Log in

Relevant bibliographies by topics / Technological posture / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Technological posture.

Dissertations / Theses on the topic 'Technological posture'

Author: Grafiati

Published: 3 June 2025

Last updated: 20 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Technological posture.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

SILVESTRE, BRUNO DOS SANTOS. "OIL AND GAS INDUSTRIAL CLUSTER IN THE CAMPOS BASIN PRODUCTIVE REGION: KNOWLEDGE LINKAGES AND TECHNOLOGICAL POSTURE OF THE FIRMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2006. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=8543@1.

Full text

Abstract:

COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>O objetivo central desta tese é investigar a aglomeração industrial de petróleo e gás da região produtora da Bacia de Campos (BC) e a possibilidade desta concentração geográfica de firmas, independente de suas diversas nomenclaturas (cluster, milieu, redes, distritos industriais, arranjos, sistemas locais, entre outras), consistir em fator que contribui para as atividades inovadoras das empresas ali situadas. Os fundamentos desta pesquisa baseiam-se em duas vertentes distintas: uma vertente teórica e uma vertente empírica.

APA, Harvard, Vancouver, ISO, and other styles

2

Dobeš, Jan. "Detailní projektování technologického pracoviště ve společnosti MEDIA EFEKT, s.r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241839.

Full text

Abstract:

This thesis deals with design in the company MEDIA EFEKT. The first part describes current status of the production hall. Further work is focused on three variants of methods of manufacturing distribution body. The second part is focused on optimizing of workplaces with regard to safety factors, including noise and lighting. It also shows the techno-economic evaluation.

APA, Harvard, Vancouver, ISO, and other styles

3

Balhar, David. "Technologická příprava výroby stírací desky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378858.

Full text

Abstract:

The main aim of this master's thesis is to propose a technological preparation of the wiping plate production. Elaboration is divided into four chapters. The first chapter describes forming tool (function and construction). In the second chapter is technologies overview, which are used for the wiping plate production. The most important is the third chapter, because it deals with the main output, and the actual proposal of technological preparation of the production. In the fourth chapter, production is reviewed economically.

APA, Harvard, Vancouver, ISO, and other styles

4

Jakub, Miroslav. "Technologické postupy pájení pouzder QFN." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221072.

Full text

Abstract:

This master´s thesis deals with QFN packages soldering and technology procedures optimization. The aim of theoretical part is description of QFN packages, their assembly and reflow soldering on PCB in HONEYWELL. The aim of the practical part is to propose a method of measuring temperature and optimizing the thermal profiles of selected PCB with QFN packages by using convection (HONEYWELL) and infrared (BUT) reflow ovens. Comparison and evaluation of thermal profiles for 3 production PCBś with QFN packages using solder paste AIM NC257-2 were realised. The main part of master´s thesis are appear

APA, Harvard, Vancouver, ISO, and other styles

5

Šeniglová, Hana. "Analýza procesu výroby čerpadel, návrh a optimalizace nového postupu ve firmě Antreg, a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241697.

Full text

Abstract:

This master’s thesis deals with the process of production of oil pump at the company Antreg, a.s. The purpose of the thesis was to design a new technological process without grinding. The goal was achieved by an experiment. The necessary measurements were taken on the front part of the oil pump box. Measurements are described and evaluated in this thesis. As a next step, optimal technological process was applied to other parts of the oil pump box. An economic evaluation was carried out for a selected technical process.

APA, Harvard, Vancouver, ISO, and other styles

6

Musil, Jan. "Návrh podpůrných aplikací pro tvorbu technologických postupů hřídelových součástí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229342.

Full text

Abstract:

This diploma thesis is deal with problems of supporting applications for technologic process creation of shaft parts. Thesis contains a description of the problem of technological processes, shaft parts and supporting applications for technological pro-cesses creation of technologic process. It is also described their proposed applications, and its possible cooperation with existing systems.

APA, Harvard, Vancouver, ISO, and other styles

7

Fucsek, Tomáš. "Převedení výroby z linky Debako na obráběcí centrum Makina A71." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228212.

Full text

Abstract:

This diploma thesis is engaged with innovation technology of production machine parts from current production line Debako to the new machining centre Makino A71, which includes the change of technologic process, the tool equipment, creation of CNC program, economical analysis and so on.

APA, Harvard, Vancouver, ISO, and other styles

8

Prokop, Tomáš. "Návrh výroby součásti "dolní válec" pro firmu ŽĎAS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231396.

Full text

Abstract:

This diploma thesis deals with a production process lower roller, this is a main part of oblique cylindrical straightening machines in the company Žďas a. s. Žďár nad Sázavou. The first part of the thesis is focused on kinds of cylindrical straightening machines and on processing of bar stock and tubes. Next is the thesis dedicated to the production of the main part of the lower oblique cylindrical roller straightening machines. The production takes place on an older turning machine Škoda Plzeň SR1000/5000. In the following part of the thesis is solved the possibility of using new technologies

APA, Harvard, Vancouver, ISO, and other styles

9

Duda, Tomáš. "Návrh technologie výroby upínače pro lisování plastů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399289.

Full text

Abstract:

The diploma thesis convey the information about the creation of technological procedures leading to the optimal way of repairing damaged parts of the fixture and creating production procedures for the production of new parts of the assembly. The theoretical part is focused on the analysis of the issue, determination of material of damaged parts for future production and designed semi-finished product. Furthermore, the technology of production from the point of view of used technologies is discussed. This includes a description of the tool materials. The practical part of the thesis is focused

APA, Harvard, Vancouver, ISO, and other styles

10

Wiecková, Kateřina. "Návrh technologického postupu montáže světelného LED zdroje na reflektor světlometu automobilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432828.

Full text

Abstract:

Cílem této práce bylo analyzovat současnou situaci technologického procesu montáže LED zdroje na světlomet automobilu a nalézt a navrhnout řešení ke snížení počtu výpadků ve výrobě. Technologický proces montáže zahrnuje umístění a upevnění LED zdroje (s interním označením „F-LUX“) na reflektor. Sestava musí splňovat požadovaný optický výstup a sériový takt linky. Na základě analýzy technologického procesu jsou navrženy optimalizace.

APA, Harvard, Vancouver, ISO, and other styles

11

Hamáček, Petr. "Technologický postup výroby implantátu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-433600.

Full text

Abstract:

This diploma thesis deals with the technological process of production of a short reconstruction nail, which is used in fractures of the femoral neck. It is located between the hip joint and the femur. The work deals with the analysis of the problems from the point of view of medicine, developmental stages of the implant, materials used for the production of reconstruction nails and a description of individual technologies of nail production.

APA, Harvard, Vancouver, ISO, and other styles

12

Paseka, Petr. "Výroba rotační součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241659.

Full text

Abstract:

The master thesis is about creating technological process of production of a rotational part. The specified part is crankshaft and it is a new contract in manufacturing company. The goal is to design a CNC technology and verify the technology in production. There are used turning, milling and drilling methods in the machining process. There is a hexagon presssed in to the part, which requires a special preparation. Production requires the involvement of co-operation for nitriding surface treatment of the shaft. In the end a selling price is determined.

APA, Harvard, Vancouver, ISO, and other styles

13

Drmela, Radim. "Aplikace elektroerozivního obrábění v kombinaci s frézováním." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241944.

Full text

Abstract:

The diploma thesis is notionally divided into three parts. The first literature search part deals with the electronic discharge machining. The second main part solves the problem of machining plungers (movable part of the injection mold). This part also includes a technological process including production instruction cards. There are also calculated costs of production for this diploma part. The last part compares applications of electronic discharge machining technology with applications of milling technology.

APA, Harvard, Vancouver, ISO, and other styles

14

Krčálová, Žaneta. "Návrh postupu analýzy rizik v projektech technologické přípravy slévárenské výroby." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382708.

Full text

Abstract:

The author of this diploma thesis deals with the Proposal of a Risk Analysis Procedure in Technological Preparation for Foundry. Risk management is not currently applied in much detail at this present time. Analysis of the present risk management process in serial and prototype model tools will lead to the identification of risks within this discussion. It is then proposed for corrective actions for improvement of managing the current status to be presented and discussed. Target of this thesis is therefore the proposal of an updated risk analysis procedure in technological preparation for foun

APA, Harvard, Vancouver, ISO, and other styles

15

Motl, Martin. "Možnosti systému Sinumerik 840D při soustružení hřídele pro JAWA 23." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317190.

Full text

Abstract:

This Master’s thesis deals with the proposal manufacturing technology of a shaft with gears on a CNC machine tool. The first part of the thesis is focused on the concise description selected shaft and its use. In the next part of the thesis are state selected materials, which are suitable used for shafts and gears. After that is create drawing component, suggest technological procedure, tool list and machine list which are suitable used for manufacturing selected shaft. In the final part of the thesis is create a CNC program for manufacturing the shaft on the turning and milling machine. Progr

APA, Harvard, Vancouver, ISO, and other styles

16

Duda, Jan. "Návrh inovace výroby patního hřebového implantátu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378869.

Full text

Abstract:

This diploma thesis is focused on designing innovation of manufacturing calcaneal nail C-NAIL. The thesis contains analysis of technological processes of current manufacturing. There is also information about materials which are used for the manufactory. Finally, the thesis contains a designed technological process for manufacturing calcaneal nail C-NAIL.

APA, Harvard, Vancouver, ISO, and other styles

17

Novák, Lukáš. "Návrh technologie výroby zadané součásti pro podmínky školní dílny ÚST FSI VUT v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230986.

Full text

Abstract:

Diploma thesis deals with design and implementation of manufacturing technology of a part which was given by company Frentech Aerospace s.r.o. Manufacturing technology is prepared for conditions of workshop of Department of Machining FME Brno UT (laboratory C2). Acquired knowledges are used for design of innovative manufacturing technology with cutting tools from company Pramet Tools, s.r.o. Manufacturing technologies of gained part are designed for alloy blank EN AW 6082. Technical-economical assessment of all manufacturing technologies is part of this thesis. Both of manufacturing technologi

APA, Harvard, Vancouver, ISO, and other styles

18

Matějíčková, Eva. "Zakázkový projekt na zdvihací zařízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432628.

Full text

Abstract:

The aim of this thesis is to design and manufacture a lifting device to the Volkswagen Crafter long vehicle. In the first part, I present a simple descriptive overview of different lifting devices based on their principle and use. Next, commercially available alternative solutions to the given problem are shown and discussed. The main goals of the practical part are the design of the lifting device that fits to a carriage van according to given specifications and the description of the technological processes for the manufacturing of individual components of the device. The design includes sel

APA, Harvard, Vancouver, ISO, and other styles

19

Mecová, Kamila. "Návrh výroby nosiče čepele stroje MRZ / Messerringzerspaner." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402557.

Full text

Abstract:

The aim of the thesis is focused on the proposal of a new technological procedure of the blade carrier for use in its own production. Currently, the carrier is manufactured by the German company B.Maier Zerkleinerungstechnik GmbH. The work includes several parts. The first part deals with the component itself, its function and importance, as well as its function in the assembly and the whole machine. In the next part the technological procedure of the blade carrier production is created. Fleet of machines including the necessary tools is also designed. In a separate chapter there is an economi

APA, Harvard, Vancouver, ISO, and other styles

20

Švec, Michal. "Zefektivnění výroby součásti z šicího stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417554.

Full text

Abstract:

The diploma thesis deals with the proposal of more effective production process of the feeder holder component in the company MINERVA BOSKOVICE, a.s. The first part of diploma thesis dedicated to the technologies which are used in the production of components. The second part deals with the analysis of the component and its current production process. The third part contains a proposal for a new production process, which contains a description of the machines used for production, a new jig, selected tools, mechanical calculations and technological method. The last part evaluates the current an

APA, Harvard, Vancouver, ISO, and other styles

21

Šprta, Pavel. "Využití CAM softwaru PowerMILL 2018 při obrábění páčky na motorku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399320.

Full text

Abstract:

This diploma thesis deals with designing of manufacturing process of motorcycle lever prototype using PowerMILL 2018. The research part of the thesis contains analysis of materials used in the production of motorcycle levers and the introduction into CAD/CAM systems. The practical part contains choice of material, fixtures, cutting tools and solution of NC program itself. Summary of used strategies follows and ecenomical evaluation is performed at the end of the thesis.

APA, Harvard, Vancouver, ISO, and other styles

22

Ryšavý, Radek. "Návrh obrábění součásti včetně její montáže." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402502.

Full text

Abstract:

This diploma thesis is focused on piece production of the component and its subsequent assembly. It is an interchangeable spindle head marked VA1 from the product portfolio of TOS KUŘIM - OS, a.s. The aims of the diploma thesis include the characteristics of the assigned component, the subsequent analysis of the current manufacturing and assembly process. In the price calculations chapter, the direct and indirect input costs for the part production are quantified. Proposals to improve production were presented to the company and offered for possible implementation.

APA, Harvard, Vancouver, ISO, and other styles

23

Cagášek, Tomáš. "Průběh zakázky firmou s využitím projektového řízení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228928.

Full text

Abstract:

GÁŠEK Tomáš: The order processing by firm with usage of project management The project laboured within the field of study with the name "Production tech-nology and industrial management" describes some versions of the potential job order's progress in the manufactory at the firm "Speciální strojírna, a.s.". A customer asks for the batch production of the casts, that he will be order step by step for working in regular intervals. The part of the customer's plan is the optimalization of the production and the press of the price, that should be lower after the finishing of the production technolo

APA, Harvard, Vancouver, ISO, and other styles

24

Paděra, Radek. "Zefektivnění výroby držáku jehelní tyče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241146.

Full text

Abstract:

This diploma thesis deals with the manufacturing of the needle bar holder for the company MINERVA BOSKOVICE, a.s. to propose the efficient production. The first part of diploma thesis is dedicated to the analysis of the technologies used for manufacturing the component. The second part of the thesis is focused on the analysis of the component and its current production. The third part suggests a design for a manufacturing process innovation containing the description of a new machine used for manufacturing, tool selection, technological process and mechanical calculations. The last part evalua

APA, Harvard, Vancouver, ISO, and other styles

25

Drbal, Jindřich. "Využití CAM softwaru PowerMILL 2018 při obrábění formy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378868.

Full text

Abstract:

The subject of submitted diploma thesis is complete structure of procedures necessary for the designing and subsequent production of forging dies for production of semi-finished connecting rods. The initial part deals with the design of forging die. Following part is consisted of materials used for production of this type of tools. Ensuing is proposal of tooling for machining of the die following with simulation of the milling processes.

APA, Harvard, Vancouver, ISO, and other styles

26

Zíka, Marek. "Návrh technologie výroby distančního kroužku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417112.

Full text

Abstract:

The diploma thesis deals with the design of a new technological process for the production of a spacer ring with a diameter of 212 mm in cooperation with the company Meopta – Optika, s.r.o. The production of this component according to the current process does not comply with the prescribed geometric tolerances of flatness of the face and radius runout with a tolerance field size of 0.005 mm. The work is a detailed analysis of the specified component and describes the current technological process, including the machines on which the spacer ring is manufactured. Based on the knowledge gained f

APA, Harvard, Vancouver, ISO, and other styles

27

Veselý, Libor. "Obnova hřídele vzduchotechnického soustrojí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318151.

Full text

Abstract:

The subject of this work is the repair of an air-handling unit. Possible causes of the problem are analyzed and multiple solutions are proposed. The first variant considers the refurbishment of the damaged component using thermal spray technology, including the choice of the best method. The second solution proposes the manufacture of a new part using machining in the environment of the company. This process requires an intermediate product to be made, and the choice of the correct machines from what the company has available, choice of the right tools and cutting conditions. The technical-eco

APA, Harvard, Vancouver, ISO, and other styles

28

Drmota, Josef. "Možnosti CAM softwaru PowerMILL 2018 při obrábění součástky do palné zbraně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378856.

Full text

Abstract:

The subject of this diploma thesis deals with possibilities of the CAM software PowerMILL 2018 for machining of a component for a firearm. The thesis consists of a research focused on the issue of combined firearms, the specification of the part the thesis deals with and the analysis of the materials used. The practical chapters solve component clamping, tool selection and subsequent elaboration of the NC programs. At the end of the thesis there is shown the simulation of machinig including collison control.

APA, Harvard, Vancouver, ISO, and other styles

29

Krško, Matúš. "Zajištění stavební jámy při výstavbě metra v úseku Dejvická - Motol." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226786.

Full text

Abstract:

Diploma thesis deals with design and assessment of bracing the excavation during the construction of subway in the route Dejvická – Motol. The introduction presents possible methods of bracing. The next part is design and assessment of the chosen option, which ensure this construction. It consists of considering of engineering-geological conditions, static design, technological process of building and construction plans.

APA, Harvard, Vancouver, ISO, and other styles

30

Měrka, Tibor. "Technologie výroby vřetena frézovací hlavy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378857.

Full text

Abstract:

The aim of the diploma thesis is a milling head spindle heat treatment and production technology of this part. The introductory section of the thesis covers tasks of milling head spindle and required properties. Also includes overview of most-known types of heat and chemical treatment and milling head spindle production technology process proposal, which presents in more detail nitrocarburizing process called ARCOR V. Experimental part of the thesis gives consideration as well to the liquid salt bath nitrocarburizing application on different material samples and assessment of nitrocarburized m

APA, Harvard, Vancouver, ISO, and other styles

31

Olejníček, Petr. "Implementace CAM softwaru SolidCAM do strojírenské firmy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417075.

Full text

Abstract:

This Masters thesis examines the production of a revolver frame and the implementation of a new CAM system for the manufacturing process. This thesis contain four parts. The first part is focused on the current manufacturing process. The second part of the thesis consists of a new proposal to use progressive rotary tools and elements of automation for inspection by the Equator Gauging System. The third part proposes a new manufacturing strategy for the revolver frame. At the end of the thesis, the production times of proposed and current technologies are compared.

APA, Harvard, Vancouver, ISO, and other styles

32

Hložek, Milan. "Obrábění odlitku převodovky na CNC stroji." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378980.

Full text

Abstract:

The master’s thesis focuses on the machining of a chosen gearbox on a CNC machine. The theoretical part deals with gearboxes in general and the aluminium alloy from which a selected gearbox is manufactured. In the practical part, the machining of the gearbox is proposed according to the corresponding drawing. Gradually suitable machines are selected, then depending on their limits, clamping devices are designed, next a set of tools is selected and an NC program is generated. The technological process of production is proposed and the basic production costs are calculated.

APA, Harvard, Vancouver, ISO, and other styles

33

Kudelás, Jaroslav. "Založení objektu v Hradci Králové." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227580.

Full text

Abstract:

The diploma thesis deals with foundations of a new learning and research center of the Charles University. Goal is economical and secure design of geotechnical structures. In this thesis, has been used less known technology of deep foundations. The author points to the diversity of utilization, such as sealing wall, anchored and unanchored sheeting, columns designed to influence tension and pressure. For the static calculation have been used programs Scia Engineer and Geo5 v19. Part of this thesis the technological process of technology of the soil improvement by DSM.

APA, Harvard, Vancouver, ISO, and other styles

34

Porwisz, Ondřej. "Víceúčelové sportovní středisko - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265398.

Full text

Abstract:

This Diploma thesis deal with a construction technological project of Multi-purpose sport center in Broumov. It contains compehesive section for the implementation of this structure as: Technical report, budget maintenance, the financial plan, the timetable, inspection and test plan, energy label of the bulding envelope.

APA, Harvard, Vancouver, ISO, and other styles

35

Šípková, Nela. "Organizace technické přípravy výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229088.

Full text

Abstract:

The main objective of this thesis was evaluated to existing activities in technical disposition of production. Based on lessons learned to recommend an appropriate information system and propose a methodology for implementation of the company. Design an information system is applied to the company NEDFORM Ltd., which is looking for an information system suitable for the technical dispositon of production. Proposal is based on the actual software and Hardware Company. Part of this work is design to a suitable supplier for the company.

APA, Harvard, Vancouver, ISO, and other styles

36

Dvořák, Jan. "Stavebně technologické řešení překladiště v Prostějově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226984.

Full text

Abstract:

Master thesis and building technology solutions transshipment point in Prostejov covers technological studies throughout the construction, distribution structures on buildings, machinery equipment, time and financial plan. Furthermore, the thesis further focuses on one main structures of the whole building, object transshipment point. On this construction project is further developed such documentation and other documents that complement and prescribe requirements for faster, easier, safer, better and more technologically correct implementation of this phase.

APA, Harvard, Vancouver, ISO, and other styles

37

Marek, Miroslav. "Stavebně technologický projekt "Kampus Brno - Bohunice"." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227554.

Full text

Abstract:

The subject of the Diploma thesis is the technological project of the university campus in Brno - Bohunice. The work includes a complex study of the realizacion of the main technological steps in the construction of buildings UKB, namely the A25 and A36. There is the technical report, technology processes steel bearing system and monolithic reinforced concrete structures. Inspection and test plan for addressing regulations, timetable of works, machine draft report, and occupational health and safety plan

APA, Harvard, Vancouver, ISO, and other styles

38

Uzel, Filip. "Rekonstrukce památkově chráněného objektu pozemního stavitelství - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226107.

Full text

Abstract:

Master`s thesis solves technological processes rehabilitation of masonry reconstruction historically protected building. Describes the restoration of masonry using the electroosmotic system and by using helical reinforcement masonry of reinforcement, then it is also in this master`s thesis time and financial plan, site facilities and complementary features.

APA, Harvard, Vancouver, ISO, and other styles

39

Blažek, David. "Stavebně technologického řešení Vzdělávacího komplexu v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225564.

Full text

Abstract:

This master’s thesis deals with construction of the gross building of new building of learning complex FEKT VUT in Brno. It contains the design of earthworks, underground setting piles, monolithic structures and isolation of the building for further construction. Construction and technological project includes technical report, time and financial plan of construction, study of the implementation of major technological stages of site preparation, budget of facilities, technological regulation to solved stages, inspection and test plan of monolithic structures, health and safety plan and energy

APA, Harvard, Vancouver, ISO, and other styles

40

Hromník, Lukáš. "Stavebně technologický projekt polyfunkčního bytového domu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226979.

Full text

Abstract:

Construction technological project of polyfunctional flat house SO 107, solves the realization of reinforced concrete monolithic ceiling construction the financial and time schedule, technological instruction of concreting, proposal of mechanization, the technical report of technology construction project. The proposal formwork system Multiflex.

APA, Harvard, Vancouver, ISO, and other styles

41

Zemánek, Miroslav. "Příprava realizace výrobní haly v Trutnově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372074.

Full text

Abstract:

This Diploma thesis deals with preparation for the production hall in Trutnov. The thesis handles technological prescriptions of micropiles, piles, casing panels BRUCHA Paneel. Thesis provides an insight into the inspection and testing plan of micropiles, the situation concerning broader transportation relations with traffic routes, itemized budget with land area, timetable, draft of major machines and mechanisms. Furthermore, the thesis contains drawing formwork of external extension, layout plan, details of the wall casing.

APA, Harvard, Vancouver, ISO, and other styles

42

Lech, Martin. "Obchodní centrum Holešov - stavebně technologická příprava." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226104.

Full text

Abstract:

This Master’s thesis deals with the building technological preparation of the building a shopping centre in Holešov. This thesis includes a technical report of building technological projekt, a technological prescription of montage a skeleton of hall with inspecting and testing plan and with a drawings of working procedure of montage, a technical report of building equipment with drawings, a plan of mechanical assembly with a timetable, a report of health and safety on the building site, a report of input of building on environment, description of transport relations with drawings, a timetable

APA, Harvard, Vancouver, ISO, and other styles

43

Schreiber, Jiří. "Bytový dům v Trutnově - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372163.

Full text

Abstract:

In my master´s thesis I am talking about solution of building a top rough construction technology in a block of flats. The content of my thesis are mainly worked out technical regulations concerning monolithic ceiling constructions and vertical load bearing constructions. Regarding the phase of the top rough construction, also there are a proposition of a building site organization, a technical report about the building site organization, a technical report about a building-technological project, solution of construction orgaization, a timetable, an item budget and a proposition of machine com

APA, Harvard, Vancouver, ISO, and other styles

44

Gregovský, Adam. "Stavebně technologický projekt víceúčelové sportovní haly Kojetín." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240406.

Full text

Abstract:

The solution of this Diploma thesis is a construction technological project of multipurpose sports hall Kojetín. It contains a comprehensive section for the implementation of this structure. Work in this technological project is included the following elements: inspection and test plan, technological standard, technical reports, the financial plan, the timetable, principles of organization development, budget, maintenance and service life, energy label of the building envelope.

APA, Harvard, Vancouver, ISO, and other styles

45

Bittnerová, Lucie. "Bolt Tower Dolní Vítkovice - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265548.

Full text

Abstract:

The diploma thesis is dealing with selected parts of construction technology project of extension Vysoká pec no. 1 in Ostrava – Vítkovice. This thesis contains detailed elaboration of technological specifications for the construction of structural steel superstructure. For this phase is treated with a draft of mechanical report, inspection and test plan, dealing with traffic routes and itemized budget. There is also processed a proposal of building equipment which is the same for the entire implementation extension of Vysoká pec, a situation of building equipment, technical report of the objec

APA, Harvard, Vancouver, ISO, and other styles

46

Keprt, Michal. "Svařování dílčí části Kaplanovy turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318730.

Full text

Abstract:

Aim of this work is description of design and manufacturing by welding technology of adjustable runner blades circle of Kaplan turbine. For designing and its subsequent strength control using the finite element method were performed with using static analysis in the program SolidWorks ® 2013. Material of adjustable runner blades circle's parts was designed S 355 J2 G3, which is able to withstand a given load. In the design of technology of welding there was elected MAG-welding method, with the active gas mixture Ar +18% CO2. Additive material for welding will be OK Autrod 12.51, like it‘s mark

APA, Harvard, Vancouver, ISO, and other styles

47

Tacina, Marek. "Stavebně technologický projekt rekonstrukce areálu bývalého mlýna v Židlochovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227313.

Full text

Abstract:

The subject of my thesis is to implement the gross carrying construction of the new bakery Karlovy pekarny in Židlochovice. In this paper dealt with the technical report, the situation of buildings, building equipment, budget, schedule, technological procedure of construction (bored piles and assembled skeleton), mechanical design and assembly KZP.

APA, Harvard, Vancouver, ISO, and other styles

48

Doubek, Rostislav. "Stavebně technologický projekt objektů skládky Úholičky." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227710.

Full text

Abstract:

In this diploma thesis two steel frame objects of a waste dump in Úholičky are solved. The aim is to resolve the chosen parts of a construction-technological project. The main topics for selected technological phases are transportation, bill of quantities, technological regulations, construction organization’s principles, time schedule, machinery, control and testing plan, work safety and worker’s health protection. These topics are prepared for the technological phases of ground works, fundamental contruction, upper load-bearing structure, construction of the floor and sheathing of the object

APA, Harvard, Vancouver, ISO, and other styles

49

Nevole, Jan. "Sportovní centrum Jihlava, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240359.

Full text

Abstract:

The aim of this final thesis is to design selected parts of construction technology project for building used as an sports centrum in Jihlava. The attachments provide a solution of upper structural work, with focusing on floor structure forms and staircase. The thesis contains the technological procedures for constructing both variants of floor structure and staircase, principles according to which is the construction organised, safety and health measures taken on the construction site, design of the mechanical assembly, time plan, plan of inspections and testing, controlling and testing plans

APA, Harvard, Vancouver, ISO, and other styles

50

Konečný, Petr. "Racionalizace technologie výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231504.

Full text

Abstract:

This thesis deals with the rationalization of production technology of selected component. The first part contains a brief introduction of the company NTS Prometal Machining s.r.o. and brief description of the product. The following section is an analysis of existing manufacturing technology. The practical part is focusing on the proposal of rationalization versions of the production process. After evaluation of all possible options of rationalization there has been developed a new technological process with a respect to time and cost savings. Finally there was carried out economical evaluatio

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!