer Modellierungsansätze." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-163807.

Full text

Abstract:

Fortschrittliche ingenieurtechnische Anwendungen stellen hohe Ansprüche an neuartige Materialien sowohl hinsichtlich e.g. mechanischer Eigenschaften wie Festigkeit und Duktilität als auch hinsichtlich einer möglichst vielfältigen Einsetzbarkeit (Maßschneiderung etc.). Zudem sind Ressourcenschonung und nachhaltige Produktion bei gleichzeitig hoher Performance zu realisieren. Entsprechend existiert grundlagenseitig Forschungsbedarf zu innovativen Materialien (e.g. Kompositwerkstoffe) und ihren Prozessierungen. In der vorliegenden Dissertation werden submikro-/nanokristalline mehrphasige Gradie

APA, Harvard, Vancouver, ISO, and other styles

7

Chen, Ying-Yu, and 陳映諭. "Micro Rotary Swaging of Metal Tubes." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/m7j65c.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>99<br>Currently most used metal capillary drawing process approach to the process of forming, when reduced to near micron size, the remaining material through the cavity of the wall dozens of grains is around this time to drawing process the process, the relationship between the size effect due to surface friction led to the relative increase in tensile stress will increase, easily lead to necking rupture. Therefore, through micro rotary swaging process instead of drawing process forming range can’t be overcome, by micro rotary swaging of forming characteristi

APA, Harvard, Vancouver, ISO, and other styles

8

Huang, Guo-Jun, and 黃國鈞. "FE Analysis of Rotary Swaging of Rods." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/54k46h.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>97<br>In sinking rods with rotary swaging, spiral defect would occur because the workpiece is subjected to tangential force caused by the swaging dies driven by spindle motor. This work investigates the effect with the aid of FEM software DEFORM 3D. The influence of reduction of area, die inclination angle, friction factor, and workpiece diameter on the formation of spiral defect, distribution of effective strain, and redundant deformation factor was analyzed. The results showed that spiral became significant with increasing reduction, decreasing die angle or

APA, Harvard, Vancouver, ISO, and other styles

9

Lin, Jun-Zhi, and 林均治. "FE Analysis of Micro Rotary Plunge-Swaging." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/h3waxh.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>98<br>The fillet of the convex die makes first contact with workpiece in the plunge-swaging process. The swaging dies are driven by a spindle and are liable to cause tangential deformation and twist on the workpiece. The workpiece would appear polygon-shape with a large fillet whereas forming defect would occur with a sharp fillet. Up to now broad reports can be found regarding the feed-in swaging process, while scarce resources are reported for the plunge-swaging process. This work aims to analyze the plunge-swaging process of wire via finite element software

APA, Harvard, Vancouver, ISO, and other styles

10

Hsu, Meng-Hsuan, and 許孟軒. "The Study of Swaging Process Optimization of Automobile Steering Shaft." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/5g97dj.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>機電整合研究所<br>101<br>After the swaging process, steering shaft of auto mobile cannot be easily fabricated with the match pieces, and the life of the spline shaft is too short. In the study, we use Taguchi methods through improving steering shaft fabricating and extending the life of the spline shaft in two stages. First, it applied L9 orthogonal array. Second, it applied L18 orthogonal array systematically to change the process parameters, for example, the swaging modes, the Feeding speed, the diameter size, the mold type, the retention period, the spindle speed, and the prevent

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Swaging"

1

Robert, Grimshaw. Grimshaw on saws: Concerning the details of manufacture, setting, swaging ... Astragal Press, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Corbin, David R. Power Swaging. Corbin Publishing, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Corbin, David R. The Handbook of Bullet Swaging, No.8. Corbin Publications, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Robert, Grimshaw. Saw Filing and Management of Saws: A Practical Treatise on Filing, Gumming, Swaging, Hammering, and Brazing Band Saws, Etc. Franklin Classics Trade Press, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

(Indonesia), Jawa Tengah, ed. Almanak Swaguna bhakti praja. Pemerintah Daerah Tingkat I Jawa Tengah, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Brown, Ruth Nicole. More than Sass or Silence. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252037979.003.0006.

Full text

Abstract:

This chapter presents a soundtrack of Black girls' expressive culture as ethnographically documented in SOLHOT in the form of original music. To think through the more dominant categorizations of how Black girls are heard, as both sassy and silent, this chapter samples Andrea Smith's (2006) “Heteropatriarchy and the Three Pillars of White Supremacy: Rethinking Women of Color Organizing” to offer a new frame called “The Creative Potential of Black Girlhood.” Music made from conversations in SOLHOT is used to emphasize how three logics of the creative potential framework, including volume/oppres

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Swaging"

1

Rotheiser, Jordan. "Staking/Swaging/Peening/Cold Heading/Cold Forming." In Joining of Plastics. Carl Hanser Verlag GmbH & Co. KG, 2009. http://dx.doi.org/10.3139/9783446445956.017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lim, Seong Joo, Kyoung Hoan Na, and C. H. Lee. "Chipless Forming Process Using Rotary Swaging Machine with Four-Dies." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-995-4.242.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lim, Seong Joo, Ho Joon Choi, Kyoung Hoan Na, and C. H. Lee. "Dimensional Characteristics of Products Using Rotary Swaging Machine with Four-Dies." In Solid State Phenomena. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-31-0.1645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kim, Byung Tak, Seon Jin Kim, Sung Wi Koh, and H. J. Kim. "Mechanical Behaviors of a Power Steering Hose Assembly during the Swaging Process." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.2822.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lim, Seong Joo, Ho Joon Choi, Duk Jae Yoon, Ha Guk Jeong, and C. H. Lee. "Product Geometry for Process Parameter during Rotary Swaging Process as Chipless Forming Process." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-431-6.439.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hoche, Holger, Fabian Jaeger, Alessandro Franceschi, Matthias Oechsner, and Peter Groche. "Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging." In Forming the Future. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_190.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kluy, L., F. Chi, and P. Groche. "Equal-Channel-Angular-Swaging for the Production of Medical Implants Made of Fine-Grained Titanium." In Lecture Notes in Production Engineering. Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-62138-7_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Charni, Dhia, Svetlana Ishkina, Jérémy Epp, Marius Herrmann, Christian Schenck, and Bernd Kuhfuss. "Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars." In Forming the Future. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hupalo, Marcio Ferreira, Angelo Fernando Padilha, and Hugo Ricardo Zschommler Sandim. "Texture and Microstructure Evolution during Cold Swaging and Recrystallization of Oligocrystalline INCOLOY^® MA 956." In Solid State Phenomena. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/3-908451-09-4.315.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Atak, Ahmet. "How Impact the Design of Aluminum Swaging Circle Fitting on the Sealing for Piping Systems: Analytical and Numerical Model." In Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99938.

Full text

Abstract:

Installation and repair of hydraulic installations are carried out by joining the pipes in the field. Pipe connections in aviation are made in a very narrow space and field. For this reason, fitting swaging method is used to connect the fittings to the pipes with a hydraulic hand tool. The basis for developing a swaging tool is knowledge of the design parameters for the plastic deformation of the swaging circle fitting. In addition to the design parameter, pipes have to be joined in cryogenic vacuum conditions, which require sealing in such sensitive and harsh conditions. In this study, the effect of swaged circle fitting designs on tightness and strength was determined and different swaging methods were examined for its improvement. Different geometric swaged circle fittings are designed and analytical and numerical models are solved. The solution results obtained show the characteristic effect of the fitting swaging analysis methodology and the swaged circle fitting design on the sealing of the pipe joint. The innovation is mainly the effect of the swaging circle connection design on the sealing of the pipe joint. With the finding in this work, it is now possible to develop or develop new tools for engineered swaging circle fitting.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Swaging"

1

Luc, Guillaume, and Philippe Le Vacon. "Swaging End Effector." In Aerospace Technology Conference and Exposition. SAE International, 2009. http://dx.doi.org/10.4271/2009-01-3246.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gibson, Michael C., Amer Hameed, and John G. Hetherington. "Investigation of Residual Stress Development During Swage Autofrettage, Using Finite Element Analysis." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13289.

Full text

Abstract:

Swaging is one method of autofrettage, a means of pre-stressing high-pressure vessels to increase their fatigue lives and load bearing capacity. Swaging achieves the required deformation through physical interference between an oversized mandrel and the bore diameter of the tube, as it is pushed through the tube. A Finite Element model of the swaging process was developed, in ANSYS, and systematically refined, to investigate the mechanism of deformation and subsequent development of residual stresses. A parametric study was undertaken, of various properties such as mandrel slope angle, paralle

APA, Harvard, Vancouver, ISO, and other styles

3

Mu, Dong, Qi Zhang, Fei Zeng, and Fengjun Wang. "Stress State and Deformation Pattern During the Infeed Swaging of Tube Without Mandrel." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50939.

Full text

Abstract:

Infeed swaging is a type of rotary swaging process. It is usually used to reduce the cross section from the beginning to the end of the tube. Compared with the infeed swaging with mandrel, the infeed swaging without mandrel has the advantages of less-loading, chipless forming, giving high production rate and low tool costs. It has been widely used in aeronautic and automotive industries. In this paper, using the finite element (FE) simulation code, TRANSVALOR FORGE 2011, three-dimensional (3D) FE model and experiment were developed to investigate the stress state and deformation pattern during

APA, Harvard, Vancouver, ISO, and other styles

4

Athena Jiao, Zhiyong Liu, Ling Pan, and Ming Ying. "Swaging force control in drive resonance response." In 2009 Asia-Pacific Magnetic Recording Conference (APMRC). IEEE, 2009. http://dx.doi.org/10.1109/apmrc.2009.4925409.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Herrmann, Marius, Yang Liu, Christian Schenck, Bernd Kuhfuss, and Inken Ohlsen. "Evolution of heat in dry rotary swaging." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Author(s), 2017. http://dx.doi.org/10.1063/1.5008098.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Herrmann, Marius, Christian Schenck, and Bernd Kuhfuss. "Dry rotary swaging with structured and coated tools." In PROCEEDINGS OF THE 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5035037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ishkina, Svetlana, Christian Schenck, and Bernd Kuhfuss. "Conditioning of material properties by micro rotary swaging." In PROCEEDINGS OF THE 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5035039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Yang, Marius Herrmann, Christian Schenck, and Bernd Kuhfuss. "Plastic deformation history in infeed rotary swaging process." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Author(s), 2017. http://dx.doi.org/10.1063/1.5008093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Brown, Tim, John Hartmann, Peter Zieve, and Mark Woods. "Evaluation of the EMR for Swaging Collars on Advanced Composite Laminates." In Aerospace Technology Conference and Exposition. SAE International, 2005. http://dx.doi.org/10.4271/2005-01-3299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bella, Edmund L. "Precision Rotary Swaging Transfer Lines for the Automatic Production of Tubular Automotive Components." In International Congress & Exposition. SAE International, 1990. http://dx.doi.org/10.4271/900296.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Swaging"

1

Richins, W. D., and G. K. Miller. Analysis of the ATR fuel element swaging process. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/197145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!