Relevant bibliographies by topics / Technologie tváření

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Technologie tváření'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Technologie tváření.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Technologie tváření"

1

Kubíček, Lubomír. "Návrh technologie objemového tváření součásti jízdního kola za studena." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228275.

Full text
Abstract:
The diploma thesis is dealt with a project of a new manufacture method of a bicycle´s part. The part is a brake drum, which is the necessary part of a free-running charge. In an intro-duction of the diploma thesis is described a nowdays manufacture technology and its deficiencies. According to the nowdays manufacture technology was designed a new one, which is based on a cold volumetric shanking. The shanked hemihedron is consequently shaped according to the current technology. After the operation of cold shaping an instrument is projected. The project of the shaping technology is filled up by the calculation of the essential parameters, including an arrangement of the instrument and the process. An economical evaluation of the new process of the brake drum is stated and its advantages and disadvantaged were selected.
APA, Harvard, Vancouver, ISO, and other styles
2

Hrdlička, Martin. "Návrh technologie výroby čepu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417448.

Full text
Abstract:
The Master's thesis, written during the study of M-STM Manufacturing Technology and Management in Industry, is focused on the concept of the production technology of a pin. The thesis includes a description of forming and machining technology in terms of possibilities of their application in the production of the pin. Furthermore, by comparing both technologies and preliminary economic evaluations of production, it leads to the choice of the production method. This production method is then described, and the description contains the production process steps including the creation of the CNC program. The conclusion of the thesis is devoted to the technical and economic evaluation of the production concept.
APA, Harvard, Vancouver, ISO, and other styles
3

Bezděk, Jiří. "Technologie výroby tvarové součásti tvářením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228389.

Full text
Abstract:
Graduation theses project elaborated within the scope of full-time study with specialization 23037002 submits the proposal of manufacture technologies for irrregularly formed component with flange by surface forming. Material is made from rust-resistant metal plate 17240 with 1mm thickness. Expected annual serie is 50.000pcs. Based on literary pilot project for deep hauling dilemma and its calculations was proposed hauling in instrument with blankholder. The hauling operation is done using hydraulic presser ZH 50 with rated power of 500kN. The drawing instruments are made from tool steel 19573 and heat treated according design doccumentation. The proposal of drawing versions was verified by simulation program Pam-Stamp.
APA, Harvard, Vancouver, ISO, and other styles
4

Toman, Pavel. "Výroba součásti z plechu pomocí technologie HMT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228793.

Full text
Abstract:
This thesis submits a proposal production technology of single parts from sheet steel No. 11 305, thickness of 2 mm, made from a semi-finished product with a diameter of 246 mm, production run of 50 000 pieces per year. To manufacture the component a technology of hydromechanical drawing is proposed. On the basis of a literary study and calculations a drawing tool was designed, fixed in hydraulic press LPS 4000. To prepare a semi-finished product, flange trimming, and hole punching, a sheet metal cutting is used.
APA, Harvard, Vancouver, ISO, and other styles
5

Ocelík, Jakub. "Stroj pro hydroforming trubek z neželezných kovů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230238.

Full text
Abstract:
Master`s thesis deals with unusual high-pressure-fluid forming technology – hydroforming. There are discussed factors, which are affecting forming process, and there are made conclusion of it for machine design process. There is also made an evaluation of tube hydroforming technology in nowadays. The objective of thesis is to design new forming machine for tube hydroforming and for use in bicycle frames design. The machine is to be determined for manufacturing series up to 1000 pieces. Based on calculations and discussion of hydroforming technology, the best design solution is chosen. Machine is designed as modular conception with pressure multiplication of forming fluid right in die cavity. There is no need to use high pressure pump for forming fluid, used in common machines for tube hydroforming. This leads to cost reduction and so the objective of thesis is accomplished.
APA, Harvard, Vancouver, ISO, and other styles
6

Křivý, Drahoš. "Návrh technologie komplexní výroby součásti "Krytka PC skříně"." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229913.

Full text
Abstract:
The project, which was done within the scope of engineering’s study shows the proposal of new technology and production organization of a part “PC cover” – a piece done by deep drawing technology from steel sheet of material 11 321. The study shows some of production operations such as cutting, bending, drawing and shearing, included production method solving. In the project were solved also necessary technological calculations and constructional drafts of forming tool. The whole work covers a complex solution of problems related to production of PC cover together with technological disposition of workplace which represents effective layout, distribution and designing of workplace and machines, used for production of the part in a workshop
APA, Harvard, Vancouver, ISO, and other styles
7

Dolák, Martin. "Výroba části odpadní dráhy tiskařského stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382281.

Full text
Abstract:
Řešenou součástí je část kanálu pro odpadové odstřižky tiskařského stroje. Relativně jednoduchá součást vhodná k výrobě tvářením za studena. Diplomová práce navrhuje zhotovení komponenty lisováním. Po shrnutí základních teorií dále navrhuje varianty výroby. Pro vybranou sestavuje technologický postup a navrhuje kroky tváření. Návazně odvozuje návrh konstrukce postupového nástroje. V neposlední řadě se věnuje ekonomickému vyhodnocení výroby, ročnímu výrobnímu množství a vypočítává bod zvratu pro dané řešení.
APA, Harvard, Vancouver, ISO, and other styles
8

Spurný, Petr. "Technologie výroby výztuhy pro automobil." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228390.

Full text
Abstract:
The project, which have been created within the framework study of engineering branch N2301-2, submit technology project of presswork – car reinforcement from material H 220 P and concept of multi-tool set design for pressing operations 1, 2 and 3. Technology process was designed in six operations, based on literary study of blanking and drawing technology. Multi-tool set is design in according with transfer press Müller Weingarten 1250T-1, which was chosen on the basis of advantageousness calculation. Project includes technical and economical evaluation of elaborated technology whit two other variants of production.
APA, Harvard, Vancouver, ISO, and other styles
9

Pašalov, Tomáš. "Návrh technologie výroby bočnice skříně PC." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229912.

Full text
Abstract:
The project developed as a part of continuing master’s program in the field of M-STG Mechanical engineering technologies introduces a technological proposal of producing a side panel of computer case. Based on the research of published studies on the topic of surface forming and methods of production of shape openings in sheet-metal, we chose the variant of production of parts using punch press and press brake and selected appropriate material – steel with protective zinc and aluminum coating. Based on the research of published studies on the topic of computer cases we processed analyses of shape designs and chose optimal variant, for which we prepared calculations of production costs in comparison with other proposals.
APA, Harvard, Vancouver, ISO, and other styles
10

Bartusek, Břetislav. "Technologie výroby plechového dílu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230014.

Full text
Abstract:
The aim of diploma thesis is to design technology components production orders. For a given part of the technology will be used non conventional deep drawing Wheelon method. For manufacturing lengthwise recesses and consequent cutting of shaped holes using a plasma cutting. The suitability of technological applications will be tested using the cost functions.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Technologie tváření' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography