Relevant bibliographies by topics / Tank "Hold"

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Tank "Hold"'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tank "Hold".'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Tank "Hold""

1

Liu, Jinfeng, Guoqing Feng, Jiaying Wang, Tianwei Wu, Chen Xu, and Kai Yang. "Research on temperature distribution in container ship with Type-B LNG fuel tank based on CFD and analytical method." Brodogradnja 75, no. 3 (2024): 1–16. http://dx.doi.org/10.21278/brod75302.

Full text
Abstract:
The liquefied natural gas (LNG) fuel tank in a large container ship is loaded with liquid LNG at an ultra-low temperature (-163°C), there is a significant temperature difference in the cargo hold area where the entire fuel tank is located, which will have an important impact on the steel grade design and structural safety of the cargo tank in container ship. This paper develops two heat transfer models using Computational Fluid Dynamics method (CFD method) and an analytical method to analyze the temperature distribution in a large container ship equipped with Type-B LNG fuel tank. These models
APA, Harvard, Vancouver, ISO, and other styles
2

Yawalkar, Archis A., Vishwas G. Pangarkar, and Anthony A. C. M. Beenackers. "Gas hold-up in stirred tank reactors." Canadian Journal of Chemical Engineering 80, no. 1 (2002): 158–66. http://dx.doi.org/10.1002/cjce.5450800117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Boswell, Robert. "Specifying Water Tank Rehab." Materials Performance 50, no. 6 (2011): 48–52. https://doi.org/10.5006/mp2011_50_6-48.

Full text
Abstract:
NACE International’s CoatingsPro Magazine recently had the opportunity to ask a busy water tank inspector and specification writer some on-the-job questions about writing and enforcing the ideal specification. His answers, gained from more than three decades of coatings industry experience, hold true whether you specify, inspect, or apply protective coatings.
APA, Harvard, Vancouver, ISO, and other styles
4

Mahdewa, Prakash, and Mrs Kirti Sahu Tirpude. "Design The Circular Water Tank by Using the STAAD Pro Software." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (2022): 1678–92. http://dx.doi.org/10.22214/ijraset.2022.42622.

Full text
Abstract:
Abstract: Water tank are very useful for storage of water to involve the consumption of water we need to hold on to the capacity of water as much required. Now a day’s storage tank are suitable for all types of environment we live as old a civilized technique. Water is the common need for all the living organisms to survive. Portable water is imperative for good health of human beings. It is most important to supply portable water to every individual and every faction; hence it is very requisite to store water. Water is generally stored in the tanks the stored water is supplied to every factio
APA, Harvard, Vancouver, ISO, and other styles
5

Palmer, S. C. "Structural Effects of Foundation Tilt on Storage Tanks." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 206, no. 2 (1992): 83–92. http://dx.doi.org/10.1243/pime_proc_1992_206_204_02.

Full text
Abstract:
Vertical cylindrical tanks for bulk storage of oil and liquefied gas are sometimes constructed on soils that are susceptible to settlement. The types of foundation settlement and their structural effects on the tank are reviewed. An arbitrary operational limit of 1 in 200 is sometimes quoted for the foundation tilt of atmospheric storage tanks. This limit is based on aesthetic considerations and on the effects on pipework connections and other attachments. Many tanks reach this limit before the end of their design life, and tank owners face difficulties in assessing the effects of foundation t
APA, Harvard, Vancouver, ISO, and other styles
6

de Saporta, Benoîte, and Huilong Zhang. "Predictive maintenance for the heated hold-up tank." Reliability Engineering & System Safety 115 (July 2013): 82–90. http://dx.doi.org/10.1016/j.ress.2013.02.016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Suhartini, Suhartini, April Gunawan, and Rizky Muhammad Adhiwirayuda. "EFFORTS TO IMPROVE THE TANK CLEANING PROCESS TO SUPPORT THE FAST LOADING OF FUEL OIL IN MT. SUCCESS MARLINA XXXIII." Dinasti International Journal of Education Management And Social Science 2, no. 5 (2021): 785–90. http://dx.doi.org/10.31933/dijemss.v2i5.915.

Full text
Abstract:
The unpreparedness of the cargo hold tank will result in losses for the company. To produce a truly clean loading space, it is necessary to carry out tank cleaning according to procedures, with adequate infrastructure, planning and good coordination between the parties concerned. The theoretical basis used in this paper describes the procedures for cleaning tanks on appropriate tankers, because delays will cause huge losses for the company. This research is qualitative in nature by conducting interviews and direct observations to see the process of Tank Cleaning activities on the ship so that
APA, Harvard, Vancouver, ISO, and other styles
8

Mercado, M., and J. Hartwig. "Parametric analysis of the Charge-Hold-Vent method for cryogenic propellant tank chilldown." IOP Conference Series: Materials Science and Engineering 1301, no. 1 (2024): 012163. http://dx.doi.org/10.1088/1757-899x/1301/1/012163.

Full text
Abstract:
Abstract In the absence of external heat exchangers, the on-orbit transfer of cryogenic propellants requires the receiver tank to first be quenched to a sufficiently low energy state to allow for a continuous no-vent fill to avoid unnecessary venting of liquid. One proposed method for tank chilldown that minimizes the potential for venting liquid is the charge hold vent (CHV) method. CHV follows a cyclic process that gradually removes thermal energy from the receiver tank by injecting liquid with the vent valve closed and allowing the fluid and wall to reach near-thermal equilibrium before ven
APA, Harvard, Vancouver, ISO, and other styles
9

MacMillan, Kathleen, and Mary Gurnham. "Leaders Hold an Invitational Think Tank on Undergraduate Nursing Education." Nursing Leadership 26, no. 2 (2013): 25–28. http://dx.doi.org/10.12927/cjnl.2013.23451.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Frankiewicz, Sebastian S., and Szymon Woziwodzki. "Gas hold-up analysis in an unsteady stirred vessel by means of infinite series." Polish Journal of Chemical Technology 25, no. 2 (2023): 30–35. http://dx.doi.org/10.2478/pjct-2023-0014.

Full text
Abstract:
Abstract The use of a liquid level sensor made it possible to measure changes in gas hold-up over time in a stirred tank during unsteady mixing. These results were subjected to Fourier time series analysis and a model of gas hold-up changes in time was proposed. It allowed one to determine the model value of gas hold-up, which can be useful for characterizing gas hold-up during unsteady mixing and as a comparison to gas hold-up during steady mixing. The characteristic frequency was also determined, which corresponds to about twice the oscillation frequency. Model gas hold-up values for coalesc
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Tank "Hold""

1

Keefer, Keaton Andrew. "DEVELOPMENT AND VALIDATION OF AN ANALYTICAL CHARGE-HOLD-VENT MODEL FOR CRYOGENIC TANK CHILLDOWN." Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1364996750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Наливайко, П. В. "Бойова машина "Оплот"". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38875.

Full text
Abstract:
На сьогоднішній день в Україні гостро постала потреба військової техніки. На заводі імені Малишева у Харкові виробляють найсучаснішу бронетанкову зброю. Особливої уваги заслуговують танки: БМ «Булат» і БМ «Оплот».
APA, Harvard, Vancouver, ISO, and other styles
3

Carter, Alexander James. "Struggling to hold addiction treatment talk and relapse in mind." Doctoral thesis, University of Cape Town, 2014. http://hdl.handle.net/11427/12761.

Full text
Abstract:
Includes bibliographical references.<br>Addiction is a common problem, as is relapse. People often struggle to come to terms with and manage the intoxicating effects of substances and consequently need treatment. This dissertation focusses on treatment talk as it relates to addiction counselling in a residential setting in order to understand relapse and the addict’s return to treatment. Current treatment approaches that address addiction comprise several evidence-based approaches and yet relapse rates remain high. Attempts to explain this phenomenon are varied and interventions tend to have a
APA, Harvard, Vancouver, ISO, and other styles
4

Abid, Kifah Hussain. "New modelling and measurement techniques for liquid-liquid hold-up distribution in agitated tanks." Thesis, University of Bradford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358832.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Borgan, Nawal Sunna'. "Microbial regrowth of water supplies in Amman distribution system and house-hold water storage tanks." Thesis, University of Newcastle Upon Tyne, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245733.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rouillard, Thibault. "A Deep-Reinforcement-Learning Approach to the Peg-in-Hole Task with Goal Uncertainties." Thesis, Curtin University, 2020. http://hdl.handle.net/20.500.11937/85887.

Full text
Abstract:
The thesis proposed a framework to train deep-reinforcement-learning agents for fine manipulation tasks with goal uncertainties. It consisted of three aspects: state-space formulation, artificial training-goals uncertainties, and progressive training. The framework was used in a simulation for two fine manipulation tasks, square Peg-in-Hole and round Peg-in-Hole. The resulting behaviours were then transferred a physical robotic manipulator and compared to traditional training methods. The deep-reinforcement-learning agents trained using the framework in this work outperformed those trained wit
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Yihong. "Experimental Study of Multi-phase Flow Hydrodynamics in Stirring Tanks." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/77056.

Full text
Abstract:
Stirring tanks are very important equipments used for mixing, separating, chemical reaction, etc. A typical stirring tank is a cylindrical vessel with an agitator driving the fluid and generating turbulence to promote mixing. Flotation cells are widely used stirring tanks in phase separation where multiphase flow is involved. Flotation refers to the process in which air bubbles selectively pick up hydrophobic particles and separate them from hydrophilic solids. This technology is used throughout the mining industry as well as the chemical and petroleum industries. In this research, efforts wer
APA, Harvard, Vancouver, ISO, and other styles
8

Watson, Jay L. "Collective action problems and cumulative effects : addressing pollution of marine waters in Hood Canal, Washington /." Thesis, Connect to this title online; UW restricted, 2007. http://hdl.handle.net/1773/5515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lucchese, Antonio. "Analisi dei fenomeni di erosione interna nei rilevati arginali del fiume Panaro." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Find full text
Abstract:
Il lavoro di tesi ha come oggetto di studio i fenomeni di erosione interna che possono interessare le opere in materiali sciolti, facendo particolare riferimento ai rilevati arginali. Si inquadrano le generalità degli argini, i possibili meccanismi di rottura e quali sono i differenti meccanismi di erosione interna che possono interessare una sezione arginale. Inoltre, il lavoro illustra le varie categorie di test che permettono di stimare l’erodibilità di un terreno, dedicando maggiore attenzione all’Hole Erosion Test (HET): si descrive il funzionamento e la teoria della prova standard
APA, Harvard, Vancouver, ISO, and other styles
10

Zheng, Chi-Han, and 鄭祺瀚. "A Study of Hybrid Position/Impedance Control Applied to Peg-In-Hole Task with Robot Arm." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/17214399761093656119.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>材料科學與工程系<br>101<br>In manufacturing industries, peg-in-hole tasks are widely applied, such as phone manufacturing and automotive. Thus, in case of peg-in-hole, jamming easily occur because of position/orientation errors. That may damage the robot arm and work piece. For this reason, it is very difficult to peg-in-hole by only position control. In order to overcome this problem, it is necessary to join compliance control. In peg-in-hole process, robot arm generates compliance ability with change of the contact force. In this study, position control, impedance control and hybri
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Tank "Hold""

1

Haasler, Timm. Hold the Westwall: The history of Panzer Brigade 105, September 1944. Stackpole Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

István, Kocsis. A Szent Korona tana: Múltja, jelene, jövője. Püski, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kocsis, István. A Szentkorona-eszme időszerűsége: (a Szent Korona misztériuma és tana kérdéskörei-rövid áttekintés). Püski, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M, Garrison Denis, and McClintock Michael, eds. The five-hole flute: Modern English tanka in sequences and sets. Modern English Tanka Press, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shaolin, Liu, ed. Tian guo, long cheng: Xianggang sheng gong hui sheng san yi tang shi (1890-2009). Jidu jiao Zhongguo zong jiao wen hua yan jiu she, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

1897-1963, Tozer A. W., ed. The Counselor: Straight talk about the Holy Spirit from a 20th century prophet. Christian Publications, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Turi, Nicola, ed. Faulkner ed Hemingway. Due nobel americani. Firenze University Press, 2009. http://dx.doi.org/10.36253/978-88-8453-840-6.

Full text
Abstract:
Faulkner and Hemingway can probably be considered the greatest American writers of the twentieth century. In the mid 1960s, Fabbri entrusted the task of addressing their work and style to the militant critic Ruggero Jacobbi, who had shortly returned to Europe after a period of voluntary exile in Brazil. The two resulting volumes became pendant pieces in a unified meditation on the motives and movements of true poetry. Having become practically impossible to get hold of, Firenze University Press is now republishing them in the same format, preceded by an introduction by Nicola Turi. Thus the cr
APA, Harvard, Vancouver, ISO, and other styles
8

Boze, Hadleigh, ed. Holy matrimony!: Better halves and bitter halves : actors, athletes, comedians, directors, divas, philosophers, poets, politicians, and other celebs talk about marriage. Andrews McMeel, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Vesco, Silvia. Spontanea maestria. Fondazione Università Ca’ Foscari, 2020. http://dx.doi.org/10.30687/978-88-6969-426-4.

Full text
Abstract:
The appearance of Dr Vesco’s translation and study of Hokusai’s Ryakuga haya oshie, together with a full reproduction of the original book, is a matter of great excitement in the field of Japanese Studies. Hokusai has been known in Europe and North America for some 150 years. In his own country, he came to public attention about 1800, with youthful work produced under the name of Shunrô. He lived to the advanced age of 88, and when he died in 1849, he was one of the best-known artists in Japan. He was soon to be the best-known Japanese artist in the West, a status that he probably still holds.
APA, Harvard, Vancouver, ISO, and other styles
10

Sandler, Corey. Official Sega Genesis and Game Gear strategies, 3RD Edition. Bantam Books, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Tank "Hold""

1

Morales-Aragón, Isabel P., Roque Torres-Sánchez, Javier Gilabert, and Fulgencio Soto-Valles. "µ-Nautilus, an autonomous lightweight profiler with depth control and configurable sampling time." In Monitoring of Mediterranean Coastal Areas: Problems and Measurement Techniques. Firenze University Press, 2024. https://doi.org/10.36253/979-12-215-0556-6.84.

Full text
Abstract:
Coastal lagoons, such as Mar Menor, hold significant ecological importance but are vulnerable to environmental disruptions from resource exploitation. Continuous monitoring is crucial for understanding critical situations and assessing recovery efforts. Manual sampling, as used in Mar Menor, is costly and yields limited results. Therefore, demand exists for automatic methods to enhance data collection and reduce operational tasks. This paper presents the design of a compact autonomous submersible profiler, µ-Nautilus, building upon the previous s-Nautilus model. It weighs 11 kg, which is half
APA, Harvard, Vancouver, ISO, and other styles
2

Cuban, Sondra. "Care Talk Within Transnational Families: “I Hold Myself so I Don’t Cry”." In Transnational Family Communication. Palgrave Macmillan US, 2017. http://dx.doi.org/10.1057/978-1-137-58644-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cheok, Geraldine S., Marek Franaszek, Karl Van Wyk, and Jeremy A. Marvel. "Improving Automated Insertion Task in Robotics by Reducing Registration Error." In IFIP Advances in Information and Communication Technology. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72632-4_8.

Full text
Abstract:
AbstractA peg-in-hole operation is representative of common tasks performed in assembly lines by robots. It requires registration of the coordinate frame where a part resides to the robot frame where it is acted upon. Poor registration causes misalignment of the peg and the hole which will result in a failed insertion of the peg. In this study, the dependence of the outcome of the insertion task on the quality of registration is investigated. It was shown in earlier studies that Restoring Rigid-Body Condition (RRBC) leads to decreased target registration error. This study quantifies the improv
APA, Harvard, Vancouver, ISO, and other styles
4

Afifi, Nehal Atef, Marco Schneider, Ali Kanso, and Rainer Müller. "High Precision Peg-in-Hole Assembly Approach Based on Sensitive Robotics and Deep Recurrent Q-Learning." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-10071-0_1.

Full text
Abstract:
AbstractSensitive robot systems are used in various assembly and manufacturing technologies. Assembly is a vital activity that requires high-precision robotic manipulation. One of the challenges faced in high precision assembly tasks is when the task precision exceeds the robot’s precision. In this research, Deep Q-Learning (DQN) is used to perform a very tight clearance Peg-in-Hole assembly task. Moreover, recurrence is introduced into the system via a Long-Short Term Memory (LSTM) layer to tackle DQN drawbacks. The LSTM layer has the ability to encode prior decisions, allowing the agent to m
APA, Harvard, Vancouver, ISO, and other styles
5

Yamaguchi, Tomomi, Naomichi Furushiro, and Masahiro Higuchi. "Application of the Active Flexible Fixture to a Peg-in-hole Task." In Service Robotics and Mechatronics. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-694-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Persson, Rasmus. "Chapter 5. Three practices for confirming inferences in French talk-in-interaction." In Studies in Language and Social Interaction. John Benjamins Publishing Company, 2023. http://dx.doi.org/10.1075/slsi.35.05per.

Full text
Abstract:
Three practices for doing confirmation in French are investigated (repetition, the particle voilà and the adverb/adjective exact(ement)) as responses to inferences, i.e., requests for confirmation that display some understanding of prior talk. While broadly restricted to the context of inferences, at a level of finer action-sequential granularity the paper looks in turn at responses to four different types of inference-making confirmation-seeking first pair parts. The analyses show how each confirmation practice does slightly different work depending on the type of initiating action, while som
APA, Harvard, Vancouver, ISO, and other styles
7

Michaelsen, E., U. Ahlrichs, U. Stilla, D. Paulus, and H. Niemann. "Where Is the Hole Punch? Object Localization Capabilities on a Specific Bureau Task." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/3-540-45404-7_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Libreros, Jose Alejandro, Edwin Gamboa, and Matthias Hirth. "Mistakes Hold the Key: Reducing Errors in a Crowdsourced Tumor Annotation Task by Optimizing the Training Strategy." In Communications in Computer and Information Science. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-57982-0_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sinayah, Malarvizhi, Thanalachime Perumal, Kumanan Govaichelvan, Selvajothi Ramalingam, and Elanttamil Maruthai. "(De)legitimizing the 2021 Budget Allocation for Tamil Schools in a Talk Show." In Discursive Approaches to Politics in Malaysia. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-5334-7_5.

Full text
Abstract:
AbstractTamil vernacular schools provide access to education and career opportunities for Indian Malaysians. Tamil schools are perceived to be an important component of Indian minority rights, an avenue for the Tamil-speaking community to establish and institutionalize their language and cultural identity. However, the government reduced its allocation for these schools in the 2021 budget. Indian political leaders, shouldering the responsibility to channel the discontent among Indians, have raised concerns on various platforms, such as newspapers, social media, and television interviews. It is
APA, Harvard, Vancouver, ISO, and other styles
10

ABID, K. H., and J. G. GODFREY. "Laser Transmission Technique for Hold-Up Measurements in Agitated Tank." In Solvent Extraction 1990, Part B. Elsevier, 1992. http://dx.doi.org/10.1016/b978-0-444-88677-4.50055-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Tank "Hold""

1

Wyatt, Charles, and Jon O’Brien. "The Coating and Lining of the Largest Water Tank in the United States: the Martin Hill Reservoir Project." In SSPC 2003. SSPC, 2003. https://doi.org/10.5006/s2003-00054.

Full text
Abstract:
The City of Austin, Texas is the location of the largest water tank in the United States. This tank can hold up to 34 million gallons of water! This Major Project Presentation will describe how this massive structure was lined internally and painted externally by the combined efforts from both the private and public sectors. The key participants in this project are the City of Austin, Thomas Industrial Coatings, The Sherwin-Williams Company, and Dehumidification Technologies Inc.
APA, Harvard, Vancouver, ISO, and other styles
2

Lacasse, Gary A., and Donald Bechtol. "The Use of Desiccant Dehumidification During Surface Preparation and Coating Operations." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89076.

Full text
Abstract:
Abstract Cost reductions of up to 35 percent can be realized when desiccant dehumidification is used during blasting and coating operations inside of tanks and other closed areas. The destruction of the electrolytic cell will permit the contractor to hold a white-metal blast for over 45 days. The benefits, other than obvious cost reductions, are many. The incorporation of refrigeration during the summer and heating units during winter months enable tank lining projects to continue regardless of weather conditions. This paper will discuss these benefits and the concepts of psychrometrics and th
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Sulaiman, Saleh, Yousef Khuraibut, Sandip Kuthe, Sharad Londhe, and Mhammad Hashem. "Study on Glycol Reboiler and Surge Vessel Corrosion in Glycol Regeneration Unit." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13289.

Full text
Abstract:
Abstract Glycol systems are widely used in gas processing plants for the removal of contaminants such as moisture from the gas. Since the majority of the piping and vessels in these plants are fabricated from carbon steel, there is a high potential for corrosion. This paper provides a brief overview of some of the major corrosion mechanisms associated with Glycol regeneration unit. In addition, a case study from a triethylene glycol (TEG) regeneration system is also discussed where localized corrosion was noticed in the glycol reboiler and surge vessel. Booster Station facility receives gas fr
APA, Harvard, Vancouver, ISO, and other styles
4

Advincula, Rigoberto C. "3D Printing High Performance Polymers and the Oil and Gas Industry." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13505.

Full text
Abstract:
Abstract Additive manufacturing and 3D printing hold a number of promise in bringing on-demand and high-performance parts production capable of adding high value to the oil and gas industry. Non-metallic parts offer a number of advantages in reducing corrosion issues and enabling properties such as high-temperature resistance or reversibly, dissolvable or degradable properties. However, most parts used for completion and down-hole tools are still based on traditional molding, extrusion, thermoforming, etc. methods. 3D printing methods (FDM, SLA, SLA, VSP, etc.) holds promise in fabricating par
APA, Harvard, Vancouver, ISO, and other styles
5

Mills, George, and Johnny Eliasson. "Future Cargo & Ballast Tank Lining for Ship Tanks — Forward Looking Technology." In SSPC 2003. SSPC, 2003. https://doi.org/10.5006/s2003-00038.

Full text
Abstract:
Abstract The marine ship new construction market, with its large tanker ships, has changed in recent years following the unfortunate M/T Exxon Valdez, M/T Erika and M/T Prestige incidents, and the European’s early attempted early single skin ship phase out regulations. Significant modifications in ship design, including a double hull structure, have followed passage in the US Congress of the Oil Pollution Act of 1990 (OPA90). Regulations on double hull bulk ships are expected to follow shortly. The increased areas to be coated on each new construction project, coupled with the increased number
APA, Harvard, Vancouver, ISO, and other styles
6

Ferry, Kenneth W. "Cleaning Lined Tank Cars and Unlined Tank Cars for Lining Application." In CORROSION 1990. NACE International, 1990. https://doi.org/10.5006/c1990-90263.

Full text
Abstract:
Abstract Procedures for cleaning lined tank cars and unlined tank cars for lining application are generally not well defined. When an operator of a tank car fleet requires that a tank car be cleaned, it is usually done with little thought as to the determination of the proper method of cleaning in order to obtain the desired results Improper cleaning procedures used for a lined tank car could result in lining failure at the time of cleaning or after it is placed back in service. The same holds true for an unlined tank car being cleaned for lining application. Improper cleaning procedures could
APA, Harvard, Vancouver, ISO, and other styles
7

Lawrence, Ben, Christopher Blanken, Colin Theodore, et al. "Effect of Control System Augmentation on Handling Qualities and Task Performance in Good and Degraded Visual Environments." In Vertical Flight Society 70th Annual Forum & Technology Display. The Vertical Flight Society, 2014. http://dx.doi.org/10.4050/f-0070-2014-9514.

Full text
Abstract:
In June 2013, NASA and the U.S. Army jointly conducted a simulation experiment in the NASA-Ames Vertical Motion Simulator that examined and quantified the effects of limited-authority control system augmentation on handling qualities and task performance in both good and degraded visual environments. The vehicle model used for the experiment was the OH-58D with similar size, weight and performance, and the same 4-blade rotor system as the Bell 407 civilian helicopter that is commonly used for medical evacuation and emergency medical services. The control systems investigated as part of this st
APA, Harvard, Vancouver, ISO, and other styles
8

Jenkins, C. F., J. I. Mickalonis, D. A. Wilson, and G. T. Chandler. "Evaluation of Leak Seal Additives – Cooling Water Pipe in Nuclear Wastes." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05604.

Full text
Abstract:
Abstract Commercial leak seal products were evaluated for remote, short-term repair of leaks in water pipe in tanks containing radwaste. A liquid glass metallic product was identified for extensive testing after initial screening of four candidates. Testing was performed with manufactured holes and slits in sample pipe at ~50 psig nominal field pressure (.345 MPa), immersed in water or simulated waste. The maximum leaks sealed under field test conditions were a slit, 0.016 × 0.291 in. at leak rate 1.34 gpm (.406 × 7.39 mm, 5.07 L/min) and a 0.046 inch diameter hole at 0.63 gpm (1.17 mm hole, 2
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Ying, Dongsheng Li, and Zhi Wang. "Research on an Automatic Execution Device for Paired Axle Hole Assembly Task." In 2024 9th International Conference on Automation, Control and Robotics Engineering (CACRE). IEEE, 2024. http://dx.doi.org/10.1109/cacre62362.2024.10635089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Klyde, David, Paul Ruckel, Hong Xin, et al. "Piloted Simulation Evaluation of Attitude Capture and Hold MTEs for the Assessment of High-Speed Handling Qualities." In Vertical Flight Society 80th Annual Forum & Technology Display. The Vertical Flight Society, 2024. http://dx.doi.org/10.4050/f-0074-2018-12778.

Full text
Abstract:
Updates to the military rotorcraft handling qualities specification are currently being considered that address the high-speed flight regime envisioned for the Future Vertical Lift platform of the US Army. A team that features industry and academia have developed and evaluated a set of Mission Task Elements (MTEs) that have been defined to address VTOL high-speed handling qualities. Following the mission-oriented approach upon which ADS-33E-PRF is based, the MTEs were designed to meet different levels of precision and aggressiveness. The attitude capture and hold MTEs that are the subject of t
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Tank "Hold""

1

Peters, T. B., and F. F. Fondeur. Results of The Solvent Hold Tank Disposal Sample. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1637918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bannochie, C. J. Results of Hg speciation testing on MCU strip effluent hold tank (SEHT) and decontaminated salt solution hold tank (DSSHT) materials. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1221774.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bannochie, C. J. Results Hg speciation testing on tank 21 and solvent hold tank (SHT) material. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1215493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Peters, T. B. Results Of Routine Strip Effluent Hold Tank, Decontaminated Salt Solution Hold Tank, Caustic Wash Tank And Caustic Storage Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 6 Operations. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1115431.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Peters, T. B. Results Of Routine Strip Effluent Hold Tank, Decontaminated Salt Solution Hold Tank, Caustic Wash Tank And Caustic Storage Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 6 Operations. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1095612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Peters, T. B., and S. D. Fink. Results Of Routine Strip Effluent Hold Tank, Decontaminated Salt Solution Hold Tank, And Caustic Wash Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 4 Operations. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1055760.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bannochie, C. J. Results of Preliminary Hg Speciation Testing on Tank 21 and Solvent Hold Tank (SHT) Material. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1178651.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Peters, T. B., and F. F. Fondeur. Results Of Routine Strip Effluent Hold Tank And Decontaminated Salt Solution Hold Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 5 Operations. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1079574.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Peters, T., and S. Fink. RESULTS OF ROUTINE STRIP EFFLUENT HOLD TANK AND DECONTAMINATED SALT SOLUTION HOLD TANK SAMPLES FROM MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT DURING MACROBATCH 3 OPERATIONS. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1024187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Peters, T., and S. Fink. RESULTS OF ROUTINE STRIP EFFLUENT HOLD TANK AND DECONTAMINATED SALT SOLUTION HOLD TANK SAMPLES FROM MODULAR CAUSTIC-SIDE SOLVENT EXTRACTION UNIT DURING MACROBATCH 3 OPERATIONS. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1017434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Tank "Hold"' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography