Relevant bibliographies by topics / Technology of drilling

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Technology of drilling'

Author: Grafiati
Published: 4 June 2021
Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Technology of drilling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Technology of drilling"

1

RAHIM, E. A., S. SHARIF, Z. A. AHMAD, A. S. MOHRUNI, and I. A. SYED. "Machinability Investigation when Drilling Titanium Alloys(Drilling technology)." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.2 (2005): 553–57. http://dx.doi.org/10.1299/jsmelem.2005.2.553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Weatherl, Michael. "Technology Focus: Drilling Technology." Journal of Petroleum Technology 68, no. 02 (February 1, 2016): 58. http://dx.doi.org/10.2118/0216-0058-jpt.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gao, Wen Long. "Casing Drilling Technology to Drilling Site." Applied Mechanics and Materials 214 (November 2012): 63–66. http://dx.doi.org/10.4028/www.scientific.net/amm.214.63.

Full text
Abstract:
Oil development is an important industry of modern construction, for the entire socio-economic development of great significance. The continuous development of all regions of the oil used for exploration and drilling technology have given the stringent requirements, construction problems if the operation would cause serious consequences. Casing Drilling technology is the focus of the entire construction; this paper analyzes the use of technology in the drilling site, and put forward some reasonable proposals to raise the level of promotion of the construction site.
APA, Harvard, Vancouver, ISO, and other styles
4

Nishino, Takuya. "Underbalanced drilling technology." Journal of the Japanese Association for Petroleum Technology 62, no. 2 (1997): 165–71. http://dx.doi.org/10.3720/japt.62.165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nishino, Takuya. "Underbalanced drilling technology." Journal of the Japanese Association for Petroleum Technology 62, no. 5 (1997): 451–58. http://dx.doi.org/10.3720/japt.62.451.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

WANG, Li, and Takeshi TANAKA. "Analysis of Oil Mist and Compressed Air Volumes Required in MQL Drilling(Drilling technology)." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.2 (2005): 559–64. http://dx.doi.org/10.1299/jsmelem.2005.2.559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mensa-Wilmot, Graham. "Technology Focus: Bits and Bottomhole Assemblies (December 2020)." Journal of Petroleum Technology 72, no. 12 (December 1, 2020): 52. http://dx.doi.org/10.2118/1220-0052-jpt.

Full text
Abstract:
Achieving and sustaining performance drilling’s intended benefits - improved drilling efficiency with minimal down-hole tool failures and the associated reductions in project cycle time and operational costs - requires new protocols in drilling-system analysis. Drilling-system components [bits, reamers, bottomhole assemblies (BHAs), drive systems, drilling parameters, and hydraulics] must be analyzed independently for their relevance on the basis of application types and project challenges. Additionally, the drilling system must undergo holistic evaluations to establish functional compatibility and drilling-parameter responses and effects, considering project objectives and key performance indicators. This comprehensive physics-based approach ensures durability and rate-of-penetration (ROP) improvements without compromising stability and downhole tool reliability. The success of this process is strongly dependent on vibration control. Considering the different vibration modes - axial, torsional, lateral, stick/slip, and whirl - and their many dissimilar initiating and amplification factors, their sources always must be identified. Researchers have challenged the usual classification of erratic torque and revolution-rate behavior as stick/slip. BHA design and drilling-parameter ranges, considering blade spacing, can produce unfavorable tubular deformations, contact points, and side loads. This condition creates torque and revolution-rate fluctuations that have been linked to lateral vibrations. Awareness of these vibration modes, particularly their sources and intensifying conditions, ensures development of effective remediation solutions. Improved borehole quality, with regard to tortuosity and rugosity, must always be considered as a critical requirement in performance drilling. This condition reduces borehole drag, enhances drilling-parameter transfer, and improves ROP and overall run lengths. Most importantly, it reduces vibrations, leading to improvements in downhole tool life and directional drilling performance. In addition to formation drillability effects, drilling-systems components and operational practices have strong effects on borehole quality. Consequently, this must be part of the drilling-system analysis. The industry’s advancements at developing physics-based solutions for drilling challenges have matured. Continuing to ask questions that help us understand how and why we fail or succeed puts more wind beneath our wings to accelerate learning and reduce cycle times. Recommended additional reading at OnePetro: www.onepetro.org. SPE 200740 Digital Twins for Well Planning and Bit-Dull-Grade Prediction by Mehrdad Gharib Shirangi, Baker Hughes, et al. SPE 201616 Validating Bottomhole-Assembly Analysis Models With Real-Time Measurements for Improved Drilling Performance by Mark Smith, Premier Directional Drilling, et al. IADC/SPE 199658 Simulation and Measurement of High-Frequency Torsional Oscillation (HFTO)/High-Frequency Axial Oscillation and Downhole HFTO Mitigation: Knowledge Gains Continue by Using Embedded High-Frequency Drilling Dynamics Sensors by Junichi Sugiura, Sanvean Technologies, et al.
APA, Harvard, Vancouver, ISO, and other styles
8

Menand, Stephane. "Technology Focus: Drilling Technology (February 2009)." Journal of Petroleum Technology 61, no. 02 (February 1, 2009): 58. http://dx.doi.org/10.2118/0209-0058-jpt.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Menand, Stephane. "Technology Focus: Drilling Technology (February 2010)." Journal of Petroleum Technology 62, no. 02 (February 1, 2010): 40. http://dx.doi.org/10.2118/0210-0040-jpt.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Menand, Stephane. "Technology Focus: Drilling Technology (February 2011)." Journal of Petroleum Technology 63, no. 02 (February 1, 2011): 44. http://dx.doi.org/10.2118/0211-0044-jpt.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Technology of drilling"

1

Talus, Zachary David. "Aerospace automated drilling and fastening technology product selection framework." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122598.

Full text
Abstract:
Thesis: M.B.A., Massachusetts Institute of Technology, Sloan School of Management, 2019, In conjunction with the Leaders for Global Operations Program at MIT
Thesis: S.M., Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2019, In conjunction with the Leaders for Global Operations Program at MIT
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 65-67).
Ascent Aerospace is a global tooling and factory automation supplier for the Aerospace industry. Ascent's customers are typically introducing automation for the first time, or have already introduced automation to their production systems and are wary of its challenges. Choosing the appropriate technology is essential in ensuring successful implementation for both Ascent's customers and Ascent itself. Ascent has two different business units that produce equipment to automate the drilling and fastening of aerospace structures. These two units each come with vast product portfolios, and distinct approaches to address customer needs. This thesis focuses on an efficient method of evaluating how Ascent's current products align with customer's requirements, as well as identifying any technology gaps needing further exploration.
This thesis argues that Ascent's multiple business units are not currently equipped to advise their customers on investing in the appropriate technology for their production systems. To investigate such a vast solution space, a framework developed by the Systems Engineering Advancement Research Initiative (SEARI) at the Massachusetts Institute of Technology (MIT) is utilized called Multi-Attribute Tradespace Exploration (MATE). Using this framework, a software package called the Product Selection Tool, was developed to analyze how Ascent's product portfolio satisfies the customer's requirements for specific applications. The Product Selection Tool visualizes Ascent's 71 different product offerings on a single graph of utility versus cost per fastener.
The interface that displays the graph is dynamic, allowing Ascent's customers to adjust their requirements and preferences in real time, and visualize the sensitivity, or risk, of the recommended solution based on their specific requirements. This new approach allows Ascent to closely work with their customer in selecting a solution, identify areas of concern early on in the product selection process, and introduce cost-effective technology. This model can be applied to a variety of applications that have a vast solution space, reducing the complexity of understanding and communicating one's product line and/or capabilities.
by Zachary David Talus.
M.B.A.
S.M.
M.B.A. Massachusetts Institute of Technology, Sloan School of Management
S.M. Massachusetts Institute of Technology, Department of Aeronautics and Astronautics
APA, Harvard, Vancouver, ISO, and other styles
2

Kuo, Chun-Liang. "Drilling of Ti/CFRP/A1 multilayer stack materials." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5460/.

Full text
Abstract:
Multilayer metallic/composite stacks are increasingly being used in wing and tail plane sections of modern commercial aircraft, with component assembly primarily through mechanical joining, hence the requirement for fixation holes. Currently, the individual material sections (titanium, aluminium and CFRP) are machined independently prior to assembly however; there is growing demand within the industry to produce holes through the stack in a single operation. The research detailed in the thesis involves evaluating the effect of operating parameters, drill geometry, tool materials/coatings and cutting strategy when single shot drilling three-layer Ti/CFRP/Al stacks. Performance was assessed against various process measures including thrust forces/torque, hole accuracy/quality, tool wear/life, burr formation and hole surface integrity (microhardness and microstructure). Statistical design of experiments and associated analysis techniques (main effects plots, ANOVA etc.) were employed to identify the significance of variable factors and preferred operating levels with respect to different responses. Based on the experimental results, a bespoke drill design was formulated, which was validated against current commercially available drills recommended for the drilling of multilayer stacks. Finally, the influence of cutting fluid pressure on temperature and hole quality was investigated.
APA, Harvard, Vancouver, ISO, and other styles
3

Isaksson, Robert. "Drilling with force feedback." Thesis, Linköping University, Automatic Control, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-20897.

