Log in

Relevant bibliographies by topics / Synchronous buck dc-dc converter

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Synchronous buck dc-dc converter'

Author: Grafiati

Published: 4 June 2021

Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Synchronous buck dc-dc converter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Synchronous buck dc-dc converter"

1

Hwang, In Hwan, In Soo Lee, and Kwang Tae Kim. "High Efficiency 5A Synchronous DC-DC Buck Converter." Journal of Korea Multimedia Society 19, no. 2 (2016): 352–59. http://dx.doi.org/10.9717/kmms.2016.19.2.352.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sreedhar, Jadapalli, and B. Basavaraja. "Plan and analysis of synchronous buck converter for UPS application." International Journal of Engineering & Technology 7, no. 1.1 (2017): 679. http://dx.doi.org/10.14419/ijet.v7i1.1.10827.

Full text

Abstract:

DC-DC converters occupies very significant role in the field of industries or daily life applications. To charge batteries of low voltage connected to uninterrupted power supply (UPS), DC-DC converters are needed. Batteries requires low voltage and the available voltage at the source is to be step-down to the required level of voltage at the point of utility (PoU). While designing DC-DC converters, efficiency and simplicity of the circuit is very much important. Simply for the UPS applications, Buck converter can deliver the voltage at required level which is very simple in operation but the increased losses in diode can be addresses by using a synchronous Buck converter. By using synchronous Buck converter, the diode conduction losses in Buck converter can be minimized, thus improving the efficiency of the converter. In this paper, Synchronous Buck converter is used to charge the batteries of UPS. In this paper Design, modeling of synchronous Buck converter for UPS application was done and its results were obtained by using Matlab/Simulink. A hardware prototype was also developed and the hardware results were also shown.

APA, Harvard, Vancouver, ISO, and other styles

3

Ribes-Mallada, U., R. Leyva, and P. Garcés. "Optimization of DC-DC Converters via Geometric Programming." Mathematical Problems in Engineering 2011 (2011): 1–19. http://dx.doi.org/10.1155/2011/458083.

Full text

Abstract:

The paper presents a new methodology for optimizing the design of DC-DC converters. The magnitudes that we take into account are efficiency, ripples, bandwidth, and RHP zero placement. We apply a geometric programming approach, because the variables are positives and the constraints can be expressed in a posynomial form. This approach has all the advantages of convex optimization. We apply the proposed methodology to a boost converter. The paper also describes the optimum designs of a buck converter and a synchronous buck converter, and the method can be easily extended to other converters. The last example allows us to compare the efficiency and bandwidth between these optimal-designed topologies.

APA, Harvard, Vancouver, ISO, and other styles

4

Abdessamad, Benlafkih. "A Low Voltage Dynamic Synchronous DC-DC Buck Converter." International Journal of Sensors and Sensor Networks 5, no. 2 (2017): 22. http://dx.doi.org/10.11648/j.ijssn.20170502.11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rabina, T. Alfa, P. Priyanka Darling Rosita, S. Ramesh, N. Ramani, and N. Ramani. "SYNCHRONOUS BUCK DC DC CONVERTER USING FIREFLY OPTIMIZATION ALGORITHM." INTERNATIONAL JOURNAL OF RECENT TRENDS IN ENGINEERING & RESEARCH 05, Special Issue 07 (2019): 15–20. http://dx.doi.org/10.23883/ijrter.conf.20190304.003.fwkkr.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Soman, Sarun, and Sangeetha T.S. "Development of Digital Controller for DC-DC Buck Converter." International Journal of Power Electronics and Drive Systems (IJPEDS) 6, no. 4 (2015): 788. http://dx.doi.org/10.11591/ijpeds.v6.i4.pp788-796.

Full text

Abstract:

This paper presents a design &amp; implementation of 3P3Z (3-pole 3-zero) digital controller based on DSC (Digital Signal Controller) for low voltage synchronous Buck Converter. The proposed control involves one voltage control loop. Analog Type-3 controller is designed for Buck Converter using standard frequency response techniques.Type-3 analog controller transforms to 3P3Z controller in discrete domain.Matlab/Simulink model of the Buck Converter with digital controller is developed. Simualtion results for steady state response and load transient response is tested using the model.

APA, Harvard, Vancouver, ISO, and other styles

7

Ling, Rui, Dragan Maksimovic, and Ramon Leyva. "Second-Order Sliding-Mode Controlled Synchronous Buck DC–DC Converter." IEEE Transactions on Power Electronics 31, no. 3 (2016): 2539–49. http://dx.doi.org/10.1109/tpel.2015.2431193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shenai, Krishna, and Krushal Shah. "Design of High-Performance Synchronous Buck DC-DC Converters Using GaN Power HEMTs." Materials Science Forum 717-720 (May 2012): 1307–10. http://dx.doi.org/10.4028/www.scientific.net/msf.717-720.1307.

Full text

Abstract:

Simple, physics-based, and accurate circuit models are reported for GaN power HEMTs and inductors; these models are then used to design high-performance chip-scale synchronous buck (SB) power converters to provide agile point-of-load (POL) low-voltage ( down to 1V) high-current (up to 10A) power to portable mobile devices from a battery. Excellent agreement between the measured and simulated results is demonstrated for load regulation for a 19V/1.2V, 800 kHz SB converter; for comparison, the same converter performance using the best commercially available state-of-the-art silicon power MOSFETs is also evaluated. It is shown that the conventional approach used for estimating power loss of a SB power converter is in error; a new application-specific Figure of Merit (FOM) for power switches is proposed that accounts for both input and output switching losses.

APA, Harvard, Vancouver, ISO, and other styles

9

Jamshidpour, Ehsan, Philippe Poure, and Shahrokh Saadate. "Common Switch Fault Diagnosis for Two-Stage DC-DC Converters Used in Energy Harvesting Applications." Electronics 8, no. 3 (2019): 293. http://dx.doi.org/10.3390/electronics8030293.

Full text

Abstract:

This paper proposes a new Unified Switch Fault Diagnosis (UFD) approach for two-stage non-isolated DC-DC converters used in energy harvesting applications. The proposed UFD is compared with a switch fault diagnosis consisting of two separate fault detection algorithms, working in parallel for each converter. The proposed UFD is simpler than the two parallel fault diagnosis methods in realization. Moreover, it can detect both types of switch failures, open circuit and short circuit switch faults. It can also be used for any two-stage non-isolated DC-DC converters based on two single switch converters, no matter the converter circuits in each stage. Some selected simulation and Hardware-in-the-Loop (HIL) experimentation results confirm the validity and efficiency of the proposed UFD. Also, the proposed UFD is applied successfully for fault-tolerant operation of a buck/buck–boost two-stage converter with synchronous control and a redundant switch.

APA, Harvard, Vancouver, ISO, and other styles

10

Lindiya, Augusti, S. Palani, and Iyyappan. "Performance Comparison of Various Controllers for DC-DC Synchronous Buck Converter." Procedia Engineering 38 (2012): 2679–93. http://dx.doi.org/10.1016/j.proeng.2012.06.315.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Synchronous buck dc-dc converter"

1

Nguyen, Huy. "Design, Analysis and Implementation of Multiphase Synchronous Buck DC-DC Converter for Transportable Processor." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/32139.

Full text

Abstract:

As laptop mobile users expect more application features and long battery life, the processor current has to increase to response the demanding while the voltage has to decease to save the power loss. Therefore, it is necessary for a system designer to improve the efficiency of the voltage regulator converter (VRC) for the processor. Laptop processor architecture is more complicated than desktop because of different mode operations and their transitions. The laptop processor runs at different voltage levels for each operation mode to save the battery life. Therefore, the VRC needs to supply the correct and stable voltage to the processor. In this thesis, an analysis of power loss is derived to estimate the efficiency and switching frequency, three widely current sensing methods are discussed, two methods to compensate for the thermal resistance in loss less current sense methods are proposed, the tolerance of load line base on the componentâ s tolerance in the converter is analyzed, the equation to estimate the output capacitance is derived, and the small signal analysis of multiphase synchronous buck converter with the droop current loop is derived. A hardware prototype was implemented base on 4-phase synchronous buck topology to provide high efficiency and lower cost solution. The results of load line meets the Intel specification in different modes of operation, provides the best transient responses, and meets the specification during the load transient. The control loop lab measurement is also matched with the analysis and simulation.<br>Master of Science

APA, Harvard, Vancouver, ISO, and other styles

2

Yeh, Chih-Shen. "Synchronous-Conduction-Mode Tapped-Inductor Buck Converter for Low-Power, High-Density Application." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/81722.

Full text

Abstract:

General-purpose step-down converter is essential in electronic system for processing energy from high-voltage rail to low-voltage circuits. The applications can be found at the auxiliary supplies in automobile, industrial and communication systems. Buck converter is a common circuit topology to fulfill step-down conversion, especially in low-power application since it is well-studied and straightforward. However, it suffers from low duty cycle under high step-down condition, and typically operates in continuous conduction mode (CCM) that generates large switching loss. On the other hand, as an extension of the buck converter, tapped-inductor (TI) buck converter has larger duty cycle while maintaining the structural simplicity. Therefore, the main objective of this thesis is to explore the potential of TI buck converter as a wide conversion range, high power density and high efficiency topology for low power application. To achieve high efficiency at switching frequency of MHz-level, synchronous conduction mode (SCM) is applied for turn-on losses elimination. The operation principle and power stage design of SCM TI buck is first introduced. The design of high switching frequency coupled inductor is emphasized since its size plays a critical role in power density. Loss breakdown is also provided to perform a comprehensive topological study. Secondly, detailed zero-voltage-switching (ZVS) condition of SCM TI buck is derived so that the converter does not experience redundant circulating energy. The experimental results of 15-W SCM TI buck converter prototypes are provided with 90.7% of peak power stage efficiency. The size of coupled inductor is down to 116 mm3. To enhance light-load efficiency, a variable frequency control scheme based on derived ZVS conditions is implemented with the switching frequency ranging from 2 MHz to 2.9 MHz.<br>Master of Science<br>General-purpose step-down converter is essential in electronic system for processing energy from high-voltage rail to low-voltage circuits. The applications can be found at the auxiliary supplies in automobile, industrial and communication systems. Typically, the ultimate goals of general-purpose step-down converter are versatility, high efficiency and compact size. Recently, tapped-inductor (TI) buck converter is studied since it could overcome the drawback of commonly used buck converter under high step-down conversion. Therefore, the potential of TI buck converter as a general-purpose step-down converter candidate is explored in this thesis, including control method, hardware design, etc. The thesis verifies that TI buck converter could have compact size while remaining efficient and adaptable.

APA, Harvard, Vancouver, ISO, and other styles

3

Vičar, Ondřej. "Systém napájení s vysokou účinností pro mobilní zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221158.

Full text

Abstract:

This Master’s thesis is focused on design of voltage converter’s system operating with supply voltage of batteries. There are selected appropriate types of batteries, converter topologies and modes of their control. The specified output branches are systematically divided into three separate modules. Each module is designed in detail with focus on high efficiency. The modules are implemented and optimized. Parameter of final modules were measured and compared with correctness of design and theoretical assumptions.

APA, Harvard, Vancouver, ISO, and other styles

4

Franzén, Björn. "Designing a brushed DC motor controller : Laying the framework for a lab experiment involving position control with current feedback." Thesis, Linnéuniversitetet, Institutionen för fysik och elektroteknik (IFE), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-44169.

Full text

Abstract:

In order to provide the means to set up a control theory lab experiment involving position control of a brushed DC motor with current feedback, a pulse-width modulated motor controller was designed. The output voltage is controlled by an analog reference signal and the magnitude of the output current and voltage are measured and output. These inputs and outputs are connected to a DAQ I/O-unit such that the lab experiment can be implemented digitally. In addition, defining equations for the whole system were derived. Comparison between measurements and model showed it possible to use the current as feedback if low-pass filtered and the angular displacement controlled over a small angular interval.

APA, Harvard, Vancouver, ISO, and other styles

5

Saini, Dalvir K. "Gallium Nitride: Analysis of Physical Properties and Performance in High-Frequency Power Electronic Circuits." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1438013888.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chadha, Ankit. "Tapped-Inductor Buck DC-DC Converter." Wright State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=wright1578488939749599.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Querol, Borràs Jorge. "MCU Controlled DC-DC Buck/Boost Converter for Supercapacitors." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101205.

Full text

Abstract:

This work is focused on DC to DC conversion, what is a crucial function to enable the use of supercapacitors for energy storage. A theoretical study and comparison of methods, algorithms and techniques for software controlled DC-DC converters have been used to develop a system what can step up or down a DC variable voltage and transform it into a steady state voltage. As a result a new control theory based on Bang-Bang control has been developed with an ARM LPC1768 processor. It was implemented to solve the commercial converters problems because they cannot work with supercapacitors due to their low internal resistance. The outcome is a device what can provide a programmable voltage between 4.5 V and 25 V, hardware can support up to 6 A and it is able to control the operating current owing through the converter. It can be used with the supercapacitors as shown in this work but it can also be used as a general platform for voltage and energy conversion. Furthermore, the designed hardware has the potential to work with smart grids via Ethernet connector, solar panels with MPPT algorithms and, at last, manage energy between dierent kinds of DC voltage sources and devices.<br>Detta arbete är inriktat på DC till DC konvertering, vad är en viktig funktion för att möjliggöra användningen av superkondensatorer för lagring av energi. En teoretisk studie och jämförelse av metoder, algoritmer och tekniker för program styrs DC-DC omvandlare har använts för att utveckla ett system vad som kan stega upp eller ner en DC variabel spänning och omvandla det till ett stabilt tillstånd spänning. Som ett resultat av en ny kontroll teori bygger på Bang-Bang kontroll har utvecklats med en ARM LPC1768 processor. Det genomfördes för att lösa de kommersiella omformare problemen eftersom de inte kan arbeta med superkondensatorer på grund av deras låga inre motstånd. Resultatet är en anordning vilken kan tillhandahålla en programmerbar spänning mellan 4,5 V och 25 V, kan hårdvaran att stödja upp till 6 A och det är möjligt att styra operativsystemet ström som flyter genom omvandlaren. Den kan användas med de superkondensatorer, såsom visas i detta arbete, men den kan också användas som en allmän plattform för spänning och energiomvandling. Dessutom har hårdvara möjlighet att arbeta med smarta nät via ethernet-uttag, solpaneler med MPPT algoritmer och äntligen, hantera energi mellan olika typer av DC spänningskällor och enheter.

APA, Harvard, Vancouver, ISO, and other styles

8

Al, Kzair Christian. "SiC MOSFET function in DC-DC converter." Thesis, Uppsala universitet, Elektricitetslära, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-415147.

Full text

Abstract:

This thesis evaluate the state of art ROHM SCT3080KR silicon carbide mosfet in a synchronous buck converter. The converter was using the ROHM P02SCT3040KR-EVK-001 evaluation board for driving the mosfets in a half bridge configuration. Evaluation of efficiency, waveforms, temperature and a theoretical comparison between a silicon mosfet (STW12N120K5) is done. For the efficiency test the converter operate at 200 V input voltage and 100 V output voltage at output currents of 7 A to 12 A, this operation was tested at switching frequencies of 50 kHz, 80 kHz and 100 kHz. The result of the efficiency test showed an efficiency of 98-97 % for 50 kHz, 97.7-96.4 % for 80 kHz and 97-96.2 % for the 100 kHz test. The temperature test shows a small difference in comparison of the best case scenario and the worst case scenario, temperature ranges from 25.5 to 33.5 °C for the high side mosfet while the low side mosfet temperature ranges from 29.8 to 35 °C. The waveform test was conducted at 50 kHz and 100 kHz for output currents of 4 A and 12 A (at 200 V input and 100 V output). The result of the waveform test shows a rise and fall time of the voltages in range of 10-12 ns while the current rise and fall time was 16 ns for the 4 A test and 20 ns for the 12 A test. Overall SiC mosfet show a clear advantage over silicon mosfet in terms of efficiency and high power capabilities.

APA, Harvard, Vancouver, ISO, and other styles

9

Lau, Wai Keung. "Current-mode DC-DC buck converter with dynamic zero compensation /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20LAU.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mai, Yuan Yen. "Current-mode DC-DC buck converter with current-voltage feedforward control /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20MAI.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Synchronous buck dc-dc converter"

1

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Synchronous buck dc-dc converter"

1

Hariri, Muhammad Hafeez Mohamed, Norizah Mohamad, and Syafrudin Masri. "Development and Implementation of Synchronous DC–DC Buck Converter for Photovoltaic Power Generation." In Lecture Notes in Electrical Engineering. Springer Singapore, 2014. http://dx.doi.org/10.1007/978-981-4585-42-2_44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Severns, Rudolf P., and Gordon Ed Bloom. "The Buck Converter." In Modern DC-to-DC Switchmode Power Converter Circuits. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-011-8085-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Severns, Rudolf P., and Gordon Ed Bloom. "Buck-Derived Circuits." In Modern DC-to-DC Switchmode Power Converter Circuits. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-011-8085-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chen, Ke-Horng. "Single-Inductor Multiple-Output DC–DC Buck Converter." In Power Management Integrated Circuits. CRC Press, 2017. http://dx.doi.org/10.1201/9781315373362-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sharma, Shubham, and Kusum Lata Agarwal. "Optimal Controller Design for DC–DC Buck Converter." In Algorithms for Intelligent Systems. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8820-4_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chiu, Chian-Song, Ya-Ting Lee, and Chih-Wei Yang. "Terminal Sliding Mode Control of DC-DC Buck Converter." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10741-2_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

A. Elbaset, Adel, and M. S. Hassan. "Small-Signal MATLAB/Simulink Model of DC–DC Buck Converter." In Design and Power Quality Improvement of Photovoltaic Power System. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-47464-9_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Sameer Kumar, M. K., Jayati Dey, and Reetam Mondal. "Fractional-Order (FO) Control of DC–DC Buck–Boost Converter." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0313-9_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wens, Mike, and Michiel Steyaert. "A Mathematical Model: Boost and Buck Converter." In Design and Implementation of Fully-Integrated Inductive DC-DC Converters in Standard CMOS. Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1436-6_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Karthikeyan, P., and V. Siva Chidambaranathan. "Bidirectional Buck–Boost Converter-Fed DC Drive." In Advances in Intelligent Systems and Computing. Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2656-7_109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Synchronous buck dc-dc converter"

1

Chen, Guipeng, Jie Dong, Yan Deng, Xiangning He, and Yousheng Wang. "Integrated dual-output synchronous DC-DC buck converter." In 2015 IEEE Energy Conversion Congress and Exposition. IEEE, 2015. http://dx.doi.org/10.1109/ecce.2015.7309875.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gowda, N. M. Mahesh, and S. S. Parthasarathy. "Optimization of synchronous buck-boost DC-DC switching converter." In 2016 IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT). IEEE, 2016. http://dx.doi.org/10.1109/rteict.2016.7807841.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sabbarapu, Bharath Kumar, Omar Nezamuddin, Andrew McGinnis, and Euzeli dos Santos. "Single-input multiple-output synchronous DC-DC buck converter." In 2016 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2016. http://dx.doi.org/10.1109/ecce.2016.7855438.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Songda Wang and Yi Wang. "Synchronous Buck DC-DC converter for ultrawide input-voltage range." In 2016 IEEE International Conference on Power and Renewable Energy (ICPRE). IEEE, 2016. http://dx.doi.org/10.1109/icpre.2016.7871197.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Deylamani, Mahnaz Janipoor, Parviz Amiri, and Mohammad Hossein Refan. "Discrete-Time Sliding Mode Controlled Synchronous DC-DC Buck Converter." In 2020 11th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC). IEEE, 2020. http://dx.doi.org/10.1109/pedstc49159.2020.9088509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lima, Floriberto, Marcelino Santos, Jose Barata, and Joao Aguiar. "Dead-Time Control System for a Synchronous Buck dc-dc Converter." In 2007 International Conference on Power Engineering, Energy and Electrical Drives. IEEE, 2007. http://dx.doi.org/10.1109/powereng.2007.4380181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hedayati, Mohammad H., Pallavi Bharadwaj, and Vinod John. "Hybrid synchronous DC-DC buck power converter using Si and GaN transistors." In 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2016. http://dx.doi.org/10.1109/pedes.2016.7914444.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Babazadeh, Amir, and Dragan Maksimovic. "Hybrid digital adaptive control for synchronous buck DC-DC converters." In 2008 IEEE Power Electronics Specialists Conference - PESC 2008. IEEE, 2008. http://dx.doi.org/10.1109/pesc.2008.4592104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Yang, Boyi, J. S. Yuan, and Z. Shen. "Reliability and failure mechanisms of lateral MOSFETs in synchronous DC-DC buck converter." In 2009 16th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA). IEEE, 2009. http://dx.doi.org/10.1109/ipfa.2009.5232551.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Joo, Soyeon, Jisoo Hwang, Eunseok Song, and SoYoung Kim. "On-chip layout optimization of synchronous DC-DC buck converter for EMI reduction." In 2017 IEEE Electrical Design of Advanced Packaging and Systems Symposium (EDAPS). IEEE, 2017. http://dx.doi.org/10.1109/edaps.2017.8277036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!