Academic literature on the topic 'Tables of organization and equipment'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tables of organization and equipment.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Tables of organization and equipment"
1
Abiola, Lawal, Adewumi Damisola Omolara, and Christiana O. Idiake. "Office Technology and Change Management amid Covid-19 Pandemic Study of Ikorodu Local Government, Lagos State, Nigeria." Advances in Multidisciplinary and scientific Research Journal Publication 8, no. 1 (2022): 9–18. http://dx.doi.org/10.22624/aims/sij/v8n1p2.
Full textAbstract:
Office technology has not only improved the efficiency of office work but changes the nature of office work in general. Office Technology is the use of electronic devices to increase performance in workplace, the development of office systems raises several issues for the organization. Invention of modern Office systems have the potential to bring about profound changes in organization, this changes, if not well managed will affect the aims and objectives of the organization. This paper detailed and focused on The challenges in advancement in Office Technology and the changes involved in organization, how changes in technology are managed for efficiency in an organization, especially during the Covid-19 pandemic in Nigeria, using Ikorodu Local Government as a case study. The study used descriptive statistics which include tables, percentages, and graph. Questionnaires were used as the major research instruments. Three hundred (300 ) questionnaires were distributed among workers in Ikorodu Local Government and Two Hundred (200) were returned, hence, the study population. Two main research questions were formulated to guide the study, relevant Technology and change Management theories were used in this study. Data collected were presented in frequency tables and percentages, graphical representation were made to analyze. Discussions were made to each table and figure. It was deduced from this study that the pandemic era has led to advancement in technology in office system, hence, change is inevitable in office scenario. Based on the findings, this study recommended among other things that, Change in organization should be gradual and there should be training and retraining of office workers that involves in the use of sophisticated office equipment to be able to cope with changes technology bring in the workplace Keyword: Automation, Organization, Change, Management, Worker Journal Reference Format: Lawal, A., Damisola, O. Adewumi & Idiake, C.O. (2022): Office Technology and Change Management amid Covid-19 Pandemic Study of Ikorodu Local Government, Lagos State, Nigeria. Social Informatics, Business, Politics, L:aw, Environmental Sciences & Technology Journal. Vol. 8, No. 1 Pp 9-18 Article DOI No - dx.doi.org/10.22624/AIMS/SIJ/V8N1P2. www.isteams/socialinformaticsjournal
2
Honsho, Cristiane dos Santos, Arianne Pontes Oriá, Luiz Paulo da Veiga Monteiro Lazaro Júnior, Francisco Dorea Neto, and José Luiz Laus. "The organization of flash electroretinography unit in Veterinary Medicine." Ciência Rural 34, no. 4 (2004): 1097–104. http://dx.doi.org/10.1590/s0103-84782004000400021.
Full textAbstract:
Electroretinography is the technique that allows the evaluation of changes in electrical potential that occur when the eye is stimulated by light. Such changes reflect the response of several retinal cells including photoreceptors (cones and rods). Thus it evaluates the retinal functionality and can diagnose abnormalities in retinas seem to be normal by ophthalmoscopy. Due to the constant evolution in veterinary ophthalmology, new centers of retinal electrophysiology have been introduced around the world either for early diagnosis of retinopathies or for preoperative evaluation of animals with cataracts and glaucoma, as well as for continuing research. The Ophthalmology Unit of the "Governador Laudo Natel" Veterinary Teaching Hospital, in the Faculty of Agronomic and Veterinary Sciences (FCAV) - Sao Paulo State University (UNESP) - Jaboticabal Campus, Brazil, supported by the Fundação de Amparo à Pesquisa do Estado de São Paulo - FAPESP (Sao Paulo State Foundation for Research), set up the Unit of Ocular Electrophysiology for animals in order to provide conditions for the diagnosis of retinopathies. As a pioneering venture in Brazil, the organization of the services faced many challenges till the moment it was set up: the organization and arrangement of appropriate rooms, independent electrical distribution for the installation of separate pieces of equipment, adaptation of containment tables, training and qualification of the staff, and the elaboration and standardization of anesthetic and stimulation protocols. The wealth of information generated by our experience gave us the inspiration to write this paper, which aims to contribute to the work of researchers and veterinary ophthalmologists in this new and opportune field of specialization.
3
Borysova, T., O. Usenko, and M. Ihnatenko. "STUDENTS’ SCIENTIFIC RESEARCH ACTIVITIES ORGANIZATION IN DESIGN AND PLANNING." Ukrainian professional education, no. 13 (October 27, 2023): 16–25. http://dx.doi.org/10.33989/2519-8254.2023.13.289915.
Full textAbstract:
In our research, the main attention is paid to the peculiarities of scientific research activities organization of students of various creative specialties, both standardized by curricula and educational programs of future specialist professional training, and voluntary during extracurricular time. The characteristic features of students’ mandatory (standardized) scientific research activity, which is related to the performance of coursework and qualification diploma theses, have been determined. We have also revealed a number of methods and means of voluntary, but motivated or interested involvement of student youth in scientific research activities through the performance of scientific, technical and project tasks by students during the period of industrial practices, participation in the work of educational and scientific laboratories, student design bureaus, design workshops associations and creative unions, fulfillment of production orders.
 Carrying out research projects encourages students to study and use innovative solutions, technologies, equipment, etc. In this way, the relationship between students’ scientific research and innovative activity in the process of professional training of future specialists in creative specialties is proven; in particular, examples of future engineers’ experimental scientific research activity and future designers’ project-technological artistic and creative scientific work are given.
 In the process of scientific research, the essence and significance of research and innovation activities of students of creative specialties have been determined for future specialists’ professional self-development and the formation of personal qualities, competencies, knowledge, abilities and skills in certain fields of knowledge.
 Forms of pedagogical guidance of students’ scientific research and innovative activities, methods and means of involving students to participate in scientific and practical conferences, round tables, exhibitions, professional competitions, as well as publication of the results of scientific research work in collections of student scientific works and catalogs of creative works are outlined.
4
Ali Yolah, Saidu,, Onyeaghala Obioma Hyginus*, and Gift J. Eke. "Effect of Workplace Physical Environment on the Productivity of Employees in Public Organization: A Study of the Central Bank of Nigeria, Jalingo Branch, Taraba State." Noble International Journal of Business and Management Research, no. 51 (January 21, 2021): 1–13. http://dx.doi.org/10.51550/nijbmr.51.1.13.
Full textAbstract:
This study sought to identify the effect of workplace physical environment on the productivity of employees. A case study approach was employed in this study and the Central Bank of Nigeria, Jalingo Branch served as the study area. The population of this study comprised of all the permanent staff of the Central Bank of Nigeria, Jalingo Branch which is made up of 70 employees; (executive’s staff cadre 10, senior staff 35 and Junior staff 25. The probability sampling technique was adopted to select elements from each cadre to give a sample frame of 60. Questionnaire that was validated and tested for reliability served as data collection instrument. Collected data were presented in frequency and percentage tables, and this formed the basis for data analysis. The null hypotheses were tested using Chi-Square statistical tool aided by SPSS version 23. Findings indicate that: Spacious physical work environment increases the productivity of employees. The productivity of employees increases in a work environment with availability of suitable equipment. Lastly, findings show that workplace environment with open communication increases employee productivity. Following the findings of this study, it is proposed that: organizations should provide spacious workplace physical environment for their employees because this substantially increases employees’ productivity. For the fact that the productivity of employees increases in a work environment with availability of suitable equipment, it means that organizations should act in accordance with this finding if they are to achieve employee productivity. Following the findings that work place environment with open communication increases productivity, it behooves on organizations to create work place environment charged with open communication and supportive to team spirit.
5
Vasconcellos, J. M. A., and R. G. Latorre. "BOAT-2000 Database: Market Study and Aid to Power and Sailboat Design." Marine Technology and SNAME News 37, no. 02 (2000): 79–87. http://dx.doi.org/10.5957/mt1.2000.37.2.79.
Full textAbstract:
This paper presents the BOAT-2000 database* organization. Its applications in market study as well as power and sailboats design are used to show the system capability for integrated design. BOAT-2000 is not a commercial system and was created to integrate recreational boat information and commercial design software for academic research. The BOAT-2000 aim is to join in a database the useful information on sail and powerboat design, manufacturers, equipment and test results. The database includes also specific naval architecture software and others functional software's. BOAT-2000 was developed in Microsoft ACCESS™ and follows four main objectives:simple and useful tool for boat market analysis,ability to arrange the design process,includes different sorts of boat information as test results and survey reports, andintegrates commercial softwares in boat design process. The paper focuses on database systematization and shows the BOAT-2000 application in two case studies. Graphs and tables illustrate the actual available dates. Finally, some future implementations are emphasized.
6
Kruzhylko, Oleg, Vitaliy Chukhlib, and Ihor Berezutskyi. "RISKS OF INJURY AND HEALTH DAMAGE WHEN USING BLACKSMITH EQUIPMENT." Labour protection problems in Ukraine 40, no. 1-2 (2024): 57–65. http://dx.doi.org/10.36804/nndipbop.40-1-2.2024.57-65.
Full textAbstract:
The article identifies the need to analyze the risks of injury and health damage when using blacksmith equipment which is due to the implementation of the latest technologies for the successful economic development of the country, the introduction of a risk-oriented approach, as well as the implementation of international standards in all sectors of the economy. It was noted that international standards are based on the use of a risk-oriented approach in solving issues of safety and occupational health of employees. Therefore, this requires the implementation of new approaches and the formation of new relationships in particularly dangerous areas of production. The general state of occupational injuries and deaths of workers in Ukraine for the period starting from 2022 to 2024 (four months of the current year) is given. The given data indicate an increase in the number of accidents at work which is further complicated by the war. These data indicate an increase in injuries at work which is a bad indicator and the need to implement modern risk-oriented technologies in the metallurgical industry. Analyzing the situation in the metallurgical industry where blacksmith equipment is widely used it should be noted that the main causes of injury and death of workers are organizational. This proves that the risk management system at enterprises is imperfect and needs to be improved and brought into line with international standards. Scientific approaches to determining the risks of injury and damage to the health of workers (operators) when using blacksmith equipment are considered. It is shown that modern technologies of metal processing by forging as one of the methods of pressure processing, use more and more robotic complexes which have risks associated with the organization of work in the conditions of the probability of physical impact of their individual elements and substances on workers. The dangerous and harmful factors that accompany the work of operators when using the MKP10 forging manipulator are given. The operation of the MKP10 manipulator is considered as an example. Tables and diagrams of the manipulator are made in accordance with the DSTU ISO 12100:2016 standard. The calculation of the risk indicator of the MKP10 manipulator was also performed which showed that the risk is average in terms of its damage and probability indicators. This leads to the need to apply risk management to control such risk and reduce it to acceptably small values.
7
Weng, Ho Yew. "Response Readiness and Safety Awareness in a Tier 3 Organization1." International Oil Spill Conference Proceedings 2003, no. 1 (2003): 751–53. http://dx.doi.org/10.7901/2169-3358-2003-1-751.
Full textAbstract:
ABSTRACT East Asia Response Pte Ltd is an organization based in Singapore and funded by major oil companies to respond to Tier 3 oil spills in the Asia Pacific Region. We have a large stockpile of Oil Spill Response equipment including aerial dispersant spraying capability. The call up of this equipment is not frequent. However, the infrequent call up presents a major challenge to us. The key challenges are:Maintaining a very high level of safety awareness. Routine activities are mainly maintenance and equipment testing. It is a major challenge to maintain a continuous high level of safety awareness in this environment. All Responders need to be prepared for the harsh conditions when they are called out. Responding to an oil spill in heat and rain in the tropics can stretch human endurance to the limit. In Singapore, priorities and response strategies can also change rapidly. Additionally, there is the pressure to get the job done, sometimes working long hours. The key drivers to our safety program are Risk Assessment (RA) and personal health. The risks associated with each major or new task are analyzed and processes / procedures are put into place to minimize or eliminate potential incidents. Funding will be appropriated where needed. RA has helped us understand each task better and is a way of life in the Base. For example, an RA was conducted when we had to renew our berth fenders. The exercise identified the most suitable time to carry out the renewal from the tide tables, how to manage the risk of a passing vessel creating too much water disturbance and the coordination required between those working on the wharf and at the fenders. We started a program to train external personnel whom we would call upon to supplement our staff during an incident. We need to train these personnel to work to our safety standards. An efficient Responder needs to be healthy and fit. We organize various programs in the Base like health talks by a specialist, gym memberships and participation in national health events to help Responders keep fit.Developing training scenarios to maintain a high level of response readiness. We developed a list of realistic exercises around Singapore for our Responders to practice. These exercises give us the luxury of assessing scenarios during non-response period and developing strategies on containment and recovery. Some of the exercises completed are: the booming of Sentosa, a major tourist attraction, and other sensitive areas as well as night navigation exercises to familiarize our boat skippers with potential changes in sea conditions and a changing coastline due to major reclamation work in Singapore.
8
Darwel, Darwel Darwel. "PENGELOLAAN LINEN RUMAH SAKIT DAERAH dr. ADNAAN WD PAYAKUMBUH SUMATERA BARAT." Human Care Journal 4, no. 3 (2019): 123. http://dx.doi.org/10.32883/hcj.v4i3.231.
Full textAbstract:
<p><strong><em>Abstract</em></strong></p><p><em>The organization of environmental health of the hospital is carried out according to the environmental health requirements of the hospital. One of the supporting factors for hospitals in restoring patient health is the provision of linen. Regional General Hospital Dr. Adnaan WD Payakumbuh is a type C regional hospital. Linen infectious and non-infectious patients used ex-patients or former health service activities are produced every day and no sorting of infectious and non-infectious linen is not done. Washing linen uses 1 washing machine to wash all types of linen, does not have a linen carriage storage room, coordination of linen staff with other parts, especially in repairing facilities and equipment is not optimal, linen managers still do not use personal protective equipment (PPE). This study aims to determine the description of linen management at Adnaan WD Payakumbuh Hospital. The research is descriptive with an observation approach. The research instrument used a checklist and measurements referring to the Kepmenkes RI No 1204 in 2004. The data were analyzed descriptively in the form of tables and percentages. The results of the 80% linen washout, 100% linen collection stage, 100% transportation stage, 100% acceptance stage, 100% washing stage, 80% storage stage, and 100% distribution stage fulfilled the requirements.</em></p><p><em>Keywords: infection, non-infection, linen, hospital</em><em></em></p>
9
Sabadosh, Ganna. "DEFINITION OF METHODOLOGY FOR FORMATION OF PROFESSIONAL SKILLS IN THE APPLICATION OF INNOVATIVE TECHNOLOGIES IN FUTURE RESTAURANT BUSINESS TECHNOLOGISTS." Bulletin of the National Technical University "KhPI". Series: Innovation researches in students’ scientific work, no. 2 (December 16, 2021): 59–67. http://dx.doi.org/10.20998/2220-4784.2021.02.08.
Full textAbstract:
In article theoretical and empirical methods of research have been used: essence of the concepts «innovation», «innovative activity», «innovative process», etc. are considered by the author. Classifications of innovations by various signs are investigated. Introductions of an innovative component to technology of food and the offer of special services, application of the interactive (electronic) menu of the screen tablet on tables, the touch display, application of a QR code in marketing of the enterprise, the LED technology of the notification, food 3-D printers, touch producers of food, use of three-dimensional projections for demonstration of preparation of dishes, automation and informatization of processes at the enterprises, use of web and telecommunication technologies is analyzed in the article. The main directions of development of modern technologies in institutions of restaurant economy are: creation of restaurants as Free Floor; opening of food-courts; creation of the conceptual enterprises of restaurant economy; expansion of a network of the virtual restaurants providing the order on the Internet and delivery to the consumer; preparations of dishes in the presence of visitors; organization of service for system catering and others. New ideas, advanced restaurant products and services, technological processes, forms of the organization and management will be result of innovative development of institutions of restaurant economy. Introduction of innovations isn`t cheap, however having offered exclusive menus and services for clients, restaurant institutions are capable to ensure a survival and profit. Processes of high-quality transformation of the sphere in general and ensuring competitiveness of her separate objects are result of introduction of innovative technologies of rendering of services and formation of service according to modern requirements. Innovative development of restaurant technologies increases competitiveness of an institution in modern severe conditions. It is necessary to pay attention to the main current trends of development of science and equipment, a novelty and the invention in food sphere and in the market of services.
10
De Leon, BS, MPH, Jacklynn, Sheniz Moonie, PhD, Jay J. Shen, PhD, Karen S. Gutierrez, BS, and Chad L. Cross, PhD, PStat®. "Opioid-related hospitalizations and intravenous drug users: Sociodemographic, spatial, and comorbid associations among hospital inpatients and community-based harm reduction organization participants." Journal of Opioid Management 17, no. 3 (2021): 195–205. http://dx.doi.org/10.5055/jom.2021.0630.
Full textAbstract:
Objective: To provide an updated analysis of opioid-related injuries in Nevada and provide a first-time analysis of the intravenous drug user (IDU) population within Clark County.Design: Cross-sectional study.Setting: Center for Health Information Analysis (CHIA) database and IDU data from Trac-B Exchange (Trac-B).Participants: Patients hospitalized for opioid-related causes (n = 9,064) and participants from Trac-B.Main outcome measure(s): Variables assessed included age, gender, and race/ethnicity. Zip codes were retrieved to find differences in geographical usage patterns of hospital or sterile injection equipment (SEP) sites. Contingency tables were utilized to determine the frequency of comorbidities. Additionally, GIS was used to investigate potential spatial patterns of interest.Results: Totally 5,268 out of the 9,064 opioid-related cases reported in Nevada were Clark County residents. The highest frequency for comorbidities associated with opioid-related hospitalizations (ORHs) included: infections, chronic bodily pain, and malnutrition. There was a higher proportion of 18-35-year-olds who used SEPs as compared to hospitals and a higher proportion of individuals aged 36 years or older who used hospitals as compared to using SEPs. Of the nearly 100 zip codes in Clark County, six showed a disproportionally high frequency of ORHs, and three comprised the majority of injection drug use.Conclusions: There is an opioid epidemic in Nevada that has contributed to addiction, heroin usage, injection drug use, and transmission of bloodborne diseases. Understanding the ORHs and intravenous drug use trends can help guide the development of program interventions.
Dissertations / Theses on the topic "Tables of organization and equipment"
1
Tarnoff, David. "Episode 4.02 – Truth Tables." Digital Commons @ East Tennessee State University, 2020. https://dc.etsu.edu/computer-organization-design-oer/30.
Full textAbstract:
In this episode, we introduce one of the most important tools in the description of logic operations: the truth table. Not only do truth tables allow us to describe a logic operation, they provide a means for us to prove logical equivalence.
2
Lampel, Joseph. "Strategy in thin industries : essays in the social organization of industry." Thesis, McGill University, 1990. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=74589.
Full textAbstract:
This dissertation is a study of strategy in thin industries, a class of industries whose members include the aircraft industry, jet engines, heavy electrical equipment, and diesel locomotives. These industries have a number of common features which inter-relate to produce a unique configuration. Foremost among the attributes that make up this configuration is the sparsity and magnitude of transactions on which the industry must subsist. The decrease in the number of transactions, and the increase in their size, results in a "thin" industry. The sparsity and size of transactions combine to produce complex, unstable, and highly interconnected environments. These environmental conditions motivate firms to develop external linkages with other organizations. The successful management of external linkages will frequently depend on knowledge and experience obtained in previous relationships. Many of the problems created by external linkages can only be resolved once they are formed. At the same time, the knowledge required to resolve these problems calls for previous experience.<br>The dissertation is divided into two parts. In the first three chapters we explore thin industries as a type and as an environment. In the remaining three chapters we look at the ramifications of interorganizational learning on the management of external linkages. In the concluding chapter we discuss the implications of thin industries to the study and practice of strategic management. Three issues in particular are singled out: the decline of organizational autonomy, the limits of competition, and new directions for theory building. (Abstract shortened by UMI.)
3
Kolyanovskaya, V. O. "Standard Providing the Property, Plant and Equipment in Budgetary Institutions." Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/7781.
Full text
4
Borello, José Antonio. "From craft to flexibility: linkages and industrial governance systems in the development of a capital-goods industry in Mendoza, Argentina, 1895-1990." Diss., Virginia Tech, 1993. http://hdl.handle.net/10919/37890.
Full textAbstract:
This thesis examines the development of a capital goods industry in Mendoza Argentina through an analysis of linkages and industrial governance systems. Linkages are material, informational, and financial flows among firms. Industrial governance systems are the social practices that cement linkages. Hence, linkages are understood as socially embedded and not as market transactions governed solely by price considerations.
The study has two major arguments. First, it claims that contrary to conventional industrial location theory firms do not locate in view of the previous existence of certain favorable factors, but rather construct these factors as they grow. This argument is operationalized by asking how firms generate in time their own linkages. Examples taken from the 1895-1990 period include labor and subcontractors, clientele, services, and the emergence of economic groups. Second, this study argues that the capital-goods industry in Mendoza is undergoing a Substantial (and unprecedented) transition in the way production is organized. The transition is part of the larger shift taking place at both the national and global scales. The analysis focuses on the historical pattern of linkages and governance systems in the industry, and contrasts that pattern with that of the recent decade.
Implicit in the previous two arguments are two territorial dimensions. First, the development of “industry produces regions" (Storper and Walker 1989). Second, at the intra-city level this means that the evolution of the industry (and specifically its linkage structure and governance systems) has a direct bearing on the direction and nature of the city’s growth.
These two arguments are illustrated through empirical work in Mendoza, a city of close to a million people in western Argentina. Over 100 interviews gathered over ten months reveal the origins, evolution, and current form of linkages in the capital-goods industry. These interviews are complemented by data from a variety of sources.
The main conclusions of the study are three. First, the study illustrates the richness and depth that emerges from a project based on substantial fieldwork. Second, it shows the advantages of conceiving industrialization not as the location of plants in response to favorable conditions, but as a process initiated by the firms themselves. Third, the dissertation shows that the capital-goods industry of Mendoza iS in a transitional phase towards new ways of organizing production. The transition is expressed in new linkage structures, new governance systems, and the emergence of new types of firms and institutional arrangements.<br>Ph. D.
5
Sandgren, Christoffer. "Ingenjörkompaniets förändring från NBG-08 till NBG-11 : - En myt eller sanning?" Thesis, Försvarshögskolan, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:fhs:diva-2704.
Full textAbstract:
Uppsatsen Ingenjörkompaniets förändring från NBG-08 till NBG-11 – En myt eller sanning? behandlar ingenjörkompaniet under Nordic Battlegroup-08 respektive Nordic Battlegroup-11. Uppsatsens skildrar de skillnader vilka fanns på respektive kompani avseende organisationen, materiel och utrustning samt de krav och uppgifter vilka kompaniet hade. Detta har genomförts med en komparation mellan de respektive kompanierna. Syftet med uppsatsen är att se vilken inverkan tidigare organisationer har på framställandet av en ny organisation under respektive Nordic Battlegroup. I detta fallet ingenjörkompaniet under respektive Nordic Battlegroup. En komparation mellan de två olika kompanierna innefattande tre av de grundläggande förmågorna verkan, rörlighet och uthållighet har genomförts kopplat mot två av krigsföringsförmågorna, konceptuella- och fysiska förmågorna. Resultatet av studien visar att slutsatser kopplade till i huvudsak brister kring kommunikationen mellan respektive ingenjörkompani där inget eller mycket begränsat erfarenhetsutbyte genomförts mellan dessa. Detta resulterade i att ingenjörkompaniets utveckling kan sammanfattas som uppbyggnaden av en helt ny organisation snarare än en reorganisation där erfarenheter och lärdommar hjälpt till att bygga upp den ”nya” organisationen.<br>The essay "Changes in the engineer coy between NBG-08 to NBG-11 - A myth or truth?" deals with the engineer company under Nordic Battlegroup-08 and Nordic Battlegroup-11. The essay depicts the differences that existed between the respective companies regarding organization, material and equipment, as well as requirements and tasks, and has been conducted through a comparison between the respective companies. The purpose of the essay is to see which effect earlier organizations has on the preparation of a new organization under the respective Nordic Battlegroup. In this case, the engineer company under the respective Nordic Battlegroup. A comparison between the two different companies, containing three of the basic skills: effect, movement and endurance, has been conducted linked to two of the warfare skills, conceptual and physical skills. The result of the study shows conclusions connected to mainly lack of communication between the respective engineer companies, where no, or very limited, experience exchanges have been made between them. This resulted in that the development of the engineer company can be summarized as the construction of a completely new organization rather than a reorganization, where experience and lessons learned could have helped building the "new" organization.
6
Faraday, Bruce Douglas History Australian Defence Force Academy UNSW. "Half the battle : the administration and higher organisation of the AIF 1914-1918." Awarded by:University of New South Wales - Australian Defence Force Academy. School of History, 1997. http://handle.unsw.edu.au/1959.4/38693.
Full textAbstract:
Administration of armies has been sadly neglected in historical studies but the ability of the AIF to develop an efficient system of administration and to fit into the equally efficient British system, had much to do with the success of the AIF, especially late in the war. The various Empire governments had made some preparations for an alliance system of fighting in the event of a major war, but in practice these needed a great deal of adjustment. This thesis examines the manner in which the dominions and Britain planned for a possible war and the way in which changes had to be made in practice. It examines the manner in which the AIF developed a system and the many facets of this system, which had developed a remarkable degree of efficiency by the end of the war. Because the AIF and CEF were so alike in size, composition and in the problem they faced, a recurring theme of the thesis is a comparison between the two. It embraces the following: a. Prewar preparation for a combined empire army. b. The organisation of the administrative system of the AIF and the manner this improved through the war. c. The organisation and problems of the CEF administrative system d. The development of a system of capitation to pay for the services supplied to the AIF and CEF. e. Supply of equipment. f. Manner in which both forces worked to maintain their forces. g. The manner in which both forces catered for the needs of the individual soldiers. h. Supply in the field i. Medical administration in the AIF j. The administration in the AIF k. The administration of discipline in the AIF l. The demobilisation of the AIF.
7
Mlynár, Peter. "Řízení stavební zakázky ve stavebním podniku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372078.
Full textAbstract:
This thesis deals with managing construction order in the construction company. The aim of thesis is to describe the process of preparation and execution of a construction. The theoretical part describes and explains basic concepts of project planning, then these concepts are applied to production of constructions. The practical part is based on my preparation of construction documentation on the construction project “Extension of production hall in Martin”.
8
Matuš, Ondřej. "Pavilon P brněnského výstaviště - vybrané části stavebně technologického projektu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226103.
Full textAbstract:
I deal with the constructive technological project about building of pavilion P on the technology side in my masters thesis. The aim is to solve the structure from the aspect of time and financial requirements. I deal in more detail with the project of site equipment, with description the execution of foundation constructions and with construction steelwork.
9
Kuchaříková, Vlasta. "Stavebně technologický projekt bytového domu typ M6,Brno-Slatina." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225446.
Full textAbstract:
In my masters thesis I deal with constructive technological project to build a residential building site technology. The aim is to solve the structure in terms of time, financial and material requirements based on technical data submitted by the designer and client requirements. Architectural and technological project of the thesis contains, in particular building equipment, technological regulations, schedule, financial budget, design mechanical assembly, inspection and test plan, health and safety, ZOV, waste management, etc.
10
Černý, Karel. "Rekonstrukce Hlavní budovy Plaveč – příprava a organizace výstavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225471.
Full textAbstract:
This thesis deals with reconstruction of the home for the elderly Plaveč main building. These reconstruction is primarily interior renovation, the rooms of clients and staff facilities, but also the surrounding of the building. All work will be in full operation. Consideration of this factor in the organization of construction is the main subject of this thesis, which shall include traffic contexts, costing, budget, time schedule, equipment of construction site, construction machinery, technology procedure, occupational safety and resources.
Books on the topic "Tables of organization and equipment"
1
Hays, J. J. United State[s] Army ground forces: Tables of organization and equipment, World War II. Military Press, 2003.
Find full text
2
Bevis, Mark. British and Commonwealth Armies, 1939-45: Supplement Volume 2. Helion and Company Ltd., 2005.
Find full text
3
Zaloga, Steve. US Armored Divisions: The European Theater of Operations, 1944-45. Osprey Publishing, 2004.
Find full text
4
Bevis, Mark. British and Commonwealth Armies, 1939-45: Supplement Volume 1. Helion and Company Ltd., 2005.
Find full text
5
American Institute of Chemical Engineers. Center for Chemical Process Safety., ed. Guidelines for process equipment reliability data with data tables. Center for Chemical Process Safety of the American Institute of Chemical Engineers, 1989.
Find full text
7
Draper, Alan G. European defence equipment collaboration, 1957-1987. St. Martin's Press, 1990.
Find full text
8
United States. Superintendent of Documents. School administration, buildings and equipment. U.S. G.P.O., Supt. of Docs., 1992.
Find full text
9
Slovenia) International Writers' Meeting (38th 2006 Bled. 38. Mednarodno srečanje pisateljev : Okrogle mize-- Prispevki = 38th International writers meeting : Round tables-- Papers = 38e Rencontre Internationale d'ecrivains: Tables rondes-- Communications. [s.n.], 2006.
Find full text
10
Ltd, Balmoral Marine. Balmoral Marine: Marine equipment reference handbook. Balmoral Marine, 1998.
Find full textBook chapters on the topic "Tables of organization and equipment"
1
Guzman, Ernesto A. "Equipment Tables of Organization." In Heavy Equipment Operation and Maintenance Manual. CRC Press, 2023. http://dx.doi.org/10.1201/9781003360667-3.
Full text
2
Bonner, Stanley F. "Equipment: organization: discipline." In Education in Ancient Rome. Routledge, 2024. http://dx.doi.org/10.4324/9781003483540-13.
Full text
3
Lidin, Serge. "Metadata Tables Organization." In .NET IL Assembler. Apress, 2014. http://dx.doi.org/10.1007/978-1-4302-6760-7_5.
Full text
4
Bonga, J. M., and P. von Aderkas. "Laboratory organization and equipment." In In Vitro Culture of Trees. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-015-8058-8_2.
Full text
5
Guzman, Ernesto A. "Security Organization." In Heavy Equipment Operation and Maintenance Manual. CRC Press, 2023. http://dx.doi.org/10.1201/9781003360667-23.
Full text
6
Guzman, Ernesto A. "Equipment Management Organization and Administration." In Heavy Equipment Operation and Maintenance Manual. CRC Press, 2023. http://dx.doi.org/10.1201/9781003360667-2.
Full text
7
Faltas, S. "The Internationalisation of Warship Equipment Industries." In Studies in Industrial Organization. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4470-1_4.
Full text
8
Barrett, Richard. "CVA data plots and tables." In The Values-Driven Organization. Routledge, 2017. http://dx.doi.org/10.9774/gleaf.9781315558530-37.
Full text
9
Slama, Dirk. "Organization." In The Digital Playbook. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-88221-1_17.
Full textAbstract:
AbstractThe final perspective in the AIoT Business Execution discussion is on the organization, which needs to support the creation and operation of AIoT-enabled products or solutions. The organizational setup is a potential Achilles’ heel: if this is not done properly, the entire initiative can be derailed. A number of different factors play a role here, from cultural aspects to proper alignment of the organizational structure with the key architectural elements of the product or solution. Owing to the large differences between Digital OEM and Digital Equipment operations from the organizational perspective, both will be discussed individually in this chapter.
10
Forster, E. "Control of scattered radiation, X-ray tables and ‘bucky’ stands." In Equipment for Diagnostic Radiography. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-4930-0_7.
Full textConference papers on the topic "Tables of organization and equipment"
1
Ebrahimi, Kaveh, and Saeid Rahimi Mofrad. "Pneumatic Test of Pressurised Equipment: Its Hazards and Alternatives." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84025.
Full textAbstract:
Pressure testing of pressurised equipment is crucial in establishing confidence that it is capable of performing the duty for which it has been designed and fabricated. A pressure test is usually mandated by pressurised equipment design codes for newly fabricated equipment. Also many regulations or industry codes for the design and fabrication of pressurised equipment require that a pressure test is performed on any modified in-service pressurized equipment to verify that the integrity of the equipment has not been compromised after such modifications. Although the usual and normally the preferred method of pressure testing is conducting a full hydrostatic test on the entire equipment (i.e. using a liquid medium, typically water), there may be occasions that a hydrostatic test is simply not practical. As an alternative to a full hydrostatic test, the designer may consider performing a localized pressure test or sometimes a full pneumatic test on modified equipment. It must be emphasized that a full pneumatic test can create extreme hazards to a facility and nearby personnel and therefore needs a careful and methodological assessment prior to being attempted on any equipment. This article is structured primarily as an attempt to assist the organizations in charge of design and inspection of newly fabricated or in-service equipment to identify general hazards associated with pneumatic test of pressurised equipment in a structured manner. An analysis of a simple cylindrical pressure vessel is presented to provide a better understanding of hazards associated with pneumatic test. Two tables in the paper provide the recommended exclusion zones from the equipment being pneumatically tested in order to reduce hazards associated with shock waves and/or projectile fragments. The paper also briefly explains alternative methods of testing in lieu of a full hydrostatic or pneumatic test. [1, 2]
2
Byun, Hoonseok, Jonghae Kim, Youngho Son, and Banuk Park. "Recent Activity of KEPIC Application for Construction and Operation of Nuclear Power Plants in Korea." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25530.
Full textAbstract:
Korea Electric Power Industry Code (KEPIC), a set of integrated standards applicable to the design, construction and operation of electric power facilities including nuclear power plants, has been developed on the basis of referring to the prevailing U.S. codes and standards which had been applied to the electric power facilities in Korea. KEPIC has been applied to the construction of Ulchin Nuclear Units 5&6 since 1997 as per the endorsement of Ministry of Education, Science and Technology (MEST), and is being completely applied to the construction of Shin-Kori and Shin-Wolsung Nuclear Power Plants (NPPs) in Korea. Although the technical requirements of KEPIC related to design and inspections for pressure vessels have been developed on the basis of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC), Korea Electric Association (KEA) that is KEPIC maintenance organization is trying to find and improve unreasonable requirements based on the acquired experiences for the continuous construction and operation of NPPs. In the administrative requirements, KEPIC, unlike ASME, adopted not only mechanical field but also electrical field related to NPPs. Furthermore, the qualifying system for services such as Nondestructive Examination, Heat Treatment, Design and Equipment Qualification Organization was adopted to improve safety and reliability for NPPs. In the technical requirements, KEA has been performing betterment study such as pressures for system hydrostatic test, temperatures for Post-Weld Heat Treatment (PWHT) of P-No. 4 materials, counterbore for Pre-Service Inspection (PSI) of elbows in piping systems. The construction method of Steel Plate Concrete (SC) structure studied by Korea Hydro & Nuclear Power Co., Ltd. (KHNP), has been adopted to KEPIC, recently. In the case of inservice NPPs, KEA is trying to establish the equivalent material tables for ASME unassigned materials to solve problems of material during the Repair & Replacement step. KEA is performing development study for Standard Welding Procedure Specification (SWPS) which can be used for production weld without any specific procedure qualification test performed by manufacturers in order to improve reliability and reduce costs. The SWPS will be adopted in KEPIC-MQW Appendix. KEA hopes to collaborate and grow with other Standard Development Organizations (SDOs) through the above efforts.
3
Ali, Asad, Kevin Maley, Seonyeob Li, Ahmed Al Owaid, and Abdulla Al Shehhi. "Roadmap for Digitalized Asset Integrity Management System." In Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/208117-ms.
Full textAbstract:
Abstract Asset integrity management system (AIMS) consisting of risk based inspection (RBI) and inspection management system (IMS) coupled with digitized equipment records and use of inspection tablets/mobiles will make paperless system for fast and timely decisions & actions. This paper provides a roadmap for implementation of an efficient and cost effective asset integrity management system that will increase the plant reliability & availability, decrease the time and efforts required for inspection, thus ultimately reducing the associated costs of operations. In this paper, the focus is towards digitalized AIMS that should make a company move to digital transformation and enabling it to adapt to industry 4.0 technologies such as artificial intelligence, augmented reality, data analytics, machine learning etc. First step is to perform a gap assessment of existing system to compare what is currently available within organization and what is required for going fully digital for AIM. Next step is to identify software features that are required for AIM digitalization and establish them as point based rating system which are used for rating best suitable software available in the market. Unique features for RBI module, inspection management module and field interface (tablet) module are identified with appropriate weightage to influence the software selection decision. Finally, an estimation of required resources, manpower timeline is provided that will guide in all phases of the implementation. Return on investment on such projects is manifolds. The digitalized AIM will greatly reduce the cost of day to to asset integrity management operations as it will no longer be needed to use multiple paper based reports and separate systems for RBI and IMS functions. Use of field tablet/mobile with possibility of artificial intelligence tools, will significantly reduce the time required for inspectors to do the on site inspection/testing & reporting. Interfacing of digitalized system with ERP/CMMS will automate the work order/notification system. Thus it will reduce an overall effort both in terms of time & money. The roadmap for digitalization of AIMS system will help any organization to make its AIMS digital and achieve the benefits of such system. The methodology provided is unique and can be adopted as best practices by the industry for digitally transforming the AIMS.
4
Kvamme, Bjarte O., Jino Peechanatt, and Ove T. Gudmestad. "Calculation of Time-to-Freeze for Liquids in Pipes." In ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-62000.
Full textAbstract:
In recent years, there has been unprecedented interest shown in the Arctic region by the industry, as it has become increasingly accessible for oil and gas exploration, shipping, and tourism. The decrease in ice extent in the Arctic has renewed the interest in the Northern Sea route, necessitating further research to evaluate the adequacy of the equipment and appliances used on vessels traversing in polar waters. In the oil and gas industry, exploration and production vessels and platforms are highly dependent on the piping facilities for rendering their intended function, and therefore, flow assurance is extremely crucial. If the winterization of pipes is not done properly, this could lead to massive cost overruns due to unplanned production shutdowns or even worse, accidents. A temperature drop between the different areas of the production facilities will change the thermodynamic properties of the fluids, and could cause the processing of the crude oil to become inefficient. The introduction of the Polar Code by the International Maritime Organization (IMO) attempts to mitigate some of the risks endangering the vessels in polar waters. The Polar Code is scheduled to take effect on 01.01.2017, and applies to all vessels traversing in polar waters. The Polar Code requires that all machinery installations and associated equipment required for the safe operation of ships shall be protected against the effect of freezing and increased viscosity of liquids, and that working liquids shall be maintained in a viscosity range that ensures the operation of the machinery. To account for this, the heat loss of pipes carrying liquid (water for fire extinguishing and hydraulic fluid amongst others) needs to be estimated and mitigating measures must be taken. In this study, methodology from the refrigeration industry is applied to calculate the estimated time to freeze for liquids in pipes. The methodology is adapted for use in the maritime industry, and results are presented in this study. The methodology used was found to be quite flexible, allowing for the calculation of complex scenarios and shapes, including the effect of varying degrees of insulation on pipes, and can easily be applied for approximating the best suitable method of insulating pipes to ensure flow assurance and maintain fluid properties at desired levels. Tables estimating the time-to-freeze for insulated pipes of different diameters and insulation thicknesses exposed to cross-winds of varying speeds are provided. The methodology is found to have great potential, and should be investigated further with experiments. The objective of the paper is thus to introduce the methodology for cold-climate engineering and use it for practical analysis of realistic estimates of insulated and non-insulated piping.
5
Iijima, Toru, Kenichi Suzuki, Tomokazu Higuchi, and Yuji Sato. "The Ultimate Strength of Cylindrical Liquid Storage Tanks Under Earthquakes: Seismic Capacity Test of Tanks Used in BWR Plants." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77064.
Full textAbstract:
Since 2002, Japan Nuclear Energy Safety Organization (JNES) has been carrying out seismic capacity tests. The condensate storage tank (CST) which is used in a BWR plant is one of the most important equipment from the viewpoint of seismic Probabilistic Safety Assessment (PSA). Many CST have the shape characteristics of a large diameter and relatively low height. And typical damage mode is expected to be elephant-foot bulge (EFB) or shear buckling. In this study, JNES performed shaking table tests using scaled models of the tank to clarify failure mode and ultimate strength, or acceleration level which caused failure of the tank. The excitation level was increased until the tank reached the failure mode, or ultimate state. In the excitation tests, EFB and shear buckling were observed, and the tank resulted in the ultimate state in which internal water leaked from cracks caused by shear buckling on the sidewall. The seismic capacity and dynamic response reduction effect were evaluated from test results, and the method to estimate seismic capacity of the thin walled cylindrical tank like CST using FEM analysis and the dynamic response reduction factor was proposed.
6
Martinova, Liliya, Sergey Sokolov, and Mikhail Babin. "Organization of Process Equipment Monitoring." In 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP). IEEE, 2019. http://dx.doi.org/10.1109/cscmp45713.2019.8976506.
Full text
7
Nomeer, Mohamed. "Intelligent Energy Platform." In International Petroleum Technology Conference. IPTC, 2021. http://dx.doi.org/10.2523/iptc-21252-ms.
Full textAbstract:
Abstract Turning an organization to an effective data driven decision making is vital factor to have and achieve digital transformation journey smoothly and successfully in the Energy sector, in which the energy industry has been trying to achieve the complete cycle Listen, Understand, effect and Decide rightly and quickly across the whole value chain such as HR, Finance, legal and contracts, operations, etc. since several decades where the software solutions were not in the priority list of the industry special the operations for many reasons, which created a serious of concequences which the industry is suffering from now such as listening carefully to the operations, understand the exact needs no matter how much we might save even if it’s 1 USD or 1 minute but do it correctly first time will save hours and millions later, silos in the organizations, distracted technologies not integrated, limitation of the technologies capabilities, people skills and compenetencies and the expectation the has been always set wrongly didn't support the industry to have organization reliance, security, safety, service quality and loyalty and reduce time and cost. With the current unprecedented crisis which are the COVID-19 and the massive oil crisis bundled together have created disturbance across the whole Energy industry which impacted the whole value chain not only for the Energy industry not the rest of the industries dramatically. The Panademic affect the whole key processes that the people used to for the last several decades, but the most important thing is change management process or manage to change process approach which is completely changed and from my opinion since years came true. Having the disruptive technologies will support the whole industry to come back much stronger than before as proven in other industries such as Aerospace and Defense, Telecome, Automative, Banking etc. The Intelligent Energy Platform focus on achieving what they couldn't achieve in the last decades through unique a approach towards the whole complete cycle Listen, Understand, effect and Decide, through developing and design a subway map for the whole workflows across the whole industry value chain integrating all the data sources together, by studying and remapping the whole processes, answering key four questions for each process, activity and tasks who, where, what and why, empowered machine learning with algorithms that will achieve the automation through digitizing and standardizing over a cognitive environment. There are several key pillars to get the digital transformation journey successfully and smoothly happening from my experience in the field operations, engineering, business, marketing and sales; Know and be clear on the end goal, which the Intelligent Energy Platform will include; select the right team from all the key stakholders, felexible and adoptable to change during the journey, tackle the exact needs for every process, activity and tasks, the power to change and update the solution at any given time, strong learning system, etc. In addition there are complimentary and network tool which is empowering the Intelligent Energy Platform that will expedite and support the journey massively, which is an advanced Infinity unique communication tool which is empower by all disruptive technology that will allow as an example all field engineers and management to be in one free Infinity business communication ' chatting' constructive and organize powered by disruptive solution where an example the engineer in a field and the operations has stopped for spare parts, equipment, machine, tool, etc. so he/she will send a normal message over our Infinity chatting app through the mobile or tablet and automatically this app will do a quick research in the back system, and display where it's available if it's within the country in another field, company, workshop, hence the engineer will click on the intended target, then automatically will go to the right approvals to approve on fly though the mobile or tablet, this will impact the performance of the operations massively and drop the non-productive time heavily by 20-30% and generate new business revenue in which few companies who are not utilizing all there equipment can rent to other sister companies and get revenue out of instead of just being in the workshop without any useful usage or productivity, it won’t stop by that only but will go to the contracts, legal, HR, etc. After implementing the solution and look to our demand graph, this free, perfect and instant unique communication app will allow the company immediately to see huge improvement on organization resilience which will reduce the time taken for any such request mentioned above from months to few days, organization will be more efficient, reduce cost by millions and millions meanwhile generate new business revenue by millions a well, enhance service customers loyalty and experience, improve decision making process, safety and security. this will impact directly the consumer surplus where the consumers who will be in this case the engineers will be willing to pay the gap based on the market preference and also avoiding the dead loss where the company will be financially and operationally more efficient. Not only that also transforming on people how they are communication through exchanging quickly photos expressing what they want to say, getting the attention quickly, make things faster in terms of decision that need to be taken through friends, families, and sometimes business as well with limitation. Digital is the only recourse and last hope for this industry to get out of its repeated pitfalls in the last decade and Intelligent Energy Platform will allow the industry and the whole value chain to be effectively integrated, tackle all the needs and requirements through Listen, understand, effect and decide to achieve a significant results, generate new jobs and roles and also will allow the industry to upturn again quickly and be able to face the upcoming expected and unexpected crisis. It's clear that the big players in the Energy industry are struggling because of several reasons but the most important factor is the digital path and develop digital solutions and one of the main issues is setting the right expectation which is related to the organizations, expectation and the experience across the whole ecosystem such operators, partners, vendors, etc. our Intelligent Energy Platform is focus on introducing an end-to-end platform solution focus on organization resilience, integrated technology, and completely agile complement by free, profit and instant app such as an infinity unique secured communication app, sharing experience business app, that focus on getting more and more networks to attract thousands and thousands of users and regain the trust and loyalty again in the industry. The unique secured communication app within the Intelligent Energy Platform which is n-sided with the engineers, service companies, management and business team will be zero-price quite close to the YouTube approach in terms of pricing strategy where it will be connecting n-sided with zero price and when it will expand it might be with negative price as well in which will allow 2/ 3 sided and even more to attract more users within the industries and enhance the service loyalty and quality, achieve one of the complex objective organization reliance, optimize performance, decision making and turn to data drive organization successfully and smoothly. Developing the Intelligent energy platform will allow our team to lead the platform approach in the Energy industry differently through free, profit and instant approach which will attract huge number of users who are looking for opportunities to gain the trust, loyalty again and feel secured. this will upturn the companies not only to find their ways throught the right approach but creating and developing new jobs and roles across the whole industry accompaniment significant contribution to the market revenue and profit.
8
Ozsoyoglu, Gultekin, Z. Meral Ozsoyoglu, and Francisco Mata. "A language and a physical organization technique for summary tables." In the 1985 ACM SIGMOD international conference. ACM Press, 1985. http://dx.doi.org/10.1145/318898.318899.
Full text
9
Kania, J., D. Hulek, P. Danko, and M. Novak. "Organization of Line Maintenance Hangar Equipment." In 2020 New Trends in Aviation Development (NTAD). IEEE, 2020. http://dx.doi.org/10.1109/ntad51447.2020.9379085.
Full text
10
Eshraghi, Shaun, Kristine Severson, David Hynd, and A. Benjamin Perlman. "Finite Element Analysis of the Passenger Rail Equipment Workstation Table Sled Test." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87751.
Full textAbstract:
Fixed workstation tables in passenger rail coaches can pose a potential injury hazard for passengers seated at them during an accident. Tables designed to absorb impact energy while minimizing contact forces can reduce the risk of serious injury, while helping to compartmentalize occupants during a train collision. The Rail Safety and Standards Board (RSSB) in the U.K. issued safety requirement GM/RT2100, Issue 5 [1] and the American Public Transportation Association (APTA) in the U.S. issued safety standard APTA PR-CS-S-018-13, Rev. 1 [2] with the goals of setting design and performance requirements for energy-absorbing workstation tables. The U.S. Department of Transportation, Federal Railroad Administration (FRA) Office of Research, Development and Technology directed the Volpe National Transportation Systems Center (Volpe Center) to evaluate the performance of the Hybrid-III Rail Safety (H3-RS) anthropomorphic test device (ATD), also known as a test dummy, in the APTA sled test in order to incorporate a reference to the H3-RS in the safety standard. The Volpe Center contracted with the manufacturer of the H3-RS, Transport Research Laboratory (TRL), in the U.K. to conduct a series of sled tests [3] with energy-absorbing tables, donated by various table manufacturers. The tables were either already compliant with the RSSB table standard or were being developed to comply with the APTA table standard. The sled test specified in Option A of the APTA table standard involves the use of two different 50th percentile male frontal impact ATDs. The H3-RS and the standard Hybrid-III (H3-50M) ATDs performed as expected. The H3-RS, which features bilateral deflection sensors in the chest and abdomen, was able to measure abdomen deflections while the H3-50M, which features a single sensor measuring chest compression, was not equipped to measure abdomen deflection. This study attempts to validate a finite element (FE) model of the APTA 8G sled test with respect to the thorax response of the H3-RS and H3-50M. The model uses a simplified rigid body-spring representation of one of the energy absorbing tables tested by TRL. The FE models of the H3-RS ATD and the H3-50M ATD were provided by TRL and LSTC, respectively. Results from the sled tests and FE simulations are compared using data obtained from the chest accelerometer, the chest and abdomen deflection sensors, and the femur load cells. Using video analysis, the gross motion of the dummies and table are also compared. Technical challenges related to model validation of the 8G sled test are also discussed. This study builds on previous analyses conducted to validate the abdomen response of the H3-RS FE model, which are presented in a companion paper [4].
Reports on the topic "Tables of organization and equipment"
1
DEPARTMENT OF THE ARMY WASHINGTON DC. Army Policies and Procedures for Establishing Multiple Component Modification Table of Organization and Equipment (MTOE) and Augmentation Tables of Distribution (AUGTDAs) Units. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada402529.
Full text
2
Caldwell, John F. Forced Entry: Does the Current Airborne Division Still Retain This Capability Under the Light Infantry Tables of Organization and Equipment? Defense Technical Information Center, 1987. http://dx.doi.org/10.21236/ada179595.
Full text
3
Valko, Nataliia V., Viacheslav V. Osadchyi, and Vladyslav S. Kruhlyk. Cloud resources use for students' project activities. [б. в.], 2021. http://dx.doi.org/10.31812/123456789/4444.
Full textAbstract:
The modern educational system proclaims learning aimed at acquiring practical skills and based on the activity approach. Educational research projects are the necessary component of curricula in physics, computer science, biology and chemistry. There is a problem of specialized equipment and facilities using for the implementation of such projects in distance learning. Therefore, the issue of cloud resources using for distance learning organization in robotics is relevant. The article presents a brief overview of the current state of projects development in Ukrainian schools and approaches used in foreign educational institutions in teaching robotics distantly. The article describes the stages of robotics projects development such as organizational, communicative, project work, summarizing. The peculiarities of the stages in distance learning and the possibilities of cloud technologies in robotics are also considered. The authors’ experience in projects developing in this environment for students and future teachers is described.
4
Panak and McCarthy. PR-312-08206-R03 Methods to Reduce the Greenhouse Gas Footprint from Pipeline Compressor and Pump Stations. Pipeline Research Council International, Inc. (PRCI), 2014. http://dx.doi.org/10.55274/r0010042.
Full textAbstract:
This report is intended to serve as an engineering reference document that reviews, considers, and evaluates the technical and economic viability of existing and developmental greenhouse gas (GHG) emission reduction technologies and work practices for application to natural gas pipeline compressor stations and hydrocarbon liquid pipeline pump stations. The report is arranged so readers can track information organized in tables in sequential sections. Following sections that provide an introduction and background, Section 3 lists GHG emission sources in three categories: combustion, vented, and fugitive sources (or equipment leaks). Section 4 lists GHG emission reduction technologies and work practices for each of the emission sources. Section 5 presents technical feasibility and emission reduction information for each technology and work practice. Section 6 presents costs and economic analysis for each technology and work practice. The mitigation approaches include developmental technologies and less information is provided for these examples. Appendices B through D provide detailed information for the technologies and work practices that are considered the highest potential.
5
Fatehifar, Mohsen, Josef Schlittenlacher, David Wong, and Kevin Munro. Applications Of Automatic Speech Recognition And Text-To-Speech Models To Detect Hearing Loss: A Scoping Review Protocol. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2023. http://dx.doi.org/10.37766/inplasy2023.1.0029.
Full textAbstract:
Review question / Objective: This scoping review aims to identify published methods that have used automatic speech recognition or text-to-speech recognition technologies to detect hearing loss and report on their accuracy and limitations. Condition being studied: Hearing enables us to communicate with the surrounding world. According to reports by the World Health Organization, 1.5 billion suffer from some degree of hearing loss of which 430 million require medical attention. It is estimated that by 2050, 1 in every 4 people will experience some sort of hearing disability. Hearing loss can significantly impact people’s ability to communicate and makes social interactions a challenge. In addition, it can result in anxiety, isolation, depression, hindrance of learning, and a decrease in general quality of life. A hearing assessment is usually done in hospitals and clinics with special equipment and trained staff. However, these services are not always available in less developed countries. Even in developed countries, like the UK, access to these facilities can be a challenge in rural areas. Moreover, during a crisis like the Covid-19 pandemic, accessing the required healthcare can become dangerous and challenging even in large cities.
6
S. Abdellatif, Omar, Ali Behbehani, Mauricio Landin, and Sarah Malik. Bahrain COVID-19 Governmental Response. UN Compliance Research Group, 2021. http://dx.doi.org/10.52008/ucrg0501.
Full textAbstract:
The International Health Regulations (2005) are legally binding on 196 States Parties, Including all WHO Member States. The IHR aims to keep the world informed about public health risks, through committing all signatories to cooperate together in combating any future “illness or medical condition, irrespective of origin or source, that presents or could present significant harm to humans.” Under IHR, countries agreed to strengthen their public health capacities and notify the WHO of any such illness in their populations. The WHO would be the centralized body for all countries facing a health threat, with the power to declare a “public health emergency of international concern,” issue recommendations, and work with countries to tackle a crisis. Although, with the sudden and rapid spread of COVID-19 in the world, many countries varied in implementing the WHO guidelines and health recommendations. While some countries followed the WHO guidelines, others imposed travel restrictions against the WHO’s recommendations. Some refused to share their data with the organization. Others banned the export of medical equipment, even in the face of global shortages. The UN Compliance Research group will focus during the current cycle on analyzing the compliance of the WHO member states to the organizations guidelines during the COVID-19 pandemic.
7
S. Abdellatif, Omar, and Ali Behbehani. Italy COVID-19 Governmental Response. UN Compliance Research Group, 2021. http://dx.doi.org/10.52008/itl0501.
Full textAbstract:
The International Health Regulations (2005) are legally binding on 196 States Parties, Including all WHO Member States. The IHR aims to keep the world informed about public health risks, through committing all signatories to cooperate together in combating any future “illness or medical condition, irrespective of origin or source, that presents or could present significant harm to humans.” Under IHR, states agreed to strengthen their public health capacities and notify the WHO of any such illness in their populations. The WHO would be the centralized body for all countries facing a health threat, with the power to declare a “public health emergency of international concern,” issue recommendations, and work with countries to tackle a crisis. Although, with the sudden and rapid spread of COVID-19 in the world, many countries varied in implementing the WHO guidelines and health recommendations. While some countries followed the WHO guidelines, others imposed travel restrictions against the WHO’s recommendations. Some states refused to share their data with the organization. Others banned the export of medical equipment, even in the face of global shortages. The UN Compliance Research group will focus during the current cycle on analyzing the compliance of the WHO member states to the organizations guidelines during the COVID-19 pandemic.
8
S. Abdellatif, Omar, and Ali Behbehani. Jordan COVID-19 Governmental Response. UN Compliance Research Group, 2021. http://dx.doi.org/10.52008/jord0501.
Full textAbstract:
The International Health Regulations (2005) are legally binding on 196 States Parties, Including all WHO Member States. The IHR aims to keep the world informed about public health risks, through committing all signatories to cooperate together in combating any future “illness or medical condition, irrespective of origin or source, that presents or could present significant harm to humans.” Under IHR, states agreed to strengthen their public health capacities and notify the WHO of any such illness in their populations. The WHO would be the centralized body for all countries facing a health threat, with the power to declare a “public health emergency of international concern,” issue recommendations, and work with countries to tackle a crisis. Although, with the sudden and rapid spread of COVID-19 in the world, many countries varied in implementing the WHO guidelines and health recommendations. While some countries followed the WHO guidelines, others imposed travel restrictions against the WHO’s recommendations. Some states refused to share their data with the organization. Others banned the export of medical equipment, even in the face of global shortages. The UN Compliance Research group will focus during the current cycle on analyzing the compliance of the WHO member states to the organizations guidelines during the COVID-19 pandemic.
9
S. Abdellatif, Omar, and Ali Behbehani. Saudi Arabia COVID-19 Governmental Response. UN Compliance Research Group, 2021. http://dx.doi.org/10.52008/ksa0501.
Full textAbstract:
The International Health Regulations (2005) are legally binding on 196 States Parties, Including all WHO Member States. The IHR aims to keep the world informed about public health risks, through committing all signatories to cooperate together in combating any future “illness or medical condition, irrespective of origin or source, that presents or could present significant harm to humans.” Under IHR, states agreed to strengthen their public health capacities and notify the WHO of any such illness in their populations. The WHO would be the centralized body for all countries facing a health threat, with the power to declare a “public health emergency of international concern,” issue recommendations, and work with countries to tackle a crisis. Although, with the sudden and rapid spread of COVID-19 in the world, many countries varied in implementing the WHO guidelines and health recommendations. While some countries followed the WHO guidelines, others imposed travel restrictions against the WHO’s recommendations. Some states refused to share their data with the organization. Others banned the export of medical equipment, even in the face of global shortages. The UN Compliance Research group will focus during the current cycle on analyzing the compliance of the WHO member states to the organizations guidelines during the COVID-19 pandemic.
10
Abdellatif, Omar, Ali Behbehani, and Mauricio Landin. Finland COVID-19 Governmental Response. UN Compliance Research Group, 2021. http://dx.doi.org/10.52008/fin0501.
Full textAbstract:
The International Health Regulations (2005) are legally binding on 196 States Parties, Including all WHO Member States. The IHR aims to keep the world informed about public health risks, through committing all signatories to cooperate together in combating any future “illness or medical condition, irrespective of origin or source, that presents or could present significant harm to humans.” Under IHR, countries agreed to strengthen their public health capacities and notify the WHO of any such illness in their populations. The WHO would be the centralized body for all countries facing a health threat, with the power to declare a “public health emergency of international concern,” issue recommendations, and work with countries to tackle a crisis. Although, with the sudden and rapid spread of COVID-19 in the world, many countries varied in implementing the WHO guidelines and health recommendations. While some countries followed the WHO guidelines, others imposed travel restrictions against the WHO’s recommendations. Some refused to share their data with the organization. Others banned the export of medical equipment, even in the face of global shortages. The UN Compliance Research group will focus during the current cycle on analyzing the compliance of the WHO member states to the organizations guidelines during the COVID-19 pandemic.