Full text
Abstract:

Industrial robots have been used for a long time in the industry. Despite this thedevelopment of advanced force control system using industrial robots is relativelylimited. Using force controlled robot systems expands the possibility of what canbe done with industrial robots.Previously a force feedback system for a standard industrial robot from ABBhas been developed. The system is developed towards the aircraft industry, where amounted drill machine on the robot has to fulfill the requirements in robot drillingin aircraft structures. This thesis presents experimental results and improvementsof this industrial robot system. Mechanical modifications and tests of a new endeffector are analyzed.

APA, Harvard, Vancouver, ISO, and other styles
4

Elieff, Brandee Anastacia Marie. "Top hole drilling with dual gradient technology to control shallow hazards." Texas A&M University, 2006. http://hdl.handle.net/1969.1/4441.

Full text
Abstract:
Currently the "Pump and Dump" method employed by Exploration and Production (E&P) companies in deepwater is simply not enough to control increasingly dangerous and unpredictable shallow hazards. "Pump and Dump" requires a heavy dependence on accurate seismic data to avoid shallow gas zones; the kick detection methods are slow and unreliable, which results in a need for visual kick detection; and it does not offer dynamic well control methods of managing shallow hazards such as methane hydrates, shallow gas and shallow water flows. These negative aspects of "Pump and Dump" are in addition to the environmental impact, high drilling fluid (mud) costs and limited mud options. Dual gradient technology offers a closed system, which improves drilling simply because the mud within the system is recycled. The amount of required mud is reduced, the variety of acceptable mud types is increased and chemical additives to the mud become an option. This closed system also offers more accurate and faster kick detection methods in addition to those that are already used in the "Pump and Dump" method. This closed system has the potential to prevent the formation of hydrates by adding hydrate inhibitors to the drilling mud. And more significantly, this system successfully controls dissociating methane hydrates, over pressured shallow gas zones and shallow water flows. Dual gradient technology improves deepwater drilling operations by removing fluid constraints and offering proactive well control over dissociating hydrates, shallow water flows and over pressured shallow gas zones. There are several clear advantages for dual gradient technology: economic, technical and significantly improved safety, which is achieved through superior well control.
APA, Harvard, Vancouver, ISO, and other styles
5

Danert, Kerstin. "Technology transfer for development : insights from the introduction of low cost water well drilling technology to Uganda." Thesis, Cranfield University, 2003. http://dspace.lib.cranfield.ac.uk/handle/1826/4464.

Full text
Abstract:
Third World development theory and practice are changing so rapidly that it is important to critically examine the fashions of today before they become history. This thesis considers the development, transfer, early adoption and sustainable use of technology, coupled with private sector participation in rural water supply provision. Improving water supplies for rural communities is one of the key challenges faced by development interventionists today. Lack of low cost, off the shelf technology for local enterprise which can provide affordable shallow wells for rural communities is one barrier to facilitating improvements. This thesis is based on research undertaken in Uganda to develop and transfer low cost water drilling technology in the context of decentralisation and privatisation policies. An extensive range of literature has been drawn together into 16 principles which guide technology transfer and development intervention. These principles are reexamined in the light of analysis of first hand experiences of undertaking a technology transfer project and interviews with stakeholders regarding their attitudes and perceptions. The research found that technology transfer is a cross-disciplinary and cross cultural process in which the linkages between the technology, context, individuals, organisations and beneficiaries need to be firmly established. Ugandan business and local Government culture plays a major role in facilitating successful technology uptake. Dealing with the risks associated with low cost groundwater technology is fundamental for its wider adoption. The process of technology transfer is important, particularly as high levels of stakeholder participation may compromise the delivery of outputs, at least in the short term. In terms of future challenges, this thesis shows that, culture, governance and equity need to be closely examined in relation to private sector participation in rural infrastructure provision. Private sector participation can conflict with community participation. How to adequately support innovation in Sub-Saharan Africa while harmonising development interventions is a challenge to the development community.
APA, Harvard, Vancouver, ISO, and other styles
6

Xie, Jing. "Models for filtration during drilling, completion and stimulation operations /." Full text (PDF) from UMI/Dissertation Abstracts International, 2001. http://wwwlib.umi.com/cr/utexas/fullcit?p3008475.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ajibose, Olusegun K. "Nonlinear dynamics and contact fracture mechanics of high frequency percussive drilling." Thesis, Available from the University of Aberdeen Library and Historic Collections Digital Resources, 2009. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?application=DIGITOOL-3&owner=resourcediscovery&custom_att_2=simple_viewer&pid=61011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Montgomery, Justin B. (Justin Bruce). "Characterizing shale gas and tight oil drilling and production performance variability." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/98600.

Full text
Abstract:
Thesis: S.M. in Technology and Policy, Massachusetts Institute of Technology, Engineering Systems Division, Technology and Policy Program, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 137-147).
Shale gas and tight oil are energy resources of growing importance to the U.S. and the world. The combination of horizontal drilling and hydraulic fracturing has enabled economically feasible production from these resources, leading to a surge in domestic oil and gas production. This is providing an economic boon and reducing reliance on foreign sources of energy in the U.S., but there are still a number of environmental, economic, and technical challenges that must be overcome to unlock the resource's full potential. One key challenge is understanding variability in individual well performance-in terms of both drilling time (a key driver of well cost) and well productivity-which has led to greater than anticipated economic risk associated with shale gas and tight oil development. Thus far, more reliable forecasting has remained elusive due to its prohibitive cost and the poorly understood nature of the resource. There is an opportunity to make use of available drilling and production data to improve the characterization of variability. For my analysis, I use publicly-available well production data and drilling reports from a development campaign. In order to characterize variability, I use a combination of graphical, statistical, and data analytics methods. For well productivity, I use probability plots to demonstrate a universality to the distribution shape, which can accurately be described as lognormal. Building on this distributional assumption, I demonstrate the utility of Bayesian statistical inference for improving estimates of the distribution parameters, which will allow companies to better anticipate resource variability and make better decisions under this uncertainty. For drilling, I characterize variability in operations by using approximate string matching to compare drilling activity sequences, leading to a metric for operational variability. Activity sequences become more similar over time, consistent with the notion of standardization. Finally, I investigate variability of drilling times as they progress along the learning curve, using probability plots again. I find some indication of lognormality, with implications for how learning in drilling should be measured and predicted. This thesis emphasizes the relevance of data analytics to characterizing performance variability across the spectrum in shale gas and tight oil. The findings also demonstrate the value of such an approach for identifying patterns of behavior, estimating future variability, and guiding development strategies.
by Justin B. Montgomery.
S.M. in Technology and Policy
APA, Harvard, Vancouver, ISO, and other styles
9

Zhu, Yaoxuan, and Xiaoting Huang. "IMPROVEMENT OF COMPACTED GRAPHITE IRON DRILLING OPERATIONS WITH CUSTOMIZED CUTTING FLUID." Thesis, KTH, Industriell produktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-226315.

Full text
Abstract:
With its higher strength, Compacted Graphite Iron (CGI) is widely used in automotive industry. However, the machinability of CGI is challenging, mostly due to the high temperature in the cutting zone and the higher cutting force. This paper studies the influence of the different cutting fluids on the machinability of CGI material in drilling operations. The investigation compared a few customized cutting fluids having alkaline phase and oil phase, to a conventional cutting fluid. The oil phase of customized cutting fluid can help reduce the friction force in the machining process. The flank wear measurements showed there is no significant difference among the fluids. The thrust force measurements, however, showed that the customized cutting fluids could effectively reduce the cutting force by nearly 20%. By using the customized cutting fluid, the machining of CGI materials could either use higher feed rate to reduce cycle time when keeping the cutting force same, or use the same process data while reducing energy consumption.
Inom bilindustrin används ofta kompaktgrafitjärn eftersom det har hög hållfasthet. Att bearbeta kompaktgrafitjärn är utmanade främst pga att det krävs hög temperatur och mycket kraft för att skära/borra materialet. I den här avhandlingen undersöks hur olika skärvätskor påverkar bearbetning av kompaktgrafitjärn under borrning. Skärvätskor där proportionerna mellan den alkaliska delen och oljedelen har anpassats, jämfördes mot traditionella emulsionsvätskor. Oljan i den kundanpassade skärvätskan kan hjälpa till att minska friktionskraften i bearbetningsoperationen. Fasförslitningsmätningen visade att det inte finns någon signifikant skillnad mellan skärvätskorna. Tryckraftsmätningarna visade emellertid att det kundanpassade skärvätskorna effektivt kunde reducera skärkraften med nästan 20%. Genom att använda de anpassade skärvätskorna kan man köra med högre mattningshastighet, reducera cykeltiden eller använda samma processparametrar men med mindre energianvändning.
APA, Harvard, Vancouver, ISO, and other styles
10

Teodoriu, Catalin [Verfasser]. "Contributions to drilling, completion and workover technology = Beiträge zur Bohr-, Komplettierungs- und Aufarbeitungstechnik / Catalin Teodoriu." Clausthal-Zellerfeld : Universitätsbibliothek Clausthal, 2012. http://d-nb.info/1023317222/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Technology of drilling"

1

Chugh, C. P. Manual of drilling technology. New Delhi: Oxonian Press PVT. Ltd., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Manual of drilling technology. Rotterdam: A.A. Balkema, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Talalay, Pavel G. Mechanical Ice Drilling Technology. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0560-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Talalay, Pavel G. Thermal Ice Drilling Technology. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-8848-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Drilling technology in nontechnical language. 2nd ed. Tulsa, Okla: PennWell Corp., 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aadnøy, Bernt Sigve. Advanced drilling and well technology. Edited by Society of Petroleum Engineers (U.S.). Richardson, TX: Society of Petroleum Engineers, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

American Society of Civil Engineers, ed. Spar platforms: Technology and analysis methods. Reston, Va: American Society of Civil Engineers, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guan, Zhichuan, Tinggen Chen, and Hualin Liao. Theory and Technology of Drilling Engineering. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9327-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Horizontal well technology. Tulsa, Okla: PennWell Pub. Co., 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

International Workshop on Ice Drilling Technology (4th 1993 Tokyo, Japan). Ice drilling technology: Proceedings of the Fourth International Workshop on Ice Drilling Technology, Tokyo, April 20-23, 1993. Tokyo: National Institute of Polar Research, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Technology of drilling"

1

Tschätsch, Heinz, and Anette Reichelt. "Drilling." In Applied Machining Technology, 105–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-01007-1_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Craig, Jonathan. "Drilling: History of Onshore Drilling and Technology." In Encyclopedia of Petroleum Geoscience, 1–16. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-02330-4_26-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guan, Zhichuan, Tinggen Chen, and Hualin Liao. "Drilling Fluids." In Theory and Technology of Drilling Engineering, 173–204. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9327-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Talalay, Pavel G. "Direct-Push Drilling." In Mechanical Ice Drilling Technology, 15–25. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0560-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vestavik, Ola M., and Erik Skaugen. "Abrasive Water-Jet Drilling." In Jet Cutting Technology, 389–402. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2678-6_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Jongheon, Jinkwang Kim, and Hyun Myung. "Embedded Drilling System Using Rotary-Percussion Drilling." In Robot Intelligence Technology and Applications 5, 213–19. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78452-6_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zou, Dingxiang. "Rock Drilling." In Theory and Technology of Rock Excavation for Civil Engineering, 49–103. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1989-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guan, Zhichuan, Tinggen Chen, and Hualin Liao. "Drilling Parameters Optimization." In Theory and Technology of Drilling Engineering, 205–60. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9327-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Talalay, Pavel G. "Introduction to Ice Drilling Technology." In Mechanical Ice Drilling Technology, 1–8. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0560-2_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Assaad, Fakhry A. "Drilling Technology in Petroleum Geology." In Field Methods for Petroleum Geologists, 25–40. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-78837-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Technology of drilling"

1

Millheim, K. K. "Advances in Drilling Technology and Where Drilling Technology Is Heading." In International Meeting on Petroleum Engineering. Society of Petroleum Engineers, 1986. http://dx.doi.org/10.2118/14070-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Eltayeb, May, Mohammad Reza Heydari, Muhammad Nasrumminallah, Michael Bugni, John Ernest Edwards, Mejdi Frigui, Imad Nadjeh, and Hilal Al Habsy. "Drilling Optimization Using New Directional Drilling Technology." In SPE/IADC Middle East Drilling Technology Conference and Exhibition. Society of Petroleum Engineers, 2011. http://dx.doi.org/10.2118/148462-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Prabowo, T. B. "Deepwater drilling solutions dual gradient drilling technology." In Indonesian Petroleum Association 42nd Annual Convention and Exhibition. Indonesian Petroleum Association, 2018. http://dx.doi.org/10.29118/ipa18.537.se.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Enger, Th, T. Torvund, and J. Mikkelsen. "Novel Drilling Technology and Reduction in Drilling Costs." In Offshore Technology Conference. Offshore Technology Conference, 1995. http://dx.doi.org/10.4043/7894-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Warren, Tommy, Robert Tessari, and Bruce Houtchens. "Casing Drilling with Retrievable Drilling Assemblies." In Offshore Technology Conference. Offshore Technology Conference, 2004. http://dx.doi.org/10.4043/16564-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chur, Claus, and Joachim Oppelt. "Vertical Drilling Technology: A Milestone in Directional Drilling." In SPE/IADC Drilling Conference. Society of Petroleum Engineers, 1993. http://dx.doi.org/10.2118/25759-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yadav, Anurag, Tammam Al-Tajar, and Anis Ali. "Drilling technology taking drilling operations to new frontiers." In SPE Bergen One Day Seminar. Society of Petroleum Engineers, 2014. http://dx.doi.org/10.2118/169209-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jellison, Michael J., Raymond Brett Chandler, Mike Payne, and Jeff Scott Shepard. "Ultra-Deep Drilling Pushes Drilling String Technology Innovations." In SPE Middle East Oil and Gas Show and Conference. Society of Petroleum Engineers, 2007. http://dx.doi.org/10.2118/104827-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rampersad, P. R., G. Hareland, and P. Boonyapaluk. "Drilling Optimization Using Drilling Data and Available Technology." In SPE Latin America/Caribbean Petroleum Engineering Conference. Society of Petroleum Engineers, 1994. http://dx.doi.org/10.2118/27034-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hannegan, D. M. "Methane Hydrate Drilling Technology." In Offshore Technology Conference. Offshore Technology Conference, 2005. http://dx.doi.org/10.4043/17448-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Technology of drilling"

1

Western Well Tool. Microhole Drilling Tractor Technology Development. Office of Scientific and Technical Information (OSTI), July 2007. http://dx.doi.org/10.2172/924767.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Williams, C. V., G. J. Lockwood, R. A. Normann, D. A. Myers, M. G. Gardner, T. Williamson, and J. Huffman. Environmental Measurement-While-Drilling System and Horizontal Directional Drilling Technology Demonstration, Hanford Site. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/8381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kolstad, George A., and John C. Rowley. Continental Scientific Drilling (CSD): Technology Barriers to Deep Drilling Studies in Thermal Regimes. Office of Scientific and Technical Information (OSTI), January 1987. http://dx.doi.org/10.2172/860866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Snyder, Neil K., Charles F. Visser, Eustes III W. Alfred, Walt Baker, Jordan Tucker, Ralph Quick, Taylor Nagle, et al. Geothermal Drilling and Completions: Petroleum Practices Technology Transfer. Office of Scientific and Technical Information (OSTI), January 2019. http://dx.doi.org/10.2172/1490999.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Su, Jiann, David Raymond, Somuri Prasad, and Dale Wolfer. Advanced Percussive Drilling Technology for Geothermal Exploration and Development. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1362127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pioneer Natural Resources. Beneficial Use of Drilling Waste - A Wetland Restoration Technology. Office of Scientific and Technical Information (OSTI), August 2000. http://dx.doi.org/10.2172/760020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pioneer Natural Resources. Beneficial Use of Drilling Waste - A Wetland Restoration Technology. Office of Scientific and Technical Information (OSTI), July 1999. http://dx.doi.org/10.2172/760021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Taylor, A. Continental drilling in Canada: drilling technology and borehole studies, comments on a meeting held October 23, 1985. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/315248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Veil, J. A., and M. B. Dusseault. Evaluation of slurry injection technology for management of drilling wastes. Office of Scientific and Technical Information (OSTI), February 2003. http://dx.doi.org/10.2172/819455.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fred Growcock. Enhanced Wellbore Stabilization and Reservoir Productivity with Aphron Drilling Fluid Technology. Office of Scientific and Technical Information (OSTI), December 2003. http://dx.doi.org/10.2172/896508.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Technology of drilling' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography