To see the other types of publications on this topic, follow the link: Tee joint.

Journal articles on the topic 'Tee joint'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Tee joint.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Dulieu-Barton, J. M., J. S. Earl, and R. A. Shenoi. "Determination of the stress distribution in foam-cored sandwich construction composite tee joints." Journal of Strain Analysis for Engineering Design 36, no. 6 (2001): 545–60. http://dx.doi.org/10.1243/0309324011514700.

Full text
Abstract:
The stresses in sandwich construction tee joints are determined using both experimental and numerical techniques. The features of interest in the tee joint are the use of a boundary angle laminate which reinforces the connection between the two component parts of the tee joint, the use of a fillet at the connection and the effect of any gap at the join. The experimental approach is thermoelastic stress analysis (TSA) based on the use of the SPATE (stress pattern analysis by thermal emissions) equipment. Techniques for calibrating the constituent parts of the joint are described so that quantit
APA, Harvard, Vancouver, ISO, and other styles
2

Lian, Weiqi, Zhiwei Sun, Yunrong Lyu, and Zhihong Duan. "Cause Analysis of Condensed Water Induced Bulging in High-Pressure Steam Tee Joints of a Pyrolyzer." Processes 11, no. 8 (2023): 2288. http://dx.doi.org/10.3390/pr11082288.

Full text
Abstract:
High-pressure steam pipes inevitably suffered from the reciprocal interaction of high pressure and temperature during a long-period service, causing deformation and cracking. However, only limited studies about abnormal bulging caused by condensed water have been carried out. To study the relationship between bulging and condensed water, bulging tee joints belonging to high-pressure steam pipes were investigated with a macro visual inspection, chemical composition analysis, and metallographic microscopy. According to the analysis of the bulging samples, pearlite spheroidization was found in th
APA, Harvard, Vancouver, ISO, and other styles
3

Gaines, Edward T. "Designing Partial-Penetration Tee Joints for Naval Ships." Journal of Ship Production 6, no. 01 (1990): 27–34. http://dx.doi.org/10.5957/jsp.1990.6.1.27.

Full text
Abstract:
This paper reviews development of weld design equations which can be used to analyze bevel partial-penetration tee joints. The method developed herein follows closely the development of equations for the design of square-edge partial-penetration tee joints which was presented at the 1986 Ship Production Symposium. For U.S. Navy ship design, technical authority is vested in the Naval Sea Systems Command (NAVSEA). The published NAVSEA design criteria for partial-penetration tee joints are so conservative that it is mathematically impossible to design a conventional, 100 percent efficient partial
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Sheng Yun, Ting Hao Cheng, and Yu Ting Lin. "The Application of Slip Joint Use in Space Frame Structure for Vehicle." Applied Mechanics and Materials 423-426 (September 2013): 1944–47. http://dx.doi.org/10.4028/www.scientific.net/amm.423-426.1944.

Full text
Abstract:
The purpose of this paper is to analysis the finite element model of joint methods for chassis space frames of vehicles. Common tee-joint often have poor control of dimensional accuracy. The analysis includes the common tee-joint and new joint method. Although the new joint method will increase in weight a little and easily adjust the accuracy of space frame, it will also improve the connection strength.
APA, Harvard, Vancouver, ISO, and other styles
5

Zheng, Xiang Feng, Yan Ting Feng, Xiao Guang Niu, et al. "Failure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Final Superheater Header." Advanced Materials Research 311-313 (August 2011): 615–18. http://dx.doi.org/10.4028/www.scientific.net/amr.311-313.615.

Full text
Abstract:
Through methods, such as microscope analysis, mechanical analysis, chemical analysis, metallographic examination, the causes resulting in tee joint crack of subcritical power station boiler final superheater header (12Cr1MoV) have been analyzed. The result indicates the tee joint crack is reheat crack, and irrational structure and excessive welding residual stress are the primary inducement of tube joint crack.
APA, Harvard, Vancouver, ISO, and other styles
6

Yukhimets, P. S., S. V. Kobelskii, and V. V. Filipenkov. "Cyclic Strength Of Damaged Tee Joint." Техническая диагностика и неразрушающий контроль 2015, no. 2 (2015): 34–38. http://dx.doi.org/10.15407/tdnk2015.02.06.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dawe, J. L., B. S. Pond, and G. Y. Grondin. "Interaction of shear and tension in welded truss connections." Canadian Journal of Civil Engineering 12, no. 1 (1985): 94–103. http://dx.doi.org/10.1139/l85-010.

Full text
Abstract:
In many truss joints consisting of double-angle web members welded to stems of inverted lower chord tee sections, adequate fillet weld lengths may be provided without the need for gusset plates. In such cases where a joint may also be subjected to high combinations of shear and tension, the possibility of overstressing of a tee stem exists. In the investigation of this problem, four analytical techniques, including two proposed herein, and experimental results of 30 full-scale specimen tests, 22 of which were conducted during the investigation presented herein, are presented and evaluated. Ana
APA, Harvard, Vancouver, ISO, and other styles
8

Doos, Qasim M., and Kamaal Sahib Makki. "Defects Analysis of Tee-Section Welding Using Friction Stir Welding Process of Aluminum." Journal of Engineering 20, no. 10 (2023): 120–29. http://dx.doi.org/10.31026/j.eng.2014.10.09.

Full text
Abstract:
Friction stir welding (FSW) of Tee-joints is obtained by inserting a specially designed rotating pin into the clamped blanks, through top plate (skin) to bottom plate (stringer), and then moving it along the joint, limiting the contact between the tool shoulder and the skin. The present work aims to investigate the defects occur for Tee-joint of an Aluminum alloy (Al 5456) with dimensions (180mm x 70mm) for the skin plate, (180mm x 30mm) for stringer plate and thickness of (4mm).The effects of welding parameters such as rotational speed, linear speed, plunging depth, tool tilting, and die radi
APA, Harvard, Vancouver, ISO, and other styles
9

Dai, Chunhui, Xingsheng Lao, Ping Song, Lie Chen, and Kelong Zhang. "Optimal Design of Three-way Joint Structure for Steam Pipeline of Offshore Floating Nuclear Power Plant." Journal of Physics: Conference Series 2085, no. 1 (2021): 012004. http://dx.doi.org/10.1088/1742-6596/2085/1/012004.

Full text
Abstract:
Abstract Offshore nuclear power plants have many advantages, but their small space determines that operators cannot work far away from the steam power generation system. In order to improve work comfort and reduce noise damage, this article has carried out optimization design work for the three-way joint of the steam pipeline. On the basis of the female model, a smooth numerical simulation of the three-way joint is carried out to show its internal flow field. On this basis, with the uniform optimization design method, the best branch rounding radius of the confluence tee joint and the branch t
APA, Harvard, Vancouver, ISO, and other styles
10

Hussein Juber, Anahed. "Modeling Of Double- Fillet Tee joint in solidwork simulation." University of Thi-Qar Journal for Engineering Sciences 8, no. 3 (2017): 20–29. http://dx.doi.org/10.31663/utjes.v8i3.91.

Full text
Abstract:
The research aims to study and simulation weld joint type Double –Fillet Tee Joint ,It was studied stress concentration along the weld area and calculate the required weld size under effect variable loads (1,2,4)kN by using Finite Element Method through a program Solidwork Simulation 2013.It has been identified weld size (4mm) as the value of fixed for all loads, this value is proposed from welding of scientists as the default value ranging (4-10)mm and used a feature (Edge Weld Check Plot) in solidwork program .It has compared the theoretical results with the analytical results ,the ratio of
APA, Harvard, Vancouver, ISO, and other styles
11

Feng, Yan Ting, Xiang Feng Zheng, and Xue Xia Xu. "Failure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Platen Superheater Header." Advanced Materials Research 538-541 (June 2012): 1992–97. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1992.

Full text
Abstract:
Failure cause analysis was carried out on tee joint crack of boiler platen superheater header (12Cr1MoV) of subcritical power station applying microanalysis, mechanical properties test, chemical composition analysis, metallography examination and SEM observation etc. Results indicated that the tee joint crack originated at the original defects, connected with reheat cracks during propagation and led to leakage finally. The improper structure, the original welding defects, overhigh welding heat input, and excessive welding residual stress resulted in the leakage failure.
APA, Harvard, Vancouver, ISO, and other styles
12

Wang, Qing, Xiang Feng Zheng, Yan Ting Feng, et al. "Research on Welding Repair for Tee Joint Crack of Subcritical Power Station Boiler Platen Superheater Header." Advanced Materials Research 628 (December 2012): 173–78. http://dx.doi.org/10.4028/www.scientific.net/amr.628.173.

Full text
Abstract:
Through methods, such as microscope analysis, metallography examination, the causes resulting in tee joint crack of subcritical power station boiler platen superheater header have been analyzed. The result indicates the tee joint crack originated in the original defects, expanded to connect with reheat cracking and leaked finally. In repair crack, the measures of reducing residual stress, such as lower welding heat input, reducing thickness of welding layer, hammer blowing, assigning reasonably heat treatment power ,lengthening holding time and so on, were taken. The welding repair succeeded g
APA, Harvard, Vancouver, ISO, and other styles
13

Zaira, Jupri Yanda, and Agus Wijianto. "Pelatihan Tukang Las Fillet Untuk Pemuda Putus Sekolah Di Provinsi Riau." JITER-PM (Jurnal Inovasi Terapan - Pengabdian Masyarakat) 2, no. 1 (2024): 8–17. http://dx.doi.org/10.35143/jiter-pm.v2i1.6253.

Full text
Abstract:
Program Pengabdian Kepada Masyarakat (PkM) merupakan bentuk kegiatan yang dilakukan oleh praktisi pendidikan yang mempunyai keahlian diberbagai bidang keilmuan dalam bentuk kegiatan tridarma perguruan tinggi. Program ini diberikan kepada masyarakat bertujuan untuk meningkatkan sumber daya manusia yang mempunyai kompetensi, dalam hal ini bidang pengelasan. Program ini merupakan kerjasama yang berkelanjutan untuk angkatan ke 3 yang dilakukan oleh Politeknik Caltex Riau dengan Mitra PkM yaitu LAZnas PHR – Karyawan Muslim Indonesia. Kegiatan dilakukan selama lebih kurang 3 bulan, dimulai dengan pr
APA, Harvard, Vancouver, ISO, and other styles
14

Zaira, Jupri Yanda, and Agus Wijianto. "Pelatihan Fillet Welder Untuk Pemuda Tempatan Di Provinsi Riau (Batch 2)." JITER-PM (Jurnal Inovasi Terapan - Pengabdian Masyarakat) 1, no. 1 (2023): 20–29. http://dx.doi.org/10.35143/jiterpm.v1i1.5872.

Full text
Abstract:
Program Pengabdian Kepada Masyarakat (PkM) merupakan bentuk kegiatan yang dilakukan oleh praktisi pendidikan yang mempunyai keahlian diberbagai bidang keilmuan dalam bentuk kegiatan tridarma perguruan tinggi. PkM ini diberikan kepada masyarakat bertujuan untuk meningkatkan sumber daya manusia yang mempunyai kompetensi, dalam hal ini bidang pengelasan. PkM ini merupakan kerjasama yang berkelanjutan yang dilakukan oleh Politeknik, dalam hal ini adalah Politeknik Caltex Riau dengan Mitra PkM yaitu LAZnas PHR South Area. Kegiatan dilakukan selama lebih kurang 3 bulan, dimulai dengan proses seleksi
APA, Harvard, Vancouver, ISO, and other styles
15

Ren, Jun Jie, Wei Feng Ma, Xue Liang He, et al. "Mechanical Properties of Girth Weld with Different Butt Materials Severed for Natural Gas Station." Materials Science Forum 944 (January 2019): 821–27. http://dx.doi.org/10.4028/www.scientific.net/msf.944.821.

Full text
Abstract:
Weld samples imitating the inservice girth welds in station (L245 straight pipe jointed to WPHY-70 tee joint and L415MB straight pipe jointed to WPHY-80 tee joint) were prepared. Tensile, bending, impact toughness and hardness of the joints were investigated. Results show that under tensile or bending load, failure occurred from the side with lower grade and smaller wall thickness. Relatived to the lower grade side, the weld seam is strong match. Significant change of impact toughness can be found in weld seam center and the heat affected zones (HAZ). The impact energy of seam center is the lo
APA, Harvard, Vancouver, ISO, and other styles
16

Dulieu-Smith, J. M., S. Quinn, R. A. Shenoi, P. J. C. L. Read, and S. S. J. Moy. "Thermoelastic stress analysis of a GRP tee joint." Applied Composite Materials 4, no. 5 (1997): 283–303. http://dx.doi.org/10.1007/bf02481395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Shenoi, R. A., P. J. C. L. Read, and C. L. Jackson. "Influence of Joint Geometry and Load Regimes on Sandwich Tee Joint Behaviour." Journal of Reinforced Plastics and Composites 17, no. 8 (1998): 725–40. http://dx.doi.org/10.1177/073168449801700804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Beygi, Reza, Amir Abbas Talkhabi, Majid Zarezadeh Mehrizi, Eduardo A. S. Marques, Ricardo J. C. Carbas, and Lucas F. M. da Silva. "A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior." Metals 13, no. 6 (2023): 1027. http://dx.doi.org/10.3390/met13061027.

Full text
Abstract:
The development of new joint configurations suitable for dissimilar materials enables a wider range of applications and allows for an accelerated replacement of traditional structural construction materials by lightweight materials. The T-configuration is a joint configuration that has not been sufficiently studied for use with dissimilar materials, especially when created using the friction stir welding (FSW) process. In this study, a combined lap/butt design was introduced and implemented, seeking to create a T-joint between aluminum and steel. Characterization of the joints showed that FSW
APA, Harvard, Vancouver, ISO, and other styles
19

Soroushian, Siavash, Arash E. Zaghi, Manos Maragakis, Alicia Echevarria, Yuan Tian, and Andre Filiatrault. "Analytical Seismic Fragility Analyses of Fire Sprinkler Piping Systems with Threaded Joints." Earthquake Spectra 31, no. 2 (2015): 1125–55. http://dx.doi.org/10.1193/083112eqs277m.

Full text
Abstract:
For the first time, an analytical modeling methodology is developed for fire sprinkler piping systems and used to generate seismic fragility parameters of these systems. The analytical model accounts for inelastic behavior constituents of the system, including: threaded joints, solid braces, hangers, and restrainers. The model incorporates a newly developed hysteresis model for threaded tee joints that is validated by the experimental results of several tee subassemblies. The modeling technique at the subsystem level is validated by using the experimental results of a sprinkler piping system.
APA, Harvard, Vancouver, ISO, and other styles
20

Yu, Tingchao, Liang Tao, Yu Shao, and Tuqiao Zhang. "Experimental study of solute mixing at double-Tee junctions in water distribution systems." Water Supply 15, no. 3 (2014): 474–82. http://dx.doi.org/10.2166/ws.2014.128.

Full text
Abstract:
Recent studies have focused on mixing behavior at cross junctions, and incomplete mixing at cross junctions in water distribution systems was verified. Nevertheless, the research results on mixing at other junction configurations, such as double-Tee junctions, were insufficient. Double-Tee junctions can potentially be misrepresented as cross junctions because of network skeletonization. Hence, the diffusion and dilution of the contaminants at junctions were largely underestimated. To examine the mixing phenomenon and collect accurate mixing data at the double-Tee junction, a series of laborato
APA, Harvard, Vancouver, ISO, and other styles
21

Kang, C. T., D. G. Moffat, and J. Mistry. "Ultimate strength of a double-tee tubular joint subjected to combined chord compression and brace out-of-plane bending." Journal of Strain Analysis for Engineering Design 33, no. 5 (1998): 385–94. http://dx.doi.org/10.1243/0309324981513084.

Full text
Abstract:
The effects of chord axial compression on the ultimate strength of a double-tee (DT) tubular joint subjected to brace out-of-plane bending have been studied both experimentally and numerically. The results from four experimental tests with different levels of chord compression are presented, together with the results of a parametric study using non-linear finite element procedures. The results are compared with the American Petroleum Institute's design rules for DT joints subjected to combined brace and chord loading.
APA, Harvard, Vancouver, ISO, and other styles
22

Mehedi, Ibrahim M., and Mohd Heidir Mohd Shah. "Position Control of Rotary Flexible Joint System Using Adaptive Dynamic Inversion." IEEJ Transactions on Electrical and Electronic Engineering 17, no. 1 (2021): 96–102. http://dx.doi.org/10.1002/tee.23491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Jadidi, Aydin, Yongcui Mi, Fredrik Sikström, Morgan Nilsen, and Antonio Ancona. "Beam Offset Detection in Laser Stake Welding of Tee Joints Using Machine Learning and Spectrometer Measurements." Sensors 22, no. 10 (2022): 3881. http://dx.doi.org/10.3390/s22103881.

Full text
Abstract:
Laser beam welding offers high productivity and relatively low heat input and is one key enabler for efficient manufacturing of sandwich constructions. However, the process is sensitive to how the laser beam is positioned with regards to the joint, and even a small deviation of the laser beam from the correct joint position (beam offset) can cause severe defects in the produced part. With tee joints, the joint is not visible from top side, therefore traditional seam tracking methods are not applicable since they rely on visual information of the joint. Hence, there is a need for a monitoring s
APA, Harvard, Vancouver, ISO, and other styles
24

Cheng, Mei, and Zhi Min Zhang. "Metal Flow Behaviour in Tee Joint Valve Body Multidirectional Extrusion." Materials Science Forum 747-748 (February 2013): 431–36. http://dx.doi.org/10.4028/www.scientific.net/msf.747-748.431.

Full text
Abstract:
By multi-axis active load deformation method, the equivalence diameter tee joint was formed on multi-axis numerical control hydraulic press machine. The loading route was determined by numerical simulation. The experiment results showed that two loading method can complete form the parts. The different directions metal flow was observed under multi-axis loading conditions. To simplify analysis, the flow field was divided into several regions. In every region, the metal flow direction was only one. In multi-axis loading, the way of deformation follows priority deformation principle: The metal f
APA, Harvard, Vancouver, ISO, and other styles
25

Ju, Bu Seog, and Abhinav Gupta. "Seismic fragility of threaded Tee-joint connections in piping systems." International Journal of Pressure Vessels and Piping 132-133 (August 2015): 106–18. http://dx.doi.org/10.1016/j.ijpvp.2015.06.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

A.Uraiyer, Faris. "USING FILLET WELDS INSTEAD OF CJP GROOVE WELDS IN DIRECTLY-WELDED FLANGE FR MOMENT CONNECTIONS." Kufa Journal of Engineering 8, no. 3 (2017): 90–102. http://dx.doi.org/10.30572/2018/kje/8031163.

Full text
Abstract:
The possibility to use fillet welds instead of complete joint penetration welds (CJP ) in directly- welded flange FR (fully restrained) connections is the main aim of this study. An experimental comparison has been made between these two types of welds. Fifteen specimens have been configured by welding plates to form butt, Tee and lap joint connections; three specimens with butt-joint, six with lap-joint, and six specimens were with T-joint. Fillet and CJP groove welds separately have been used to make these connections. After testing of all these specimens, the results indicated that the appr
APA, Harvard, Vancouver, ISO, and other styles
27

Pochernyaev, Vitaly, Nataliia Syvkova, and Mariia Mahomedova. "POLARIZATION SELECTOR ON WAVEGUIDES PARTIALLY FILLED BY DIELECTRIC." Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska 14, no. 4 (2024): 28–31. https://doi.org/10.35784/iapgos.6340.

Full text
Abstract:
In this article, a polarization selector, which based on waveguides partially filled by dielectric has been developed and investigated. An analysis of the designs of polarization selectors on empty waveguides was carried out. The developed design of the polarization selector is based on square waveguides partially filled by dielectric in the form of an E-tee. The main and side waveguides of the E-tee include metal gratings with mutually perpendicular conductors. The dielectric plates have a square cross-section and extend between the second and third conductors of metal grids, which located in
APA, Harvard, Vancouver, ISO, and other styles
28

Liang, Ruiyu, Xia Wang, Qingyun Wang, and Cairong Zou. "A joint echo cancellation algorithm for quick suppression of howls in hearing aids." IEEJ Transactions on Electrical and Electronic Engineering 12, no. 4 (2017): 565–74. http://dx.doi.org/10.1002/tee.22412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Ruan, Jiangjun, Liezheng Tang, Rou Chen, et al. "Study on sensitivity characteristic of capacitive coupler for PD detection in HV cable joint." IEEJ Transactions on Electrical and Electronic Engineering 14, no. 10 (2019): 1442–49. http://dx.doi.org/10.1002/tee.22961.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

KOIKE, Sekiya, Hiroshi KIMURA, Takashi KAWAMURA, Norihisa FUJII, Keizo TAKAHASHI, and Michiyoshi AE. "448 Joint torques of the upper limbs in baseball tee batting." Proceedings of the Dynamics & Design Conference 2003 (2003): _448–1_—_448–6_. http://dx.doi.org/10.1299/jsmedmc.2003._448-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

KAWAMURA, Chuii. "Fastening characteristics of the tee-joint with sheared tab and slot." Transactions of the Japan Society of Mechanical Engineers Series C 54, no. 507 (1988): 2760–64. http://dx.doi.org/10.1299/kikaic.54.2760.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Lee, Seong-Hui, Jin-Ho Kim, and Sung-Mo Choi. "Structural behavior of tension joint with high-strength bolted split-tee." International Journal of Steel Structures 9, no. 2 (2009): 93–105. http://dx.doi.org/10.1007/bf03249484.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Francavilla, Antonella B., Massimo Latour, P. J. Tan, and Gianvittorio Rizzano. "Ultimate behaviour of bolted beam‐to‐column connections in large rotations." ce/papers 6, no. 3-4 (2023): 2201–5. http://dx.doi.org/10.1002/cepa.2652.

Full text
Abstract:
AbstractThe capacity of steel Moment Resisting Frames (MRFs) to survive to extreme load is strictly linked to the moment‐rotation capacity of the beam‐to‐column connections. In those conditions, i.e., in extreme loading conditions, catenary actions develop in the connected beam leading in large joint rotations. The current European code, the Eurocode 3 Part 1‐8, neglects the regime of large joints rotations in the modelling leading to gross under‐ (or over‐) prediction of its response. In fact, recent works have shown that geometrical nonlinearity strongly influence the overall behaviour of co
APA, Harvard, Vancouver, ISO, and other styles
34

Niklas, Karol, and Janusz Kozak. "Influence of the Notch Rounding Radius on Estimating the Elastic Notch Stress Concentration Factor in a Laser Welded Tee Joint." Materials Science Forum 726 (August 2012): 100–105. http://dx.doi.org/10.4028/www.scientific.net/msf.726.100.

Full text
Abstract:
In recent years an increased interest of industry in sandwich-type metal structures can be observed. These structures consist of thin plates of 2.5 mm in thickness separated by stiffeners of different shapes and forms. Welds joining the plates and stiffeners are made on the outer side of the plates using laser welding technique. A locally focused source of heat causes the plate to melt creating a very narrow and elongated joint. As a result, sharp geometric notches are formed on the side of the root of a weld – a place which is inaccessible and cannot be checked. Geometries of individual welde
APA, Harvard, Vancouver, ISO, and other styles
35

Pecknold, David, Peter Marshall, and Justin Bucknell. "New API RP2A Tubular Joint Strength Design Provisions." Journal of Energy Resources Technology 129, no. 3 (2007): 177–89. http://dx.doi.org/10.1115/1.2748811.

Full text
Abstract:
The development of the new API RP2A (22nd edition) parametric static strength prediction equations for planar circular hollow section tubular joints is described. Prediction equations are presented for brace axial, brace in-plane bending, and brace out-of-plane bending loads. The prediction equations are based on screened test databases, augmented, and extended by an extensive new series of validated nonlinear finite element simulations for nonoverlapping K joints, double tee (DT/X) joints, and T joints. The increased reliability (reduced scatter) provided by the new static strength formulatio
APA, Harvard, Vancouver, ISO, and other styles
36

Liu, Zhi Ming, Wei Gang Hu, and Yue Chen. "Co-Design Research on the Welding Structure of the Metro Bogie." Applied Mechanics and Materials 365-366 (August 2013): 261–67. http://dx.doi.org/10.4028/www.scientific.net/amm.365-366.261.

Full text
Abstract:
In order to study the influence of welding process and local detail design to the life of the metro bogie frame, this paper, in view of the tee joint, researched the superposition of residual stress and external load influence on the structure strength by the finite element simulation to establish mechanical structure and welding process co-design method. Based on the above research, the fatigue strength of the overlapping structure of welding frame socket plate and beam was improved, by the co-design of the groove angle and joint-welding sequence.
APA, Harvard, Vancouver, ISO, and other styles
37

Wehbe, Nadim, Michael Konrad, and Aaron Breyfogle. "Joint Detailing Between Double Tee Bridge Girders for Improved Serviceability and Strength." Transportation Research Record: Journal of the Transportation Research Board 2592, no. 1 (2016): 108–16. http://dx.doi.org/10.3141/2592-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Petkovic, Ana, Nemanja Menkovic, Olga Petrovic, et al. "The Role of Echocardiography and Cardiac Computed Tomography in Diagnosis of Infective Endocarditis." Journal of Clinical Medicine 12, no. 17 (2023): 5482. http://dx.doi.org/10.3390/jcm12175482.

Full text
Abstract:
Background: Infective endocarditis (IE) is a rare disease with a high mortality rate and rising incidence, requiring timely and precise diagnosis in order to choose appropriate therapy. Imaging of morphologic lesions is an integrative part of diagnosis. Artifacts and the patient’s habitus make echocardiography difficult to visualize advanced-form IE. Cardiac computed tomography (CCT) constantly shows an additive diagnostic value due to high resolution of cardiac anatomy. Conjecturally, joint application of both diagnostic tests improves overall sensitivity and specificity in diagnosing IE. Met
APA, Harvard, Vancouver, ISO, and other styles
39

Zhang, Mei, Qing Shan Li, Chao Bin Huang, et al. "Weldability of Ti-Microalloyed Advanced High Strength Steel CP 800." Advanced Materials Research 634-638 (January 2013): 2899–903. http://dx.doi.org/10.4028/www.scientific.net/amr.634-638.2899.

Full text
Abstract:
Complex phase steel CP 800, a kind of advanced high strength steel (AHSS), exhibited quite high carbon equivalent (CE) which was a detrimental factor for weldability of steels. Thus the weldability of CP 800 steels containing (in wt%) 0.06C-0.45Si-1.71Mn-0.11Ti was extensively studied. Mechanical properties and impact toughness of butt joint, the welding crack susceptibility of weld and heat-affected-zone (HAZ) for tee joint, Control Thermal Severity (CTS) welded joint, and 60°Y-groove butt joint were inspected after gas shielded arc welding tests. The impact toughness was larger than 27J eith
APA, Harvard, Vancouver, ISO, and other styles
40

Zhang, Zhao-Xiang, and You-Zhao He. "On-line cation-exchange preconcentration and capillary electrophoresis coupled by tee joint interface." Journal of Chromatography A 1066, no. 1-2 (2005): 211–18. http://dx.doi.org/10.1016/j.chroma.2005.01.081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Koutroumpouchos, Nikolaos, Christoforos Ntantogian, and Christos Xenakis. "Building Trust for Smart Connected Devices: The Challenges and Pitfalls of TrustZone." Sensors 21, no. 2 (2021): 520. http://dx.doi.org/10.3390/s21020520.

Full text
Abstract:
TrustZone-based Trusted Execution Environments (TEEs) have been utilized extensively for the implementation of security-oriented solutions for several smart intra and inter-connected devices. Although TEEs have been promoted as the starting point for establishing a device root of trust, a number of published attacks against the most broadly utilized TEE implementations request a second view on their security. The aim of this research is to provide an analytical and educational exploration of TrustZone-based TEE vulnerabilities with the goal of pinpointing design and implementation flaws. To th
APA, Harvard, Vancouver, ISO, and other styles
42

Steel, John A. "Elastic Wave Transmission between Walls in Framed Buildings." Building Acoustics 3, no. 1 (1996): 55–66. http://dx.doi.org/10.1177/1351010x9600300105.

Full text
Abstract:
The majority of framed buildings have joints between walls with a column running along the joint. Recent work has identified the importance of the column which generally reduces sound transmission between walls at high frequencies. In this work the effects of incident longitudinal or transverse waves as well as flexural waves at a joint with a column is studied together with the effects of an eccentricity. For incident flexural waves the importance of deformation of a column cross section due to shear forces on connected plates has been identified. In this work all of these properties are cons
APA, Harvard, Vancouver, ISO, and other styles
43

Silva, Diogo FM, Ivo MF Bragança, Carlos MA Silva, Luis M. Alves, and Paulo AF Martins. "Joining by forming of additive manufactured ‘mortise-and-tenon’ joints." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 1 (2017): 166–73. http://dx.doi.org/10.1177/0954405417720954.

Full text
Abstract:
This article is aimed at extending the ‘mortise-and-tenon’ joining concept commonly utilized in corner or tee joints to lap joints in which one sheet is partially placed over another without any change in their shape. The approach makes use of wire arc additive manufacturing to fabricate the tenons and allows various shapes and thicknesses to be made from a wide range of metallic materials. Upset compression of the tenons is utilized to mechanically lock the two sheets being joined. Experimental and finite element simulation works performed with monolithic (aluminium–aluminium) and hybrid (alu
APA, Harvard, Vancouver, ISO, and other styles
44

Latour, Massimo, Sabatino Di Benedetto, Antonella Bianca Francavilla, Alberico Saldutti, and Gianvittorio Rizzano. "Mechanical Modelling of the Strength and Stiffness of Circular Hollow Section Tube under Localised Transverse Compression and Tension." Materials 16, no. 7 (2023): 2641. http://dx.doi.org/10.3390/ma16072641.

Full text
Abstract:
The component method is a powerful tool for designing and modelling steel beam-to-column connections. Its widespread use is ensured by several formulations currently included in Eurocode 3 part 1.8 for welded and bolted joints. However, the recent use of 3D Laser Cutting Technology (3D-LCT) in the construction market has enlarged the range of solutions, allowing the realisation of tubular columns with passing-through elements. Given the recent development, no design formulations are currently provided for this typology. At this moment, only a few research studies have developed to fill this kn
APA, Harvard, Vancouver, ISO, and other styles
45

Jiang, Wei. "Numerical Study of Welding Sequence on the Residual Stress Field in a Thick-Walled Tee Joint." Advanced Materials Research 219-220 (March 2011): 1211–14. http://dx.doi.org/10.4028/www.scientific.net/amr.219-220.1211.

Full text
Abstract:
Finite element simulation is an efficient method for studying factors affecting weld-induced residual stress distributions. In this paper, a validated three-dimensional finite element model consisting of sequentially coupled thermal and structural analyses was developed. Three possible symmetrical welding sequences, i.e. one-welder, two-welder and four-welder sequence, which were perceived to generate the least distortion in actual welding circumstances, were proposed and their influences on the residual stress fields in a thick-walled tee joint were investigated. Appropriate conclusions and r
APA, Harvard, Vancouver, ISO, and other styles
46

Syarief, Akhmad, and Baramsyah Baramsyah. "PENGARUH VARIASI PENDINGIN TERHADAP KEKUATAN BENDING PADA PENGELASAN TEE JOINT EQUALIZER TYPE YORK TRAILER." Scientific Journal of Mechanical Engineering Kinematika 4, no. 1 (2019): 57–66. http://dx.doi.org/10.20527/sjmekinematika.v4i1.52.

Full text
Abstract:
In the present era of technological developments in the industrial world is growing and progressing. But in the industrial world can not be separated from the manufacturing process, especially in the field of welding, because welding has an important role in engineering or reparasi-raparasi associated with metal welding. And also a lot of welding is used in the field of design. The scope of welding use in construction is very wide including shipping industry, bridge, steel frame, heavy equipment, transportation facilities, pipeline and so forth. In the process of welding requires a person who
APA, Harvard, Vancouver, ISO, and other styles
47

Kubicki, Krzysztof. "THE ANALYSIS OF THE RESISTANCE OF TEE JOINT FILLET WELDS ACCORDING TO EUROCODE 3." Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo 177, no. 27 (2021): 106–11. http://dx.doi.org/10.17512/znb.2021.1.16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Kemal Apalak, M., Recep Gunes, M. Onder Turaman, and A. Alper Cerit. "Thermal and geometrically non-linear stress analyses of an adhesively bonded composite tee joint." Composites Part A: Applied Science and Manufacturing 34, no. 2 (2003): 135–50. http://dx.doi.org/10.1016/s1359-835x(02)00233-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Liu, Gang, Junyang Peng, Shijian Yuan, Bugang Teng, and Kai Li. "Analysis on critical conditions of sidewall wrinkling for hydroforming of thin-walled Tee-joint." International Journal of Machine Tools and Manufacture 97 (October 2015): 42–49. http://dx.doi.org/10.1016/j.ijmachtools.2015.06.004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Tian, Yuan, Andre Filiatrault, and Gilberto Mosqueda. "Experimental Seismic Fragility of Pressurized Fire Suppression Sprinkler Piping Joints." Earthquake Spectra 30, no. 4 (2014): 1733–48. http://dx.doi.org/10.1193/111011eqs278m.

Full text
Abstract:
Pressurized fire suppression sprinkler piping is a critical nonstructural system that must remain operational after an earthquake, particularly in critical facilities. Observations from past earthquakes have demonstrated that the locations most susceptible to damage in sprinkler piping systems are the joints, sprinkler heads, support hangers, and bracing systems. However, field observations and previous experimentations are insufficient to fully characterize the response of sprinkler piping systems under seismic actions and to develop effective solutions to improve their performance. This pape
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!