Log in

Relevant bibliographies by topics / Switching design / Journal articles

To see the other types of publications on this topic, follow the link: Switching design.

Journal articles on the topic 'Switching design'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Switching design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

de C. Gomes, Evandro, Luiz Antonio de Souza Ribeiro, João V. M. Caracas, Sebastian Y. C. Catunda, and Robert D. Lorenz. "State space decoupling control design methodology for switching converters." Eletrônica de Potência 17, no. 1 (2012): 456–65. http://dx.doi.org/10.18618/rep.2012.1.456465.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gao, Qiang, Matti Linjama, Miika Paloniitty, and Yuchuan Zhu. "Investigation on positioning control strategy and switching optimization of an equal coded digital valve system." Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 234, no. 8 (2019): 959–72. http://dx.doi.org/10.1177/0959651819884749.

Full text

Abstract:

This article concerns high accuracy positioning control with switching optimization for an equal coded digital valve system. Typically, pulse number modulation control cannot realize micro-positioning due to the characteristics of step-wise flow variation, therefore, a new position controller consisting of a model-based pulse number modulation and a differential pulse width modulation strategy is proposed to control the position of a hydraulic cylinder at high and low velocity cases, respectively. In addition, in order to solve several problems caused by the pulse number modulation and differe

APA, Harvard, Vancouver, ISO, and other styles

3

Xu, Wei, Liying Yu, Gui-Hua Lin, and Zhi Guo Feng. "Optimal switching signal design with a cost on switching action." Journal of Industrial & Management Optimization 16, no. 5 (2020): 2531–49. http://dx.doi.org/10.3934/jimo.2019068.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Song, Jian Jun, Liu Sun, He Ming Zhang, and Hui Yong Hu. "Design and Implementation of High-Speed Dual-Modulus." Applied Mechanics and Materials 109 (October 2011): 271–75. http://dx.doi.org/10.4028/www.scientific.net/amm.109.271.

Full text

Abstract:

This paper presents a new enhanced phase switching 15/16 dual-modulus prescaler. One more divide-by-2 stage was employed in the design compare to the conventional phase switching architecture. Since the operating speed of phase switching circuit is obviously reduced. The inverse phase switching sequence was employed in this circuit to implement glitch-free phase switching. Further more, a dynamic load master-slave DFF was employed as the first divide-by-2 stage which can increase the operating frequency of prescaler. Measurement result shows, this dual-modulus prescaler can operate at 3GHz-200

APA, Harvard, Vancouver, ISO, and other styles

5

Xu, Ning, Erlei Li, and Xue Yang. "A Multifunctional Video Switching Matrix Design." Journal of Physics: Conference Series 2303, no. 1 (2022): 012055. http://dx.doi.org/10.1088/1742-6596/2303/1/012055.

Full text

Abstract:

Abstract The use of Video Switching Matrix can greatly improve the utilization rate of internal space such as ships and submarines. This paper designs a multifunctional video switching matrix, which can realize 16-channel HDMI and VGA video signal input and 8-channel HDMI and VGA video signal output function. It can meet the complex scenes of HDMI and VGA integrated video input and output. This design realizes the conversion of input and output video formats through the front-end HDMI to VGA unit and the back-end VGA to HDMI unit. The middle RGB switching matrix is used to realize 16 input and

APA, Harvard, Vancouver, ISO, and other styles

6

Sewell, Tazden, Jared Padayachee, and Glen C. Snedden. "Non-linear AUV Controller Design Using Logic-Based Switching PID Control." International Journal of Mechanical Engineering and Robotics Research 13, no. 2 (2024): 227–40. http://dx.doi.org/10.18178/ijmerr.13.2.227-240.

Full text

Abstract:

The inspection of pipes without stopping pipeline operations is of industrial interest due to the inherent economic benefits. A pipe inspection robot design is proposed together with a suitable motion controller. The proposed robot is an Autonomous Underwater Vehicle (AUV) architecture that does not require shunting, draining or unearthing pipework for inspection purposes. This posed the challenge of controlling the AUV through a narrow pipe where manouvers are restricted. A set of general non-linear equations of motion were identified and refined using existing research and strip theory. The

APA, Harvard, Vancouver, ISO, and other styles

7

Shao, Zhu Lei, and San Tang. "Design and Analysis of Push-Pull Switching Power Supply on PSpice." Applied Mechanics and Materials 336-338 (July 2013): 1186–89. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.1186.

Full text

Abstract:

Aiming at the problem of switching power supply stable output, a push-pull switching power supply was designed. the switching frequency is 100kHZ and the output voltage is 5V. System model of the push-pull switching power supply is established on PSpice, and research on the output performance of the push-pull switching power supply. By the parameter sweep analysis of load, the push-pull switching power supply can stabilize output in full load and light load conditions, and load regulation rate comply with the design requirements.

APA, Harvard, Vancouver, ISO, and other styles

8

Nechaev, Vladimir, Oleg Kravchenko, and Vladimir Ulyanov. "Methods of design a multiport measurements." ITM Web of Conferences 30 (2019): 11009. http://dx.doi.org/10.1051/itmconf/20193011009.

Full text

Abstract:

The main implementation options for multiport RF and microwave measurements using n-port vector network analyzers, as well as switching measuring expansion units, are considered. A switching measuring unit and a port expander unit manufactured are presented by RPC Micran.

APA, Harvard, Vancouver, ISO, and other styles

9

Yang, Fang, Zhao Hui Liu, and Jian Wei Zhang. "Design of Resonant Soft-Switching Grid-Connected Inverter." Applied Mechanics and Materials 263-266 (December 2012): 43–47. http://dx.doi.org/10.4028/www.scientific.net/amm.263-266.43.

Full text

Abstract:

This paper discusses the topology requirements of the small power photovoltaic grid-connected inverter,and introduces several typical topologies,moreover,points out the advantages and disadvantages,efficiency and applicable occasions of the various topologies. In this paper,a single-phase full-bridge grid-connected inverter topology(DC/AC) is designed. The soft-switching technology is employed on the topology for reducing switching loss. The topology can realizes zero voltage switching when the main switch turns on and turns off and zero current switching when auxiliary switch and the power di

APA, Harvard, Vancouver, ISO, and other styles

10

Ab Halim, Mohd Firdaus Mohd. "Flux Switching Machine: Design Variation Review." International Journal of Advanced Trends in Computer Science and Engineering 9, no. 2 (2020): 2422–30. http://dx.doi.org/10.30534/ijatcse/2020/228922020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Zhang Jin, 张瑾, 徐世中 Xu Shizhong, 王晟 Wang Sheng, and 王雄 Wang Xiong. "Design of Hybrid Optical Switching Network." Laser & Optoelectronics Progress 47, no. 6 (2010): 060602. http://dx.doi.org/10.3788/lop47.060602.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Dennard, R. H., F. H. Gaensslen, L. Kuhn, and H. N. Yu. "Design of micron MOS switching devices." IEEE Solid-State Circuits Society Newsletter 12, no. 1 (2007): 35. http://dx.doi.org/10.1109/n-ssc.2007.4785541.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Kiessler, Peter C. "Stochastic Switching Systems: Analysis and Design." Journal of the American Statistical Association 103, no. 481 (2008): 430. http://dx.doi.org/10.1198/jasa.2008.s221.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Yajima, T., and K. Suda. "Switching System Software Design for ISDN." IEEE Journal on Selected Areas in Communications 4, no. 8 (1986): 1222–29. http://dx.doi.org/10.1109/jsac.1986.1146474.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Deb, Manan, and Dibakar Sen. "Design of double toggle switching mechanisms." Mechanism and Machine Theory 71 (January 2014): 163–90. http://dx.doi.org/10.1016/j.mechmachtheory.2013.09.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Koumboulis, Fotis N., Dimitrios G. Fragkoulis, Nikolaos D. Kouvakas, and Aikaterini Feidopiasti. "Soft Sensor Design via Switching Observers." Sensors 23, no. 4 (2023): 2114. http://dx.doi.org/10.3390/s23042114.

Full text

Abstract:

The goal of the paper is the design of soft sensors for single input single output (SISO) nonlinear processes. This goal is of essential importance for process monitoring, fault detection and fault isolation. The observer-based technique, being a fruitful direction in soft sensor design, is followed to develop soft sensors for nonlinear processes with known dynamics and unknown physical parameters. A new and general approach, based on the identified I/O linear approximant system descriptions, around prespecified operating points, and a bank of switching linear observers, will be developed. The

APA, Harvard, Vancouver, ISO, and other styles

17

Huang, Songtao, Jie Ye, Haozhe Wang, Baojin Li, Anwen Shen, and Junli Deng. "Switching harmonic suppression design based on multi-objective optimization algorithm with constraint processing." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 39, no. 4 (2020): 899–913. http://dx.doi.org/10.1108/compel-12-2019-0489.

Full text

Abstract:

Purpose Traditional switching harmonic suppressor design methods require domain experts to adjust design parameters due to various complex performance requirements and practical limitations in switching ripple suppressor designs. The purpose of this paper is to present a method for filter parameter design. Design/methodology/approach An improved non-dominated sorting genetic algorithm II (NSGA II) was used in the inductor-capacitor-inductor (LCL) filter design to find the optimal design parameters, and a method was proposed to handle the constraints by transforming the them into decision varia

APA, Harvard, Vancouver, ISO, and other styles

18

Cai, Hong Zhuan, and Li Bai. "The Design of 5V/100W High Frequency Switching Power Supply." Advanced Materials Research 834-836 (October 2013): 1221–24. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1221.

Full text

Abstract:

Switching power supply is an important field of application of power electronic technology, the high frequency switching DC power supply with high efficiency, small size, light weight and other advantages obtain the widespread application. The application of synchronous rectifier technology, photoelectric coupling isolation technology and the active clamp forward converter design high frequency switching power supply with 16~40V DC input and 5V/100W DC output . its operational principle is analyzed, and using LM5026 control chip describes design method of switching power supply.

APA, Harvard, Vancouver, ISO, and other styles

19

Juliadnyana, I. G., I. W. Suarnajaya, and D. P. Ramendra. "The Analysis of Teachers’ Code Switchings Based on The Perceptions of The Eighth Grade Students of SMP Negeri 2 Sawan." Journal of Education Research and Evaluation 4, no. 2 (2020): 158. http://dx.doi.org/10.23887/jere.v4i2.24919.

Full text

Abstract:

This research aimed to identify the types of code switching and the students’ perception about code switching used by the English teachers in the eighth grade students of SMP Negeri 2 Sawan. This research was conducted in descriptive qualitative design. The subjects of this research were the eighth grade students and the eighth grade English teachers. The instruments used in this study were observation sheet, questionnaire, and interview guide. The results of this research showed that there were three types of code switching used by the English teachers. The data showed there were (31.7%) of i

APA, Harvard, Vancouver, ISO, and other styles

20

Shao, Zhu Lei. "Design of a High Voltage Switching Power Supply with Soft Switching Technology." Applied Mechanics and Materials 536-537 (April 2014): 1493–96. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.1493.

Full text

Abstract:

Aiming at the application requirements of miniaturization and energy saving in the field of high voltage power supply, a high voltage switching power supply with soft switching technology was designed. The soft switch technology which makes the loss of switch power supply decrease obviously,and the dual voltage rectifier technology can effectively reduce the volume of switching power supply. Circuit parameters of switching power supply are optimized in order to further improve the efficiency of power supply. From the experiment results, the high voltage switching power supply meets the design

APA, Harvard, Vancouver, ISO, and other styles

21

Sankara Babu, T., and Ch Anil Kumar. "Design and Simulation of 7-Level Inverter Topology with Fundamental Switching Control." International Journal of Scientific Engineering and Research 4, no. 1 (2016): 47–51. https://doi.org/10.70729/8011601.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Shalo, Thanga Dinah, and Dr.V.Jeyalakshmi. "Bypassing Multiplier Design Techniques for Detecting Aging Effect." International Journal of Innovative Science and Research Technology 7, no. 5 (2022): 1574–78. https://doi.org/10.5281/zenodo.6787412.

Full text

Abstract:

In latest years, the requirement for portable digital gadgets are gaining greater interest. Transportable gadgets are demanding for low power. Multipliers play a crucial role in maximum of the DSP implementations. Thereupon it has become predominant to layout multipliers utilizing much little power hence improve the speed of the process. The major intention is in lowering both the switching interest as well as dynamic power depletion. Consequently the advanced multiplier design would lower switching interest in addition to dynamic power depletion. The various types of bypass multiplier is the

APA, Harvard, Vancouver, ISO, and other styles

23

Kani, Dr N. Ismayil, and Dr B. V. Manikandan. "A Comprehensive Study on DC to DC Converter Using M-Type Resonant Switching Topology." International Journal for Research in Applied Science and Engineering Technology 13, no. 1 (2025): 2096–102. https://doi.org/10.22214/ijraset.2025.66684.

Full text

Abstract:

Abstract: Advanced topologies for DC to DC converters have been required due to the growing need for small and highly efficient power conversion systems. An M-Type resonant switching topology, which provides notable increases in efficiency, switching losses, and electromagnetic interference (EMI) mitigation, is thoroughly analyzed and implemented in this study. The suggested design improves overall system performance by reducing power consumption during transitions by utilizing zerocurrent switching (ZCS) and zero-voltage switching (ZVS) approaches. To examine the resonant behavior of the circ

APA, Harvard, Vancouver, ISO, and other styles

24

高, 平. "A Switching Controller Design Method Based on the State-Dependent Switching Rule." Operations Research and Fuzziology 13, no. 02 (2023): 550–56. http://dx.doi.org/10.12677/orf.2023.132054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Tang, Yu, and Gang Wu. "Design of Switch Transformer about Half Bridge Switching Power Supply." Advanced Materials Research 986-987 (July 2014): 1799–803. http://dx.doi.org/10.4028/www.scientific.net/amr.986-987.1799.

Full text

Abstract:

Half bridge switching power supply is a kind of form in the family. It has the characteristics of good voltage output, high efficiency, the simple circuit and so on. On the design of the half bridge switching power supply, the key and difficult point is the design of switch transformer. Taking the switch transformer of a half bridge switching power supply as the research object and based on the design requirements, this paper aims to realize the calculation of the coil turns and the selection of core in switching transformer. the design of switch transformer of the push-pull switch power suppl

APA, Harvard, Vancouver, ISO, and other styles

26

OWOJORI, ADEDOTUN O., ABIODUN M. AKINBOLADE, and KAYODE F. AKINGBADE. "DESIGN ANALYSIS OF AN AUTOMATIC PHASE SELECTOR." Journal of Engineering Studies and Research 27, no. 3 (2022): 51–63. http://dx.doi.org/10.29081/jesr.v27i3.288.

Full text

Abstract:

Power instability in Nigeria caused by overbearing demand of power by consumers and lack of proper maintenance of the power system devices among others has brought about the need for alternative power sources such as generators, solar, typical inverters and other alternative supplies which requires one form of switching or the other to achieve phase selection during power failure. This paper gives a design analysis of an automatic phase selector linking available power supplies, that is; switching between a three-phase public utility supply, as a result of total power outage in the public supp

APA, Harvard, Vancouver, ISO, and other styles

27

Zhou, Mu Dan. "Design of a Low-Power Flyback Switching Power Supply." Applied Mechanics and Materials 734 (February 2015): 921–24. http://dx.doi.org/10.4028/www.scientific.net/amm.734.921.

Full text

Abstract:

This paper designs a low-power flyback switching power supply using current-mode PWM control chip UC3843. The design of control circuit and high-frequency transformer’s parameters of single-ended flyback converter is given. Simulation model of switching power supply is established by saber software. Simulation result shows that the power supply both have a good line regulation and load regulation with high efficiency, and verifies the correctness and feasibility of the design scheme.

APA, Harvard, Vancouver, ISO, and other styles

28

Hou, Wang, Tang, and Zhang. "Design of a RF Switch Used in Redundant Atomic Clock Configurations." Sensors 19, no. 10 (2019): 2331. http://dx.doi.org/10.3390/s19102331.

Full text

Abstract:

Atomic clocks provide frequency reference signals for communication, aerospace, satellite navigation and other systems. The redundant configuration of atomic clocks is necessary for ensuring the continuity and stability of the system. A radio frequency (RF) switch is usually used as a switching device in the switching system of the host atomic clock and the backup atomic clock. When the atomic clock fails, the switching between the host and the backup clock can be carried out quickly. Aiming at the fast switching requirements of atomic clock RF signals, this paper proposes a new series-shunt P

APA, Harvard, Vancouver, ISO, and other styles

29

Lim, Jang Kwon, Mietek Bakowski, and Hans Peter Nee. "Design and Gate Drive Considerations for Epitaxial 1.2 kV Buried Grid N-on and N-off JFETs for Operation at 250°C." Materials Science Forum 645-648 (April 2010): 961–64. http://dx.doi.org/10.4028/www.scientific.net/msf.645-648.961.

Full text

Abstract:

The 1.2 kV 4H-SiC buried-grid vertical JFET structures with Normally-on (N-on) and Normally-off (N-off) design were investigated by simulations. The conduction and switching properties were determined in the temperature range from -50°C to 250°C. In this paper, the characteristics of the N-on designs with threshold voltage (Vth) of -50 V and -10 V are compared with the N-off design (Vth=0). The presented data are for devices with the same channel length at 250°C. The results show that the on-resistance (Ron) decreases with increasing channel doping concentration and decreasing channel width. T

APA, Harvard, Vancouver, ISO, and other styles

30

Du, Fengchen, and Song Xu. "Research and design of high gain DC-DC converter based on coupled inductor." Journal of Physics: Conference Series 2918, no. 1 (2024): 012029. https://doi.org/10.1088/1742-6596/2918/1/012029.

Full text

Abstract:

Abstract A high-gain DC-DC converter with soft-switching characteristics is proposed to meet the application requirements of new energy transportation and power systems. By using a coupled inductor boost structure and adding a voltage doubling unit, the boost capability of the converter is further enhanced. By constructing a resonant cavity, the switching transistor can operate in ZVS (Zero Voltage Switching), and all diodes can operate in ZCS (Zero Current Switching), significantly reducing device losses. The coupled inductor boost structure can achieve a higher voltage output at a lower swit

APA, Harvard, Vancouver, ISO, and other styles

31

Zhang, Shao Rong, Zhi Li, and Ai Jun Zhu. "FPGA-Based High Precision and Low EMI Switching Power Supply Design." Applied Mechanics and Materials 496-500 (January 2014): 1442–47. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.1442.

Full text

Abstract:

We analyze the reasons why DC-DC switching power supply generates the electromagnetic interference (EMI), and through the FPGA control the digital-to-analog converter (DAC) to output the pulse width modulation (PWM) signal with high precision and slew rate controlled, the slew rates of the voltage and current of external N-channel MOSFET are controlled. So, dv/dt and di/dt can be decreased in the circuit; and the ripple noise and EMI of switching power supply are reduced vastly in this way. Experimental results show that the ripple noise of switching power supply could be reduced by 80% and EM

APA, Harvard, Vancouver, ISO, and other styles

32

Samarth, Kulkarni, and B. Ramesh K. "Design and Implementation of Context Switching Through Register Management." Journal of Advancement in Communication System 7, no. 3 (2024): 17–24. https://doi.org/10.5281/zenodo.13734681.

Full text

Abstract:

<em>In multitasking operating systems, context switching efficiency is critical because the system needs to switch between running multiple processes quickly in order to maintain responsiveness and best use of available resources. Registers are essential parts of the CPU and are essential to context switching. This study investigates a number of methods and approaches designed to maximize context switching through intelligent register management. We review the current methods, such as context-aware register allocation, register check pointing, and register renaming. We also suggest new approac

APA, Harvard, Vancouver, ISO, and other styles

33

Youn, Jong Hee M., Dae Jin Park, Jeong Hun Cho, and Doo San Cho. "Instruction Format Design for Low Power Embedded Systems." Applied Mechanics and Materials 789-790 (September 2015): 829–32. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.829.

Full text

Abstract:

Embedded systems demand to take high performance while executing on batteries. In such environment, the systems must be optimized with available technique to reduce energy consumption while not sacrificing performance. Especially, in mobile devices, power consumption is an important design constraint. Switching activity accounts for over 90% of total power consumption in a digital circuit. In this paper, we describe an approach to design instruction format for low power instruction fetch. The proposed method reduces switching activity of the instruction fetch logic by using a heuristic that mi

APA, Harvard, Vancouver, ISO, and other styles

34

Sasikumar, Renjith, Lakshmi Ganapathi Kolla, Durgamadhab Misra, and Revathy Padmanabhan. "(Invited) Design and Modeling of Resistive Switching Devices for Neuromorphic Applications." ECS Meeting Abstracts MA2023-01, no. 29 (2023): 1782. http://dx.doi.org/10.1149/ma2023-01291782mtgabs.

Full text

Abstract:

Resistive switching devices are a critical component for the realization of computational systems that mimic biological neural systems. In biological systems, connection weights between the neurons are dependent on the time lapse between the neurons’ action potentials. Resistive switching devices (memristors) with multiple conductance states can mimic this biological spike-time-dependent plasticity (STDP) behaviour, with multiple conductance states being analogous to different synaptic weights. Additionally, memristors are one of the contenders as storage elements in non-volatile memories. The

APA, Harvard, Vancouver, ISO, and other styles

35

Ohtake, Hiroshi, and Kazuo Tanaka. "Switching Fuzzy Model Construction and Controller Design for Dynamical Systems with Input Nonlinearity." Journal of Advanced Computational Intelligence and Intelligent Informatics 12, no. 6 (2008): 537–45. http://dx.doi.org/10.20965/jaciii.2008.p0537.

Full text

Abstract:

Fuzzy model-based control mainly deals with dynamical systems which affinely depend on control inputs. In this paper, dynamical systems which is permitted to have nonlinearity not only in the states, but also in the inputs is considered. Input nonlinearity makes a nonlinear system complicated and makes the number of fuzzy model rules increase. Thus, switching fuzzy control approach is employed. Firstly, the switching fuzzy model construction with arbitrary linear dividing planes, which is an extension of the ordinary switching fuzzy model construction method with dividing planes corresponding

APA, Harvard, Vancouver, ISO, and other styles

36

Himmelstoss, Felix, Ali Riza Derin, and Mihai Cernat. "Boost Converter with Active Snubber Network." Advances in Electrical and Computer Engineering 17, no. 1 (2017): 55–60. https://doi.org/10.5281/zenodo.3457894.

Full text

Abstract:

A new concept for reducing the losses in a boost converter is described. With the help of an auxiliary switch and a resonant circuit,  zero-voltage switching at turn-off and zerocurrent switching during turn-on are achieved. The modes of the circuit are shown in  detail. The energy recovery of the turn-off is analyzed and the recovered energy is calculated; an optimized switching concept  therefore is described. The influence of the parasitic capacity of the switch is discussed. Dimensioning hints for the converter and the design of the&nb

APA, Harvard, Vancouver, ISO, and other styles

37

Liefooghe, Baptist, Jelle Demanet, and André Vandierendonck. "Short Article: Is Advance Reconfiguration in Voluntary Task Switching Affected by the Design Employed?" Quarterly Journal of Experimental Psychology 62, no. 5 (2009): 850–57. http://dx.doi.org/10.1080/17470210802570994.

Full text

Abstract:

In task switching, when the amount of preparation time is increased, a reduction in switch cost or RISC effect is observed. This RISC effect is frequently attributed to advance reconfiguration processes. In the explicit task-cueing procedure, RISC effects are observed when varying the preparation time within participants but not when varying the preparation time across participants—a finding suggesting that RISC effects in the explicit task-cueing procedure are restricted to specific designs. The present study investigated RISC effects in voluntary task switching and compared RISC effects in a

APA, Harvard, Vancouver, ISO, and other styles

38

Liang, Yuhua, and Zhangming Zhu. "An Energy-Efficient Switching Scheme for Low-Power SAR ADC Design." Journal of Circuits, Systems and Computers 27, no. 01 (2017): 1850015. http://dx.doi.org/10.1142/s0218126618500159.

Full text

Abstract:

A novel energy-efficient switching scheme for successive approximation register (SAR) analog-to-digital converters (ADC) is proposed in this paper. The average switching energy of the proposed switching scheme can be reduced by 95.3%, compared with the [Formula: see text]-based scheme. Moreover, the linearity has been also improved significantly. Employing the proposed switching scheme, a 10-bit 100[Formula: see text]kS/s SAR ADC is designed in SMIC 0.18-[Formula: see text]m CMOS process. At a 0.6-V supply, the ADC consumes 43.7[Formula: see text]nW. Consequently, the figure-of-merit (FOM) is

APA, Harvard, Vancouver, ISO, and other styles

39

Raghavendran, S., B. Chitti Babu, and Luigi Piegari. "Analysis, Design and Experimental Validation of Modified Simple Soft Switching DC-DC Boost Converter." International Journal of Emerging Electric Power Systems 16, no. 4 (2015): 331–37. http://dx.doi.org/10.1515/ijeeps-2015-0013.

Full text

Abstract:

Abstract This paper investigates a modified simple soft switching dc-dc converter for low power applications. This simple topology uses an auxiliary switch, an inductor and a capacitor to operate the converter without switching losses. The efficiency of the converter is improved by transferring the energy that would be dissipated during the switching to the load. The main switch turns-on with zero current switching (ZCS) and turns-off with zero voltage switching (ZVS), while the auxiliary switch turns-on and turns-off with zero voltage switching (ZVS). The detailed theoretical analysis and the

APA, Harvard, Vancouver, ISO, and other styles

40

Liu, An, Hai Zhang, Wei Yang, and Shun Xia Cao. "Design of Switching Power Supply in High Performance Switches." Applied Mechanics and Materials 556-562 (May 2014): 1520–25. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.1520.

Full text

Abstract:

A switching power supply of high performance switches is designed in this thesis, which is able to supply stable power energy to switches. In the paper, I analyze the characteristic of switches load, and analyze the main circuit structure based on the study of basic principle of switches switching power supply. As a key point, I have designed a main circuit which adopts flyback Topological structure, such as, input circuit, rectification filter circuit, output circuit, feedback circuit, ancillary circuit of switches switching power supply and high-frequency transformer. The result of design is

APA, Harvard, Vancouver, ISO, and other styles

41

AHMAD, Mohd Ashraf, Shun-ichi AZUMA, Ichiro BABA, and Toshiharu SUGIE. "Switching Controller Design for Hybrid Electric Vehicles." SICE Journal of Control, Measurement, and System Integration 7, no. 5 (2014): 273–82. http://dx.doi.org/10.9746/jcmsi.7.273.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Mouftah, Hussein T. "Design of all Optical Packet Switching Networks." Sultan Qaboos University Journal for Science [SQUJS] 7, no. 1 (2002): 1. http://dx.doi.org/10.24200/squjs.vol7iss1pp1-10.

Full text

Abstract:

Optical switches and wavelength converters are recognized as two of the most important DWDM system components in future all-optical networks. Optical switches perform the key functions of flexible routing, reconfigurable optical cross-connect (OXC), network protection and restoration, etc. in optical networks. Wavelength Converters are used to shift one incoming wavelength to another outgoing wavelength when this needs to be done. Always residing in optical switches, they can effectively alleviate the blocking probability and help solve contention happening at the output port of switches. The

APA, Harvard, Vancouver, ISO, and other styles

43

Turner, J. S. "Design of a broadcast packet switching network." IEEE Transactions on Communications 36, no. 6 (1988): 734–43. http://dx.doi.org/10.1109/26.2794.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

CHANDRASEKARAN, SRIRAM, DOUGLAS K. LINDNER, and RALPH C. SMITH. "Optimized Design of Switching Amplifiersfor Piezoelectric Actuators." Journal of Intelligent Material Systems and Structures 11, no. 11 (2000): 887–901. http://dx.doi.org/10.1106/xfc7-pd82-ldfc-t2r9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Kam, Hei, Tsu-Jae King Liu, and Elad Alon. "Design Requirements for Steeply Switching Logic Devices." IEEE Transactions on Electron Devices 59, no. 2 (2012): 326–34. http://dx.doi.org/10.1109/ted.2011.2175484.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Jian, Xue, Zhang Xiao-Qing, Liu Xin, and Li Shu-Peng. "Design Considerations of Step-Down Switching Converters." Procedia Engineering 24 (2011): 100–105. http://dx.doi.org/10.1016/j.proeng.2011.11.2609.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Chow, Shein-Chung, and Sang Joon Lee. "Design and Analysis of Biosimilar Switching Studies." Pharmaceutical Medicine 33, no. 5 (2019): 379–88. http://dx.doi.org/10.1007/s40290-019-00296-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Yong Liu. "Switching observer design for uncertain nonlinear systems." IEEE Transactions on Automatic Control 42, no. 12 (1997): 1699–703. http://dx.doi.org/10.1109/9.650020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Petrone, G., and G. Spagnuolo. "Tolerance design of controllers for switching regulators." IEEE Transactions on Aerospace and Electronic Systems 40, no. 2 (2004): 661–74. http://dx.doi.org/10.1109/taes.2004.1310012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Yin, Wanjun, ZhengFeng Ming, and Tao Wen. "Switching power supply EMC optimisation design method." Electronics Letters 56, no. 16 (2020): 813–16. http://dx.doi.org/10.1049/el.2020.1086.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!