Log in

Relevant bibliographies by topics / Technical specification / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Technical specification.

Dissertations / Theses on the topic 'Technical specification'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Technical specification.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Ghobashy, Dina M. "Web-enabled COTS-supported alternative to interactive electronic technical manual database (IETMDB) specification." Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1472.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2000.<br>Title from document title page. Document formatted into pages; contains ix, 133 p. : ill. Vita. Includes abstract. Includes bibliographical references (p. 116-117).

APA, Harvard, Vancouver, ISO, and other styles

2

Egnell, Karl. "Standardized Technical Building Requirement." Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129579.

Full text

Abstract:

Denna rapport behandlar tekniska beskrivningar. Främst med fokus på problematiken för att skapa dessa på national men även global nivå samt utvecklingspotentialen med att standardisera dessa. Rapporten inriktar sig på stora industriella aktörer med en repetitiv hantering av byggprojekt för att på minsta möjliga sätt hindra sin kärnverksamhet men även underlätta utveckling och utökning av sin produktion. Rapporten tar upp fördelar men även potentiella nackdelar med ett standardiserat förfarande, därigenom vad företag måste tänka på och säkerställa för att få en fungerande och utvecklande proces

APA, Harvard, Vancouver, ISO, and other styles

3

Vidrnová, Kateřina. "Analýza systému managementu kvality a příprava organizace Parker Hannifin s.r.o. na certifikaci podle ISO/TS 16949." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-113224.

Full text

Abstract:

The aim of the thesis entitled "Analysis of the quality management system and preparing the organization Parker Hannifin, Ltd. for certification according to ISO/TS 16949 " is an analysis of the current state of quality management system in an organization Parker Hannifin Ltd. in readiness for certification according to technical specification ISO/TS 16949. This thesis consists of two parts. The theoretical part is a comparison of ISO 9001, which already is in an organization, and ISO/TS 16949 the organization wants to implement. The practical part is focused on analyzing the current state of

APA, Harvard, Vancouver, ISO, and other styles

4

Brennan, Andrew John. "Measures of environmental and sustainable socioeconomic welfare and the political economy of capitalism - theoretical reconstruction, technical specification, and critical analysis: GDP, ISEW and GPI." Thesis, Curtin University, 2009. http://hdl.handle.net/20.500.11937/114.

Full text

Abstract:

This study undertakes a critical analysis of measures of environmental and sustainable socioeconomic welfare from the perspective of political economy. One of the prime motivations for such an inquiry is that Gross Domestic Product (GDP) provides an inadequate measure of social and ecological waste in the economic system. Good measures with solid theory (or theories) can offer vital insights where there may be conflict between the various spheres of economy, society and ecology. The inquiry centres on measures that may be referred to as 'Net Income Indices' or Sustainable Economic Welfare Indi

APA, Harvard, Vancouver, ISO, and other styles

5

Doležel, Jakub. "Stavebně technologická příprava výstavby bytového domu v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265578.

Full text

Abstract:

This thesis focuses on developing technological preparation of the apartment house Kociánka in Brno. This work includes technical report, coordination situation transport routes, feasibility studies, time and financial plan object, building equipment, design of construction machines and equipment, schedule od work, technological prescription, itemized budget, inspection and test plan and dedicated the award to the assessment of traffic and the project of the traffic - engineering measures.

APA, Harvard, Vancouver, ISO, and other styles

6

Sjöberg, Felix, and Jacob Johansson. "Utredning av förfrågningsunderlag gällande byggandet av trästomme med fokus på offentlig upphandling." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-29587.

Full text

Abstract:

In the mid 1990s a previous prohibitions against multi-story buildings higher than two floors with a wooden frame was changed. Today multi-storey buildings are being built in Skellefteå, Sundsvall, Växjö, and Stockholm with others. Despite this only one of five houses being built today has a wooden frame. Since the municipality is a key force to get projects with wooden frames, this papers purpose is to improve tender document for the opportunity to submit bids and building with wooden frames. To help us forward with our work three questions were formulated. 1) What is the basis from a wooden

APA, Harvard, Vancouver, ISO, and other styles

7

Fišer, Jiří. "Kulturní dům Brno - venkov, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265356.

Full text

Abstract:

The subject of the master´s is the construction and technological preparation of a house of culture reconstruction. For the construction project it is made a technical report, a estate road layout, a preliminary design of technological implementation, a site equipment, a time and financial schedule, a design of the main building machines and mechanism, technological specifications and test plan. The other topic is a contract of work, a project budget, a comparison of roof production technology and a special topic is a structural analysis of roof girder.

APA, Harvard, Vancouver, ISO, and other styles

8

Osina, Lukáš. "Stavebně technologický projekt montované haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227664.

Full text

Abstract:

The subject of this diploma thesis is a construction technology project prefabricated tennis hall with facilities in Prostejov. The content of this work are technical regulations, technical reports, project site equipment, design of mechanical assemblies, schedule, budget, monitoring and test plan, work safety and environmental protection.

APA, Harvard, Vancouver, ISO, and other styles

9

Lukešová, Edita. "Lékařský dům ve Zlíně - příprava a organizace výstavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226992.

Full text

Abstract:

Diploma thesis contains descriptions of technological process of Medical House Kotěrova. The project includes a technical report for masonry and monolithic constructions, mechanization plans, safety and guality of work, report scheduling and organization of construction.

APA, Harvard, Vancouver, ISO, and other styles

10

Higgins, Paul Anthony. "Reducing uncertainty in new product development." Thesis, Queensland University of Technology, 2008. https://eprints.qut.edu.au/20273/1/Paul_Higgins_Thesis.pdf.

Full text

Abstract:

Research and Development engineering is at the corner stone of humanity’s evolution. It is perceived to be a systematic creative process which ultimately improves the living standard of a society through the creation of new applications and products. The commercial paradigm that governs project selection, resource allocation and market penetration prevails when the focus shifts from pure research to applied research. Furthermore, the road to success through commercialisation is difficult for most inventors, especially in a vast and isolated country such as Australia which is located a long way

APA, Harvard, Vancouver, ISO, and other styles

11

Higgins, Paul Anthony. "Reducing uncertainty in new product development." Queensland University of Technology, 2008. http://eprints.qut.edu.au/20273/.

Full text

Abstract:

Research and Development engineering is at the corner stone of humanity’s evolution. It is perceived to be a systematic creative process which ultimately improves the living standard of a society through the creation of new applications and products. The commercial paradigm that governs project selection, resource allocation and market penetration prevails when the focus shifts from pure research to applied research. Furthermore, the road to success through commercialisation is difficult for most inventors, especially in a vast and isolated country such as Australia which is located a long way

APA, Harvard, Vancouver, ISO, and other styles

12

Doruška, Jan. "Stavebně technologický projekt dostavby výrobní haly v Drnovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240283.

Full text

Abstract:

This master’s thesis contains selected parts of construction-technological project of completion for a manufacturing hall in Drnovice. Based on the documentation used, the focus is aimed mainly at the technological report for the project and its coordination with broader relations of transport routes. Beside these topics, we discuss time and financial plans of the construction, equipment on the construction site, a proposal of main building machinery and mechanisms and the time plan of the main construction project. Furthermore, we provide a technological instructions, control trial plan for i

APA, Harvard, Vancouver, ISO, and other styles

13

Alexa, Martin. "Stavebně technologický projekt mateřské školy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371896.

Full text

Abstract:

This thesis handles the construction and technological project of nursery school in the Brno. It deals with technical reports, technological methods of construction. The report contains technical reporst of building equipment, schedule, design of mechanical assembly, inspection and health and safety at work.

APA, Harvard, Vancouver, ISO, and other styles

14

Тишко, Надія Іванівна, та Nadiya Tyshko. "Розробка інтерактивного середовища соціалізації мовою програмування Java Script, фреймворк Meteor JS". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29455.

Full text

Abstract:

Дипломна робота на здобуття освітнього ступеня магістр за спеціальністю 121 – Інженерія програмного забезпечення. – Тернопільський національний технічний університет імені Івана Пулюя, Тернопіль, 2019 р. Метою дослідження є реалізація концепції мінімалізму, яка полягає у створені продукту призначеного лише для зручного та ефективності обміну даними, без перевантаження додатковими функціями, з врахуванням потреб та дотриманням вимог з юридичної сторони питання. Суть дипломної роботи полягає у створенні програмного продукту, реалізація якого дасть змогу створювати, формувати і розвивати конц

APA, Harvard, Vancouver, ISO, and other styles

15

Lee, Terry Tak-Keon. "Safety analysis report and technical specifications of the MITR fission converter facility for neutron capture therapy." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43345.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Němec, Lukáš. "Laboratorní centrum UTB Zlín - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227703.

Full text

Abstract:

This diplome thesis is focused on the technological project of the gross building of the Laboratory Center UTB in Zlín. Among other subjects, the work consists of technical report, technical rule, inspection and test plans, mechanical assembly desing, financial comparison of various casting methods, health and safety plan, environmental protection issues, budget, timetable and building site situation.

APA, Harvard, Vancouver, ISO, and other styles

17

Fatura, Josef. "Bioplynová stanice-stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227770.

Full text

Abstract:

The subject of my thesis is the technological phase biogas plant. I focused in detail on the buildings SO01 - Hala income and treatment of raw materials and SO02 - Operating building a cogeneration unit. The concreting, formwork and reinforcement substructure object SO01 I developed technological prescription. Furthermore, my work includes a technical report on the structural and technological project, construction situation, time and financial planning, study, implementation of major technological stages, construction machinery, crane assessment, project site equipment, plan for securing mate

APA, Harvard, Vancouver, ISO, and other styles

18

Andrews, Peter T. J. "Design reuse in a CAD environment." Thesis, Brunel University, 1999. http://bura.brunel.ac.uk/handle/2438/5086.

Full text

Abstract:

For many companies, design related information mainly exists as rooms of paper-based archives, typically in the form of manufacturing drawings and technical specifications. This 'static' information cannot be easily reused. The work presented in this thesis proposes a methodology to ease this problem. It defines and implements a computer-based design tool that will enable existing design families to be transformed into 'dynamic' CAD-based models for the Conceptual, Embodiment and Detailed stages of the design process. Two novel concepts are proposed here, i) the use of a Function Means Tree to

APA, Harvard, Vancouver, ISO, and other styles

19

Kotulič, Dominik. "Záznamového zařízení pro oblast civilního letectví." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376993.

Full text

Abstract:

In the thesis the design of the Data Storage System (DSS) is proposed with the respect to the V-Model methodology. The design is based on users requirements, from which the system requirements are created and the technical specification of the DSS is developed. In the technical specifications the functionality of the DMM and HMI DSS subsystems are described and sub-system requirements are assigned to them, then they are subdivided and assigned to individual DMM (Data memory module) and HMI hardware items. Moreover, requirements are analyzed on hardware items, specific electronic components, ar

APA, Harvard, Vancouver, ISO, and other styles

20

Zajíček, Miroslav. "Výrobní hala s administrativní částí v Lanškrouně, příprava a realizace stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372101.

Full text

Abstract:

The subject of the thesis is the construction technological planning and implementation of a production hall construction with an administrative part in Lanškroun. The thesis contains a technical report, site equipment, studies of technological implementation, a time and financial schedule, a design of the main building machines and mechanisms, a time schedule and time standard, technological specification and the relevant inspection and test plans will be written.

APA, Harvard, Vancouver, ISO, and other styles

21

Halanič, Daniel. "Příprava a realizace Protonového terapeutického centra v Praze." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392189.

Full text

Abstract:

The diploma thesis deals with the construction technological project of carcass SO – 001 Proton Therapy Center. The thesis is focused on part B (gantry) of hospital building Proton Therapy Center in Bulovka Hospital area in Prague. The thesis is being processed vertical and horizontal massive monolithic reinforced concrete skeleton realization. The thesis is report, budget, time schedule, technological specification, design of site equipment, design of machinery, design of road construction and next text and drawing documentation processed by assignment of diploma thesis.

APA, Harvard, Vancouver, ISO, and other styles

22

Bočková, Andrea. "Stavebně technologický projekt přípravy a realizace administrativní budovy firmy TREFAL, spol. s r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409917.

Full text

Abstract:

The aim of this thesis is the development project of the firm TREFAL, Spol. s.r.o. The object SOO2 - Administrative building - that is a constituent of the area of TREFAL, Spol. s.r.o. is discussed topic of this thesis. The main focus is the construction development of the monolithic supporting construction objects. The thesis further depicts and investigates accompanying and overall technical report, an implementation study of the main technological stages, situational designs, a solution of the broader traffic relations including a proposal for the supplementation of the construction develop

APA, Harvard, Vancouver, ISO, and other styles

23

Hájek, Tomáš. "Stavebně technologický projekt přípravy a realizace autobusového terminálu v Benešově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409921.

Full text

Abstract:

The subject of this diploma thesis is construction project for implementation of bus terminal in Benešov. This thesis contains technical report, construction study of main technological stages, supply management for selected technological processes, technical report of site facilities including drawings, construction machinery and equipment for selected technological processes, technological specification for execution of earthworks SO01 & SO02, technological specification for execution of foundations SO01 & SO02, control and test plan for execution of earthworks, control and test plan for exe

APA, Harvard, Vancouver, ISO, and other styles

24

Figura, Tomáš. "Bytový dům v Jihlavě, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226975.

Full text

Abstract:

The topic of this master´s thesis deals with a structural and technological preparation of implementation of apartment building in Jihlava. The Apartment building is designed as a building including garages and dwelling units. In the lower part of the building is constructed of reinforced concrete combined system, which is from the 2.PP to 2.NP. The building is designed as a brick system with concrete ceilings on the upper floors. The lower 3 floors are designed as parking garage and a remaining six floors are designed as apartments. The project deals with the entire construction of buildings

APA, Harvard, Vancouver, ISO, and other styles

25

Dobrovská, Monika. "Výrobní hala s administrativní částí v Ústí nad Orlicí - Hylváty, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239956.

Full text

Abstract:

The subject of the thesis is the construction and technological preparation of a production hall building with an administrative part in Ústí nad Orlicí – Hylváty. For the construction project a technical report, site equipment, studies of technological implementation, a time and financial schedule, a design of the main building machines and mechanisms, a time schedule and time standard, technological specification and the relevant inspection and test plans will be written. The other task includes a comparison of the two building envelope technologies, a contract for work, a plan of risks for

APA, Harvard, Vancouver, ISO, and other styles

26

Soják, Zbyněk. "Certifikační postupy pro experimentální letouny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228076.

Full text

Abstract:

Work includes certification procedures for experimental aeroplanes. Producer must answer individual work for right procedure certification. Office UCL give works and control production procedure aeroplane. Stationery (applications, confirmation, tec.) are part of work and is need make and feed. Part of work is VUT 001 MARABU and technical characteristics aeroplane.

APA, Harvard, Vancouver, ISO, and other styles

27

Duarte, Dorivaldo Costa. "Análise, dimensionamento e design de um sistema fotovoltaico para um edifício de serviços." Master's thesis, Universidade de Évora, 2019. http://hdl.handle.net/10174/26502.

Full text

Abstract:

No âmbito deste plano de trabalhos para a dissertação de mestrado pretende-se analisar e conceber um sistema fotovoltaico para as necessidades energéticas de um consumidor do sector de serviços. Neste contexto, após uma análise dos perfis de consumo do edifício realizar-se-á um enquadramento da instalação, mediante as condições apresentadas pelo edifício onde se pretende incorporar o sistema fotovoltaico supracitado, segundo o conceito dos BAPV. Este sistema será concebido com o propósito de aproveitar o facto do horário laboral/ ocupação do edifício coincidir justamente com o perfil diário de

APA, Harvard, Vancouver, ISO, and other styles

28

Vojtek, Ondřej. "Stavebně technologický projekt bytového domu v Brně - Slatině." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372271.

Full text

Abstract:

This diploma thesis deals with construction and technological project of apartment building in Brno – Slatina, Kigginsova street. Thesis focus on technological phase of monolithic rough superstructure and masonry work. For this phases were processed technogical specifications and controlling ad testing schedules. Within this thesis was also compiled technical report, solution of transport roads, technical report and drawings of site equipmet. For main object was compiled itemized budget, which was foundation for completing time schedule. In diploma thesis are further processed safety requireme

APA, Harvard, Vancouver, ISO, and other styles

29

Těžký, Filip. "Příprava realizace bytového domu v Brně - Slatině." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391973.

Full text

Abstract:

The diploma thesis deals with the building - technological project of the apartment house in Brno - Slatina, Lučiny. The purpose will be an optimal design of construction progress with regard to finance and time. For this phase were processed the site equipment with the design of the lifting strap, the transport routes and the machine assembly. In addition, an item budget, which was followed by a detailed schedule. Based on these documents was created a balance of machines and workers. For monolithic constructions were developed a technological regulation and a control and test plan. Furthermo

APA, Harvard, Vancouver, ISO, and other styles

30

Toman, Jan. "Skladová a expediční hala včetně rekonstrukce-stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227065.

Full text

Abstract:

Subject of this thesis is construction technology project storage and dispatch hall in Třebíč. This thesis contains technical report, construction site equipment project, time and financial plan, bill of quantities, technology study of the major technology stages, mechanical assembly design, technological specification, quality inspections.

APA, Harvard, Vancouver, ISO, and other styles

31

Chytal, Roman. "Výrobní hala nástrojárny firmy TOKOZ - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227181.

Full text

Abstract:

The thesis is focused on building technology solutions construction production hall toolmaking of company TOKOZ,a.s. in Žďár nad Sázavou. This thesis contains technical report, construction site equipment project, time and financial plan, bill of quantities, technology study of the major technology stages, mechanical assembly design, technological specification, quality inspections and risks in the implementation of ground works.

APA, Harvard, Vancouver, ISO, and other styles

32

Hanzlovská, Nikola. "Stavebně technologický projekt skladovacího a výrobního areálu - Nihošovice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240181.

Full text

Abstract:

The subject of this thesis is the construction and technological project of warehouse and production facility - Nihošovice . The thesis is mainly focused on the study of the main technological parts and technological specifications for the implementation of the mounted frame, which solves loadbearing system of the building. For the technological specifications is processed control plan , health and safety . The thesis project consists of building equipment, technical reports , time and financial plan of the SO A1 , the proposal of machines and mechanisms, coordinating site plan and block plan

APA, Harvard, Vancouver, ISO, and other styles

33

Axelsson, Alice, and Elinor Johansson. "UTREDNING AV UPPHANDLINGSDOKUMENT VID OFFENTLIG UPPHANDLING MED FOKUS PÅ ÄTA-ARBETEN." Thesis, Tekniska Högskolan, JTH, Byggnadsteknik och belysningsvetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-50985.

Full text

Abstract:

Purpose: Today two of the biggest problems within the construction industry in Sweden is the exceeding of budgets and that the projects do not finish in time. One of the reasons is the use of alterations, supplementary- and withdrawn work that occurs during the project. The purpose is therefore to study the variations that can be related to the documents that are used during public procurement as well as provide some suggestions on how the procurement documents can be improved for future projects. Hence trying to decrease the use of variations in projects. Method: The study consists of a multi

APA, Harvard, Vancouver, ISO, and other styles

34

Santos, Cícero Marciano da Silva. "Análise dos indicadores do TCPO e de empresas construtoras de edificações verticais utilizados na elaboração de orçamentos por empresas de João Pessoa." Universidade Federal da Paraíba, 2010. http://tede.biblioteca.ufpb.br:8080/handle/tede/5279.

Full text

Abstract:

Made available in DSpace on 2015-05-08T14:53:41Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 2192461 bytes, checksum: 44cb1d1df4fc89a759c3d56900b4d84b (MD5) Previous issue date: 2010-03-02<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES<br>This thesis deals with one the most important issues that include construction which is the production costs control. Due to the complexity of construction systems, companies find it difficult to determine and control costs during performance of services. In general this control is identify the variations between budgeted cost

APA, Harvard, Vancouver, ISO, and other styles

35

Stašová, Darina. "VUT - Rekonstrukce objektu A1-stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240164.

Full text

Abstract:

Subject of this diploma thesis is construction technology project of reconstruction of object A1, faculty of mechanical engineering, BUT in Brno. This diploma thesis contains technical report of construction site, construction site equipment project, time and financial plan, budget of one building object, technological study of the major technology stages, design of mechanical equipment, technological specifications and quality controlling inspections.

APA, Harvard, Vancouver, ISO, and other styles

36

Salazar, Gustavo, Wilmer Solis, and Leonardo Vinces. "A Mechanical Development of a Dry Cell to Obtain HHO from Water Electrolysis." Universidad Peruana de Ciencias Aplicadas (UPC), 2021. http://hdl.handle.net/10757/653837.

Full text

Abstract:

El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado.<br>This article proposes a mechanical development of a dry cell in order to obtain HHO through water electrolysis. Calculations and technical specifications of the materials used for implementation are supported by mathematical, physical and chemical formulas and theories (Faraday´s Law, electrolysis process and mechanical design). The importance of mechanical design is focused on achieving efficient use of the energy provided to the cell that all

APA, Harvard, Vancouver, ISO, and other styles

37

Monteiro, Joana Patrícia Gonçalves Dias. "Influência das especificações técnicas do produto na intenção de compra de calçado de corrida." Master's thesis, Instituto Superior de Economia e Gestão, 2017. http://hdl.handle.net/10400.5/14778.

Full text

Abstract:

Mestrado em Marketing<br>Esta investigação teve com intuito a análise do perfil do consumidor, a nível das suas características específicas de prática e consumo de calçado em corrida, relacionando com o envolvimento de consumidor na comunicação de características técnico-funcionais da categoria de calçado em estudo. Em paralelo, procurou-se identificar diferentes segmentos/clusters de consumidores de calçado de corrida, com recurso a variáveis de motivação para a prática e estabelecer uma relação com o envolvimento das características técnicas na decisão de compra em calçado de corrida. A met

APA, Harvard, Vancouver, ISO, and other styles

38

Zaťko, Ondřej. "Příprava realizace kaskádových domů, Olomouc - Hejčín." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227258.

Full text

Abstract:

The content of this thesis is the construction of new technological project of apartment buildings A and B in Olomouc. Residential buildings A and B are identical, but are differently oriented to the cardinal points. Buildings are designed terraces. Buildings have a 4th floor 1PP. The supporting structure is made of monolithic reinforced concrete columns and ceilings. Infill walls are composed of ceramic blocks. In the 1st floor are located garage, the other floors are designed as residential.

APA, Harvard, Vancouver, ISO, and other styles

39

Hanáček, Patrik. "Bytový dům Hostivař - stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240053.

Full text

Abstract:

The theme of the diploma thesis is elaboration of selected parts of the construction technology project in building block of flats Hostivař. Content of this project is technological solution for realization of this project. It means working on time planning of construction, right using of human, material and machinery sources and controlling system for selected part of the building. In attachment of the diploma thesis, there are also drawings of building site equipment for different construction phases. The goal of the diploma thesis is design right and economical procedure for realization of

APA, Harvard, Vancouver, ISO, and other styles

40

Chávez, H., H. Chávez, A. Pezo, G. Llerena, and V. Torres. "Theoretical design proposal for simulated hot asphalt mixture at a temperature below zero degrees Celsius." Institute of Physics Publishing, 2020. http://hdl.handle.net/10757/651795.

Full text

Abstract:

In the world there are adverse climates, climates that hinder the good construction and paving of roads, generating insecurity among the locals and visitors. This over time affects the economy of a country, as a road boosts tourism, transport and commerce. Therefore, a mixture was designed to mitigate a problem in the placement of hot asphalt mixture at temperatures below zero degrees Celsius. That is, a conventional mix design was proposed, but with different types of filler (lime, Portland cement type I and silica) tested with the Marshall and Lottman method which are governed according to t

APA, Harvard, Vancouver, ISO, and other styles

41

Zaytseva, Anna. "Standardization in Innovation Policy and the European Integration : New Concepts for the New World." Thesis, Linköpings universitet, Statsvetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-72780.

Full text

Abstract:

This is a study of standardization in complexity. The context is innovation policy. Why do standardization and innovation go hand in hand and what does the interaction of interests between public and private actors look like in the “profile” of the standardization process? The nature of technical specifications, Lead Market Initiatives in Europe, social innovations, eco-innovations and psychological services for recruitment are the target areas of this study done in the style of Science, Technology and Society. We decrypt the codes of the expected behavior veiled in standards, the strategicall

APA, Harvard, Vancouver, ISO, and other styles

42

Buček, Radek. "Centrální dispečink pro řízení železniční dopravy Praha - příprava realizace a řízení stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239946.

Full text

Abstract:

The thesis deals with the preparation of the implementation and management of building central dispatching of rail traffic management Prague. The thesis contains the selected part of building technological project together with appropriate drawings. The project addresses mainly the rough construction of the mainbuilding.The aim of this thesis is to design appropriate and effective way of realization of construction depending on local conditions.

APA, Harvard, Vancouver, ISO, and other styles

43

Šilhová, Kristýna. "Projekt přípravy a realizace výrobní a skladovací haly v Mniší." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372026.

Full text

Abstract:

The diploma thesis deals with the realization of a production and storage hall for the engineering industry. Part of the realization of the production hall is the demolition work of the existing agricultural building. The reconstruction of the existing premises of locksmith's workshop and dressing room for employees is also being implemented. For the preparation of this project, the thesis deals with the implementation of the main technological stages, technological plans for demolition work and substructure, transport routes of the main building materials and machines, technical report of the

APA, Harvard, Vancouver, ISO, and other styles

44

Ševela, Ondřej. "Příprava a realizace výrobní haly v Holešově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392129.

Full text

Abstract:

The diploma work has been dealing with the building and technological design of a production hall in Holešov. The work includes the general and specification report, the study of main technological phases, the site plan, the technological specification solving the transportation relations and coordination of oversize transportation, time and financial schedule of the construction, material supply plan including staff review, the time schedule for pre-cast frame assembly, machinery plan including the time employment, the site plan including the drawings, technological specification of pre-cast

APA, Harvard, Vancouver, ISO, and other styles

45

Procházková, Šárka. "Stavebně technologický projekt bytového domu v Boskovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240189.

Full text

Abstract:

Content of this master‘s thesis is construction technological project of apartment block in Boskovice. The masters’s thesis contains technical report of the building, suggested construction site installations, proposal of suitable machines and mechanisms required for construction, further it solves wider relations of transport lines to construction site, budget and time schedule. Detailed procedure of assembly of the load-bearing roof truss and the roof sheathing is provided in specifications. Safety and health protection, control and test plans are elaborated for stage of the building roofing

APA, Harvard, Vancouver, ISO, and other styles

46

Výstup, Petr. "Vybrané části stavebně technologického projektu - VĚDECKOTECHNICKÝ PARK TRIANGL." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227287.

Full text

Abstract:

The topic of this diploma thesis deals with the solution of selected parts of building technology design of Scientific and Technical Park Triangl that is planned to be constructed in Uherske Hradiste. This complex of buildings will be used for civil, administrative and residential purposes. The thesis describes creation of foundation constructions, design of reinforced concrete frames, transportation of building materials and machinery to the building site. This thesis also contains a design and a technical report about facilities of the construction site, pre-defined mechanical assembly, cont

APA, Harvard, Vancouver, ISO, and other styles

47

Liao, June-Chen, and 廖容誠. "Application technical specification research to plasticizing sector." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/13702211340064427378.

Full text

Abstract:

碩士<br>佛光大學<br>經濟學系<br>95<br>Nowadays in society's people face the original material price rises, in the inflation pressure as well as the bank rate not high situation, facing when oneself manages finances the plan, usually can choose take the stock market, the fund, the foreign exchange, the real estate and so on does as the investment tool, is most exuberant by stock market's human spirit. But in the stock market business is extremely complex also the sensitive market, can affect to the stock price factor has very many, like basic surface, news surface, chip surface, technical surface, politi

APA, Harvard, Vancouver, ISO, and other styles

48

Chiu, Chien-Hao, and 邱建豪. "Technical Specification Research for Recycling of the Construction Waste." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/16683976105186777795.

Full text

Abstract:

碩士<br>國立中興大學<br>土木工程學系<br>90<br>Taiwan annually produce a large amount of construction waste, which at large are concrete and brick materials. This type of waste is very heavy, and it is hard to transport and throw away, but it has fundamental of strength, and it worth to reuse. In order to reuse concrete and brick materials effective, this study count of recycling problem analysis and solution, as well as to estimate use suitability on recycle material for construction engineering, also to consult many study and technical specification, to draft a concrete and brick mate

APA, Harvard, Vancouver, ISO, and other styles

49

Ta-He, Yang, and 楊大鶴. "A Study of Interactive Electronic Technical Manual Data Base Specification." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/72373655848886957772.

Full text

Abstract:

碩士<br>國防管理學院<br>國防資訊研究所<br>88<br>Recently, with the progressive of information technology, the tactics " Continuous Acquisition and Life-cycle Support, CALS " was set into action, and have had promoted the efficiency of the Army logistics support assignments. One of the most implemention was interactive electronic - technical manual (IETM). The standards of ROC''s military CALS was based on the standards of US military " MIL-PRF-87268A " & " MIL-PRF-87269A ". For given an impetus of IETM relevance system successfully, a succession of further study about the two US military standards was necess

APA, Harvard, Vancouver, ISO, and other styles

50

Ni, Cheng-Liang, and 倪成亮. "An Investigation of Technical Specification for EMU of Rapid Transit System." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/90484283912349767576.

Full text

Abstract:

碩士<br>國立台灣工業技術學院<br>營建工程技術研究所<br>85<br>This study investigates the content of the research on the standard for technical specification of Metro Vehicles for rapidtransit systems. The EMU in Kaohsiung and Taipei rapid transitsystems are introduced first. Second, topics which must be decided in the early stage of planning are discussed, such as methods to form a train, evacuation of passengers on train, and methods of power collection. Then, subsystems of metro vehicles are included. They inc

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!