Relevant bibliographies by topics / Technical means of production

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Technical means of production'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Technical means of production.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Technical means of production"

1

Gibson, Bill, and Hadi Esfahani. "Technical Change with Non-Produced Means of Production." Review of Radical Political Economics 18, no. 4 (1986): 100–101. http://dx.doi.org/10.1177/048661348601800406.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

A, Deryaev. "Review of the Technical and Economic Evaluation of the Use of Means of Simultaneous Independent Operation for Solving Technical Problems." Petroleum & Petrochemical Engineering Journal 8, no. 2 (2024): 1–7. http://dx.doi.org/10.23880/ppej-16000385.

Full text
Abstract:
In the context of developing multilayer deposits in Turkmenistan, the technical and economic evaluation of technique used in simultaneous and independent operation represents an important area of work. Most of the oil and gas fields both in our country and abroad are multi-layered. At the same time, several productive layers are located layer by layer one above the other. From the point of view of rational development, the development of such deposits by independent grids of wells drilled for each individual reservoir is the most preferable. However, the experience of oilfield development show
APA, Harvard, Vancouver, ISO, and other styles
3

Chuprinina, A. S., D. V. Paduchikh, and E. E. Volkhonskaya. "ACTIVE TECHNICAL MEANS OF INFORMATION PROTECTION USED IN AUTOMATED PRODUCTION." Международный студенческий научный вестник (International Student Scientific Herald), no. 6 2022 (2022): 59. http://dx.doi.org/10.17513/msnv.21029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kotsyruba, V., and V. Dachkovsky. "METHODOLOGY OF JUSTIFICATION OF TACTICAL AND TECHNICAL REQUIREMENTS FOR TECHNICAL INTELLIGENCE MEANS." Collection of scientific works of Odesa Military Academy, no. 17 (August 31, 2022): 37–47. http://dx.doi.org/10.37129/2313-7509.2022.17.37-47.

Full text
Abstract:
On the basis of the analysis of logistics functions, the measures that are its technical component are separated. It has been established that technical intelligence is one of the most important measures for the restoration of malfunctioning (damaged) samples of weapons and military equipment. The set of tasks that are solved during the conduct of technical intelligence is disclosed and problematic issues in the practice of restoring weapons and military equipment are formulated. The analysis of the latest research and publications allowed us to come to the conclusion that the problematic issu
APA, Harvard, Vancouver, ISO, and other styles
5

Kuzmenko, V. F., V. V. Maximenko, and O. V. Kholodiuk. "Development of means of mechanization of fodder production." Mehanization and electrification of agricultural, no. 12 (2020): 91–101. http://dx.doi.org/10.37204/0131-2189-2020-12-11.

Full text
Abstract:
Annotation Purpose.Establishing the main directions of development of technical means for the preparation of feed for the current state of development of technology in Ukraine and the world. Methods.Monographic, analytical, systematic analysis of the transformation of technical objects and technological processes of harvesting and storage of stem feeds and prospects for their development. Results. Prospects for the development of dairy farming in Ukraine are identified, the main machines for stem fodder harvesting are identified, the characteristics of domestic and foreign production machines
APA, Harvard, Vancouver, ISO, and other styles
6

Kholodyuk, Oleksandr, Volodymyr Kuzmenko, and Volodymyr Zhukov. "PREPARATION FEATURES OF TECHNICAL MEANS FOR HAYMAKING." ENGINEERING, ENERGY, TRANSPORT AIC, no. 1(116) (April 29, 2022): 32–40. http://dx.doi.org/10.37128/2520-6168-2022-1-4.

Full text
Abstract:
Increasing production of livestock products requires a radical improvement of fodder production on farms and, above all, the procurement of stem fodder as such, ensuring the completeness of cattle feeding. Modern technologies and technical means of forage harvesting allow to perform high-quality work in agro-technical terms. It is noted that haymaking, as well as other fodder, provides a systematic, comprehensive approach to the organization of work, staffing a set of technical means, their preparation for work, the collection and subsequent storage of feed. The purpose of the research is to s
APA, Harvard, Vancouver, ISO, and other styles
7

Izmaylov, A. Yu. "Smart technologies and robotic means in agricultural production." Вестник Российской академии наук 89, no. 5 (2019): 536–38. http://dx.doi.org/10.31857/s0869-5873895536-538.

Full text
Abstract:
A necessary condition for a sharp increase in production is the introduction of digital smart technologies. With the use of digital technologies, it is possible to achieve a significant increase in labor productivity and crop yields, reduce energy and material costs. Digital machine technologies should be used in crop production, animal husbandry, power engineering, storage and processing of agricultural products. The effective production development requires a comprehensive system of management of agricultural enterprises, which, based on the obtained data, will ensure timely and correct proc
APA, Harvard, Vancouver, ISO, and other styles
8

ЩЕКОЛДИН, В. А., И. В. БОГАТЫРЕВА, and Л. А. ИЛЮХИНА. "DEVELOPMENT OF TIME STANDARDS USING MODERN TECHNICAL MEANS." Экономика и предпринимательство, no. 2(151) (May 31, 2023): 1218–20. http://dx.doi.org/10.34925/eip.2023.151.2.242.

Full text
Abstract:
В статье рассматриваются вопросы применения современных технических средств для изучения трудовых процессов. На примере прокатного производства показана методика проведения исследования процесса прокатки алюминиевых сплавов с помощью осциллографирования с целью разработки нормативов времени. The article deals with the application of modern technical means for the study of labor processes. On the example of rolling production, the methodology of conducting a study of the process of rolling aluminum alloys using oscillography in order to develop time standards is shown.
APA, Harvard, Vancouver, ISO, and other styles
9

VODYANNIKOV, VLADIMIR T. "TRENDS IN THE IMPROVEMENT OF TECHINICAL MEANS AND THE REPLACEABILITY OF TECHNOLOGICAL MODES OF PRODUCTION." Agricultural engineering, no. 2 (2022): 76–80. http://dx.doi.org/10.26897/2687-1149-2022-2-76-80.

Full text
Abstract:
The development of technical means of production contributes to the improvement of technological modes of the economy. To establish trends of updating technical means and form technological modes of the country’s economy, and their interrelation and interdependence, the author has identified and characterized key periods of formation and development of technology, identified key factors of formation and improvement of the technological modes of production, and advanced technical and technological development trends of modern production. It has been established that the acceleration of scientif
APA, Harvard, Vancouver, ISO, and other styles
10

VODYANNIKOV, VLADIMIR T. "TRENDS IN THE IMPROVEMENT OF TECHINICAL MEANS AND THE REPLACEABILITY OF TECHNOLOGICAL MODES OF PRODUCTION." Agricultural engineering, no. 2 (2022): 76–80. http://dx.doi.org/10.26897/2687-1149-2022-2-76-80.

Full text
Abstract:
The development of technical means of production contributes to the improvement of technological modes of the economy. To establish trends of updating technical means and form technological modes of the country’s economy, and their interrelation and interdependence, the author has identified and characterized key periods of formation and development of technology, identified key factors of formation and improvement of the technological modes of production, and advanced technical and technological development trends of modern production. It has been established that the acceleration of scientif
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Technical means of production"

1

Рясна, О. В. "Сучасні методи автоматизованих систем управління технологічними процесами". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66639.

Full text
Abstract:
Автоматизована система управління технологічними процесами представляє собою замкнуту систему, що забезпечує автоматизований збір і обробку інформації, необхідної для оптимізації управління технологічним об'єктом в відповідності з прийнятим критерієм, і реалізацію керуючих впливів на технологічний об'єкт. Технологічний об'єкт керування — це сукупність технологічного обладнання і реалізованого на ньому (за відповідними алгоритмами і регламентами) технологічного процесу. В залежності від рівня технологічним об'єктом управління можуть бути технологічні агрегати і установки, групи верстаті
APA, Harvard, Vancouver, ISO, and other styles
2

Green, David Robert. "M-Net decoder production : a technical analysis." Thesis, Cape Technikon, 1989. http://hdl.handle.net/20.500.11838/1130.

Full text
Abstract:
Thesis (Masters Diploma (Technology))--Cape Technikon, Cape Town, 1989<br>The document initially describes the operation of the decoder and the production system. Thereafter actual engineering problems are stated and their solutions discussed. The project involves the accurate identification of problem areas on the production line and the systematic solving for each case. Subjects include static electricity pretesting and automatic insertion machine defects. Analysis of these problems provides one with a better perspective towards the production line and its inherent problems.
APA, Harvard, Vancouver, ISO, and other styles
3

Hudson, Barry, and not given. "The Production of Power by Pure Rotary Means." RMIT University. Architecture and Design, 2008. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20090213.150107.

Full text
Abstract:
The chapters subsequent to the design discussion describe the evolution of the project. During the progression of the project, four case studies were undertaken. Each of these case studies involved the design of an engine, using the principles expounded in the early chapters. The parts of three of these were manufactured. The project has culminated in case study four which consisted of the conception, design and component manufacture of a new type of engine: the Hudson 5 Cycle Rotary Engine. It does not reciprocate, nor is it orbital (Sarich) and is not peritrocoidal (Mazda). It op
APA, Harvard, Vancouver, ISO, and other styles
4

Heyd, Miriam. "Continuous production of rhamnolipids by means of process integration." [S.l. : s.n.], 2009. http://digbib.ubka.uni-karlsruhe.de/volltexte/1000010438.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Meanwell, Jennifer L. (Jennifer Lauren). "Technical choice in pottery production : a west Mexican example." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/114091.

Full text
Abstract:
Thesis: S.B. in Archaeology and Materials, Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2001.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 69).<br>This thesis identifies the pottery engineering techniques of ancient Mexican potters from the site of La Queseria in the Balsas depression of Guerrero. I used data from petrography, geologic maps, clays from the area, x-ray diffraction and mechanical testing to determine whether these potters were using different clays for different functional designs. I determined t
APA, Harvard, Vancouver, ISO, and other styles
6

Gómez, Morales Yuri Jack. "The scientific production : the socio-technical construction of bibliometric measurement." Thesis, University of York, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.428470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Walisinghe, Buddhini Ranjika. "Technology and Technical Efficiency in Rice Production in Sri Lanka." Thesis, Griffith University, 2017. http://hdl.handle.net/10072/366971.

Full text
Abstract:
Technological innovation resulting from Research and Development (R&D) investments plays a key role in productivity growth in agricultural-based developing economies. Innovations and technologies discovered at research units diffuse to users in a systematic manner and the success of this process is confirmed when target beneficiaries adopt the technology for its intended use. To realize the expected productivity growth generated from technological innovations, it is important to understand efficiency gains and adoption patterns of technologies. The main objective of this thesis is to analyse g
APA, Harvard, Vancouver, ISO, and other styles
8

Deraniyagala, Sonali. "Technical change and efficiency in Sri Lanka's manufacturing sector." Thesis, University of Oxford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.307408.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

PISONI, ALBERTO. "Investigating the neural correlates of language production by means of TDCS." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2014. http://hdl.handle.net/10281/52583.

Full text
Abstract:
Language production is one of the most complex cognitive – motor skills developed by homo sapiens throughout evolution to allow inter-personal and intra-personal communication (Indefrey and Levelt, 2000). A great number of cortical regions have adapted to support this high-speed combination of muscular and mental processes, in order to correctly generate the intended utterances in different contexts and situations. The neural organization of language processing is a thorny matter, that in the last decades has been investigated with a number of different methods ranging from functional imaging
APA, Harvard, Vancouver, ISO, and other styles
10

Cristoiu, Adriana. "Technical efficiency in transition economies : the case of Romanian crop production." Thesis, Imperial College London, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.406336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Technical means of production"

1

Gagarina, Larisa, and Filipp Zolotuhin. Technical means of informatization. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1083293.

Full text
Abstract:
The systematization of the main structural elements of computers and computer equipment is given, the principles of their operation and the features of their functioning are described. The methods of modernization and debugging are considered. The issues of compatibility, configuration and rational use of equipment are analyzed.&#x0D; Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation.&#x0D; For students, postgraduates, researchers, teachers of higher and secondary vocational educational institutions, as well as for ever
APA, Harvard, Vancouver, ISO, and other styles
2

Gorovoy, Viktor, and Elena Gorovaya. Special equipment of law enforcement agencies. INFRA-M Academic Publishing LLC., 2023. http://dx.doi.org/10.12737/1932274.

Full text
Abstract:
The textbook prepared for the study of the discipline "Special equipment of law enforcement agencies" discusses special equipment and special means used by law enforcement agencies of the Russian Federation. The tactical and technical characteristics of modern means of individual armor protection, special means of non-lethal action, search technical means, security and surveillance means are presented, as well as the main directions of technical equipment and the use of special chemicals in operational search activities are highlighted.&#x0D; Meets the requirements of the federal state educati
APA, Harvard, Vancouver, ISO, and other styles
3

Klyuev, Mikhail, Anatoly Schreider, and Igor Rakitin. Technical Means for Underwater Archaeology. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-27502-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chanvre, Confederation Internationale du Lin et du. Linen: Technical aspects of production. 2nd ed. Confederation Europeene du Lin et du Chanvre, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Morroni, Mario. Production process and technical change. Cambridge University Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Grafkina, Marina. Labor protection. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1173489.

Full text
Abstract:
The textbook contains information on the legal, regulatory, organizational, and technical bases of labor protection; on the identification of dangerous and harmful factors; and on the impact of various negative factors on human health. Methods and means of protecting a person from the effects of harmful and dangerous industrial factors are disclosed. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation, approximate educational programs (in terms of the discipline "Labor Protection") in the specialties 15.02.15 "Technology
APA, Harvard, Vancouver, ISO, and other styles
7

Ábrahám, Mariann. Liszt technical studies: Seeking ways and means. M. Ábrahám, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Whalley, Peter. The Social Production of Technical Work. Palgrave Macmillan UK, 1986. http://dx.doi.org/10.1007/978-1-349-07469-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sonaiya, Emmanuel Babafunso. Small-scale poultry production: Technical guide. Food and Agriculture Organization of the United Nations, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sonaiya, Emmanuel Babafunso. Small-scale poultry production: Technical guide. Food and Agriculture Organization of the United Nations, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Technical means of production"

1

Bächler, Liane, and Hauke Behrendt. "Participation in Work of People with Disabilities by Means of Technical Assistance." In New Digital Work. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-26490-0_7.

Full text
Abstract:
AbstractThe comprehensive realization of social participation for all individuals is a particular challenge in which the working world proves to be an important sphere. Despite normative reference points through socio-political innovations, people with intellectual disabilities and a high need for support are particularly excluded. Even in sheltered workshops, this group of people is excluded from participating in work as the challenges of life and labor in the 21st century are becoming ever more complex and the demands of production and business stricter. As a result, people with intellectual
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Jianwen, Lei He, Zhangming Wang, et al. "Research on 3D Laser Scanning for Enhancing Production Quality Control of Concrete Prefabricated Beams." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_33.

Full text
Abstract:
AbstractBased on the Hangzhou-Ningbo Expressway project, with the aim of addressing the drawbacks pertaining to challenging quality control, lengthy production duration, and low cost-effectiveness in the process of manufacturing concrete precast beams, this study employs three-dimensional laser scanning technology as a means of data acquisition in monitoring the quality of concrete precast beam spacing, size, and flatness within precast beam yards. By means of statistical analysis on the collected deviation data, various deviations in key indices of prefabricated components are identified, and
APA, Harvard, Vancouver, ISO, and other styles
3

Xia, Luohui, Bin Wu, Linwei Zhou, Tao Liang, and Zicong Liu. "Scheduling of Renewable Energy Hydrogen Production System Based on Two—Stage Distribution Robust Optimization." In Proceedings of the 10th Hydrogen Technology Convention, Volume 1. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8631-6_25.

Full text
Abstract:
AbstractHydrogen energy has various advantages such as cleanliness, storage and high energy carrier, which is considered to be one of the key paths to achieve the goal of “double carbon”. Utilization of hydrogen production in renewable energy is an important technical means to achieve new energy amazing and energy cleaning utilization. In response to the uncertainty characteristics of local scenery resources and local electricity load and hydrogen load demand, considering the investment cost of hydrogen storage system and the influence of flexible load of electric load on the optimal operation
APA, Harvard, Vancouver, ISO, and other styles
4

Netz, Johan, Pritam Padhi, Peter Magnusson, JanErik Odhe, Mattias Skrinning, and Åsa Windfäll. "Configure to Conquer: Implementing Configurators to Improve Competitiveness." In Future of Business and Finance. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-76560-5_6.

Full text
Abstract:
Abstract Recent advancements in technology have created new possibilities for customizing product design without significantly changing the costs of production. By using so-called configurators, which are a form of platform-based technology, firms now have the means to customize products more efficiently. Previous research has mainly focused on the technical side of configurators, whereas the business and organizational issues involved during their introduction are much less understood. The purpose of this chapter is to explore the challenges of adopting configurators in an organization. We co
APA, Harvard, Vancouver, ISO, and other styles
5

Leonelli, Sabina, and Hugh F. Williamson. "Introduction: Towards Responsible Plant Data Linkage." In Towards Responsible Plant Data Linkage: Data Challenges for Agricultural Research and Development. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-13276-6_1.

Full text
Abstract:
AbstractThis chapter provides a framing for this volume by reviewing the significance and the organisational, technical and social opportunities and challenges related to plant data linkage. We review what “responsible practice” means in relation to the plant environments being documented, the infrastructures used to circulate data, the institutions involved in data governance and the communities involved in plant data work. We show how, across these domains, responsible plant data linkage involves consideration of technical, legal, ethical and conceptual dimensions, thereby: (1) creating and
APA, Harvard, Vancouver, ISO, and other styles
6

Niewiadomski, Przemysław, and Agnieszka Stachowiak. "Meta-concepts in the Sustainable Production of Parts and Technical Subassemblies of Agricultural Means of Transport - An Attempt to Specify the Level of Implementation." In Road Traffic Analysis, Theoretical Approaches and Practical Solutions. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-51449-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Scribner, Richard A., Theodore J. Ralston, and William D. Metz. "National Technical Means." In The Verification Challenge. Birkhäuser Boston, 1985. http://dx.doi.org/10.1007/978-1-4899-6678-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mangold, Simon, Malte Mehner, Moritz Ströhle, Sebastian Kist, Florian Kößler, and Jürgen Fleischer. "Automated Production of Mycelium-Based Composite Products Using the Fibre Injection Moulding Process." In Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Fachmedien Wiesbaden, 2024. https://doi.org/10.1007/978-3-658-45889-8_4.

Full text
Abstract:
AbstractThe production of plastics has increased exponentially in the past two decades, with packaging making up a large portion of usage. Environmental concerns have surged due to the disposal of plastic waste, with only a small percentage being recycled while the rest is either burned or ending up in landfills. As a result, there is a growing need for alternatives, including biodegradable materials like mycelium, the structural part of fungi. While mycelium holds promise for technical applications, the manufacturing process is mainly manual, which hampers efficiency and scaling to large scal
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Junyi, Hongbiao Chen, Siqi Wang, and Na Liu. "Structural Design and Kinematic Analysis of a Three-Servo-Wheel Omnidirectional Mobile Platform." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_1.

Full text
Abstract:
Abstract In response to the current situation that traditional drive units in robotics competition are weak in the face of increasing technical requirements of the competition, we propose a solution to build a mobile robot based on a three-servo-wheel omnidirectional mobile platform. The mechanical mechanism and control algorithm of the solution are optimized, and the feasibility of the design is verified by motion simulation, and the physical prototype is developed and tested with excellent performance based on the simulation results. The kinematic analysis of the robot's omnidirectional move
APA, Harvard, Vancouver, ISO, and other styles
10

Quintili, Paolo. "Arti, tecniche e mestieri in Diderot e nell’Encyclopédie." In Idee di lavoro e di ozio per la nostra civiltà. Firenze University Press, 2024. http://dx.doi.org/10.36253/979-12-215-0319-7.65.

Full text
Abstract:
The Encyclopédie, ou Dictionnaire raisonné des sciences, des arts et des métiers (1751-1772) is the laboratory of experience of the new technical-rational values produced by the 18th century and the philosophie. Science and the mechanical 'arts', labor, invention, industry and trade; and, following on from these, freedom of conscience, tolerance, dialogue etc., in their controversial relations, give a representation of the conflicts of the newly-born bourgeois society. Exponents of the 'enlightened', learned and anticlerical nobility (Jaucourt, d'Holbach, Hélvetius); of the intellectual petty
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Technical means of production"

1

Rančić, Milorad. "Technical means and systems for irrigation in agricultural production." In Entrepreneurship, engineering and management: Climate change as an engineering challenge, Zrenjanin, 26.04.2025. Visoka tehnička škola strukovnih studija, Zrenjanin, 2024. https://doi.org/10.5937/pim25171r.

Full text
Abstract:
One of the negative phenomena that occurs due to climate change on our planet is long-term dry periods in areas where there were none before. In order to eliminate the consequences as well as the need to improve the physical properties of the soil on which agricultural crops are grown, it is necessary to implement irrigation. This paper specifies the technical means, methods and systems used in irrigation in the production processes of agricultural crops. From the classic means and systems, channel and irrigation systems, pumps, drip systems, typhoons, rain ramps and rain wings are selected an
APA, Harvard, Vancouver, ISO, and other styles
2

Kubeisinova, Assol, Massimo Viti, Enzo Pitoni, et al. "Oil-Based Stimulation Fluid as Means of Production Acceleration." In SPE Annual Caspian Technical Conference and Exhibition. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/189030-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kubeisinova, Assol, Massimo Viti, Enzo Pitoni, et al. "Oil-Based Stimulation Fluid as Means of Production Acceleration (Russian)." In SPE Annual Caspian Technical Conference and Exhibition. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/189030-ru.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lyshov, Sergey M., Ilya A. Ivanov, Saygid U. Uvaysov, and Viktoriya V. Chernoverskaya. "Vibration Control of Electronic Means Technical Condition Based on Analysis of Resonant Frequencies." In 2019 International Seminar on Electron Devices Design and Production (SED). IEEE, 2019. http://dx.doi.org/10.1109/sed.2019.8798407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ursini, Fabrizio, Simone Andrea Frau, Francesco D'Addato, et al. "Closed Looped Production Rate Evaluation by Means of Virtual Metering and Pressure Transient Analysis." In SPE Annual Technical Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/206295-ms.

Full text
Abstract:
Abstract The Integration of real-time high frequency data in well models allows to infer useful information regarding well and field performance. Virtual Metering (VM) algorithms aim at providing real time well rates solving an inverse problem based on flow equation in the wellbore. Although VM methodologies are based on Pressure/Temperature measurements, they rely on availability of calibration measurements. Pressure Transient Analysis (PTA) can provide useful insight for VM calibration. An innovative closed-loop workflow combining VM and PTA has been developed to face unreliable or absent ra
APA, Harvard, Vancouver, ISO, and other styles
6

Khisamutdinova, D., and A. Tyurin. "ASSESSMENT OF OCCUPATIONAL RISKS AND STRATEGIES FOR THEIR REDUCTION AT THE STYRENE PRODUCTION SITE." In TECHNOSPHERE SAFETY: MODERN SCIENTIFIC TRENDS, TECHNICAL AND ORGANIZATIONAL MEANS AND METHODS OF PROVISION, SPECIAL EDUCATION. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2024. https://doi.org/10.58168/technosphere2024_131-139.

Full text
Abstract:
The article assesses occupational risks in the workplace of a polymerization operator working at a styrene production site using a matrix method based on a point system. Labor functions and basic technological processes at this workplace are described. The advantages of the matrix method are named. In the course of the work, the features of compiling a risk classification matrix and risk calculation were studied. An assessment of risk levels has been carried out and basic management measures have been proposed. It is expected that as a result of the implementation of the proposed measures, the
APA, Harvard, Vancouver, ISO, and other styles
7

Shcherbinin, E. "CURRENT ISSUES OF THE USE OF NEW TECHNOLOGIES IN THE FIELD OF PRODUCTION SAFETY." In TECHNOSPHERE SAFETY: MODERN SCIENTIFIC TRENDS, TECHNICAL AND ORGANIZATIONAL MEANS AND METHODS OF PROVISION, SPECIAL EDUCATION. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2024. https://doi.org/10.58168/technosphere2024_301-305.

Full text
Abstract:
This article analyzes the progress of application of new technologies in the field of industrial safety. The main goals of introducing digitalized tools at enterprises in the field of safe production are given. A number of technologies used today in manufacturing industries are presented, with the main characteristics of their pros and cons. Enterprises that use special content need to pay special attention to security, taking into account the human factor.
APA, Harvard, Vancouver, ISO, and other styles
8

Alt, V. V., E. A. Balushkina, and S. P. Isakova. "MODERN APPROACHES TO THE TASK OF CHOICE OF TECHNOLOGIES AND TECHNICAL IN CROP PRODUCTION." In STATE AND DEVELOPMENT PROSPECTS OF AGRIBUSINESS. DSTU-PRINT, 2020. http://dx.doi.org/10.23947/interagro.2020.1.38-41.

Full text
Abstract:
The scheme of selection of technologies and technical means taking into account the influence of various factors is presented. The results of the analysis of information systems for the choice of technologies and technical means are given. The relevance of applying modern approaches to the selection of crop production technologies and the composition of the machine and tractor fleet, taking into account the agro-climatic, phytosanitary factors of the environment and production conditions of the economy, is shown.
APA, Harvard, Vancouver, ISO, and other styles
9

Russo, Matteo, Andrea Carlucci, Matteo Dellacasagrande, et al. "Optimization of Low-Pressure Turbine Blade by Means of Fine Inspection of Loss Production Mechanisms." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-128710.

Full text
Abstract:
Abstract In the present work, Proper Orthogonal Decomposition (POD) has been applied to Large Eddy Simulations (LES) of two high-loaded low-pressure turbine cascade operating under unsteady inflow for the detailed investigation of the entropy production in the different part of the blade passage. To this end, the Turbulent Kinetic Energy (TKE) production, diffusion and dissipation terms appearing into the stagnation pressure transport equation have been integrated all over the computational domain. The POD-based procedure allows splitting the contribution due to different coherent flow dynamic
APA, Harvard, Vancouver, ISO, and other styles
10

Hryshchenko, Maryna, and Svitlana Starovoitova. "Environmental friendliness of the production of glycosaminoglycans by biotechnological means." In VI International Conference on European Dimensions of Sustainablе Development. National University of Food Technologies, 2024. https://doi.org/10.24263/edsd-2024-6-39.

Full text
Abstract:
Glycosaminoglycans (GAGs) are an important biomolecule with wide applications in pharmaceuticals, cosmetics, and medicine. Traditionally obtained through extraction from animal tissues, this method poses contamination risks and quality control issues. Microbial engineering, or chemical synthesis, emerges as a promising eco-friendly, controlled, and cost-effective alternative for producing GAG. Animal tissue extraction has significant environmental drawbacks due to high energy and water consumption, as well as toxic waste emissions during raw material processing. It also risks transmitting zoon
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Technical means of production"

1

Papushin, E. A., and S. N. Mateichik. Database development for conversion and accumulation of monitoring data of technical means in crop production. Санкт-Петербургское региональное отделение Международной общественной организации"Международная академия аграрного образования", 2018. http://dx.doi.org/10.18411/0131-5226-2018-11996.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kuramoto, Juana R. Innovation, R&D and Productivity: Case Studies from Peru. Inter-American Development Bank, 2011. http://dx.doi.org/10.18235/0011209.

Full text
Abstract:
This paper analyzes quantitative findings on the innovative behavior of firms in the production chains of pisco and shoe manufacture in Peru, which are served by the network of Technological Innovation Centers (CITEs), the most important technology policy instrument available in Peru. These two chains, in low and medium-technology industries, are representative of Peru's manufacturing sector. Of particular interest is the role of technical standards as a means of technological diffusion, which is stressed in the work of the CITEs. For the pisco chain, that role involves the definition of the p
APA, Harvard, Vancouver, ISO, and other styles
3

Mares, David R. The New Energy Landscape: Shale Gas in Latin America. Inter-American Development Bank, 2012. http://dx.doi.org/10.18235/0006947.

Full text
Abstract:
This paper examines the potential for shale gas in Latin America, and the technical and institutional obstacles to the industry's development. The first part of the paper analyzes the characteristics of the shale gas revolution that developed in the U.S. and highlights its precarious nature, the requirements for its initial development, and future prospects. The second part turns to the Latin American context - with a focus on Argentina and México - drawing on the lessons from the U.S. experience to postulate where the significant obstacles to shale gas production in the region lie, why succes
APA, Harvard, Vancouver, ISO, and other styles
4

Deryabin, I. V. Noise-absorbing panel with bypass channels. FORGING AND STAMPING PRODUCTION. MATERIAL WORKING BY PRESSURE, 2023. http://dx.doi.org/10.12731/kshpomd62023-deryabin.

Full text
Abstract:
Noise, having a harmful effect on humans and the environment, forces us to search and conduct research on the development of new methods and means of noise protection. Currently, with an increasing increase in the flow of vehicles in residential areas, with the development of industrial production, the issue of noise control is becoming particularly relevant. A well-known and effective technical solution for blocking the transmission of acoustic energy is the use of noise-absorbing panels, both as part of various soundproof structures, and in the form of separate acoustic elements installed in
APA, Harvard, Vancouver, ISO, and other styles
5

Tarabukina, N. P., A. M. Stepanova, S. I. Parnikova, and S. V. Dulova. Production testing of sanitary means for processing udder cows. СФНЦА РАН, 2018. http://dx.doi.org/10.18411/978-5-6041597-2018-207-208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Author, Not Given. Hydrogen Production Technical Team Roadmap. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1220219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ali T-Raissi. Technical Analysis of Hydrogen Production. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/838430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Startech Engineering Department. Startech Hydrogen Production Final Technical Report. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/939264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bogatu, Dragos-Ioan, Emmanuel Bozonnet, Hilde Breesch, et al. International Energy Agency - Resilient Cooling of Buildings - Technology Profiles Report (Annex 80). Edited by Peter Holzer, Philipp Stern, and Patryk Czarnecki. Institute of Building Research & Innovation, 2024. http://dx.doi.org/10.52776/hftr4661.

Full text
Abstract:
The world is facing a rapid increase of air conditioning of buildings. It is the motivation of Annex 80 to develop, assess and communicate solutions of resilient cooling and overheating protection. Resilient Cooling is used to denote low energy and low carbon cooling solutions that strengthen the ability of individuals and our community to withstand, and prevent, thermal and other impacts of changes in global and local climates. This report offers a collection of 16 technologies, well suited to form a part of Resilient Cooling solutions of Buildings. It is meant as a package of information for
APA, Harvard, Vancouver, ISO, and other styles
10

SOLOVEVA, N., and V. TARAKANOVA. TECHNOLOGICAL APPROACHES TO TRAINING IN HIGHER EDUCATION INSTITUTION. Science and Innovation Center Publishing House, 2021. http://dx.doi.org/10.12731/2658-4034-2021-12-4-2-27-39.

Full text
Abstract:
The article discusses technological approaches to training in Higher Education Institution. The essence of technological approach to training consists in the transformation of educational processes into process with the guaranteed result. It supplements scientific approaches of pedagogy, psychology, sociology and other directions of science and practice. Purpose. To reveal how technological approaches to training in higher education institution influence on knowledge got by students. Scientific novelty. The article reveals development of the personality, creative abilities and it is necessary
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Technical means of production' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography