Log in

Relevant bibliographies by topics / T-Scan®III computerized occlusal analysis system / Journal articles

To see the other types of publications on this topic, follow the link: T-Scan®III computerized occlusal analysis system.

Journal articles on the topic 'T-Scan®III computerized occlusal analysis system'

Author: Grafiati

Published: 4 September 2021

Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'T-Scan®III computerized occlusal analysis system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Bozhkova, Tanya P. "The T-SCAN System in Evaluating Occlusal Contacts." Folia Medica 58, no. 2 (2016): 122–30. http://dx.doi.org/10.1515/folmed-2016-0015.

Full text

Abstract:

AbstractBackground: Normal occlusal and articulation relations between the jaws ensure equal distribution of occlusal forces during mastication. A T-SCAN system allows these relations to be measured dynamically during the articulation cycle.Aim: To evaluate the T-SCAN III system in measuring and assessing the forces of occlusal contacts and their digital presentation.Patients and methods: Thirty students aged 19 - 22 years were examined. Of these only one matched the study criteria:- intact dentition;- without or with class I fillings in teeth 36 or 46;- Angle’s class I jaw relationWe used a c

APA, Harvard, Vancouver, ISO, and other styles

2

Halili, Rajmonda, Jadranka Bundevska, Alban Shabani, Sotir Maja, and Sebahate Hamiti Alidema. "The Importance of T-Scan III Digital Electronic System in Fixed Restorations Occlusal Analysis – A Review." Open Access Macedonian Journal of Medical Sciences 10, F (2022): 444–47. http://dx.doi.org/10.3889/oamjms.2022.8816.

Full text

Abstract:

BACKGROUND: Occlusion is one of the most important aspects of dentistry. Dental occlusion differs among individuals. Subsequently, realizing the correct physiological occlusion is essential for the complex functioning of the stomatognathic system during the mouth prosthodontics rehabilitation. AIM: The purpose of this review paper is to provide an overview of the T-Scan system over its utility in fixed restorations occlusal analysis. MATERIALS AND METHODS: An electronic search was performed through PubMed, MEDLINE, Web of Science, and Google Scholar. The inclusion criteria for selection were a

APA, Harvard, Vancouver, ISO, and other styles

3

Cohen-Lévy, Julia, and Nicolas Cohen. "Computerized occlusal analysis in Dentofacial orthopedics: indications and clinical use the T-scan III system." Journal of Dentofacial Anomalies and Orthodontics 15, no. 2 (2012): 203. http://dx.doi.org/10.1051/odfen/2012103.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Akácsos, Szidónia Renáta, Melinda Kis, Melinda Székely, Sorin Popșor, and Kinga Dörner. "Jaw relationship assessment for removable complete dentures using the t-scan computerised system – a case report." Medicine and Pharmacy Reports 92 (December 13, 2019): S85—S90. http://dx.doi.org/10.15386/mpr-1522.

Full text

Abstract:

Objective. For obtaining the perfect balance of a removable complete denture, we have a few clinical procedures to complete, but only the analysis of the occlusal load distribution at various vertical dimensions of occlusion can give us the precise data. Method. The patient selected for this case report was a 35 years old edentulous female who requested prosthetic treatment with complete removable dentures. We followed the usual clinical steps of obtaining an acrylic denture, as well as the T-Scan III analysis during the jaw registration, in different conditions: with the occlusal wax ri

APA, Harvard, Vancouver, ISO, and other styles

5

Halili, Rajmonda, Jadranka Bundevska, Venera Bimbashi, Sotir Maja, Goce Dimoski, and Sebahate Hamiti Alidema. "Analysis of Occlusal Force Distributions at the Position of Maximum Intercuspation in Patients with Fixed Restorations." International Journal of Biomedicine 12, no. 3 (2022): 423–27. http://dx.doi.org/10.21103/article12(3)_oa14.

Full text

Abstract:

The aim of the study was to determine maximum bite force (MBF) and the percentage of bite force distribution at the position of maximum intercuspation for patients with fixed restorations. Methods and Results: This study enrolled 60 subjects [33(55%) female and 27(45%) male] divided into two groups: The control group (CG) included 30 patients with intact teeth; the experimental group (EG) included 30 patients with fixed restorations. In EG, occlusion was analyzed before and after fixed restoration insertion (FRI). We used the T-Scan III Computerized Occlusal Analysis System 7.0 (Tekscan Inc.,

APA, Harvard, Vancouver, ISO, and other styles

6

Bida, О. V., and О. V. Bida. "ASSESSMENT OF THE OCCLUSAL RELATIONS NATURE AT THE STAGES OF ORTHOPEDIC REHABILITATION OF PERSONS WITH PERIODONTAL TISSUE DISEASES COMPLICATED BY DENTITION DEFECTS." Ukrainian Dental Almanac, no. 1 (March 23, 2021): 59–63. http://dx.doi.org/10.31718/2409-0255.1.2021.09.

Full text

Abstract:

Resume. According to epidemiological studies, there is still an increased prevalence of periodontal disease among the population of different regions of the world, with increasing intensity and aggressiveness. Long-term chronic generalized lesions of recurrent and progressive inflammatory-dystrophic process lead to the destruction of alveolar processes, pathological mobility of teeth, tooth loss and dentofacial dysfunctions. One of the most characteristic symptoms of generalized periodontitis is the presence of traumatic occlusion. Depending on the degree of pathological changes in periodontal

APA, Harvard, Vancouver, ISO, and other styles

7

Balos, Monica Dora, Claudia Soaita, Diana Cerghizan, and Sorin Popsor. "A Study on the Mandibular Arc of Closure Reproducibility Using the T-Scan III Computerized Occlusal Analysis System." Procedia Technology 19 (2015): 916–20. http://dx.doi.org/10.1016/j.protcy.2015.02.131.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lopes, Robson Felipe Tosta, Marcelo Palinkas, Gabriel Pádua da Silva, et al. "Stroke: An electromyographic approach to the masseter and temporal muscles, orofacial soft tissue pressure, and occlusal force." PLOS ONE 18, no. 3 (2023): e0282362. http://dx.doi.org/10.1371/journal.pone.0282362.

Full text

Abstract:

Stroke is a cerebrovascular disease that triggers changes in the central and peripheral nervous systems, and can compromise human body function. This cross-sectional observational study aimed to analyze the electromyographic (EMG) activity of the masseter and temporal muscles, orofacial soft tissue pressure, and strength of occlusal contacts in patients who had suffered a stroke. Twenty-four patients were divided into two groups: stroke (n = 12) and control (n = 12). The EMG of the masseter and temporal muscles was evaluated during mandibular rest, protrusion, right laterality, left laterality

APA, Harvard, Vancouver, ISO, and other styles

9

Metwally, Azza. "Comparison Of Patient Satisfaction & Occlusal Force Distribution pattern In CAD/ CAM and conventional Complete Dentures Using The T-Scan III Computerized Occlusal Analysis System. (RCT)." Egyptian Dental Journal 65, no. 3 (2019): 2641–49. http://dx.doi.org/10.21608/edj.2019.72627.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Domenyuk, D. A., B. N. Davydov, T. S. Kochkonyan, et al. "Neurophysiological assessment of the condition of the masticatory muscle group in patients with occlusion disorders and chronic generalized periodontitis." Medical alphabet, no. 11 (May 12, 2024): 81–91. http://dx.doi.org/10.33667/2078-5631-2024-11-81-91.

Full text

Abstract:

Background. Recently, the interest of dentists and physiologists has been focused on the development of a set of informative computerized techniques for an objective analysis of the functional state of the dentofacial apparatus. Achieving certain successes in conducting functional diagnostic examinations contributes to the development of algorithms for complex treatment of patients with generalized periodontitis and premature occlusal contacts.Goal. Study of the functional state of the dentofacial apparatus according to the parameters of bioelectrical activity of muscles in patients with chron

APA, Harvard, Vancouver, ISO, and other styles

11

Lykhota, K. M. "EVALUATION OF THE DYNAMICS OF OCCLUSION RATIO DURING ORTHODONTIC TREATMENT OF PATIENTS WITH PERMANENT BITE." Ukrainian Dental Almanac, no. 4 (December 12, 2018): 50–54. http://dx.doi.org/10.31718/2409-0255.4.2018.09.

Full text

Abstract:

The unity of the tooth-jaw system is ensured by the close interaction of dental rows, jaws, chewing and facial muscles, temporomandibular joint. Surgical anomalies of bite are often accompanied by significant changes in occlusion ratio of the tooth-jaw system, which significantly affects the quality of life of patients [1, 2, 3]. Significant influence on occlusion ratio has orthodontic treatment. Introduction of high technologies into the practice of prevention and treatment of abnormalities of the zygomatic system contributes to the improvement of dental health, however, the problem of violat

APA, Harvard, Vancouver, ISO, and other styles

12

Lazic, Vojkan, Slavoljub Zivkovic, and Gorjana Popovic. "T-Scan II computerized occlusal analysis." Serbian Dental Journal 51, no. 1 (2004): 24–29. http://dx.doi.org/10.2298/sgs0401024l.

Full text

Abstract:

Occlusal analysis using computerized technology has become a part of modern information technology. The aim of this study was to show the possibilities of T-Scan II computerized occlusal analyzer in prosthetic and restorative postinsertion occlusal problems. The T-Scan II computerized occlusal analysis (Tekscan, Boston, USA) is an integral part of clinical functional analyses in prosthetic and restorative insertions. The T-Scan II computerized system can quickly determine prematurities, high points, regions of excessive force and nonuniform force concentration. It can also calculate disocclusi

APA, Harvard, Vancouver, ISO, and other styles

13

Lazic, Vojkan, and Slavoljub Zivkovic. "T-scan II occlusal analysis in restorative dentistry." Serbian Dental Journal 49, no. 3-4 (2002): 110–13. http://dx.doi.org/10.2298/sgs0204110l.

Full text

Abstract:

The comparison of accufilm markings and computerized T-Scan II force plots of restorations and occlusal interferences in intercuspal position of the lower jaw, before and after occlusal adjustment showed a great improvement in force distribution, balance of occlusal forces and evenness of the right and left side. The computer analysis through T-Scan II system help us to clearly understand what those well balanced occlusal contacts and force distribution really mean for the proper restorative occlusal therapy.

APA, Harvard, Vancouver, ISO, and other styles

14

Jurkowski, Piotr, Jolanta Kostrzewa-Janicka, and Elżbieta Mierzwińska-Nastalska. "T-Scan III Computerized Occlusal Analysing System: Structure, functions and applications." Prosthodontics 62, no. 2 (2012): 100–109. http://dx.doi.org/10.5604/.1011885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Lazic, Vojkan, Aleksandar Todorovic, Slavoljub Zivkovic, and Zeljko Martinovic. "Computerized occlusal analysis in bruxism." Srpski arhiv za celokupno lekarstvo 134, no. 1-2 (2006): 22–29. http://dx.doi.org/10.2298/sarh0602022l.

Full text

Abstract:

Introduction. Sleep bruxism as nocturnal parafunction, also known as tooth grinding, is the most common parasomnia (sleep disorder). Most tooth grinding occurs during rapid eye movement - REM sleep. Sleep bruxism is an oral habit characterized by rhythmic activity of the masticatory muscles (m. masseter) that causes forced contact between dental surfaces during sleep. Sleep bruxism has been associated with craniomandibular disorders including temporomandibular joint discomfort, pulpalgia, premature loss of teeth due to excessive attrition and mobility, headache, muscle ache, sleep interruption

APA, Harvard, Vancouver, ISO, and other styles

16

Trpevska, Vesna, Gordana Kovacevska, Alberto Benedeti, and Bozidar Jordanov. "T-Scan III System Diagnostic Tool for Digital Occlusal Analysis in Orthodontics – a Modern Approach." PRILOZI 35, no. 2 (2014): 155–60. http://dx.doi.org/10.2478/prilozi-2014-0020.

Full text

Abstract:

Abstract Introduction: This systematic literature review was performed to establish the mechanism, methodology, characteristics, clinical application and opportunities of the T-Scan III System as a diagnostic tool for digital occlusal analysis in different fields of dentistry, precisely in orthodontics. Methods: Searching of electronic databases, using MEDLINE and PubMed, hand searching of relevant key journals, and screening of reference lists of included studies with no language restriction was performed. Publications providing statistically examined data were included for systematic review.

APA, Harvard, Vancouver, ISO, and other styles

17

Popa, Angelica Diana, Diana Elena Vlăduțu, Adina Andreea Turcu, et al. "Aspects of Occlusal Recordings Performed with the T-Scan System and with the Medit Intraoral Scanner." Diagnostics 14, no. 13 (2024): 1457. http://dx.doi.org/10.3390/diagnostics14131457.

Full text

Abstract:

Introduction: Dental occlusion refers to the static and dynamic relationships that are established between the teeth of the two arches and is an important factor in the homeostasis of the dento-maxillary system. The objective of the present study was to compare two digital occlusal analysis systems: the T-Scan III system and the Medit I600 intraoral scanner. Materials and Methods: The study was carried out on 20 students from the Faculty of Dental Medicine Craiova, whose dental occlusion was assessed with the T-Scan III system and with the Medit I600 intraoral scanner. Dental occlusion was ass

APA, Harvard, Vancouver, ISO, and other styles

18

Sachdeva, Shivani, Sanket Shinde, Harish Saluja, and Vipin Dehane. "Diagnostic Tool in Treatment Planning of Dentinal Hypersensitivity." Journal of Head & Neck Physicians and Surgeons 10, no. 2 (2022): 183–87. http://dx.doi.org/10.4103/jhnps.jhnps_38_22.

Full text

Abstract:

Background: Occlusion is dynamic and plays an important role in the functioning of the stomatognathic system. Disturbance in one of the components of the stomatognathic system may result in hypersensitivity of teeth, orofacial pain, migraine, and temporomandibular joint (TMJ) disorders. Coronoplasty performed using articulating paper is the conventional method for occlusal corrections. T-scan is a computerized occlusal analysis system that overcomes the limitations of articulating paper. Methods: Patients with Myofascial Pain Dysfunction Syndrome (MPDS) having dentinal hypersensitivity were ta

APA, Harvard, Vancouver, ISO, and other styles

19

Sachdeva, Shivani, Sanket Shinde, and Harish Saluja. "New Avenue for Treatment of Dentinal Hypersensitivity Assisted with Tekscan a Diagnostic Tool." Medical Journal of Dr. D.Y. Patil Vidyapeeth 17, no. 1 (2023): 94–99. http://dx.doi.org/10.4103/mjdrdypu.mjdrdypu_581_22.

Full text

Abstract:

ABSTRACT Background: Occlusion is dynamic and plays an important role in the functioning of the stomatognathic system. Disturbance in one of the components of the stomatognathic system may result in hypersensitivity of teeth, orofacial pain, migraine, and temporomandibular joint (TMJ) disorders. Coronoplasty done using articulating paper is the conventional method for occlusal corrections. T-scan is a computerized occlusal analysis system that overcomes the limitations of articulating paper. Methods: Patients with Myofacial pain dysfunction syndrome (MPDS) having dentinal hypersensitivity were

APA, Harvard, Vancouver, ISO, and other styles

20

Bozhkova, Tanya. "Comparison of Two Generations of Systems for Digital Occlusion Examination." Open Access Macedonian Journal of Medical Sciences 9, no. D (2021): 133–37. http://dx.doi.org/10.3889/oamjms.2021.6545.

Full text

Abstract:

BACKGROUND: The modern concept of occlusion includes the relationship between teeth, masticatory muscles, and temporomandibular joints in function and dysfunction. Occlusion can be defined very simply: it means the contacts between teeth. Qualitative and quantitative methods are used to register and evaluate occlusal contacts. The T-Scan handpiece model was updated in 2015 as T-Scan Novus (software version 9.1) and the latest updated one being the T-Scan version 10 software introduced in 2018. AIM: The purpose of this study is to demonstrate the capabilities and results of two generations of s

APA, Harvard, Vancouver, ISO, and other styles

21

S.El Gabry, Hisham, Sherihan M. Eissa, and Mohamed A. Abuheikal. "DIGITAL OCCLUSAL ANALYSIS AND ORAL HEALTH-RELATED QUALITY OF LIFE OF PATIENTS WITH 3D PRINTED COMPLETE DENTURES VERSUS CONVENTIONAL DENTURES." International Journal of Advanced Research 9, no. 12 (2021): 210–21. http://dx.doi.org/10.21474/ijar01/13894.

Full text

Abstract:

Background: 3D printed complete dentures fabrication with computer-aided designing and computer-aided manufacturing (CAD/CAM) techniques is becoming popular nowadays. However, studies that analyzed the occlusal forces distribution using recent digital methods as T-scan III and further evaluated the dentures effect on patient`s life quality were lacking. Objectives: Evaluation of the occlusal forces distribution using T-scan III, and evaluation of the oral health-related quality of life (OHRQoL) using Oral Health Impact Profile for Edentulous Patients (OHIP-EDEN) questionnaire for 3D printed co

APA, Harvard, Vancouver, ISO, and other styles

22

Dzingutė, Agnė, Gaivilė Pileičikienė, Aušra Baltrušaitytė, and Gediminas Skirbutis. "Evaluation of the relationship between the occlusion parameters and symptoms of the temporomandibular joint disorder." Acta medica Lituanica 24, no. 3 (2017): 167–75. http://dx.doi.org/10.6001/actamedica.v24i3.3551.

Full text

Abstract:

Background. The aetiology of temporomandibular joint disorders (TMD) is multifactorial, whereas occlusal disharmony is one of the predisposing factors. Researchers still discuss the relation between occlusion and TMD. Objective. The study aims to investigate the relation between static occlusal parameters and TMD clinical symptoms using T-Scan II analysis system. Material and methods. The sample consisted of 44 persons divided into the treatment group of 20 TMD patients and the control group of 24 subjects without TMD. The main task of T-Scan II computerized occlusal analysis system was to rec

APA, Harvard, Vancouver, ISO, and other styles

23

Ruttitivapanich, Nitikarn, Ratchawan Tansalarak, Jadesada Palasuk, and Jittima Pumklin. "Correlation of Bite Force Interpretation in Maximal Intercuspal Position among Patient, Clinician, and T-Scan III System." European Journal of Dentistry 13, no. 03 (2019): 330–34. http://dx.doi.org/10.1055/s-0039-1693755.

Full text

Abstract:

Abstract Objective The main purpose of this article was to determine the correlation of bite force in maximal intercuspal position (MIP) among patient’s perceptions, clinician subjective interpretation, and T-Scan III system. Materials and Methods Forty-three dental students at Naresuan University (Phitsanulok, Thailand) participated in the study. Subjects were positioned by Frankfurt horizontal plane paralleled to the horizontal plane and asked to bilaterally clenched in MIP. Patient’s perception was evaluated by asking which side of the jaw had heavier bite force (right, left, or equally on

APA, Harvard, Vancouver, ISO, and other styles

24

Lee, Sang-Min. "Pattern Analysis of Occlusal Contacts During Lateral Excursion Using T-scan III System." Journal of Dental Rehabilitation and Applied Science 29, no. 1 (2013): 59–68. http://dx.doi.org/10.14368/jdras.2013.29.1.059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Di Berardino, Federica, Eliana Filipponi, Massimo Schiappadori, Stella Forti, Diego Zanetti, and Antonio Cesarani. "The occlusal imaging and analysis system by T-scan III in tinnitus patients." Biomedical Journal 39, no. 2 (2016): 139–44. http://dx.doi.org/10.1016/j.bj.2016.04.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Stoica, Eniko Tunde, Corina Marcauteanu, Anca Tudor, et al. "Influence of the Text Neck Posture on the Static Dental Occlusion." Medicina 58, no. 9 (2022): 1303. http://dx.doi.org/10.3390/medicina58091303.

Full text

Abstract:

Background and Objectives: The excessive use of smartphones for various tasks led to a new adverse postural phenomenon called text neck. The aim of this study was to investigate the effect of the text neck posture (TNP) on static occlusion by using the T-Scan III occlusal diagnostic system. Materials and Methods: Nineteen subjects (aged 20 to 24 years) were considered for this research. They had normal values for anterior overbite and overjet, Angle Class I occlusion, no posterior crossbite, and no signs or symptoms of cervical or temporo-mandibular disorders. Occlusal registrations were perfo

APA, Harvard, Vancouver, ISO, and other styles

27

Janosi, Kinga Mária, Aurița Albu, Adriana Crăciun, and Diana Cerghizan. "Rehabilitation of the frontal teeth with palatal veneers by using T-Scan occlusal analysis - case report." Acta Stomatologica Marisiensis Journal 3, no. 1 (2020): 282–88. http://dx.doi.org/10.2478/asmj-2020-0006.

Full text

Abstract:

AbstractPathological tooth wear occurs in young patients. The rehabilitation of these teeth must be performed accurately, considering the occlusal relationships and the correct distribution of the masticatory forces. The therapeutic approach must be as minimally invasive as possible.In this case presentation, six palatal veneers were realized for the aesthetic and functional rehabilitation of a young patient’s upper frontal teeth. The restorations were made on refractory casts, from feldspathic ceramics, allowing a proper esthetic. The occlusal rehabilitation involves the mounting of the casts

APA, Harvard, Vancouver, ISO, and other styles

28

Nespryadko, V. P., O. S. Volovar, O. H. Tereshchuk, I. A. Shinchukovskyi, and L. O. Etnis. "DYNAMIC CHANGES IN INDICATORS OF COMPUTERISED OCCLUSION ANALYSIS IN PATIENTS WITH OCCLUSAL DISORDERS RESULTED FROM IMPROPER DENTAL PROCEDURES." Актуальні проблеми сучасної медицини: Вісник Української медичної стоматологічної академії 23, no. 2.1 (2023): 132–35. http://dx.doi.org/10.31718/2077-1096.23.2.1.132.

Full text

Abstract:

Introduction: The time of adaptation of the patient's maxillofacial apparatus to reconstructive manipulations is a crucial issue in prosthodontics. The sequence of actions and diagnostic measures used in the preparatory stages for prosthetics is still remaining unclear. Our research aimed to predict the duration of treatment and occlusal correction needed in combination with repositioning of the lower jaw. Materials and methods: 134 patients were included in the study. T-Scan computerized analysis of occlusion was used before the treatment, immediately after the denture placemen, and in

APA, Harvard, Vancouver, ISO, and other styles

29

Vlăduțu, Diana Elena, Mihaela Ionescu, Lorenzo Noveri, et al. "Aspects of Dental Occlusion Assessed with the T-Scan System among a Group of Romanian Dental Students in a Cross-Sectional Study." International Journal of Environmental Research and Public Health 20, no. 6 (2023): 4877. http://dx.doi.org/10.3390/ijerph20064877.

Full text

Abstract:

This study evaluated the occlusal relationships in students with bruxism, using the T-Scan III system, and their correlation with the activity of the masticatory muscles assessed through surface electromyography (sEMG). The study group was divided into two subgroups (based on self-reporting): 20 participants with possible bruxism and 20 participants without possible bruxism; all participants underwent the following evaluations: sEMG recordings using the dia-BRUXO device for masticatory muscles assessment, as well as static and dynamic occlusion using the T-SCAN III system. The analysis of the

APA, Harvard, Vancouver, ISO, and other styles

30

Hlushko, Тaras, Yuriy Vovk, Volodymyr Vovk, Petro Kryukov, and Мaksym Lohash. "CLINICAL AND INSTRUMENTAL STUDY RESULTS OF COMPARING DIGITAL OCCLUSION INDICES AT REGISTRATION OF INTERCUSPAL POSITION IN PATIENTS WITH EDENTULOUS SPACES BEFORE AND AFTER PROSTHETIC REHABILITATION." Acta Medica Leopoliensia 28, no. 1-2 (2022): 133–46. http://dx.doi.org/10.25040/aml2022.1-2.133.

Full text

Abstract:

Aim. The research aims at carrying out a comparative clinical and instrumental analysis related to registering occlusal relations of intercuspal contact position in patients with edentulous spaces before and after prosthetic rehabilitation using various registration materials. Material and Methods. Examination of 5 patients of both genders aged 28 to 51 years was performed at clinical bases of the department of surgical and prosthetic dentistry of the Faculty of Postgraduate Education at Danylo Halytskyi Lviv National Medical University. Clinically, all patients were provided with a stan

APA, Harvard, Vancouver, ISO, and other styles

31

Maheshkumar, K., Nagalakshmi Chowdhary, Ramesh Chowdharry, Rajashekar Reddy Vundela, Nithin Kumar Sonnahalli, and A. Thirumagal Anuraaga. "Bite force evaluation at maximal intercuspal position: An in vivo comparative study between stainless steel and zirconia crowns on primary molar teeth." Journal of Indian Society of Pedodontics and Preventive Dentistry 41, no. 2 (2023): 89–97. http://dx.doi.org/10.4103/jisppd.jisppd_156_23.

Full text

Abstract:

ABSTRACT Objective: The objective of this study was to clinically evaluate and compare the mean bite force changes at maximum intercuspal position, along with parental satisfaction following full crown restoration using stainless steel crown/zirconia crown on primary molar teeth using digital occlusal analysis system T-Scan III (Tekscan Corp, Boston, Mass., USA). Materials and Methods: Thirty-six primary molars of children aged 6–9 years with pulpal involvement were selected for the study. The selected teeth were allocated to either of the two groups using simple random sampling technique: Gro

APA, Harvard, Vancouver, ISO, and other styles

32

Mello, Edneia Corrêa de, Lígia Maria Napolitano Gonçalves, Marcelo Palinkas, et al. "Effect of Therapeutic Horseback Riding on Masticatory Performance and Quality of Life in Older Adults." Journal of Health Sciences 26, no. 3 (2024): 169–76. http://dx.doi.org/10.17921/2447-8938.2024v26n3p169-176.

Full text

Abstract:

Abstract Regular physical activity combined with adequate nutrition delays the loss of functional capacity and promotes healthy aging. Therapeutic horseback riding (THR) involves interactions with horses and provides physical, cognitive, and social benefits. However, the effect of THR on masticatory performance remains unclear. Therefore, this study aimed to evaluate the effects of a THR Program on masticatory performance and quality of life in older adults. Sixteen participants (60-79 years old) underwent three months of THR, with two visits to the center per week, on non-consecutive days. Ma

APA, Harvard, Vancouver, ISO, and other styles

33

Holubchenko, O. Y., and P. S. Flis. "UNIFIED ALGORITHM OF REHABILITATION OF PATIENTS WITH OCCLUSIONAL DISORDERS OF IATROGENIC GENESIS COMBINED WITH VERTICAL MALOCCLUSION." Art of Medicine 22, no. 2 (2022): 26–31. http://dx.doi.org/10.21802/artm.2022.2.22.26.

Full text

Abstract:

Malocclusion is common dental diseases. According to epidemiological studies, occlusal pathology in the vertical plane is 5-7% among all anomalies. Occlusial problems contribute to the violation of basic body functions such as breathing, speech, chewing, which significantly impairs the quality of life of patients.Orthodontic treatment of adult patients has its own characteristics associated with the presence of concomitant pathology, as well as the inability to correct some pathologies only by orthodontic treatment. In the case of severe occlusion, complicated by tooth loss, a combination of s

APA, Harvard, Vancouver, ISO, and other styles

34

Khasanova, Diana, Sergey Averianov, Marina Galiullina, Rinat Yunusov, and Fanya Hachatryan. "A DIFFERENTIATED APPROACH TO THE DIAGNOSIS OF OCCLUSIVE DISORDERS AT THE STAGES OF FUNCTIONAL EXAMINATION OF THE CHEWING APPARATUS." Actual problems in dentistry 17, no. 3 (2021): 132–38. http://dx.doi.org/10.18481/2077-7566-21-17-3-132-138.

Full text

Abstract:

Occlusion is a harmonious interaction of the dental system in dynamics, ending with the contact of teeth in conditions of their normal or disturbed ratio. This is a complex action involving teeth, masticatory muscles, TMJ. Occlusive disorders are a reflection of the external manifestations of pathological processes of the dental system. There is no doubt that in the search for etiological factors of occlusion disorders, the problem will manifest itself in one of the parts of the chewing system. The aim of the study was to optimize the early diagnosis of occlusive disorders in young patients wi

APA, Harvard, Vancouver, ISO, and other styles

35

Stanford, Sarah, Zeni Kharel, Lauryn Hemminger, et al. "Abstract PO4-20-11: Excellent Response to Trastuzumab Deruxtecan in “HER-2 Low” Leptomeningeal Breast Cancer and Diagnostic and Monitoring Utility of CNSide Assay." Cancer Research 84, no. 9_Supplement (2024): PO4–20–11—PO4–20–11. http://dx.doi.org/10.1158/1538-7445.sabcs23-po4-20-11.

Full text

Abstract:

Abstract A 72-year-old female presented to the emergency department with sudden onset of imbalance and cognitive decline. Two years ago, she was diagnosed with stage III estrogen receptor (ER) positive, progesterone receptor (PR) negative and human epidermal growth factor receptor 2 (HER2) negative (immunohistochemistry score: 0) invasive breast cancer. She subsequently underwent lumpectomy, adjuvant radiation and chemotherapy. She had been taking adjuvant letrozole at the time of presentation. Magnetic resonance imaging (MRI) of the brain showed obstructive hydrocephalus without any parenchym

APA, Harvard, Vancouver, ISO, and other styles

36

Karakis, Duygu, and Elif Didem Demirdag. "Adjustment of Occlusal Splint with Synchronized T-Scan III Digital Occlusal Analysis System and Bio-EMG III in a Patient with Sleep Bruxism." Journal of Advanced Oral Research, December 21, 2020, 232020682097769. http://dx.doi.org/10.1177/2320206820977696.

Full text

Abstract:

The occlusal splint has been frequently used as an effective treatment in sleep bruxism patients. In the adjustment procedure of occlusal splint with an optimal occlusion, clinicians usually use conventional methods; however, they cannot measure the surface area of contacts, amount of force, and contacting time sequence. Recently, two separate technologies have been synchronized together: T-Scan III and BioEMG III. In the present case report, an occlusal splint in a patient with sleep bruxism was adjusted with synchronized T-Scan computerized digital occlusal analysis system and BioEMG III. Op

APA, Harvard, Vancouver, ISO, and other styles

37

Chaturvedi, Saurabh, Mohamed Khaled Addas, Nasser M. Alqahtani, Nasser M. Al Ahmari, and Mohammed A. Alfarsi. "Clinical analysis of CAD-CAM milled and printed complete dentures using computerized occlusal force analyser." Technology and Health Care, March 12, 2021, 1–15. http://dx.doi.org/10.3233/thc-202766.

Full text

Abstract:

BACKGROUND: Digital complete dentures (CDs) by computer-aided designing and computer-aided manufacturing (CAD-CAM) techniques (milling and three-dimensional (3-D) printing) have been evaluated clinically and provided satisfactory results. But clinical studies assessing occlusal forces by digital dentures are lacking. OBJECTIVES: To compare the occlusal force parameters in complete dentures (CDs) fabricated by milling, 3-D printing and conventional techniques having 3 commonly used occlusal schemes, using computerized occlusal force analysis system (Tech-Scan III- T-Scan III). METHODS: A total

APA, Harvard, Vancouver, ISO, and other styles

38

Chaturvedi, Saurabh, Mohamed Khaled Addas, Nasser M. Alqahtani, Nasser M. Al Ahmari, and Mohammed A. Alfarsi. "Computerized occlusal forces analysis in complete dentures fabricated by additive and subtractive techniques." Technology and Health Care, March 5, 2021, 1–15. http://dx.doi.org/10.3233/thc-202736.

Full text

Abstract:

BACKGROUND: Fabrication of complete dentures by computer-aided designing and computer-aided manufacturing (CAD-CAM) techniques are now common. Subtractive and Additive are the two principal CAD-CAM techniques used for this purpose. However, studies that evaluated the occlusal forces by CDs manufactured by these techniques are lacking. OBJECTIVES: To compare the occlusal forces in complete dentures fabricated by additive, subtractive and conventional techniques with different occlusal schemes, using computerized occlusal force analysis system [Tech-Scan III (T-scan III)]. METHODS: Three groups

APA, Harvard, Vancouver, ISO, and other styles

39

Melnychuk, Arsen. "The Experience of Studying the State of Occlusal Relations in Patients with Generalized Periodontitis Who Require Orthopedic Treatment with Non-Removable Structures Using the “T-Scan system”." Galician Medical Journal 25, no. 3 (2018). http://dx.doi.org/10.21802/gmj.2018.3.6.

Full text

Abstract:

Determining the state of occlusal relations in orthopedic dentistry is an important step both for diagnosis and for treatment. For the purpose of their study, 65 patients with chronic GP of theІst and ІІnd degree of the development who needed an orthopedic treatment, were used the device “T-Scan III”. Patients had a partial (1-3) loss of teeth of III and IV classes according toKennedy; they were divided into two groups. Group I included 35 patients who had included defects and were not previously prosthetic, group II – 30 patients who had poor-quality bridges of different materials that needed

APA, Harvard, Vancouver, ISO, and other styles

40

Kerstein, Robert B., Prafulla Thumati, and S. Padmaja. "Force Finishing and Centering to Balance a Removable Complete Denture Prosthesis Using the T-Scan III Computerized Occlusal Analysis System." Journal of Indian Prosthodontic Society, April 25, 2013. http://dx.doi.org/10.1007/s13191-013-0287-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Fritz, F., N. Daratsianos, C. Bourauel, Spyridon N. Papageorgiou, and A. Jäger. "Changes in the distribution of occlusal forces in the course of the orthodontic retention phase." Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie, June 29, 2023. http://dx.doi.org/10.1007/s00056-023-00480-4.

Full text

Abstract:

Abstract Purpose Aim of the present study was to assess the relative distribution of occlusal forces after orthodontic treatment and during the first 3 months of the retention phase using a computerized occlusal analysis system (T-Scan, Tekscan Inc., Norwood, MA, USA). Materials and methods A total of 52 patients were included in this prospective cohort study and underwent analysis of occlusal forces on the level of tooth, jaw-half, and -quadrant during a 3-month period. Furthermore, differences between three retention protocols (group I: removable appliances in both jaws; group II: fixed 3–3

APA, Harvard, Vancouver, ISO, and other styles

42

Zabuga, Yulia, Oleksandr Bida, Oleksii Bida, Vitalii Bida, and Yaroslav Kravchenko. "Assessment of Local Factors Contributing to Occlusal Disturbances in the Replacement of Crown and Arch Defects with Fixed Dental Prostheses." SUCHASNA STOMATOLOHIYA, June 18, 2025, 132. https://doi.org/10.33295/1992-576x-2025-3-132.

Full text

Abstract:

Relevance. Based on the results of monitoring the dental health of the adult population, partial tooth loss, a complication of dental morbidity, remains at a high level, necessitating effective measures to replace it. The development of modern dentistry is aimed at increasing the involvement of digital methods in diagnostics, prosthetic planning, and the manufacture of orthodontic structures. According to the literature, the use of digital technologies enables the more accurate manufacture of dentures following the tissues of the prosthetic bed. Among the methods of comparative assessment of t

APA, Harvard, Vancouver, ISO, and other styles

43

Boukhris, Hanen, Sabrine Jlassi, Ameni Thabet, et al. "Reviewing the Advantages of T-SCAN System III as a Digital Occlusal Analysis System in Restorative Dentistry." International Journal of Innovative Science and Research Technology (IJISRT), April 2, 2024, 1808–12. http://dx.doi.org/10.38124/ijisrt/ijisrt24mar1660.

Full text

Abstract:

This comprehensive review article thoroughly investigates the benefits of utilizing the T-SCAN System III as a digital occlusal analysis tool in restorative dentistry. It encompasses a detailed examination of the system's evolutionary trajectory, including its various versions and generations, alongside comprehensive descriptions of its individual components and practical applications. Furthermore, it explores the system's wide- ranging utility in dentistry, serving as both a diagnostic aid for identifying occlusal issues and an assessment tool for validating patient occlusal integration of re

APA, Harvard, Vancouver, ISO, and other styles

44

Gowtham Neppala, Suresh Venugopalan, Dhanraj Ganapathy, and Sai Teja Reddy. "Digital Occlusal Analysis an Alternative Occlusal Indicator-A Review." Journal of Pharmaceutical Negative Results, October 17, 2022, 488–91. http://dx.doi.org/10.47750/pnr.2022.13.s07.065.

Full text

Abstract:

Background: All disciplines of dentistry require that clinicians assess the articulation of the teeth/prosthesis with respect to simultaneous contacts, bite force and timing.Aim: This article intends to describe the advantages and limitations of the data acquired when using a digital occlusal analysis as a dynamic occlusal indicator.Methodology: A search of the literature was completed (Medline, PubMed) using the keywords occlusion, occlusal registration, computerized occlusal analysis and T-Scan for dental.Results: According to the evidence available, the digital occlusal analysis system is t

APA, Harvard, Vancouver, ISO, and other styles

45

Sadry, Sanaz, and Bilgin Giray. "Evaluation of occlusion parameters using T-scan III in patients receiving fixed orthodontic treatment." APOS Trends in Orthodontics, February 27, 2023, 1–9. http://dx.doi.org/10.25259/apos_203_2022.

Full text

Abstract:

Objectives: The aim of this study is to examine the relationship between occlusal factors and temporomandibular joint diseases (TMD). Material and Methods: In our study, 43 individuals who had fixed orthodontic treatment and 20 individuals who did not need treatment at Istanbul Aydin University Faculty of Dentistry Department of Orthodontics were included in the study. Evaluations were made at the beginning of treatment (T0) and at 6 months (T1). T-Scan® computerized Occlusion Analyzer was used to evaluate the number of contact points, occlusal force parameters during centric occlusion and lat

APA, Harvard, Vancouver, ISO, and other styles

46

Oleksyn, Khrystyna, and Mykola Rozhko. "Use of Modern Methods of Diagnostic of Occlusal Disorders in Patients with Carious Disease." Galician Medical Journal 25, no. 4 (2018). http://dx.doi.org/10.21802/gmj.2018.4.8.

Full text

Abstract:

Occlusal disorders are one of the key problems in dentistry. They are observed at many dental diseases, resulted in the emergence of pathological processes in chewing system. Tooth decay is one of the factors that leads to disorders of occlusion. The purpose of our research is the study of occlusal disorders in patients with carious disease using modern methods of diagnostics, namely, technology of laser fluorescence and computer analysis of occlusion. 110 students of first 3 years of study at Ivano-Frankivsk National Medical University at the age of 17-20 with carious lesions of first molars

APA, Harvard, Vancouver, ISO, and other styles

47

Hisham, S.El Gabry, and M. Eissa and Mohamed A. Abuheikal Sherihan. "DIGITAL OCCLUSAL ANALYSIS AND ORAL HEALTH-RELATED QUALITY OF LIFE OF PATIENTS WITH 3D PRINTED COMPLETE DENTURES VERSUS CONVENTIONAL DENTURES." December 14, 2021. https://doi.org/10.5281/zenodo.5814756.

Full text

Abstract:

<strong>Background:</strong> 3D printed complete dentures fabrication with computer-aided designing and computer-aided manufacturing (CAD/CAM) techniques is becoming popular nowadays. However, studies that analyzed the occlusal forces distribution using recent digital methods as T-scan III and further evaluated the dentures effect on patient`s life quality were lacking. <strong>Objectives:</strong> Evaluation of the occlusal forces distribution using T-scan III, and evaluation of the oral health-related quality of life (OHRQoL) using Oral Health Impact Profile for Edentulous Patients

APA, Harvard, Vancouver, ISO, and other styles

48

Wang, Menglin, Le Liu, Xihua Ma, et al. "Computerized dynamic occlusal analysis and its correlation with static characters in post-orthodontic patients using the T-Scan system and the ABO objective grading system." BMC Oral Health 23, no. 1 (2023). http://dx.doi.org/10.1186/s12903-023-02868-5.

Full text

Abstract:

Abstract Objectives This study was conducted to detect the overall performance of both static and dynamic occlusion in post-orthodontic patients using quantified methods, and to ascertain the correlation between the two states of occlusion. Materials and methods A total of 112 consecutive patients evaluated by ABO-OGS were included in this study. Based on the pre-treatment Angle’s classification of the malocclusion, samples were divided into four groups. After removing orthodontic appliances, each patients underwent the American Board of Orthodontic objective grading system (ABO-OGS) and T-Sca

APA, Harvard, Vancouver, ISO, and other styles

49

Halili, Rajmonda, Alban Shabani, Lumturie Asllani, and Sebahate Hamiti Alidema. "Average Force Applied for Individual Tooth in All Ceramic Restoration." European Journal of General Dentistry, April 29, 2024. http://dx.doi.org/10.1055/s-0044-1781439.

Full text

Abstract:

Abstract Objectives Occlusion plays an important role in the retention and stability of dental restorations. Aim of this study was to analyze occlusal loading detected on dental elements in patients with unilateral partial edentulism—class III Kennedy, before and immediately after prosthetic treatment with a zirconia-based bridge in maximal intercuspation position with the help of electronic system T-scan III. Materials and Methods The research sample consisted of a total of 60 patients who, based on the preset selection criteria, were divided into two groups: control group with 30 (100%) pati

APA, Harvard, Vancouver, ISO, and other styles

50

Tansalarak, Ratchawan, Nattapat Khamnuengsitthi, and Mayurach Pipatphatsakorn. "Comparison of Postorthodontic Occlusal Force Distributions between Nonextraction and Extraction Treatment Approaches of Premolars for Orthodontic Treatment by Using T-Scan III System." European Journal of Dentistry, November 7, 2024. http://dx.doi.org/10.1055/s-0044-1789002.

Full text

Abstract:

Abstract Objective To compare bite force distributions in corresponding mouth regions between postorthodontic patients who underwent nonextraction and extraction approaches using the T-Scan III system (Tekscan, Inc, Massachusetts, United States). Materials and Methods Thirty-six postorthodontic patients were divided into two groups: (1) 18 subjects with the nonextraction treatment and (2) 18 subjects with the extraction of four first-premolar treatments. The measurements were performed using the T-Scan to collect the occlusal bite force at the maximal intercuspal position to generate the bite

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!