Log in

Relevant bibliographies by topics / Technology of CNC machining / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Technology of CNC machining.

Dissertations / Theses on the topic 'Technology of CNC machining'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Technology of CNC machining.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Safaieh, Mehrdad. "STEP-NC enabled cross-technology interoperability for CNC machining." Thesis, University of Bath, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.619222.

Full text

Abstract:

In recent decades there has been a rapid development of technology in manufacturing industries, in particular through the increasing use of ever more powerful and sophisticated Computer Numerical Controlled (CNC) machines to manufacture complex parts. These machines are supported by a chain of computer based software solutions amongst which manufacturing information is exchanged. With the need for information exchange, interoperability between various computer-aided systems (CAx) has become an important research area. In CNC part programing, innovations by various hardware manufacturers and th

APA, Harvard, Vancouver, ISO, and other styles

2

Hau, Chuan-Shou. "Perspectives of computerized numerical control (CNC) machinists on the tasks of CNC machining technology in Taiwan /." The Ohio State University, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487863429095404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kopcík, Daniel. "Technologie výroby tvarové součásti víceosým CNC obráběním." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232185.

Full text

Abstract:

The theoretical part of this thesis is introducing basic information in production of shaped components on CNC machines. It describes each steps from a design of the component to production. Main target is summarization of available modern technologies that can be used. Experimental part uses these modern technologies for processing design shaped component. It describes process of design 3D model part in CAD system, subsequently creation of program for machining in CAM system and solves production of part on CNC machine. The aim of this thesis is design part with interesting design and product

APA, Harvard, Vancouver, ISO, and other styles

4

Věrný, Luděk. "Technologie CNC výroby součástí z hliníkových slitin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229842.

Full text

Abstract:

This diploma thesis is elaborated on the specific assignment of AB Komponenty Ltd. The core of this thesis features the technology of manufacturing of component BASE CROSSBAR of aluminium alloy EN AW 2017 on the vertical machining center. CNC control program for the suggested technology is developed in the CAM software PowerMill 2010th. To complete the work it also includes a brief introduction to the issues and analysis of aluminum, aluminum alloys and coatings. From the perspective of the practice is probably the most beneficial and interesting final technical economic evaluation of selected

APA, Harvard, Vancouver, ISO, and other styles

5

Straka, Jiří. "Technologie výroby součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230015.

Full text

Abstract:

This diploma thesis is developed within my Master’s degree studies, branch mechanical engineering (M21 K), and specialization in M STM. The aim of this thesis is to solve the technology of mechanical production (machining, tooling) for the machine component called ‚shape lid‘. I execute the analysis of this technology from the perspective of the conventional machining process, and alternatively, some of the non conventional machining process, too. Conventional machining process is so far used for manufacturing of this sort of machine’s element. It‘s implying laborious work difficulties, even i

APA, Harvard, Vancouver, ISO, and other styles

6

Hoffman, Thomas H. "The Impact of eLearning on Computer Numerical Controls (CNC) Training in U.S. Manufacturing." University of Toledo / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1543920258249553.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Dlouhý, Vít. "Obrábění rotační součásti "těleso" na CNC soustruhu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417080.

Full text

Abstract:

This master's thesis is focused on the technology fundamentals of machining for the use of the CNC lathe which was used for machining the required parts are made of stainless steel. In the introduction are mentioned the historical milestones related to machine tools. In the following chapter is analyzed machining process and related fact. A follow-up chapter contains the parameters common to a modern machine tool CNC machines. Followed by the practical part with the characteristics of the machined components. The next chapter includes a selection of CNC lathe for production. Continued by selec

APA, Harvard, Vancouver, ISO, and other styles

8

Juráň, Jaromír. "Optimalizace technologie součásti "nosná deska" ve firmě PROMAT Vsetín." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228355.

Full text

Abstract:

Valorization and analysis of machining technology for the production of aluminium part and consecutively project optimization part production. New advanced cutting tools selection and application of new technologies. The adjustment and simplification of the existing NC program for given CNC machining centre and its final debugging. In the final part, there is an economical and technical evaluation of firm benefits and recommendations into production.

APA, Harvard, Vancouver, ISO, and other styles

9

Hulvej, Matúš. "Návrh výrobní technologie ozubeného hřídele převodovky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378867.

Full text

Abstract:

The diploma thesis presents a design of a technical project: design of production technology for a pinion shaft of a gearbox and design of alternative technology. It focuses on the analysis of a component, the selection of materials, machines and tools, and the creation of a manufacturing drawing and technological process of the production. It is concluded by a technical-economic evaluation, based on which are both designs compared and evaluated which design is better for specific conditions.

APA, Harvard, Vancouver, ISO, and other styles

10

Hrdlička, Martin. "Návrh technologie výroby čepu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417448.

Full text

Abstract:

The Master's thesis, written during the study of M-STM Manufacturing Technology and Management in Industry, is focused on the concept of the production technology of a pin. The thesis includes a description of forming and machining technology in terms of possibilities of their application in the production of the pin. Furthermore, by comparing both technologies and preliminary economic evaluations of production, it leads to the choice of the production method. This production method is then described, and the description contains the production process steps including the creation of the CNC p

APA, Harvard, Vancouver, ISO, and other styles

11

Trunda, Jiří. "Technologie výroby frézováním na CNC strojích." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228382.

Full text

Abstract:

Objective graduation theses, is determining and propound optimal alternate manufacturing section servant as base of electron microscope. As a production method is used chippy cutting on numerical controlled machine behind by the help of usage progressive cutting tools. To construction control program was use 3D CAD/CAM system of Solid Vision, Ltd. Corporation. Product working is complete project and procedure on manufacturing section, that is in finish well-founded technoeconomic evaluation.

APA, Harvard, Vancouver, ISO, and other styles

12

Nevařil, Jindřich. "Racionalizace výroby součásti v podniku Česká zbrojovka a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Caha, Tomáš. "Volba a optimalizace řezných podmínek pro progresivní výrobní technologie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231106.

Full text

Abstract:

This thesis contents theoretical description of methods for choosing and optimization of cutting conditions for progressive machining technologies. Especially it is concerned on CNC machining. The aim of experimental part of work is to set cutting conditions and simultaneously to achieve the most economical solution under current production conditions of the company. The product must also comply with required quality, roughness of the surface and geometrical precision.

APA, Harvard, Vancouver, ISO, and other styles

14

Pokladník, Robert. "Návrh technologie součásti alternátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229900.

Full text

Abstract:

This Diploma thesis deals with design technology of alternator claw pole. The technology is designed to achieve low production costs. The purpose is to prevent the transfer of manufacturing contract to countries with cheap manpower and low production costs. Technology design is done by selecting billets to the processing and economic evaluation. The dominant technology is a cutting operation that is performed on numerically controlled machines.

APA, Harvard, Vancouver, ISO, and other styles

15

Okáč, Petr. "Konstrukčně-výrobní řešení upínacího přípravku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231357.

Full text

Abstract:

The thesis deals with various aspects of the structure - manufacturing solutions fixture in terms of small manufacturing firm. In the thesis are discussed problems which the author of the thesis with small-scale production meets. A substantial part of the thesis is also made by comparation of the production of small series production and large series. Emphasis is placed on efficiency and economy of the entire production process.

APA, Harvard, Vancouver, ISO, and other styles

16

Ondrášek, Dušan. "Studie ekonomiky technologie obrábění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228041.

Full text

Abstract:

The aim of this diploma thesis addresses issues related to obtaining methodology for the production manager´s decision-making process in the field of technology selection, suitable tooling and cutting tools selection for a specific order or particular production plan. Evaluation of the manufacturing process while taking into consideration complexion of process controlling and contexture to the economy of this process. Analysis and evaluation of technological and economical aspects of a manufacturing process of the CNC chip machining in a real environment is targeted on the field of tooling, it

APA, Harvard, Vancouver, ISO, and other styles

17

Novák, Lukáš. "Návrh technologie výroby zadané součásti pro podmínky školní dílny ÚST FSI VUT v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230986.

Full text

Abstract:

Diploma thesis deals with design and implementation of manufacturing technology of a part which was given by company Frentech Aerospace s.r.o. Manufacturing technology is prepared for conditions of workshop of Department of Machining FME Brno UT (laboratory C2). Acquired knowledges are used for design of innovative manufacturing technology with cutting tools from company Pramet Tools, s.r.o. Manufacturing technologies of gained part are designed for alloy blank EN AW 6082. Technical-economical assessment of all manufacturing technologies is part of this thesis. Both of manufacturing technologi

APA, Harvard, Vancouver, ISO, and other styles

18

Pavliš, Jan. "Návrh technologie výroby zadané součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432687.

Full text

Abstract:

The thesis convey the information about creation of technology for the production of a part assigned by the company Frentech Aerospace s.r.o. The teoretical part is focused on analysis to problematic of machining. The practical part describes production of given part now and proposal new production plan also with tool management. The conclusion of thesis is devoted to economical evaluation of both production plans.

APA, Harvard, Vancouver, ISO, and other styles

19

Šebánek, Jan. "VYUŽITÍ 3D TECHNOLOGIÍ VE VEŘEJNÉM PROSTORU." Doctoral thesis, Vysoké učení technické v Brně. Fakulta výtvarných umění, 2016. http://www.nusl.cz/ntk/nusl-240509.

Full text

Abstract:

The aim of this thesis is to define the impact of rapid prototyping technology in terms of creative potential to use this technology represents a particularly sculpture and architecture. Rapid Prototyping is a generic term covering a range of technologies: 3D scan converting the already realistic three-dimensional objects in computer memory, parametric modeling, which creates three-dimensional objects based on the formative algorithms, photogrammetry method of compiling three-dimensional object from a photo, technology, 3D printing materializing after each layer objects transferred from the co

APA, Harvard, Vancouver, ISO, and other styles

20

Straka, David. "Návrh výrobní technologie desky upínače pásové pily." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-451204.

Full text

Abstract:

This thesis deals with the proposal of production technologies for a band saw clamp plate. Introduction of thesis is focused on problematics about selected component. In the next section, there are described technologies, which were used in the thesis. Practical part is about proposals of conventional and unconventional production methods. Methods are evaluated in the conclusion of thesis.

APA, Harvard, Vancouver, ISO, and other styles

21

Dvořák, Jakub. "Zdokonalení technologie výroby součásti typu příruba." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402564.

Full text

Abstract:

This diploma thesis focuses on improvement of the existing technology of the flange part in cooperation with the company Znojemské strojírny, s r.o. The theoretical part describes the technologies used in machining of the component. Subsequently, cutting materials and aluminum alloys are dealt with. A detailed analysis of the existing technology is performed in the practical part of the thesis followed by rationalization of the production process, which was carried out with respect to time and financial savings. A new technological procedure is developed after the improvement of the current pr

APA, Harvard, Vancouver, ISO, and other styles

22

Bílek, Josef. "Sestavení technologie součásti "skříň bezpřevodového výtahového stroje" pro TPV sériové výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229219.

Full text

Abstract:

This diploma work deals with a production technology of a casing for a gear-less elevator in a batch production. A technological analysis of the product is done, including two grades of materials for castings or weldments. The technology of machining includes a NC program. Both production variants have been assessed and the optimal production according to selected criteria is recommended.

APA, Harvard, Vancouver, ISO, and other styles

23

Konečný, Petr. "Racionalizace technologie výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231504.

Full text

Abstract:

This thesis deals with the rationalization of production technology of selected component. The first part contains a brief introduction of the company NTS Prometal Machining s.r.o. and brief description of the product. The following section is an analysis of existing manufacturing technology. The practical part is focusing on the proposal of rationalization versions of the production process. After evaluation of all possible options of rationalization there has been developed a new technological process with a respect to time and cost savings. Finally there was carried out economical evaluatio

APA, Harvard, Vancouver, ISO, and other styles

24

Beretta, Elisa Marangon. "Tecnologia assistiva : personalização em massa através do design e fabricação de assentos customizados para cadeiras de rodas." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2011. http://hdl.handle.net/10183/36349.

Full text

Abstract:

O design de assentos personalizados produzidos em espumas de poliuretano (PU) é uma opção para melhorar o conforto e o posicionamento das pessoas com deficiências que passam horas do dia sentadas na mesma posição. Estas superfícies de suporte aumentam a área de contato entre o assento e o usuário, o que melhora na distribuição do seu peso, diminuindo as pressões localizadas que geram problemas como úlceras de pressão. A grande maioria dos equipamentos destinados à produção destes assentos são dedicados, ou seja, especialmente desenvolvidos para este propósito, assim como suas ferramentas. Este

APA, Harvard, Vancouver, ISO, and other styles

25

Ahuett-Garza, Horacio. "Rapid prototyping based on CNC machining." Connect to resource, 1992. http://rave.ohiolink.edu/etdc/view.cgi?acc%5Fnum=osu1244133900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Shokrani, Chaharsooghi Alborz. "Cryogenic machining of titanium alloy." Thesis, University of Bath, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636532.

Full text

Abstract:

Materials which are both lighter and stronger have faced an increased demand over the past decades to fulfil the requirements across a range of industrial applications. More specifically, demands for titanium alloys have increased significantly due to its high strength to weight ratio which is particularly attractive for increasing fuel efficiency in aircrafts and cars and is also used in biomedical implants. Despite the increasing demand for titanium made products, machining titanium alloys remains a significant challenge. High material strength and hardness lead to excessive heat generation

APA, Harvard, Vancouver, ISO, and other styles

27

Imani, Asrai Reza. "Mechanistic modelling of energy consumption in CNC machining." Thesis, University of Bath, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.619215.

Full text

Abstract:

Consumption of energy is a key medium through which humans adversely affect their environment. Sustainable transition in the scale and composition of total primary energy demand in the 21st century is also a requirement for sustainable development of human civilisations in the face of diminishing resources of fossil fuels. One possible approach to reducing energy consumption is the energy efficient utilisation of existing energy consuming systems. This approach is less costly and time consuming than replacing the existing systems with new energy efficient ones. In addition to that, methods dev

APA, Harvard, Vancouver, ISO, and other styles

28

Kučera, David. "CNC obrábění rotační součásti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417437.

Full text

Abstract:

The diploma thesis concerns CNC machining of rotary part. The first part briefly introduces options of multipurpose CNC machines and robotized workplaces. The main body of the thesis analyses two production departments; one of them operated by a robotic manipulator. The conclusion summarises the accomplished results of the thesis.

APA, Harvard, Vancouver, ISO, and other styles

29

Lau, Pak Fai. "CNC machining accuracy enhancement by tool path compensation method /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?IEEM%202005%20LAU.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Vichare, Parag. "A novel methodology for modelling CNC machining system resources." Thesis, University of Bath, 2009. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.518102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Osman, Zahid Muhammed Nafis. "Computer Numerical Controlled (CNC) machining for Rapid Manufacturing Processes." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/16466.

Full text

Abstract:

The trends of rapid manufacturing (RM) have influenced numerous developments of technologies mainly in additive processes. However, the material compatibility and accuracy problems of additive techniques have limited the ability to manufacture end-user products. More established manufacturing methods such as Computer Numerical Controlled (CNC) machining can be adapted for RM under some circumstances. The use of a 3-axis CNC milling machine with an indexing device increases tool accessibility and overcomes most of the process constraints. However, more work is required to enhance the applicatio

APA, Harvard, Vancouver, ISO, and other styles

32

Kongiranda, Ganapathi Changappa, and Erappa Vivek Mandanna Balapanda. "Design Automation For CNC Machining : A case study for generating CNC codes from geometric CAD models." Thesis, Linköpings universitet, Maskinkonstruktion, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-178695.

Full text

Abstract:

The intent of the thesis is to automate the generation of computer numerical control (CNC) codes from geometrical computer-aided design (CAD) models. The work is carried out using two machines, the MDX 40A milling machine, and the HAAS VM3 machine. The case study is to determine the potential in automating the code generation process. The empirical findings from the research studies reveal that the manual process for programming the codes for the models pose a challenge of consuming more time using the procedures in computer-aided manufacturing and manual operations performed by a programmer.

APA, Harvard, Vancouver, ISO, and other styles

33

Kim, Taejung 1969. "Time-optimal CNC tool paths : a mathematical model of machining." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8861.

Full text

Abstract:

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2001.<br>Includes bibliographical references (p. 181-188).<br>Free-form surface machining is a fundamental but time-consuming process in modern manufacturing. The central question we ask in this thesis is how to reduce the time that it takes for a 5-axis CNC (Computer Numerical Control) milling machine to sweep an entire free-form surface in its finishing stage. We formulate a non-classical variational time-optimization problem defined on a 2-dimensional manifold subject to both equality and inequality cons

APA, Harvard, Vancouver, ISO, and other styles

34

Israeli, Gilad. "Software Simulation of Numerically Controlled Machining." Thesis, University of Waterloo, 2006. http://hdl.handle.net/10012/2921.

Full text

Abstract:

The field of numerically controlled (NC) machining has long been interested with predicting and measuring the errors in machining. Creating a simulation of NC machining is one way of achieving this. This thesis presents one such implementation of an NC simulation. It also runs a number of numerical and physical tests to verify the simulation?s correctness. The numerical tests show that the simulator work correctly as well as providing guide lines for appropriate simulation parameters. The physical tests show that the results of the simulation match the results of real NC machi

APA, Harvard, Vancouver, ISO, and other styles

35

Simoes, Jose Filipe Castanheira Pereira Antunes. "Advanced machining technologies in the ceramics industry." Thesis, Staffordshire University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343387.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Peng, Jie. "Design and analysis of a CNC system for machining and monitoring." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/29730.

Full text

Abstract:

The development of unmanned machining systems has been a recent focus of manufacturing research. Computer Numerical Control (CNC) units, which monitor and control many tightly coupled machining tasks, are inseparable parts of the unmanned manufacturing system. This thesis addresses the detailed design and analysis of a modular CNC system for a milling machine. The feed drive control system of the machine tool is thoroughly studied. The mathematical model for the feed drive control system, which consists of a motion controller, power amplifiers and DC-servo motors, is developed and experiment

APA, Harvard, Vancouver, ISO, and other styles

37

Hložek, Milan. "Obrábění odlitku převodovky na CNC stroji." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378980.

Full text

Abstract:

The master’s thesis focuses on the machining of a chosen gearbox on a CNC machine. The theoretical part deals with gearboxes in general and the aluminium alloy from which a selected gearbox is manufactured. In the practical part, the machining of the gearbox is proposed according to the corresponding drawing. Gradually suitable machines are selected, then depending on their limits, clamping devices are designed, next a set of tools is selected and an NC program is generated. The technological process of production is proposed and the basic production costs are calculated.

APA, Harvard, Vancouver, ISO, and other styles

38

Cherepanov, Maksym. "Ruční programovaní CNC strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317201.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Al-Samarrai, Ihsan. "Hybrid cooling/lubricating strategies for machining Ti-6Al-4V in CNC end milling." Thesis, University of Bath, 2018. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.767587.

Full text

Abstract:

Titanium and its alloys are widely used in various engineering applications such as aerospace, biomedical and chemical industries due to their excellent combination of high strength-to weight ratio and good creep, corrosion and fracture resistance. However, these desirable design properties pose a serious challenge to the manufacturing engineers owing to the high temperatures and stresses generated during the machining of titanium alloys. The extremely low thermal conductivity of titanium alloys results in concentration of high temperature close to the tool cutting edge resulting in accelerate

APA, Harvard, Vancouver, ISO, and other styles

40

Vinkler, Tomáš. "Aplikace CAD/CAM softwaru PowerMILL 6.0 při 3D obrábění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228540.

Full text

Abstract:

The diploma thesis contains detailed processing of a two-piece car form by means of possible accessible 3D strategies of CAM system PowerMILL, selecting of tools, economical evaluation and creation of NC program for CNC machining centre.

APA, Harvard, Vancouver, ISO, and other styles

41

Randeree, Kasim. "Development of an integrated laser - based tool inspection system for a CNC machining centre." Thesis, University of Hull, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301631.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Widiyarto, Muhammad Helmi Nur. "Modelling and passive correction investigation of vibration induced machining errors on CNC machine tools." Thesis, University of Huddersfield, 2006. http://eprints.hud.ac.uk/id/eprint/4748/.

Full text

Abstract:

Machine tool vibration is a complex subject requiring a multi-disciplinary approach involving the identification and analysis of the vibration sources and characteristics, as well as its direct and indirect effects. Machine tool vibration is influenced and can be characterised by the machine's structural dynamics, the drive system performance and the cutting force generation. Its effect materialises in the form of poor surface finish of the workpiece, accelerated cuttingtool wear, and chatter during the machining process. This research project investigates vibration-induced errors on a Cincinn

APA, Harvard, Vancouver, ISO, and other styles

43

Thompson, Michael Blaine. "Development of a Five-Axis Machining Algorithm in Flat End Mill Roughing." BYU ScholarsArchive, 2005. https://scholarsarchive.byu.edu/etd/320.

Full text

Abstract:

To further the research done in machining complex surfaces, Jensen [1993] developed an algorithm that matches the normal curvature at a point along the surface with the resultant radius formed by tilting a standard flat end mill. The algorithm called Curvature Matched Machining (CM2) is faster and more efficient than conventional three-axis machining [Jensen 1993, Simpson 1995 & Kitchen 1996]. Despite the successes of CM2 there are still many areas available for research. Consider the machining of a mold or die. The complex nature of a mold requires at least 20-30 weeks of lead time. Of those

APA, Harvard, Vancouver, ISO, and other styles

44

Ye, Xiaoyi. "CNC machine design for wheelchair users a case study of fadal vertical machining center 15 /." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24695.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Booysen, G., M. Truscott, D. Mosimanyane, and Beer D. De. "Combining additive fabrication and conventional machining technologies to develop a hybrid tooling approach." Interim : Interdisciplinary Journal, Vol 8, Issue 2: Central University of Technology Free State Bloemfontein, 2009. http://hdl.handle.net/11462/367.

Full text

Abstract:

Published Article<br>South Africa is constantly loosing contracts for the manufacturing of innovative projects to the East, due to its non-competitive mould-making industry. The paper will report on progress made in a specific focus area in mould-making, namely Hybrid Moulds for injection moulding. Hybrid Moulds refers to a hybrid between Additive Fabrication and conventional methods through the use of amongst others, Direct Metal Laser Sintering techniques, combined with conventional CNC machining (High Speed) techniques. Although the emphasis is on an economically viable process for limited

APA, Harvard, Vancouver, ISO, and other styles

46

Shimabukuro, Satoshi, Piero Diaz, and Leonardo Vinces. "Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability." Institute of Electrical and Electronics Engineers Inc, 2020. http://hdl.handle.net/10757/656633.

Full text

Abstract:

El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado.<br>This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axi

APA, Harvard, Vancouver, ISO, and other styles

47

Sádlo, Dominik. "Racionalizace obrábění skříní převodovek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417111.

Full text

Abstract:

Content of the thesis is the proposal of new technology using machining centres, including five controlled axis. Benefit of implementation the new nechnology is investigated at machining example, which is the gear housing of a single stage gearbox, manufactured in the company. In the first part of the thesis, the general properties of gearboxes and their housings are analyzed, as well as the procedure of the current proces of the machining representative. In practical part of the thesis is proposed necessary tool equipment and jig equipment, needed for machining of the part. After that are ana

APA, Harvard, Vancouver, ISO, and other styles

48

Kathiresan, Dhanush. "Study on Gun Drilling Technology in CNC Machining." Master's thesis, 2019. http://hdl.handle.net/10400.8/4665.

Full text

Abstract:

This document is the internship report of the Master in Product Design Engineering carried out at Tecnimoplás Lda. The company Tecnimoplás Lda is dedicated to manufacture of molds. They have an ability to make a small, medium and large size molds. Tecnimoplás is a company started in 1971 based in Marinha Grande, specialized in the service of mold. With this internship it was possible to get the industrial immersion that was the one of the objectives of the student for this stage. In the company after an initial inclosing, it was possible to develop work in the different equipment’s with diffe

APA, Harvard, Vancouver, ISO, and other styles

49

Yu, Wen Chen, and 陳譽文. "The Research on 5-axis CNC Surface Machining." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/25304312876006832978.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

LEE, LIEN-TSUN, and 李連村. "The Study of CNC Machining Performance Parameters Optimization." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/vk8278.

Full text

Abstract:

碩士<br>逢甲大學<br>機械與電腦輔助工程學系<br>105<br>Tool machining performance parameters have a very big impact on contour accuracy and processing time. At present only when a group of machine tool factory machining performance-related parameters to use for processing, so the best performer of the parameters are finishing factory settings, so processors for roughing and the second roughing, can not be shorter processing time to complete. This article is available for the relevant parameters Factory adjustment tools, the use of Taguchi experimental method selected time-related factors several key paramete

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!