Log in

Relevant bibliographies by topics / Technological Facilities / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Technological Facilities.

Dissertations / Theses on the topic 'Technological Facilities'

Author: Grafiati

Published: 5 June 2025

Last updated: 8 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Technological Facilities.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lindkvist, Carmel Clifford. "The investigation of technological adoption in a facilities management department at a financial institution : from idea to implementation." Thesis, University of Reading, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.553068.

Full text

Abstract:

This thesis is concerned with the introduction of a technology, Radio Frequency Identification (RFID) for facilities management (FM) services. FM is argued to be a complex discipline which results in diverse discourses from actors internal and external to FM. In order to investigate and understand what this means for FM, concepts and a model from service innovation theory are employed. The Critical Discourse Analysis (CDA) position based on social constructionism also informs the investigation. Empirically, one in-house FM department in a financial institution was used to case study the introduction of RFID for the FM areas of security access control and workplace management. The case study involved two years of field work where the author had a dual role of being employed by the organisation and a researcher for her study. Primary data included participant observations and interviews with actors. Secondary data was in the form of corporate artefacts. Findings illustrate the discourses of the relevant actors toward the technology introduction in a critical way. The discourses that emerged at each stage of the innovation process described in the case study either hindered or drove technology introduction. Power and context played a role in determining the discourse that prevailed within each stage. The process of introducing the technology divulged into four trajectories which were strategy, technology, service professional or entrepreneur. Trajectories occurred simultaneously and certain trajectories were stronger than others depending on the innovation stage and the actors' discourses. Overall, lessons learnt that shed light in understanding technology introduction in FM was enabled from a unique methodological approach to this topic. Insights were pulled together and argued that discourses of actors at the micro and macro level of the power structure are influential in introducing technology. The introduction of new technology to FM is found to be complex due to the nature and context of the FM discipline.

APA, Harvard, Vancouver, ISO, and other styles

2

Adama, Unekwu Jonathan. "A study of the impact of technological innovations on the social sustainability of facilities management employees in South Africa." Doctoral thesis, Faculty of Engineering and the Built Environment, 2019. http://hdl.handle.net/11427/31489.

Full text

Abstract:

This research investigates the impact of technological innovations (TIs) on the social sustainability of facilities management (FM) employees in South Africa. The rationale for the study is that no empirical evidence shows how the adoption of TIs impacts the social sustainability of FM employees. The study adopts the sequential mixed-methodology approach. The quantitative phase makes use of a questionnaire survey which formed the foundation for the qualitative interview phase. The relative importance index (RII) is used to analyse different questions, such as (1) the factors influencing the adoption of TIs in FM organisations (2) the impact of the TIs on FM practice, (3) the localisation of the employee social sustainability factors and (4) the determination of the impact of TIs on the social sustainability of FM employees. An Interpretive Structural Model (ISM) approach is used to determine which social sustainability factor(s) should be prioritised while promoting the social sustainability of the FM employees. The findings of this study show that cloud-based TIs, ICT-based TIs and sensor-based TIs are the most popular in FM organisations in South Africa. Furthermore, the impact of TIs on the core business factors in FM organisations have a mean score of between 3.00 to 3.19 depending on the factor of interest. The RII analysis led to the development of the initial FM employee social sustainability framework which identified “job security”, “remuneration” and “professional status” as the three most important FM employee social sustainability factors. However, the ISM analysis which considered hierarchy, driving power and dependence of the factors identified “organisation policy” as main factor in level five that drives other employee social sustainability factors. Furthermore, “overwork”, “autonomy”, “interpersonal relationship”, “work and home-life balance” and “retirement development plan” were the root factors in level four that must be prioritised by facilities managers to promote employee social sustainability. The study contributes to knowledge by identifying the most popular TIs that are adopted by FM organisations in South Africa, and determining the interrelationship, hierarchical importance and dependences of the various employees’ social sustainability factors in FM organisations. Through the development of the framework for FM employee social sustainability, facilities managers have the knowledge of the factors to prioritise when they need to promote the social sustainability of their employees. The study recommends that FM organisation policies on TI adoption must align with the overall socio-economic wellbeing program to contribute to social sustainability in South Africa.

APA, Harvard, Vancouver, ISO, and other styles

3

Rozehnalová, Andrea. "Přestavba průmyslového areálu - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265433.

Full text

Abstract:

This thesis handles the construction and technology project for the construction of the Hall in a former cold storage complex. In the work is handled by the implementation of a comprehensive study, including schedule, financial planning, technological regulation for the supporting structure of the Hall. Further deals with the design of the main building mechanism, design, construction site facilities, inspection and test plan.

APA, Harvard, Vancouver, ISO, and other styles

4

Kašpar, Radek. "Stavebně technologický projekt oční kliniky." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265452.

Full text

Abstract:

Diploma thesis with construction technological project Eye Clinic. Contents of construction technological project are project engineering report, study of realization of main technological stages, engineering report of site equipment, technological regulation scaffolding and technological regulation insulation, inspection and test plan

APA, Harvard, Vancouver, ISO, and other styles

5

Gurgul, Roman. "Vybrané části stavebně technologického projektu realizace obloukového mostu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226102.

Full text

Abstract:

Diploma thesis deals with constructive technological preparation of bridge structure SO-201. This 86m long bridge is located in a non-built-up area of the city of Nitra in Slovakia. Bridge structure is part of project Highway R1 Nitra, západ - Selenec. Bridge is formed by a self-anchored arch structure with intervening bridge deck.The bridge superstructure is formed by steel arches filled with concrete ,steel girders and beams locked with a reinforced concrete slab.

APA, Harvard, Vancouver, ISO, and other styles

6

Durčák, Petr. "Rozšíření kapacity MŠ Slavkov u Brna – stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225362.

Full text

Abstract:

The object of diploma thesis is a construction technology project capacity extension of nursery school Zvidalek in Slavkov u Brna. Work includes facilities of building site, technological rule of waterproofing, schedule, item budget, plan of checks and tests, design of machinery, safety and health at work and economic, time and transport evaluation of two versions of ceiling construction.

APA, Harvard, Vancouver, ISO, and other styles

7

Kolář, Jan. "Bytový dům Nové Pitkovice,objekt T+S - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226485.

Full text

Abstract:

Master's thesis deals with the processing of building technology project for construction of residential house T + S in Praha Nové Pitkovice. Main focus is to develop a technical report on the project of building technology, processing technology and regulations for insulation of flat roof design and inspection test plans. Important part of the solution is the project construction site, design of the main building machines and time schedule during construction.

APA, Harvard, Vancouver, ISO, and other styles

8

Patočka, Bronislav. "Penzion Skalka-stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227061.

Full text

Abstract:

This master´s thesis solves the building and technological project of a new guest house building in the village Skalka u Prostějova. It is a detached building made of brick masonry. The project contains the building of guest house and gabion retaining wall with parking place. Thesis is comprised of, inter alia, technological sketch of the main phases of building, time and financial plan, site facilities project, machinery proposal, budgets, technological rules and inspection and test plan.

APA, Harvard, Vancouver, ISO, and other styles

9

Janek, Stanislav. "Hotel v Čeladné - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225409.

Full text

Abstract:

This thesis is focused on the developing of the implementation phase of the Hotel MIURA in the village of Čeladná. The project is describing particular stages of technological realization of this construction, technology, implementation of the main subject of hydro-insulation system, including design control and test plan for its implementation, design and description of site equipment, the draft contract for realization. The work is further supplemented by an objects schedule and detailing schedule of the main hotel building, a description of major equipment and materials used, budget for the main calculations of the object and other objects.

APA, Harvard, Vancouver, ISO, and other styles

10

Kolářová, Jana. "Zastřešení zimního stadionu Krnov - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227623.

Full text

Abstract:

This Master´s thesis deals with the realization of roofing winter stadium in Krnov. Selected points of construction technology project are technical report, financial plan and schedule, project site facilities and design of the main construction machinery. Detail work solves rough superstructure. This part contains the technological prescription of specifications supporting the roof structure, transportation of oversized glued arched trusses, inspection and test plan, risks and precaution, a detailed schedule and itemized budget. The work also includes a draft contract for work.

APA, Harvard, Vancouver, ISO, and other styles

11

Surý, Václav. "Stavebně-technologický projekt pavilonu horského hotelu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226498.

Full text

Abstract:

This master´s thesis solves the constructive - technological project of pavilion of mountain hotel. It is an extension of pool hall. The master´s thesis includes: nail shoring walls, jet grouting, excavation, reinforced concrete base pan. There are technological solutions, especially prescription nail walls and jet grouting. Solution also contains the site facilities, the schedule, the situation with the solution structure of transport routes, itemized budget, proposed mechanical assembly, safety and health at work.

APA, Harvard, Vancouver, ISO, and other styles

12

Dvořák, Petr. "Zařízení sociální péče ve Svitavách - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225624.

Full text

Abstract:

Diploma thesis deals with a building technological project – Social care Institucion in Svitavy. It is about a new building of retimerent home with ground plan creating a letter „ U“. The building is dilated into 3 parts: Unit „A“,Unit „B“, Unit „C“. The aim of diploma thesis is construction desing which covers site facilities technological standart, inspecting and testing plan, time and finenciel plan.A part of thesis is also specializacion in thermal protection cres.

APA, Harvard, Vancouver, ISO, and other styles

13

Janků, Ondřej. "Výstavba výrobní a administrativní budovy - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227825.

Full text

Abstract:

The subject of my master's thesis is elaboration of construction technological project of research building in Uherské Hradiště. This building is actually outbuilding to existing manufactoring plant. The work includes solution of transport rotues and supplying construction site by main construction sources, project of site facilities, mechanization proposal and scheduling. A part of the work is new design of foundation structure and appropriate technological prescriptions and control plan to this because of missing some informations in procurement project.

APA, Harvard, Vancouver, ISO, and other styles

14

Rozsypal, Patrik. "Stavebně technologický projekt sportovní haly Svojsíkova v Českém Těšíně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392011.

Full text

Abstract:

This diploma thesis focuses on the construction technology project of sports hall Svojsíkova in Český Těšín. The aim of this diploma thesis is to process main documents related to construction of the solved sports hall. This means, in particular, to design the construction site facilities and main construction machinery, to process time schedule, budget and technological prescription of floor structures together with control and test plan and construction details.

APA, Harvard, Vancouver, ISO, and other styles

15

Holubová, Jolana. "Skladovací hala ve Znojmě - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226986.

Full text

Abstract:

The diploma‘s thesis solves the realization of the storage hall and the other building operations. There are detailed follow up the technological rules for demolition work, special foundation – drilled piles and assembling of steel construction. The project includes the project of the construction site facilities, machine set, budget, quality of the implementation, time plan and safety.

APA, Harvard, Vancouver, ISO, and other styles

16

Findejs, Lukáš. "Stavebně technologický projekt haly firmy PP&T." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227774.

Full text

Abstract:

This thesis includes the construction technology project of the production hall of the company PP&T. The work includes technical report object, technological specification for the shell construction, quality control, report site equipment, a report describing the health and safety forth motion of mechanical assemblies, and a report describing the transport relations. The annexes drawings of site equipment, connection details of prefabricated elements, plan of risks, budget and schedule for the main subject and time financial plan for the whole construction.

APA, Harvard, Vancouver, ISO, and other styles

17

Bajerová, Radka. "Řadové rodinné domy ve Svitavách - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226105.

Full text

Abstract:

The subjects of the thesis are chosen parts of the building technological project for the preparation and realization of the terraced family houses in Svitavy. The solution includes The study of the main technological stages realization, Time schedule and financial plan, The project of the site facilities including design of the main hoisting mechanism. The realization of ceiling construction is described in detail by The technological prescription. The solution also includes a proposal of local and utility roads repairs on the streets Gorkého and U Studeného potoka.

APA, Harvard, Vancouver, ISO, and other styles

18

Zadák, Petr. "Výrobní hala Edscha v Jindřichově Hradci - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227282.

Full text

Abstract:

This thesis addresses the technological project of building a production hall in EDSCHA Henry Hradec. For the construction project will be developed technological studies major technological implementation stages, summary technical report, technological specification for installation of a steel frame and cladding halls, safety measures in the construction, inspection and test plan for the assembly skeleton, time and financial plan for the whole building, budget object SO01 production hall with an administrative extension and extension of production facilities.

APA, Harvard, Vancouver, ISO, and other styles

19

Blažková, Eva. "Stavebně technologický projekt Trutnovského divadla." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225576.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Okrouhlý, Petr. "Futurama business park - objekt C, stavebně technologická příprava." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225380.

Full text

Abstract:

The subject of the thesis is the solution of technological preparation of new building construction Futurama Business Park - the object C. In this thesis, is solved by the implementation of earthwork, foundation structures and reinforced concrete monolithic skeleton. Establishment of the building will be made on the concrete foundation slab. The building is designed as a reinforced concrete frame with perimeter steel columns and glass façade. The work also includes a timetable and financial plan (budget) building, technological regulations, technical report of building equipment, mechanical design assembly, inspection and test plan, design of site facilities, safety plan, impact of technological stage on the environment.

APA, Harvard, Vancouver, ISO, and other styles

21

Дерев’янко, Дмитро Аксентійович. "Механіко-технологічне обґрунтування процесів зниження травмування насіння зернових культур технічними засобами". Diss., Тернопільський національний технічний університет ім. Івана Пулюя, 2018. http://elartu.tntu.edu.ua/handle/lib/25994.

Full text

Abstract:

Дисертаційну роботу присвячено розв’язанню актуального науково-практичного завдання – теоретичних, експериментальних, виробничих та лабораторних досліджень впливу механічних навантажень під час проходження технологічних процесів збирання, оброблення зернового вороху, підготовлення, транспортування, завантаження, протруювання насіння і сівби зернових культур на травмування насіння та конструкційно-технологічних вдосконалень і розроблення на цій основі високоефективних технічних засобів для комплексної реалізації процесів підготовлення високоякісного насіння та смугової сівби шляхом зниження його макро- та особливо мікротравмування.<br>The thesis is devoted to solving actual scientific and practical problem - theoretical, experimental, industrial and laboratory studies of the impact of mechanical stress during their processes of collection, processing grain heap, preparing, transporting, loading, seed treatment and sowing crops for seed and structural injury and technological improvements and the development on this basis of highly effective technical means for the comprehensive implementation of the processes the reproduction of high-quality seeds and sowing strip by reducing its macro- and microdamage.

APA, Harvard, Vancouver, ISO, and other styles

22

Březina, Vojtěch. "Viladům v Humpolci - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239941.

Full text

Abstract:

The work includes construction of a residential building technological project Villahouse Humpolec. Residential building has five floors with ten housing units. In the first above ground is a garage and workshop with separate entrance. The author discusses the main technological stages of construction, which are processed in the following sections of this paper.

APA, Harvard, Vancouver, ISO, and other styles

23

Kvíčalová, Monika. "Hotel Sachrův kopec Harrachov, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392159.

Full text

Abstract:

The diploma thesis deals with construction and technological solution of Hotel Sachrův kopec in Harrachov. Part of the thesis is technical report of main object, study of realization main technological phases, technological prescriptions and inspection and test plans for steel-concrete ceiling construction, copper roof cover and Spiroll panel ceiling construction. Thesis contain project of work side facilities, main construction machinery, shedule of health and safety, environmental protection, coordination situation of transport routes, time and financial plan for construction, drawing of formwork for steel-concrete ceiling construction and drawing of Spiroll panel ceiling.

APA, Harvard, Vancouver, ISO, and other styles

24

Sviták, Roman. "Příprava realizace víceúčelového domu Brno - Klíčova." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226985.

Full text

Abstract:

The thesis is focused on the preparation of realization the multipurpose building Brno - Klíčova. The content of this the thesis is study of construction technology followed by the construction technology project. The aim of the thesis is to identify the sources of the time, money, workers and materials of the building and then select the appropriate process of realization.

APA, Harvard, Vancouver, ISO, and other styles

25

Petřík, Michael. "Stavebně technologický projekt obchodního centra v Aši." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391992.

Full text

Abstract:

This thesis deals technological project shopping centre in Aš. Technological phase solving realization floor finish in central structure. Thesis contains engineering report, studies report main structure, design of main machine and mechanisms, timelines, site equipment, controlling and testing plan, budget plan, plan of realization road infrastructure.

APA, Harvard, Vancouver, ISO, and other styles

26

Topinka, Jiří. "Dalniční most u Soběslavi - příprava, realizace a řízení stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227312.

Full text

Abstract:

Master´s thesis processes Construction technology project and implementation of bridge at Soběslav on the route D3, section D3 Tábor – Veselí nad Lužnicí, concretely SO 7-216 Bridge over the route III/15527, Černovický stream and biocorridor km 94,100. This is a permanent road bridge about 25 fields with the continuous construction of precast prestressed concrete beams longitudinally coupled concrete slab.

APA, Harvard, Vancouver, ISO, and other styles

27

Vybíral, David. "Rezidence Sochorova - bytový dům BD 2, stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227859.

Full text

Abstract:

This thesis describes the building of a residential house called Rezidence Sochorova BD02 in Brno, Žabovřesky. The aim was the creation of the main parts of a constructional-technological project focused on the design of transport relations, the construction site facilities and its machinery, the creation of selected technological regulations and their control and testing plans. To secure safety and to protect health during the construction work itself, a risk plan and a suggestion of safety aids was created. In addition, an itemized budget of the construction, a time plan, environmental protection and a financial and time comparison of using a hopper in contrast to a concrete pump.

APA, Harvard, Vancouver, ISO, and other styles

28

Halouzka, Jakub. "Rekreační objekt Kouty nad Desnou - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226487.

Full text

Abstract:

In this thesis, technological project of building an apartment house in Kouty Desnou is presented. The thesis will include drawings of the site facilities, budget, three technological regulations to solved stages, building technology study, scheduling, resource and material balance, control and test plan and safety.

APA, Harvard, Vancouver, ISO, and other styles

29

Andres, Josef. "Bytový dům U Vojanky – stavebně technologická příprava." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226495.

Full text

Abstract:

The content of this thesis is the construction project of technological of residential building U Vojanky in Prag. The new residential building is comprised of two parts that are interconnected by connecting neck. Author deals with the most important technology stages of construction that are processed in following parts of this thesis.

APA, Harvard, Vancouver, ISO, and other styles

30

Lisztwanová, Mariola. "Stavebně technologický projekt stavby Nové byty - Bystřice na Pasekách." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225648.

Full text

Abstract:

The subject of the thesis is the Constructive-Technological Project of building New Flats – Bystrice on Paseky. The building will be realized at the building plot of land within a developed area. The attempt is to leave the calm rural character of the surroundings undisturbed. The bulding is supposed to merge with the surroundings. Concerned are two apartment buildings with grand plans of 18 x 36 meters, disposing of three above-ground floors, no cellar, and a panel roof. In order to make the building merge with the surroundings, a wooden external cladding has been projected. Thus, the building is supposed to give the impression as if it was constructed of wood.

APA, Harvard, Vancouver, ISO, and other styles

31

Schreiber, Jiří. "Bytový dům AB - Javorová čtvrť II Praha - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409944.

Full text

Abstract:

Theme of the diploma thesis is technical report of the technological project for apartment building AB – Maple district II Prague, which will be realized on Mantovska street, on the plot 539/39 in the district of Horní Měcholupy. For object AB is proccesed technical report of the technological project, studies of realization main technological phases, solution of wider transport relations with a focus on building supply , objects time and financial plan, time schedule, project for site facilities with drawing of five main technological phases, design of main construction machines and mechanisms, technological specification for realization of monolithic reinforced concrete of roughly lower and upper construction, including „white tank“, which forms a peripheral structure of lower construction, balance of workers and main machines, inspection and test plan for constructions from technological specification. As other assignment I make a itemized budget for rough construction, selected points of LEED certification, instructions for using a housing unit and plan of Safety and Helth protection during work.

APA, Harvard, Vancouver, ISO, and other styles

32

Nováková, Martina. "Stavebně technologický projekt dálničního nadjezdu č. D1 - 150." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392186.

Full text

Abstract:

This diploma thesis deals with demolition of the motorway overpass. The bridge (overpass) is located over the D1 motorway from Prag to Brno at the 115,881 km. On the brigde runs the local comunication II/352 between villages Švábka and Měšín. The bridge demolition is part of the D1 renovation plan. The main reason behind the demolitions si that the bridge no longer meets it´s lenght requierments. During the demolition and construction will be any use of II/352 for public transport over the bulding site forbiden. This diploma thesis include technical report for construction technology project, time and financial evaluation of the project. Also the thesis deals with the selected technological regulations of carried out activities, timetable of controls and tests, trafice relationships on wider scale, a list of main building machines and mechanisms with their specification, a concept of the construction site, health and safety requlations, and in detail plans for realization of a road surface layers.

APA, Harvard, Vancouver, ISO, and other styles

33

Hájek, Tomáš. "Stavebně technologický projekt přípravy a realizace autobusového terminálu v Benešově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409921.

Full text

Abstract:

The subject of this diploma thesis is construction project for implementation of bus terminal in Benešov. This thesis contains technical report, construction study of main technological stages, supply management for selected technological processes, technical report of site facilities including drawings, construction machinery and equipment for selected technological processes, technological specification for execution of earthworks SO01 & SO02, technological specification for execution of foundations SO01 & SO02, control and test plan for execution of earthworks, control and test plan for execution of foundations, safety and health protection plan for selected technological processes, construction site noise study and a construction study of reconstruction of roads in the terminal area.

APA, Harvard, Vancouver, ISO, and other styles

34

Gwoździová, Joanna. "Stavebně technologický projekt novostavby pavilonu Veterinární a farmaceutické fakulty v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225647.

Full text

Abstract:

The subject of the thesis is the construction-technological project New flats of Study and Information Centre of Faculty of Veterinary Medicine in Brno. The building will offer a modern study environment for students. There will be a space for the central library as well as the study centre in the SIC. Also, the university archive and museum depository of the Institute of the History of Veterinary Medicine and Pharmacy will take place there. The building will be constituted of three five-floor blocks with overall groundplan size 72,40 x 30,50 m. The construction system is comprised by a ferroconcrete frame. The block C (the northern one) has one underground floor. At the level of the first uderground floor, the particular blocks are interconnected by an installation corridor. At the level of the second and third above-ground floor, the blocks are linked up with ferroconcrete connecting bridges. In the case of the fourth above-ground floor, the blocks are bridged by a dimensional steel construction which at the same time forms a roof and lifts the glassed frontage along the perimeter of the building. The fifth above-ground floor disposes of recessive steel extenstions of the engine rooms of air conditioning system.

APA, Harvard, Vancouver, ISO, and other styles

35

Šilhová, Kristýna. "Projekt přípravy a realizace výrobní a skladovací haly v Mniší." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372026.

Full text

Abstract:

The diploma thesis deals with the realization of a production and storage hall for the engineering industry. Part of the realization of the production hall is the demolition work of the existing agricultural building. The reconstruction of the existing premises of locksmith's workshop and dressing room for employees is also being implemented. For the preparation of this project, the thesis deals with the implementation of the main technological stages, technological plans for demolition work and substructure, transport routes of the main building materials and machines, technical report of the building site, time and financial plan of the construction, security measures especially for demolition works, quality control when drilling a pilot.

APA, Harvard, Vancouver, ISO, and other styles

36

Chaloupková, Tereza. "Příprava realizace bioplynové stanice v Žitíně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227013.

Full text

Abstract:

The subject of the thesis is the rough construction of production technology biogas plant in Žitín. The content of this work are the technical report, technical regulations, safety, environmental protection, design of mechanical assemblies, solution building equipment, inspection and test plans, calculation of building, individual work schedule and budget.

APA, Harvard, Vancouver, ISO, and other styles

37

Pevný, Ondřej. "Příprava a organizace výstavby Krajské pobočky VZP v Jihlavě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265250.

Full text

Abstract:

Abstract The aim of this thesis is the preparation of the building and technological project of the regional department of the company VZP CR in Jihlava. The content of this thesis is the elaboration of technological regulations for reinforced concrete and prefabricated skeleton and for monolithic external walls. The quality and characteristics of these constructions are solved in the controlled and test plans. Site facilities including occupational safety and health,transport routes for transporting of materials and traffic around the site are addressed in detail in the next section of this thesis. Optimally designed set of machines for realization of this construction is included as well. The diploma thesis determines work procedures so as to take into account the economic aspect and time demands of construction.

APA, Harvard, Vancouver, ISO, and other styles

38

Šusták, Miroslav. "Multifunkční centrum Hlinsko - příprava a realizace stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226490.

Full text

Abstract:

Diploma work Multifunction Centre Hlinsko - preparation and realization of the covers technological studies throughout the building. Diploma work proposes a temporal, financial and material resources. The work included construction budget, schedule of work, technical regulations for demolition, implementation and installation of reinforced concrete ceiling glulam beams. For each technological regulation is developed inspection and test plan. The work includes the project site equipment. Diploma work is based on the technical documents supplied by the designer. The work also includes specialty.

APA, Harvard, Vancouver, ISO, and other styles

39

Cupl, Jiří. ""Tyršův most" Litoměřice, příprava realizace stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240212.

Full text

Abstract:

Master's thesis process construction technology preparation and implementation of project "Tyršův Bridge" in Litomerice. Because condition of bridges is very poor, it was decided to reconstruction them. This is a design for reconstruction of bridges, roads and road-bed on the system of Tyršův Bridge in Litomerice to the extent of the diploma work. During the reconstruction will replace bridges registration no. 15-040 and 15-041 new ones of the same lightness, on the bridge registration no. 15-042 will be replaced roadway and bridge ev.č. 15-043 will be replaced and the structure of the supports. Will be extended road-bed between bridges registration no. 15-040 and 15-041 using gabion construction.

APA, Harvard, Vancouver, ISO, and other styles

40

Hesková, Veronika. "Příprava a realizace výstavby výrobní haly s administrativou." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392062.

Full text

Abstract:

This diploma thesis solves the construction and technological preparation of the production hall with administration building for company Mont-Tech localized in Brno. The following documents are processed for the project. These are: technical report, coordination situation with wider transport route relationships, time and financial plan for construction, study of the implementation of the main technological stages, design of site facilities, proposal of the main building machines and mechanisms, technological regulations and related control and testing plans. In addition were prepared – the itemized budget of the main buildings, the plan of safety and health protection and construction details.

APA, Harvard, Vancouver, ISO, and other styles

41

Šosová, Lenka. "Stavebně technologický projekt bytového domu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226098.

Full text

Abstract:

This thesis deals with construction and technological solutions residential building project in Rokycany. The work includes a technical report, shedule and financial plan drawing of the site, technological prescription

APA, Harvard, Vancouver, ISO, and other styles

42

Ляшук, Олег Леонтійович, О. Л. Ляшук та O. L. Lyashuk. "Науково-прикладні основи створення транспортно-технологічних механізмів неперервної дії сільськогосподарських машин". Thesis, Тернопільський національний технічний університет ім. Івана Пулюя, 2015. http://elartu.tntu.edu.ua/handle/123456789/5653.

Full text

Abstract:

Роботу виконано в Тернопільському національному технічному університеті імені Івана Пулюя Міністерства освіти і науки України. Захист відбувся “7” липня 2015 р. об 11 годині на засіданні спеціалізованої вченої ради Д 58.052.02 у Тернопільському національному технічному університеті імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56, аудиторія 79. З дисертацією можна ознайомитись у бібліотеці Тернопільського національного технічного університету імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56.<br>Дисертаційна робота присвячена важливій науково-технічній проблемі, яка полягає в розробленні методів проектування й розрахунку конструктивних і технологічних параметрів робочих органів сільськогосподарських машин, що дасть змогу найефективніше транспортувати сипку сільськогосподарську продукцію. На основі механіко-математичних методів, а також структурного синтезу транспортно-технологічних механізмів сільськогосподарських машин з розширеними технологічними можливостями розроблено морфологічну модель, яка представлена у вигляді морфологічних матриць, що утворюються шляхом числового визначення відповідних альтернатив морфологічної таблиці, з проведенням якісного оцінювання кожного з варіантів транспортно-технологічних механізмів із розширеними технологічними можливостями за трьома параметрами: продуктивністю, якістю виконання процесу та мінімальною собівартістю виготовлення й експлуатації. Розроблено математичні та динамічні моделі технологічних процесів роботи транспортно-технологічних механізмів неперервної дії сільськогосподарських машин із визначенням кінематично-конструктивних і силових чинників. Зокрема розроблено математичні моделі динамічного процесу переміщення сипкого середовища в циліндричних трубах по криволінійних трасах за допомогою скребкового канатного робочого органу у вигляді системи пружних одновимірних тіл, які безвідривно переміщують сипке середовище по криволінійних траєкторіях, що описують динаміку горизонтальних та вертикальної віток робочого органу транспортера. Розроблено теорію динамічного процесу у вітках транспортера й побудови розв’язку вказаних нелінійних крайових задач, що дозволяє отримати рівняння у стандартному вигляді, які визначають вплив основних зовнішніх та внутрішніх чинників на визначальні параметри динамічного процесу робочого органу. Проведено комплекс експериментальних досліджень для встановлення функціонально-експлуатаційних характеристик розроблених скребкових трубчастих та гвинтових транспортно-технологічних механізмів із використанням розробленого стендового обладнання, в якому використовувався автоматизований привод з перетворювачем частоти і персональним комп’ютером з відповідним програмним забезпеченням.<br>Диссертация посвящена важной научно-технической проблеме, которая заключается в разработке методов проектирования и расчета конструктивных и технологических параметров рабочих органов сельскохозяйственных машин, что позволит наиболее эффективно транспортировать сыпучую сельскохозяйственную продукцию. На основе механико-математических методов, а также структурного синтеза транспортно-технологических механизмов сельскохозяйственных машин с расширенными технологическими возможностями разработана морфологическая модель, представлена в виде морфологических матриц. Они образуются путем числового определения подходящих альтернатив морфологической таблицы, с проведением качественной оценки каждого из вариантов транспортно-технологических механизмов с расширенными технологическими возможностями по трем параметрам: производительности, качеству выполнения процесса и минимальной себестоимости изготовления и эксплуатации. Разработаны математические и динамические модели технологических процессов работы транспортно-технологических механизмов непрерывного действия сельскохозяйственных машин с определением кинематически-конструктивных и силовых факторов. В частности, разработаны математические модели динамического процесса перемещения сыпучей среды в цилиндрических трубах по криволинейным трассам с помощью скребкового канатного рабочего органа в виде системы упругих одномерных тел, которые безотрывно перемещают сыпучую среду по криволинейным траекториям, которые описывают динамику горизонтальных и вертикальной веток рабочего органа транспортера. Разработана теория динамического процесса в ветках транспортера и построения решения указанных нелинейных краевых задач позволяет получить уравнения в стандартном виде, которые определяют влияние основных внешних и внутренних факторов на определяющие параметры динамического процесса рабочего органа. Исследовано влияние стохастичности размерных параметров тягово-пластинчатых безвтулковых цепей сельскохозяйственного оборудования усовершенствованной конструкции, предложено неравномерность нагрузки пластин внутренних и внешних звеньев оценивать вероятным коэффициентом, для которого определены минимальные и максимальные значения. Полученные зависимости, характеризующие кинематические и энергосиловые параметры процесса работы быстроходного винтового гофрированного транспортера-смесителя при перемещении груза, что улучшает условия смешивания сыпучих грузов. Проведен комплекс экспериментальных исследований для установления функционально-эксплуатационных характеристик разработанных скребковых трубчатых и винтовых транспортно-технологических механизмов с использованием разработанного стендового оборудования, в котором использовался автоматизированный привод с преобразователем частоты и персональным компьютером с соответствующим программным обеспечением.<br>The thesis covers an important scientific and engineering issue dealing with developing design and estimation methods of structural and technological parameters of agricultural machines tools making the most effective transportation of granular agricultural products possible. A morphological model based on both mechanical and mathematical methods and type synthesis of transportation- technological mechanisms of agricultural machines with technological expandability has been developed. The model is presented in the form of morphological matrices, obtained by numerical procedure of the certain choices of morphological table. The estimation of each transportation- technological mechanisms version with expended engineering capabilities according to three parameters (capacity, process performance quality, minimum manufacture and operation cost) has been made. Mathematical and dynamic models of technological operation processes of continuous transportation- technological facilities of agricultural machines have been developed. Kinematic - structural and power factors have been determined, in particular. Mathematical models of dynamic process of granular medium transportation in cylindrical tubes on curved paths by a rope scraper in the form of a system of elastic one-dimensional bodies, constantly transporting the medium on the curved trajectories, describing the dynamics of the transporting tool horizontal and vertical runs have been developed. The theory of dynamic process in the transporter runs and solution construction of the given non- linear boundary value problems has been proposed. This theory enables to obtain standard equations determining the influence of main inner and outer factors on the key parameters of the tool dynamic process. A number of experiments for determining the functional and operational characteristics of the developed scraping tube and screw transportation- technological facilities using the developed stand automatic-driven equipment with frequency converter and PC with necessary software have been made.

APA, Harvard, Vancouver, ISO, and other styles

43

Rusínová, Alena. "Tělocvična Třebíč - vybraná část STP." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225431.

Full text

Abstract:

The tesis is focused on building a new elementary school gym Třebíč, Horka-Domky, Václavské nám. 44/12. In addition to the new building itself is considered a gym and the construction of the connecting neck between the existing elementary school building andnew construction including reconstruction of the gym space newly connected corridor. Solves problems of selected parts of the building and technological project, which are: technical report, coordination situation, the financial plan of the building, site equipment oftechnological stages, a stage of construction schedule and itemized, use machines, technological regulations mounted skeleton and sports flooring, inspection and test plan, budget construction and plan for safety and health at work.

APA, Harvard, Vancouver, ISO, and other styles

44

Ševčík, Jan. "Polyfunkční komplex - Houbalova - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240422.

Full text

Abstract:

The subject of this thesis is the solution of building technology project poly-functional complex with a focus on execution of construction. Gross building is designed reinforced concrete skeleton combined with masonry. Technology will be developed Code for reinforced concrete monolithic frame and masonry. On the techno-logical stage it will be processed inspection and test plan and the balance of the major sources for the implementation of reinforced concrete structures 1.NP. The thesis is a proposal for construction site, which is complemented by a social facilities and offices. For an overall view of the construction of a multifunctional complex is processed time and financial plan, which will be further elaborated for building construction B. Availability of supply is verified by the design of routes. Like other task will be processed proposal formwork system for con-struction 1.NP Building B.

APA, Harvard, Vancouver, ISO, and other styles

45

Touška, Marek. "Rekonstrukce plynovodu Viniční A v Brně - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265700.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Gajdoš, Filip. "Stavebně technologický projekt železobetonové haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227753.

Full text

Abstract:

In my diploma´s thesis I occupy with selected parts of the technological prepariation of building proceses of administrative and production hall in Holešov. There are detailed follow up the technological rules for ground work and foundation. Furthermore , the technological requirements for reinforced concrate assembled skeleton. My diploma´s thesis also includes the project of the construction site facilities, machinery, construction budget, the technology solution including CTP, the time and financial planning, noise studies, fire safety of the building, evaluation of roof cladding.

APA, Harvard, Vancouver, ISO, and other styles

47

Balčík, Michal. "Sídlo firmy MEgA - příprava a organizace výstavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225404.

Full text

Abstract:

The object of the diploma thesis is a preparing and organization scheme of residence company MEgA. The thesis deals with facilities of a bulding site, safety devices and safety measures at work, control and pilot plans, a design of the machinery, budget and schedule, risk at the work and specialization through earthwork main road.

APA, Harvard, Vancouver, ISO, and other styles

48

Schindler, Marek. "Stavebně technologický projekt výstavby dálničního nadjezdu a přeložky silnice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227440.

Full text

Abstract:

This Master’s thesis deals with a construction project and a technical solution of a realignment of a stretch of a road and a bridge construction, which converts this road over the motorway D47. The aim of the thesis, is to plan the construction works in a way that ensures that they are carried out in an optimal manner. The work concentrates on the solution of the site preparation and the characteristics of the surrounding conditions of the building site. Furthermore, it deals with the time and financial plan for the implementation of individual objects and the associated number of deployment of employees and machinery. The building works consist of two construction sites of the same importance, for the road this involves a study of major technological stages of implementation and a inspection and test plan of the road construction. For the bridge, it provides a processed itemized budget, schedule of work performed, technology standard and a plan for securing material resources.

APA, Harvard, Vancouver, ISO, and other styles

49

Romashkyn, Mykola. "Administrativní budova v Brně, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409942.

Full text

Abstract:

The subject of this diploma thesis is civil technical project of an administrative building in Brno. The work includes a technical report, a construction technology study, technological prescriptions, proposal of suitable machines and mechanisms required for construction and wider relationships of transport routes to construction site. It also includes control and test plans, a detailed timetable for the main building object, deployment plans for workers, major work machinery and mechanisms, an item budget and a construction site equipment project. Finally, there are drawings of boarding foundations and ceiling structures and a comparison of the two variants of the ceiling structures.

APA, Harvard, Vancouver, ISO, and other styles

50

Divácký, Petr. "Bytový dům, Brno ulice Bělohorská. Stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392172.

Full text

Abstract:

The subject of this diploma thesis is construction-technological preparation of a residential building in Julianov. It includes a technical report on building structures, a construction technology study, a technological prescription, a control and test plan, a site equipment design, a design of a machine set, an item budget, a timetable, and a design for the implementation of paved areas.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!