Log in

Relevant bibliographies by topics / Technical and continuous formation / Journal articles

To see the other types of publications on this topic, follow the link: Technical and continuous formation.

Journal articles on the topic 'Technical and continuous formation'

Author: Grafiati

Published: 10 September 2021

Last updated: 17 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Technical and continuous formation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Nesterova, Lyudmila V. "CONTINUOUS TRAINING OF TECHNICAL SPECIALTIES STUDENTS OF THE EDUCATIONAL COMPLEX "COLLEGE-UNIVERSITY"." Yugra State University Bulletin 13, no. 1-1 (2017): 69–72. http://dx.doi.org/10.17816/byusu2017131-169-72.

Full text

Abstract:

The article deals with the problems of the stimulating continuous training of technical specialties students of the educational complex "college-university" on the example of the Yugra State University. The article deals with the principles of efficiency of the professional formation process into the specialist and conditions that affecting to promote the professional development of the individual student in the process of continuous professional training.

APA, Harvard, Vancouver, ISO, and other styles

2

Sidorov, Oleg, Alexandr Smerdin, Elena Butenko, Gleb Ermachkov, and Victor Philippov. "Developing the Continuous Monitoring Devices of the Contact Network Technical Condition Based on Modern Technical Solutions." Известия высших учебных заведений. Электромеханика 65, no. 4 (2022): 118–24. http://dx.doi.org/10.17213/0136-3360-2022-4-118-124.

Full text

Abstract:

The article presents an autonomous low-maintenance diagnostic device that can be connected to a single information network from a variety of devices according to the modular principle to create a distributed diagnostic system. An al-gorithm, the implementation of which makes it possible to establish the pre-failure state of the contact network is de-scribed. Technical solutions have been developed to achieve unlimited autonomy of the proposed complex both in terms of power supply conditions and in terms of data storage volume. The information on the received data pro-cessing technique for the

APA, Harvard, Vancouver, ISO, and other styles

3

Stroganov, K. V., A. K. Bastynets, D. D. L’vov, V. A. Murashov, and R. R. Salikhova. "High temperature fencing for continuous steelmaking unit." NOVYE OGNEUPORY (NEW REFRACTORIES), no. 5 (December 2, 2024): 60–66. https://doi.org/10.17073/1683-4518-2024-5-60-66.

Full text

Abstract:

A new method of iron recovery and continuous steel production with in-line vacuuming is described. Constructive solutions for refractory fencing are proposed, as well as the evaluation and selection of materials for the multilayer lining of the proposed installation. Technical solutions have been selected to extend the service life of high-temperature fencing using water-cooled panels that ensure the formation of a garnish. Numerical modeling of the process of the growth of the garnish layer is carried out.

APA, Harvard, Vancouver, ISO, and other styles

4

Xie, Minghui, and Hongwei Ren. "Research on UAV Formation Control under Deception Attacks." Frontiers in Computing and Intelligent Systems 12, no. 1 (2025): 157–64. https://doi.org/10.54097/7ncyst56.

Full text

Abstract:

With the rapid development of UAV technology and the continuous expansion of application scenarios, UAV formation control has become an important research direction in multi-agent systems. However, in complex network environments, deception attacks pose a serious threat to the security and stability of UAV formations. This paper systematically reviews the current research status of UAV formation control under deception attacks, providing an in-depth analysis from multiple dimensions, including research background, technical challenges, control methods, and security defenses. First, the develop

APA, Harvard, Vancouver, ISO, and other styles

5

DUDINA, Oksana, Iryna HOLOVKO, and Iryna CHERNYSHENKO. "Formation of translation competence in future vocational specialists: a systematic review." Espacios 42, no. 11 (2021): 39–46. http://dx.doi.org/10.48082/espacios-a21v42n11p05.

Full text

Abstract:

The integration of Ukrainian national higher education system into the global higher education and research space requires targeted reform of higher education in order to ensure its competitiveness. The priority of the development of higher education in Ukraine is the training of highly qualified, professionally competent professionals who are capable of self-realizing in the modern information society, are ready for continuous improvement and professional self-development. Modern scientific and technological progress is necessary for the socio-economic and cultural development of humankind, a

APA, Harvard, Vancouver, ISO, and other styles

6

Koptieva, Tetiana S., and Hryhoriy I. Denysyk. "Kryvyi Rih landscape technical system: development, current state and ways of optimization." Physical Geography and Geomorphology 44, no. 1 (2021): 25–29. http://dx.doi.org/10.17721/phgg.2021.1-3.03.

Full text

Abstract:

Peculiarities of formation and current state of one of the most powerful in Ukraine and Europe Kryvyi Rih landscape technical system are considered. It is noted that continuous and active development of the mining industry within Kryvyi Rih iron ore basin during 150 years has led to the formation of a unique structure of the landscape technical system. Its formation took place unevenly in space and time, which made it possible to identify and justify three stages of development: artisanal, initial industrial and active industrial one. It is shown that the new natural conditions and landscape s

APA, Harvard, Vancouver, ISO, and other styles

7

Moon, Bryan Sangho, Wangdo Lee, and Youngsoo Lee. "The Study for Technical Analysis on the Development Potential of Multi-Zone Oil, Gas in Crossfield, Canada." Energies 15, no. 18 (2022): 6860. http://dx.doi.org/10.3390/en15186860.

Full text

Abstract:

Crossfield is located in the province of Alberta in Canada and is one of the most well-known reservoirs of hydrocarbons. Since the 1950s, there has been continuous exploitation of more than 10 formations such as Cardium, Viking, Ellerslie, Elkton, Shunda, and Wabamun. Because of its location near the Foothills, the southwestern part of the Western Canada Sedimentary Basin, the Crossfield area has a complex geology and relatively deeper reservoirs, therefore requiring an in-depth examination of each formation. In this study, geological, technical, and economic analyses were performed on each fo

APA, Harvard, Vancouver, ISO, and other styles

8

Zhou, Qianling, Yan Tong, Hongwei Si, and Kai Zhou. "Optimization of Choreography Teaching with Deep Learning and Neural Networks." Computational Intelligence and Neuroscience 2022 (July 31, 2022): 1–9. http://dx.doi.org/10.1155/2022/7242637.

Full text

Abstract:

To improve the development level of intelligent dance education and choreography network technology, the research mainly focuses on the automatic formation system of continuous choreography by using the deep learning method. Firstly, it overcomes the technical difficulty that the dynamic segmentation and process segmentation of the automatic generation architecture in traditional choreography cannot achieve global optimization. Secondly, it is an automatic generation architecture for end-to-end continuous dance notation with access to temporal classifiers. Based on this, a dynamic time-stampin

APA, Harvard, Vancouver, ISO, and other styles

9

Зюзь, Володимир. "УДОСКОНАЛЕННЯ ЦІЛЬОВОЇ ТОЧНОСТІ ТА ЗМІСТУ НАВЧАЛЬНО-ТРЕНУВАЛЬНОГО ПРОЦЕСУ СПОРТСМЕНІВ 8–10 РОКІВ У НАСТІЛЬНОМУ ТЕНІСІ". European Science, sge23-02 (30 жовтня 2023): 117–27. http://dx.doi.org/10.30890/2709-2313.2023-23-02-006.

Full text

Abstract:

The continuous growth of the skills of athletes in table tennis makes it necessary to further improve their training system based on the use of modern tools and training methods.The solution to the issues of formation of special physical, technical and t

APA, Harvard, Vancouver, ISO, and other styles

10

Mikhelkevich, V. N., E. N. Chekanushkina, and A. I. Kardashevsky. "PROBLEMS OF SELF-ORGANIZATION OF INDEPENDENT WORK OF TECHNICAL UNIVERSITY STUDENTS IN THE CONDITIONS OF DIGITALIZATION EDUCATIONAL ENVIRONMENT." Izvestiya of the Samara Science Centre of the Russian Academy of Sciences. Social, Humanitarian, Medicobiological Sciences 24, no. 84 (2022): 19–25. http://dx.doi.org/10.37313/2413-9645-2022-24-84-19-25.

Full text

Abstract:

The subject of the article: the willingness of students to comply with sanitary and hygienic norms and rules aimed at maintaining health, working capacity during long-term continuous educational activities. The object of the article: selforganized/self-managed independent work of students of a technical university in an educational environment. The purpose of the work: to identify the attitude of students to mandatory and conscious compliance with sanitary and hygienic norms and rules in the process of performing strenuous long-term self-organized independent educational and cognitive activity

APA, Harvard, Vancouver, ISO, and other styles

11

Liu, Shangli, Haifeng Gai, and Peng Cheng. "Technical Scheme and Application Prospects of Oil Shale In Situ Conversion: A Review of Current Status." Energies 16, no. 11 (2023): 4386. http://dx.doi.org/10.3390/en16114386.

Full text

Abstract:

Petroleum was the most-consumed energy source in the world during the past century. With the continuous global consumption of conventional oil, shale oil is known as a new growth point in oil production capacity. However, medium–low mature shale oil needs to be exploited after in situ conversion due to the higher viscosity of oil and the lower permeability of shale. This paper summarizes previous studies on the process of kerogen cracking to generate oil and gas, and the development of micropore structures and fractures in organic-rich shale formations during in situ conversion. The results sh

APA, Harvard, Vancouver, ISO, and other styles

12

Sass, Ute, Wulf Killmann, and Dieter Eckstein. "Wood Formation in Two Species of Dipterocarpaceae in Peninsular Malaysia." IAWA Journal 16, no. 4 (1995): 371–84. http://dx.doi.org/10.1163/22941932-90001427.

Full text

Abstract:

The wood formation of kapur (Dryobalanops sumatrensis) and tembaga (Shorea leprosula), growing under a weak seasonal climate in West Malaysia was studied over a four-year period using cambium marking. Technical problems arose from the heavy callus formation due to the wounding of the cambium, the small radial increment, and the high variability of the cambial activity around and along the stem. Wood formation in the two tree species appears to be a continuous process and not related to seasonality in rainfall and phenology.

APA, Harvard, Vancouver, ISO, and other styles

13

Kaspersma, J. M., G. J. Alaerts, and J. H. Slinger. "Competence formation and post-graduate education in the public water sector in Indonesia." Hydrology and Earth System Sciences Discussions 9, no. 1 (2012): 629–69. http://dx.doi.org/10.5194/hessd-9-629-2012.

Full text

Abstract:

Abstract. A framework is introduced, describing three aggregate competences for technical issues, management and governance, and a meta-competence for continuous learning and innovation, for the water sector. The four competences are further organised in a T-shaped competence profile. The framework and an assessment methodology were tested in a case study on post-graduate water education for professional staff in the Directorate General Water Resources (DGWR) in Indonesia. Though DGWR professionals have a firmly "technical" orientation, both the surveys and interviews show strong interest in t

APA, Harvard, Vancouver, ISO, and other styles

14

KONDUR, Oksana, and Roman KONDRAT. "FORMATION OF DIGITAL COMPETENCE IN FUTURE SPECIALISTS." Mountain School of Ukrainian Carpaty, no. 31 (January 15, 2025): 96–98. https://doi.org/10.15330/msuc.2024.31.96-98.

Full text

Abstract:

The The article deals with topical questions of forming digital competence in future mining engineers in the context of digitalization of the mining industry. The concept, structure and specifics of digital competence, as well as modern technological trends in the industry, including robotization, artificial intelligence, the Internet of Things and digital twins, are analyzed. Particular attention is paid to the methodology of forming digital skills through the integration of modern technologies into the educational process, cooperation with manufacturing enterprises and continuous professiona

APA, Harvard, Vancouver, ISO, and other styles

15

Gubaev, Damir F., and Olga G. Gubaeva. "CONTINUING EDUCATION AND RETRAINING OF PERSONNEL." EKONOMIKA I UPRAVLENIE: PROBLEMY, RESHENIYA 4/9, no. 157 (2025): 193–99. https://doi.org/10.36871/ek.up.p.r.2025.04.09.023.

Full text

Abstract:

The authors of the article consider the concept of continuous education in the context of current economic conditions and the functioning of educational institutions. Also, the conditions necessary for improving the system of continuous adult education in the country are analyzed. Among the key tasks of professional continuous education, the following areas are highlighted: further development and modernization of the material and technical base of professional educational institutions; creation of specialized practice centers directly at enterprises; involvement of qualified specialists of en

APA, Harvard, Vancouver, ISO, and other styles

16

Drozdowska, Lucyna, and Janina Rogozińska. "The occurrence of glucosinolates during the flowering and maturation of oilseed rape (Brassica napus L.)." Acta Agrobotanica 35, no. 1 (2013): 25–29. http://dx.doi.org/10.5586/aa.1982.003.

Full text

Abstract:

It was found that in the vegetative organs of rape, glucosinolates are present in insignificant amounts and their content decreases toward development. Higher amounts were found in flower buds; in the course of seed formation, continuous accumulation of giucosinolates proceeds up to the stage of technical maturity. Among the glucosinolates, progoitrin predominated during all developmental stages.

APA, Harvard, Vancouver, ISO, and other styles

17

Sarankó, Ádám, Gábor Kalácska, and Róbert Zsolt Keresztes. "Analysis of Formed Chips in the Case of Turning Different Polymer Materials." Hungarian Journal of Industry and Chemistry 49, no. 2 (2021): 71–75. http://dx.doi.org/10.33927/hjic-2021-25.

Full text

Abstract:

In this paper, turning input parameters were defined for 12 different polymer materials that can be used in technical practices. Our goal was to determine turning input parameters where chip formation is favourable or continuous chips do not cause any problems. Our tests included the examination of detached chips and the values of the average surface roughness of the machined surfaces.

APA, Harvard, Vancouver, ISO, and other styles

18

Toporov, Vladimir, Alexander Khalezov, and Danis Nukhov. "Evaluation of the Effect of Holding the Mandrel in the Extreme Position of the FQM Mill on the Formation of Surface Defects." Solid State Phenomena 316 (April 2021): 375–79. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.375.

Full text

Abstract:

Modern continuous mills FQM are high-performance technological units that allow you to get products of a wide range. The paper presents the results of the study of the effect of the time of holding the mandrel in the extreme position of the continuous mill FQM (Fine Quality Mill) on the probability of defect formation of surface defects. The problems of сcomputational simulation of the process of continuous rolling of pipes were set and solved. It is established that the increase in the holding time of the mandrel allows to reduce the sliding of the metal on the surface of the tool, and contri

APA, Harvard, Vancouver, ISO, and other styles

19

Kaspersma, J. M., G. J. Alaerts, and J. H. Slinger. "Competence formation and post-graduate education in the public water sector in Indonesia." Hydrology and Earth System Sciences 16, no. 7 (2012): 2379–92. http://dx.doi.org/10.5194/hess-16-2379-2012.

Full text

Abstract:

Abstract. The water sector is dependent on effective institutions and organisations, and, therefore, on strong competences at the individual level. In this paper we describe competence formation and competence needs in a case study of the Directorate General of Water Resources (DGWR) in the Ministry of Public Works in Indonesia. A framework is introduced for the water sector comprising three aggregate competences for technical issues, management, and governance, and a meta-competence for continuous learning and innovation. The four competences are further organised in a T-shaped competence pro

APA, Harvard, Vancouver, ISO, and other styles

20

Molokanova, Elena. "Factors of formation self-development abilities among university students." Tambov University Review. Series: Humanities, no. 180 (2019): 24–30. http://dx.doi.org/10.20310/1810-0201-2019-24-180-24-30.

Full text

Abstract:

We substantiate the necessity of the student’s self-development ability formation in the conditions of multi-level educational programs implementation in a technical university. We ana-lyze various pedagogical and psychological approaches to the formulation and use in the relevant sciences concept of “self-development of a personality”. We explain the choice of a scientific ap-proach, in which self-development is defined as the process of purposeful activity of a personality in continuous self-transformation, conscious management of your own development, choice of goals, ways and means of self

APA, Harvard, Vancouver, ISO, and other styles

21

Molchanova, Regina V. "Accounting the features of aviation education in the formation of foresight technologies." ACCOUNTING AND CONTROL 6 (2024): 57–63. http://dx.doi.org/10.36871/u.i.k.2024.06.01.010.

Full text

Abstract:

The article characterizes the features of aviation education in the formation of foresight technologies. The composition of technical and technological features is revealed, reflecting the need to develop in graduates of aviation universities the ability to acquire new knowledge and skills in using information technology in aviation. The formation of universal engineering competencies and applied competencies is noted as an independent direction of the competency-based approach in aviation education to improve the research training of aviation specialists. The author presents in tabular form t

APA, Harvard, Vancouver, ISO, and other styles

22

Franko, Yuriy, Ivan-Stanislav Mazur, and Sergiy Kozibroda. "FORMATION OF TECHNICAL SKILLS OF FUTURE IT SPECIALISTS BY MEANS OF VISUAL PROGRAMMING." Collection of Scientific Papers of Uman State Pedagogical University, no. 2 (May 29, 2024): 73–79. http://dx.doi.org/10.31499/2307-4906.2.2024.306328.

Full text

Abstract:

In this article, the process of developing technical skills for future professionals in the field of information technology through the creation of web applications using visual programming is examined. The study analyzes the specific characteristics of using visual programming in the educational process, highlighting both its advantages and challenges. It describes modern approaches to teaching visual programming, including effective pedagogical strategies and techniques to enhance student engagement and learning outcomes.The article identifies the main components and stages of the process of

APA, Harvard, Vancouver, ISO, and other styles

23

Donchev, Alexander, and Mathias Galetz. "Suppressing the oxygen ingress into Ti-alloys by a one-step Al- plus F-treatment." MATEC Web of Conferences 321 (2020): 06003. http://dx.doi.org/10.1051/matecconf/202032106003.

Full text

Abstract:

Oxygen ingress into technical Ti-alloys during high temperature exposure in oxygen containing environments leads to an enriched surface zone due to the high oxygen solubility in titanium. This affected zone is known as alpha case and is embrittled compared to the substrate material. Therefore, the operating temperature of these alloys is limited. An enrichment of Al in the surface zone of Ti-alloys leads to an improvement by the formation of intermetallic TixAly-phases with decreased oxygen solubility. This one-step Al-enrichment plus a F-treatment is proposed for the formation of a continuous

APA, Harvard, Vancouver, ISO, and other styles

24

Kolmakova, Valentina, Denis Shalkov, and Olga Baryshnikova. "The educational potential of technical university educational space: system-activity aspect." E3S Web of Conferences 210 (2020): 18023. http://dx.doi.org/10.1051/e3sconf/202021018023.

Full text

Abstract:

Purposes of the work: 1) to reveal the educational potential of technical university educational space; 2) to consider the transfer mechanisms of cultural and historical experience from the point of view of the system-activity approach. Methodology. The educational potential of a technical university is revealed with the help of the methodological tools of social and psycho-pedagogical disciplines. Results. The article substantiates the need to present new requirements for the formation of an upbringing educational environment in a higher educational institution. The importance of creating fav

APA, Harvard, Vancouver, ISO, and other styles

25

Horoshkova, Lidiia, Vira Kharahirlo, and Іevhen Khlobystov. "Improvement of the continuous education services financing for vocational training." University Economic Bulletin, no. 45 (May 27, 2020): 195–206. http://dx.doi.org/10.31470/2306-546x-2020-45-195-206.

Full text

Abstract:

Actuality of research theme. In the current context of reforming the education sector, the problem of financial support for the initiated reforms needs special attention, since its success depends on the degree of its sufficiency. This fully applies to the system of vocational education, as in recent years the problem of shortage of workers has been actualized. It is possible to solve the problem of providing the leading branches of the national economy with personnel only in the conditions of sufficient level of financing of education in general and profesional-technical in particular.Problem

APA, Harvard, Vancouver, ISO, and other styles

26

Nikolaev, V. A. "Feasibility of continuous action unit parameters for road underlay formation." Russian Automobile and Highway Industry Journal 18, no. 3 (2021): 238–50. http://dx.doi.org/10.26518/2071-7296-2021-18-3-238-250.

Full text

Abstract:

Introduction. Russia has a large spatial disunity of settlements and other objects. Therefore, it is irrational to use low-productivity technical means of cyclical action in the construction of roads. To increase the pace of road construction, improve quality, reduce energy costs for road construction, where relief allows, it is economically feasible to use a set of units of continuous action. Continuous action units, moving one after another, will consistently perform a set of works, carrying out the full construction of the road by flow method. The complex should have a continuous action uni

APA, Harvard, Vancouver, ISO, and other styles

27

Huang, Yin, Shumin Huang, Yichen Zhang, Xue Yang, and Runda Liu. "Product Quality Tracing in Manufacturing Supply Chain Based on Big Data Technology." Recent Patents on Mechanical Engineering 13, no. 4 (2020): 340–51. http://dx.doi.org/10.2174/2212797613999200525135351.

Full text

Abstract:

Background: Big data technology has been widely used in manufacturing supply chain management. However, traditional big data technology has some limitations, and it cannot achieve the continuous improvement of whole-process product quality tracing. Objective : The purpose of this study is to overcome the limitations by patents analysis and provide new big data technology and technical modes to make the continuous improvements of whole-process product quality tracing for achieving effective product lifecycle management based on big data technology. Methods: The research method, patent analysis,

APA, Harvard, Vancouver, ISO, and other styles

28

Bostanov, B. О. "Unstressed combined trajectory of robot." Bulletin of the National Engineering Academy of the Republic of Kazakhstan 4, no. 78 (2020): 29–34. http://dx.doi.org/10.47533/2020.1606-146x.29.

Full text

Abstract:

The problem of forming a smooth combined trajectory of the robot and determining the position of the connection points, providing kinematic and dynamic smoothness conditions, is considered. Mathematical relations are obtained that express the conditions for connecting arcs of a trajectory without a jump in the radii of curvature at the joints. The proposed method provides the formation of complex technical forms and creates on their basis new models of the combined trajectory of a robot of continuous curvature.

APA, Harvard, Vancouver, ISO, and other styles

29

Bostanov, B. О. "Unstressed combined trajectory of robot." Bulletin of the National Engineering Academy of the Republic of Kazakhstan 4, no. 78 (2020): 29–34. http://dx.doi.org/10.47533/2020.1606-146x.29.

Full text

Abstract:

The problem of forming a smooth combined trajectory of the robot and determining the position of the connection points, providing kinematic and dynamic smoothness conditions, is considered. Mathematical relations are obtained that express the conditions for connecting arcs of a trajectory without a jump in the radii of curvature at the joints. The proposed method provides the formation of complex technical forms and creates on their basis new models of the combined trajectory of a robot of continuous curvature.

APA, Harvard, Vancouver, ISO, and other styles

30

Golubchenko, Alexander, and Leonid Khmara. "Formation of working equipment of increased efficiency for earthmoving and transport machines." Bulletin of Kharkov National Automobile and Highway University 2, no. 101 (2023): 88–98. http://dx.doi.org/10.30977/bul.2219-5548.2023.101.2.88-98.

Full text

Abstract:

Problem. The problem is low productivity when performing earthworks by earthmoving machines on long construction sites in road, transport, land reclamation construction, during repair and laying of main pipelines, construction of defense structures, which are related to the development of soil and its lateral transportation due to the predominant use machines of cyclic action. Increasing the efficiency of soil digging by bucket earthmoving and transport machines by reducing soil digging resistance and increasing the volume of soil in the bucket. Goal. Formation of new technical solutions of hi

APA, Harvard, Vancouver, ISO, and other styles

31

Yekimov, Sergey, Bayandy Ospanova, Anara Dosbenbetova, et al. "Axiological significance of axiological education for the preparation of students of technical specialties." E3S Web of Conferences 531 (2024): 05006. http://dx.doi.org/10.1051/e3sconf/202453105006.

Full text

Abstract:

In the modern information world, much attention is paid to the issue of training specialists in engineering and technical specialties, since their need is determined by high rates of scientific and technological progress. However, effective professional formation of specialists in technical specialties and their development as individuals is not possible without students' perception of socio-cultural values. The application of the axiological approach creates conditions for the successful assimilation of social values by students. The training of students of technical specialties should focus

APA, Harvard, Vancouver, ISO, and other styles

32

Kalemulloev, Munir, Alexey Platov та Anna Silaeva. "Integration of the controlling mechanism into the Deming-Shewhart PDСA cycle in the context of digitalization". SHS Web of Conferences 106 (2021): 01036. http://dx.doi.org/10.1051/shsconf/202110601036.

Full text

Abstract:

Digitalization provides an increase in the efficiency of production management, and also opens up wide opportunities for the formation of models of management decisions using predictive technologies. Digital technologies systematize and combine information flows of different origins. Thus, a predictive model of strategic and tactical production management is created. A condition for the successful digital transformation of economic sectors is the development of a set of measures for the technical re-equipment of enterprises. This article proposes an integrated controlling model based on the co

APA, Harvard, Vancouver, ISO, and other styles

33

Cai, Ji Hua, Xiao Ming Wu, and Sui Gu. "Anti-Collapse Drilling Fluids for the Cretaceous Scientific Drilling in Songliao Basin, China: A Case Study." Applied Mechanics and Materials 170-173 (May 2012): 1196–201. http://dx.doi.org/10.4028/www.scientific.net/amm.170-173.1196.

Full text

Abstract:

CCSD-SK1 well was the first Cretaceous scientific drilling well in the world, locating in Songliao basin, Northeast China. It included main well (also called north well) and south well. This paper introduced the anti-collapse drilling fluid technology in main well where the desired continuous coring section was from 164.77 m to 1792.00 m. Continuous technical barriers challenged the intelligence of drilling engineers of this project. First, preserving the wellbore stability was the most critical aspect of continuous core drilling. From top to bottom, the unconsolidated sandstone in the Quatern

APA, Harvard, Vancouver, ISO, and other styles

34

Haryanti, Nathalia, Natalia Puspadewi, Veronica Dwi Jani Juliawati, and Gisella Anastasia. "Description of The Professional Identity of First-Level Clinical Medical Students and The Various Factors That Facilitate Its Formation." Jurnal Pendidikan Kedokteran Indonesia: The Indonesian Journal of Medical Education 13, no. 2 (2024): 146. http://dx.doi.org/10.22146/jpki.91024.

Full text

Abstract:

Background: Identity formation is a longitudinal and continuous process. This study aimed to define: 1) the characteristics of professional identity (PI) of five first-year clinical students; 2) the role of clinical teachers and other factors that influenced PI formation during clinical rotations, and 3) how the learning process at the clinical level facilitates students to participate and gain recognition.Method: This was a qualitative phenomenological study. This study was open to any first-year clinical students who were undergoing their major clinical at the time of data collection and met

APA, Harvard, Vancouver, ISO, and other styles

35

Vaculíková, Hana, Pavel Vlček, Karel Kubečka, Jan Česelský, and Milan Nič. "Application of Risk Analysis by the Evaluation of Buildings Indoor Environment." Advanced Materials Research 899 (February 2014): 531–34. http://dx.doi.org/10.4028/www.scientific.net/amr.899.531.

Full text

Abstract:

In civil engineering we face up to a wide line of risks of mostly technical character (accident hazard, formation of damages or defects). At present a continuous tightening of cladding energy parameters happens within the sphere of residential and civic engineering. With buildings built in the end of the past century it is not possible to meet completely these requirements without a considerable intervention (and not only into the cladding). Risks acting to users of such objects resulting from its use can be evaluated using the risk analysis method.

APA, Harvard, Vancouver, ISO, and other styles

36

Koval, Yuliia. "PROJECT METHOD - MEANS OF FORMATION IN ENGINEERS OF TECHNICAL EDUCATION OF ECOLOGICAL CULTURE." Academic Notes Series Pedagogical Science 1, no. 204 (2022): 247–52. http://dx.doi.org/10.36550/2415-7988-2022-1-205-247-252.

Full text

Abstract:

The article describes the theoretical and methodological aspects of the project method and features of its implementation in the environmental training of applicants for technical education. It is shown that the project method is one of the effective methods of forming the ecological culture of students of technical vocational college, which allows to solve a certain environmental problem due to the independent actions of students of technical education with the mandatory display of results. It is emphasized the need to introduce project technologies in the education of technical college stude

APA, Harvard, Vancouver, ISO, and other styles

37

Blindu, Natalia. "Conducter Constantin Pigrov (1876–1962) and his role in the formation ”Doina” Academic Choral Chapel." Akademos, no. 1(76) (April 2025): 151–55. https://doi.org/10.52673/18570461.25.1-76.18.

Full text

Abstract:

Constantin Pigrov played a crucial role in the development and education of the first generations of choristers within the Doina Choral Chapel, becoming one of the most important conductors in the history of this ensemble. His methodological principles focused on intonational precision, voice development, and the musical ear training of the singers. His work as conductor of the Doina Choral Ensemble was based on talent selection, the formation of a diverse repertoire, and the continuous technical training of the performers. His methodology was materialized in the monograph Choral Leadership (1

APA, Harvard, Vancouver, ISO, and other styles

38

Pontes, Edel Alexandre Silva. "Mathematics teacher's continuing education in Professional and Technological Education: concepts and questions." Concilium 23, no. 13 (2023): 355–63. http://dx.doi.org/10.53660/clm-1568-23j13.

Full text

Abstract:

Professional and Technological Education (PTE) has as its basic assumption, to qualify the subject for a universal training based on social parameters predisposed to the work and the full exercise of citizenship. Based on a continuous formation, this study aimed to present suggestions that can refine the teaching praxis of the PTE teacher, minimizing the discrepancies between the dichotomy of the propedeutic education and the technical education, effective in the integrated high school technical courses (EMI), particularly in the Federal Institutes (IFs). This is a bibliographical research tha

APA, Harvard, Vancouver, ISO, and other styles

39

Endress, Gerhard. "The Language of Demonstration: Translating Science and the Formation of Terminology in Arabic Philosophy and Science." Early Science and Medicine 7, no. 3 (2002): 231–53. http://dx.doi.org/10.1163/157338202x00135.

Full text

Abstract:

AbstractThe reception of the rational sciences, scientific practice, discourse and methodology into Arabic Islamic society proceeded in several stages of exchange with the transmitters of Iranian, Christian-Aramaic and Byzantine-Greek learning. Translation and the acquisition of knowledge from the Hellenistic heritage went hand in hand with a continuous refinement of the methods of linguistic transposition and the creation of a standardized technical language in Arabic: terminology, rhetoric, and the genres of instruction. Demonstration more geometrico, first introduced by the paradigmatic sci

APA, Harvard, Vancouver, ISO, and other styles

40

Mozgov, S. A., N. I. Anelkin, A. V. Mantsevich, and D. G. Voytekhovsky. "The formation and development of OJSC “BSW – Management Company of Holding “BMC”, or 40 years of the Belarusian steel works: a modern view into the past, present and future." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 4 (January 10, 2025): 33–46. https://doi.org/10.21122/1683-6065-2024-4-33-46.

Full text

Abstract:

The year 2024 marks a significant milestone in the history of OJSC “BSW – Management Company of Holding “BMC” as October 15th commemorates the 40th anniversary of the first steel melting and casting on a continuous casting machine in the electric steelmaking shop.The purpose of this article is to provide a comprehensive modern perspective on the technical identity of the enterprise in honor of the 40th anniversary of OJSC “BSW – Management Company of Holding “BMC”. It unites past achievements, the present state, and a vision for mediumand long‑term development. Furthermore, it offers an overvi

APA, Harvard, Vancouver, ISO, and other styles

41

Alimjanovna, Pardaeva Khurshida. "ORGANIZATION OF INDEPENDENT WORK OF STUDENTS IN THE CONDITIONS OF CREDIT-MODULAR EDUCATION." CURRENT RESEARCH JOURNAL OF PHILOLOGICAL SCIENCES 03, no. 05 (2022): 104–9. http://dx.doi.org/10.37547/philological-crjps-03-05-23.

Full text

Abstract:

The article deals with the organization of independent work of students in the conditions of credit-modular education. The modernization of higher education, which is currently taking place, is inherently connected with the transition from the paradigm of learning to the paradigm of education. Today, the training of future biologists for continuous education and self-education, the formation of the need for them to independently acquire and replenish their knowledge, skillfully and quickly navigate the flow of various information: technical, reference, scientific, is relevant. This can be achi

APA, Harvard, Vancouver, ISO, and other styles

42

Li, Wenjun. "Study on the Influence of Contactless Delivery Service on the Repurchasing Consumption for Sichuan Consumers in the Post-COVID-19." Learning & Education 10, no. 8 (2022): 107. http://dx.doi.org/10.18282/l-e.v10i8.3077.

Full text

Abstract:

Contactless delivery would be considered an emerging online-to-offline mobile technology that foodservice businesses and customers have widely adopted. Especially in COVID-19, they have provided a two-way beneficial food delivery service in saving catering businesses and satisfying customers’ technical and psychological abnormalities. This study aimed to; get an overview of consumers’ overall perception of contactless delivery services; explore the overall status and formation mechanism of continuous use willingness of contactless distribution services; put forward corresponding improvement an

APA, Harvard, Vancouver, ISO, and other styles

43

Miastkovska, Marina, and Iryna Kobylyanska. "Pedagogical competence as a necessary component of professional competence of future technical specialists." Health and Safety Pedagogy 7, no. 1-2 (2023): 30–35. http://dx.doi.org/10.31649/2524-1079-2022-7-1-030-035.

Full text

Abstract:

The article addresses the pressing issue of developing pedagogical competence as an essential component of the professional competence of future professionals in technical specialties. Various aspects of the process of forming the investigated competence are considered, including its structure, components, and formation methods. It emphasizes that success in technical fields extends beyond technical skills and also requires professionals to effectively communicate, teach, and collaborate with others. The research underscores the importance of developing pedagogical competence in students of te

APA, Harvard, Vancouver, ISO, and other styles

44

Buchynskyi, Andrii, Taras Romanyshyn, Myroslav Buchynskyi, Lyubomyr Romanyshyn, and Michał Bembenek. "Ensuring efficiency of technical operation of equipment for workover operation." Production Engineering Archives 29, no. 3 (2023): 337–47. http://dx.doi.org/10.30657/pea.2023.29.39.

Full text

Abstract:

Abstract The priority of resources in the management system of influence on the system of technical operation of machines was evaluated. The proposed systemological model of information support for making managerial decisions regarding the technical operation of machines. The given analogy between the factors of technical influence and the resources required for this is substantiated. These are: “action” - “human resource”; “means” - “material resource”; “environment” - “information resource”. The priority of the information resource in ensuring the efficiency of the technical operation of the

APA, Harvard, Vancouver, ISO, and other styles

45

Lychkovskiy, Alexander A. "Technological regulation of the construction of the roadbed." Transportation Systems and Technology 6, no. 4 (2020): 73–87. http://dx.doi.org/10.17816/transsyst20206473-87.

Full text

Abstract:

Technological regulation of the construction of the roadbed becomes an integral part of the construction process. Continuous monitoring of soil characteristics at the construction stage is very important for all types of soil, especially for watered areas of soil and areas with high-temperature permafrost. Aim: Formation of a technical and technological system that operates on the principles of direct and feedback between the characteristics of geotechnical structures and the parameters of construction equipment for the most efficient and high-quality production of works. Methods:

APA, Harvard, Vancouver, ISO, and other styles

46

Maciel, Odair José, Débora Luana Ribeiro Pessoa, and Aline Sharlon. "Municipal public management and its impacts on teacher training." Concilium 23, no. 5 (2023): 431–41. http://dx.doi.org/10.53660/clm-998-23c26.

Full text

Abstract:

This study brings an approach to the relationship between Municipal Public Management and its relationship with Teacher Training and aims to analyze the relationship between Municipal Public Management and its impacts on teacher training, as well as the interweaving between both the parts. The problematic discussed comes from the question: how is the Municipal Public Management articulated in the promotion of the continuous formation of its teachers? What impacts does this action have on this audience? Regarding the methodological procedures, it is approach research, regarding the objectives i

APA, Harvard, Vancouver, ISO, and other styles

47

Nurlinayanti, ⁠Leni, Lucky Nugroho, Mudita Mudita, et al. "Circular Economy di Tingkat Desa: Pemberdayaan Karang Taruna dalam Pengelolaan Sampah Melalui Bank Sampah." Dedikasi : Jurnal Pengabdian Kepada Masyarakat 4, no. 1 (2025): 92–101. https://doi.org/10.53276/dedikasi.v4i1.238.

Full text

Abstract:

The problem of waste management in Ciputri Village triggers environmental pollution and low community welfare due to the lack of awareness of sorting waste from the source and the weak institution of waste banks. This Community Service activity aims to increase the technical and managerial capacity of The Youth Organization (Karang Taruna) as a driver of empowerment-based waste bank management. The approaches carried out include institutional assistance, technical training in waste sorting and processing, continuous education, and implementing an incentive-based waste savings system. The resul

APA, Harvard, Vancouver, ISO, and other styles

48

Kang, Sangbum, Yongjoo Choi, and Boyoung Kim. "Impact of Motivation Factors for Using Generative AI Services on Continuous Use Intention: Mediating Trust and Acceptance Attitude." Social Sciences 13, no. 9 (2024): 475. http://dx.doi.org/10.3390/socsci13090475.

Full text

Abstract:

This study aims to empirically analyze the relationship between the motivational factors of generative AI users and the intention to continue using the service. Accordingly, the motives of users who use generative AI services are defined as individual, social, and technical motivation factors. This research verified the effect of these factors on intention to continue using the services and tested the meditating effect of trust and acceptance attitude. We tested this through verifying trust and acceptance attitudes. An online survey was conducted on language-based generative AI service users s

APA, Harvard, Vancouver, ISO, and other styles

49

Raab, Georgy, Farid Utyashev, Rashid Asfandiyarov, et al. "Physical and Technical Foundations of the Use of Alternating Free Bending for Producing Long-length Semi-products from Metals and Alloys with Improved Mechanical Properties." Metals 10, no. 7 (2020): 879. http://dx.doi.org/10.3390/met10070879.

Full text

Abstract:

In this work, we give a theoretical justification of the non-monotonic character of strain in the process of refinement and formation of a grain-type structure during the deformation processing of low-alloyed copper heat-hardenable alloys. A regularity is revealed, suggesting the alternating behavior of the strain state in the process of the continuous bending of billets. It is found that the continuous free bending process in the conditions of multi-cycle (four cycles) processing increases the strength and produces a gradient-type structure and a gradient of mechanical properties. Using fabri

APA, Harvard, Vancouver, ISO, and other styles

50

Lychkovskiy, Alexander A., Svyatoslav Ya Lutskiy, Anatoliy Ya Landsman, and Nadezhda V. Navrotskaya. "Diagnostics of frost water accumulation and technological regulation of the construction of the roadbed." Transportation Systems and Technology 6, no. 2 (2020): 61–69. http://dx.doi.org/10.17816/transsyst20206261-69.

Full text

Abstract:

The relevance and content of technological regulation of production processes with continuous monitoring of changes in soil characteristics in areas of high-temperature permafrost due to the extremely unstable state of the roadbed during the work are substantiated. Aim: Formation of a technical and technological system that operates on the principles of direct and feedback between the characteristics of geotechnical structures and the parameters of construction equipment for the most efficient and high-quality production of works. Methods: Methods of technological regulation for th

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!