Relevant bibliographies by topics / Synthesis gas compressor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Synthesis gas compressor'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Synthesis gas compressor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Synthesis gas compressor"

1

Lelgemann, K. D. "The Design, Selection, and Application of Oil-Free Screw Compressors for Fuel Gas Service." Journal of Engineering for Gas Turbines and Power 117, no. 1 (1995): 74–80. http://dx.doi.org/10.1115/1.2812784.

Full text
Abstract:
Fuel gas compressors installed in cogeneration systems must be highly reliable and efficient machines. The screw compressor can usually be designed to meet most of the gas flow rates and pressure conditions generally required for such installations. To an ever-increasing degree, alternative sources are being found for the fuel gas supply, such as coke-oven gas, blast-furnace gas, flare gas, landfill gas, and synthesis gas from coal gasification or from pyrolysis. A feature of the oil-free screw compressor when such gases are being considered is the isolation of the gas compression space from t
APA, Harvard, Vancouver, ISO, and other styles
2

Burakov, A. V., A. A. Kotlov, and A. A. Levikhin. "Compressor equipment for enhancing efficiency of solid organic waste processing plants." Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering 5, no. 3 (2021): 54–62. http://dx.doi.org/10.25206/2588-0373-2021-5-3-54-62.

Full text
Abstract:
The article describes the experience of the Compressor holding company in the creation of compressor equipment for various industries. The use of compressors as part of complexes for the processing of organic waste in the framework of solving urgent environmental problems has been demonstrated. The process of compression of synthesis gas to increase the efficiency of the processing process has been investigated. To ensure stable parameters, reliable operation of syngas reciprocating compressors is required in wide ranges of operating parameters. Ensuring the operability of the compressor in wi
APA, Harvard, Vancouver, ISO, and other styles
3

Khalikov, Rinat Valerevich, and Vladimir Vasilievich Roenko. "Fire hazard of power plants of gas compressor stations." Technology of technosphere safety 95 (2022): 66–76. http://dx.doi.org/10.25257/tts.2022.1.95.66-76.

Full text
Abstract:
Introduction. The article analyzes the composition of power plants of gas compressor stations. A structural and logical model of the development of fires at power plants of gas compressor stations is compiled based on the analysis of real fires. The most dangerous scenario of fire development has been determined. On the basis of the branched-chain combustion theory, the necessary characteristics of the fire extinguishing composition are established and a technical scheme for implementing the fire extinguishing method is proposed. The purpose of the study is to creation of conditions for effect
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Wei Min, and Wei Zheng An. "Investigation on the Subsynchronous Vibration Fault Diagnosis and Control for Centrifugal Compressor." Applied Mechanics and Materials 34-35 (October 2010): 1488–92. http://dx.doi.org/10.4028/www.scientific.net/amm.34-35.1488.

Full text
Abstract:
Centrifugal compressors are widely used to compressor gas in many different processes within the petroleum and chemical industry. Two vibration types of concern in industrial compressors are synchronous and subsynchronous vibration. The latter, more troubling type of vibration, occurs when non-conservative whirling forces(Cross-coupling) act to excite a lateral natural frequency, which lies below the running speed(subsynchronous vibration). In this paper, more attention is paid to impellers from a rotordynamic standpoint and a synthesis gas compress in ammonia plant is analyzed in order to dia
APA, Harvard, Vancouver, ISO, and other styles
5

Khalikov, R. V. "Probabilistic model of branched-chain combustion of saturated hydrocarbons in a closed volume of gas compressor stations." Technology of technosphere safety 91 (2021): 42–52. http://dx.doi.org/10.25257/tts.2021.1.91.42-52.

Full text
Abstract:
Introduction. The article analyzes the role of thermal and chain combustion in a fire in a closed volume of gas compressor stations. The mechanism of the branched-chain combustion of saturated hydrocarbons in the gas phase has been determined. The analysis of existing models of combustion of saturated hydrocarbons is carried out. Probabilistic model of branched-chain combustion of saturated hydrocarbons in a closed volume of gas compressor stations based on the energy characteristics of the chain carriers in the branched-chain combustion process has been compiled. The purpose of the study is t
APA, Harvard, Vancouver, ISO, and other styles
6

Titov, Vladimir, and Oleg Kryukov. "Invariant Algorithms of Multiple Regression for Optimal Control of Electric Drive Technological Installations." Известия высших учебных заведений. Электромеханика 64, no. 2 (2021): 32–38. http://dx.doi.org/10.17213/0136-3360-2021-2-32-38.

Full text
Abstract:
The theoretical aspects of the development of an invariant control system for high-power automated electric drives of oil and gas pipeline facilities are considered. A generalized mathematical model of the compression process is proposed, depending on the production, structural and climatic parametric disturbances on the electric drive. The results of the synthesis and analysis of invariant control systems for changing the parameters of the main factors of technological processes are presented. Using a concrete example of a compressor station of a main gas pipeline, the possibilities of stable
APA, Harvard, Vancouver, ISO, and other styles
7

Mikhailov, Alexander, D. Mikhaylov, E. Sheiko, and V. Mikhailov. "Structural synthesis of complex multi-coherent engineering process of compressor blade processing of gas turbine engines with function-oriented coatings." Science intensive technologies in mechanical engineering 2020, no. 1 (2020): 40–48. http://dx.doi.org/10.30987/2223-4608-2020-2020-1-40-48.

Full text
Abstract:
It is shown that the compressor of a gas turbine engine consists of a group of blades which experience uneven abrasive-erosion wear characterized with unevenness of three types. To increase compressor blade life it is offered to use function-oriented coatings and to ensure their properties on the basis of the principle of equal resource. In the work there are solved the problems of a structural synthesis of a complex multi-coherent technological process of function-oriented blade group sputtering.
APA, Harvard, Vancouver, ISO, and other styles
8

DING, Liang, Tong WANG, and Chuangang GU. "Numerical Study on a High-Pressure Stage in Synthesis Gas Compressor." Journal of Thermal Science and Technology 7, no. 1 (2012): 166–79. http://dx.doi.org/10.1299/jtst.7.166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Akulinin, E. I., O. O. Golubyatnikov, A. N. Labutin, D. S. Dvoretsky, and S. I. Dvoretsky. "MODELING AND ANALYSIS OF DYNAMICS OF PRESSURE SWING ADSORPTION PROCESS FOR SYNTHESIS GAS SEPARATION AND HYDROGEN PRODUCTION." Vestnik Tambovskogo gosudarstvennogo tehnicheskogo universiteta 26, no. 3 (2020): 342–56. http://dx.doi.org/10.17277/vestnik.2020.03.pp.342-356.

Full text
Abstract:
On the basis of the Dubinin theory of micropore volume filling, a mathematical model of dynamics of pressure swing adsorption processes for synthesis gas separation has been developed. The model takes into consideration the influence of the processes of mass and heat transfer in gas and solid phases on the kinetics of diffusion transfer of adsorbate (carbon dioxide, carbon monoxide, hydrogen) in the adsorbent layer and accounts for all devices included in the process diagram (adsorber, compressor, vacuum pump, valves, throttle, receiver). Numerical studies of the process of separation of synth
APA, Harvard, Vancouver, ISO, and other styles
10

Bie, Yu, Ming Fu Hu, Xu Zhang, Xiao Qin Zhu, Jing Hua Chang, and Wen Yuan Mao. "Thermodynamic Analysis of an Ammonia Synthesis Process Based on Brayton Cycle." Advanced Materials Research 396-398 (November 2011): 939–45. http://dx.doi.org/10.4028/www.scientific.net/amr.396-398.939.

Full text
Abstract:
The paper develops a new ammonia synthesis process based on Brayton cycle, successfully solving the problem of low heat recovery efficiency of reaction heat by conventional Rankine cycle. In the new process, a gas turbine expander is introduced to drive the multistage compressor coaxially instead of raising steam in a waste heat boiler to drive a steam turbine. Such a process represents a typical reaction-separation system with a recycle stream and cold separation of the product from the recycle loop. Through thermodynamic analysis, it is found that the ammonia synthesis system has the innate
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Synthesis gas compressor"

1

Краевский, В. Н., О. П. Рыбальченко, В. С. Марцинковский, И. Е. Кухарев та В. И. Юрко. "Обеспечение динамической устойчивости корпуса низкого давления (463В5/5) компрессора синтез-газа поз. 103J". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/21549.

Full text
Abstract:
Рассматриваются причины динамической неустойчивости корпуса низкого давления модернизированного компрессора синтез – газа поз. 103J. Приводятся мероприятия, позволяющие повысить надежности его работы, а также дается краткое описание каждого из них. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/21549<br>There considered the reasons of low pressure case dynamic instability for modernized pos. 103J synthesis – gas compressor. There described activities to provide for improvement of its operation reliability, and also there given brief descriptions
APA, Harvard, Vancouver, ISO, and other styles
2

Кухарев, И. Е., та В. И. Гецман. "Повышение надежности турбины Р-32 компрессора синтез-газа поз. 401 на предприятии ОАО "Минудобрения", г. Россошь". Thesis, Издательство СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/21540.

Full text
Abstract:
Описывается модернизация паровой турбины привода компрессора синтез – газа производства аммиака, выполненная фирмой ООО «ТРИЗ» с целью снижения уровней вибраций во всем диапазоне частот вращения ротора турбины за счет уменьшения расстояния между подшипниками и установки дополнительной демпферной опоры. При цитуванні документа, використовуйте посилання http://essuir.sumdu.edu.ua/handle/123456789/21540<br>There described modernizing the steam turbine for driving the synthesis – gas compressor of ammonia production, which has been executed by the TRIZ OOO to decrease the vibration levels througho
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Synthesis gas compressor"

1

Mentzer, Fabian, Eirikur Agustsson, Johannes Ballé, David Minnen, Nick Johnston, and George Toderici. "Neural Video Compression Using GANs for Detail Synthesis and Propagation." In Lecture Notes in Computer Science. Springer Nature Switzerland, 2022. http://dx.doi.org/10.1007/978-3-031-19809-0_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"The Methanol Plant." In Chemical Engineering Explained: Basic Concepts for Novices. The Royal Society of Chemistry, 2017. http://dx.doi.org/10.1039/bk9781782628613-00533.

Full text
Abstract:
Having now covered all the major topics of chemical engineering, we will put this knowledge together to follow in more detail one of the two processes we first considered in Chapter 1, the production of methanol from natural gas, oxygen and steam. Use four detailed process flow diagrams we will follow the path of the natural gas as it enters the process, is dried, compressed, cleaned of sulfur and then saturated with steam. The natural gas and steam will then be combined with oxygen in the two reformers to produce synthesis gas, a mixture of hydrogen, carbon monoxide and carbon dioxide. We wil
APA, Harvard, Vancouver, ISO, and other styles
3

Smil, Vaclav. "Materials." In Creating and Transforming the Twentieth Century, Revised and Expanded. Oxford University PressNew York, NY, 2025. https://doi.org/10.1093/9780197784679.003.0010.

Full text
Abstract:
Abstract Production of old materials was transformed by new techniques and by rising capacities and efficiencies. The steel industry was transformed by a rapid diffusion of basic oxygen furnaces and by continuous casting; the synthesis of ammonia benefitted from better compressors and hydrogen derived from natural gas. All materials—minerals used in construction (sand, gravel, stone), metals (led by steel, aluminum, and copper), nonmetallic minerals (from graphite to silicon), fertilizers, and plastics—have seen large increases in extraction, production, and synthesis. The two most important t
APA, Harvard, Vancouver, ISO, and other styles
4

Sudhir Kumar Sinha, Akhoury, Umaprasana Ojha, Marriyappan Sivagnanam Balathanigaimani, and Sanjay Kar. "Adsorbed Natural Gas Storage for Vehicular Applications." In Natural Gas - New Perspectives and Future Developments [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.101216.

Full text
Abstract:
The use of adsorbed natural gas (ANG) as a transportation fuel is a relatively cleaner alternative compared to that of gasoline and is important from the perspective of environmental safety. However, unlike gasoline and diesel, natural gas requires compression, liquefaction, and adsorption techniques for its storage, as it has a very low volumetric energy density. Among all storage techniques, adsorption-based natural gas (ANG) storage is considered as more economical and relatively safe technology due to its mild temperature and pressure conditions for the storage. This chapter will summarize
APA, Harvard, Vancouver, ISO, and other styles
5

Dauletbay, Akbar. "Transportation of Hydrogen: Hydrogen Usage." In Hydrogen Technologies - Advances, Insights, and Applications. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1005066.

Full text
Abstract:
For large-scale hydrogen use for alternative fuel problems, hydrogen transportation must be solved. Hydrogen can be transported as compressed gas, liquid, or bound in carriers. The chapter describes current transportation technologies—gaseous hydrogen via pipelines or special trucks, and liquid hydrogen in cryogenic tanks. The potential of using existing natural gas pipelines is analyzed; the need for modern pipeline material complex research is emphasized. Transportation in solid or liquid carriers, disadvantages and advantages of transportation methods, and problems and ways to solve them ar
APA, Harvard, Vancouver, ISO, and other styles
6

Ikariya, Takao, and Ryoji Noyori. "Advances in Homogeneous, Heterogeneous, and Biphasic Metal-Catalyzed Reactions in Dense-Phase Carbon Dioxide." In Green Chemistry Using Liquid and Supercritical Carbon Dioxide. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780195154832.003.0006.

Full text
Abstract:
The use of compressed carbon dioxide as a reaction medium, either as a liquid or a supercritical fluid (sc CO2), offers the opportunity not only to replace conventional hazardous organic solvents but also to optimize and potentially control the effect of solvent on chemical synthesis. Although synthetic chemists, particularly those employing catalysis, may be relative latecomers to the area of supercritical fluids, the area of catalysis in carbon dioxide has grown significantly since around 1975 to the point that a number of excellent reviews have appeared (Baiker et al., 1999; Buelow et al.,
APA, Harvard, Vancouver, ISO, and other styles
7

Keefer, Robert F. "Fertilizers." In Handbook of Soils for Landscape Architects. Oxford University Press, 1999. http://dx.doi.org/10.1093/oso/9780195121025.003.0017.

Full text
Abstract:
Fertilizers for soil on which plants grow come in a variety of forms, such as organic, inorganic, single nutrient, double nutrient, complete fertilizer (contains N, P, and K in that order), speciality fertilizers, composts, and manures. Information about each of these forms follows. Most of the N used in fertilizers is derived from a synthetic process developed by Europeans called the “Claude-Haber process.” This process uses nitrogen gas (N2) from the atmosphere along with hydrogen gas (H2) from natural gas in a device where pressure can be increased and temperature can be raised. The reactio
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Synthesis gas compressor"

1

Blendulf, Lars J., and Graham D. Smith. "Design Point Simulation of Multispool Industrial Compressor Trains." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-470.

Full text
Abstract:
Software commonly used to predict Aeroengine performance has been adapted for the design point simulation of two large industrial compressor sets. A NOx gas compressor and an air compressor on a common shaft driven by a steam turbine and a tail gas turbine are modelled accurately after the inclusion of both exothermic and endothermic reactions in the NOx gas compressor. Experiment and theory agree to within 1.5%. Results for the simulation of a three spool Ammonia Synthesis compressor with a deliver pressure of 207 bar agree to within 1% of experimental data. Since complex gas mixtures were us
APA, Harvard, Vancouver, ISO, and other styles
2

Renzi, Massimiliano, Carlo Caligiuri, and Mosè Rossi. "Micro-Gas Turbine Feed With Natural Gas and Synthesis Gas: Variation of the Turbomachines’ Operative Conditions With and Without Steam Injection." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63801.

Full text
Abstract:
In this work, the performances of a 100 kW Micro Gas Turbine (MGT) fed by Natural Gas (NG) and three different biomass-derived Synthesis Gases (SGs) have been assessed using a MATLAB® simulation algorithm. The set of equations in the algorithm includes the thermodynamic transformations of the working fluid in each component, the performance maps that describe the turbomachines’ isentropic efficiencies and pressure ratios as a function of the reduced mass flow rate and the reduced rotational speed, the performance and the pressure losses in each component, as well as the consumption of the othe
APA, Harvard, Vancouver, ISO, and other styles
3

Rabovitser, Joseph, Stan Wohadlo, John M. Pratapas, et al. "Experimental Study of a 200 kW Partial Oxidation Gas Turbine (POGT) for Co-Production of Power and Hydrogen-Enriched Fuel Gas." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59272.

Full text
Abstract:
Paper presents the results from development and successful testing of a 200 kW POGT prototype. There are two major design features that distinguish POGT from a conventional gas turbine: a POGT utilizes a partial oxidation reactor (POR) in place of a conventional combustor which leads to a much smaller compressor requirement versus comparably rated conventional gas turbine. From a thermodynamic perspective, the working fluid provided by the POR has higher specific heat than lean combustion products enabling the POGT expander to extract more energy per unit mass of fluid. The POGT exhaust is act
APA, Harvard, Vancouver, ISO, and other styles
4

Blekhman, David I., Joseph C. Mollendorf, James D. Felske, John A. Lordi, and Ashish M. Joshi. "Roots Compressor: High Temperature Testing and Modeling." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59223.

Full text
Abstract:
The Roots compressor has enjoyed a multitude of applications. Retuned to produce a high-temperature stream of gas, the Roots compressor can be a part of such applications as pyrolitic synthesis, chemical decomposition, optical fiber production and experimental studies. Presently, it appears that by using advanced materials, a prototype capable of withstanding temperatures up to 1500–2000 K could be built. A series of experiments was performed and various performance data were recorded at 2280 and 3430 rpm. The maximum steady state temperature achieved and the corresponding pressure ratio were
APA, Harvard, Vancouver, ISO, and other styles
5

Peitsch, Dieter, Nikolaus Kurz, and Roland Fiola. "A New Method for Surge Margin Improvement of Booster Compressors in Modern Aeroengines." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-234.

Full text
Abstract:
The subject of this paper is the development and first analysis of the performance of a new booster bleed valve control logic to improve the surge margin of the booster compressor in the new BR715 turbofan. The booster compressor is driven by the LP spool of the two spool engine, comprising an aerodynamically tuned system out of fan root and booster compressor. The flow delivered at the exit of the booster compressor must be accepted by the following HP compressor. This matching is not always possible, since the rates of change of the spool speeds during transients behave differently as do pre
APA, Harvard, Vancouver, ISO, and other styles
6

Halstead, David E., David C. Wisler, Theodore H. Okiishi, Gregory J. Walker, Howard P. Hodson, and Hyoun-Woo Shin. "Boundary Layer Development in Axial Compressors and Turbines: Part 1 of 4 — Composite Picture." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-461.

Full text
Abstract:
Comprehensive experiments and computational analyses were conducted to understand boundary layer development on airfoil surfaces in multistage, axial-flow compressors and LP turbines. The tests were run over a broad range of Reynolds numbers and loading levels in large, low-speed research facilities which simulate the relevant aerodynamic features of modern engine components. Measurements of boundary layer characteristics were obtained by using arrays of densely packed, hot-film gauges mounted on airfoil surfaces and by making boundary layer surveys with hot wire probes. Computational predicti
APA, Harvard, Vancouver, ISO, and other styles
7

Morgan, Eric R., and Tom Acker. "Practical Experience With a Mobile Methanol Synthesis Device." In ASME 2014 8th International Conference on Energy Sustainability collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/es2014-6747.

Full text
Abstract:
Northern Arizona University has developed a methanol synthesis unit that directly converts carbon dioxide and hydrogen into methanol and water. The methanol synthesis unit consists of: a high pressure side that includes a compressor, a reactor, and a throttling valve; and a low pressure side that includes a knockout drum, and a mixer where fresh gas enters the system. Methanol and water are produced at high pressure in the reactor and then exit the system under low pressure and temperature in the knockout drum. The remaining, unreacted recycle gas that leaves the knockout drum is mixed with fr
APA, Harvard, Vancouver, ISO, and other styles
8

Ding, Liang, Tong Wang, Yao Fu, Bo Yang, and Chuangang Gu. "An Evaluation of Mixing Effect on the Recycle Stage of Syngas Compressor Based on Numerical and Experimental Investigations." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-69257.

Full text
Abstract:
With the requirement of the chemical synthetic process, the reaction pressure of the synthesis gas is over 14MPa. Meanwhile it is necessary to employ a recycle stage to improve the synthesis efficiency. The performance of the recycle stage would be influenced by the upstream from the previous stage and the complementary gas. However, it is difficult to understand the performance of the recycle section separately because of the lack of the testing data in practice. In fact, the inlet flow distortions caused by the two streams mixing process may result in significant deterioration in compressor
APA, Harvard, Vancouver, ISO, and other styles
9

Acocella, Angi, Emmanuel Lim, Kevin Cedrone, et al. "System and Market Analysis of Methanol Production Using Compact Engine Reformers." In ASME 2014 8th International Conference on Energy Sustainability collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/es2014-6518.

Full text
Abstract:
New energy plants coming online must be both economical and efficiently balanced to satisfy demanding requirements in the future. A balance of plant analysis was performed to determine the techno-economic feasibility of a 100 barrel oil equivalent (boe) per day, compact Gas to Liquid (GTL) methanol plant. Methanol itself is emerging as a possible alternative to gasoline; but it is also the precursor to dimethyl ether (DME), which has recently received a lot of attention as a low emitter of particulate matter and nitrous oxides, which can replace diesel in trucking applications and liquefied pe
APA, Harvard, Vancouver, ISO, and other styles
10

Haq, Inam U., Chittineni V. Kumar, and Rayed M. Al-Zaid. "Identification of the Intermittent Synchronous Instability in a High Performance Steam Turbine Rotor Due to Deteriorated Labyrinth Seals." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-305.

Full text
Abstract:
This paper reports the synchronous vibration instability problem (a rare phenomenon) experienced in a high pressure steam turbine rotor (19MW) driving synthesis gas compressor train in a large scale petrochemical complex. The turbine had about one year history of showing infrequently high vibration. Rotor vibrations appeared in an intermittent and irregular fashion and the perturbation frequency was the rotor operating speed of 10,135 rpm. The sealing steam system was found responsible for cropping the vibration. At a definite level of seal steam pressure (0.90 to 1.10 bar-gauge), operating sp
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Synthesis gas compressor"

1

Allen, Cody, and Ivan Carlos. PR283-22205-R01 Field Validation of a Total Emissions Efficiency Factor. Pipeline Research Council International, Inc. (PRCI), 2025. https://doi.org/10.55274/r0000138.

Full text
Abstract:
Continued interest in emissions factors and operational optimization have led to a combined fac-tor, called the Total Emissions Efficiency (TEE) Score. The TEE Score considers dry low emis-sions operation, power to fuel relationships and compressor recycle, distilled into a single Key Performance Indicator (KPI). The TEE score can be used along a pipeline to help gas control and gas planning groups identify non-efficient emissions operation of a unit or station. This PRCI study has deployed the TEE Score to a section of Kinder Morgan's Natural Gas pipe-line and created a visual dashboard for t
APA, Harvard, Vancouver, ISO, and other styles
2

Haselbacher, Andreas, Michel Arnal, Maurizio Barbato, et al. Joint synthesis “Electricity storage via adiabatic air compression” of the NRP “Energy”. Swiss National Science Foundation (SNSF), 2020. http://dx.doi.org/10.46446/publication_nrp70_nrp71.2020.3.en.

Full text
Abstract:
La fermeture des centrales nucléaires et le développement de l’énergie solaire et éolienne rendent la production d’électricité plus volatile. De nouveaux systèmes de stockage sont nécessaires pour s’assurer que l’électricité est disponible au moment où elle est nécessaire. Le stockage adiabatique d’air comprimé représente une technologie prometteuse. Il utilise l’excédent de production des installations solaires et éoliennes pour comprimer l’air ambiant et le stocker dans une cavité souterraine. Au besoin, l’air comprimé est à nouveau détendu et entraîne alors une turbine qui produit de l’élec
APA, Harvard, Vancouver, ISO, and other styles
3

Kolodziejczyk, Bart. Unsettled Issues Concerning the Use of Green Ammonia Fuel in Ground Vehicles. SAE International, 2021. http://dx.doi.org/10.4271/epr2021003.

Full text
Abstract:
While hydrogen is emerging as a clean alternative automotive fuel and energy storage medium, there are still numerous challenges to implementation, such as the economy of hydrogen production and deployment, expensive storage materials, energy intensive compression or liquefaction processes, and limited trial applications. Synthetic ammonia production, on the other hand, has been available on an industrial scale for nearly a century. Ammonia is one of the most-traded commodities globally and the second most-produced synthetic chemical after sulfuric acid. As an energy carrier, it enables effect
APA, Harvard, Vancouver, ISO, and other styles
4

PR-000-25BDL-001 Reciprocating Engine Exhaust Methane Slip Reduction - Compilation and Final Reports. Pipeline Research Council International, Inc. (PRCI), 2025. https://doi.org/10.55274/r0000117.

Full text
Abstract:
The compilation report, prepared under CPS-14-09 included in the bundle, summarizes the research funded and supervised by the Compressor and Pump Station Technical Committee as part of the PCC Roadmap and GHG SRP. The CPS-17-08 Reciprocating Engine Exhaust Methane Slip Reduction project encompassed 11 separate contracts, each contributing to the overarching goal of reducing methane emissions from reciprocating engines at natural gas compressor stations. The final reports from these contracts are summarized in the compendium and are included in full within the bundle. The compilation report syn
APA, Harvard, Vancouver, ISO, and other styles
5

PR-271-143717-R01 Ground Based Radar Monitoring of Pipeline Infrastructure. Pipeline Research Council International, Inc. (PRCI), 2016. http://dx.doi.org/10.55274/r0010998.

Full text
Abstract:
A new type of monitoring technology - Ground-based Synthetic Aperture Radar (GBSAR) - has been proven in mining applications and shows promise for monitoring deformation of infrastructure or slope movement with accuracy of better than one millimeter (0.040 in.). This project was thus devised to test the utility of this technology for monitoring above-ground gas pipeline infrastructure that is being impacted by ground subsidence. The infrastructure monitored included: a compressor building, a segment of pipeline, pipe supports and foundations. The first objective of this project was to demonstr
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Synthesis gas compressor' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography