Log in

Relevant bibliographies by topics / Technical drafting

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Technical drafting'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Technical drafting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Technical drafting"

1

Lortie, S. "Providing Technical Assistance on Law Drafting." Statute Law Review 31, no. 1 (2010): 1–23. http://dx.doi.org/10.1093/slr/hmq004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Vito, Reinze L., Gemma D. Belga, and Myrna R. Batino. "Computer-Based Checker for Technical Drafting Plates: Development and Evaluation." INTERNATIONAL JOURNAL IN INFORMATION TECHNOLOGY IN GOVERNANCE, EDUCATION AND BUSINESS 1, no. 1 (2019): 46–57. https://doi.org/10.5281/zenodo.4592391.

Full text

Abstract:

The Computer-based Checker for Technical Drafting plates (CCTDp) was developed to assist the faculty and the students in senior high school to an objective, reliable and timely assessment of technical drawings under the five CAD competencies of the Department of Education. The LAN-based computer system includes features such as submission of technical drafting plates and deployment of scores and feedbacks. There are two (2) accounts developed for the checking software: the faculty and the students’ account used to access CSTDp. The scoring and feedback are based upon a TESDA TEC NC II as

APA, Harvard, Vancouver, ISO, and other styles

3

Ruslan, Faiq Amirul, Noor Hafizah Mahamarowi, Safinaz Mustapha, and Fadhilah Binti Aman. "Virtual Reality (VR) - The Effectiveness in Interior Architecture Technical Drafting." IOP Conference Series: Earth and Environmental Science 1217, no. 1 (2023): 012011. http://dx.doi.org/10.1088/1755-1315/1217/1/012011.

Full text

Abstract:

Abstract Technical drafting knew as drafting in detailed drawing. It is essential for communicating ideas in the industry by using familiar symbols, units of measurement, notation systems, visual styles, and page layouts using Virtual Reality (VR). Interior Architecture students spend most of their time creating those physical models or digital models instead of creating and developing ideas. However, lack of research and knowledge on technical drawing is one of the reasons that hard to understand and explore for the beginner level student. This research aims to develop a new interactive virtu

APA, Harvard, Vancouver, ISO, and other styles

4

Setiyo, Muji, Moehamad Aman, and Hary Abdul Hakim. "Technical note: Tips for drafting a mechanical patent." Community Empowerment 8, no. 5 (2023): 756–64. http://dx.doi.org/10.31603/ce.9270.

Full text

Abstract:

Patents have an important role in increasing the competitiveness of a nation. Patents encourage researchers and inventors to develop new ideas, which allows them to obtain exclusive rights to their inventions. However, many researchers have produced outputs in the form of prototypes, processes, and key methods for making tools or products, but some of them have not registered legal protection for their findings in the form of patents because they are not competent to draft patent documents. Therefore, this technical note presents practical steps in preparing patent documents, especially for no

APA, Harvard, Vancouver, ISO, and other styles

5

Vito, Reinze L., Gemma D. Belga, and Myrna R. Batino. "Computer-Based Checker for Technical Drafting Plates: Development and Evaluation." International Journal in Information Technology in Governance, Education and Business 1, no. 1 (2019): 46–57. http://dx.doi.org/10.32664/ijitgeb.v1i1.19.

Full text

Abstract:

The Computer-based Checker for Technical Drafting plates (CCTDp) was developed to assist the faculty and the students in senior high school to an objective, reliable and timely assessment of technical drawings under the five CAD competencies of the Department of Education. The LAN-based computer system includes features such as submission of technical drafting plates and deployment of scores and feedbacks. There are two (2) accounts developed for the checking software: the faculty and the students’ account used to access CSTDp. The scoring and feedback are based upon a TESDA TEC NC II assessor

APA, Harvard, Vancouver, ISO, and other styles

6

N. Bob-Eze, Nwamaka. "Capacity Building Needs for Manual and Computer Assisted Teaching of Pattern Drafting for Entrepreneurship in Tertiary Institutions in Nigeria." Journal of International Education and Practice 6, no. 2 (2023): 25. http://dx.doi.org/10.30564/jiep.v6i2.5534.

Full text

Abstract:

This study investigated the capacity building needs for manual and computer assisted teaching of pattern drafting for entrepreneurship in tertiary institutions in Nigeria. The study was conducted and guided by two research questions and two hypotheses. This study adopted an ex-post facto research design. The population for the study consisted of 131 Home Economics lecturers from the Universities, Polytechnic, and Colleges of Education in South East Nigeria. The entire population was studied because of its manageable size, hence there was no sampling. The results of this study showed that the H

APA, Harvard, Vancouver, ISO, and other styles

7

Eunice, Ifenyinwa Ugwu, Ndidiamaka Ezeaku Margret, Ijeoma Attah Blessing, M. Emeghebo Udochukwu, and Chekwube Eze Emmanuel. "Application of Computer Aided Design (CAD) and Flat Techniques in Teaching Pattern Drafting by Clothing Lecturers in Universities in South East, Nigeria." Application of Computer Aided Design (CAD) and Flat Techniques in Teaching Pattern Drafting by Clothing Lecturers in Universities in South East, Nigeria 2, no. 1 (2023): 29–43. https://doi.org/10.57012/ijhhr.v2n1.003.

Full text

Abstract:

<strong>Abstract: </strong>The purpose of the study was to investigate the application of computer aided design (CAD) and Flat techniques in teaching pattern drafting by clothing lecturers in Universities in South East, Nigeria. The population for the study was 48 lecturers. The entire number of Clothing lecturers in the above three universities were used because of the manageable size. A questionnaire was utilized for data collection (0.94 Cronbach’s alpha). Data collected were analyzed using mean and standard deviation. The major findings of the study showed that some of the chall

APA, Harvard, Vancouver, ISO, and other styles

8

Rodas Marín, Bolivar. "Guide for the drafting specific technical specifications for civil works." Estoa 2, no. 3 (2013): 45–52. http://dx.doi.org/10.18537/est.v002.n003.04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

International Monetary Fund. "Uganda: Technical Assistance Report-Drafting the Public Finance Management Regulations." IMF Staff Country Reports 17, no. 267 (2017): 1. http://dx.doi.org/10.5089/9781484317730.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Rade, Stefanus Don, Mary Grace Megumi Maran, and Yohanes Leonardus Ngompat. "PKM METODE PENYUSUNAN PERATURAN DESA DI DESA SUNSEA KECAMATAN NAIBENU KABUPATEN TIMOR TENGAH UTARA." Devote : Jurnal Pengabdian Masyarakat Global 4, no. 2 (2025): 208–14. https://doi.org/10.55681/devote.v4i2.4004.

Full text

Abstract:

Village Regulations play an important role in regulating the lives of village communities so that they are more directed, fair, and in accordance with local needs. However, many village governments still experience obstacles in its preparation, especially in terms of legal procedures and community participation. This community service activity was carried out in Sunsea Village with the aim of providing training and technical assistance to village officials, BPD, and community leaders regarding methods of drafting Village Regulations in accordance with laws and regulations. Activities were carr

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Technical drafting"

1

Meister, Marv. "A needs assessment for the Electrical Controls Drafting course in the Mechanical Design Technician Program at Northeast Wisconsin Technical College Green Bay." Online version, 1999. http://www.uwstout.edu/lib/thesis/1999/1999meisterm.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

LaVigne, Bryan. "Evaluation of Northcentral Technical College's drafting and design curriculum." Menomonie, WI : University of Wisconsin--Stout, 2004. http://www.uwstout.edu/lib/thesis/2004/2004lavigneb.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Yeung, Kai-hing Lionel. "The changing curriculum : from manual drafting to computer aided design (CAD) /." Hong Kong : University of Hong Kong, 1998. http://sunzi.lib.hku.hk/hkuto/record.jsp?B20057453.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Yeung, Kai-hing Lionel, and 楊啓興. "The changing curriculum: from manual draftingto computer aided design (CAD)." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1998. http://hub.hku.hk/bib/B31960571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Culhane, Daniel J. "Development of a computer-aided drafting system for technical theatre." 1985. http://catalog.hathitrust.org/api/volumes/oclc/12528561.html.

Full text

Abstract:

Thesis (M.F.A.)--University of Wisconsin--Madison, 1985.<br>Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 157-158).

APA, Harvard, Vancouver, ISO, and other styles

6

Chen, Chen-Liao, and 陳鎮潦. "A Study on the Correlation between Studying Technical Illustrations and Enhancing Spatial Abilities among Mechanical Drafting Department Students." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/81075404789913262226.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>工業教育學系在職進修專班<br>91<br>The purpose of this study is to explore the correlation between studying technical illustrations and enhancing spatial abilities among vocational high school students. This research benefits curriculum planning, textbook editing and teaching. To achieve these goals, the researcher refers to former references as the theory basis and the research design ideas and uses “Quasi-Experimental Research Design” to conduct research. The following research tools are useful: “Mechanical Drafting Proficiency Tests Scale (for Orthographic Projection),” “Spatial Abilit

APA, Harvard, Vancouver, ISO, and other styles

7

Caudill, Cindy. "Technical Illustration: The Changes and Challenges Presented by Advancements in Technology." Master's thesis, 2014. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/6072.

Full text

Abstract:

This thesis investigates the changes and challenges technology has created in the field of technical illustration. Technical illustration includes the fields of technical drawing as well as scientific and medical illustration. Previously, technical illustrators learned and used traditional illustration methods, without the aid of computers. However, technology has rapidly entered the field and has changed the education, work environment, skills, and role of the technical illustrator. I note both the benefits and disadvantages that current technical illustrators are facing in their work. I expl

APA, Harvard, Vancouver, ISO, and other styles

8

Zhuo, Ming-Yuan, and 卓明源. "A Study of Computer Aided Drafting Practice on Students’ Learning Motivation and Learning Effectiveness in Technical Senior High Schools- An Example of Taichung City." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/wtccpc.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>工業教育與技術學系<br>106<br>Abstract This study aimed to explore the Computer Aided Drafting Practice on students`s Learning Motivation and Learning Effectiveness in Technical Senior High Schools. The questionnaire survey method was adopted with the stratified random sampling. The sampling population included the seniors from the home mechanical engineering groups of the technical senior high schools in Taichung City in academic year 2016/2017. A total of 700 questionnaires were distributed to 5 schools, and 660 were retrieved. The invalid questionnaires were excluded. The number of

APA, Harvard, Vancouver, ISO, and other styles

9

Lin, Pei-Yuan, and 林佩緣. "A Study on Learning Achievement of Cooperative Technical-Art Education Programs of Junior High Students in Computer-Aided Mechanical Drafting through Cooperative Learning Method." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/jcq68k.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>工業教育與技術學系<br>107<br>This study aimed to explore a study on learning achievement of cooperative technical-art education programs of junior high students in computer assisted mechanical drawing through cooperative learning method. To achieve research purposes, unequal quasi-experimental study was adopted. The research tools used were mainly “Computer Assisted Mechanical Drawing” to compare the test results before and after the test. The Learning Attitude Scale was a supplement to explore students' learning of computer assisted mechanical drawing. The subjects of the experiment

APA, Harvard, Vancouver, ISO, and other styles

10

Skerlj, Alexandre. "Forme et dynamique sociale de l'entreprise réseau : monographie d'un atelier de dessin technique." Thèse, 2010. http://hdl.handle.net/1866/4943.

Full text

Abstract:

Le recours à la stratégie du recentrage sur le cœur de métier (core business) par les entreprises fait apparaître, en discours comme en pratique, trois mouvements qui déstabilisent les ensembles bureaucratiques: la réorganisation de la grande firme en « centres de profits », la multiplication des relations inter-firmes et un changement d’ordre qualitatif dans les termes de l’échange. L’avènement et le maintien de ce que nous convenons d’appeler l’« entreprise réseau » demeurent à ce jour problématique : soit cette forme organisationnelle serait le résultat d’une adaptation unilatérale à son en

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Technical drafting"

1

Maruggi, EdwardA. Technical graphics: Electronics worktext. Merrill, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jefferis, Alan. Architectural drafting & design. 2nd ed. Delmar Publishers, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Goetsch, David L. Technical drawing. Delmar Publishing Co., 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Goetsch, David L. Technical drawing. 3rd ed. Delmar Publishers, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jefferis, Alan. Architectural drafting and design. 3rd ed. Delmar, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rusty, Gesner, ed. Stepping into AutoCAD: A guide to technical drafting using AutoCAD. 4th ed. New Riders Pub., 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Goetsch, David L. Technical drawing: Fundamentals, CAD, design. 2nd ed. Delmar, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

W, Smith Douglas. Technical Drawing 101 with AutoCAD 2008. Prentice Hall, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Merickel, Mark. Stepping into CAD: A technical drafting workbook using the AutoCAD Microcomputer Program. New Riders Pub., 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

MIED, Phelps Neil IEng, ed. The essential guide to technical product specification: Engineering drawing. BSI, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Technical drafting"

1

Höfler, Stefan. "Legislative Drafting Guidelines: How Different Are They from Controlled Language Rules for Technical Writing?" In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-32612-7_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Peters, Marie. "Adapting Cities to Demographic Challenges of Ageing: A Review of the Political Landscape and Approaches in China and Germany." In Sustainable Aging. Springer Berlin Heidelberg, 2024. http://dx.doi.org/10.1007/978-3-662-69139-7_16.

Full text

Abstract:

AbstractThe rate of ageing is increasing among Germany and China’s populations. This trend is especially apparent in the countries’ urban centres, which face hurdles to adapt to this demographic shift. Whereas technical standards for primarily infrastructural adjustments are already in place or in development, their application as well as the social integration of the elderly remains an even greater challenge. Both countries have acknowledged this challenge and are restructuring their institutional landscape, adding new responsibilities, tasks and drafting political guiding documents. This art

APA, Harvard, Vancouver, ISO, and other styles

3

Aminaka, Akiyo. "Politics of Land Resource Management in Mozambique." In African Land Reform Under Economic Liberalisation. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4725-3_6.

Full text

Abstract:

AbstractMozambique's 1997 Land Law was praised by international donors and the country’s own civil society for its democratic and open drafting process. The process included public hearings throughout the country and the recognition of customary law. However, once it became operational, there were many instances of so-called land grabbing. This chapter argues that the reason for this lies in the political operation of the law rather than in the technicalities of its application. This chapter aims to explore the political dynamics in Mozambique that distort the implementation of the Land Law of

APA, Harvard, Vancouver, ISO, and other styles

4

Colella, Lucia Consuelo. "The Material Aspects, Palaeography, and Layout of Roman Wills from Egypt." In Edizioni dell’Istituto Papirologico «G. Vitelli». Firenze University Press, 2024. https://doi.org/10.36253/979-12-215-0456-9.09.

Full text

Abstract:

This chapter investigates the physical features, mise en page, and palaeography of Roman wills from Egypt before and after Severus Alexander (222–235 CE). Writing media (tablets and papyri) and language (Latin and Greek) are important in determining whether we are dealing with an original will, a copy, or a translation. Moreover, a closer analysis of their physical features, writing surface, number of hands, and layout strategies can yield a deeper understanding of the documents in their context. I argue that other wills on tablets had a similar format to that of C.Pap.Lat. 221 in the position

APA, Harvard, Vancouver, ISO, and other styles

5

LONI, Ar NILAMBARI, and Ar SANJAY PABARI. "DRAFTING TECHNIQUES." In HABITATS: HOLISTIC APPROACHES TO BUILDING, INTERIORS AND TECHNICAL SYSTEMS. NOBLE SCIENCE PRESS, 2024. http://dx.doi.org/10.52458/9788196897444.nsp2024.eb.ch-26.

Full text

Abstract:

The journey of any architectural drafting starts with the understanding of drafting techniques. Beginners need to understand the basic skill of drafting techniques to create a detailed drawing. This chapter introduces you to a range of techniques starting from preparation of surface for drafting to selecting the appropriate pen and pencils for the job. Learning these techniques helps in creating drawings that are ideal for execution and conveying the design concept. The designer and the clients communicate through the drawings. Accurate drawing is facilitated by the understanding of architectu

APA, Harvard, Vancouver, ISO, and other styles

6

"Planning, Drafting, and Editing Documents." In Technical Writing for Teams. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9780470602706.ch5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Burris, Scott, Micah L. Berman, Matthew Penn, and Tara Ramanathan Holiday. "How to Write a Law." In The New Public Health Law, 2nd ed. Oxford University PressNew York, 2023. http://dx.doi.org/10.1093/oso/9780197615973.003.0017.

Full text

Abstract:

Abstract This chapter defines the process of drafting a law, beginning with understanding the goal of the law; then moving through the steps of incorporating the existing science and law; capturing the goal, the rules of conduct, and the intervention in organized language and structure, which differs depending on whether the law is a regulation or a statute; and soliciting expert and stakeholder feedback. The chapter also covers technical drafting issues, such as legal definitions, cross-references, use of consistent terminology, and the use and placement of modifiers.

APA, Harvard, Vancouver, ISO, and other styles

8

Palmirani, Monica, Francesco Sovrano, Davide Liga, Salvatore Sapienza, and Fabio Vitali. "Hybrid AI Framework for Legal Analysis of the EU Legislation Corrigenda." In Frontiers in Artificial Intelligence and Applications. IOS Press, 2021. http://dx.doi.org/10.3233/faia210319.

Full text

Abstract:

This paper presents an AI use-case developed in the project “Study on legislation in the era of artificial intelligence and digitization” promoted by the EU Commission Directorate-General for Informatics. We propose a hybrid technical framework where AI techniques, Data Analytics, Semantic Web approaches and LegalXML modelisation produce benefits in legal drafting activity. This paper aims to classify the corrigenda of the EU legislation with the goal to detect some criteria that could prevent errors during the drafting or during the publication process. We use a pipeline of different techniqu

APA, Harvard, Vancouver, ISO, and other styles

9

"REFLECTED CEILING PLAN." In Drawing the Line: Technical Hand Drafting for Film and Television. Routledge, 2018. http://dx.doi.org/10.4324/9781315266282-10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

"LAYING OUT THE PAGE." In Drawing the Line: Technical Hand Drafting for Film and Television. Routledge, 2018. http://dx.doi.org/10.4324/9781315266282-11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Technical drafting"

1

Robertson, David, Karl T. Ulrich, and Marc Filerman. "CAD Systems and Cognitive Complexity: Beyond the Drafting Board Metaphor." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0033.

Full text

Abstract:

Abstract Computer-Aided Design (CAD) systems can and should support and enhance the product development process. Unfortunately, the benefits delivered by current systems have not met users’ expectations. We believe that CAD systems should be designed to minimize the cognitive complexity facing the engineer; CAD systems should be easy to use and should help the engineer manage design-related complexity. A series of propositions are developed which refine these ideas. To evaluate the central propositions, we constructed a prototype CAD system for the design of blanked and bent sheet metal parts.

APA, Harvard, Vancouver, ISO, and other styles

2

Sinha, Dipendra K., and Michael T. McDonald. "Automated Design of Optimum Belt Drives." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0082.

Full text

Abstract:

Abstract The paper describes a belt design package which works from within a commercial Computer Aided Design and Drafting package (AutoCAD) environment and utilizes FORTRAN programs for design and selection of lowest weight components for the drive system. The components used in the process are available as stock items in U.S.A. The relevant information on these products is stored in commercial database management systems such as EXCEL and LOTUS 1-2-3. Output from the package consists of scaled drawing and tabular specifications.

APA, Harvard, Vancouver, ISO, and other styles

3

Henson, Brian W. "A Team-Based Undergraduate Module in Embodiment Design." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dtm-8785.

Full text

Abstract:

Abstract This paper describes a new module in embodiment design that updates the teaching of engineering design at Level 2 in the School of Mechanical Engineering at the University of Leeds. The new module is team-based, uses a 3D solid modeling system and emphasizes the process over the product of the design process. The module replaces one in which students worked alone to produce a detailed drawing of a sub-assembly at a drafting board. The development and content of the module, and the congruency of the learning outcomes with the level objectives, are described. Problems associated with th

APA, Harvard, Vancouver, ISO, and other styles

4

Walter, Chipambwa, Chikwanya Evelyn V, and Chisosa Fadzai D. "ENHANCING PATTERN DRAFTING AND FASHION ILLUSTRATION USING CORELDRAW AND A GRAPHICS TABLET." In INTERNATIONAL SYMPOSIUM ON GRAPHIC ENGINEERING AND DESIGN. UNIVERSITY OF NOVI SAD FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN 21000 Novi Sad, Trg Dositeja Obradovića 6, 2024. http://dx.doi.org/10.24867/grid-2024-p68.

Full text

Abstract:

The purpose of this study was to develop techniques for computer-aided design (CAD) in fashion using CorelDraw a vector graphics software and a graphics tablet to produce technical fashion packs. The study adopted a design-based action research method to develop digital fashion illustrations and patterns. The study sought to solve the problem common among fashion designers of integrating CAD in their operations. Results revealed that designers can create complex digital fashion illustrations easily by using the graphics tablet and CorelDraw. The techniques explored in this study can assist fas

APA, Harvard, Vancouver, ISO, and other styles

5

Kameyama, Ken-ichi, Koichi Kondo, and Koichi Ohtomi. "An Intelligent Interactive Layout CAD System for Industrial Plants." In ASME 1990 Design Technical Conferences. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/detc1990-0105.

Full text

Abstract:

Abstract This paper describes an industrial plant layout system with an intelligent interactive user-interface. This system offers a powerful design environment, in which a designer can concurrently draw and check a layout plan, which can not be realized on a conventional plant layout CAD system. The major function of the system is the automatic constraint checking of each designer’s drafting action. This function is achieved by the integration of a geometric modeler, frame representation, and production rules. The geometric modeler is used for extracting the information for data updating and

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Liang, Yongxing Wang, Antonio M. Recuero, and Ahmed A. Shabana. "Use of ANCF Finite Elements in MBS Textile Applications." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46330.

Full text

Abstract:

The objective of this investigation is to present a new flexible multibody system (MBS) approach for modeling textile roll-drafting sets used in chemical textile industry. The proposed approach can be used in the analysis of textile materials which have un-common material properties best described by specialized continuum mechanics constitutive models, for instance, the lubricated polyester filament bundles (PFB) presented in this paper. In this investigation, PFB is modeled as a hyper-elastic transversely isotropic material using absolute nodal coordinate formulation (ANCF). The PFB strain en

APA, Harvard, Vancouver, ISO, and other styles

7

Nielsen, Eric H., John R. Dixon, and George E. Zinsmeister. "Capturing and Using Designer Intent in a Design-With-Features System." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0035.

Full text

Abstract:

Abstract The goal of “intelligent” computer-aided-design (CAD) systems is to provide greater support for the process of design, as distinguished from drafting and analysis. More supportive design systems should provide a quick and simple means of creating and modifying design configurations, automating evaluation procedures (e.g., for manufacturing), and automating interfaces to analysis procedures. In this paper we are concerned with the issues of representing in-progress designs so that such goals can be met. A feature-based representation is proposed in which features are defined as possess

APA, Harvard, Vancouver, ISO, and other styles

8

Zhong, Zhimin. "The Drafting and Discussion of Terminology of Aging and Life Management for Nuclear Power Plant in China." In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-90645.

Full text

Abstract:

Abstract From 2016, we started to draft the industry standard of “Terminology of aging and life management for nuclear power plant “(NB/T 200555-2019)”. After three years, it was issued in China and came into recommend implementation at July, 2020. As ageing management and life management activities are important part of periodic safety review or operating license renewal for nuclear power plants, the standardization of ageing management and life management terms and terminology will benefit the related practice, technical communication and international cooperation. This paper briefly introdu

APA, Harvard, Vancouver, ISO, and other styles

9

Straatsma, Michael, Anthony Barletta, and Alexandra Schonning. "Design of a Screw Test Fixture via Computer-Aided Engineering." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49837.

Full text

Abstract:

Biomet Microfixation is a biomedical engineering company specializing in craniomaxillofacial products. One of their main products is the manufacturing of screws. The current method of testing the pullout strength of the screws has been under investigation and it was determined that a new screw test fixture must be designed. The new method would exert an axial load to the screw adhered to a substrate. The design process for developing the fixture followed an iterative process including brainstorming, developing conceptual drawings, three dimensional computer-aided modeling, and computer-aided d

APA, Harvard, Vancouver, ISO, and other styles

10

Hotchkiss, Anthony. "The Development of a Profile-Milling Program for Teaching Computer-Aided-Manufacturing and CNC Programming." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/cie-4439.

Full text

Abstract:

Abstract At SUNY College at Buffalo, a new course, TEC302, CAD/CAM, computer-aided-design and computer-aided-manufacturing was added to the Industrial Technology (IT) undergraduate curriculum in the fall of 1994. At that time, the technology department had been using the AutoCAD system for design/drafting, and SmartCAM for demonstrating computer-aided-manufacturing. SmartCAM is a sophisticated product that takes a great deal of training to use, does not work directly in AutoCAD, and with only four licenses, was not available to all the students. For these reasons, the author developed a CAM pr

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Technical drafting"

1

Gruber, Peter. Better and Faster Academic Writing with LaTeX and ChatGPT. Instats Inc., 2025. https://doi.org/10.61700/3m4v9tp7g36bg1633.

Full text

Abstract:

This three-day seminar introduces technical and creative aspects of academic writing with LaTeX. Leveraging AI and LaTeX's clear structure, participants will develop an efficient publication workflow—from drafting and literature review to creating tables, figures, equations, revising, and presenting. Participants will learn to quickly produce high-quality academic documents, improve writing style, and avoid imprecise AI-generated jargon. Weekly meetings provide practical application and ongoing support.

APA, Harvard, Vancouver, ISO, and other styles

2

Gonzalez Diez, Verónica M. Ex Post Evaluation of Mitigation Measures in the Samalayuca II and Monterrey III Thermal Power Generation Projects. Inter-American Development Bank, 2011. http://dx.doi.org/10.18235/0010446.

Full text

Abstract:

This evaluation conducts an ex post review of the mitigation measures in the Samalayuca II and Monterrey III thermal power generation projects in Mexico. In general, it can be concluded that both thermoelectric power plants took into account most of the environmental impacts and mitigation measures recommended by the literature. A more active role in project design, supervision, and monitoring by the IDB would increase the technical value added. Social action plans need to be considered, as well as local community participation during project design and monitoring. Targeted studies to solve en

APA, Harvard, Vancouver, ISO, and other styles

3

Heitmüller, Frederik. Scenarios for Negotiating a UN Framework Convention on International Tax. Institute of Development Studies, 2025. https://doi.org/10.19088/ictd.2025.006.

Full text

Abstract:

Negotiations have started on a new United Nations (UN) Framework Convention on International Tax – a development that could shift the balance of power in international tax. This area has long been dominated by the Organisation for Economic Co-operation and Development (OECD) and G20 – the Convention could provide the UN with a more central role in shaping global tax policies. This process was set in motion in December 2022 by UN resolution 77/244, ‘Promotion of inclusive and effective international tax cooperation at the United Nations’. An Ad Hoc Committee was formed to develop the terms of r

APA, Harvard, Vancouver, ISO, and other styles

4

Lam, Terence, and Keith Gale. Construction frameworks in the public sector: Do they deliver what they promise? Property Research Trust, 2021. http://dx.doi.org/10.52915/sbuk7331.

Full text

Abstract:

We demonstrate that the use of Performance Frameworks for the procurement of construction projects by public sector organizations in the UK (specifically, in England) leads to significantly improved outcomes in terms of time, cost, quality, sustainability and closer relationships, than the traditional ‘open tender’ approach of procuring discrete projects, individually. We identify the factors that lead to such improvements. We label these: supplier’s task performance factors (project staff, execution approach, competence of firm and structure of firm); supplier’s contextual performance factors

APA, Harvard, Vancouver, ISO, and other styles

5

Ocampo-Gaviria, José Antonio, Roberto Steiner Sampedro, Mauricio Villamizar Villegas, et al. Report of the Board of Directors to the Congress of Colombia - March 2023. Banco de la República de Colombia, 2023. http://dx.doi.org/10.32468/inf-jun-dir-con-rep-eng.03-2023.

Full text

Abstract:

Banco de la República is celebrating its 100th anniversary in 2023. This is a very significant anniversary and one that provides an opportunity to highlight the contribution the Bank has made to the country’s development. Its track record as guarantor of monetary stability has established it as the one independent state institution that generates the greatest confidence among Colombians due to its transparency, management capabilities, and effective compliance with the central banking and cultural responsibilities entrusted to it by the Constitution and the Law. On a date as important as this,

APA, Harvard, Vancouver, ISO, and other styles

6

MRC Annual Report 2004. Mekong River Commission Secretariat, 2004. http://dx.doi.org/10.52107/mrc.ak2p8d.

Full text

Abstract:

The Report discusses progress towards developing the technical basis for and drafting of a procedure on the maintenance of flows on the Mekong mainstream, under the Water Utilisation Programme, and basin modelling tools.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!