Academic literature on the topic 'TekNO'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'TekNO.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "TekNO"

1

Töre SİVRİOĞLU, Ulaş. "Sasanilerde Askeri Teşkilat, Silah Tekno." Journal of Turkish Studies 8, Volume 8 Issue 5 (January 1, 2013): 675–703. http://dx.doi.org/10.7827/turkishstudies.4691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

DURUKAL, ONUR. "KAMUSAL HİZMET SUNUMUNDA BLOKCHAIN TEKNO." Ekev Akademi Dergisi, no. 77 (January 1, 2019): 449–56. http://dx.doi.org/10.17753/ekev1034.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nugroho, Ananto, Triastuti Triastuti, Agung Sumarno, and Eko Widodo. "Studi Tekno-Ekonomi Bata CLC (Cellular Leightweight Concrete) Sebagai Pengganti Bata Konvensional." Rekayasa Sipil 7, no. 1 (February 5, 2018): 55. http://dx.doi.org/10.22441/jrs.2018.v07.i1.05.

Full text
Abstract:
Cellular Lightweight Concrete (CLC) merupakan salah satu teknologi beton aerasi yang dapat dikembangkan sebagai suatu usaha kecil dan menengah. Bata CLC memiliki karakteristik yang ringan dan baik untuk digunakan sebagai komponen non struktural seperti pada dinding bangunan. Sebagai usaha baru di pasar, bata CLC perlu dilakukan analisis tekno-ekonomi bata CLC sebagai pengganti bata konvensional berdasarkan proyek percontohan yang telah dilakukan. Dari proyek percontohan diperoleh produk CLC yang memenuhi standar persyaratan dengan nilai kerapatan 900-1000 kg/m3 dan kuat tekan sebesar 2.9 - 3.85 MPa. Hasil analisa tekno-ekonomi menunjukkan kelayakan finansial dengan nilai pengembalian investasi (ROI) sebesar 13.10%. Perbandingan biaya pekerjaan per meter persegi bata CLC juga menunjukan biaya yang lebih kompetitif bila dibandingan dengan bata merah biasa. Oleh karena itu bata CLC layak dikembangkan sebagai peluang usaha. Kata kunci : bata CLC, proyek percontohan, peluang usaha, tekno-ekonomi.
APA, Harvard, Vancouver, ISO, and other styles
4

Sepdian, Sepdian, and Syafii Syafii. "Simulasi Tekno-Ekonomi Pengembangan Photovoltaic pada Gedung." Jurnal Surya Teknika 5, no. 01 (June 1, 2017): 1–5. http://dx.doi.org/10.37859/jst.v5i01.349.

Full text
Abstract:
This research is related to the development of pv system scanning at Politeknik Jambi and economic analysis using RETScreen software. The purpose of this research is to design photovoltaic system at building of Politeknik Jambi, to analyze photovoltaic technology for Poliknik Jambi building and to calculate photovoltaic economy for Politeknik Jambi building. The results showed that the required PV system of 135 kW/day, while based on the results of economic analysis using RETScreen Software required development cost of IDR 4.696.030.000 and capital turnover time for 20 years. This result shows that the system is designed to be built in Politeknik Jambi.
APA, Harvard, Vancouver, ISO, and other styles
5

Ariyanti, Sri, and Kautsarina Kautsarina. "Kajian Tekno-Ekonomi pada Telehealth di Indonesia." Buletin Pos dan Telekomunikasi 15, no. 1 (June 30, 2017): 43. http://dx.doi.org/10.17933/bpostel.2017.150104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aswan, Aswan. "TEKNO-CULTURE: MEMAHAMI KONDISI MASYARAKAT MASA DEPAN." PALITA: Journal of Social - Religion Research 2, no. 1 (April 5, 2017): 25. http://dx.doi.org/10.24256/pal.v2i1.518.

Full text
Abstract:
The development of advanced communications technology has brought about fundamental changes in the world of life. A number of views on the spirit behind the progress are emerging, as well as about the effects it incurs. This paper tries to see two basic things. First about the passion and trends behind the advances in communication technology. This section includes all-free behavior that encourages the tendency of abnormalities, identity greed, the speed and interconnectedness. Second, about the spirit of thought that underlies the advancement of communication technology. This section reviews the three currents of thought that become the dominant discusus in viewing technology. That thought is; 1) utopianism as an optimistic view of the positive role of science and technology, 2) dystopianism, as a pessimistic view of science and technology, and 3) hypertopianism, as the 'fatalist' view of science and technology. The various streams of thought that the author studied from a number of literatures in this field show the tendency of many thinkers to highlight the negative aspects of the latest advances in communication technology. Similarly depicted in this paper, the gloomy portrayal of the future of communication technology in this paper can be viewed positively, that it gives us a map of the spirit of progress, as a "long-warning system" that provides mapping, and the possibility of the future by departing from current social, cultural and technological trends can help us read its constellations and impacts
APA, Harvard, Vancouver, ISO, and other styles
7

Aswan, Aswan. "TEKNO-CULTURE: MEMAHAMI KONDISI MASYARAKAT MASA DEPAN." Palita: Journal of Social-Religion Research 2, no. 1 (August 17, 2018): 25–36. http://dx.doi.org/10.24256/pal.v2i1.65.

Full text
Abstract:
The development of advanced communications technology has brought about fundamental changes in the world of life. A number of views on the spirit behind the progress are emerging, as well as about the effects it incurs. This paper tries to see two basic things. First about the passion and trends behind the advances in communication technology. This section includes all-free behavior that encourages the tendency of abnormalities, identity greed, the speed and interconnectedness. Second, about the spirit of thought that underlies the advancement of communication technology. This section reviews the three currents of thought that become the dominant discusus in viewing technology. That thought is; 1) utopianism as an optimistic view of the positive role of science and technology, 2) dystopianism, as a pessimistic view of science and technology, and 3) hypertopianism, as the 'fatalist' view of science and technology. The various streams of thought that the author studied from a number of literatures in this field show the tendency of many thinkers to highlight the negative aspects of the latest advances in communication technology. Similarly depicted in this paper, the gloomy portrayal of the future of communication technology in this paper can be viewed positively, that it gives us a map of the spirit of progress, as a "long-warning system" that provides mapping, and the possibility of the future by departing from current social, cultural and technological trends can help us read its constellations and impacts
APA, Harvard, Vancouver, ISO, and other styles
8

BECERİKLİ, Rifat. "Wolverine (2013) Filminin Tekno- Oryantalizm Bağlamında İncelenmesi." Erciyes İletişim Dergisi 7, no. 2 (July 24, 2020): 1055–76. http://dx.doi.org/10.17680/erciyesiletisim.724560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

AYDIN, Yavuz. "Karain Mağarası Tayacian Alet Endüstrisi Tekno-Tipolojisi." Ankara Üniversitesi Dil ve Tarih-Coğrafya Fakültesi Dergisi 58, no. 2 (December 28, 2018): 1327. http://dx.doi.org/10.33171/dtcfjournal.2018.58.2.8.

Full text
Abstract:
Çalışmamız kapsamında Karain Mağarası'nın Alt Paleolitik seviyelerinden bulunmuş olan toplam 261 adet yontmataş aletin tekno-tipolojik analizleri gerçekleştirilmiştir. Yapılmış olan çalışmalara göre yontmataş alet topluluğunun Alt Paleolitik Dönem'in Tayacian kültür özelliklerini gösterdiği tespit edilmiştir. Karain çevresindeki radyolarit kaynakları Tayacian endüstrisinin yapımında yoğunlukla tercih edilmiştir. Ayrıca daha az oranlarda çakmaktaşının da kullanıldığı görülmüştür. Yontmataş aletler üzerinde tespit edilen teknolojik veriler sert vurgaçla doğrudan yongalama tekniğinin tercih edilmiş olduğunu göstermiştir. Levallois teknolojiyi yansıtan herhangi bir kanıt yoktur. Tipolojik gözlemlere göre birçok farklı yontmataş alet tipi tespit edilmiştir. Ayrıca aletler üzerinde yapılan çalışmalara göre baskın düzelti tipinin pulcuklu tip düzelti olduğu görülmüştür. Çalışma kapsamında elde edilen sonuçlar Karain Alt Paleolitik yontmataş alet endüstrisinin daha iyi anlaşılmasını sağlayan bir veri tabanı niteliğindedir.
APA, Harvard, Vancouver, ISO, and other styles
10

Setién Echenique, Oihane, and Carol Pascual Ortiz. "Urtarokobiltegiratze termikoko sistemen bideragarritasun tekno-ekonomikoaren azterketa." EKAIA Euskal Herriko Unibertsitateko Zientzi eta Teknologi Aldizkaria, no. 30 (October 27, 2016): 71–79. http://dx.doi.org/10.1387/ekaia.15854.

Full text
Abstract:
Gaur egun, Europako energiaren kontsumo osoaren %40 eraikinek eragiten dute.Kontsumo horren barnean, eraikinetako berokuntza eta ur bero sanitarioaren (UBS) erabilera nabarmentzen da, batik bat. Espainiaren kasuan, berokuntza %50 da, eta UBSa, berriz, %27. Proiektu honen bitartez, Espainia mailan Urtarokobiltegiratze termikoko sistemen (STES)bideragarritasun ekonomiko zein energetikoa aztertu da. Espainiako hainbat hiritako eskari termikoak simulatu dira, eta STESaren bitartez berogailuko eta UBSko eskari osoaren %45-60 artean asetzeko saiakera egin da. Beraz, ikusita eraikinetan kontsumo energetiko handia izaten dela, eta, gainera,jakinda Eraikuntzarako Kode Teknikoak (CTE) ur bero sanitariorako eguzki-energia termikoaren kontribuzio minimoa derrigortzen duela, sistema horien bideragarritasunaren azterketa ezinbestekoa da. Hala, energia berriztagarrien erabilera sustatzen da.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "TekNO"

1

Hammarling, Ida. "TekNO." Thesis, University of Gävle, University of Gävle, Department of Mathematics, Natural and Computer Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-4589.

Full text
Abstract:

Syftet med studien är att se om grundskollärare i en kommun i Uppsala län tar tillvara på den tillgång som TekNO kanske kan vara samt se hur lärare och elever ser på TekNO. Metoderna som använts är enkät och kvalitativ intervju. Studien bygger på frågeställningarna:

-           Hur marknadsförs TekNO?

-           Känner lärare i en viss kommun i Uppsala län till projektet TekNO?

-          Använder sig lärare i kommunen av TekNO?

-          Vad tycker lärarna om TekNO?

-          Vad tycker eleverna om TekNO?

Resultatet visar att lärare och elever har positiva åsikter om TekNO:s arbete och att de lär sig nya saker av TekNO. Flertalet lärare i studien som undervisar i teknik och naturvetenskap vet vad TekNO är och har arbetat med något tema tillsammans med TekNO genom skolbesök. Samtliga lärare som har fått skolbesök av TekNO vill ha besök igen. Nittiosju procent av eleverna vill ha besök av TekNO igen. Undersökningen visar att lärare och elever anser att TekNO är ett positivt inslag i undervisningen.

APA, Harvard, Vancouver, ISO, and other styles
2

Amnäs, Ulrika, and Moa Gårdh. "Plasmaförgasningsanläggning för bio-jetbränsle till Bromma flygplats : En tekno-ekonomisk konceptstudie." Thesis, KTH, Energiteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-170862.

Full text
Abstract:
Den internationella flygtrafiken står idag för två procent av det totala koldioxidutsläppet (IPCC, 2007). Denna andel förväntas öka (ICAO, 2013), vilket innebär att flygindustrin kommer ställas inför stora utmaningar i framtiden. Den största utmaningen kommer vara att hitta en lösning på hur industrin ska kunna växa och samtidigt minska sin andel av koldioxidutsläppet. Som ett första steg i att möta denna utmaning undersöker denna rapport en möjlig pilotanläggning i anslutning till Bromma flygplats för att förse flygplatsen med bio-jetbränsle. Jetbränslet ska framställas genom plasmaförgasning och katalysering med biomassa som råvara. Den totala produktionen har antagits vara 50000 ton bränsle per år, vilket skulle göra Bromma Flygplats helt koldioxidneutral. Rapporten fokuserar på de tekno-ekonomiska aspekterna av en sådan anläggning och syftar till att utreda anläggningens lönsamhet. Rapporten har ingen beställare. Syftet är dock att ge en verklighetstrogen bild av de ekonomiska konsekvenserna för Swedavia AB vid eventuell uppbyggande av en anläggning i anslutning till Bromma flygplats. Detta görs genom att de totala investerings- och produktionskostnaderna uppskattas samt genom att jämföra det beräknade bio-jetbränslets konkurrenskraft med dagens bränslepris. För att rapporten ska ge en fullgod bild av anläggningen ur ett tekno-ekonomiskt perspektiv utreds även möjliga finansieringsmodeller. Studiens resultat har tagits fram genom att anläggningen dimensionerats utifrån jämförelser med ett antal referensprojekt. Denna anläggningskonfiguration har sedan legat till grund för de beräkningar som genomförts för att uppskatta bränsleproduktionen, råvarubehovet, elproduktionen och elkonsumtionen samt de totala investerings- och produktionskostnaderna. För att få fram ett resultat beträffande anläggningens lönsamhet har därefter ett pris för bio-jetbränslet och ett nettonuvärde tagits fram. De finansieringsmodeller som sedan tagits fram och undersökts har utgått ifrån uppgifter från Swedavia AB samt jämförelser med befintliga modeller i samband med referensprojekt som studerats. Det resultat som denna studie har kommit fram till är att anläggningens investeringskostnader förväntas uppgå till ungefär 6440 Mkr. Produktionskostnaderna beräknades till 1250 Mkr, vilket gav ett bränslepris på 6,1 kr/liter. Nettonuvärdet för anläggningen, med ett antaget avkastningskrav på nio procent, driftstid 8000 timmar/år och finansieringsstöd från Energimyndigheten på 25 procent beräknades då till -285 miljoner kronor med en återbetalningstid på 27 år. Eftersom anläggningens tekniska livslängd har antagits vara 25 år blir slutsatsen att anläggningen med de angivna antagandena inte skulle vara lönsam.
IPCC has estimated that the aviation industry is responsible for two percent of all man made carbon emissions (IPCC, 2007). An expected increase (ICAO, 2013) of this share puts the aviation industry in front of big challenges for the future. The main obstacle lies within how the industry can grow but at the same time decrease their carbon emissions. As a first step to meet this challenge this report examines a potential pilot plant in connection to Bromma Airport that will provide the airport with bio-jet fuel. The jet fuel will be produced through plasma gasification and through catalysation with biomass as raw material. The total production is assumed to be 50.000 tons of fuel per year, which would make Bromma Airport completely neutral with carbon emissions. The report focuses on the techno economical aspects of a plant and is aimed to investigate if the plant is profitable or not. The purpose of the report is to give a realistic image of the economical consequences for Swedavia AB in the event of setting up a pilot plant in connection to Bromma Airport. This is done by estimating the total investment- and production costs as well as by comparing the calculated competitiveness of the bio jet fuels with todays’ fuel prices. In order for the report to give a satisfactory image of the pilot plant from a techno-economical point of view the report also investigates possible financing models. The studys’ results have been ascertained by dimensioning the plant based on comparisons with a number of reference projects. The configuration of the plant form the basis of the calculations which have been done to estimate the fuel production, the need for raw materials, electricity production and consumption as well as the total investment- and production costs. To get results for the pilot plants profitability, a price for bio jet fuel and net present value (NPV) has been put together. The financing models, which have been developed and investigated, derives from information given by Swedavia AB, as well as comparisons with existing models from already existing projects.  The result, which this study has accomplished, is that the pilot plant investment costs are expected to reach approximately 6440 MSEK. Production costs were calculated to be 1250 MSEK, which made the fuel price 6,1 SEK/liter. The NPV for the pilot plant, with the assumed yield requirements of nine percent, the operating time 8000 hours per year and the financial support from Energimyndigheten on 25 percent, was calculated to -285 MSEK with a payback time of 27 years. As the technical life was assumed to be 25 years it could be concluded that the pilot plant with these assumptions would not be profitable.
APA, Harvard, Vancouver, ISO, and other styles
3

Indredavik, Bård. "Tekno-økonomisk vurdering av ITS-implementering : Realisering av kontinuerlig nett langs vei." Thesis, Norwegian University of Science and Technology, Department of Telematics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-10440.

Full text
Abstract:

Intelligente Transport Systemer (ITS) er løsninger som benytter seg av IKT for å bidra til mer sikkerhet og effektivitet i samferdselssektoren. En viktig faktor innen ITS er kommunikasjon mellom kjøretøy og mellom infrastruktur og kjøretøy. CALM er et standardiseringsprosjekt for kommunikasjonsteknologier, og CVIS er et fireårig prosjekt for å realisere en rekke mål innenfor ITS. Denne oppgaven presenterer og vurderer mulige teknologier som eventuelt kan benyttes for å realisere et kontinuerlig nettverk i et veisystem. Disse teknologiene sammenlignes i et tekno-økonomisk perspektiv. En vurdering av viktige utfordringer ved utbygging av kontinuerlig nett langs vei presenteres også. Basert på den teknologiske gjennomgangen, og utfordringer ved ITS-utbygging, er det gjennomført en case-oppgave som vurderer mulighetene for at Trondheim skal bli et teststed i CVIS-prosjektet. Denne oppgaven tar for seg veistrekningen Trondheim-Værnes. Forslag til ny infrastruktur for å nå noen av målsettingene i CVIS blir gitt, samt kostnadsestimater for Wi-Fi og WiMAX-utbygging. Resultatene av kostnadsberegningene viser at WiMAX vil være mer kostnadseffektiv som kontinuerlig nett mellom Trondheim og Værnes enn Wi-Fi. Å bygge ut UMTS og CDMA450-nett som gir like stor overføringshastighet som WiMAX og Wi-Fi er ikke kostnadseffektivt. Resultatene fra case-oppgaven, de generelle kostnadsestimatene og den teknologiske oversikten, brukes til å drøfte mulighetene for overføringsteknologiene i et ITS-system. Alle har sine styrker og svakheter. Det er derfor ikke mulig å peke på en overføringsteknologi som bør anbefales generelt, fordi rekkevidde, mobilitet og overføringshastighet har innebygde motsetninger. Eksisterende overføringsteknologier blir også sammenlignet med teknologier som kommer i nærmeste framtid, såkalte 4G-teknknologier. I et framtidsperspektiv ser det ut til å gå mot en samling med IP som transportbærer, og de fleste teknologier går mot forksjellige typer av OFDMA som multippel aksess-teknikk. Likevel ser det ut til at det blir flere og ikke færre nett-teknologier i nærmeste framtid. Alle fire eksisterende teknologier har videreføringer og forbedringer under utvikling. En viktig utfordring framover blir derfor å utvikle sømløs overgang mellom overføringsteknologier. Forbedringer i teknologier vil bidra til å øke nytten og potensialet til ITS.

APA, Harvard, Vancouver, ISO, and other styles
4

Kårstein, Asbjørn. "HyNor - den Norske hydrogenveien? : en studie av en stor tekno-politisk hybrid /." Trondheim : NTNU, 2008. http://www.gbv.de/dms/zbw/601699106.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mattsson, Helen, and Jonatan Lindberg. "Vätgasens roll i det regionala energisystemet : Tekno-ekonomiska förutsättningar för Power-to-Power." Thesis, Linköpings universitet, Energisystem, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-173577.

Full text
Abstract:
Alltmer intermittent elkraft byggs idag i Sverige för att öka andelen förnybar el i energisystemet. Detta leder till mer ojämn elproduktion, vilket skapar problem i form av mer volatila och oförutsägbara elpriser. Ett sätt att dämpa effekten av den ökande intermittenta kraften är att använda förnybar vätgasproduktion som lastutjämning. På detta sätt kan vätgasen potentiellt bli en viktig del i den fossilfria energimixen. Att använda vätgas som energilager i en Power-to-Power-applikation (P2P) möjliggör även utnyttjandet av prisarbitrage på elmarknaden. Ett ökat klimatfokus har återuppväckt intresset för hur vätgasproduktion kan göras lönsamt. Några tecken på att satsningar sker är att flera länder satsar stora pengar på vätgastekniker och infrastruktur, där flertalet samarbeten över nationella gränser har etablerats.Denna studie syftar till att undersöka de tekno-ekonomiska förutsättningarna för produktion av förnybar vätgas där lönsamheten av arbitragehandel på elmarknaden Elspot bedöms. Detta innefattar en gedigen granskning av kommersiella tekniker lämpade för Linköpings energisystem, däribland elektrolys, ångreformering och bränslecell. Tre fall konstruerades med olika uppsättningar av ingående komponenter. Sedan utfördes en driftoptimering som tog fram övre och undre prisgränser för produktion respektive konvertering av vätgas mot spotpriset. Optimeringsverktyget Problemlösaren i Excel användes för att få fram dessa gränser. Visual Basic (VBA) användes sedan för att genomföra en lagersimulering som visualiserar lagersaldot för alla årets timmar. För att få fram kostnaden för varje kilogram producerad vätgas användes nuvärdesberäkningen Levelised Cost of Energy (LCOE), vilket även underlättade jämförelsen av de tre fallen. Vilka effekter i form av växthusgasutsläpp de olika anläggningarna medför utvärderades också genom beräkningssättet konsekvensanalys. Där jämfördes effekten i form av nettoutsläpp i koldioxidekvivalenter för integrering av respektive anläggning. Resultaten visar på att det finns kommersiella tekniker som kan integreras med det befintliga energisystemet på ett resurseffektivt sätt, däremot är de ekonomiska förutsättningarna inte lika bra och P2P-lösningarna är idag långt ifrån lönsamma. Anledningen tros vara en kombination av otillräckliga elprisfluktuationer samt låg total systemverkningsgrad (som högst 14%) för samtliga konstruerade fall. De årliga intäkterna från elförsäljningen motsvarar cirka 1 procent av de årliga kostnaderna för anläggningen, och LCOE landade på cirka 1500 kronor. Resultaten från investeringskalkyleringen visar på att en högre utnyttjandegrad leder till en lägre LCOE. Lagersimuleringen visar på att säsongslagring krävs för denna typ av anläggning då fluktuationerna inte är tillräcklig stora på en daglig, veckovis eller månatlig basis. Känslighetsanalys på LCOE och driftoptimeringen visar inte heller på lönsamhetsmöjligheter i P2P-fallen även vid gynnsamma justeringar på parametrarna investeringskostnad, elpris och verkningsgrad. Ur ett klimatperspektiv visar samtliga fall, med ett undantag, på en minskade växthusgasutsläpp i regionen.  Slutsatsen som dras av resultaten från fallstudien är att, trots goda tekniska förutsättningar och positiv inverkan på lokala växthusgasutsläpp, kan en P2P-applikation med vätgaslagring inte göras lönsam i en svensk kontext inom en nära framtid. Däremot visar ett Power-to-Gas-fall potential för lönsamhet, då dess investeringskostnad är mindre samt att systemverkningsgraden är högre.
More and more intermittent electric power is being built in Sweden today to increase the share of renewable electricity in the energy system. This leads to more uneven electricity generation, which creates problems in terms of more volatile and unpredictable electricity prices. One way to dampen the effect of the increasing intermittent power is to use renewable hydrogen production as load shedding. In this way, the hydrogen gas can potentially become an important part of the fossil-free energy mix. Using hydrogen as energy storage in a Power-to-Power application (P2P) also enables the use of price arbitrage in the electricity market. An increased climate focus has rekindled interest in how hydrogen production can be made profitable. Some signs that investments are taking place are that several countries are investing big money on hydrogen technologies and infrastructure, and collaborations across national borders have been established. This study aims to investigate the techno-economic prerequisites for renewable hydrogen production where the profitability of arbitrage on the Elspot market is explored. This comprises a thorough investigation of commercial technologies suited for Linköping’s energy system. Three cases where constructed with different component constellations. Then the operational strategy was optimised which generated a lower and upper price limit for production and conversion of hydrogen with input price data from Elspot. The optimisation tool in Excel was used in order to obtain these price limits. Visual Basic (VBA) was then used for storage simulation in order to get a perception of the storage development through all the hours of the year. The cost of every kilogram of hydrogen produced was then calculated through Levelized Cost of Energy (LCOE), which made the comparison of the three cases easier. The resulting greenhouse gas emissions when integrating the facilities in each case were also evaluated with a so-called impact analysis. The effect was compared in net emissions in carbon dioxide equivalents for an integration of each facility.     The results show that there are commercial technologies that can be integrated with the existing energy system in a resource efficient manner, whereas the economic prerequisites are not as good, where today’s Power-to-Power (P2P) solutions are not profitable. The reason seems to be the combination of insufficient spot price fluctuations and a low system efficiency (14% at best) for each case. The annual revenues correspond to 1 percent of the annual costs and that LCOE lands at about 1500 SEK. A higher utilization percentage of the plant shows a lower LCOE in the investment calculation. The storage simulation indicates that a seasonal storage is needed for this type of facility because of that the spot price fluctuations are not big enough on a daily, weekly or monthly basis. The sensitivity analysis made on the investment calculation and operational strategy also shows that there is no profitability in the P2P cases where parameters regarding investment cost, efficiency and electricity price were set optimistically. The Power-to-Gas case on the other hand shows potential for profitability, all because of lower total investment costs and higher efficiency. All cases except the case with steam methane reforming shows reductions in greenhouse gas emissions when integrated in the regional energy system.   The conclusion that can be drawn from the results in the case study is that, in spite of good technological prerequisites and a positive effect on local greenhouse gas emissions, a P2P-application with hydrogen storage cannot be made profitable in a Swedish context in the near future. However, a Power-to-Gas case shows potential for profitability because of its lesser investment cost and that the system efficiency is higher.
APA, Harvard, Vancouver, ISO, and other styles
6

Lindberg, Simon. "Förnybar gas för värmningsugnar i stålindustrin : Tekno-ekonomisk utvärdering av gasproduktion för SSAB Borlänge." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-75181.

Full text
Abstract:
Sverige strävar efter ett mer hållbart samhälle och har som mål att nå netto nollutsläpp av växthusgaser till atmosfären år 2045. Företag som agerar i Sverige måste därmed göra stora omställningar för att målet ska kunna nås. I detta arbete har möjligheten att ersätta SSAB Borlänges fossila bränslebehov i varmvalsningsprocessen med gas från termisk förgasning undersökts. Genom litteraturstudier, behovsanalys, beräkningar och modellering i Excel har fyra fallstudier med olika förgasningskoncept utvärderats. En stor utmaning har varit att finna lösningar för hantering av de stora värmelasterna i varmvalsningsugnarna. I fallstudierna har olika strategier tillämpats för att hantera dessa; gasmotorer, balansering med gasklocka eller uppgradering till SNG som lagras i kryogena behållare. Ett fall med inköp av biobränslebaserad flytande naturgas (bio-SNG) från externa producenter har också utvärderats. Den tekniska genomförbarheten samt den ekonomiska insatsen och vinningen har utvärderats för att hitta det bästa alternativet. Fallet med gasklockan (Fall 1b) visade på bäst ekonomisk prestanda med en internränta på 1,6%, en återbetalningstid på 21 år och tillverkningskostnad på 518 kr/MWh. Detta är sämre än nuvarande lösning som kostar 470 kr/MWh. De känsligaste faktorerna för kostnaden är biomassans och fossila bränslets priser. Även investeringskostnaden har stor inverkan. En stor fördel med nya lösningen är minskningen av SSAB:s användning av fossila bränslen med cirka 850 GWh som ersätts av förnybar gas.
Sweden strives for a more and more sustainable society and aims to reach the net zero emissions of greenhouse gases to the atmosphere by 2045. Companies that operate in Sweden must therefore make major changes to achieve that goal. In this project, the possibility of replacing SSAB Borl¨anges fossil fuel needs in the hot-rolling process with gas from thermal gasification has been investigated. Through literature studies, needs analysis, calculations and modeling in Excel, four case studies with different gasification concepts have been evaluated. One major challenge has been to find solutions for handling the large heat loads in the hot-rolling furnaces. In the case studies, different strategies have been applied to address these; gas engines, balancing with a gasholder or upgrading to SNG that are stored in cryogenic containers. A case of purchasing biofuel-based liquid natural gas (bio-SNG) from external producers has also been evaluated. The technical feasibility as well as the financial stake and profit have been evaluated to find the best option. The case with the gasholder (Case 1b) showed the best economic performance with an IRR of 1.6%, a payback period of 21 years and manufacturing cost of 518 SEK/MWh. This is worse than the current solution, which costs 470 SEK/MWh. The most sensitive factors are the price of biomass and fossil fuels. The investment cost also has a great impact. A major advantage of the new solution is the reduction of SSAB’s use of fossil fuels with about 850 GWh being replaced by renewable gas.
APA, Harvard, Vancouver, ISO, and other styles
7

Majid, Safwat. "Åtgärder för ökad markanvändning i solcellspark : En tekno-ekonomisk fallstudie om potentialen hos bifacial och solföljare i Solpark Fyrislund." Thesis, Uppsala universitet, Solcellsteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-447110.

Full text
Abstract:
Solar parks are increasingly getting a larger market share of PV installations over the world, and have for the last couple of years managed to establish itself in the Swedish market. The market has for a long time been known for its decline in module prices, which has allowed an emergence of more efficient PV-techniques such as one-axis trackers and bifacial modules. Bifacial modules use the backside of modules for improved utiliziation of incoming light, while one-axis trackers have the ability to track the sun in order to maximise light absorption. These innovations have now caught the interest of companies willing to invest in large-scale PV-farms, where efficient land use is highly regarded. The aim of this thesis was to examine how bifacial modules and one-axis trackers perform in terms of system performance and profitabilty if implemented in 'Solpark Fyrislund', a solar park owned by Vasakronan AB. This was done by modelling and simulating cases in which said techniques were incorporated. The data was later used to estimate profitabilty of each investigated case. Results showed that the highest system performance and profitability was achieved by installing bifacial modules on the site. One-axis trackers are currently too expensive, require higher maintenance and has a higher demand for land, resulting in its profitability not being justified. It was also found that the current configuration could be optimized further for higher profit, by slightly reducing the pitch as well as increasing the tilt of the existing modules. The study should be followed up by further investigating the use of backtracking for one-axis trackers. Said innovations should also be more established in the Swedish market so that CAPEX- and OPEX prices become more accessible.
APA, Harvard, Vancouver, ISO, and other styles
8

Thorstensson, Anton. "Marknadsdeltagande mikroelnät : En tekno-ekonomisk studie av lönsamheten för ett mikroelnät som deltar på elmarknader för flexibilitets- och stödtjänster genom förbrukningsflexibilitet och batterilager." Thesis, Uppsala universitet, Institutionen för fysik och astronomi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-450802.

Full text
Abstract:
This thesis examines the changes in profitability of an investment in a battery energy storage system (BESS) for a property when it, in addition to contributing to local benefits such as peak shaving, also supports the grid through the delivery of primary frequency control services. The Mall of Scandinavia shopping center in Solna acts as study object and is dealt with as a micro grid consisting of the property's loads, PV facility, the BESS and 300 controllable chargers for electric vehicles. Within the study a model is developed for estimating what capacity is available to the primary frequency control market. The result is an evaluation and comparison of the various services that can be delivered from the micro grid. Profitability is improved when the micro grid delivers frequency control in competition with just peak shaving. A combination of multiple services is favorable. The result shows that a BESS at 1 MW and 1 MWh has a payback period of less than 10 years and that the result is mildly sensitive of variations in the assumed parameters.
APA, Harvard, Vancouver, ISO, and other styles
9

Wallander, Anna. "När blir användningen av medieteknik en källa till teknostress för lärare vid universitet?" Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20891.

Full text
Abstract:
Forskning kring arbetsrelaterad stress visar att teknik, tekniska system och program är faktorersom kan komma att orsaka stress hos anställda. Vid universitet har utvecklingen av teknik haftstort inflytande vilket skapar utmaningar för lärare och organisationen att integrera och hanteratekniska förändringar på ett hälsosamt sätt. Studien syftar till att bidra till en ökad förståelse förhur lärare vid universitet upplever att de påverkas av tekniska system och program samt hurimplementering och användning av lärplattformen Canvas upplevs. Via kvantitativenkätundersökning samlades empiriskt material in från 273 respondenter. Materialetanalyserades sedan via univariat-analys och sammanställdes i diagram och tabeller. Enkätensöppna fråga analyserades via innehållsanalys. Studiens resultat visar att en större andel avlärarna upplever tekno-överbelastning, tidsbrist, hög arbetsbelastning och att e-posthanteringenär överväldigande och svår att hinna med under kontorstid. Förekomsten av tekno-invasion,tekno-komplexitet, tekno-otrygghet och tekno-osäkerhet är relativt låg hos en större andel avlärarna men upplevs av 20–30%. Studiens resultat visar också på en positiv upplevelse av ITsupportoch på negativa upplevelser av organisationen underlättande för teknisk kunskap ochinvolvering vid implementering av teknik är bristfällig. Implementeringen och användningen avCanvas upplevs som negativ av en större andel av respondenterna. Slutsatser har dragits att trotslåg förekomst av teknostress finns faktorer som kan påverka arbetssituationen negativt vilketbör vidare undersökas och åtgärdas. Universitet bör erbjuda utökat stöd, avsatt tid ochvidareutbildning för att uppnå en mer tillfredsställande implementering och användning avCanvas.
Research on work-related stress shows that technology, technical systems and programs arefactors that may cause stress in the workplace. At the university, the development of technologyhas had a great influence, which creates challenges for teachers and the organization to integrateand manage technical changes in a healthy way. The aim of this study is to contribute to anincreased understanding of how teachers at universities are affected by technical systems andprograms, and how the implementation and use of the learning platform Canvas is experienced.Through a quantitative survey, empirical material was collected from 273 respondents. Thematerial was analyzed and compiled in diagrams and tables. The open question of the surveywas analyzed through content analysis. The results show that a higher proportion of the teachersexperience techno-overload, lack of time, high workload and overwhelming from email that wasdifficult to cope during office hours. The presence of techno-invasion, techno-complexity,techno-insecurity and techno-uncertainty is low among a higher proportion of the teachers butwas experienced by 20-30%. The results of the study also show a positive experience oftechnical support provision and a negative experience of the literacy facilitation andinvolvement facilitation with a large majority of the teachers. The implementation and use ofCanvas are perceived as negative by a higher proportion of respondents. Conclusions have beendrawn that, despite the low prevalence of technostress, there are factors that can adversely affectthe work situation, which should be further investigated and remedied. Universities should offerextended support, be able to set aside time and further training to achieve a more satisfiedimplementation and use of the platform Canvas.
APA, Harvard, Vancouver, ISO, and other styles
10

Persson, Fredrik. "Energy Storage for Stationary Applications – A Comparative, Techno-Economical Investigation." Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-280016.

Full text
Abstract:
Power outages, electric-grid deficiencies and renewable energies are all examples where stationary energy storages are useful. In this master thesis, two types of stationary electrochemical energy storages are examined; vent-regulated lead-acid batteries (VRLA) and lithium iron phosphate batteries (LFP), to find out the more beneficial one in stationary uses. The techniques are examined for a large range of electric-grid services in a techno-economical investigation. The cost per delivered kWh of the energy storage is the basis of comparison which is calculated using battery degradation data with respect to C-rate, SoC, DoD, temperature, storage time and cycle frequency to estimate calendar and cyclic aging. Modelling presents neither alternative as superior although LFP is the more versatile alternative. VRLA-batteries can be a more cost-beneficial alternative for applications demanding less than 1 cycle/day, at temperatures lower than 30C, short project lifetimes and when utilizing storages beyond 80% EoL. The investment cost is lower for VRLA at equal C-rates. Cost items neglected will decrease the chances of VRLA being the cheapest technique. From a sustainability point of view, LFP is under almost all circumstances the less energy and CO2-intense technology, however recyclability is in clear favor for VRLA.
Strömavbrott, underdimensionerade elnät och förnybar energi är tre exempel där ett stationärt energilager kan tillämpas. I den här masteruppsatsen undersöks två typer av stationära elektrokemiska energilager; ventilreglerade bly-syra-batterier och litium-järnfosfat-batterier (LFP), för att finna det mer fördelaktiga alternativet i stationära applikationer. De två teknikerna analyseras i ett stort antal elnätsapplikationer i en tekno-ekonomisk studie. Kostnaden per levererad kWh av energilagret används som jämförelsebas vilken beräknas utifrån batteridegraderingsdata med avseende på C-rate, SoC, DoD, temperatur, lagringstid och cykelfrekvens för att estimera kalender- och cyklisk åldring. Modellering visar att inget av batterialternativen är överlägset i alla situationer men LFP är det mångsidigare alternativet. Bly-syra-batterier kan vara mer kostnadseffektiva för applikationer som kräver mindre än 1 (full-ekvivalent) cykel/dag vid temperaturer lägre än 30C, korta projektlivstider samt när batterilagren används bortom 80% EoL. Investeringskostnaden är lägre för bly-syra-batterier när likadan C-rate appliceras. Negligerade kostnadsposter kommer minska chanserna att bly-syra-batterier är det billigaste alternativet. Från ett hållbarhetsperspektiv är LFP nästan uteslutande den mindre energikrävande och mindre CO2-intensiva tekniken. Bly-syra-batterier har dock en klar fördel när det kommer till återvinningsbarhet.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "TekNO"

1

Bekir, Miḧemed. Pexşane şîʻrî Kurdî: Tekno-sîmantîkî gutarî şîʻir. Hewlêr [Kurdistan, Iraq]: Dezgay Çap u Biławkirdinewey Aras, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bekr, Miḧemed. Pexşane şı̂ʻirı̂ Kurdı̂: Tekno, sı̂manetı̂kı̂ gotarı̂ şı̂ʻir. Hewlêr [Kurdistan, Iraq]: Dezgay çap u Biławkirdinewey Aras, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Adamos, Takēs. Tekno tēs anankēs: 70 chronia KKE : dokimio. Athēna: Ekdoseis Kastaniōtē, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bekir, Miḧemed. Pexşane şîʻrî Kurdî: Tekno-sîmantîkî gutarî şîʻir. Hewlêr [Kurdistan, Iraq]: Dezgay Çap u Biławkirdinewey Aras, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Samara, Natalē-Christina P. To dikaiōma prosōpikēs epikoinōnias me to anēliko tekno. Athēna: Nomikē Vivliothēkē, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tekno-feste: Uno sguardo compartecipato al circuito illegale dei rave party. Acireale: Bonanno editore, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Malaysia) Seminar Memahami Agama Islam Melalui Tekno-Daei (2003 Kuala Lumpur. Seminar Memahami Agama Islam Melalui Tekno-Daei , 25-26 Februari 2003. Kuala Lumpur]: Institut Kefahaman Islam Malaysia, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tracey, West. Taking care of Tekno, the robotic puppy: The official guide to tricks and training. New York: Scholastic, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Çağdaş üç Tarz-ı siyaset üzerine eleştiri yazıları: Tekno-muhafazakârlık, Kemalizm ve liberal sol'un eleştirisi. Sultanahmet, İstanbul: Dergah Yayınları, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Suherman, Ijang. Kajian tekno ekonomi dan kebijakan peningkatan nilai tambah bauksit, nikel, bijih besi, mangan, dan anode slime. Bandung: Puslitbang Teknologi Mineral dan Batubara, Badan Litbang Energi dan Sumber Daya Mineral, Kementerian Energi dan Sumber Daya Mineral, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "TekNO"

1

Furth, Sebastian, Maximilian Schirm, Volker Belli, and Joachim Baumeister. "TEKNO: Preparing Legacy Technical Documents for Semantic Information Systems." In Natural Language Processing and Information Systems, 429–34. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59569-6_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lombardi, Mauro. "Traiettorie tecno-economiche." In Studi e saggi, 113–32. Florence: Firenze University Press, 2021. http://dx.doi.org/10.36253/978-88-5518-310-9.08.

Full text
Abstract:
Here six techno-economic trajectories are discussed in light of global challenges and the great changes that are taking place in the techno-scientific and social world: digitization of socio-economic processes, smart specialization, environmental sustainability and systemic resilience, knowledge intensive activities, health topics dealt with IA techniques, bio-economy and agri-food. For each trajectory focus area, actors and indicators are proposed.
APA, Harvard, Vancouver, ISO, and other styles
3

Ghosh, Souvik, Alyssa Kleymann, Yashpal Singh Malik, and Nobumichi Kobayashi. "Torque Teno Virus." In Emerging and Transboundary Animal Viruses, 111–22. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0402-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Qumer, Syeda Maseeha, and Geeta Singh. "TECNO Mobile’s Growth Strategies in Africa." In China-Focused Cases, 81–101. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2706-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Czempiel, Tobias, Magdalini Paschali, Matthias Keicher, Walter Simson, Hubertus Feussner, Seong Tae Kim, and Nassir Navab. "TeCNO: Surgical Phase Recognition with Multi-stage Temporal Convolutional Networks." In Medical Image Computing and Computer Assisted Intervention – MICCAI 2020, 343–52. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-59716-0_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Maggi, F., and M. Bendinelli. "Immunobiology of the Torque Teno Viruses and Other Anelloviruses." In Current Topics in Microbiology and Immunology, 65–90. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-70972-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hino, S., and A. A. Prasetyo. "Relationship of Torque Teno Virus to Chicken Anemia Virus." In Current Topics in Microbiology and Immunology, 117–30. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-70972-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hjort, Mette. "Activist filmmaking in Africa, with a focus on Cameroonian Jean-Marie Teno." In Contemporary Radical Film Culture, 100–112. London ; New York : Routledge, 2020. |: Routledge, 2020. http://dx.doi.org/10.4324/9781351006385-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lombardi, Mauro. "La ricerca di uno schema concettuale e di una metodologia appropriati per affrontare le sfide generate dalla dinamica tecno-economica." In Studi e saggi, 89–111. Florence: Firenze University Press, 2021. http://dx.doi.org/10.36253/978-88-5518-310-9.07.

Full text
Abstract:
In this chapter, first three traditional frames centered on innovation processes and innovative strategies are analyzed: Linear Model, National Innovation Systems, Evolutonary Approach to the analysis of economic processes. The reasons that lead us to seek a new conceptual frame, which we define adaptive strategic thinking on the basis of a theoretical and empirical literature, are explained.
APA, Harvard, Vancouver, ISO, and other styles
10

Stamate, T., A. R. Budurca, A. N. Lazar, C. Tamas, and M. Stamate. "Results in brachial plexus palsy after biceps neuro-muscular neurotization associated with neuro-neural neurotization and teno-muscular transfer." In Re-Engineering of the Damaged Brain and Spinal Cord, 141–45. Vienna: Springer Vienna, 2005. http://dx.doi.org/10.1007/3-211-27577-0_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "TekNO"

1

Öztürk, Pelin. "TEKNO-KÜLTÜR VE SANAT İLİŞKİSİNDE DİJİTAL ENSTALASYON." In 4th International Symposium on Innovative Approaches in Architecture, Planning and Design. SETSCI, 2019. http://dx.doi.org/10.36287/setsci.4.7.033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aji, Tri Wahyu, and Naniek Utami Handayani. "Optimum Lead Time Based On Productivity Rate of Workers in PT. Universal Tekno Reksajaya Plant Jakarta." In ICIBE' 18: 2018 4th International Conference on Industrial and Business Engineering. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3288155.3290585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tahmaz, Bener, and Oğuz Atik. "Raflı Tekne Depolama Sistemleri Üzerine bir Araştırma." In 3. Ulusal Deniz Turizmi Sempozyumu. Denizcilik Fakültesi: Dokuz Eylül Üniversitesi, 2016. http://dx.doi.org/10.18872/deu.b.udts.2016.0031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Andrade, Magda Maria Guimarães, and Teofilo Teixeira Branco Jr. "Um “Ambiente tecno-criativo” para promover a eParticipação." In 14th CONTECSI International Conference on Information Systems and Technology Management. TECSI, 2017. http://dx.doi.org/10.5748/9788599693131-14contecsi/ps-4775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Analoui, M., M. Beheshti, Maryam Tayefeh Mahmoudi, and Z. Jadidi. "Tecno-Streams approach for content-based image retrieval." In 2010 Second World Congress on Nature and Biologically Inspired Computing (NaBIC 2010). IEEE, 2010. http://dx.doi.org/10.1109/nabic.2010.5716300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Altınkaya, Özgür, and Oğuz Atik. "Türkiye deki Yat Limanlarında Tekne Güvenliği Üzerine bir Araştırma." In 3. Ulusal Deniz Turizmi Sempozyumu. Denizcilik Fakültesi: Dokuz Eylül Üniversitesi, 2016. http://dx.doi.org/10.18872/deu.b.udts.2016.0012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Palhaci, Maria, Ricardo Nicola, and Luiz Hellmeisteir. "O processo de construção tecno-artística por meio da reciclagem." In VIII International Conference on Engineering and Computer Education. Science and Education Research Council (COPEC), 2013. http://dx.doi.org/10.14684/icece.08.2013.406-410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Calle-Cancho, Jesús, Javier Carmona-Murillo, David Cortés-Polo, and José-Luis González-Sánchez. "ANÁLISIS TECNO-ECONÓMICO DEL DESPLIEGUE DE UNA ARQUITECTURA DE RED VIRTUALIZADA." In Atas da conferência Ibero-Americana WWW/Internet 2019. IADIS Press, 2019. http://dx.doi.org/10.33965/ciawi2019_201914c037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Perez Perez, Mario Frank, and Ana Paternina. "Caracterización Fisicoquímica y Tecno-funcional de Almidones de Ñame (Dioscórea spp)." In The 16th LACCEI International Multi-Conference for Engineering, Education, and Technology: “Innovation in Education and Inclusion”. Latin American and Caribbean Consortium of Engineering Institutions, 2018. http://dx.doi.org/10.18687/laccei2018.1.1.164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Igličar, Albin. "Pravo kot nujni (vendar ne zadostni) pogoj organizacije." In Organizations at Innovation and Digital Transformation Roundabout: Conference Proceedings. University of Maribor Press, 2020. http://dx.doi.org/10.18690/978-961-286-388-3.20.

Full text
Abstract:
Med bistvene pogoje za dobro delovanje organizacije spadajo tudi pravne norme. Z njimi je dosežena potrebna predvidljivost in varnost v delovanju posameznih delov organizacije in njenih članov. V javnem življenju nastopajo organizirane oblike združevanja kot pravne osebe. Zato obstaja veliko povezovalnih točk med organizacijo in pravno osebo. Enako pa je potrebno pri pravni regulaciji organizacij tesno sodelovanje med strokovnjaki s področja organizacije in strokovnjaki s področja prava.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "TekNO"

1

Basco, Ana Inés, and Paula Garnero. La tecno-integración de América Latina: Instituciones, comercio exponencial y equidad en la era de los algoritmos. Inter-American Development Bank, November 2017. http://dx.doi.org/10.18235/0000918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Serrano Villalobos, O., L. Martínez Martínez, and JI Niño González. Tecno-adicción al sexo en la población juvenil: Propuesta de ítems para el diseño de una escala de detección y cribado. Revista Latina de Comunicación Social, January 2018. http://dx.doi.org/10.4185/rlcs-2018-1248.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography